| Age | Commit message (Collapse) | Author |
|---|
|
txgbe clkdev shortened clk_name, so i2c_dev info_name
also need to shorten. Otherwise, i2c_dev cannot initialize
clock.
Fixes: e30cef001da2 ("net: txgbe: fix clk_name exceed MAX_DEV_ID limits")
Signed-off-by: Duanqiang Wen <duanqiangwen@net-swift.com>
Link: https://lore.kernel.org/r/20240402021843.126192-1-duanqiangwen@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Setting mac_managed_pm during interface up is too late.
In situations where the link is not brought up yet and the system suspends
the regular PHY power management will run. Since the FEC ETHEREN control
bit is cleared (automatically) on suspend the controller is off in resume.
When the regular PHY power management resume path runs in this context it
will write to the MII_DATA register but nothing will be transmitted on the
MDIO bus.
This can be observed by the following log:
fec 5b040000.ethernet eth0: MDIO read timeout
Microchip LAN87xx T1 5b040000.ethernet-1:04: PM: dpm_run_callback(): mdio_bus_phy_resume+0x0/0xc8 returns -110
Microchip LAN87xx T1 5b040000.ethernet-1:04: PM: failed to resume: error -110
The data written will however remain in the MII_DATA register.
When the link later is set to administrative up it will trigger a call to
fec_restart() which will restore the MII_SPEED register. This triggers the
quirk explained in f166f890c8f0 ("net: ethernet: fec: Replace interrupt
driven MDIO with polled IO") causing an extra MII_EVENT.
This extra event desynchronizes all the MDIO register reads, causing them
to complete too early. Leading all reads to read as 0 because
fec_enet_mdio_wait() returns too early.
When a Microchip LAN8700R PHY is connected to the FEC, the 0 reads causes
the PHY to be initialized incorrectly and the PHY will not transmit any
ethernet signal in this state. It cannot be brought out of this state
without a power cycle of the PHY.
Fixes: 557d5dc83f68 ("net: fec: use mac-managed PHY PM")
Closes: https://lore.kernel.org/netdev/1f45bdbe-eab1-4e59-8f24-add177590d27@actia.se/
Signed-off-by: Wei Fang <wei.fang@nxp.com>
[jernberg: commit message]
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Link: https://lore.kernel.org/r/20240328155909.59613-2-john.ernberg@actia.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function using this is hidden in an #ifdef, so the variable
needs the same one for a clean W=1 build:
drivers/i2c/busses/i2c-pxa.c:327:26: error: 'icr_bits' defined but not used [-Werror=unused-const-variable=]
Fixes: d6a7b5f84b5c ("[ARM] 4827/1: fix two warnings in drivers/i2c/busses/i2c-pxa.c")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Since mbox_cmd.size_out is overwritten with the actual output size in
the function below, it needs to be initialized every time.
cxl_internal_send_cmd -> __cxl_pci_mbox_send_cmd
Problem scenario:
1) The size_out variable is initially set to the size of the mailbox.
2) Read an event.
- size_out is set to 160 bytes(header 32B + one event 128B).
- Two event are created while reading.
3) Read the new *two* events.
- size_out is still set to 160 bytes.
- Although the value of out_len is 288 bytes, only 160 bytes are
copied from the mailbox register to the local variable.
- record_count is set to 2.
- Accessing records[1] will result in reading incorrect data.
Fixes: 6ebe28f9ec72 ("cxl/mem: Read, trace, and clear events on driver load")
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Kwangjin Ko <kwangjin.ko@sk.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
In the very rare case where a packet type is unknown to the driver,
idpf_rx_process_skb_fields would return early without calling
eth_type_trans to set the skb protocol / the network layer handler.
This is especially problematic if tcpdump is running when such a
packet is received, i.e. it would cause a kernel panic.
Instead, call eth_type_trans for every single packet, even when
the packet type is unknown.
Fixes: 3a8845af66ed ("idpf: add RX splitq napi poll support")
Reported-by: Balazs Nemeth <bnemeth@redhat.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Salvatore Daniele <sdaniele@redhat.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Addressing potential overflow in result of multiplication of two lower
precision (u32) operands before widening it to higher precision
(u64).
-v2
Fix commit message and description. (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401175300.3823653-1-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This null check is bogus because we are already using 'ce' stuff
in many places before this function is called.
Having this here is useless and confuses static analyzer tools
that can see:
struct intel_engine_cs *engine = ce->engine;
before this check, in the same function.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202403101225.7AheJhZJ-lkp@intel.com/
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328213107.90632-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
ICL supposedly doesn't support FEC on MST. Reject it.
Cc: stable@vger.kernel.org
Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path")
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-7-ville.syrjala@linux.intel.com
(cherry picked from commit b648ce2a28ba83c4fa67c61fcc5983e15e9d4afb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The MST code currently assumes that glk+ already supports MST+DSC,
which is incorrect. We need to check for TGL+ actually. ICL does
support SST+DSC, but supposedly it can't do MST+FEC which will
also rule out MST+DSC.
Note that a straight TGL+ check doesn't work here because DSC
support can get fused out, so we do need to also check 'has_dsc'.
Cc: stable@vger.kernel.org
Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path")
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-6-ville.syrjala@linux.intel.com
(cherry picked from commit c9c92f286dbdf872390ef3e74dbe5f0641e46f55)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
For DISPLAY < 13, compressed bpp is chosen from a list of
supported compressed bpps. Fix the condition to choose the
appropriate compressed bpp from the list.
Fixes: 1c56e9a39833 ("drm/i915/dp: Get optimal link config to have best compressed bpp")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.7+
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10162
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240305054443.2489895-1-ankit.k.nautiyal@intel.com
(cherry picked from commit 5a1da42b50f3594e18738885c2f23ed36629dd00)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Enable only one CCS engine by default with all the compute sices
allocated to it.
While generating the list of UABI engines to be exposed to the
user, exclude any additional CCS engines beyond the first
instance.
This change can be tested with igt i915_query.
Fixes: d2eae8e98d59 ("drm/i915/dg2: Drop force_probe requirement")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: <stable@vger.kernel.org> # v6.2+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328073409.674098-4-andi.shyti@linux.intel.com
(cherry picked from commit 2bebae0112b117de7e8a7289277a4bd2403b9e17)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We want a fixed load CCS balancing consisting in all slices
sharing one single user engine. For this reason do not create the
intel_engine_cs structure with its dedicated command streamer for
CCS slices beyond the first.
Fixes: d2eae8e98d59 ("drm/i915/dg2: Drop force_probe requirement")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: <stable@vger.kernel.org> # v6.2+
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328073409.674098-3-andi.shyti@linux.intel.com
(cherry picked from commit c7a5aa4e57f88470313a8277eb299b221b86e3b1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The hardware should not dynamically balance the load between CCS
engines. Wa_14019159160 recommends disabling it across all
platforms.
Fixes: d2eae8e98d59 ("drm/i915/dg2: Drop force_probe requirement")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: <stable@vger.kernel.org> # v6.2+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328073409.674098-2-andi.shyti@linux.intel.com
(cherry picked from commit f5d2904cf814f20b79e3e4c1b24a4ccc2411b7e0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Commit 9bb66c179f50 ("drm/i915: Reserve some kernel space per
vm") reduces the available VM space of one page in order to apply
Wa_16018031267 and Wa_16018063123.
This page was reserved indiscrimitely in all platforms even when
not needed. Limit it to DG2 onwards.
Fixes: 9bb66c179f50 ("drm/i915: Reserve some kernel space per vm")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240327200546.640108-1-andi.shyti@linux.intel.com
(cherry picked from commit 9721634441d5dedba7f9eebb2bf0c9411cbafc4e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently we are not aligning selective update area to cover cursor fully
when cursor is not updated by itself but still in the selective update
area. Fix this by checking cursor separately after
drm_atomic_add_affected_planes.
Bspec: 68927
Fixes: 1bff93b8bc27 ("drm/i915/psr: Extend SU area to cover cursor fully if needed")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319123327.1661097-4-jouni.hogander@intel.com
(cherry picked from commit d37b3dac68e26669f03f768b3afc9abc094c9ac9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently PIPE_SRCSZ_ERLY_TPT is written in
intel_display.c:intel_set_pipe_src_size. This doesn't work as
intel_set_pipe_src_size is called only on modeset.
Bspec: 68927
Fixes: 3291bbb93e16 ("drm/i915/psr: Configure PIPE_SRCSZ_ERLY_TPT for psr2 early transport")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319123327.1661097-3-jouni.hogander@intel.com
(cherry picked from commit b52c4093b0c9089b00b42823d41986a94d32e341)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
When early transport is enabled we need to write PIPE_SRCSZ_ERLY_TPT on
every flip doing selective update. This patch calculates
PIPE_SRCSZ_ERLY_TPT same way as is done for PSR2_MAN_TRK_CTL value and
stores i in intel_crtc_state->pipe_srcsz_early_tpt to be written later
during flip.
Bspec: 68927
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319123327.1661097-2-jouni.hogander@intel.com
(cherry picked from commit f3b899f0b4b17fa0b20e27c23f78604d5686383d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
You can bind whatever action you want to the mouse's reprogrammable
buttons using Windows application. Allow Linux to receive multimedia keycodes.
Fixes: 3ed224e273ac ("HID: logitech-dj: Fix 064d:c52f receiver support")
Signed-off-by: Yaraslau Furman <yaro330@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
ice_port_vlan_on/off() was introduced in commit 2946204b3fa8 ("ice:
implement bridge port vlan"). But ice_port_vlan_on() incorrectly assigns
ena_rx_filtering to inner_vlan_ops in DVM mode.
This causes an error when rx_filtering cannot be enabled in legacy mode.
Reproducer:
echo 1 > /sys/class/net/$PF/device/sriov_numvfs
ip link set $PF vf 0 spoofchk off trust on vlan 3
dmesg:
ice 0000:41:00.0: failed to enable Rx VLAN filtering for VF 0 VSI 9 during VF rebuild, error -95
Fixes: 2946204b3fa8 ("ice: implement bridge port vlan")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Automatically cleaned up pointers need to be initialized before exiting
their scope. In this case, they need to be initialized to NULL before
any return statement.
Fixes: 90f821d72e11 ("ice: avoid unnecessary devm_ usage")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
IPA probe function was recently refactored to perform extra error checks
and make sure the thermal zone has trip points necessary for the IPA
operation. With this change, if a thermal zone is probed such that it
has no trip points that IPA can use, IPA will fail and the TZ won't be
created. This is the case if a platform defines a TZ without cooling
devices and only with "hot"/"critical" trip points, often found on some
Qualcomm devices [1].
Documentation across IPA code (notably get_governor_trips() kerneldoc)
suggests that IPA is supposed to handle such TZ even if it won't
actually do anything.
This commit partially reverts the previous change to allow IPA to bind
to such "empty" thermal zones.
Fixes: e83747c2f8e3 ("thermal: gov_power_allocator: Set up trip points earlier")
Link: arch/arm64/boot/dts/qcom/sc7180.dtsi#n4776 # [1]
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
IPA was recently refactored to split out memory allocation into a
separate funciton. That funciton was made to return -EINVAL if there is
zero power_actors and thus no memory to allocate. This causes IPA to
fail probing when the thermal zone has no attached cooling devices.
Since cooling devices can attach after the thermal zone is created and
the governer is attached to it, failing probe due to the lack of cooling
devices is incorrect.
Change the allocate_actors_buffer() to return success when there is no
cooling devices present.
Fixes: 912e97c67cc3 ("thermal: gov_power_allocator: Move memory allocation out of throttle()")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Preempt fences can sleep waiting for an exec queue suspend operation to
complete. If the system_unbound_wq is used for waiting and the number of
waiters exceeds max_active this will result in other users of the
system_unbound_wq getting starved. Use a device private work queue for
preempt fences to avoid starvation of the system_unbound_wq.
Even though suspend operations can complete out-of-order, all suspend
operations within a VM need to complete before the preempt rebind worker
can start. With that, use a device private ordered wq for preempt fence
waiting.
v2:
- Add comment about cleanup on failure (Matt R)
- Update commit message (Lucas)
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401221913.139672-2-matthew.brost@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
There is no reason to make this debugfs file for a simple
boolean so complicated. Just use debugfs_create_bool().
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-8-ville.syrjala@linux.intel.com
|
|
ICL supposedly doesn't support FEC on MST. Reject it.
Cc: stable@vger.kernel.org
Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path")
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-7-ville.syrjala@linux.intel.com
|
|
The MST code currently assumes that glk+ already supports MST+DSC,
which is incorrect. We need to check for TGL+ actually. ICL does
support SST+DSC, but supposedly it can't do MST+FEC which will
also rule out MST+DSC.
Note that a straight TGL+ check doesn't work here because DSC
support can get fused out, so we do need to also check 'has_dsc'.
Cc: stable@vger.kernel.org
Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path")
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-6-ville.syrjala@linux.intel.com
|
|
Simplify our life by extracting the "do we need the glk scaler
clock gating w/a?" check into a small helper.
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-5-ville.syrjala@linux.intel.com
|
|
glk_pipe_scaler_clock_gating_wa() is messy. Clean it up via
intel_de_rmw(), and also just pass in the whole crtc so the
caller doesn't have to dance around so much.
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-4-ville.syrjala@linux.intel.com
|
|
Move some of the more trivial checks in the DP .mode_valid()
hooks upwards to lessen the noise amongst the more complex
checks.
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-3-ville.syrjala@linux.intel.com
|
|
We never set connector->doublescan_allowed, so the probe helper
already filters out all doublescan modes for us.
Sadly we still need to keep the explicit doublescan checks
in .compute_config as outlined in commit e4dd27aadd20
("drm/i915: Allow DBLSCAN user modes with eDP/LVDS/DSI")
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-2-ville.syrjala@linux.intel.com
|
|
In af93a167eda9, i2c_hid_parse was changed to continue with reading the
report descriptor before waiting for reset to be acknowledged.
This has lead to two regressions:
1. We fail to handle reset acknowledgment if it happens while reading
the report descriptor. The transfer sets I2C_HID_READ_PENDING, which
causes the IRQ handler to return without doing anything.
This affects both a Wacom touchscreen and a Sensel touchpad.
2. On a Sensel touchpad, reading the report descriptor this quickly
after reset results in all zeroes or partial zeroes.
The issues were observed on the Lenovo Thinkpad Z16 Gen 2.
The change in question was made based on a Microsoft article[0] stating
that Windows 8 *may* read the report descriptor in parallel with
awaiting reset acknowledgment, intended as a slight reset performance
optimization. Perhaps they only do this if reset is not completing
quickly enough for their tastes?
As the code is not currently ready to read registers in parallel with a
pending reset acknowledgment, and as reading quickly breaks the report
descriptor on the Sensel touchpad, revert to waiting for reset
acknowledgment before proceeding to read the report descriptor.
[0]: https://learn.microsoft.com/en-us/windows-hardware/drivers/hid/plug-and-play-support-and-power-management
Fixes: af93a167eda9 ("HID: i2c-hid: Move i2c_hid_finish_hwreset() to after reading the report-descriptor")
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2271136
Cc: stable@vger.kernel.org
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
Link: https://lore.kernel.org/r/20240331182440.14477-1-kl@kl.wtf
[hdegoede@redhat.com Drop no longer necessary abort_reset error exit path]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This patch is regarding the recent addition of support for the NSO
controllers to hid-nintendo. All controllers are working correctly with the
exception of the N64 controller, which is being identified as a mouse by
udev. This results in the joystick controlling the mouse cursor and the
controller not being detected by games.
The reason for this is because the N64's C buttons have been attributed to
BTN_FORWARD, BTN_BACK, BTN_LEFT, BTN_RIGHT, which are buttons typically
attributed to mice.
This patch changes those buttons to controller buttons, making the
controller be correctly identified as such.
Signed-off-by: Nuno Pereira <nf.pereira@outlook.pt>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
kobject_get() errors
When a gpiochip gets added by loading a module, then another driver may
be waiting for that gpiochip to load on the deferred-probe list.
If the deferred-probe for the consumer of gpiochip then triggers between
the gpiodev_add_to_list_unlocked() calls which makes gpio_device_find()
see the chip and the gpiochip_setup_dev() later then gpio_device_find()
does a kobject_get() on an uninitialized kobject since the kobject is
initialized by gpiochip_setup_dev() calling device_initialize():
arizona spi-10WM5102:00: cannot find GPIO chip arizona, deferring
arizona spi-10WM5102:00: cannot find GPIO chip arizona, deferring
------------[ cut here ]------------
kobject: 'gpiochip5' (00000000241466f2): is not initialized, yet kobject_get() is being called.
WARNING: CPU: 3 PID: 42 at lib/kobject.c:640 kobject_get+0x43/0x70
Call Trace:
kobject_get
gpio_device_find
gpiod_find_and_request
gpiod_get
snd_byt_wm5102_mc_probe
Not only is the device not initialized yet, but when the gpio-device is
added to the list things like the irqchip also have not been initialized
yet.
So gpio_device_find() should really ignore the gpio-device until
gpiochip_add_data_with_key() is fully done. Add a device_is_registered()
check to gpio_device_find() to ignore gpio-devices on the list which are
not yet fully initialized.
Fixes: aab5c6f20023 ("gpio: set device type for GPIO chips")
Suggested-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
[Bartosz: fix a typo in commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
If the RBUF logic is not reset when the kernel starts then there
may be some data left over from any network boot loader. If the
64-byte packet headers are enabled then this can be fatal.
Extend bcmgenet_dma_disable to do perform the reset, but not when
called from bcmgenet_resume in order to preserve a wake packet.
N.B. This different handling of resume is just based on a hunch -
why else wouldn't one reset the RBUF as well as the TBUF? If this
isn't the case then it's easy to change the patch to make the RBUF
reset unconditional.
See: https://github.com/raspberrypi/linux/issues/3850
See: https://github.com/raspberrypi/firmware/issues/1882
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Maarten Vanraes <maarten@rmail.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In function pci1xxxx_spi_probe, there is a potential null pointer that
may be caused by a failed memory allocation by the function devm_kzalloc.
Hence, a null pointer check needs to be added to prevent null pointer
dereferencing later in the code.
To fix this issue, spi_bus->spi_int[iter] should be checked. The memory
allocated by devm_kzalloc will be automatically released, so just directly
return -ENOMEM without worrying about memory leaks.
Fixes: 1cc0cbea7167 ("spi: microchip: pci1xxxx: Add driver for SPI controller of PCI1XXXX PCIe switch")
Signed-off-by: Huai-Yuan Liu <qq810974084@gmail.com>
Link: https://msgid.link/r/20240403014221.969801-1-qq810974084@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
devm_spi_alloc_controller will allocate an SPI controller and
automatically release a reference on it when dev is unbound from
its driver. It doesn't need to call spi_controller_put explicitly
to put the reference when lpspi driver failed initialization.
Fixes: 2ae0ab0143fc ("spi: lpspi: Avoid potential use-after-free in probe()")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://msgid.link/r/20240403084029.2000544-1-carlos.song@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In rvu_map_cgx_lmac_pf() the 'iter', which is used as an array index, can reach
value (up to 14) that exceed the size (MAX_LMAC_COUNT = 8) of the array.
Fix this bug by adding 'iter' value check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 91c6945ea1f9 ("octeontx2-af: cn10k: Add RPM MAC support")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The kernel doc says this function returns either a valid pointer
or an ERR_PTR(), but in practice this function can return NULL if
create=false. Fix the function to match the doc (return
ERR_PTR(-ENOENT) instead of NULL) and adjust all call-sites
accordingly.
Fixes: 4bdca1150792 ("drm/panthor: Add the driver frontend block")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402141412.1707949-1-harshit.m.mogalapalli@oracle.com
|
|
The devm_drm_dev_alloc() function returns error pointers.
Update the error handling to check for error pointers instead of NULL.
Fixes: 4bdca1150792 ("drm/panthor: Add the driver frontend block")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104041.1689951-1-harshit.m.mogalapalli@oracle.com
|
|
The ->iface.streams[csg_slot][] array has MAX_CS_PER_CSG elements so
this > comparison needs to be >= to prevent an out of bounds access.
Fixes: 2718d91816ee ("drm/panthor: Add the FW logical block")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/62835c16-c85c-483d-a8fe-63be78d49d15@moroto.mountain
|
|
This code accidentally returns zero/success on error because of a typo.
It should be "irq" instead of "ret". The other thing is that if
platform_get_irq_byname() were to return zero then the error code would
be cmplicated. Fortunately, it does not so we can just change <= to
< 0.
Fixes: 5cd894e258c4 ("drm/panthor: Add the GPU logical block")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d753e684-43ee-45c2-a1fd-86222da204e1@moroto.mountain
|
|
These error paths forgot to set the error code to -ENOMEM.
Fixes: 647810ec2476 ("drm/panthor: Add the MMU/VM logical block")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cf5bbba5-427e-4940-b91e-925f9fa71f8d@moroto.mountain
|
|
When compiling with W=1 the build process will flag empty comments,
misnamed documented variables and incorrect tagging of functions.
Fix them in one go.
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402215423.360341-2-liviu.dudau@arm.com
|
|
Commit 962f88b9c916 ("drm/panthor: Drop the dev_enter/exit() sections in
_irq_suspend/resume()") removed the code that used the 'cookie' variable
but left the declaration in place. Remove it.
Fixes: 962f88b9c916 ("drm/panthor: Drop the dev_enter/exit() sections in _irq_suspend/resume()")
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402215423.360341-1-liviu.dudau@arm.com
|
|
On some boards with this chip version the BIOS is buggy and misses
to reset the PHY page selector. This results in the PHY ID read
accessing registers on a different page, returning a more or
less random value. Fix this by resetting the page selector first.
Fixes: f1e911d5d0df ("r8169: add basic phylib support")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/64f2055e-98b8-45ec-8568-665e3d54d4e6@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 0d82a0d6f5561af8dea7011d1b7cae510021723e.
The commit failed to take into account that the parameter duplication
and debugfs for char * parameters were subtly different between i915
core and display, and caused the DMC and PM to be disabled. Moreover,
the patch was pushed with failing CI results. Revert, and get back to
the drawing board.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Some laptops where the thermal control is handled by the EC may
provide trip points that fail the kernels new validation, but still have
working temperature sensors. An example of this is the Framework 13 AMD.
This patch allows the thermal zone to still be registered without trip
points if the trip points fail validation, allowing the temperature
sensor to be viewed and used by the user.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218586
Fixes: 9c8647224e9f ("ACPI: thermal: Use library functions to obtain trip point temperature values")
Signed-off-by: Stephen Horvath <s.horvath@outlook.com.au>
[ rjw: Subject edits, remove redundant braces ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This workaround applies to RCS engine's context, hence added as
LRC workaround.
v2
- Fix commit description as lrc workaround instead of engine.(Lucas)
v3
- COMMON_SLICE_CHICKEN1 is a masked register, add XE_REG_OPTION_MASKED
flag. (Matt)
BSPEC: 55899
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401163806.3821128-1-himal.prasad.ghimiray@intel.com
|
|
The flags stored in the BO grew over time without following
much a naming pattern. First of all, get rid of the _BIT suffix that was
banned from everywhere else due to the guideline in
drivers/gpu/drm/i915/i915_reg.h that xe kind of follows:
Define bits using ``REG_BIT(N)``. Do **not** add ``_BIT`` suffix to the name.
Here the flags aren't for a register, but it's good practice to keep it
consistent.
Second divergence on names is the use or not of "CREATE". This is
because most of the flags are passed to xe_bo_create*() family of
functions, changing its behavior. However, since the flags are also
stored in the bo itself and checked elsewhere in the code, it seems
better to just omit the CREATE part.
With those 2 guidelines, all the flags are given the form
XE_BO_FLAG_<FLAG_NAME> with the following commands:
git grep -le "XE_BO_" -- drivers/gpu/drm/xe | xargs sed -i \
-e "s/XE_BO_\([_A-Z0-9]*\)_BIT/XE_BO_\1/g" \
-e 's/XE_BO_CREATE_/XE_BO_FLAG_/g'
git grep -le "XE_BO_" -- drivers/gpu/drm/xe | xargs sed -i -r \
-e 's/XE_BO_(DEFER_BACKING|SCANOUT|FIXED_PLACEMENT|PAGETABLE|NEEDS_CPU_ACCESS|NEEDS_UC|INTERNAL_TEST|INTERNAL_64K|GGTT_INVALIDATE)/XE_BO_FLAG_\1/g'
And then the defines in drivers/gpu/drm/xe/xe_bo.h are adjusted to
follow the coding style.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322142702.186529-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
It's quite redundant to pass XE_BO_CREATE_USER_BIT to
xe_bo_create_user() since the only difference of that function is to
force that flag. Stop passing the flag in the few cases that were
explicitly doing so.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322142702.186529-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
