summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-06-12net: drv: netdevsim: don't napi_complete() from netpollJakub Kicinski
netdevsim supports netpoll. Make sure we don't call napi_complete() from it, since it may not be scheduled. Breno reports hitting a warning in napi_complete_done(): WARNING: CPU: 14 PID: 104 at net/core/dev.c:6592 napi_complete_done+0x2cc/0x560 __napi_poll+0x2d8/0x3a0 handle_softirqs+0x1fe/0x710 This is presumably after netpoll stole the SCHED bit prematurely. Reported-by: Breno Leitao <leitao@debian.org> Fixes: 3762ec05a9fb ("netdevsim: add NAPI support") Tested-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250611174643.2769263-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get()Dan Carpenter
Check for if ida_alloc() or rhashtable_lookup_get_insert_fast() fails. Fixes: 17e0accac577 ("net/mlx5: HWS, support complex matchers") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Link: https://patch.msgid.link/aEmBONjyiF6z5yCV@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12veth: prevent NULL pointer dereference in veth_xdp_rcvJesper Dangaard Brouer
The veth peer device is RCU protected, but when the peer device gets deleted (veth_dellink) then the pointer is assigned NULL (via RCU_INIT_POINTER). This patch adds a necessary NULL check in veth_xdp_rcv when accessing the veth peer net_device. This fixes a bug introduced in commit dc82a33297fc ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops"). The bug is a race and only triggers when having inflight packets on a veth that is being deleted. Reported-by: Ihor Solodrai <ihor.solodrai@linux.dev> Closes: https://lore.kernel.org/all/fecfcad0-7a16-42b8-bff2-66ee83a6e5c4@linux.dev/ Reported-by: syzbot+c4c7bf27f6b0c4bd97fe@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/683da55e.a00a0220.d8eae.0052.GAE@google.com/ Fixes: dc82a33297fc ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops") Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org> Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev> Link: https://patch.msgid.link/174964557873.519608.10855046105237280978.stgit@firesoul Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12net: phy: phy_caps: Don't skip better duplex macth on non-exact matchMaxime Chevallier
When performing a non-exact phy_caps lookup, we are looking for a supported mode that matches as closely as possible the passed speed/duplex. Blamed patch broke that logic by returning a match too early in case the caller asks for half-duplex, as a full-duplex linkmode may match first, and returned as a non-exact match without even trying to mach on half-duplex modes. Reported-by: Jijie Shao <shaojijie@huawei.com> Closes: https://lore.kernel.org/netdev/20250603102500.4ec743cf@fedora/T/#m22ed60ca635c67dc7d9cbb47e8995b2beb5c1576 Tested-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Fixes: fc81e257d19f ("net: phy: phy_caps: Allow looking-up link caps based on speed and duplex") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250606094321.483602-1-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12drm/arm/malidp: Silence informational messageAlexander Stein
When checking for unsupported expect an error is printed every time. This spams the log for platforms where this is expected, e.g. ls1028a having a Vivante (etnaviv) GPU and Mali display processor. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://lore.kernel.org/r/20250523064042.3275926-1-alexander.stein@ew.tq-group.com
2025-06-12drm/ssd130x: fix ssd132x_clear_screen() columnsJohn Keeping
The number of columns relates to the width, not the height. Use the correct variable. Signed-off-by: John Keeping <jkeeping@inmusicbrands.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Fixes: fdd591e00a9c ("drm/ssd130x: Add support for the SSD132x OLED controller family") Link: https://lore.kernel.org/r/20250611111307.1814876-1-jkeeping@inmusicbrands.com Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
2025-06-12platform/x86/intel-uncore-freq: avoid non-literal format stringArnd Bergmann
Using a string variable in place of a format string causes a W=1 build warning: drivers/platform/x86/intel/uncore-frequency/uncore-frequency-common.c:61:40: error: format string is not a string literal (potentially insecure) [-Werror,-Wformat-security] 61 | length += sysfs_emit_at(buf, length, agent_name[agent]); | ^~~~~~~~~~~~~~~~~ Use the safer "%s" format string to print it instead. Fixes: b98fa870fce2 ("platform/x86/intel-uncore-freq: Add attributes to show agent types") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20250610093459.2646337-1-arnd@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-12platform/x86/intel/pmc: Add Panther Lake support to Intel PMC SSRAM TelemetryXi Pardee
Add Panther Lake support to Intel PMC SSRAM Telemetry driver. Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com> Link: https://lore.kernel.org/r/20250610230416.622970-2-xi.pardee@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-12platform/x86/intel/pmc: Add Lunar Lake support to Intel PMC SSRAM TelemetryXi Pardee
Add Lunar Lake support to Intel PMC SSRAM Telemetry driver. Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com> Link: https://lore.kernel.org/r/20250610230416.622970-1-xi.pardee@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-12i2c: use inclusive callbacks in struct i2c_algorithmWolfram Sang
Convert the I2C subsystem to drop using the 'master_'-prefixed callbacks in favor of the simplified ones. Fix alignment of '=' while here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2025-06-11drivers/rapidio/rio_cm.c: prevent possible heap overwriteAndrew Morton
In riocm_cdev_ioctl(RIO_CM_CHAN_SEND) -> cm_chan_msg_send() -> riocm_ch_send() cm_chan_msg_send() checks that userspace didn't send too much data but riocm_ch_send() failed to check that userspace sent sufficient data. The result is that riocm_ch_send() can write to fields in the rio_ch_chan_hdr which were outside the bounds of the space which cm_chan_msg_send() allocated. Address this by teaching riocm_ch_send() to check that the entire rio_ch_chan_hdr was copied in from userspace. Reported-by: maher azz <maherazz04@gmail.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Alexandre Bounine <alex.bou9@gmail.com> Cc: Linus Torvalds <torvalds@linuxfoundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-06-12rust: Use CpuId in place of raw CPU numbersViresh Kumar
Use the newly defined `CpuId` abstraction instead of raw CPU numbers. This also fixes a doctest failure for configurations where `nr_cpu_ids < 4`. The C `cpumask_{set|clear}_cpu()` APIs emit a warning when given an invalid CPU number — but only if `CONFIG_DEBUG_PER_CPU_MAPS=y` is set. Meanwhile, `cpumask_weight()` only considers CPUs up to `nr_cpu_ids`, which can cause inconsistencies: a CPU number greater than `nr_cpu_ids` may be set in the mask, yet the weight calculation won't reflect it. This leads to doctest failures when `nr_cpu_ids < 4`, as the test tries to set CPUs 2 and 3: rust_doctest_kernel_cpumask_rs_0.location: rust/kernel/cpumask.rs:180 rust_doctest_kernel_cpumask_rs_0: ASSERTION FAILED at rust/kernel/cpumask.rs:190 Fixes: 8961b8cb3099 ("rust: cpumask: Add initial abstractions") Reported-by: Miguel Ojeda <ojeda@kernel.org> Closes: https://lore.kernel.org/rust-for-linux/CANiq72k3ozKkLMinTLQwvkyg9K=BeRxs1oYZSKhJHY-veEyZdg@mail.gmail.com/ Reported-by: Andreas Hindborg <a.hindborg@kernel.org> Closes: https://lore.kernel.org/all/87qzzy3ric.fsf@kernel.org/ Suggested-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
2025-06-11net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_operShahar Shitrit
When the link is up, either eth_proto_oper or ext_eth_proto_oper typically reports the active link protocol, from which both speed and number of lanes can be retrieved. However, in certain cases, such as when a NIC is connected via a non-standard cable, the firmware may not report the protocol. In such scenarios, the speed can still be obtained from the data_rate_oper field in PTYS register. Since data_rate_oper provides only speed information and lacks lane details, it is incorrect to derive the number of lanes from it. This patch corrects the behavior by setting the number of lanes to UNKNOWN instead of incorrectly using MAX_LANES when relying on data_rate_oper. Fixes: 7e959797f021 ("net/mlx5e: Enable lanes configuration when auto-negotiation is off") Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250610151514.1094735-10-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11net/mlx5e: Fix leak of Geneve TLV option objectJianbo Liu
Previously, a unique tunnel id was added for the matching on TC non-zero chains, to support inner header rewrite with goto action. Later, it was used to support VF tunnel offload for vxlan, then for Geneve and GRE. To support VF tunnel, a temporary mlx5_flow_spec is used to parse tunnel options. For Geneve, if there is TLV option, a object is created, or refcnt is added if already exists. But the temporary mlx5_flow_spec is directly freed after parsing, which causes the leak because no information regarding the object is saved in flow's mlx5_flow_spec, which is used to free the object when deleting the flow. To fix the leak, call mlx5_geneve_tlv_option_del() before free the temporary spec if it has TLV object. Fixes: 521933cdc4aa ("net/mlx5e: Support Geneve and GRE with VF tunnel offload") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Alex Lazar <alazar@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250610151514.1094735-9-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11net/mlx5: HWS, make sure the uplink is the last destinationVlad Dogaru
When there are more than one destinations, we create a FW flow table and provide it with all the destinations. FW requires to have wire as the last destination in the list (if it exists), otherwise the operation fails with FW syndrome. This patch fixes the destination array action creation: if it contains a wire destination, it is moved to the end. Fixes: 504e536d9010 ("net/mlx5: HWS, added actions handling") Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250610151514.1094735-7-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11net/mlx5: HWS, fix missing ip_version handling in definerYevgeny Kliteynik
Fix missing field handling in definer - outer IP version. Fixes: 74a778b4a63f ("net/mlx5: HWS, added definers handling") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250610151514.1094735-6-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11net/mlx5: HWS, Init mutex on the correct pathVlad Dogaru
The newly introduced mutex is only used for reformat actions, but it was initialized for modify header instead. The struct that contains the mutex is zero-initialized and an all-zero mutex is valid, so the issue only shows up with CONFIG_DEBUG_MUTEXES. Fixes: b206d9ec19df ("net/mlx5: HWS, register reformat actions with fw") Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250610151514.1094735-5-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11net/mlx5: Fix return value when searching for existing flow groupPatrisious Haddad
When attempting to add a rule to an existing flow group, if a matching flow group exists but is not active, the error code returned should be EAGAIN, so that the rule can be added to the matching flow group once it is active, rather than ENOENT, which indicates that no matching flow group was found. Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by: Gavi Teitz <gavi@nvidia.com> Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250610151514.1094735-4-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11net/mlx5: Fix ECVF vports unload on shutdown flowAmir Tzin
Fix shutdown flow UAF when a virtual function is created on the embedded chip (ECVF) of a BlueField device. In such case the vport acl ingress table is not properly destroyed. ECVF functionality is independent of ecpf_vport_exists capability and thus functions mlx5_eswitch_(enable|disable)_pf_vf_vports() should not test it when enabling/disabling ECVF vports. kernel log: [] refcount_t: underflow; use-after-free. [] WARNING: CPU: 3 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0x124/0x220 ---------------- [] Call trace: [] refcount_warn_saturate+0x124/0x220 [] tree_put_node+0x164/0x1e0 [mlx5_core] [] mlx5_destroy_flow_table+0x98/0x2c0 [mlx5_core] [] esw_acl_ingress_table_destroy+0x28/0x40 [mlx5_core] [] esw_acl_ingress_lgcy_cleanup+0x80/0xf4 [mlx5_core] [] esw_legacy_vport_acl_cleanup+0x44/0x60 [mlx5_core] [] esw_vport_cleanup+0x64/0x90 [mlx5_core] [] mlx5_esw_vport_disable+0xc0/0x1d0 [mlx5_core] [] mlx5_eswitch_unload_ec_vf_vports+0xcc/0x150 [mlx5_core] [] mlx5_eswitch_disable_sriov+0x198/0x2a0 [mlx5_core] [] mlx5_device_disable_sriov+0xb8/0x1e0 [mlx5_core] [] mlx5_sriov_detach+0x40/0x50 [mlx5_core] [] mlx5_unload+0x40/0xc4 [mlx5_core] [] mlx5_unload_one_devl_locked+0x6c/0xe4 [mlx5_core] [] mlx5_unload_one+0x3c/0x60 [mlx5_core] [] shutdown+0x7c/0xa4 [mlx5_core] [] pci_device_shutdown+0x3c/0xa0 [] device_shutdown+0x170/0x340 [] __do_sys_reboot+0x1f4/0x2a0 [] __arm64_sys_reboot+0x2c/0x40 [] invoke_syscall+0x78/0x100 [] el0_svc_common.constprop.0+0x54/0x184 [] do_el0_svc+0x30/0xac [] el0_svc+0x48/0x160 [] el0t_64_sync_handler+0xa4/0x12c [] el0t_64_sync+0x1a4/0x1a8 [] --[ end trace 9c4601d68c70030e ]--- Fixes: a7719b29a821 ("net/mlx5: Add management of EC VF vports") Reviewed-by: Daniel Jurgens <danielj@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Amir Tzin <amirtz@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250610151514.1094735-3-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11net/mlx5: Ensure fw pages are always allocated on same NUMAMoshe Shemesh
When firmware asks the driver to allocate more pages, using event of give_pages, the driver should always allocate it from same NUMA, the original device NUMA. Current code uses dev_to_node() which can result in different NUMA as it is changed by other driver flows, such as mlx5_dma_zalloc_coherent_node(). Instead, use saved numa node for allocating firmware pages. Fixes: 311c7c71c9bb ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250610151514.1094735-2-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2025-06-10 (i40e, iavf, ice, e1000) For i40e: Robert Malz improves reset handling for situations where multiple reset requests could cause some to be missed. For iavf: Ahmed adds detection, and handling, of reset that could occur early in the initialization process to stop long wait/hangs. For ice: Anton, properly, sets missed use_nsecs value. For e1000: Joe Damato moves cancel_work_sync() call to avoid deadlock. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000: Move cancel_work_sync to avoid deadlock ice/ptp: fix crosstimestamp reporting iavf: fix reset_task for early reset event i40e: retry VFLR handling if there is ongoing VF reset i40e: return false from i40e_reset_vf if reset is in progress ==================== Link: https://patch.msgid.link/20250610171348.1476574-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11spi: stm32-ospi: clean up on error in probe()Dan Carpenter
If reset_control_acquire() fails, then we can't return directly. We need to do a little clean up first. Fixes: cf2c3eceb757 ("spi: stm32-ospi: Make usage of reset_control_acquire/release() API") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/aEmAGTUzzKZlLe3K@stanley.mountain Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-11loop: move lo_set_size() out of queue freezeMing Lei
It isn't necessary to freeze queue for updating disk size given submit_bio() doesn't grab queue usage counter for checking eod. Also many driver won't freeze queue for calling set_capacity_and_notify(). Move lo_set_size() out of queue freeze for fixing many lockdep warning report. Link: https://lore.kernel.org/linux-block/67ea99e0.050a0220.3c3d88.0042.GAE@google.com/ Reported-by: syzbot+9dd7dbb1a4b915dee638@syzkaller.appspotmail.com Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250611084938.108829-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-11gpio: loongson-64bit: Correct Loongson-7A2000 ACPI GPIO access modeBinbin Zhou
According to the description of the Loongson-7A2000 ACPI GPIO register in the manual, its access mode should be BIT_CTRL_MODE, otherwise there maybe some unpredictable behavior. Cc: stable@vger.kernel.org Fixes: 44fe79020b91 ("gpio: loongson-64bit: Add more gpio chip support") Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://lore.kernel.org/r/20250610115926.347845-1-zhoubinbin@loongson.cn Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-06-11net/mdiobus: Fix potential out-of-bounds clause 45 read/write accessJakub Raczynski
When using publicly available tools like 'mdio-tools' to read/write data from/to network interface and its PHY via C45 (clause 45) mdiobus, there is no verification of parameters passed to the ioctl and it accepts any mdio address. Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define, but it is possible to pass higher value than that via ioctl. While read/write operation should generally fail in this case, mdiobus provides stats array, where wrong address may allow out-of-bounds read/write. Fix that by adding address verification before C45 read/write operation. While this excludes this access from any statistics, it improves security of read/write operation. Fixes: 4e4aafcddbbf ("net: mdio: Add dedicated C45 API to MDIO bus drivers") Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com> Reported-by: Wenjing Shan <wenjing.shan@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-06-11net/mdiobus: Fix potential out-of-bounds read/write accessJakub Raczynski
When using publicly available tools like 'mdio-tools' to read/write data from/to network interface and its PHY via mdiobus, there is no verification of parameters passed to the ioctl and it accepts any mdio address. Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define, but it is possible to pass higher value than that via ioctl. While read/write operation should generally fail in this case, mdiobus provides stats array, where wrong address may allow out-of-bounds read/write. Fix that by adding address verification before read/write operation. While this excludes this access from any statistics, it improves security of read/write operation. Fixes: 080bb352fad00 ("net: phy: Maintain MDIO device and bus statistics") Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com> Reported-by: Wenjing Shan <wenjing.shan@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-06-11regulator: rpi-panel-v2: Fix missing OF dependencyMarek Vasut
Add missing OF dependency and drop of_match_ptr() use. This fixes the following LKP report: " >> drivers/regulator/rpi-panel-v2-regulator.c:95:34: warning: 'rpi_panel_v2_dt_ids' defined but not used [-Wunused-const-variable=] static const struct of_device_id rpi_panel_v2_dt_ids[] = { ^~~~~~~~~~~~~~~~~~~ " Fixes: d49305862fdc ("regulator: rpi-panel-v2: Add regulator for 7" Raspberry Pi 720x1280") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202506100440.fyTGO7CG-lkp@intel.com/ Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Link: https://patch.msgid.link/20250609223012.87764-1-marek.vasut+renesas@mailbox.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-11regulator: bd718x7: Clarify comment by moving itMatti Vaittinen
The BD718x7 needs to disable voltage monitoring for a duration of certain voltage changes. The comment explaining use of msleep(1) instead of a more accurate delay(), was placed to a function which disabled the protection. The actual sleeping is done in a different place of the code, after the voltage has been changed. Browsing through the comment and code after the years made me to scratch my head for a second. I may have figured why me and so many fellow developers are slowly getting bald. Clarify things a bit and move the comment about required delay directly above the sleep. Leave only a small comment explaining why the protection is disabled to the spot where the logic for disabling is. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://patch.msgid.link/a90cb77e66a253f4055bbb99672dc81c7457de66.1749533040.git.mazziesaccount@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-11udmabuf: use sgtable-based scatterlist wrappersMarek Szyprowski
Use common wrappers operating directly on the struct sg_table objects to fix incorrect use of scatterlists sync calls. dma_sync_sg_for_*() functions have to be called with the number of elements originally passed to dma_map_sg_*() function, not the one returned in sgtable's nents. Fixes: 1ffe09590121 ("udmabuf: fix dma-buf cpu access") CC: stable@vger.kernel.org Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20250507160913.2084079-3-m.szyprowski@samsung.com
2025-06-11ata: ahci: Use correct BIOS build date for ThinkPad W541 quirkNiklas Cassel
Fix the TODO in ahci_broken_lpm() by using the proper BIOS build date. The proper BIOS build date was provided by Hans, see Link. Link: https://lore.kernel.org/linux-ide/6ea509c8-b38d-4941-8a29-c1117ff3dd5b@redhat.com/ Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250610110757.1318959-6-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org>
2025-06-11ata: pata_macio: Fix PCI region leakPhilipp Stanner
pci_request_regions() became a managed devres functions if the PCI device was enabled with pcim_enable_device(), which is the case for pata_macio. The PCI subsystem recently removed this hybrid feature from pci_request_region(). When doing so, pata_macio was forgotten to be ported to use pcim_request_all_regions(). If that function is not used, pata_macio will fail on driver-reload because the PCI regions will remain blocked. Fix the region leak by replacing pci_request_regions() with its managed counterpart, pcim_request_all_regions(). Fixes: 51f6aec99cb0 ("PCI: Remove hybrid devres nature from request functions") Signed-off-by: Philipp Stanner <phasta@kernel.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250610135413.35930-2-phasta@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org>
2025-06-11dma-buf: fix compare in WARN_ON_ONCEChristian König
Smatch pointed out this trivial typo: drivers/dma-buf/dma-buf.c:1123 dma_buf_map_attachment() warn: passing positive error code '16' to 'ERR_PTR' drivers/dma-buf/dma-buf.c 1113 dma_resv_assert_held(attach->dmabuf->resv); 1114 1115 if (dma_buf_pin_on_map(attach)) { 1116 ret = attach->dmabuf->ops->pin(attach); 1117 /* 1118 * Catch exporters making buffers inaccessible even when 1119 * attachments preventing that exist. 1120 */ 1121 WARN_ON_ONCE(ret == EBUSY); ^^^^^ This was probably intended to be -EBUSY? 1122 if (ret) --> 1123 return ERR_PTR(ret); ^^^ Otherwise we will eventually crash. 1124 } 1125 1126 sg_table = attach->dmabuf->ops->map_dma_buf(attach, direction); 1127 if (!sg_table) 1128 sg_table = ERR_PTR(-ENOMEM); 1129 if (IS_ERR(sg_table)) 1130 goto error_unpin; 1131 Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Link: https://lore.kernel.org/r/20250605085336.62156-1-christian.koenig@amd.com
2025-06-11Merge tag 'ath-current-20250608' of ↵Johannes Berg
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath Jeff Johnson says: ================== ath.git updates for v6.16-rc2 Fix a handful of both build and stability issues across multiple drivers. ================== Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-11wifi: iwlwifi: fix merge damage related to iwl_pci_resumeEmmanuel Grumbach
The changes I made in wifi: iwlwifi: don't warn if the NIC is gone in resume conflicted with a major rework done in this area. The merge de-facto removed my changes. Re-add them. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20250603091754.70182-1-emmanuel.grumbach@intel.com Fixes: 06c4b2036818 ("Merge tag 'iwlwifi-next-2025-05-15' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-11Revert "wifi: mwifiex: Fix HT40 bandwidth issue."Francesco Dolcini
This reverts commit 4fcfcbe45734 ("wifi: mwifiex: Fix HT40 bandwidth issue.") That commit introduces a regression, when HT40 mode is enabled, received packets are lost, this was experience with W8997 with both SDIO-UART and SDIO-SDIO variants. From an initial investigation the issue solves on its own after some time, but it's not clear what is the reason. Given that this was just a performance optimization, let's revert it till we have a better understanding of the issue and a proper fix. Cc: Jeff Chen <jeff.chen_1@nxp.com> Cc: stable@vger.kernel.org Fixes: 4fcfcbe45734 ("wifi: mwifiex: Fix HT40 bandwidth issue.") Closes: https://lore.kernel.org/all/20250603203337.GA109929@francesco-nb/ Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://patch.msgid.link/20250605130302.55555-1-francesco@dolcini.it [fix commit reference format] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-11macsec: MACsec SCI assignment for ES = 0Carlos Fernandez
According to 802.1AE standard, when ES and SC flags in TCI are zero, used SCI should be the current active SC_RX. Current code uses the header MAC address. Without this patch, when ES flag is 0 (using a bridge or switch), header MAC will not fit the SCI and MACSec frames will be discarted. In order to test this issue, MACsec link should be stablished between two interfaces, setting SC and ES flags to zero and a port identifier different than one. For example, using ip macsec tools: ip link add link $ETH0 macsec0 type macsec port 11 send_sci off end_station off ip macsec add macsec0 tx sa 0 pn 2 on key 01 $ETH1_KEY ip macsec add macsec0 rx port 11 address $ETH1_MAC ip macsec add macsec0 rx port 11 address $ETH1_MAC sa 0 pn 2 on key 02 ip link set dev macsec0 up ip link add link $ETH1 macsec1 type macsec port 11 send_sci off end_station off ip macsec add macsec1 tx sa 0 pn 2 on key 01 $ETH0_KEY ip macsec add macsec1 rx port 11 address $ETH0_MAC ip macsec add macsec1 rx port 11 address $ETH0_MAC sa 0 pn 2 on key 02 ip link set dev macsec1 up Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Co-developed-by: Andreu Montiel <Andreu.Montiel@technica-engineering.de> Signed-off-by: Andreu Montiel <Andreu.Montiel@technica-engineering.de> Signed-off-by: Carlos Fernandez <carlos.fernandez@technica-engineering.de> Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-06-11drm/sitronix: st7571-i2c: Select VIDEOMODE_HELPERSNathan Chancellor
This driver requires of_get_display_timing() from CONFIG_VIDEOMODE_HELPERS but does not select it. If no other driver selects it, there will be a failure from the linker if the driver is built in or modpost if it is a module. ERROR: modpost: "of_get_display_timing" [drivers/gpu/drm/sitronix/st7571-i2c.ko] undefined! Select CONFIG_VIDEOMODE_HELPERS to resolve the build failure. Fixes: 4b35f0f41ee2 ("drm/st7571-i2c: add support for Sitronix ST7571 LCD controller") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250610-drm-st7571-i2c-select-videomode-helpers-v1-1-d30b50ff6e64@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-06-10net: airoha: Enable RX queues 16-31Lorenzo Bianconi
Fix RX_DONE_INT_MASK definition in order to enable RX queues 16-31. Fixes: f252493e18353 ("net: airoha: Enable multiple IRQ lines support in airoha_eth driver.") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250609-aioha-fix-rx-queue-mask-v1-1-f33706a06fa2@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-10netconsole: fix appending sysdata when sysdata_fields == SYSDATA_RELEASEGustavo Luiz Duarte
Before appending sysdata, prepare_extradata() checks if any feature is enabled in sysdata_fields (and exits early if none is enabled). When SYSDATA_RELEASE was introduced, we missed adding it to the list of features being checked against sysdata_fields in prepare_extradata(). The result was that, if only SYSDATA_RELEASE is enabled in sysdata_fields, we incorreclty exit early and fail to append the release. Instead of checking specific bits in sysdata_fields, check if sysdata_fields has ALL bit zeroed and exit early if true. This fixes case when only SYSDATA_RELEASE enabled and makes the code more general / less error prone in future feature implementation. Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com> Reviewed-by: Breno Leitao <leitao@debian.org> Fixes: cfcc9239e78a ("netconsole: append release to sysdata") Link: https://patch.msgid.link/20250609-netconsole-fix-v1-1-17543611ae31@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-10net: usb: r8152: Add device ID for TP-Link UE200Lucas Sanchez Sagrado
The TP-Link UE200 is a RTL8152B based USB 2.0 Fast Ethernet adapter. This patch adds its device ID. It has been tested on Ubuntu 22.04.5. Signed-off-by: Lucas Sanchez Sagrado <lucsansag@gmail.com> Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://patch.msgid.link/20250609145536.26648-1-lucsansag@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-10intel_idle: Update arguments of mwait_idle_with_hints()Uros Bizjak
Commit a17b37a3f416 ("x86/idle: Change arguments of mwait_idle_with_hints() to u32") changed the type of arguments of mwait_idle_with_hints() from unsigned long to u32. Change the type of variables in the call to mwait_idle_with_hints() to unsigned int to follow the change. Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Link: https://patch.msgid.link/20250609063528.48715-1-ubizjak@gmail.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-06-10ACPI: resource: Use IRQ override on MACHENIKE 16PWentao Guan
Use ACPI IRQ override on MACHENIKE laptop to make the internal keyboard work. Add a new entry to the irq1_edge_low_force_override structure, similar to the existing ones. Link: https://bbs.deepin.org.cn/zh/post/287628 Signed-off-by: Wentao Guan <guanwentao@uniontech.com> Link: https://patch.msgid.link/20250603122059.1072790-1-guanwentao@uniontech.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-06-10ACPI: EC: Ignore ECDT tables with an invalid ID stringArmin Wolf
On the MSI Modern 14 C5M the ECDT table contains invalid data: UID : 00000000 GPE Number : 00 /* Invalid, 03 would be correct */ Namepath : "" /* Invalid, "\_SB.PCI0.SBRG.EC" would * be correct */ This slows down the EC access as the wrong GPE event is used for communication. Additionally the ID string is invalid. Ignore such faulty ECDT tables by verifying that the ID string has a valid format. Tested-by: glpnk@proton.me Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://patch.msgid.link/20250529235310.540530-1-W_Armin@gmx.de Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-06-10ACPI: CPPC: Fix NULL pointer dereference when nosmp is usedYunhui Cui
With nosmp in cmdline, other CPUs are not brought up, leaving their cpc_desc_ptr NULL. CPU0's iteration via for_each_possible_cpu() dereferences these NULL pointers, causing panic. Panic backtrace: [ 0.401123] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b8 ... [ 0.403255] [<ffffffff809a5818>] cppc_allow_fast_switch+0x6a/0xd4 ... Kernel panic - not syncing: Attempted to kill init! Fixes: 3cc30dd00a58 ("cpufreq: CPPC: Enable fast_switch") Reported-by: Xu Lu <luxu.kernel@bytedance.com> Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com> Link: https://patch.msgid.link/20250604023036.99553-1-cuiyunhui@bytedance.com [ rjw: New subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-06-10ACPI: PAD: Update arguments of mwait_idle_with_hints()Uros Bizjak
Commit a17b37a3f416 ("x86/idle: Change arguments of mwait_idle_with_hints() to u32") changed the type of arguments of mwait_idle_with_hints() from unsigned long to u32. Change the type of variables in the call to mwait_idle_with_hints() to unsigned int to follow the change. Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Link: https://patch.msgid.link/20250609064235.49146-1-ubizjak@gmail.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-06-10ACPI: APEI: EINJ: Do not fail einj_init() on faux_device_create() failureDan Williams
CXL has a symbol dependency on einj_core.ko, so if einj_init() fails then cxl_core.ko fails to load. Prior to the faux_device_create() conversion, einj_probe() failures were tracked by the einj_initialized flag without failing einj_init(). Revert to that behavior and always succeed einj_init() given there is no way, and no pressing need, to discern faux device-create vs device-probe failures. This situation arose because CXL knows proper kernel named objects to trigger errors against, but acpi-einj knows how to perform the error injection. The injection mechanism is shared with non-CXL use cases. The result is CXL now has a module dependency on einj-core.ko, and init/probe failures are handled at runtime. Fixes: 6cb9441bfe8d ("ACPI: APEI: EINJ: Transition to the faux device interface") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Ben Cheatham <benjamin.cheatham@amd.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/20250607033228.1475625-4-dan.j.williams@intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-06-10driver core: faux: Quiet probe failuresDan Williams
The acpi-einj conversion to faux_device_create() leads to a noisy error message when the error injection facility is disabled. Quiet the error as CXL error injection via ACPI expects the module to stay loaded even if the error injection facility is disabled. This situation arose because CXL knows proper kernel named objects to trigger errors against, but acpi-einj knows how to perform the error injection. The injection mechanism is shared with non-CXL use cases. The result is CXL now has a module dependency on einj-core.ko, and init/probe failures are handled at runtime. Fixes: 6cb9441bfe8d ("ACPI: APEI: EINJ: Transition to the faux device interface") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/20250607033228.1475625-3-dan.j.williams@intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-06-10driver core: faux: Suppress bind attributesDan Williams
faux_device_create() is almost a suitable candidate to replace platform_driver_probe() if not for the fact that faux_device_create() supports dynamic attach/detach of the driver. Drop the bind attributes with the expectation that simple faux devices can always assume that the device is permanently bound at create, and only unbound at 'destroy'. The acpi-einj driver depends on static bind. Fixes: 6cb9441bfe8d ("ACPI: APEI: EINJ: Transition to the faux device interface") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/20250607033228.1475625-2-dan.j.williams@intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-06-10e1000: Move cancel_work_sync to avoid deadlockJoe Damato
Previously, e1000_down called cancel_work_sync for the e1000 reset task (via e1000_down_and_stop), which takes RTNL. As reported by users and syzbot, a deadlock is possible in the following scenario: CPU 0: - RTNL is held - e1000_close - e1000_down - cancel_work_sync (cancel / wait for e1000_reset_task()) CPU 1: - process_one_work - e1000_reset_task - take RTNL To remedy this, avoid calling cancel_work_sync from e1000_down (e1000_reset_task does nothing if the device is down anyway). Instead, call cancel_work_sync for e1000_reset_task when the device is being removed. Fixes: e400c7444d84 ("e1000: Hold RTNL when e1000_down can be called") Reported-by: syzbot+846bb38dc67fe62cc733@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/683837bf.a00a0220.52848.0003.GAE@google.com/ Reported-by: John <john.cs.hey@gmail.com> Closes: https://lore.kernel.org/netdev/CAP=Rh=OEsn4y_2LvkO3UtDWurKcGPnZ_NPSXK=FbgygNXL37Sw@mail.gmail.com/ Signed-off-by: Joe Damato <jdamato@fastly.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-10ice/ptp: fix crosstimestamp reportingAnton Nadezhdin
Set use_nsecs=true as timestamp is reported in ns. Lack of this result in smaller timestamp error window which cause error during phc2sys execution on E825 NICs: phc2sys[1768.256]: ioctl PTP_SYS_OFFSET_PRECISE: Invalid argument This problem was introduced in the cited commit which omitted setting use_nsecs to true when converting the ice driver to use convert_base_to_cs(). Testing hints (ethX is PF netdev): phc2sys -s ethX -c CLOCK_REALTIME -O 37 -m phc2sys[1769.256]: CLOCK_REALTIME phc offset -5 s0 freq -0 delay 0 Fixes: d4bea547ebb57 ("ice/ptp: Remove convert_art_to_tsc()") Signed-off-by: Anton Nadezhdin <anton.nadezhdin@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit (git 2.34.1) at 2025-09-09 23:30:49 +0000