summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-03-30Merge tag 'nand/for-5.7' into mtd/nextMiquel Raynal
Raw NAND core changes: * Add support for manufacturer specific suspend/resume operation * Add support for manufacturer specific lock/unlock operation * Replace zero-length array with flexible-array member * Fix a typo ("manufecturer") * Ensure nand_soft_waitrdy wait period is enough Raw NAND controller driver changes: * Brcmnand: Add support for flash-edu for dma transfers (+ bindings) * Cadence: Reinit completion before executing a new command Change bad block marker size Fix the calculation of the avaialble OOB size Get meta data size from registers * Qualcom: Use dma_request_chan() instead dma_request_slave_channel() Release resources on failure within qcom_nandc_alloc() * Allwinner: Use dma_request_chan() instead dma_request_slave_channel() * Marvell: Use dma_request_chan() instead dma_request_slave_channel() Release DMA channel on error * Freescale: Use dma_request_chan() instead dma_request_slave_channel() * Macronix: Add support for Macronix NAND randomizer (+ bindings) * Ams-delta: Rename structures and functions to gpio_nand* Make the driver custom I/O ready Drop useless local variable Support custom driver initialisation Add module device tables Handle more GPIO pins as optional Make read pulses optional Don't hardcode read/write pulse widths Push inversion handling to gpiolib Enable OF partition info support Drop board specific partition info Use struct gpio_nand_platdata Write protect device during probe * Ingenic: Use devm_platform_ioremap_resource() Add dependency on MIPS || COMPILE_TEST * Denali: Deassert write protect pin * ST: Use dma_request_chan() instead dma_request_slave_channel() Raw NAND chip driver changes: * Toshiba: Support reading the number of bitflips for BENAND (Built-in ECC NAND) * Macronix: Add support for deep power down mode Add support for block protection SPI-NAND core changes: * Do not erase the block before writing a bad block marker * Explicitly use MTD_OPS_RAW to write the bad block marker to OOB * Stop using spinand->oobbuf for buffering bad block markers * Rework detect procedure for different READ_ID operation SPI-NAND driver changes: * Toshiba: Support for new Kioxia Serial NAND Rename function name to change suffix and prefix (8Gbit) Add comment about Kioxia ID * Micron: Add new Micron SPI NAND devices with multiple dies Add M70A series Micron SPI NAND devices identify SPI NAND device with Continuous Read mode Add new Micron SPI NAND devices Describe the SPI NAND device MT29F2G01ABAGD Generalize the OOB layout structure and function names
2020-03-30Merge branches 'edac-mc-cleanup', 'edac-misc', 'edac-drivers' and ↵Borislav Petkov
'edac-urgent' into edac-updates-for-5.7 Signed-off-by: Borislav Petkov <bp@suse.de>
2020-03-29net/mlx5e: add mlx5e_rep_indr_setup_ft_cb supportwenxu
Add mlx5e_rep_indr_setup_ft_cb to support indr block setup in FT mode. Both tc rules and flow table rules are of the same format, It can re-use tc parsing for that, and move the flow table rules to their steering domain(the specific chain_index), the indr block offload in FT also follow this scenario. Signed-off-by: wenxu <wenxu@ucloud.cn> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-29net/mlx5e: refactor indr setup blockwenxu
Refactor indr setup block for support ft indr setup in the next patch. The function mlx5e_rep_indr_offload exposes 'flags' in order set additional flag for FT in next patch. Rename mlx5e_rep_indr_setup_tc_block to mlx5e_rep_indr_setup_block and add flow_setup_cb_t callback parameters in order set the specific callback for FT in next patch. Signed-off-by: wenxu <wenxu@ucloud.cn> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-29net/mlx5: E-Switch: Move eswitch chains to a new directorySaeed Mahameed
eswitch_offloads_chains.{c,h} were just introduced this kernel release cycle, eswitch is in high development demand right now and many features are planned to be added to it. eswitch deserves its own directory and here we move these new files to there, in preparation for upcoming eswitch features and new files. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com>
2020-03-29net/mlx5: Use a separate work queue for fib event handlingMark Zhang
In VF lag mode when remove the bonding module without bring down the bond device first, we could potentially have circular dependency when we unload IB devices and also handle fib events: 1. The bond work starts first; 2. The "modprobe -rv bonding" process tries to release the bond device, with the "pernet_ops_rwsem" lock hold; 3. The bond work blocks in unregister_netdevice_notifier() and waits for the lock because fib event came right before; 4. The kernel fib module tries to free all the fib entries by broadcasting the "FIB_EVENT_NH_DEL" event; 5. Upon the fib event this lag_mp module holds the fib lock and queue a fib work. So: bond work -> modprobe task -> kernel fib module -> lag_mp -> bond work Today we either reload IB devices in roce lag in nic mode or either handle fib events in switchdev mode, but a new feature could change that we'll need to reload IB devices also in switchdev mode so this is a future proof fix as one may not notice this later. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-29Merge branch 'mlx5-next' of ↵Saeed Mahameed
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux * 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: mlx5: Remove uninitialized use of key in mlx5_core_create_mkey {IB,net}/mlx5: Move asynchronous mkey creation to mlx5_ib {IB,net}/mlx5: Assign mkey variant in mlx5_ib only {IB,net}/mlx5: Setup mkey variant before mr create command invocation Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-30mfd: intel-lpss: Fix Intel Elkhart Lake LPSS I2C input clockJarkko Nikula
Intel Elkhart Lake LPSS I2C has 100 MHz input clock instead of 133 MHz that was our preliminary information. This will result slower I2C bus clock when driver calculates its timing parameters in case ACPI tables don't provide them. Slower I2C bus clock is allowed but let's fix this to match with reality. While at it, keep the same default I2C device properties as Intel Broxton since it is not known do they need any update. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: aat2870: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
There is still one call of sprintf() without checking the proper buffer overflow in aat2870_dump_reg(). Replace it with scnprintf() call for covering that. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: dln2: Allow to be enumerated via ACPIAndy Shevchenko
On some platforms user may want to enumerate DLN2 device, its children, to be enumerated via ACPI. In order to achieve this, let's distinguish children by _ADR value. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: da9062: Add support for interrupt polarity defined in device treeShreyas Joshi
The da9062 interrupt handler cannot necessarily be low active. Add a function to configure the interrupt type based on what is defined in the device tree. The allowable interrupt type is either low or high level trigger. Signed-off-by: Shreyas Joshi <shreyas.joshi@biamp.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: dln2: Fix sanity checking for endpointsAndy Shevchenko
While the commit 2b8bd606b1e6 ("mfd: dln2: More sanity checking for endpoints") tries to harden the sanity checks it made at the same time a regression, i.e. mixed in and out endpoints. Obviously it should have been not tested on real hardware at that time, but unluckily it didn't happen. So, fix above mentioned typo and make device being enumerated again. While here, introduce an enumerator for magic values to prevent similar issue to happen in the future. Fixes: 2b8bd606b1e6 ("mfd: dln2: More sanity checking for endpoints") Cc: Oliver Neukum <oneukum@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: intel-lpss: Add Intel Comet Lake PCH-V PCI IDsAndy Shevchenko
Intel Comet Lake PCH-V has the same LPSS than Intel Kaby Lake. Add the new IDs to the list of supported devices. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: sc27xx: Add USB charger type detection supportBaolin Wang
The Spreadtrum SC27XX series PMICs supply the USB charger type detection function, and related registers are located on the PMIC global registers region, thus we implement and export this function in the MFD driver for users to get the USB charger type. Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: rk808: Convert RK805 to shutdown/suspend hooksRobin Murphy
RK805 has the same kind of dual-role sleep/shutdown pin as RK809/RK817, so it makes little sense for the driver to have to have two completely different mechanisms to handle essentially the same thing. Move RK805 over to the shutdown/suspend flow to clean things up. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: rk808: Reduce shutdown duplicationRobin Murphy
Rather than having 3 almost-identical functions plus the machinery to keep track of them, it's far simpler to just dynamically select the appropriate register field per variant. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: rk808: Stop using syscore opsRobin Murphy
Setting the SLEEP pin to its shutdown function for appropriate PMICs doesn't need to happen in single-CPU context, so there's really no point involving the syscore machinery. Hook it up to the standard driver model shutdown method instead. This also obviates the issue that the syscore ops weren't being unregistered on probe failure or module removal. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: rk808: Ensure suspend/resume hooks always workRobin Murphy
The RK809/RK817 suspend/resume hooks should not have to depend on whether this driver owns the pm_power_off hook, and thus the global rk808_i2c_client is set - indeed, the GPIO-based control is really only relevant when PSCI firmware is in charge of power rather than the kernel. As driver model callbacks, they have an appropriate device argument to hand, so can just always use that. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: rk808: Always use poweroff when requestedSoeren Moch
With the device tree property "rockchip,system-power-controller" we explicitly request to use this PMIC to power off the system. So always register our poweroff function, even if some other handler (probably PSCI poweroff) was registered before. This does tend to reveal a warning on shutdown due to the Rockchip I2C driver not implementing an atomic transfer method, however since the write to DEV_OFF takes effect immediately the I2C completion interrupt is moot anyway, and as the very last thing written to the console it is only visible to users going out of their way to capture serial output. Signed-off-by: Soeren Moch <smoch@web.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> [ rm: note potential warning in commit message ] Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: omap: Remove useless cast for driver.nameCorentin Labbe
device_driver name is const char pointer, so it not useful to cast xx_driver_name (which is already const char). Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: Kconfig: Fix some misspelling of the word functionalityChristophe JAILLET
Fix several variations of typo around functionali{ty,es}. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: pm8xxx: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: omap-usb-tll: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: cpcap: Fix compile if MFD_CORE is not selectedTony Lindgren
If only cpcap mfd driver is selected we will get: ERROR: "devm_mfd_add_devices" [drivers/mfd/motorola-cpcap.ko] undefined! This is because Kconfig is missing select for MFD_CORE. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30mfd: cros_ec: Check DT node for usbpd-notify addPrashant Malani
Add a check to ensure there is indeed an EC device tree entry before adding the cros-usbpd-notify device. This covers configs where both CONFIG_ACPI and CONFIG_OF are defined, but the EC device is defined using device tree and not in ACPI. Fixes: 4602dce0361e ("mfd: cros_ec: Add cros-usbpd-notify subdevice") Signed-off-by: Prashant Malani <pmalani@chromium.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-30Merge branches 'ib-mfd-iio-input-5.7' and 'ib-mfd-iio-rtc-5.7' into ↵Lee Jones
ibs-for-mfd-merged
2020-03-30iio: cros_ec: Use Hertz as unit for sampling frequencyGwendal Grignou
To be compliant with other sensors, set and get sensor sampling frequency in Hz, not mHz. Fixes: ae7b02ad2f32 ("iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs") Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-03-30Merge tag 'drm-intel-next-fixes-2020-03-27' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Fixes for instability on Baytrail and Haswell; Ice Lake RPS; Sandy Bridge RC6; and few others around GT hangchec/reset; livelock; and a null dereference. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200327081607.GA3082710@intel.com
2020-03-30Merge tag 'amd-drm-next-5.7-2020-03-26' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-next amd-drm-next-5.7-2020-03-26: amdgpu: - Remove a dpm quirk that is not necessary - Fix handling of AC/DC mode in newer SMU firmwares on navi - SR-IOV fixes - RAS fixes scheduler: - Fix a race condition radeon: - Remove a dpm quirk that is not necessary Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200326155310.5486-1-alexander.deucher@amd.com
2020-03-29mlx4: fix "initializer element not constant" compiler errorJacob Keller
A recent commit e8937681797c ("devlink: prepare to support region operations") used the region_cr_space_str and region_fw_health_str variables as initializers for the devlink_region_ops structures. This can result in compiler errors: drivers/net/ethernet/mellanox//mlx4/crdump.c:45:10: error: initializer element is not constant .name = region_cr_space_str, ^ drivers/net/ethernet/mellanox//mlx4/crdump.c:45:10: note: (near initialization for ‘region_cr_space_ops.name’) drivers/net/ethernet/mellanox//mlx4/crdump.c:50:10: error: initializer element is not constant .name = region_fw_health_str, The variables were made to be "const char * const", indicating that both the pointer and data were constant. This was enough to resolve this on recent GCC (gcc (GCC) 9.2.1 20190827 (Red Hat 9.2.1-1) for this author). Unfortunately this is not enough for older compilers to realize that the variable can be treated as a constant expression. Fix this by introducing macros for the string and use those instead of the variable name in the region ops structures. Reported-by: tanhuazhong <tanhuazhong@huawei.com> Fixes: e8937681797c ("devlink: prepare to support region operations") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29net: dsa: mt7530: use resolved link config in mac_link_up()René van Dorst
Convert the mt7530 switch driver to use the finalised link parameters in mac_link_up() rather than the parameters in mac_config(). Signed-off-by: René van Dorst <opensource@vdorst.com> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29net: dsa: sja1105: show more ethtool statistics counters for P/Q/R/SVladimir Oltean
It looks like the P/Q/R/S series supports some more counters, generically named "Ethernet statistics counter", which we were not printing. Add them. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29s390/qeth: support net namespaces for L3 devicesJulian Wiedmann
Enable the L3 driver's IPv4 address notifier to watch for events on qeth devices that have been moved into a net namespace. We need to program those IPs into the HW just as usual, otherwise inbound traffic won't flow. Fixes: 6133fb1aa137 ("[NETNS]: Disable inetaddr notifiers in namespaces other than initial.") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29qed: Fix race condition between scheduling and destroying the slowpath workqueueYuval Basson
Calling queue_delayed_work concurrently with destroy_workqueue might race to an unexpected outcome - scheduled task after wq is destroyed or other resources (like ptt_pool) are freed (yields NULL pointer dereference). cancel_delayed_work prevents the race by cancelling the timer triggered for scheduling a new task. Fixes: 59ccf86fe ("qed: Add driver infrastucture for handling mfw requests") Signed-off-by: Denis Bolotin <dbolotin@marvell.com> Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: Yuval Basson <ybason@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29net: phy: micrel.c: add rgmii interface delay possibility to ksz9131Philippe Schenker
The KSZ9131 provides DLL controlled delays on RXC and TXC lines. This patch makes use of those delays. The information which delays should be enabled or disabled comes from the interface names, documented in ethernet-controller.yaml: rgmii: Disable RXC and TXC delays rgmii-id: Enable RXC and TXC delays rgmii-txid: Enable only TXC delay, disable RXC delay rgmii-rxid: Enable onlx RXC delay, disable TXC delay Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29net: macsec: add support for specifying offload upon link creationMark Starovoytov
This patch adds new netlink attribute to allow a user to (optionally) specify the desired offload mode immediately upon MACSec link creation. Separate iproute patch will be required to support this from user space. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor comment conflict in mac80211. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30crypto: caam - limit single JD RNG output to maximum of 16 bytesAndrey Smirnov
In order to follow recommendation in SP800-90C (section "9.4 The Oversampling-NRBG Construction") limit the output of "generate" JD submitted to CAAM. See https://lore.kernel.org/linux-crypto/VI1PR0402MB3485EF10976A4A69F90E5B0F98580@VI1PR0402MB3485.eurprd04.prod.outlook.com/ for more details. This change should make CAAM's hwrng driver good enough to have 1024 quality rating. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Horia Geantă <horia.geanta@nxp.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Iuliana Prodan <iuliana.prodan@nxp.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-imx@nxp.com Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-30crypto: caam - enable prediction resistance in HRWNGAndrey Smirnov
Instantiate CAAM RNG with prediction resistance enabled to improve its quality (with PR on DRNG is forced to reseed from TRNG every time random data is generated). Management Complex firmware with version lower than 10.20.0 doesn't provide prediction resistance support. Consider this and only instantiate rng when mc f/w version is lower. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Andrei Botila <andrei.botila@nxp.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Horia Geantă <horia.geanta@nxp.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Iuliana Prodan <iuliana.prodan@nxp.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-imx@nxp.com Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-30bus: fsl-mc: add api to retrieve mc versionAndrei Botila
Add a new api that returns Management Complex firmware version and make the required structure public. The api's first user will be the caam driver for setting prediction resistance bits. Signed-off-by: Andrei Botila <andrei.botila@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Horia Geantă <horia.geanta@nxp.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Iuliana Prodan <iuliana.prodan@nxp.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-imx@nxp.com Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-30crypto: caam - invalidate entropy register during RNG initializationAndrey Smirnov
In order to make sure that we always use non-stale entropy data, change the code to invalidate entropy register during RNG initialization. Signed-off-by: Aymen Sghaier <aymen.sghaier@nxp.com> Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com> [andrew.smirnov@gmail.com ported to upstream kernel, rewrote commit msg] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Horia Geantă <horia.geanta@nxp.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Iuliana Prodan <iuliana.prodan@nxp.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-imx@nxp.com Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-30crypto: caam - check if RNG job failedAndrey Smirnov
We shouldn't stay silent if RNG job fails. Add appropriate code to check for that case and propagate error code up appropriately. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Horia Geantă <horia.geanta@nxp.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Iuliana Prodan <iuliana.prodan@nxp.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-imx@nxp.com Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-30crypto: caam - simplify RNG implementationAndrey Smirnov
Rework CAAM RNG implementation as follows: - Make use of the fact that HWRNG supports partial reads and will handle such cases gracefully by removing recursion in caam_read() - Convert blocking caam_read() codepath to do a single blocking job read directly into requested buffer, bypassing any intermediary buffers - Convert async caam_read() codepath into a simple single reader/single writer FIFO use-case, thus simplifying concurrency handling and delegating buffer read/write position management to KFIFO subsystem. - Leverage the same low level RNG data extraction code for both async and blocking caam_read() scenarios, get rid of the shared job descriptor and make non-shared one as a simple as possible (just HEADER + ALGORITHM OPERATION + FIFO STORE) - Split private context from DMA related memory, so that the former could be allocated without GFP_DMA. NOTE: On its face value this commit decreased throughput numbers reported by dd if=/dev/hwrng of=/dev/null bs=1 count=100K [iflag=nonblock] by about 15%, however commits that enable prediction resistance and limit JR total size impact the performance so much and move the bottleneck such as to make this regression irrelevant. NOTE: On the bright side, this commit reduces RNG in kernel DMA buffer memory usage from 2 x RN_BUF_SIZE (~256K) to 32K. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Horia Geantă <horia.geanta@nxp.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Iuliana Prodan <iuliana.prodan@nxp.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-imx@nxp.com Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-30crypto: caam - drop global context pointer and init_doneAndrey Smirnov
Leverage devres to get rid of code storing global context as well as init_done flag. Original code also has a circular deallocation dependency where unregister_algs() -> caam_rng_exit() -> caam_jr_free() chain would only happen if all of JRs were freed. Fix this by moving caam_rng_exit() outside of unregister_algs() and doing it specifically for JR that instantiated HWRNG. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Horia Geantă <horia.geanta@nxp.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Iuliana Prodan <iuliana.prodan@nxp.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-imx@nxp.com Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-30crypto: caam - use struct hwrng's .init for initializationAndrey Smirnov
Make caamrng code a bit more symmetric by moving initialization code to .init hook of struct hwrng. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Horia Geantă <horia.geanta@nxp.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Iuliana Prodan <iuliana.prodan@nxp.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-imx@nxp.com Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-30crypto: caam - allocate RNG instantiation descriptor with GFP_DMAAndrey Smirnov
Be consistent with the rest of the codebase and use GFP_DMA when allocating memory for a CAAM JR descriptor. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Horia Geantă <horia.geanta@nxp.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Iuliana Prodan <iuliana.prodan@nxp.com> Cc: linux-imx@nxp.com Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-30crypto: ccree - remove duplicated include from cc_aead.cYueHaibing
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-29scsi: lpfc: Change default SCSI LUN QD to 64Dick Kennedy
The default lun queue depth by the driver has been 30 for many years. However, this value, when used with more recent hardware, has actually throttled some tests that concentrate io on a lun. Increase the default lun queue depth to 64. Queue full handling, reported by the target, remains in effect and unchanged. Link: https://lore.kernel.org/r/20200323161935.40341-1-jsmart2021@gmail.com Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: libfc: rport state move to PLOGI if all PRLI retry exhaustedJaved Hasan
After all PRLI retries are exhausted, move rport state machine back to PLOGI state. Link: https://lore.kernel.org/r/20200327060208.17104-3-skashyap@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: libfc: If PRLI rejected, move rport to PLOGI stateJaved Hasan
If PRLI reject code indicates "rejected status", move rport state machine back to PLOGI state. Link: https://lore.kernel.org/r/20200327060208.17104-2-skashyap@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-13 04:05:50 +0000