| Age | Commit message (Collapse) | Author |
|---|
|
The spreadsheet defines the PLL register block as having
the dwords in the following order:
block dwords offsets
PLL1 0x0-0x7 0x00-0x1f
PLL2 0x0-0x7 0x20-0x3f
PLL1ext 0x10-0x1f 0x40-0x5f
PLL2ext 0x10-0x1f 0x60-0x7f
So dword indexes 0x8-0xf don't even exist. Renumber
our register defines to match.
Note that the spreadsheet used hex numbering whereas our
defiens are in decimal. Perhaps we should change that?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
VLV_PLL_DW9_BCAST is actually VLV_PCS_DW17_BCAST. The address
does kinda look like it goes to the PLL block on a first glance,
but broadcast is special and doesn't even exist for the PLL
(only PCS and TX have it).
The fact that we use a broadcast write here is a bit sketchy
IMO since we're now blasting the register to all PCS splines
across the whole PHY. So the PCS registers in the other channel
(ie. other pipe/port) will also be written. But I guess the
fact that we always write the same value should make this a nop
even if the other channel is already enabled (assuming the VBIOS/GOP
didn't screw up and use some other value...).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Our VLV_REF_DW13 is actually VLV_REF_DW11. Rename it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
We don't use the result of the VLV_PCS01_DW8 read at all,
so don't read.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the PIPE_WGC_C22 register macro.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0a07f615c574040094b37c861078e41daf53c706.1714399071.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the PIPE_WGC_C21_C20 register macro.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/af39047d304f8a5c3c7a643f702f66c06ea5d638.1714399071.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the PIPE_WGC_C12 register macro.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/62a748b685f253151b17c101dec75351577f30c0.1714399071.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the PIPE_WGC_C11_C10 register macro.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3f7aae89cf63760bca43b54102c76b3ed2cf8735.1714399071.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the PIPE_WGC_C02 register macro.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/550d4e787445802236f0bf89e4d2f4f32cbd6d75.1714399071.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the PIPE_WGC_C01_C00 register macro.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/85b3db6e666a7a629b10b482b7e7043d52d30511.1714399071.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Avoid the implicit dev_priv local variable use, and pass dev_priv
explicitly to the PALETTE register macro.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bf07d29cefef23ebd5d54fbb0d3bf7e41d132d93.1714399071.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.10-2024-04-26:
amdgpu:
- Misc code cleanups and refactors
- Support setting reset method at runtime
- Report OD status
- SMU 14.0.1 fixes
- SDMA 4.4.2 fixes
- VPE fixes
- MES fixes
- Update BO eviction priorities
- UMSCH fixes
- Reset fixes
- Freesync fixes
- GFXIP 9.4.3 fixes
- SDMA 5.2 fixes
- MES UAF fix
- RAS updates
- Devcoredump updates for dumping IP state
- DSC fixes
- JPEG fix
- Fix VRAM memory accounting
- VCN 5.0 fixes
- MES fixes
- UMC 12.0 updates
- Modify contiguous flags handling
- Initial support for mapping kernel queues via MES
amdkfd:
- Fix rescheduling of restore worker
- VRAM accounting for SVM migrations
- mGPU fix
- Enable SQ watchpoint for gfx10
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426221245.1613332-1-alexander.deucher@amd.com
|
|
https://anongit.freedesktop.org/git/drm/drm-intel into drm-next
UAPI Changes:
- drm/i915/guc: Use context hints for GT frequency
Allow user to provide a low latency context hint. When set, KMD
sends a hint to GuC which results in special handling for this
context. SLPC will ramp the GT frequency aggressively every time
it switches to this context. The down freq threshold will also be
lower so GuC will ramp down the GT freq for this context more slowly.
We also disable waitboost for this context as that will interfere with
the strategy.
We need to enable the use of SLPC Compute strategy during init, but
it will apply only to contexts that set this bit during context
creation.
Userland can check whether this feature is supported using a new param-
I915_PARAM_HAS_CONTEXT_FREQ_HINT. This flag is true for all guc submission
enabled platforms as they use SLPC for frequency management.
The Mesa usage model for this flag is here -
https://gitlab.freedesktop.org/sushmave/mesa/-/commits/compute_hint
- drm/i915/gt: Enable only one CCS for compute workload
Enable only one CCS engine by default with all the compute sices
allocated to it.
While generating the list of UABI engines to be exposed to the
user, exclude any additional CCS engines beyond the first
instance
***
NOTE: This W/A will make all DG2 SKUs appear like single CCS SKUs by
default to mitigate a hardware bug. All the EUs will still remain
usable, and all the userspace drivers have been confirmed to be able
to dynamically detect the change in number of CCS engines and adjust.
For the smaller percent of applications that get perf benefit from
letting the userspace driver dispatch across all 4 CCS engines we will
be introducing a sysfs control as a later patch to choose 4 CCS each
with 25% EUs (or 50% if 2 CCS).
NOTE: A regression has been reported at
https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10895
However Andi has been triaging the issue and we're closing in a fix
to the gap in the W/A implementation:
https://lists.freedesktop.org/archives/intel-gfx/2024-April/348747.html
Driver Changes:
- Add new and fix to existing workarounds: Wa_14018575942 (MTL),
Wa_16019325821 (Gen12.70), Wa_14019159160 (MTL), Wa_16015675438,
Wa_14020495402 (Gen12.70) (Tejas, John, Lucas)
- Fix UAF on destroy against retire race and remove two earlier
partial fixes (Janusz)
- Limit the reserved VM space to only the platforms that need it (Andi)
- Reset queue_priority_hint on parking for execlist platforms (Chris)
- Fix gt reset with GuC submission is disabled (Nirmoy)
- Correct capture of EIR register on hang (John)
- Remove usage of the deprecated ida_simple_xx() API
- Refactor confusing __intel_gt_reset() (Nirmoy)
- Fix the fix for GuC reset lock confusion (John)
- Simplify/extend platform check for Wa_14018913170 (John)
- Replace dev_priv with i915 (Andi)
- Add and use gt_to_guc() wrapper (Andi)
- Remove bogus null check (Rodrigo, Dan)
. Selftest improvements (Janusz, Nirmoy, Daniele)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZitVBTvZmityDi7D@jlahtine-mobl.ger.corp.intel.com
|
|
Thomas needs the defio fixes, Maíra needs the vkms fixes and Joonas
has some fun with i915-gem conflicts.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Clean up i915_reg.h.
v2: Drop a redundant comment (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/679b7395a78c53006ac07448706f1809b74810de.1714128645.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Clean up i915_reg.h.
v2: Drop chicken regs and comments (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aa9b5d8adefbe97e1e37c9cfada3ab1581b0e8d5.1714128645.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
For some reason the paletter registers were missed when adding
intel_color_regs.h. Finish the job. Adjust some comments while at it.
v2: Fix comments (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1322f577b113b8fc1a6c2ef35340fc3c599b4bcb.1714128645.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
There are too few registers to warrant a dedicated file for LPE audio
regs, but the audio reg file is better than i915_reg.h.
v2: Rebase
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b5ee35309b2e0905aaa12d944b3d379c45a8a0bd.1714128645.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Fix a double free bug in the init error path of the GICv3 irqchip
driver"
* tag 'irq-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Prevent double free on error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Fix a race condition in the at24 eeprom handler, a NULL pointer
exception in the I2C core for controllers only using target modes,
drop a MAINTAINERS entry, and fix an incorrect DT binding for at24"
* tag 'i2c-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: smbus: fix NULL function pointer dereference
MAINTAINERS: Drop entry for PCA9541 bus master selector
eeprom: at24: fix memory corruption race condition
dt-bindings: eeprom: at24: Fix ST M24C64-D compatible schema
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- Single AMD driver fix for wake interrupt handling in clockstop mode
* tag 'soundwire-6.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: fix for wake interrupt handling for clockstop mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- Revert pl330 issue_pending waits until WFP state due to regression
reported in Bluetooth loading
- Xilinx driver fixes for synchronization, buffer offsets, locking and
kdoc
- idxd fixes for spinlock and preventing the migration of the perf
context to an invalid target
- idma driver fix for interrupt handling when powered off
- Tegra driver residual calculation fix
- Owl driver register access fix
* tag 'dmaengine-fix-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: idxd: Fix oops during rmmod on single-CPU platforms
dmaengine: xilinx: xdma: Clarify kdoc in XDMA driver
dmaengine: xilinx: xdma: Fix synchronization issue
dmaengine: xilinx: xdma: Fix wrong offsets in the buffers addresses in dma descriptor
dma: xilinx_dpdma: Fix locking
dmaengine: idxd: Convert spinlock to mutex to lock evl workqueue
idma64: Don't try to serve interrupts when device is powered off
dmaengine: tegra186: Fix residual calculation
dmaengine: owl: fix register access functions
dmaengine: Revert "dmaengine: pl330: issue_pending waits until WFP state"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- static checker (array size, bounds) fix for marvel driver
- Rockchip rk3588 pcie fixes for bifurcation and mux
- Qualcomm qmp-compbo fix for VCO, register base and regulator name for
m31 driver
- charger det crash fix for ti driver
* tag 'phy-fixes-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: ti: tusb1210: Resolve charger-det crash if charger psy is unregistered
phy: qcom: qmp-combo: fix VCO div offset on v5_5nm and v6
phy: phy-rockchip-samsung-hdptx: Select CONFIG_RATIONAL
phy: qcom: m31: match requested regulator name with dt schema
phy: qcom: qmp-combo: Fix register base for QSERDES_DP_PHY_MODE
phy: qcom: qmp-combo: Fix VCO div offset on v3
phy: rockchip: naneng-combphy: Fix mux on rk3588
phy: rockchip-snps-pcie3: fix clearing PHP_GRF_PCIESEL_CON bits
phy: rockchip-snps-pcie3: fix bifurcation on rk3588
phy: freescale: imx8m-pcie: fix pcie link-up instability
phy: marvell: a3700-comphy: Fix hardcoded array size
phy: marvell: a3700-comphy: Fix out of bounds read
|
|
Baruch reported an OOPS when using the designware controller as target
only. Target-only modes break the assumption of one transfer function
always being available. Fix this by always checking the pointer in
__i2c_transfer.
Reported-by: Baruch Siach <baruch@tkos.co.il>
Closes: https://lore.kernel.org/r/4269631780e5ba789cf1ae391eec1b959def7d99.1712761976.git.baruch@tkos.co.il
Fixes: 4b1acc43331d ("i2c: core changes for slave support")
[wsa: dropped the simplification in core-smbus to avoid theoretical regressions]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Baruch Siach <baruch@tkos.co.il>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a lot of minor DT fixes for Mediatek, Rockchip, Qualcomm and
Microchip and NXP, addressing both build-time warnings and bugs found
during runtime testing.
Most of these changes are machine specific fixups, but there are a few
notable regressions that affect an entire SoC:
- The Qualcomm MSI support that was improved for 6.9 ended up being
wrong on some chips and now gets fixed.
- The i.MX8MP camera interface broke due to a typo and gets updated
again.
The main driver fix is also for Qualcomm platforms, rewriting an
interface in the QSEECOM firmware support that could lead to crashing
the kernel from a trusted application.
The only other code changes are minor fixes for Mediatek SoC drivers"
* tag 'soc-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
ARM: dts: imx6ull-tarragon: fix USB over-current polarity
soc: mediatek: mtk-socinfo: depends on CONFIG_SOC_BUS
soc: mediatek: mtk-svs: Append "-thermal" to thermal zone names
arm64: dts: imx8mp: Fix assigned-clocks for second CSI2
ARM: dts: microchip: at91-sama7g54_curiosity: Replace regulator-suspend-voltage with the valid property
ARM: dts: microchip: at91-sama7g5ek: Replace regulator-suspend-voltage with the valid property
arm64: dts: rockchip: Fix USB interface compatible string on kobol-helios64
arm64: dts: qcom: sc8180x: Fix ss_phy_irq for secondary USB controller
arm64: dts: qcom: sm8650: Fix the msi-map entries
arm64: dts: qcom: sm8550: Fix the msi-map entries
arm64: dts: qcom: sm8450: Fix the msi-map entries
arm64: dts: qcom: sc8280xp: add missing PCIe minimum OPP
arm64: dts: qcom: x1e80100: Fix the compatible for cluster idle states
arm64: dts: qcom: Fix type of "wdog" IRQs for remoteprocs
arm64: dts: rockchip: regulator for sd needs to be always on for BPI-R2Pro
dt-bindings: rockchip: grf: Add missing type to 'pcie-phy' node
arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 2
arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 1
arm64: dts: rockchip: drop redundant pcie-reset-suspend in Scarlet Dumo
arm64: dts: rockchip: mark system power controller and fix typo on orangepi-5-plus
...
|
|
Add some missing HDCP registers to be used in DCN35.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update ADD_QUEUE interface for mes11 to support
mes mapping legacy queue.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Converting size from size_t to int may overflow.
v2: keep reverse xmas tree order (Christian)
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add mes mapping legacy queue framework support.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Clear warning that uses uninitialized value fw_size.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit address some small code style issues in DC.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit reorganizes the order in which some control registers are
presented to make it easier to identify the operations based on the
hardware doc.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit removes some unnecessary code and makes the required
adjustments to replace other parts of the code with a short option.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Do not dump the ip registers during driver reload
in passthrough environment.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Now we have two flags for contiguous VRAM buffer allocation.
If the application request for AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS,
it would set the ttm place TTM_PL_FLAG_CONTIGUOUS flag in the
buffer's placement function.
This patch will change the default behaviour of the two flags.
When we set AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS
- This means contiguous is not mandatory.
- we will try to allocate the contiguous buffer. Say if the
allocation fails, we fallback to allocate the individual pages.
When we setTTM_PL_FLAG_CONTIGUOUS
- This means contiguous allocation is mandatory.
- we are setting this in amdgpu_bo_pin_restricted() before bo validation
and check this flag in the vram manager file.
- if this is set, we should allocate the buffer pages contiguously.
the allocation fails, we return -ENOSPC.
v2:
- keep the mem_flags and bo->flags check as is(Christian)
- place the TTM_PL_FLAG_CONTIGUOUS flag setting into the
amdgpu_bo_pin_restricted function placement range iteration
loop(Christian)
- rename find_pages with amdgpu_vram_mgr_calculate_pages_per_block
(Christian)
- Keep the kernel BO allocation as is(Christain)
- If BO pin vram allocation failed, we need to return -ENOSPC as
RDMA cannot work with scattered VRAM pages(Philip)
v3(Christian):
- keep contiguous flag handling outside of pages_per_block
calculation
- remove the hacky implementation in contiguous flag error
handling code
v4(Christian):
- use any variable and return value for non-contiguous
fallback
v5: rebase to amd-staging-drm-next branch
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This fixes 29 UNINIT issues reported by Coverity.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This fixes 49 UNINIT issues reported by Coverity.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This fixes 11 UNINIT issues reported by Coverity.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This fixes 1 PW.INCLUDE_RECURSION reported by Coverity.
"./drivers/gpu/drm/amd/amdgpu/../display/dc/dc_types.h"
includes itself: dc_types.h -> dal_types.h -> dc_types.h
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
find_disp_cfg_idx_by_plane_id and find_disp_cfg_idx_by_stream_id returns
an array index and they return -1 when not found; however, -1 is not a
valid index number.
[HOW]
When this happens, call ASSERT(), and return a positive number (which is
fewer than callers' array size) instead.
This fixes 4 OVERRUN and 2 NEGATIVE_RETURNS issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
resource_stream_to_stream_idx returns an array index and it return -1
when not found; however, -1 is not a valid array index number.
[HOW]
When this happens, call ASSERT(), and return a zero instead.
This fixes an OVERRUN and an NEGATIVE_RETURNS issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
&mode_lib->mp.Watermark and &locals->Watermark are
the same address. memcpy may lead to unexpected behavior.
[HOW]
memmove should be used.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
ENGINE_ID_UNKNOWN = -1 and can not be used as an array index. Plus, it
also means it is uninitialized and does not need free audio.
[HOW]
Skip and return NULL.
This fixes 2 OVERRUN issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
pipe_ctx has a size of MAX_PIPES so checking its index before accessing
the array.
This fixes an OVERRUN issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are new control registers introduced in gfx10 used to configure
hardware watchpoints triggered by SMEM instructions:
SQ_WATCH{0,1,2,3}_{CNTL_ADDR_HI,ADDR_L}.
Those registers work in a similar way as the TCP_WATCH* registers
currently used for gfx9 and above.
This patch adds support to program the SQ_WATCH registers for gfx10.
The SQ_WATCH?_CNTL.MASK field has one bit more than
TCP_WATCH?_CNTL.MASK, so SQ watchpoints can have a finer granularity
than TCP_WATCH watchpoints. In this patch, we keep the capabilities
advertised to the debugger unchanged
(HSA_DBG_WATCH_ADDR_MASK_*_BIT_GFX10) as this reflects what both TCP and
SQ watchpoints can do and both watchpoints are configured together.
Signed-off-by: Lancelot SIX <lancelot.six@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
msg_id is used as an array index and it cannot be a negative value, and
therefore cannot be equal to MOD_HDCP_MESSAGE_ID_INVALID (-1).
[HOW]
Check whether msg_id is valid before reading and setting.
This fixes 4 OVERRUN issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
rlc_microcode()
The function gfx_v9_4_3_init_microcode in gfx_v9_4_3.c was generating
about potential truncation of output when using the snprintf function.
The issue was due to the size of the buffer 'ucode_prefix' being too
small to accommodate the maximum possible length of the string being
written into it.
The string being written is "amdgpu/%s_mec.bin" or "amdgpu/%s_rlc.bin",
where %s is replaced by the value of 'chip_name'. The length of this
string without the %s is 16 characters. The warning message indicated
that 'chip_name' could be up to 29 characters long, resulting in a total
of 45 characters, which exceeds the buffer size of 30 characters.
To resolve this issue, the size of the 'ucode_prefix' buffer has been
reduced from 30 to 15. This ensures that the maximum possible length of
the string being written into the buffer will not exceed its size, thus
preventing potential buffer overflow and truncation issues.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c: In function ‘gfx_v9_4_3_early_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:379:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
379 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name);
| ^~
......
439 | r = gfx_v9_4_3_init_rlc_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:379:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30
379 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:413:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
413 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name);
| ^~
......
443 | r = gfx_v9_4_3_init_cp_compute_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:413:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30
413 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 86301129698b ("drm/amdgpu: split gc v9_4_3 functionality from gc v9_0")
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Check return pointer of kzalloc before using it.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Theoretically rare corner case where ceil(Y) results in rounding up to
an integer. If this happens, the 1 should be carried over to the X
value.
CC: stable@vger.kernel.org
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix ras mode2 reset failure in ras aca mode.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
