summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-03-29scsi: bnx2fc: Update the driver version to 2.12.13Saurav Kashyap
Update version to 2.12.13. Link: https://lore.kernel.org/r/20200327054849.15947-4-skashyap@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: bnx2fc: Fix SCSI command completion after cleanup is postedSaurav Kashyap
Driver received a SCSI completion after it posted the cleanup request. This leads to a problem that one ref count wasn't released leading to flush_active_ios to get struck. The callback from libfc never returned and other ports were not processed leading to APD. Decrease the refcnt as well as try to complete if something is waiting for completion. Link: https://lore.kernel.org/r/20200327054849.15947-3-skashyap@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: bnx2fc: Process the RQE with CQE in interrupt contextJaved Hasan
Filesystem goes to read-only after continuous error injection because RQE was handled in deferred context, leading to mismatch between CQE and RQE. Specifically, this patch makes the following changes: - Process the RQE with CQE in interrupt context, before putting it into the work queue. - Producer and consumer indices are also updated in the interrupt context to guarantee the the order of processing. [mkp: fixed bad indentation] Link: https://lore.kernel.org/r/20200327054849.15947-2-skashyap@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: target: use the stack for XCOPY passthrough cmdsDavid Disseldorp
Reads and writes in the XCOPY loop are synchronous, so needn't be heap allocated / freed with each loop. Link: https://lore.kernel.org/r/20200327141954.955-6-ddiss@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: target: increase XCOPY I/O sizeDavid Disseldorp
The I/O size is already bound by dev_attrib.hw_max_sectors, so increase the hardcoded XCOPY_MAX_SECTORS maximum to improve performance against backstores with high-latency. Link: https://lore.kernel.org/r/20200327141954.955-5-ddiss@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: target: avoid per-loop XCOPY buffer allocationsDavid Disseldorp
The main target_xcopy_do_work() loop unnecessarily allocates an I/O buffer with each synchronous READ / WRITE pair. This commit significantly reduces allocations by reusing the XCOPY I/O buffer when possible. Link: https://lore.kernel.org/r/20200327141954.955-4-ddiss@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: target: drop xcopy DISK BLOCK LENGTH debugDavid Disseldorp
The DISK BLOCK LENGTH field is carried with XCOPY target descriptors on the wire, but is currently unmarshalled during 0x02 segment descriptor passing. The unmarshalled value is currently unused, so drop it. Link: https://lore.kernel.org/r/20200327141954.955-3-ddiss@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: target: use #define for xcopy descriptor lenDavid Disseldorp
Link: https://lore.kernel.org/r/20200327141954.955-2-ddiss@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: ufs-mediatek: add error recovery for suspend and resumeStanley Chu
Once fail happens during suspend and resume flow if the desired low power link state is H8, link recovery is required for MediaTek UFS controller. For resume flow, since power and clocks are already enabled before invoking vendor's resume callback, simply using ufshcd_link_recovery() inside callback is fine. For suspend flow, the device power enters low power mode or is disabled before suspend callback, thus ufshcd_link_recovery() can not be directly used in vendor callback. One solution is to set the link to off state and then ufshcd_host_reset_and_restore() will be executed by ufshcd_suspend(). Link: https://lore.kernel.org/r/20200327095329.10083-3-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: ufs: export ufshcd_link_recoveryStanley Chu
Export ufshcd_link_recovery to allow vendors to recover failed link in vendor's callbacks. Link: https://lore.kernel.org/r/20200327095329.10083-2-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: ufs: Clean up ufshcd_scale_clks() and clock scaling error out pathSubhash Jadavani
This change introduces a func ufshcd_set_clk_freq() to explicitly set clock frequency so that it can be used in reset_and_restore path and in ufshcd_scale_clks(). This change also cleans up the clock scaling error out path. [mkp: commit desc] Link: https://lore.kernel.org/r/1585214742-5466-2-git-send-email-cang@codeaurora.org Fixes: a3cd5ec55f6c ("scsi: ufs: add load based scaling of UFS gear") Reviewed-by: Bean Huo <beanhuo@micron.com> Acked-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: lpfc: Update lpfc version to 12.8.0.0James Smart
Update lpfc version to 12.8.0.0 Link: https://lore.kernel.org/r/20200322181304.37655-13-jsmart2021@gmail.com Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: lpfc: Remove prototype FIPS/DSS options from SLI-3James Smart
During code review, identified dss feature that was a prototype only and was never productized in SLI3. They shouldn't be there and prevents reuse of the command areas. Remove any code in the driver to deal with dss, including code to deal with fips, which is associated with the dss feature. Link: https://lore.kernel.org/r/20200322181304.37655-12-jsmart2021@gmail.com Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: lpfc: Make debugfs ktime stats generic for NVME and SCSIJames Smart
Currently driver ktime stats, measuring code paths, is NVME-specific. Convert the stats routines such that the code paths are generic, providing status for NVME and SCSI. Added ktime stat calls in SCSI queuecommand and cmpl routines. Link: https://lore.kernel.org/r/20200322181304.37655-11-jsmart2021@gmail.com Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: lpfc: Fix erroneous cpu limit of 128 on I/O statisticsJames Smart
The cpu io statistics were capped by a hard define limit of 128. This effectively was a max number of CPUs, not an actual CPU count, nor actual CPU numbers which can be even larger than both of those values. This made stats off/misleading and on large CPU count systems, wrong. Fix the stats so that all CPUs can have a stats struct. Fix the looping such that it loops by hdwq, finds CPUs that used the hdwq, and sum the stats, then display. Link: https://lore.kernel.org/r/20200322181304.37655-9-jsmart2021@gmail.com Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29Merge tag 'irqchip-5.7' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier: - Second batch of the GICv4.1 support saga - Level triggered interrupt support for the stm32 controller - Versatile-fpga chained interrupt fixes - DT support for cascaded VIC interrupt controller - RPi irqchip initialization fixes - Multi-instance support for the Xilinx interrupt controller - Multi-instance support for the PLIC interrupt controller - CPU hotplug support for the PLIC interrupt controller - Ingenic X1000 TCU support - Small fixes all over the shop (GICv3, GICv4, Xilinx, Atmel, sa1111) - Cleanups (setup_irq removal, zero-length array removal)
2020-03-29rtc: imx-sc: Align imx sc msg structs to 4Leonard Crestez
The imx SC api strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs. This produces many oopses with CONFIG_KASAN=y. Fix by marking with __aligned(4). Fixes: a3094fc1a15e ("rtc: imx-sc: add rtc alarm support") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Link: https://lore.kernel.org/r/13404bac8360852d86c61fad5ae5f0c91ffc4cb6.1582216144.git.leonard.crestez@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-03-29rtc: fsl-ftm-alarm: report alarm to coreBiwen Li
Report interrupt state to the RTC core. Signed-off-by: Biwen Li <biwen.li@nxp.com> Link: https://lore.kernel.org/r/20200327084457.45161-1-biwen.li@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-03-29Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge vm fixes from Andrew Morton: "5 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/sparse: fix kernel crash with pfn_section_valid check mm: fork: fix kernel_stack memcg stats for various stack implementations hugetlb_cgroup: fix illegal access to memory drivers/base/memory.c: indicate all memory blocks as removable mm/swapfile.c: move inode_lock out of claim_swapfile
2020-03-29Merge tag 'timers-urgent-2020-03-29' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single fix for the Hyper-V clocksource driver to make sched clock actually return nanoseconds and not the virtual clock value which increments at 10e7 HZ (100ns)" * tag 'timers-urgent-2020-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/hyper-v: Make sched clock return nanoseconds correctly
2020-03-29drivers/base/memory.c: indicate all memory blocks as removableDavid Hildenbrand
We see multiple issues with the implementation/interface to compute whether a memory block can be offlined (exposed via /sys/devices/system/memory/memoryX/removable) and would like to simplify it (remove the implementation). 1. It runs basically lockless. While this might be good for performance, we see possible races with memory offlining that will require at least some sort of locking to fix. 2. Nowadays, more false positives are possible. No arch-specific checks are performed that validate if memory offlining will not be denied right away (and such check will require locking). For example, arm64 won't allow to offline any memory block that was added during boot - which will imply a very high error rate. Other archs have other constraints. 3. The interface is inherently racy. E.g., if a memory block is detected to be removable (and was not a false positive at that time), there is still no guarantee that offlining will actually succeed. So any caller already has to deal with false positives. 4. It is unclear which performance benefit this interface actually provides. The introducing commit 5c755e9fd813 ("memory-hotplug: add sysfs removable attribute for hotplug memory remove") mentioned "A user-level agent must be able to identify which sections of memory are likely to be removable before attempting the potentially expensive operation." However, no actual performance comparison was included. Known users: - lsmem: Will group memory blocks based on the "removable" property. [1] - chmem: Indirect user. It has a RANGE mode where one can specify removable ranges identified via lsmem to be offlined. However, it also has a "SIZE" mode, which allows a sysadmin to skip the manual "identify removable blocks" step. [2] - powerpc-utils: Uses the "removable" attribute to skip some memory blocks right away when trying to find some to offline+remove. However, with ballooning enabled, it already skips this information completely (because it once resulted in many false negatives). Therefore, the implementation can deal with false positives properly already. [3] According to Nathan Fontenot, DLPAR on powerpc is nowadays no longer driven from userspace via the drmgr command (powerpc-utils). Nowadays it's managed in the kernel - including onlining/offlining of memory blocks - triggered by drmgr writing to /sys/kernel/dlpar. So the affected legacy userspace handling is only active on old kernels. Only very old versions of drmgr on a new kernel (unlikely) might execute slower - totally acceptable. With CONFIG_MEMORY_HOTREMOVE, always indicating "removable" should not break any user space tool. We implement a very bad heuristic now. Without CONFIG_MEMORY_HOTREMOVE we cannot offline anything, so report "not removable" as before. Original discussion can be found in [4] ("[PATCH RFC v1] mm: is_mem_section_removable() overhaul"). Other users of is_mem_section_removable() will be removed next, so that we can remove is_mem_section_removable() completely. [1] http://man7.org/linux/man-pages/man1/lsmem.1.html [2] http://man7.org/linux/man-pages/man8/chmem.8.html [3] https://github.com/ibm-power-utilities/powerpc-utils [4] https://lkml.kernel.org/r/20200117105759.27905-1-david@redhat.com Also, this patch probably fixes a crash reported by Steve. http://lkml.kernel.org/r/CAPcyv4jpdaNvJ67SkjyUJLBnBnXXQv686BiVW042g03FUmWLXw@mail.gmail.com Reported-by: "Scargall, Steve" <steve.scargall@intel.com> Suggested-by: Michal Hocko <mhocko@kernel.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Nathan Fontenot <ndfont@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Karel Zak <kzak@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200128093542.6908-1-david@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-29IB/qib: Delete struct qib_ivdev.qp_rndGeorge Spelvin
I was checking the field to see if it needed the full get_random_bytes() and discovered it's unused. Only compile-tested, as I don't have the hardware, but I'm still pretty confident. Link: https://lore.kernel.org/r/202003281643.02SGh6eG002694@sdf.org Signed-off-by: George Spelvin <lkml@sdf.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-29RDMA/hns: Fix uninitialized variable bugGustavo A. R. Silva
There is a potential execution path in which variable *ret* is returned without being properly initialized, previously. Fix this by initializing variable *ret* to 0. Link: https://lore.kernel.org/r/20200328023539.GA32016@embeddedor Addresses-Coverity-ID: 1491917 ("Uninitialized scalar variable") Fixes: 2f49de21f3e9 ("RDMA/hns: Optimize mhop get flow for multi-hop addressing") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-29RDMA/hns: Modify the mask of QP number for CQE of hip08Lang Cheng
The hip08 supports up to 1M QPs, so the qpn mask of cqe should be modified. Link: https://lore.kernel.org/r/1585194018-4381-4-git-send-email-liweihang@huawei.com Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-29RDMA/hns: Reduce the maximum number of extend SGE per WQELang Cheng
Just reduce the default number to 64 for backward compatibility, the driver can still get this configuration from the firmware. Link: https://lore.kernel.org/r/1585194018-4381-3-git-send-email-liweihang@huawei.com Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-29RDMA/hns: Reduce PFC frames in congestion scenariosJihua Tao
The original value means sending 16 packets at a time, and it should be configured to 0 which means sending 1 packet instead. It is modified to reduce the number of PFC frames to make sure the performance meets expectations when flow control is enabled on hip08. Link: https://lore.kernel.org/r/1585194018-4381-2-git-send-email-liweihang@huawei.com Signed-off-by: Jihua Tao <taojihua4@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-29net: wan: wanxl: refactor the firmware rebuild ruleMasahiro Yamada
Split the big recipe into 3 stages: compile, link, and hexdump. After this commit, the build log with CONFIG_WANXL_BUILD_FIRMWARE will look like this: M68KAS drivers/net/wan/wanxlfw.o M68KLD drivers/net/wan/wanxlfw.bin BLDFW drivers/net/wan/wanxlfw.inc CC [M] drivers/net/wan/wanxl.o Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-29net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) for rebuilding firmwareMasahiro Yamada
The firmware source, wanxlfw.S, is currently compiled by the combo of $(CPP) and $(M68KAS). This is not what we usually do for compiling *.S files. In fact, this Makefile is the only user of $(AS) in the kernel build. Instead of combining $(CPP) and (AS) from different tool sets, using $(M68KCC) as an assembler driver is simpler, and saner. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-29net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmwareMasahiro Yamada
As far as I understood from the Kconfig help text, this build rule is used to rebuild the driver firmware, which runs on an old m68k-based chip. So, you need m68k tools for the firmware rebuild. wanxl.c is a PCI driver, but CONFIG_M68K does not select CONFIG_HAVE_PCI. So, you cannot enable CONFIG_WANXL_BUILD_FIRMWARE for ARCH=m68k. In other words, ifeq ($(ARCH),m68k) is false here. I am keeping the dead code for now, but rebuilding the firmware requires 'as68k' and 'ld68k', which I do not have in hand. Instead, the kernel.org m68k GCC [1] successfully built it. Allowing a user to pass in CROSS_COMPILE_M68K= is handier. [1] https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-m68k-linux.tar.xz Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-29efi/libstub/arm: Fix spurious message that an initrd was loadedArd Biesheuvel
Commit: ec93fc371f014a6f ("efi/libstub: Add support for loading the initrd from a device path") added a diagnostic print to the ARM version of the EFI stub that reports whether an initrd has been loaded that was passed via the command line using initrd=. However, it failed to take into account that, for historical reasons, the file loading routines return EFI_SUCCESS when no file was found, and the only way to decide whether a file was loaded is to inspect the 'size' argument that is passed by reference. So let's inspect this returned size, to prevent the print from being emitted even if no initrd was loaded at all. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-efi@vger.kernel.org
2020-03-29efi/libstub/arm64: Avoid image_base value from efi_loaded_imageArd Biesheuvel
Commit: 9f9223778ef3 ("efi/libstub/arm: Make efi_entry() an ordinary PE/COFF entrypoint") did some code refactoring to get rid of the EFI entry point assembler code, and in the process, it got rid of the assignment of image_addr to the value of _text. Instead, it switched to using the image_base field of the efi_loaded_image struct provided by UEFI, which should contain the same value. However, Michael reports that this is not the case: older GRUB builds corrupt this value in some way, and since we can easily switch back to referring to _text to discover this value, let's simply do that. While at it, fix another issue in commit 9f9223778ef3, which may result in the unassigned image_addr to be misidentified as the preferred load offset of the kernel, which is unlikely but will cause a boot crash if it does occur. Finally, let's add a warning if the _text vs. image_base discrepancy is detected, so we can tell more easily how widespread this issue actually is. Reported-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-efi@vger.kernel.org
2020-03-29i3c: convert to use i2c_new_client_device()Wolfram Sang
Move away from the deprecated API. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-i3c/20200326211002.13241-2-wsa+renesas@sang-engineering.com
2020-03-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix memory leak in vti6, from Torsten Hilbrich. 2) Fix double free in xfrm_policy_timer, from YueHaibing. 3) NL80211_ATTR_CHANNEL_WIDTH attribute is put with wrong type, from Johannes Berg. 4) Wrong allocation failure check in qlcnic driver, from Xu Wang. 5) Get ks8851-ml IO operations right, for real this time, from Marek Vasut. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (22 commits) r8169: fix PHY driver check on platforms w/o module softdeps net: ks8851-ml: Fix IO operations, again mlxsw: spectrum_mr: Fix list iteration in error path qlcnic: Fix bad kzalloc null test mac80211: set IEEE80211_TX_CTRL_PORT_CTRL_PROTO for nl80211 TX mac80211: mark station unauthorized before key removal mac80211: Check port authorization in the ieee80211_tx_dequeue() case cfg80211: Do not warn on same channel at the end of CSA mac80211: drop data frames without key on encrypted links ieee80211: fix HE SPR size calculation nl80211: fix NL80211_ATTR_CHANNEL_WIDTH attribute type xfrm: policy: Fix doulbe free in xfrm_policy_timer bpf: Explicitly memset some bpf info structures declared on the stack bpf: Explicitly memset the bpf_attr structure bpf: Sanitize the bpf_struct_ops tcp-cc name vti6: Fix memory leak of skb if input policy check fails esp: remove the skb from the chain when it's enqueued in cryptd_wq ipv6: xfrm6_tunnel.c: Use built-in RCU list checking xfrm: add the missing verify_sec_ctx_len check in xfrm_add_acquire xfrm: fix uctx len check in verify_sec_ctx_len ...
2020-03-28PCI: Add ACS quirk for Zhaoxin Root/Downstream PortsRaymond Pang
Many Zhaoxin Root Ports and Switch Downstream Ports do provide ACS-like capability but have no ACS Capability Structure. Peer-to-Peer transactions could be blocked between these ports, so add quirk so devices behind them could be assigned to different IOMMU group. Link: https://lore.kernel.org/r/20200327091148.5190-4-RaymondPang-oc@zhaoxin.com Signed-off-by: Raymond Pang <RaymondPang-oc@zhaoxin.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI: Add ACS quirk for Zhaoxin multi-function devicesRaymond Pang
Some Zhaoxin endpoints are implemented as multi-function devices without an ACS capability, but they actually don't support peer-to-peer transactions. Add ACS quirks to declare DMA isolation. Link: https://lore.kernel.org/r/20200327091148.5190-3-RaymondPang-oc@zhaoxin.com Signed-off-by: Raymond Pang <RaymondPang-oc@zhaoxin.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28iio: cros_ec: Report hwfifo_watermark_maxGwendal Grignou
Report the maximum amount of sample the EC can hold. This is not tunable, but can be useful for application to find out the maximum amount of time it can sleep when hwfifo_timeout is set to a large number. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-03-28iio: cros_ec: Expose hwfifo_timeoutGwendal Grignou
Expose EC minimal interrupt period through buffer/hwfifo_timeout: - Maximal timeout is limited to 65s. - When timeout for all sensors is set to 0, EC will not send events, even if the sensor sampling rate is greater than 0. Rename frequency to sampling_frequency to match IIO ABI. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-03-28iio: cros_ec: Remove pm functionGwendal Grignou
Since cros_ec_sensorhub is shutting down the FIFO when the device suspends, no need to slow down the EC sampling period rate. It was necesseary to do that before command CMD_FIFO_INT_ENABLE was introduced, but now all supported chromebooks have it. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-03-28iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFOGwendal Grignou
When EC supports FIFO, each IIO device registers a callback, to put samples in the buffer when they arrives from the FIFO. When no FIFO, the user space app needs to call trigger_new, or better register a high precision timer. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-03-28iio: expose iio_device_set_clockGwendal Grignou
Some IIO devices may want to override the default (realtime) to another clock source by default. It can beneficial when timestamps coming from the hardware or underlying drivers are already in that format. It can always be overridden by attribute current_timestamp_clock. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-03-28iio: cros_ec: Move function description to .c fileGwendal Grignou
To prevent comment rot, move function description to cros_ec_sensors_core.c. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-03-28platform/chrome: cros_ec_sensorhub: Add median filterGwendal Grignou
Events are timestamped in EC time space, their timestamps need to be converted in host time space. The assumption is the time delta between when the interrupt is sent by the EC and when it is receive by the host is a [small] constant. This is not always true, even with hard-wired interrupt. To mitigate worst offenders, add a median filter to weed out bigger than expected delays. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-03-28platform/chrome: cros_ec_sensorhub: Add code to spread timestmapGwendal Grignou
EC FIFO can send sensor events in batch. Spread them based on previous (TSa) and currnet timestamp (TSb) EC FIFO iio events +-----------+ | TSa | +-----------+ +---------------------------------------+ | event 1 | | event 1 | TSb - (TSb - TSa)/n * (n-1) | +-----------+ +---------------------------------------+ | event 2 | | event 2 | TSb - (TSb - TSa)/n * (n-2) | +-----------+ +---------------------------------------+ | ... | ------> | .... | | +-----------+ +---------------------------------------+ | event n-1 | | event 2 | TSb - (TSb - TSa)/n | +-----------+ +---------------------------------------+ | event n | | event 2 | TSb | +-----------+ +---------------------------------------+ | TSb | +-----------+ Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-03-28platform/chrome: cros_ec_sensorhub: Add FIFO supportGwendal Grignou
cros_ec_sensorhub registers a listener and query motion sense FIFO, spread to iio sensors registers. To test, we can use libiio: iiod& iio_readdev -u ip:localhost -T 10000 -s 25 -b 16 cros-ec-gyro | od -x Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-03-28platform/chrome: cros_ec_sensorhub: Add the number of sensors in sensorhubGwendal Grignou
To better manage resources, store the number of sensors reported by the EC. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-03-28platform/x86: surface3_power: Fix Kconfig section orderingAndy Shevchenko
Kconfig section is misplaced. Put it in the same order as it is done in Makefile for this driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-03-28platform/x86: surface3_power: Add missed headersAndy Shevchenko
We obviously are users of bits.h and types.h. Add them to the list. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-03-28platform/x86: surface3_power: Reformat GUID assignmentAndy Shevchenko
For better readability reformat GUID assignment. While here, add the comment how this GUID looks in a string representation. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-03-28platform/x86: surface3_power: Drop useless macro ACPI_PTR()Andy Shevchenko
Driver depends to ACPI, this marco always is evaluated to the parameter, thus useless. Drop it for good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-03-28platform/x86: surface3_power: Prefix POLL_INTERVAL with SURFACE_3Andy Shevchenko
For better namespace maintenance prefix POLL_INTERVAL macro with SURFACE_3. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-13 08:30:14 +0000