| Age | Commit message (Collapse) | Author |
|---|
|
Part of the undefined opcode data is updated in
gaudi2_handle_qman_err_generic() and some in
handle_lower_qman_data_on_err().
However, the 'write_enable' flag is checked only in
gaudi2_handle_qman_err_generic(), and information of more than a single
error can be mixed there.
Moreover, handle_lower_qman_data_on_err() is called only for the lower
QMAN, so for an error in the upper QMAN there is only a partial info.
Move all the data update to be done in a single place, protected by the
'write_enable' flag.
As mainly the lower QMAN's info is interesting, avoid saving the partial
info for the upper QMAN.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The device debugfs directory was modified to be named as the
device-name.
This name is the parent device name, i.e. either the PCI address in case
of an ASIC, or the simulator device name in case of a simulator.
This change makes it more difficult for a user to access the debugfs
directory for a specific accel device, because he can't just use the
accel minor id, but he needs to do more device-dependent operations to
get the device name.
To make it easier to get this name, add a 'parent_device' sysfs
attribute that the user can read using the minor id before accessing
debugfs.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
QM instructions are in multiples of 64 bits and the command type is in
the upper bits of first QWORD.
To make it clearer that an undefined command is due to a type of 0x0,
always print all 64 bits and add a zero padding if needed.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Infineon controller second stage has 3 instances that their version
need to be reported by driver.
Signed-off-by: Ariel Suller <asuller@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
User will provide a nonce via the INFO ioctl, and will retrieve
the signed device info generated using given nonce.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The QM CQ PTR_LO/PTR_HI/TSIZE registers are for pushing a CQ entry, and
although they are updated by HW even when descriptors are fetched by PQ
and CB addresses are fed into CQ, the correct registers to use when
dumping the CQ info are the ones with the _STS suffix.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Module ID exposes the physical location of the device in the server,
from the pov of the devices in regard to how they are connected by
internal fabric.
This information is already exposed in our INFO ioctl, but there are
utilities and scripts running in data-center which are already
accessing sysfs for topology information and it is easier for them
to continue getting that information from sysfs instead of opening
a file descriptor.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Failure to map is considered a non-trivial error and we need to notify
the user about it.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Upon a QM error, the address/size from both the CQ and the ARC_CQ are
printed, although the instruction that led to the error was received
from only one of them.
Moreover, in case of a QM undefined opcode, only one of these
address/size sets will be captured based on the value of ARC_CQ_PTR.
However, this value can be non-zero even if currently the CQ is used, in
case the CQ/ARC_CQ are alternately used.
Under the assumption of having a stop-on-error configuration, modify to
use CP_STS.CUR_CQ field to get the relevant CQ for the QM error.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
hl_device_cond_reset() might be called with the hard reset flag unset,
because a compute reset upon device release as part of a graceful reset
is valid.
If the conditions for graceful reset are not met, hl_device_reset() will
be called for an immediate reset. In this case a compute reset is not
valid, so it will be replaced with a hard reset together with a debug
message about it.
This message might be confusing, as it implies that a compute reset was
requested when it shouldn't. To prevent this confusion, set the hard
reset flag in hl_device_cond_reset() if going to an immediate reset.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The print was added long back for a specific debug and can
now be removed.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
currently the undefined opcode event bit in set only for lower cp and
only if 'write_enable' is true. It should be set anyway and for all
streams in order to report that event to userspace.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Stop rescheduling another heartbeat check when EQ heartbeat check fails
as it generates confusing logs in dmesg that the heartbeat fails.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Gaudi2 with PCI revision ID with the value of '3' represents Gaudi2C
device and should be detected and initialized as Gaudi2.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Add error log when no eq event is received from FW,
to cover a scenario when FW is stuck for some reason.
In such case driver will not receive neither the eq error interrupt
or the eq heartbeat event, and will just initiate a reset without
indication in the dmesg about the reason.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
When a PCIe AXI drain event happens, it is possible that the driver
cannot access the device through PCIe, and therefore cannot send a
hard-reset request to FW.
Starting from FW version 1.13, FW will initiate a hard-reset in such
a case without waiting for a reset request from the driver.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Use a predefined mask which set the device critical boot errors.
Driver will fail and stop its loading, only upon detecting at least
one of those errors defined in this mask.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
When working on a bare-metal system, if FLR will happen the firmware
will handle it and driver will have no knowledge of it, and this will
cause two issues:
1.The driver will be in operational state while it should be in reset.
This will cause the heartbeat mechanism to keep sending messages to FW
while pci device is in reset. Eventually heartbeat will fail and
the device will end up in non-operational state.
2. After FW handles the FLR, and due to the reset it'll go back to
preboot stage, and driver need to perform hard reset in order to
load the boot fit binary.
This patch will add reset_prepare hook that will set the device to
be in disabled state, so it'll be not operational, and also
reset_done hook which will be called after the actual FLR handling,
then it will perform hard reset.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.8-2023-12-08:
amdgpu:
- SR-IOV fixes
- DCN 3.5 updates
- Backlight fixes
- MST fixes
- DMCUB fixes
- DPIA fixes
- Display powergating updates
- Enable writeback connectors
- Misc code cleanups
- Add more register state debugging for aquavanjaram
- Suspend fix
- Clockgating fixes
- SMU 14 updates
- PSR fixes
- MES logging updates
- Misc fixes
amdkfd:
- SVM fix
radeon:
- Fix potential memory leaks in error paths
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208205613.4861-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- drm/i915: Implement fdinfo memory stats printing
Use the newly added drm_print_memory_stats helper to show memory
utilisation of our objects in drm/driver specific fdinfo output.
To collect the stats we walk the per memory regions object lists
and accumulate object size into the respective drm_memory_stats
categories.
Cross-subsystem Changes:
- Backmerge of drm-next (to bring drm-intel-next for PXP changes)
Driver Changes:
- Wa_18028616096 now applies to all DG2 (Matt R)
- Drop Wa_22014600077 on all DG2 (Matt R)
- Add new ATS-M device ID (Haridhar)
- More Meteorlake (MTL) workarounds (Matt R, Dnyaneshwar, Jonathan,
Gustavo, Radhakrishna)
- PMU WARN_ON cleanup on driver unbind (Umesh)
- Limit GGTT WC flushing workaround to pre BXT/ICL platforms
- Complement implementation for Wa_16018031267 / Wa_16018063123
(Andrzej, Jonathan, Nirmoy, Chris)
- Properly print internal GSC engine in trace logs (Tvrtko)
- Track gt pm wakerefs (Andrzej)
- Fix null deref bugs on perf code when perf is disabled (Harshit,
Tvrtko)
- Fix __i915_request_create memory leak on driver unbind (Andrzej)
- Remove spurious unsupported HuC message on MTL (Daniele)
- Read a shadowed mmio register for ggtt flush (Vinay)
- Add missing new-line to GT_TRACE (Andrzej)
- Add drm_dbgs for critical PXP events (Alan)
- Skip pxp init if gt is wedged (Zhanjun)
- Replace custom intel runtime_pm tracker with ref_tracker library
(Andrzej)
- Compiler warning/static checker/coding style cleanups (Arnd, Nirmoy,
Soumya, Gilbert, Dorcas, Kunwu, Sam, Tvrtko)
- Code structure and helper cleanups (Jani, Tvrtko, Andi)
- Selftest improvements (John, Tvrtko, Andrzej)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/gt/intel_gt_mcr.c
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZXNBcsSwJEVsq9On@jlahtine-mobl.ger.corp.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
One bug fix
- Add a missing call to drm_atomic_helper_shutdown() in Exynos DRM
driver.
This function is necessary during system shutdown and when the driver
is unbound. Without this function, components like panels may not shut
down properly, potentially leading to power issue as mentioned in the
kernel documentation, specially in the "driver instance overview"
secstion of 'drm_drv.c'.
Two cleanups
- Convert '.remove()' callback function in the Exynos DRM platform
driver to a version that returns void instead of an integer.
- Change connector type of exynos_drm_dpi.c module to DPI.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231212051134.48524-1-inki.dae@samsung.com
|
|
When exynos_drm_dpi.c was written, DRM_MODE_CONNECTOR_DPI did not exist
yet and I guess that's the reason why DRM_MODE_CONNECTOR_VGA was used as
the connector type.
However, now it makes more sense to use DRM_MODE_CONNECTOR_DPI as the
connector type.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
fix merge conflict and drop duplicated patch description.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time
and at driver unbind time. Among other things, this means that if a
panel is in use that it won't be cleanly powered off at system
shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart and at driver remove (or unbind) time comes
straight out of the kernel doc "driver instance overview" in
drm_drv.c.
A few notes about this fix:
- When adding drm_atomic_helper_shutdown() to the unbind path, I added
it after drm_kms_helper_poll_fini() since that's when other drivers
seemed to have it.
- Technically with a previous patch, ("drm/atomic-helper:
drm_atomic_helper_shutdown(NULL) should be a noop"), we don't
actually need to check to see if our "drm" pointer is NULL before
calling drm_atomic_helper_shutdown(). We'll leave the "if" test in,
though, so that this patch can land without any dependencies. It
could potentially be removed later.
- This patch also makes sure to set the drvdata to NULL in the case of
bind errors to make sure that shutdown can't access freed data.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-next
Two fixups
- Fix a potential error pointer dereference by checking the return value
of exynos_drm_crtc_get_by_type() function before accessing to crtc
object.
- Fix a wrong error checking in exynos_drm_dma.c modules, which was reported
by Dan[1]
[1] https://lore.kernel.org/all/33e52277-1349-472b-a55b-ab5c3462bfcf@moroto.mountain/
|
|
Linux 6.7-rc5
Alex requested this for some amdkfd work relying on the symbols exports.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- fix an error path after a failed export in sysfs code
* tag 'gpio-fixes-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: sysfs: Fix error handling on failed export
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 6.7-rc5 to resolve some reported
issues. Included in here are:
- usb gadget f_hid, and uevent fix
- xhci driver revert to resolve a much-reported issue
- typec driver fix
All of these have been in linux-next with no reported issues"
* tag 'usb-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: f_hid: fix report descriptor allocation
Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1"
usb: typec: class: fix typec_altmode_put_partner to put plugs
USB: gadget: core: adjust uevent timing on gadget unbind
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are some small serial driver fixes for 6.7-rc4 to resolve some
reported issues. Included in here are:
- pl011 dma support fix
- sc16is7xx driver fix
- ma35d1 console index fix
- 8250 driver fixes for small issues
All of these have been in linux-next with no reported issues"
* tag 'tty-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_dw: Add ACPI ID for Granite Rapids-D UART
serial: ma35d1: Validate console index before assignment
ARM: PL011: Fix DMA support
serial: sc16is7xx: address RX timeout interrupt errata
serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bit
serial: 8250_omap: Add earlycon support for the AM654 UART controller
serial: 8250: 8250_omap: Do not start RX DMA on THRI interrupt
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are some small fixes for 6.7-rc5 for a variety of small driver
subsystems. Included in here are:
- debugfs revert for reported issue
- greybus revert for reported issue
- greybus fixup for endian build warning
- coresight driver fixes
- nvmem driver fixes
- devcoredump fix
- parport new device id
- ndtest build fix
All of these have ben in linux-next with no reported issues"
* tag 'char-misc-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
nvmem: Do not expect fixed layouts to grab a layout driver
parport: Add support for Brainboxes IX/UC/PX parallel cards
Revert "greybus: gb-beagleplay: Ensure le for values in transport"
greybus: gb-beagleplay: Ensure le for values in transport
greybus: BeaglePlay driver needs CRC_CCITT
Revert "debugfs: annotate debugfs handlers vs. removal with lockdep"
devcoredump: Send uevent once devcd is ready
ndtest: fix typo class_regster -> class_register
misc: mei: client.c: fix problem of return '-EOVERFLOW' in mei_cl_write
misc: mei: client.c: return negative error code in mei_cl_write
mei: pxp: fix mei_pxp_send_message return value
coresight: ultrasoc-smb: Fix uninitialized before use buf_hw_base
coresight: ultrasoc-smb: Config SMB buffer before register sink
coresight: ultrasoc-smb: Fix sleep while close preempt in enable_smb
Documentation: coresight: fix `make refcheckdocs` warning
hwtracing: hisi_ptt: Don't try to attach a task
hwtracing: hisi_ptt: Handle the interrupt in hardirq context
hwtracing: hisi_ptt: Add dummy callback pmu::read()
coresight: Fix crash when Perf and sysfs modes are used concurrently
coresight: etm4x: Remove bogous __exit annotation for some functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"One tiny fix to the be2iscsi driver fixing a memory leak in an error
leg"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: be2iscsi: Fix a memleak in beiscsi_init_wrb_handle()
|
|
Pull block fixes from Jens Axboe:
"Nothing major in here, just miscellanous fixes for MD and NVMe:
- NVMe pull request via Keith:
- Proper nvme ctrl state setting (Keith)
- Passthrough command optimization (Keith)
- Spectre fix (Nitesh)
- Kconfig clarifications (Shin'ichiro)
- Frozen state deadlock fix (Bitao)
- Power setting quirk (Georg)
- MD pull requests via Song:
- 6.7 regresisons with recovery/sync (Yu)
- Reshape fix (David)"
* tag 'block-6.7-2023-12-08' of git://git.kernel.dk/linux:
md: split MD_RECOVERY_NEEDED out of mddev_resume
nvme-pci: Add sleep quirk for Kingston drives
md: fix stopping sync thread
md: don't leave 'MD_RECOVERY_FROZEN' in error path of md_set_readonly()
md: fix missing flush of sync_work
nvme: fix deadlock between reset and scan
nvme: prevent potential spectre v1 gadget
nvme: improve NVME_HOST_AUTH and NVME_TARGET_AUTH config descriptions
nvme-ioctl: move capable() admin check to the end
nvme: ensure reset state check ordering
nvme: introduce helper function to get ctrl state
md/raid6: use valid sector values to determine if an I/O should wait on the reshape
|
|
Pull rdma fixes from Jason Gunthorpe:
"Primarily rtrs and irdma fixes:
- Fix uninitialized value in ib_get_eth_speed()
- Fix hns refusing to work if userspace doesn't select the correct
congestion control algorithm
- Several irdma fixes - unreliable Send Queue Drain, use after free,
64k page size bugs, device removal races
- Several rtrs bug fixes - crashes, memory leaks, use after free, bad
credit accounting, bogus WARN_ON
- Typos and a MAINTAINER update"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/irdma: Avoid free the non-cqp_request scratch
RDMA/irdma: Fix support for 64k pages
RDMA/irdma: Ensure iWarp QP queue memory is OS paged aligned
RDMA/core: Fix umem iterator when PAGE_SIZE is greater then HCA pgsz
RDMA/irdma: Fix UAF in irdma_sc_ccq_get_cqe_info()
RDMA/bnxt_re: Correct module description string
RDMA/rtrs-clt: Remove the warnings for req in_use check
RDMA/rtrs-clt: Fix the max_send_wr setting
RDMA/rtrs-srv: Destroy path files after making sure no IOs in-flight
RDMA/rtrs-srv: Free srv_mr iu only when always_invalidate is true
RDMA/rtrs-srv: Check return values while processing info request
RDMA/rtrs-clt: Start hb after path_up
RDMA/rtrs-srv: Do not unconditionally enable irq
MAINTAINERS: Add Chengchang Tang as Hisilicon RoCE maintainer
RDMA/irdma: Add wait for suspend on SQD
RDMA/irdma: Do not modify to SQD on error
RDMA/hns: Fix unnecessary err return when using invalid congest control algorithm
RDMA/core: Fix uninit-value access in ib_get_eth_speed()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix cpufreq reference counting in the DTPM (dynamic thermal and power
management) power capping framework (Lukasz Luba)"
* tag 'pm-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: DTPM: Fix missing cpufreq_cpu_put() calls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a possible crash on an attempt to free unallocated memory in the
error path of acpi_evaluate_reference() that has been introduced by
one of the recent changes (Rafael Wysocki)"
* tag 'acpi-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: utils: Fix error path in acpi_evaluate_reference()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- acpi_power_meter: Fix 4.29 MW output seen if acpi reports bad data
- corsair-psu: Fix ability to probe if the driver is built into the kernel
- ltc2991: Fix spelling mistake "contiuous" -> "continuous"
- max31827: Add missing regulator header file include
- nzxt-kraken2: Fix error handling path in probe function
* tag 'hwmon-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (corsair-psu) Fix probe when built-in
hwmon: (nzxt-kraken2) Fix error handling path in kraken2_probe()
hwmon: (acpi_power_meter) Fix 4.29 MW bug
hwmon: max31827: include regulator header
hwmon: ltc2991: Fix spelling mistake "contiuous" -> "continuous"
|
|
Pull pwm fix from Uwe Kleine-König:
"This fixes a null pointer exception in the bcm2835 pwm driver.
The problem was introduced by a combination of two commits merged for
v6.7-rc1 where each change alone would have been fine.
Thanks to Florian Fainelli for noticing and fixing the issue"
* tag 'pwm/for-6.7-rc5-fixes' of https://git.pengutronix.de/git/ukl/linux:
pwm: bcm2835: Fix NPD in suspend/resume
|
|
Pull drm fixes from Dave Airlie:
"Regular weekly fixes, mostly amdgpu and i915 as usual. A couple of
nouveau, panfrost, one core and one bridge Kconfig.
Seems about normal for rc5.
atomic-helpers:
- invoke end_fb_access while owning plane state
i915:
- fix a missing dep for a previous fix
- Relax BXT/GLK DSI transcoder hblank limits
- Fix DP MST .mode_valid_ctx() return values
- Reject DP MST modes that require bigjoiner (as it's not yet
supported on DP MST)
- Fix _intel_dsb_commit() variable type to allow negative values
nouveau:
- document some bits of gsp rm
- flush vmm more on tu102 to avoid hangs
panfrost:
- fix imported dma-buf objects residency
- fix device freq update
bridge:
- tc358768 - fix Kconfig
amdgpu:
- Disable MCBP on gfx9
- DC vbios fix
- eDP fix
- dml2 UBSAN fix
- SMU 14 fix
- RAS fixes
- dml KASAN/KCSAN fix
- PSP 13 fix
- Clockgating fixes
- Suspend fix
exynos:
- fix pointer dereference
- fix wrong error check"
* tag 'drm-fixes-2023-12-08' of git://anongit.freedesktop.org/drm/drm: (27 commits)
drm/exynos: fix a wrong error checking
drm/exynos: fix a potential error pointer dereference
drm/amdgpu: fix buffer funcs setting order on suspend
drm/amdgpu: Avoid querying DRM MGCG status
drm/amdgpu: Update HDP 4.4.2 clock gating flags
drm/amdgpu: Add NULL checks for function pointers
drm/amdgpu: Restrict extended wait to PSP v13.0.6
drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml
drm/amdgpu: optimize the printing order of error data
drm/amdgpu: Update fw version for boot time error query
drm/amd/pm: support new mca smu error code decoding
drm/amd/swsmu: update smu v14_0_0 driver if version and metrics table
drm/amd/display: Fix array-index-out-of-bounds in dml2
drm/amd/display: Add monitor patch for specific eDP
drm/amd/display: Use channel_width = 2 for vram table 3.0
drm/amdgpu: disable MCBP by default
drm/atomic-helpers: Invoke end_fb_access while owning plane state
drm/i915: correct the input parameter on _intel_dsb_commit()
drm/i915/mst: Reject modes that require the bigjoiner
drm/i915/mst: Fix .mode_valid_ctx() return values
...
|
|
It seems that when the driver is built-in, the HID bus is
initialized after the driver is loaded, which whould cause
module_hid_driver() to fail.
Fix this by registering the driver after the HID bus using
late_initcall() in accordance with other hwmon HID drivers.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231207210723.222552-1-W_Armin@gmx.de
[groeck: Dropped "compile tested" comment; the patch has been tested
but the tester did not provide a Tested-by: tag]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes are devicetree fixes for NXP, Mediatek, Rockchips
Arm machines as well as Microchip RISC-V, and most of these address
build-time warnings for spec violations and other minor issues. One of
the Mediatek warnings was enabled by default and prevented a clean
build.
The ones that address serious runtime issues are all on the i.MX
platform:
- a boot time panic on imx8qm
- USB hanging under load on imx8
- regressions on the imx93 ethernet phy
Code fixes include a minor error handling for the i.MX PMU driver, and
a number of firmware driver fixes:
- OP-TEE fix for supplicant based device enumeration, and a new sysfs
attribute to needed to fix a race against userspace
- Arm SCMI fix for possible truncation/overflow in the frequency
computations
- Multiple FF-A fixes for the newly added notification support"
* tag 'soc-fixes-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (55 commits)
MAINTAINERS: change the S32G2 maintainer's email address.
arm64: dts: rockchip: Fix eMMC Data Strobe PD on rk3588
ARM: dts: imx28-xea: Pass the 'model' property
ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gpt
MAINTAINERS: reinstate freescale ARM64 DT directory in i.MX entry
arm64: dts: imx8-apalis: set wifi regulator to always-on
ARM: imx: Check return value of devm_kasprintf in imx_mmdc_perf_init
arm64: dts: imx8ulp: update gpio node name to align with register address
arm64: dts: imx93: update gpio node name to align with register address
arm64: dts: imx93: correct mediamix power
arm64: dts: imx8qm: Add imx8qm's own pm to avoid panic during startup
arm64: dts: freescale: imx8-ss-dma: Fix #pwm-cells
arm64: dts: freescale: imx8-ss-lsio: Fix #pwm-cells
dt-bindings: pwm: imx-pwm: Unify #pwm-cells for all compatibles
ARM: dts: imx6ul-pico: Describe the Ethernet PHY clock
arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3
arm64: dts: rockchip: Fix PCI node addresses on rk3399-gru
arm64: dts: rockchip: drop interrupt-names property from rk3588s dfi
firmware: arm_scmi: Fix possible frequency truncation when using level indexing mode
firmware: arm_scmi: Fix frequency truncation by promoting multiplier type
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"31 hotfixes. Ten of these address pre-6.6 issues and are marked
cc:stable. The remainder address post-6.6 issues or aren't considered
serious enough to justify backporting"
* tag 'mm-hotfixes-stable-2023-12-07-18-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
mm/madvise: add cond_resched() in madvise_cold_or_pageout_pte_range()
nilfs2: prevent WARNING in nilfs_sufile_set_segment_usage()
mm/hugetlb: have CONFIG_HUGETLB_PAGE select CONFIG_XARRAY_MULTI
scripts/gdb: fix lx-device-list-bus and lx-device-list-class
MAINTAINERS: drop Antti Palosaari
highmem: fix a memory copy problem in memcpy_from_folio
nilfs2: fix missing error check for sb_set_blocksize call
kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP
units: add missing header
drivers/base/cpu: crash data showing should depends on KEXEC_CORE
mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions
scripts/gdb/tasks: fix lx-ps command error
mm/Kconfig: make userfaultfd a menuconfig
selftests/mm: prevent duplicate runs caused by TEST_GEN_PROGS
mm/damon/core: copy nr_accesses when splitting region
lib/group_cpus.c: avoid acquiring cpu hotplug lock in group_cpus_evenly
checkstack: fix printed address
mm/memory_hotplug: fix error handling in add_memory_resource()
mm/memory_hotplug: add missing mem_hotplug_lock
.mailmap: add a new address mapping for Chester Lin
...
|
|
Given a reference to "guc", the guc_to_i915() returns the
pointer to "i915" private data.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231206184322.57111-1-andi.shyti@linux.intel.com
|
|
After i915_active_unlock_wait i915_active can be still non-idle due
to barrier async handling in signal_irq_work. As a result one can observe
following errors:
bcs0: heartbeat pulse did not flush idle tasks
*ERROR* pulse active pulse_active [i915]:pulse_retire [i915]
*ERROR* pulse count: 0
*ERROR* pulse preallocated barriers? no
To prevent it let's wait explicitly for idleness.
v2: wait only in live_idle tests
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231205-selftest_wait_for_active_idle_event-v2-1-1437d0bf9829@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 6.8:
UAPI Changes:
- Remove Userspace Mode-Setting ioctls
- v3d: New uapi to handle jobs involving the CPU
Cross-subsystem Changes:
Core Changes:
- atomic: Add support for FB-less planes which got reverted a bit
later for lack of IGT tests and userspace code, Dump private objects
state in drm_state_dump.
- dma-buf: Add fence deadline support
- encoder: Create per-encoder debugfs directory, move the bridge chain
file to that directory
Driver Changes:
- Include drm_auth.h in driver that use it but don't include it, Drop
drm_plane_helper.h from drivers that include it but don't use it
- imagination: Plenty of small fixes
- panfrost: Improve interrupt handling at poweroff
- qaic: Convert to persistent DRM devices
- tidss: Support for the AM62A7, a few probe improvements, some cleanups
- v3d: Support for jobs involving the CPU
- bridge:
- Create transparent aux-bridge for DP/USB-C
- lt8912b: Add suspend/resume support and power regulator support
- panel:
- himax-hx8394: Drop prepare, unprepare and shutdown logic, Support
panel rotation
- New panels: BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G,
Evervision VGG644804, SDC ATNA45AF01
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/yu5heqaufyeo4nlowzieu4s5unwqrqyx4jixbfjmzdon677rpk@t53vceua2dao
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Improve display debug msgs and other general clean-ups (Ville, Rahuul)
- PSR fixes and improvements around selective fetch (Jouni, Ville)
- Remove FBC restrictions for Xe2LPD displays (Vinod)
- Skip some timing checks on BXT/GLK DSI transcoders (Ville)
- DP MST Fixes (Ville)
- Correct the input parameter on _intel_dsb_commit (heminhong)
- Fix IP version of the display WAs (Bala)
- DGFX uses direct VBT pin mapping (Clint)
- Proper handling of bool on PIPE_CONF_CHECK macros (Jani)
- Skip state verification with TBT-ALT mod (Mika Kahona)
- General organization of display code for reusage with Xe
(Jouni, Luca, Jani, Maarten)
- Squelch a sparse warning (Jani)
- Don't use "proxy" headers (Andy Shevchenko)
- Use devm_gpiod_get() for all GPIOs (Hans)
- Fix ADL+ tiled plane stride (Ville)
- Use octal permissions in display debugfs (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZXIWG6bRYaUw0w6-@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Two fixups
- Fix a potential error pointer dereference by checking the return value
of exynos_drm_crtc_get_by_type() function before accessing to crtc
object.
- Fix a wrong error checking in exynos_drm_dma.c modules, which was reported
by Dan[1]
[1] https://lore.kernel.org/all/33e52277-1349-472b-a55b-ab5c3462bfcf@moroto.mountain/
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207042223.2473706-1-inki.dae@samsung.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.7-2023-12-06:
amdgpu:
- Disable MCBP on gfx9
- DC vbios fix
- eDP fix
- dml2 UBSAN fix
- SMU 14 fix
- RAS fixes
- dml KASAN/KCSAN fix
- PSP 13 fix
- Clockgating fixes
- Suspend fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231206221102.4995-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v6.7-rc5:
- Document nouveau's GSP-RM.
- Flush vmm harder on nouveau tu102.
- Panfrost fix for imported dma-buf objects, and device frequency.
- Kconfig Build fix for tc358768.
- Call end_fb_access after atomic commit.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/05a26dc0-8cf1-4b1f-abb6-3bf471fbfc99@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - regressions:
- veth: fix packet segmentation in veth_convert_skb_to_xdp_buff
Current release - new code bugs:
- tcp: assorted fixes to the new Auth Option support
Older releases - regressions:
- tcp: fix mid stream window clamp
- tls: fix incorrect splice handling
- ipv4: ip_gre: handle skb_pull() failure in ipgre_xmit()
- dsa: mv88e6xxx: restore USXGMII support for 6393X
- arcnet: restore support for multiple Sohard Arcnet cards
Older releases - always broken:
- tcp: do not accept ACK of bytes we never sent
- require admin privileges to receive packet traces via netlink
- packet: move reference count in packet_sock to atomic_long_t
- bpf:
- fix incorrect branch offset comparison with cpu=v4
- fix prog_array_map_poke_run map poke update
- netfilter:
- three fixes for crashes on bad admin commands
- xt_owner: fix race accessing sk->sk_socket, TOCTOU null-deref
- nf_tables: fix 'exist' matching on bigendian arches
- leds: netdev: fix RTNL handling to prevent potential deadlock
- eth: tg3: prevent races in error/reset handling
- eth: r8169: fix rtl8125b PAUSE storm when suspended
- eth: r8152: improve reset and surprise removal handling
- eth: hns: fix race between changing features and sending
- eth: nfp: fix sleep in atomic for bonding offload"
* tag 'net-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
vsock/virtio: fix "comparison of distinct pointer types lacks a cast" warning
net/smc: fix missing byte order conversion in CLC handshake
net: dsa: microchip: provide a list of valid protocols for xmit handler
drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group
psample: Require 'CAP_NET_ADMIN' when joining "packets" group
bpf: sockmap, updating the sg structure should also update curr
net: tls, update curr on splice as well
nfp: flower: fix for take a mutex lock in soft irq context and rcu lock
net: dsa: mv88e6xxx: Restore USXGMII support for 6393X
tcp: do not accept ACK of bytes we never sent
selftests/bpf: Add test for early update in prog_array_map_poke_run
bpf: Fix prog_array_map_poke_run map poke update
netfilter: xt_owner: Fix for unsafe access of sk->sk_socket
netfilter: nf_tables: validate family when identifying table via handle
netfilter: nf_tables: bail out on mismatching dynset and set expressions
netfilter: nf_tables: fix 'exist' matching on bigendian arches
netfilter: nft_set_pipapo: skip inactive elements during set walk
netfilter: bpf: fix bad registration on nf_defrag
leds: trigger: netdev: fix RTNL handling to prevent potential deadlock
octeontx2-af: Update Tx link register range
...
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v6.7-rc5:
- d21a3962d304 ("drm/i915: Call intel_pre_plane_updates() also for pipes
getting enabled") in the previous fixes pull depends on a change that
wasn't included. Pick it up.
- Relax BXT/GLK DSI transcoder hblank limits
- Fix DP MST .mode_valid_ctx() return values
- Reject DP MST modes that require bigjoiner (as it's not yet supported on DP MST)
- Fix _intel_dsb_commit() variable type to allow negative values
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87msum1hv8.fsf@intel.com
|
