| Age | Commit message (Collapse) | Author |
|---|
|
Sometimes current polling count is not sufficient.
This patch increases it to 100.
Signed-off-by: Shengzhen Li <szli@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
The pointer to the mmio register base is missing the __iomem
annotation. Fix this.
Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The (void *__iomem) cast is wrong. Change the target type of the
"base" pointer to void __iomem instead and drop the cast.
Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Casting a pointer to unsigned long only to immediately cast it back
to a pointer makes no sense. Fix this.
Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The sata_dwc_qc_prep() does nothing. Use the default ata_noop_qc_prep
instead.
Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Here we refactor HOSTDEV{P}_FROM_*() macros to fit one line and fix the
definition of HSDEV_FROM_HSDEVP() where wrong name of the parameter waas used.
Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This moves all global data into the driver private struct, thus
permitting multiple devices of this type to be used.
The core_scr_read/write() functions are replaced with equivalent
calls to the existing sata_dwc_scr_read/write().
Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This adds support for powering on an optional PHY when activating the
device.
Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Currently this driver only works with a DesignWare DMA engine which it
registers manually using the second "reg" address range and interrupt
number from the DT node.
This patch makes the driver instead use the "dmas" property if present,
otherwise optionally falling back on the old way so existing device
trees can continue to work.
With this change, there is no longer any reason to depend on the 460EX
machine type so drop that from Kconfig.
Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
ata_sff_qc_issue() can't handle DMA commands and thus we have to avoid it for
them. Do call ata_bmdma_qc_issue() instead for this case. Note that the former
one distinguishes PIO and DMA mode and behaves accordingly.
Suggested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Calling dmaengine_prep_slave_sg() for non-dma ATA commands is
unnecessary at best and could be harmful if the dma driver reacts
badly to this. It also causes this driver to print a bogus error
message in these cases.
This patch changes sata_dwc_qc_issue() to only do the dma setup
for dma commands and also reports an error to libata if if fails.
Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
There is no need to have a platform driver compiled since the DMA driver is
used as a library.
Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
In the original code the DMA is always a flow controller. Set this accordingly
in updated code.
Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The burst size as defined by DMAengine API is in items of address width. Derive
burst size from AHB_DMA_BRST_DFLT (64 bytes) by dividing it to
DMA_SLAVE_BUSWIDTH_4_BYTES (4 bytes) that gives us 16 items.
Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The original code states:
Make sure a LLI block is not created that will span 8K max FIS
boundary. If the block spans such a FIS boundary, there is a chance
that a DMA burst will cross that boundary -- this results in an error
in the host controller.
Since we have switched to generic DMAengine API we satisfy above by setting
dma_boundary value to 0x1fff.
Suggested-by: Mans Rullgard <mans@mansr.com>
Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This patch fixes Machine Check "Data Write PLB Error" which happens
when libata-sff's ata_sff_dev_select is trying to write into the
device_addr in order to select a drive. However, SATA has no master
or slave devices like the old ATA Bus, therefore selecting a
different drive is kind of pointless.
Data Write PLB Error
Oops: Machine check, sig: 7 [#1]
PowerPC 44x Platform
Modules linked in:
CPU: 0 PID: 508 Comm: scsi_eh_0 Not tainted 4.6.0-rc3-next-20160412+ #10
[...]
NIP [c027e820] ata_sff_dev_select+0x3c/0x44
LR [c027e810] ata_sff_dev_select+0x2c/0x44
Call Trace:
[cec31cd0] [c027da00] ata_sff_postreset+0x40/0xb4 (unreliable)
[cec31ce0] [c027a03c] ata_eh_reset+0x5cc/0x928
[cec31d60] [c027a840] ata_eh_recover+0x330/0x10bc
[cec31df0] [c027bae0] ata_do_eh+0x4c/0xa4
[...]
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This lock is already taken in ata_scsi_queuecmd() a few levels up the
call stack so attempting to take it here is an error. Moreover, it is
pointless in the first place since it only protects a single, atomic
assignment.
Enabling lock debugging gives the following output:
=============================================
[ INFO: possible recursive locking detected ]
4.4.0-rc5+ #189 Not tainted
---------------------------------------------
kworker/u2:3/37 is trying to acquire lock:
(&(&host->lock)->rlock){-.-...}, at: [<90283294>] sata_dwc_exec_command_by_tag.constprop.14+0x44/0x8c
but task is already holding lock:
(&(&host->lock)->rlock){-.-...}, at: [<902761ac>] ata_scsi_queuecmd+0x2c/0x330
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&host->lock)->rlock);
lock(&(&host->lock)->rlock);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by kworker/u2:3/37:
#0: ("events_unbound"){.+.+.+}, at: [<9003a0a4>] process_one_work+0x12c/0x430
#1: ((&entry->work)){+.+.+.}, at: [<9003a0a4>] process_one_work+0x12c/0x430
#2: (&bdev->bd_mutex){+.+.+.}, at: [<9011fd54>] __blkdev_get+0x50/0x380
#3: (&(&host->lock)->rlock){-.-...}, at: [<902761ac>] ata_scsi_queuecmd+0x2c/0x330
stack backtrace:
CPU: 0 PID: 37 Comm: kworker/u2:3 Not tainted 4.4.0-rc5+ #189
Workqueue: events_unbound async_run_entry_fn
Stack : 90b38e30 00000021 00000003 9b2a6040 00000000 9005f3f0 904fc8dc 00000025
906b96e4 00000000 90528648 9b3336c4 904fc8dc 9009bf18 00000002 00000004
00000000 00000000 9b3336c4 9b3336e4 904fc8dc 9003d074 00000000 90500000
9005e738 00000000 00000000 00000000 00000000 00000000 00000000 00000000
6e657665 755f7374 756f626e 0000646e 00000000 00000000 9b00ca00 9b025000
...
Call Trace:
[<90009d6c>] show_stack+0x88/0xa4
[<90057744>] __lock_acquire+0x1ce8/0x2154
[<900583e4>] lock_acquire+0x64/0x8c
[<9045ff10>] _raw_spin_lock_irqsave+0x54/0x78
[<90283294>] sata_dwc_exec_command_by_tag.constprop.14+0x44/0x8c
[<90283484>] sata_dwc_qc_issue+0x1a8/0x24c
[<9026b39c>] ata_qc_issue+0x1f0/0x410
[<90273c6c>] ata_scsi_translate+0xb4/0x200
[<90276234>] ata_scsi_queuecmd+0xb4/0x330
[<9025800c>] scsi_dispatch_cmd+0xd0/0x128
[<90259934>] scsi_request_fn+0x58c/0x638
[<901a3e50>] __blk_run_queue+0x40/0x5c
[<901a83d4>] blk_queue_bio+0x27c/0x28c
[<901a5914>] generic_make_request+0xf0/0x188
[<901a5a54>] submit_bio+0xa8/0x194
[<9011adcc>] submit_bh_wbc.isra.23+0x15c/0x17c
[<9011c908>] block_read_full_page+0x3e4/0x428
[<9009e2e0>] do_read_cache_page+0xac/0x210
[<9009fd90>] read_cache_page+0x18/0x24
[<901bbd18>] read_dev_sector+0x38/0xb0
[<901bd174>] msdos_partition+0xb4/0x5c0
[<901bcb8c>] check_partition+0x140/0x274
[<901bba60>] rescan_partitions+0xa0/0x2b0
[<9011ff68>] __blkdev_get+0x264/0x380
[<901201ac>] blkdev_get+0x128/0x36c
[<901b9378>] add_disk+0x3c0/0x4bc
[<90268268>] sd_probe_async+0x100/0x224
[<90043a44>] async_run_entry_fn+0x50/0x124
[<9003a11c>] process_one_work+0x1a4/0x430
[<9003a4f4>] worker_thread+0x14c/0x4fc
[<900408f4>] kthread+0xd0/0xe8
[<90004338>] ret_from_kernel_thread+0x14/0x1c
Fixes: 62936009f35a ("[libata] Add 460EX on-chip SATA driver, sata_dwc_460ex")
Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This is an initial implementation of a netdev driver for GTP datapath
(GTP-U) v0 and v1, according to the GSM TS 09.60 and 3GPP TS 29.060
standards. This tunneling protocol is used to prevent subscribers from
accessing mobile carrier core network infrastructure.
This implementation requires a GGSN userspace daemon that implements the
signaling protocol (GTP-C), such as OpenGGSN [1]. This userspace daemon
updates the PDP context database that represents active subscriber
sessions through a genetlink interface.
For more context on this tunneling protocol, you can check the slides
that were presented during the NetDev 1.1 [2].
Only IPv4 is supported at this time.
[1] http://git.osmocom.org/openggsn/
[2] http://www.netdevconf.org/1.1/proceedings/slides/schultz-welte-osmocom-gtp.pdf
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new 8265 series SDIO ID.
Signed-off-by: Mordechai Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Support sending P2P device frames should be sent from
queue #2, as required in DQA mode.
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
In DQA mode, allocate a dedicated queue (#9) for P2P GO/soft
AP probe responses.
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
It seems trigger cannot be configured too early, otherwise it does not work in
case of panel. The patch fixes also trigger flag logic, previously HW-TRIGGER
flag was cleared in case of panel - as a result panel used always software
trigger.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This allows to remove the local of_graph_get_port_by_reg(),
of_graph_get_endpoint_by_reg(), and of_get_child_by_name_reg()
functions.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Inki Dae <inki.dae@samsung.com>
|
|
This allows to remove the local of_graph_get_port_by_reg(),
of_graph_get_endpoint_by_reg(), of_get_child_by_name_reg(),
and of_graph_get_remote_port_parent() functions.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
It's an optional hook. Might be needed for frontbuffer rendering on
manual upload displays, but a simple TODO doesn't explain at all what
needs to be done or why.
Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
There is no reason to be wapper functions to use DMA mapping APIs. Use
directly DMA mapping APIs and remove the wapper functions.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The regulators may not be available just because their driver's probe
function was just not executed and so the regulators not registered.
So, in this case the Exynos HDMI driver should not print logs since
a -EPROBE_DEFER is not really an error and that will just pollute
the kernel log and confuse users.
This patch prevents the following misleading messages to be printed:
[ 1.443638] [drm:hdmi_probe] *ERROR* failed to get regulators
[ 1.449326] [drm:hdmi_probe] *ERROR* hdmi_resources_init failed
Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The imported dma-buf should be mapped by sub-system exporting it.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This allows exported dma-bufs to be mapped using gem_prime_mmap.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Don't use the vrefresh field of the DRM mode since this
one is supposed to only be used for debug purpose.
Instead use the clock field which should also provide
much more precise information.
Also sanitize the case in which the clock value
should be zero. We then just default to the maximum
clock divisor.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Driver code did not remove event from the list of pending events before destroy.
As a result drm core later tried to inspect invalid memory location.
The patch replaces removal code with call to core helper.
The bug was detected using KASAN:
[ 10.107249] ==================================================================
[ 10.107518] BUG: KASAN: use-after-free in drm_release+0xe9c/0x1000 at addr ffffffc089154a18
[ 10.107784] Read of size 8 by task modetest/103
[ 10.107931] =============================================================================
[ 10.113191] BUG kmalloc-128 (Not tainted): kasan: bad access detected
[ 10.119608] -----------------------------------------------------------------------------
[ 10.119608]
[ 10.129243] Disabling lock debugging due to kernel taint
[ 10.134551] INFO: Allocated in drm_mode_page_flip_ioctl+0x500/0xa98 age=4 cpu=0 pid=103
[ 10.142532] alloc_debug_processing+0x18c/0x198
[ 10.147043] ___slab_alloc.constprop.28+0x360/0x380
[ 10.151906] __slab_alloc.isra.25.constprop.27+0x54/0xa0
[ 10.157197] kmem_cache_alloc_trace+0x370/0x3b0
[ 10.161709] drm_mode_page_flip_ioctl+0x500/0xa98
[ 10.166400] drm_ioctl+0x4c4/0xb68
[ 10.169787] do_vfs_ioctl+0x16c/0xeb8
[ 10.173429] SyS_ioctl+0x8c/0xa0
[ 10.176642] el0_svc_naked+0x24/0x28
[ 10.180204] INFO: Freed in exynos_drm_crtc_cancel_page_flip+0xe0/0x160 age=0 cpu=0 pid=103
[ 10.188447] free_debug_processing+0x174/0x388
[ 10.192871] __slab_free+0x2e8/0x438
[ 10.196431] kfree+0x350/0x360
[ 10.199469] exynos_drm_crtc_cancel_page_flip+0xe0/0x160
[ 10.204762] exynos_drm_preclose+0x58/0xa0
[ 10.208844] drm_release+0x1f0/0x1000
[ 10.212491] __fput+0x1c4/0x5b8
[ 10.215613] ____fput+0xc/0x18
[ 10.218654] task_work_run+0x130/0x198
[ 10.222385] do_exit+0x700/0x2278
[ 10.225681] do_group_exit+0xe4/0x2c8
[ 10.229327] SyS_exit_group+0x1c/0x20
[ 10.232973] el0_svc_naked+0x24/0x28
[ 10.236532] INFO: Slab 0xffffffbdc2a45500 objects=32 used=10 fp=0xffffffc089154a00 flags=0x4080
[ 10.245210] INFO: Object 0xffffffc089154a00 @offset=2560 fp=0xffffffc089157600
[ 10.245210]
...
[ 10.384532] CPU: 0 PID: 103 Comm: modetest Tainted: G B 4.5.0-rc3-00748-gd5e2881 #271
[ 10.398325] Call trace:
[ 10.400764] [<ffffffc000091428>] dump_backtrace+0x0/0x328
[ 10.406141] [<ffffffc000091764>] show_stack+0x14/0x20
[ 10.411176] [<ffffffc00089c550>] dump_stack+0xb0/0xe8
[ 10.416210] [<ffffffc000395778>] print_trailer+0xf8/0x160
[ 10.421592] [<ffffffc00039b5cc>] object_err+0x3c/0x50
[ 10.426626] [<ffffffc00039d630>] kasan_report_error+0x248/0x550
[ 10.432527] [<ffffffc00039da50>] __asan_report_load8_noabort+0x40/0x48
[ 10.439039] [<ffffffc000b5b724>] drm_release+0xe9c/0x1000
[ 10.444419] [<ffffffc0003d340c>] __fput+0x1c4/0x5b8
[ 10.449280] [<ffffffc0003d3884>] ____fput+0xc/0x18
[ 10.454055] [<ffffffc000101aa8>] task_work_run+0x130/0x198
[ 10.459522] [<ffffffc0000bc058>] do_exit+0x700/0x2278
[ 10.464557] [<ffffffc0000bdcfc>] do_group_exit+0xe4/0x2c8
[ 10.469939] [<ffffffc0000bdefc>] SyS_exit_group+0x1c/0x20
[ 10.475320] [<ffffffc000087530>] el0_svc_naked+0x24/0x28
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Software trigger should not be used if hardware trigger is configured.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
vblank should be signaled to userspace after reading framebuffers not before,
signaling it in TE interrupt looks wrong. TE triggers reading framebuffers
so it is the worst moment. Tearing is not observable because hardware prevents
it, but there are frequently skipped vblank events.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
HDMI-PHY clock should be accessible from other components in the pipeline.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Make it possible to name the producer side of a GPIO line using
a "gpio-line-names" property array, modeled on the
"clock-output-names" property from the clock bindings.
This naming is especially useful for:
- Debugging: lines are named after function, not just opaque
offset numbers.
- Exploration: systems where some or all GPIO lines are available
to end users, such as prototyping, one-off's "makerspace usecases"
users are helped by the names of the GPIO lines when tinkering.
This usecase has been surfacing recently.
The gpio-line-names attribute is completely optional.
Example output from lsgpio on a patched Snowball tree:
GPIO chip: gpiochip6, "8000e180.gpio", 32 GPIO lines
line 0: unnamed unused
line 1: "AP_GPIO161" "extkb3" [kernel]
line 2: "AP_GPIO162" "extkb4" [kernel]
line 3: "ACCELEROMETER_INT1_RDY" unused [kernel]
line 4: "ACCELEROMETER_INT2" unused
line 5: "MAG_DRDY" unused [kernel]
line 6: "GYRO_DRDY" unused [kernel]
line 7: "RSTn_MLC" unused
line 8: "RSTn_SLC" unused
line 9: "GYRO_INT" unused
line 10: "UART_WAKE" unused
line 11: "GBF_RESET" unused
line 12: unnamed unused
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Amit Kucheria <amit.kucheria@linaro.org>
Cc: David Mandala <david.mandala@linaro.org>
Cc: Lee Campbell <leecam@google.com>
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Michael Welling <mwelling@ieee.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
copy_oldmem_user() and ap_jumptable are private to the files they are
being used in. Therefore make them static.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The disconnect and later reconnect of a 3270 terminal does not do
a tty hangup. The current session is resumed which is a security
issue.
Do a tty hangup after a unit check has been received.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
If an existing 3270 terminal disconnects and reconnects with a
different size, the 3270 driver still works with the old size.
If the new dimensions are larger the output merely looks funny,
if the new dimensions are smaller the terminal is unusable.
To fix this restart the size detection after a unit check has
been received.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The header file asm/sizes.h is unnecessary.
And it can also be compiled under X86 arch after the removal.
Signed-off-by: Wang Hongcheng <annie.wang@amd.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Make sure bit 4 is set for the charge pump setting. It is required according
to SSD1306 App Note.
Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
caam_jr_alloc() used to return NULL if a JR device could not be
allocated for a session. In turn, every user of this function used
IS_ERR() function to verify if anything went wrong, which does NOT look
for NULL values. This made the kernel crash if the sanity check failed,
because the driver continued to think it had allocated a valid JR dev
instance to the session and at some point it tries to do a caam_jr_free()
on a NULL JR dev pointer.
This patch is a fix for this issue.
Cc: <stable@vger.kernel.org>
Signed-off-by: Catalin Vasile <cata.vasile@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
It gives significant improvements ( ~+15%) on some modes.
These code has been adopted from OpenSSL project in collaboration
with the original author (Andy Polyakov <appro@openssl.org>).
Signed-off-by: Paulo Flabiano Smorigo <pfsmorigo@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
fbmem_init() ignores all errors, while fbmem_exit() does not
check if deallocating resources are valid.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
* fix P2P rates (and possibly other issues)
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Remove the sh_mipi_dsi driver as it appears to be unused since
c0bb9b302769 ("ARCH: ARM: shmobile: Remove ag5evm board support").
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
clk_prepare_enable can fail and if it does the controller must not be
considered enabled. So check for errors, properly unwind and give the
error code back to the caller.
While touching the clock code also enable the clocks in the same
direction and disable in reverse order.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
.set_power gets passed an FB_BLANK_XXX value, not a bool. So 0 signals
on; and >1 means off. The same applies for return values of .get_power.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
mmc_select_hs200() and mmc_select_hs() will keep the timing
as before if switch fails. So it's meaningless to print the
failed switched mode outside based on the current host timing.
Furthermore, the original print is wrong, it should be:
pr_warn("%s: switch to %s failed\n",
mmc_hostname(card->host),
mmc_card_hs(card) ? "high-speed" :
(mmc_card_hs200(card) ? "hs200" : ""));
Since we already have error message in mmc_select_hs200(),
simply remove it outside.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Currently MMC core will keep going if HS200/HS timing switch failed
with -EBADMSG error by the assumption that the old timing is still valid.
However, for mmc_select_hs200 case, the signal voltage may have already
been switched. If the timing switch failed, we should fall back to
the old voltage in case the card is continue run with legacy timing.
If fall back signal voltage failed, we explicitly report an EIO error
to force retry during the next power cycle.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
