summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-12-06drm/plane-helper: Move drm_plane_helper_atomic_check() into udlThomas Zimmermann
The udl driver is the only caller of drm_plane_helper_atomic_check(). Move the function into the driver. No functional changes. v2: * fix documenation (Sui) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20231204090852.1650-2-tzimmermann@suse.de
2023-12-06drm: Remove Kconfig option for legacy support (CONFIG_DRM_LEGACY)Thomas Zimmermann
Remove CONFIG_DRM_LEGACY from Kconfig. Nothing depends on the option. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: David Airlie <airlied@gmail.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-15-tzimmermann@suse.de
2023-12-06char/agp: Remove frontend codeThomas Zimmermann
The AGP subsystem supports a user-space interface via /dev/agpgart. It is only enabled with DRM support for mode setting in user space. (i.e., CONFIG_DRM_LEGACY). All of that DRM code has been removed and the option will go away. Hence remove the AGP frontend. Modern DRM drivers with kernel mode setting handle AGP support internally. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: David Airlie <airlied@gmail.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-14-tzimmermann@suse.de
2023-12-06drm: Remove source code for non-KMS driversThomas Zimmermann
Remove all remaining source code for non-KMS drivers. These drivers have been removed in v6.3 and won't comeback. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: David Airlie <airlied@gmail.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-13-tzimmermann@suse.de
2023-12-06drm: Remove locking for legacy ioctls and DRM_UNLOCKEDThomas Zimmermann
Modern DRM drivers acquire ioctl locks by themselves. Legacy ioctls for user-space mode setting used to acquire drm_global_mutex. After removing the ioctl entry points, also remove the locking code. The only legacy ioctl without global locking was VBLANK_WAIT, which has been removed as well. Hence remove the related DRM_UNLOCKED flag. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: David Airlie <airlied@gmail.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-12-tzimmermann@suse.de
2023-12-06drm: Remove support for legacy driversThomas Zimmermann
Remove all hooks and calls into code for user-space mode setting from the DRM core. Without the drivers and ioctl entry points, none of this is required any longer. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: David Airlie <airlied@gmail.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-11-tzimmermann@suse.de
2023-12-06drm: Remove the legacy DRM_IOCTL_MODESET_CTL ioctlThomas Zimmermann
DRM drivers with user-space mode setting have been removed in Linux v6.3. [1] Now remove the ioctl entry points for these drivers. Invoking any of the ioctl ops will unconditionally return -EINVAL to user space. Invoking DRM_IOCTL_MODESET_CTL is different from the other legacy ioctl ops as it returns 0 even without CONFIG_DRM_LEGACY set. From the original commit 29935554b384 ("drm: Disallow DRM_IOCTL_MODESET_CTL for KMS drivers") it is not apparent how or why the operation differs from the others. It is likely just an oversight in commit 61ae227032e7 ("drm: allow removal of legacy codepaths (v4.1)"), which allowed disabling leagacy ioctls in the first place. Still keep this removal separate from the other ioctls to allow an easy revert, if necessary. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/series/111602/ # [1] Reviewed-by: David Airlie <airlied@gmail.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-10-tzimmermann@suse.de
2023-12-06drm: Remove entry points for legacy ioctlsThomas Zimmermann
DRM drivers with user-space mode setting have been removed in Linux v6.3. [1] Now remove the ioctl entry points for these drivers. Invoking any of the ioctl ops will unconditionally return -EINVAL to user space. This has already been the behavior for kernels without CONFIG_DRM_LEGACY set. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/series/111602/ # [1] Reviewed-by: David Airlie <airlied@gmail.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-9-tzimmermann@suse.de
2023-12-06drm/radeon: Do not include <drm/drm_legacy.h>Thomas Zimmermann
Including <drm/drm_legacy.h> is not required by radeon. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: amd-gfx@lists.freedesktop.org Reviewed-by: David Airlie <airlied@gmail.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-8-tzimmermann@suse.de
2023-12-06drm: Include <drm/drm_device.h>Thomas Zimmermann
Include <drm/drm_device.h> in drm_ioc32.c. Resolves a depenency on <drm/drm_legacy.h>, which will be removed. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: David Airlie <airlied@gmail.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-7-tzimmermann@suse.de
2023-12-06accel: Include <drm/drm_auth.h>Thomas Zimmermann
One of the source files includes <drm/drm_auth.h> via <drm/drm_legacy.h>, which will be removed. Include drm_auth.h directly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: David Airlie <airlied@gmail.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-6-tzimmermann@suse.de
2023-12-06drm/i915: Include <drm/drm_auth.h>Thomas Zimmermann
One of the source files includes <drm/drm_auth.h> via <drm/drm_legacy.h>, which will be removed. Include drm_auth.h directly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Reviewed-by: David Airlie <airlied@gmail.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-5-tzimmermann@suse.de
2023-12-06drm: Include <drm/drm_auth.h>Thomas Zimmermann
One of the source files includes <drm/drm_auth.h> via <drm/drm_legacy.h>, which will be removed. Include drm_auth.h directly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: David Airlie <airlied@gmail.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-4-tzimmermann@suse.de
2023-12-05ionic: Fix dim work handling in split interrupt modeBrett Creeley
Currently ionic_dim_work() is incorrect when in split interrupt mode. This is because the interrupt rate is only being changed for the Rx side even for dim running on Tx. Fix this by using the qcq from the container_of macro. Also, introduce some local variables for a bit of cleanup. Fixes: a6ff85e0a2d9 ("ionic: remove intr coalesce update from napi") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231204192234.21017-3-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-05ionic: fix snprintf format length warningShannon Nelson
Our friendly kernel test robot has reminded us that with a new check we have a warning about a potential string truncation. In this case it really doesn't hurt anything, but it is worth addressing especially since there really is no reason to reserve so many bytes for our queue names. It seems that cutting the queue name buffer length in half stops the complaint. Fixes: c06107cabea3 ("ionic: more ionic name tweaks") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311300201.lO8v7mKU-lkp@intel.com/ Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231204192234.21017-2-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-05net: bnxt: fix a potential use-after-free in bnxt_init_tcDinghao Liu
When flow_indr_dev_register() fails, bnxt_init_tc will free bp->tc_info through kfree(). However, the caller function bnxt_init_one() will ignore this failure and call bnxt_shutdown_tc() on failure of bnxt_dl_register(), where a use-after-free happens. Fix this issue by setting bp->tc_info to NULL after kfree(). Fixes: 627c89d00fb9 ("bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacks") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Link: https://lore.kernel.org/r/20231204024004.8245-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-05net: veth: fix packet segmentation in veth_convert_skb_to_xdp_buffLorenzo Bianconi
Based on the previous allocated packet, page_offset can be not null in veth_convert_skb_to_xdp_buff routine. Take into account page fragment offset during the skb paged area copy in veth_convert_skb_to_xdp_buff(). Fixes: 2d0de67da51a ("net: veth: use newly added page pool API for veth with xdp") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Link: https://lore.kernel.org/r/eddfe549e7e626870071930964ac3c38a1dc8068.1701702000.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-06Merge tag 'coresight-fixes-for-v6.7-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next Suzuki writes: coresight: Fixes for v6.7-rc1 Here are a few fixes for the hwtracing subsystem targetting v6.7. Includes: - Ultrasoc-SMB driver fixes - HiSilicon PTT driver fixes - Corsight driver fixes Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> * tag 'coresight-fixes-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: coresight: ultrasoc-smb: Fix uninitialized before use buf_hw_base coresight: ultrasoc-smb: Config SMB buffer before register sink coresight: ultrasoc-smb: Fix sleep while close preempt in enable_smb Documentation: coresight: fix `make refcheckdocs` warning hwtracing: hisi_ptt: Don't try to attach a task hwtracing: hisi_ptt: Handle the interrupt in hardirq context hwtracing: hisi_ptt: Add dummy callback pmu::read() coresight: Fix crash when Perf and sysfs modes are used concurrently coresight: etm4x: Remove bogous __exit annotation for some functions
2023-12-05scsi: be2iscsi: Fix a memleak in beiscsi_init_wrb_handle()Dinghao Liu
When an error occurs in the for loop of beiscsi_init_wrb_handle(), we should free phwi_ctxt->be_wrbq before returning an error code to prevent potential memleak. Fixes: a7909b396ba7 ("[SCSI] be2iscsi: Fix dynamic CID allocation Mechanism in driver") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20231123081941.24854-1-dinghao.liu@zju.edu.cn Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05powercap: DTPM: Fix missing cpufreq_cpu_put() callsLukasz Luba
The policy returned by cpufreq_cpu_get() has to be released with the help of cpufreq_cpu_put() to balance its kobject reference counter properly. Add the missing calls to cpufreq_cpu_put() in the code. Fixes: 0aea2e4ec2a2 ("powercap/dtpm_cpu: Reset per_cpu variable in the release function") Fixes: 0e8f68d7f048 ("powercap/drivers/dtpm: Add CPU energy model based support") Cc: v5.16+ <stable@vger.kernel.org> # v5.16+ Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-12-06Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1"Mathias Nyman
This reverts commit 4baf1218150985ee3ab0a27220456a1f027ea0ac. Enabling runtime pm as default for all AMD xHC 1.1 controllers caused regression. An initial attempt to fix those was done in commit a5d6264b638e ("xhci: Enable RPM on controllers that support low-power states") but new issues are still seen. Revert this to get those AMD xHC 1.1 systems working This patch went to stable an needs to be reverted from there as well. Fixes: 4baf12181509 ("xhci: Loosen RPM as default policy to cover for AMD xHC 1.1") Link: https://lore.kernel.org/linux-usb/55c50bf5-bffb-454e-906e-4408c591cb63@molgen.mpg.de Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20231205090548.1377667-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-05iavf: validate tx_coalesce_usecs even if rx_coalesce_usecs is zeroJacob Keller
In __iavf_set_coalesce, the driver checks both ec->rx_coalesce_usecs and ec->tx_coalesce_usecs for validity. It does this via a chain if if/else-if blocks. If every single branch of the series of if statements exited, this would be fine. However, the rx_coalesce_usecs is checked against zero to print an informative message if use_adaptive_rx_coalesce is enabled. If this check is true, it short circuits the entire chain of statements, preventing validation of the tx_coalesce_usecs field. Indeed, since commit e792779e6b63 ("iavf: Prevent changing static ITR values if adaptive moderation is on") the iavf driver actually rejects any change to the tx_coalesce_usecs or rx_coalesce_usecs when use_adaptive_tx_coalesce or use_adaptive_rx_coalesce is enabled, making this checking a bit redundant. Fix this error by removing the unnecessary and redundant checks for use_adaptive_rx_coalesce and use_adaptive_tx_coalesce. Since zero is a valid value, and since the tx_coalesce_usecs and rx_coalesce_usecs fields are already unsigned, remove the minimum value check. This allows assigning an ITR value ranging from 0-8160 as described by the printed message. Fixes: 65e87c0398f5 ("i40evf: support queue-specific settings for interrupt moderation") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-05i40e: Fix unexpected MFS warning messageIvan Vecera
Commit 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set") added a warning message that reports unexpected size of port's MFS (max frame size) value. This message use for the port number local variable 'i' that is wrong. In i40e_probe() this 'i' variable is used only to iterate VSIs to find FDIR VSI: <code> ... /* if FDIR VSI was set up, start it now */ for (i = 0; i < pf->num_alloc_vsi; i++) { if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) { i40e_vsi_open(pf->vsi[i]); break; } } ... </code> So the warning message use for the port number index of FDIR VSI if this exists or pf->num_alloc_vsi if not. Fix the message by using 'pf->hw.port' for the port number. Fixes: 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-05ice: Restore fix disabling RX VLAN filteringMarcin Szycik
Fix setting dis_rx_filtering depending on whether port vlan is being turned on or off. This was originally fixed in commit c793f8ea15e3 ("ice: Fix disabling Rx VLAN filtering with port VLAN enabled"), but while refactoring ice_vf_vsi_init_vlan_ops(), the fix has been lost. Restore the fix along with the original comment from that change. Also delete duplicate lines in ice_port_vlan_on(). Fixes: 2946204b3fa8 ("ice: implement bridge port vlan") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-05ice: change vfs.num_msix_per to vf->num_msixMichal Swiatkowski
vfs::num_msix_per should be only used as default value for vf->num_msix. For other use cases vf->num_msix should be used, as VF can have different MSI-X amount values. Fix incorrect register index calculation. vfs::num_msix_per and pf->sriov_base_vector shouldn't be used after implementation of changing MSI-X amount on VFs. Instead vf->first_vector_idx should be used, as it is storing value for first irq index. Fixes: fe1c5ca2fe76 ("ice: implement num_msix field per VF") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-05drm/edp-panel: Sort the panel entriesPin-yen Lin
Move the order of CMN 0x14e5 to make the list sorted. Signed-off-by: Pin-yen Lin <treapking@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231205123630.988663-3-treapking@chromium.org
2023-12-05drm/panel-edp: Add SDC ATNA45AF01Abel Vesa
Add support for the SDC ATNA45AF01 panel. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231201-x1e80100-drm-panel-edp-v2-1-b0173484631a@linaro.org
2023-12-05drm/i915: Fix ADL+ tiled plane stride when the POT stride is smaller than ↵Ville Syrjälä
the original plane_view_scanout_stride() currently assumes that we had to pad the mapping stride with dummy pages in order to align it. But that is not the case if the original fb stride exceeds the aligned stride used to populate the remapped view, which is calculated from the user specified framebuffer width rather than the user specified framebuffer stride. Ignore the original fb stride in this case and just stick to the POT aligned stride. Getting this wrong will cause the plane to fetch the wrong data, and can lead to fault errors if the page tables at the bogus location aren't even populated. TODO: figure out if this is OK for CCS, or if we should instead increase the width of the view to cover the entire user specified fb stride instead... Cc: Imre Deak <imre.deak@intel.com> Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231204202443.31247-1-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
2023-12-05octeontx2-af: fix a use-after-free in rvu_npa_register_reportersZhipeng Lu
The rvu_dl will be freed in rvu_npa_health_reporters_destroy(rvu_dl) after the create_workqueue fails, and after that free, the rvu_dl will be translate back through rvu_npa_health_reporters_create, rvu_health_reporters_create, and rvu_register_dl. Finally it goes to the err_dl_health label, being freed again in rvu_health_reporters_destroy(rvu) by rvu_npa_health_reporters_destroy. In the second calls of rvu_npa_health_reporters_destroy, however, it uses rvu_dl->rvu_npa_health_reporter, which is already freed at the end of rvu_npa_health_reporters_destroy in the first call. So this patch prevents the first destroy by instantly returning -ENONMEN when create_workqueue fails. In addition, since the failure of create_workqueue is the only entrence of label err, it has been integrated into the error-handling path of create_workqueue. Fixes: f1168d1e207c ("octeontx2-af: Add devlink health reporters for NPA") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Acked-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Geethasowjanya Akula <gakula@marvell.com> Link: https://lore.kernel.org/r/20231202095902.3264863-1-alexious@zju.edu.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-05drm/atomic: add private obj state to state dumpDmitry Baryshkov
The drm_atomic_print_new_state() already prints private object state via drm_atomic_private_obj_print_state(). Add private object state dumping to __drm_state_dump(), so that it is also included into drm_state_dump() output and into debugfs/dri/N/state file. Reviewed-by: Rob Clark <robdclark@gmail.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231203000532.1290480-2-dmitry.baryshkov@linaro.org
2023-12-05drm/gpuvm: Let drm_gpuvm_bo_put() report when the vm_bo object is destroyedBoris Brezillon
Some users need to release resources attached to the vm_bo object when it's destroyed. In Panthor's case, we need to release the pin ref so BO pages can be returned to the system when all GPU mappings are gone. This could be done through a custom drm_gpuvm::vm_bo_free() hook, but this has all sort of locking implications that would force us to expose a drm_gem_shmem_unpin_locked() helper, not to mention the fact that having a ::vm_bo_free() implementation without a ::vm_bo_alloc() one seems odd. So let's keep things simple, and extend drm_gpuvm_bo_put() to report when the object is destroyed. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231204151406.1977285-1-boris.brezillon@collabora.com
2023-12-05drm/panfrost: Synchronize and disable interrupts before powering offAngeloGioacchino Del Regno
To make sure that we don't unintentionally perform any unclocked and/or unpowered R/W operation on GPU registers, before turning off clocks and regulators we must make sure that no GPU, JOB or MMU ISR execution is pending: doing that requires to add a mechanism to synchronize the interrupts on suspend. Add functions panfrost_{gpu,job,mmu}_suspend_irq() which will perform interrupts masking and ISR execution synchronization, and then call those in the panfrost_device_runtime_suspend() handler in the exact sequence of job (may require mmu!) -> mmu -> gpu. As a side note, JOB and MMU suspend_irq functions needed some special treatment: as their interrupt handlers will unmask interrupts, it was necessary to add an `is_suspended` bitmap which is used to address the possible corner case of unintentional IRQ unmasking because of ISR execution after a call to synchronize_irq(). At resume, clear each is_suspended bit in the reset path of JOB/MMU to allow unmasking the interrupts. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231204114215.54575-4-angelogioacchino.delregno@collabora.com
2023-12-05drm/panfrost: Add gpu_irq, mmu_irq to struct panfrost_deviceAngeloGioacchino Del Regno
In preparation for adding a IRQ synchronization mechanism for PM suspend, add gpu_irq and mmu_irq variables to struct panfrost_device and change functions panfrost_gpu_init() and panfrost_mmu_init() to use those. Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231204114215.54575-3-angelogioacchino.delregno@collabora.com
2023-12-05drm/panfrost: Ignore core_mask for poweroff and disable PWRTRANS irqAngeloGioacchino Del Regno
Some SoCs may be equipped with a GPU containing two core groups and this is exactly the case of Samsung's Exynos 5422 featuring an ARM Mali-T628 MP6 GPU: the support for this GPU in Panfrost is partial, as this driver currently supports using only one core group and that's reflected on all parts of it, including the power on (and power off, previously to this patch) function. The issue with this is that even though executing the soft reset operation should power off all cores unconditionally, on at least one platform we're seeing a crash that seems to be happening due to an interrupt firing which may be because we are calling power transition only on the first core group, leaving the second one unchanged, or because ISR execution was pending before entering the panfrost_gpu_power_off() function and executed after powering off the GPU cores, or all of the above. Finally, solve this by: - Avoid to enable the power transition interrupt on reset; and - Ignoring the core_mask and ask the GPU to poweroff both core groups Fixes: 22aa1a209018 ("drm/panfrost: Really power off GPU cores in panfrost_gpu_power_off()") Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231204114215.54575-2-angelogioacchino.delregno@collabora.com
2023-12-05drm/i915: correct the input parameter on _intel_dsb_commit()heminhong
Current, the dewake_scanline variable is defined as unsigned int, an unsigned int variable that is always greater than or equal to 0. when _intel_dsb_commit function is called by intel_dsb_commit function, the dewake_scanline variable may have an int value. So the dewake_scanline variable is necessary to defined as an int. Fixes: f83b94d23770 ("drm/i915/dsb: Use DEwake to combat PkgC latency") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310052201.AnVbpgPr-lkp@intel.com/ Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Signed-off-by: heminhong <heminhong@kylinos.cn> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231114024341.14524-1-heminhong@kylinos.cn (cherry picked from commit ef32c3cc9c62252986f09e06b4e525742cd91529) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-12-05drm/i915/mst: Reject modes that require the bigjoinerVille Syrjälä
We have no bigjoiner support in the MST code, so .mode_valid() pretending otherwise is just going to result black screens for users. Reject any mode that needs the joiner. Cc: stable@vger.kernel.org Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 9c058492b16f90bb772cb0dad567e8acc68e155d) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-12-05drm/i915/mst: Fix .mode_valid_ctx() return valuesVille Syrjälä
.mode_valid_ctx() returns an errno, not the mode status. Fix the code to do the right thing. Cc: stable@vger.kernel.org Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit c1799032d2ef6616113b733428dfaa2199a5604b) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-12-05drm/i915: Skip some timing checks on BXT/GLK DSI transcodersVille Syrjälä
Apparently some BXT/GLK systems have DSI panels whose timings don't agree with the normal cpu transcoder hblank>=32 limitation. This is perhaps fine as there are no specific hblank/etc. limits listed for the BXT/GLK DSI transcoders. Move those checks out from the global intel_mode_valid() into into connector specific .mode_valid() hooks, skipping BXT/GLK DSI connectors. We'll leave the basic [hv]display/[hv]total checks in intel_mode_valid() as those seem like sensible upper limits regardless of the transcoder used. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9720 Fixes: 8f4b1068e7fc ("drm/i915: Check some transcoder timing minimum limits") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit e0ef2daa8ca8ce4dbc2fd0959e383b753a87fd7d) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-12-05drm/bridge: tc358768: select CONFIG_VIDEOMODE_HELPERSArnd Bergmann
A dependency on this feature was recently introduced: x86_64-linux-ld: vmlinux.o: in function `tc358768_bridge_pre_enable': tc358768.c:(.text+0xbe3dae): undefined reference to `drm_display_mode_to_videomode' Make sure this is always enabled. Fixes: e5fb21678136 ("drm/bridge: tc358768: Use struct videomode") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231204072814.968816-1-arnd@kernel.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231204072814.968816-1-arnd@kernel.org
2023-12-05drm/panel-simple: add Evervision VGG644804 panel entryMichael Walle
Timings taken from the datasheet, although sometimes there are just typical values and it's not clear if they are no min and max values or if you must use the typical value exactly. To make things worse, there is no back porch but only a combined sync and back porch length. Unfortunately, there is not public datasheet. Therefore, here are the relevant timings: | min | typ | max | -----------------+-----+--------+-----+ CLK frequency | - | 25.175 | - | HS period | - | 800 | - | HS pulse width | 5 | 30 | - | HS-DEN time | 112 | 144 | 175 | DEN pulse width | - | 640 | - | VS pulse width | 1 | 3 | 5 | VS-DEN time | - | 35 | - | VS period | - | 525 | - | Signed-off-by: Michael Walle <mwalle@kernel.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231123102404.2022201-2-mwalle@kernel.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231123102404.2022201-2-mwalle@kernel.org
2023-12-05drm/panel: ilitek-ili9881c: Add Ampire AM8001280G LCD panelPhilipp Zabel
Add support for Ampire AM8001280G LCD panels. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231123-drm-panel-ili9881c-am8001280g-v1-3-fdf4d624c211@pengutronix.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231123-drm-panel-ili9881c-am8001280g-v1-3-fdf4d624c211@pengutronix.de
2023-12-05drm/panel: ilitek-ili9881c: make use of prepare_prev_firstMarco Felsch
The panel.prepare() call requires an initialized MIPI-DSI host, so set the prepare_prev_first flag to indicate that the host must be initialized first. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231123-drm-panel-ili9881c-am8001280g-v1-1-fdf4d624c211@pengutronix.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231123-drm-panel-ili9881c-am8001280g-v1-1-fdf4d624c211@pengutronix.de
2023-12-05drm/panel: himax-hx8394: Add Support for Powkiddy X55 panelChris Morgan
Add support for the Powkiddy X55 panel as used on the Powkiddy X55 handheld gaming console. This panel uses a Himax HX8394 display controller and requires a vendor provided init sequence. The display resolution is 720x1280 and is 67mm by 121mm as measured with calipers. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231204185719.569021-7-macroalpha82@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231204185719.569021-7-macroalpha82@gmail.com
2023-12-05drm/panel: himax-hx8394: Add Panel Rotation SupportChris Morgan
Add support for setting the rotation property for the Himax HX8394 panel. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231204185719.569021-5-macroalpha82@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231204185719.569021-5-macroalpha82@gmail.com
2023-12-05drm/panel: himax-hx8394: Drop shutdown logicChris Morgan
The driver shutdown is duplicate as it calls drm_unprepare and drm_disable which are called anyway when associated drivers are shutdown/removed. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231204185719.569021-3-macroalpha82@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231204185719.569021-3-macroalpha82@gmail.com
2023-12-05drm/panel: himax-hx8394: Drop prepare/unprepare trackingChris Morgan
Drop the panel specific prepare/unprepare logic. This is now tracked by the DRM stack [1]. [1] commit d2aacaf07395 ("drm/panel: Check for already prepared/enabled in drm_panel") Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231204185719.569021-2-macroalpha82@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231204185719.569021-2-macroalpha82@gmail.com
2023-12-05drm/panel: simple: Add BOE BP101WX1-100 panelTony Lindgren
This panel is found on Motorola mapphone tablets from mz615 to mz617. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231127051547.15023-2-tony@atomide.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231127051547.15023-2-tony@atomide.com
2023-12-04net: stmmac: fix FPE events losingJianheng Zhang
The status bits of register MAC_FPE_CTRL_STS are clear on read. Using 32-bit read for MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket() clear the status bits. Then the stmmac interrupt handler missing FPE event status and leads to FPE handshaking failure and retries. To avoid clear status bits of MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket(), add fpe_csr to stmmac_fpe_cfg structure to cache the control bits of MAC_FPE_CTRL_STS and to avoid reading MAC_FPE_CTRL_STS in those methods. Fixes: 5a5586112b92 ("net: stmmac: support FPE link partner hand-shaking procedure") Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Jianheng Zhang <Jianheng.Zhang@synopsys.com> Link: https://lore.kernel.org/r/CY5PR12MB637225A7CF529D5BE0FBE59CBF81A@CY5PR12MB6372.namprd12.prod.outlook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-04octeontx2-pf: consider both Rx and Tx packet stats for adaptive interrupt ↵Naveen Mamindlapalli
coalescing The current adaptive interrupt coalescing code updates only rx packet stats for dim algorithm. This patch also updates tx packet stats which will be useful when there is only tx traffic. Also moved configuring hardware adaptive interrupt setting to driver dim callback. Fixes: 6e144b47f560 ("octeontx2-pf: Add support for adaptive interrupt coalescing") Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Suman Ghosh <sumang@marvell.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Link: https://lore.kernel.org/r/20231201053330.3903694-1-sumang@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-05Merge tag 'drm-intel-fixes-2023-12-01-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v6.7-rc4 #2: - d21a3962d304 ("drm/i915: Call intel_pre_plane_updates() also for pipes getting enabled") in the previous fixes pull depends on a change that wasn't included. Pick it up. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87fs0m48ol.fsf@intel.com
generated by cgit (git 2.34.1) at 2025-09-28 12:37:43 +0000