summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-04-22drm/panel: add Khadas TS050 V2 panel supportJacobe Zang
This add Khadas TS050 V2 Panel and make it compatible with old one. Controller of V2 panel is "Himax HX8399-C" and the old panel is "NT35596". In driver file, the only different between them is the timing squence. Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240419014852.715125-3-jacobe.zang@wesion.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240419014852.715125-3-jacobe.zang@wesion.com
2024-04-22net: usb: qmi_wwan: add Telit FN920C04 compositionsDaniele Palmas
Add the following Telit FN920C04 compositions: 0x10a0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a4: rmnet + tty (AT) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a4 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a9: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a9 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-22wifi: iwlwifi: mvm: fix link ID managementJohannes Berg
On older (pre-MLD API) devices, we started also calling iwl_mvm_set_link_mapping()/iwl_mvm_unset_link_mapping(), but of course not also iwl_mvm_remove_link(). Since the link ID was only released in iwl_mvm_remove_link() this causes us to run out of FW link IDs very quickly. Fix it by releasing the link ID correctly. Fixes: a8b5d4809b50 ("wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW") Link: https://msgid.link/20240420154435.dce72db5d5e3.Ic40b454b24f1c7b380a1eedf67455d9cf2f58541@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-22drm/panthor: clean up some types in panthor_sched_suspend()Dan Carpenter
These variables should be u32 instead of u64 because they're only storing u32 values. Also static checkers complain when we do: suspended_slots &= ~upd_ctx.timedout_mask; In this code "suspended_slots" is a u64 and "upd_ctx.timedout_mask". The mask clears out the top 32 bits which would likely be a bug if anything were stored there. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/85356b15-4840-4e64-8c75-922cdd6a5fef@moroto.mountain
2024-04-22Backmerge tag 'v6.9-rc5' into drm-nextDave Airlie
Linux 6.9-rc5 I've had a persistent msm failure on clang, and the fix is in fixes so just pull it back to fix that. Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-04-22Merge tag 'drm-misc-next-2024-04-19' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.10-rc1: UAPI Changes: - Add SIZE_HINTS property for cursor planes. Cross-subsystem Changes: Core Changes: - Document the requirements and expectations of adding new driver-specific properties. - Assorted small fixes to ttm. - More Kconfig fixes. - Add struct drm_edid_product_id and helpers. - Use drm device based logging in more drm functions. - Fixes for drm-panic, and option to test it. - Assorted small fixes and updates to edid. - Add drm_crtc_vblank_crtc and use it in vkms, nouveau. Driver Changes: - Assorted small fixes and improvements to bridge/imx8mp-hdmi-tx, nouveau, ast, qaic, lima, vc4, bridge/anx7625, mipi-dsi. - Add drm panic to simpledrm, mgag200, imx, ast. - Use dev_err_probe in bridge/panel drivers. - Add Innolux G121X1-L03, LG sw43408 panels. - Use struct drm_edid in i915 bios parsing. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2dc1b7c6-1743-4ddd-ad42-36f700234fbe@linux.intel.com
2024-04-22Merge tag 'amd-drm-next-6.10-2024-04-19' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.10-2024-04-19: amdgpu: - DC resource allocation logic updates - DC IPS fixes - DC YUV fixes - DMCUB fixes - DML2 fixes - Devcoredump updates - USB-C DSC fix - Misc display code cleanups - PSR fixes - MES timeout fix - RAS updates - UAF fix in VA IOCTL - Fix visible VRAM handling during faults - Fix IP discovery handling during PCI rescans - Misc code cleanups - PSP 14 updates - More runtime PM code rework - SMU 14.0.2 support - GPUVM page fault redirection to secondary IH rings for IH 6.x - Suspend/resume fixes - SR-IOV fixes amdkfd: - Fix eviction fence handling - Fix leak in GPU memory allocation failure case - DMABuf import handling fix radeon: - Silence UBSAN warnings related to flexible arrays Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240419224332.2938259-1-alexander.deucher@amd.com
2024-04-21Merge tag 'char-misc-6.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver fixes from Greg KH: "Here are some small char/misc and other driver fixes for 6.9-rc5. Included in here are the following: - binder driver fix for reported problem - speakup crash fix - mei driver fixes for reported problems - comdei driver fix - interconnect driver fixes - rtsx driver fix - peci.h kernel doc fix All of these have been in linux-next for over a week with no reported problems" * tag 'char-misc-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: peci: linux/peci.h: fix Excess kernel-doc description warning binder: check offset alignment in binder_get_object() comedi: vmk80xx: fix incomplete endpoint checking mei: vsc: Unregister interrupt handler for system suspend Revert "mei: vsc: Call wake_up() in the threaded IRQ handler" misc: rtsx: Fix rts5264 driver status incorrect when card removed mei: me: disable RPL-S on SPS and IGN firmwares speakup: Avoid crash on very long word interconnect: Don't access req_list while it's being manipulated interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM
2024-04-21Merge tag 'tty-6.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for 6.9-rc5 that resolve a bunch of reported problems. Included in here are: - MAINTAINERS and .mailmap update for Richard Genoud - serial core regression fixes from 6.9-rc1 changes - pci id cleanups - serial core crash fix - stm32 driver fixes - 8250 driver fixes All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: stm32: Reset .throttled state in .startup() serial: stm32: Return IRQ_NONE in the ISR if no handling happend serial: core: Fix missing shutdown and startup for serial base port serial: core: Clearing the circular buffer before NULLifying it MAINTAINERS: mailmap: update Richard Genoud's email address serial/pmac_zilog: Remove flawed mitigation for rx irq flood serial: 8250_pci: Remove redundant PCI IDs serial: core: Fix regression when runtime PM is not enabled serial: mxs-auart: add spinlock around changing cts state serial: 8250_dw: Revert: Do not reclock if already at correct rate serial: 8250_lpc18xx: disable clks on error in probe()
2024-04-21Merge tag 'usb-6.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt driver fixes from Greg KH: "Here are some small USB and Thunderbolt driver fixes for 6.9-rc5. Included in here are: - MAINTAINER file update for invalid email address - usb-serial device id updates - typec driver fixes - thunderbolt / usb4 driver fixes - usb core shutdown fixes - cdc-wdm driver revert for reported problem in -rc1 - usb gadget driver fixes - xhci driver fixes All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) USB: serial: option: add Telit FN920C04 rmnet compositions usb: dwc3: ep0: Don't reset resource alloc flag Revert "usb: cdc-wdm: close race between read and workqueue" USB: serial: option: add Rolling RW101-GL and RW135-GL support USB: serial: option: add Lonsung U8300/U9300 product USB: serial: option: add support for Fibocom FM650/FG650 USB: serial: option: support Quectel EM060K sub-models USB: serial: option: add Fibocom FM135-GL variants usb: misc: onboard_usb_hub: Disable the USB hub clock on failure thunderbolt: Avoid notify PM core about runtime PM resume thunderbolt: Fix wake configurations after device unplug usb: dwc2: host: Fix dereference issue in DDMA completion flow. usb: typec: mux: it5205: Fix ChipID value typo MAINTAINERS: Drop Li Yang as their email address stopped working usb: gadget: fsl: Initialize udc before using it usb: Disable USB3 LPM at shutdown usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error usb: typec: tcpm: Correct the PDO counting in pd_set usb: gadget: functionfs: Wait for fences before enqueueing DMABUF usb: gadget: functionfs: Fix inverted DMA fence direction ...
2024-04-20Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A couple clk driver fixes, a build fix, and a deadlock fix: - Mediatek mt7988 has broken PCIe because the wrong parent is used - Mediatek clk drivers may deadlock when registering their clks because the clk provider device is repeatedly runtime PM resumed and suspended during probe and clk registration. Resuming the clk provider device deadlocks with an ABBA deadlock due to genpd_lock and the clk prepare_lock. The fix is to keep the device runtime resumed while registering clks. - Another runtime PM related deadlock, this time with disabling unused clks during late init. We get an ABBA deadlock where a device is runtime PM resuming (or suspending) while the disabling of unused clks is happening in parallel. That runtime PM action calls into the clk framework and tries to grab the clk prepare_lock while the disabling of unused clks holds the prepare_lock and is waiting for that runtime PM action to complete. The fix is to runtime resume all the clk provider devices before grabbing the clk prepare_lock during disable unused. - A build fix to provide an empty devm_clk_rate_exclusive_get() function when CONFIG_COMMON_CLK=n" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: mediatek: mt7988-infracfg: fix clocks for 2nd PCIe port clk: mediatek: Do a runtime PM get on controllers during probe clk: Get runtime PM before walking tree for clk_summary clk: Get runtime PM before walking tree during disable_unused clk: Initialize struct clk_core kref earlier clk: Don't hold prepare_lock when calling kref_put() clk: Remove prepare_lock hold assertion in __clk_release() clk: Provide !COMMON_CLK dummy for devm_clk_rate_exclusive_get()
2024-04-19mlxsw: pci: Fix driver initialization with old firmwareIdo Schimmel
The driver queries the Management Capabilities Mask (MCAM) register during initialization to understand if a new and deeper reset flow is supported. However, not all firmware versions support this register, leading to the driver failing to load. Fix by treating an error in the register query as an indication that the feature is not supported. Fixes: f257c73e5356 ("mlxsw: pci: Add support for new reset flow") Reported-by: Tim 'mithro' Ansell <me@mith.ro> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/ee968c49d53bac96a4c66d1b09ebbd097d81aca5.1713446092.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-19mlxsw: core_env: Fix driver initialization with old firmwareIdo Schimmel
The driver queries the Management Capabilities Mask (MCAM) register during initialization to understand if it can read up to 128 bytes from transceiver modules. However, not all firmware versions support this register, leading to the driver failing to load. Fix by treating an error in the register query as an indication that the feature is not supported. Fixes: 1f4aea1f72da ("mlxsw: core_env: Read transceiver module EEPROM in 128 bytes chunks") Reported-by: Tim 'mithro' Ansell <me@mith.ro> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/0afa8b2e8bac178f5f88211344429176dcc72281.1713446092.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-19mlxsw: core: Unregister EMAD trap using FORWARD actionIdo Schimmel
The device's manual (PRM - Programmer's Reference Manual) classifies the trap that is used to deliver EMAD responses as an "event trap". Among other things, it means that the only actions that can be associated with the trap are TRAP and FORWARD (NOP). Currently, during driver de-initialization the driver unregisters the trap by setting its action to DISCARD, which violates the above guideline. Future firmware versions will prevent such misuses by returning an error. This does not prevent the driver from working, but an error will be printed to the kernel log during module removal / devlink reload: mlxsw_spectrum 0000:03:00.0: Reg cmd access status failed (status=7(bad parameter)) mlxsw_spectrum 0000:03:00.0: Reg cmd access failed (reg_id=7003(hpkt),type=write) Suppress the error message by aligning the driver to the manual and use a FORWARD (NOP) action when unregistering the trap. Fixes: 4ec14b7634b2 ("mlxsw: Add interface to access registers and process events") Cc: Jiri Pirko <jiri@resnulli.us> Cc: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/753a89e14008fde08cb4a2c1e5f537b81d8eb2d6.1713446092.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-19net: bcmasp: fix memory leak when bringing down interfaceJustin Chen
When bringing down the TX rings we flush the rings but forget to reclaimed the flushed packets. This leads to a memory leak since we do not free the dma mapped buffers. This also leads to tx control block corruption when bringing down the interface for power management. Fixes: 490cb412007d ("net: bcmasp: Add support for ASP2.0 Ethernet controller") Signed-off-by: Justin Chen <justin.chen@broadcom.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240418180541.2271719-1-justin.chen@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-19Merge tag 'for-linus-iommufd' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd Pull iommufd fixes from Jason Gunthorpe: "Two fixes for the selftests: - CONFIG_IOMMUFD_TEST needs CONFIG_IOMMUFD_DRIVER to work - The kconfig fragment sshould include fault injection so the fault injection test can work" * tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: iommufd: Add config needed for iommufd_fail_nth iommufd: Add missing IOMMUFD_DRIVER kconfig for the selftest
2024-04-19Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: - Add a missing mutex_destroy() in rxe - Enhance the debugging print for cm_destroy failures to help debug these - Fix mlx5 MAD processing in cases where multiport devices are running in switchedev mode * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/mlx5: Fix port number for counter query in multi-port configuration RDMA/cm: Print the old state when cm_destroy_id gets timeout RDMA/rxe: Fix the problem "mutex_destroy missing"
2024-04-19Merge tag 's390-6.9-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Alexander Gordeev: - Fix NULL pointer dereference in program check handler - Fake IRBs are important events relevant for problem analysis. Add traces when queueing and delivering - Fix a race condition in ccw_device_set_online() that can cause the online process to fail - Deferred condition code 1 response indicates that I/O was not started and should be retried. The current QDIO implementation handles a cc1 response as an error, resulting in a failed QDIO setup. Fix that by retrying the setup when a cc1 response is received * tag 's390-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: Fix NULL pointer dereference s390/cio: log fake IRB events s390/cio: fix race condition during online processing s390/qdio: handle deferred cc1
2024-04-19drm/i915: Enable per-lane DP drive settings for bxt/glkVille Syrjälä
Now the bxt/glk PHY code is ready for per-lane drive settings so enable it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412175818.29217-9-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-19drm/i915/dpio: Program bxt/glk PHY TX registers per-laneVille Syrjälä
Program each bxt/glk PHY TX lane with its own settings instead of blasting them all with the same stuff via group access. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412175818.29217-8-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-19drm/i915/dpio: s/ddi/dpio/ for bxt/glk PHY stuffVille Syrjälä
Since all of this lives in intel_dpio_phy.c let's rename the bxt/glk functions to have bxt_dpio_phy_ namespace. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412175818.29217-7-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-19drm/i915/dpio: Use intel_de_rmw() for BXT DPIO latency optim setupVille Syrjälä
Replace the hand rolled intel_de_rmw() with the real thing. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412175818.29217-6-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-19drm/i915/dpio: Introdude bxt_ddi_phy_rmw_grp()Ville Syrjälä
Add a helper to do the "read from one per-lane register and write to the group register" rmw cycle. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412175818.29217-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-19drm/i915/dpio: Extract bxt_dpio_phy_regs.hVille Syrjälä
Extract the BXT/GLK DPIO PHY register definitions into their own file. v2: Adjust gvt accordingly Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417151232.32175-1-ville.syrjala@linux.intel.com
2024-04-19drm/i915/dpio: Add per-lane PHY TX register definitons for bxt/glkVille Syrjälä
Add consistent definitions for the per-lane PHY TX registers on bxt/glk. The current situation is a slight mess with some registers having a LN0 define, while others have a parametrized per-lane definition. v2: Adjust gvt accordingly Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417151211.32135-1-ville.syrjala@linux.intel.com
2024-04-19drm/i915/dpio: Clean up bxt/glk PHY registersVille Syrjälä
Use REG_BIT() & co. for the bxt/glk PHY register definitons. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412175818.29217-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-19Merge tag 'thermal-6.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fix from Rafael Wysocki: "This prevents the thermal debug code from attempting to divide by zero and corrects trip point statistics (Rafael Wysocki)" * tag 'thermal-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/debugfs: Add missing count increment to thermal_debug_tz_trip_up()
2024-04-19Merge tag 'drm-fixes-2024-04-19' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Regular week of fixes, seems to be about right for this time in the release cycle, amdgpu, and nouveau are the main one with some scattered fixes otherwise. ttm: - Stop pooling cached NUMA pages amdgpu: - Fix invalid resource->start check - USB-C DSC fix - Fix a potential UAF in VA IOCTL - Fix visible VRAM handling during faults amdkfd: - Fix memory leak in create_process failure radeon: - Silence UBSAN warnings from variable sized arrays nouveau: - dp: Don't probe DP ports twice - nv04: Fix OOB access - nv50: Disable AUX bus for disconnected DP ports - nvkm: Fix instmem race condition panel: - Don't unregister DSI devices in several drivers v3d: - Fix enabled_ns increment xe: - Fix bo leak on error path during fb init - Fix use-after-free due to order vm is put and destroyed" * tag 'drm-fixes-2024-04-19' of https://gitlab.freedesktop.org/drm/kernel: drm/radeon: silence UBSAN warning (v3) drm/radeon: make -fstrict-flex-arrays=3 happy drm/amdgpu: fix visible VRAM handling during faults drm/amdgpu: validate the parameters of bo mapping operations more clearly Revert "drm/amd/display: fix USB-C flag update after enc10 feature init" drm/amdkfd: Fix memory leak in create_process failure drm/amdgpu: remove invalid resource->start check v2 drm/xe/vm: prevent UAF with asid based lookup drm/xe: Fix bo leak in intel_fb_bo_framebuffer_init drm/panel: novatek-nt36682e: don't unregister DSI device drm/panel: visionox-rm69299: don't unregister DSI device drm/nouveau/dp: Don't probe eDP ports twice harder drm/nouveau/kms/nv50-: Disable AUX bus for disconnected DP ports drm/v3d: Don't increment `enabled_ns` twice drm/vmwgfx: Sort primary plane formats by order of preference drm/vmwgfx: Fix crtc's atomic check conditional drm/vmwgfx: Fix prime import/export drm/ttm: stop pooling cached NUMA pages v2 drm: nv04: Fix out of bounds access nouveau: fix instmem race condition around ptr stores
2024-04-19drm/atomic-helper: fix parameter order in drm_format_conv_state_copy() callLucas Stach
Old and new state parameters are swapped, so the old state was cleared instead of the new duplicated state. Fixes: 903674588a48 ("drm/atomic-helper: Add format-conversion state to shadow-plane state") Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Leonard Göhrs <l.goehrs@pengutronix.de> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: <stable@vger.kernel.org> # v6.8+ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240404081756.2714424-1-l.stach@pengutronix.de
2024-04-19drm/i915/dg2: wait for HuC load completion before running selftestsDaniele Ceraolo Spurio
On DG2, submissions to VCS engines tied to a gem context are blocked until the HuC is loaded. Since some selftests do use a gem context, wait for the HuC load to complete before running the tests to avoid contamination. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10564 Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240410201505.894594-1-daniele.ceraolospurio@intel.com
2024-04-19drm/xe: Define all possible engines in media IP descriptorsMatt Roper
Rather than trying to identify exactly which engines are available on each platform in the IP descriptor, just include the list of all media engines that the IP could theoretically support (i.e., 8 VCS + 4 VECS). We still rely on the media fuse registers to tell us which specific engine instances are actually present on a given platform, so there shouldn't be any functional change. This will help prevent mistakes with engine numbering (for example ambiguity about whether the 2nd VCS engine on a platform with exactly two engines is numbered "VCS1" or "VCS2") and will also future-proof the code a bit more in case new SKUs or platform refreshes extend the engine list in the future. Note that the media fuse register technically has an 8-bit field for VECS engine presence starting on Xe2. However there's still no MMIO register range reserved for VE engines above VECS3, so VE0-VE3 is still consider the "maximum" VE engine mask that the driver can support for now. Bspec: 52614, 52615, 62567 Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417152621.3357990-2-matthew.d.roper@intel.com
2024-04-19drm/i915/dp_mst: Enable HBLANK expansion quirk for UHBR ratesImre Deak
Enabling the 5k@60Hz uncompressed mode on the MediaTek/Dell U3224KBA monitor results in a blank screen, at least on MTL platforms on UHBR link rates with some (<30) uncompressed bpp values. Enabling compression fixes the problem, so do that for now. Windows enables DSC always if the sink supports it and forcing it to enable the mode without compression leads to the same problem above (which suggests a panel issue with uncompressed mode). The same 5k mode on non-UHBR link rates is not affected and lower resolution modes are not affected either. The problem is similar to the one fixed by the HBLANK expansion quirk on Synaptics hubs, with the difference that the problematic mode has a longer HBLANK duration. Also the monitor doesn't report supporting HBLANK expansion; either its internal MST hub does the expansion internally - similarly to the Synaptics hub - or the issue has another root cause, but still related to the mode's short HBLANK duration. Enable the quirk for the monitor adjusting the detection for the above differences. v2: Rebase on drm_dp_128132b_supported() change. Cc: dri-devel@lists.freedesktop.org Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417142217.457902-1-imre.deak@intel.com
2024-04-19drm/i915/dp_mst: Make HBLANK expansion quirk work for logical portsImre Deak
The DPCD OUI of the logical port on a Dell UHBR monitor - on which the AUX device is used to enable DSC - is all 0. To detect if the HBLANK expansion quirk is required for this monitor use the OUI of the port's parent instead. Since in the above case the DPCD of both the logical port and the parent port reports being a sink device (vs. branch device) type, read the proper sink/branch OUI based on the DPCD device type. This is required by a follow-up patch enabling the quirk for the above Dell monitor. Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-11-imre.deak@intel.com
2024-04-19drm/dp_mst: Add drm_dp_mst_aux_for_parent()Imre Deak
Add a function to get the AUX device of the parent of an MST port, used by a follow-up i915 patch in the patchset. v2: Move drm_dp_mst_aux_for_parent() forward declaration to this patch (Ankit) Cc: Lyude Paul <lyude@redhat.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-10-imre.deak@intel.com
2024-04-19drm/dp_mst: Factor out drm_dp_mst_port_is_logical()Imre Deak
Factor out a function to check if an MST port is logical, used by a follow-up i915 patch in the patchset. v2: Move drm_dp_mst_aux_for_parent() forward declaration to the next patch. (Ankit) Cc: Lyude Paul <lyude@redhat.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-9-imre.deak@intel.com
2024-04-19drm/dp: Add drm_dp_128b132b_supported()Imre Deak
Factor out a function to check for 128b/132b channel coding support used by a follow-up patch in the patchset. v2: s/drm_dp_uhbr_channel_coding_supported()/drm_dp128b132b_supported() (Jani) Cc: dri-devel@lists.freedesktop.org Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Manasi Navare <navaremanasi@chromium.org> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417141936.457796-1-imre.deak@intel.com
2024-04-19drm/i915/dp_mst: Sanitize calculating the DSC DPT bpp limitImre Deak
Instead of checking each compressed bpp value against the maximum DSC/DPT bpp, simplify things by calculating the maximum bpp upfront and limiting the range of bpps looped over using this maximum. While at it add a comment about the origin of the DSC/DPT bpp limit. Bspec: 49259, 68912 Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-7-imre.deak@intel.com
2024-04-19drm/i915/dp_mst: Account with the DSC DPT bpp limit on MTLImre Deak
The DPT/DSC bpp limit should be accounted for on MTL platforms as well, do so. Bspec: 49259 Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-6-imre.deak@intel.com
2024-04-19drm/i915/dp_mst: Account for channel coding efficiency in the DSC DPT bpp limitImre Deak
The DSC DPT interface BW limit check should take into account the link clock's (aka DDI clock in bspec) channel coding efficiency overhead. Bspec suggests that the FEC overhead needs to be applied, however HW people claim this isn't the case, nor is any overhead applicable. However based on testing various 5k/6k modes both on the DELL U3224KBA monitor and the Unigraf UCD-500 CTS test device, both the channel coding efficiency (which includes the FEC overhead) and an additional 3% overhead must be accounted for to get these modes working. Bspec: 49259 v2: - Apply an additional 3% overhead, add a commit log and code comment about these overheads and the relation to the Bspec BW limit formula. Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-5-imre.deak@intel.com
2024-04-19Merge tag 'usb-serial-6.9-rc5' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial device ids for 6.9-rc5 Here are some new modem device ids for 6.9-rc5. All have been in linux-next with no reported issues. * tag 'usb-serial-6.9-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Telit FN920C04 rmnet compositions USB: serial: option: add Rolling RW101-GL and RW135-GL support USB: serial: option: add Lonsung U8300/U9300 product USB: serial: option: add support for Fibocom FM650/FG650 USB: serial: option: support Quectel EM060K sub-models USB: serial: option: add Fibocom FM135-GL variants
2024-04-19drm/i915/dp_mst: Fix BW limit check when calculating DSC DPT bppImre Deak
The DSC DPT bpp limit check should only fail if the available DPT BW is less than the required BW, fix the check accordingly. Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-4-imre.deak@intel.com
2024-04-19drm/i915/dp_mst: Fix symbol clock when calculating the DSC DPT bpp limitImre Deak
The expected link symbol clock unit when calculating the DSC DPT bpp limit is kSymbols/sec, aligning with the dotclock's kPixels/sec unit based on the crtc clock. As opposed to this port_clock is used - which has a 10 kbits/sec unit - with the resulting symbol clock in 10 kSymbols/sec units (disregarding the rounding error for the 13.5Gbps rate). Fix the calculation using the expected 10x factor. Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-3-imre.deak@intel.com
2024-04-19drm/i915/dp: Fix DSC line buffer depth programmingImre Deak
Fix the calculation of the DSC line buffer depth. This is limited both by the source's and sink's maximum line buffer depth, but the former one was not taken into account. On all Intel platform's the source's maximum buffer depth is 13, so the overall limit is simply the minimum of the source/sink's limit, regardless of the DSC version. This leaves the DSI DSC line buffer depth calculation as-is, trusting VBT. On DSC version 1.2 for sinks reporting a maximum line buffer depth of 16 the line buffer depth was incorrectly programmed as 0, leading to a corruption in color gradients / lines on the decompressed screen image. Cc: dri-devel@lists.freedesktop.org Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Manasi Navare <navaremanasi@chromium.org> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-2-imre.deak@intel.com
2024-04-19drm/i915/display: force qgv check after the hw state readoutVinod Govindapillai
The current intel_bw_atomic_check do not check the possbility of a sagv configuration change after the hw state readout. Hence cannot update the sagv configuration until some other relevant changes like data rates, number of planes etc. happen. Introduce a flag to force qgv check in such cases. Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-7-vinod.govindapillai@intel.com
2024-04-19drm/i915/display: handle systems with duplicate psf gv pointsStanislav Lisovskiy
There could be multiple qgv and psf gv points with similar values. Apparently pcode's handling of psf and qgv points are different. For qgv case, pcode sets whatever is asked by the driver. But in case of psf gv points, it compares the bw from points before setting the mask. This can cause problems in scenarios where we have to disable sagv by setting the highest bw point and there could be multiple points with highest bw. So to set the maximum psf gv point, find out all the points with the highest bw and set all together. v1: - use the same treatment to qgv points as well (Vinod) v2: - pcode confirms that for qgv points, it sets whatever the driver sets (Vinod) Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-6-vinod.govindapillai@intel.com
2024-04-19drm/i915/display: Disable SAGV on bw init, to force QGV point recalculationStanislav Lisovskiy
Problem is that on some platforms, we do get QGV point mask in wrong state on boot. However driver assumes it is set to 0 (i.e all points allowed), however in reality we might get them all restricted, causing issues. Lets disable SAGV initially to force proper QGV point state. If more QGV points are available, driver will recalculate and update those then after next commit. v2: - Added trace to see which QGV/PSF GV point is used when SAGV is disabled. v3: - Move force disable function to intel_bw_init in order to initialize bw state as well, so that hw/sw are immediately in sync after init. v4: - Don't try sending PCode request, seems like it is not possible at intel_bw_init, however assigning bw->state to be restricted as if SAGV is off, still forces driveer to send PCode request anyway on next modeset, so the solution still works. However we still need to address the case, when no display is connected, which anyway requires much more changes. v5: - Put PCode request back and apply temporary hack to make the request succeed(in case if there 2 PSF GV points with same BW, PCode accepts only if both points are restricted/unrestricted same time) - Fix argument sequence for adl_qgv_bw(Ville Syrjälä) v6: - Fix wrong platform checks, not to break everything else. v7: - Split the handling of quplicate QGV/PSF GV points (Vinod) Restrict force disable to display version below 14 (Vinod) v8: - Simplify icl_force_disable_sagv (Vinod) Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-5-vinod.govindapillai@intel.com
2024-04-19drm/i915/display: extract code to prepare qgv points maskVinod Govindapillai
Extract the code to prepare the QGV points mask as per the format expected by the pcode as this could be utlized from multiple points. Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-4-vinod.govindapillai@intel.com
2024-04-19drm/i915/display: Extract code required to calculate max qgv/psf gv pointStanislav Lisovskiy
We need that in order to force disable SAGV in next patch. Also it is beneficial to separate that code, as in majority cases, when SAGV is enabled, we don't even need those calculations. Also we probably need to determine max PSF GV point as well, however currently we don't do that when we disable SAGV, which might be actually causing some issues in that case. v2: - Introduce helper adl_qgv_bw(counterpart to adl_psf_bw) (Ville Syrjälä) - Don't restrict psf gv points for SAGV disable case (Ville Syrjälä) v3: - Update icl_max_bw_qgv_point_mask to return max qgv point mask (Vinod) v4: - Minor changes in icl_find_qgv_points (Vinod) v5: - use max_bw_point instead of max_bw_point_mask (stan) Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-3-vinod.govindapillai@intel.com
2024-04-19thermal/debugfs: Add missing count increment to thermal_debug_tz_trip_up()Rafael J. Wysocki
The count field in struct trip_stats, representing the number of times the zone temperature was above the trip point, needs to be incremented in thermal_debug_tz_trip_up(), for two reasons. First, if a trip point is crossed on the way up for the first time, thermal_debug_update_temp() called from update_temperature() does not see it because it has not been added to trips_crossed[] array in the thermal zone's struct tz_debugfs object yet. Therefore, when thermal_debug_tz_trip_up() is called after that, the trip point's count value is 0, and the attempt to divide by it during the average temperature computation leads to a divide error which causes the kernel to crash. Setting the count to 1 before the division by incrementing it fixes this problem. Second, if a trip point is crossed on the way up, but it has been crossed on the way up already before, its count value needs to be incremented to make a record of the fact that the zone temperature is above the trip now. Without doing that, if the mitigations applied after crossing the trip cause the zone temperature to drop below its threshold, the count will not be updated for this episode at all and the average temperature in the trip statistics record will be somewhat higher than it should be. Fixes: 7ef01f228c9f ("thermal/debugfs: Add thermal debugfs information for mitigation episodes") Cc :6.8+ <stable@vger.kernel.org> # 6.8+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-19drm/i915/display: Add meaningful traces for QGV point info error handlingStanislav Lisovskiy
For debug purposes we need those - error path won't flood the log, however there has been already numerous cases, when due to lack of debugs, we couldn't immediately tell what was the problem on customer machine, which slowed down the investigation, requiring to get access to target device and adding those traces manually. v2: - Make the debug more generic and move it to intel_dram_detect (Gustavo Sousa) v3: - Use %u for unsigned variable in debug prints (Gustavo) Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-2-vinod.govindapillai@intel.com
generated by cgit (git 2.34.1) at 2025-09-12 03:57:42 +0000