summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-02-11iwlwifi: mvm: global PM mode does not reset after FW crashRavi Darsi
When The driver in D3 and FW crash happens, trans->system_pm_mode is not reset to IWL_PLAT_PM_MODE_DISABLED which causes the driver not to send INIT conmmands and D3 resume fails. This patch contains the fix for resetting trans->system_pm_mode to IWL_PLAT_PM_MODE_DISABLED and D3 resume is successful. Signed-off-by: Ravi Darsi <ravi.darsi@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210172142.ad170ad48409.Ifc6b10e8b3f235876af91d0e23e90b462d270eff@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-11iwlwifi: mvm: reduce the print severity of failing getting NIC tempGolan Ben Ami
Currently, for all devices and families, failing getting the temp from the fw is indicated in the log as ERR. This is too severe for two reasons: 1. The driver has a fall back - and schedules the next temp read immediately after failing to read temp from the fw. 2. The temp read implementation in the fw is different between HWs, and on older devices the flow is a-sync and may timeout. Reducing the print severity from ERR to WARN will allow to track the issue if it will appear many times, but not frighten users if it appears once. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210172142.dfd423b2b2ef.Icd576dc3e2e7174d3ed9c1c32f48ea0013699e72@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-11iwlwifi: mvm: get NVM later in the mvm_start flowEmmanuel Grumbach
We don't need the NVM until fairly late in the flow and since this flow will be split soon, get the NVM later to unite it with the parts that really need it. Gather all what needs the NVM into a function. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210171218.bab0e65c4909.I789f3eb577b216ad1688269e036ce9fa4880f532@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-11iwlmvm: set properly NIC_NOT_ACK_ENABLED flagShaul Triebitz
The STA_CTXT_HE_NIC_NOT_ACK_ENABLED flag tells the firmware whether *we* support ack-enabled. So what should be checked is our *own* capability and not the *peer's* capability. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210171218.59f44e210096.I8f31968f6f7303255e212d869ca0131becd309aa@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-11iwlwifi: remove max_ht_ampdu_exponent config parameterJohannes Berg
This always has the same value, since we don't have any devices with different values; remove the parameter. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210171218.50d11cbb073f.Ia44d022a4c549eb5fe0254fb20c62aa8d0bba634@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-11iwlwifi: remove max_vht_ampdu_exponent config parameterJohannes Berg
This is not (or no longer) used, so remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210171218.ed18d7c8e7b8.Ic3fdf7c8636f332e3d5ee5841b03bf85e3bc4855@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-11iwlwifi: mvm: Check ret code for iwl_mvm_load_nvm_to_nicAbhishek Naik
Return value of the iwl_mvm_load_nvm_to_nic func is not analyzed. If load NVM to nic func fails and NVM is not loaded to fw properly, then fw may behave badly and lead to some strange issue. This commit will analyze return value and if load NVM to nic has failed, then the error code is sent to the previous func, which will trigger WRT log collection. iwl_fw_dbg_error_collect() func collects dump only if tri type is FW_DBG_TRIGGER_ALIVE_TIMEOUT. But when Load NVM to nic function fails trig_type is FW_DBG_TRIGGER_DRIVER. This commit also has code changes to collect dump when trig_type is FW_DBG_TRIGGER_DRIVER. Signed-off-by: Abhishek Naik <abhishek.naik@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210171218.32998850192a.Ic58d08cb6944ca55e343ff0032c82cfa7821e588@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-11iwlwifi: mvm: don't check if CSA event is running before removingSara Sharon
We may want to remove it before it started (i.e. before the actual switch time). Signed-off-by: Sara Sharon <sara.sharon@intel.com> Fixes: 58ddd9b6d194 ("iwlwifi: mvm: don't send a CSA command the firmware doesn't know") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210171218.835db8987b8a.Ic6c5d28d744302db1bc6c4314bd3138ba472f834@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-11iwlwifi: mvm: Support SCAN_CFG_CMD version 5Ilan Peer
Since the firmware support for internal station for auxiliary activities, there is no need to configure an auxiliary station as part of SCAN_CFG_CMD. Thus, this configuration was removed from the corresponding structure. Align the code accordingly. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210171218.9b8da8408692.I7fe99d73cd67ffc817c2ef6af4c9932ce9fc50b2@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-11iwlwifi: mvm: isolate the get nvm flowEmmanuel Grumbach
This will soon be a bit more complicated. Take it out to a function. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210171218.431f31a86ea0.I9db96647eb9c7142051e26cd5be3f52c5ffc5534@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-11iwlwifi: mvm: simplify iwl_mvm_dbgfs_registerEmmanuel Grumbach
No need to pass the dbgfs_dir just to assign it to mvm. Assign to mvm and then call iwl_mvm_dbgfs_register. This is a preparation towards the addition of a delayed op_mode_start flow. This will allow to split the op_mode_start flow. Registration to debugfs must happen after we register to mac80211 and the registration to mac80211 will soon be delayed in certain cases. In order not to have to remember the debugfs_dir in a separate variable, just set it into the mvm structure so that it can be usable later. Declare mvm->debugfs_dir in the iwl_mvm structure even when IWLWIFI_DEBUGFS isn't enabled to simplify the source code. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210171218.a92ee491863d.I047923aa3598fbf4fb6fce2cdff75a4969fedd76@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-11iwlwifi: mvm: register to mac80211 lastEmmanuel Grumbach
All the actions that were taken after the registration can be taken before the registration to mac80211. This will help to defer part of the op_mode_mvm_start function to a later stage in case the device is not available. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210171218.c03cc5db67c1.Ia928ca34d25a73d959a345ffbe4f1217c3f17394@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-11iwlwifi: acpi: add support for DSM RFIGregory Greenman
BIOS provides RFI feature enable/disable state via WiFi DSM ACPI object. By default the feature should be disabled. The GUID for this feature is different from the one driver currently uses, so need to provide a set of new definitions. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210171218.242bfe368981.Iaccce1e2fa3986b174d0b08942aa4fbf8bb94a95@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-11iwlwifi: mvm: add RFI-M supportGregory Greenman
RF Interference Mitigation is a new feature targeted to handle the problem of interference between DDR memory and WiFi. The role of the driver is to configure FW with the table holding a mapping between problematic channels/bands and the corresponding frequencies. This patch adds RFI infrastructure and adds two debugfs hooks: - send RFI configuration command (currently with a default table) which will reset feature in the FW - read the table, used by the FW (which can be a subset of the table that driver sent). Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210171218.2cea55a09bc7.I634b79795abad499ce442631d6672ffef8fc6d41@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10net: mvpp2: add an entry to skip parserStefan Chulski
This entry used when skipping the parser needed, for example, the custom header pretended to ethernet header. Suggested-by: Liron Himi <liron@marvell.com> Signed-off-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-pf: ethtool physical link configurationChristina Jacob
Register set_link_ksetting callback with driver such that link configurations parameters like advertised mode,speed, duplex and autoneg can be configured. below command ethtool -s eth0 advertise 0x1 speed 10 duplex full autoneg on Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-pf: ethtool physical link statusChristina Jacob
Register get_link_ksettings callback to get link status information from the driver. As virtual function (vf) shares same physical link same API is used for both the drivers and for loop back drivers simply returns the fixed values as its does not have physical link. ethtool eth3 Settings for eth3: Supported ports: [ ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full 10000baseKR/Full 1000baseX/Full Supports auto-negotiation: No Supported FEC modes: BaseR RS Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: None ethtool lbk0 Settings for lbk0: Speed: 100000Mb/s Duplex: Full Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-af: advertised link modes support on cgxChristina Jacob
CGX supports setting advertised link modes on physical link. This patch adds support to derive cgx mode from ethtool link mode and pass it to firmware to configure the same. Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-af: Physical link configuration supportChristina Jacob
CGX LMAC, the physical interface support link configuration parameters like speed, auto negotiation, duplex etc. Firmware saves these into memory region shared between firmware and this driver. This patch adds mailbox handler set_link_mode, fw_data_get to configure and read these parameters. Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-pf: ethtool fec mode supportChristina Jacob
Add ethtool support to configure fec modes baser/rs and support to fecth FEC stats from CGX as well PHY. Configure fec mode - ethtool --set-fec eth0 encoding rs/baser/off/auto Query fec mode - ethtool --show-fec eth0 Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-af: Add new CGX_CMD to get PHY FEC statisticsFelix Manlunas
This patch adds support to fetch fec stats from PHY. The stats are put in the shared data struct fwdata. A PHY driver indicates that it has FEC stats by setting the flag fwdata.phy.misc.has_fec_stats Besides CGX_CMD_GET_PHY_FEC_STATS, also add CGX_CMD_PRBS and CGX_CMD_DISPLAY_EYE to enum cgx_cmd_id so that Linux's enum list is in sync with firmware's enum list. Signed-off-by: Felix Manlunas <fmanlunas@marvell.com> Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-af: forward error correction configurationChristina Jacob
CGX block supports forward error correction modes baseR and RS. This patch adds support to set encoding mode and to read corrected/uncorrected block counters Adds new mailbox handlers set_fec to configure encoding modes and fec_stats to read counters and also increase mbox timeout to accomdate firmware command response timeout. Along with new CGX_CMD_SET_FEC command add other commands to sync with kernel enum list with firmware. Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net: octeontx2: Fix the confusion in buffer alloc failure pathKevin Hao
Pavel pointed that the return of dma_addr_t in otx2_alloc_rbuf/__otx2_alloc_rbuf() seem suspicious because a negative error code may be returned in some cases. For a dma_addr_t, the error code such as -ENOMEM does seem a valid value, so we can't judge if the buffer allocation fail or not based on that value. Add a parameter for otx2_alloc_rbuf/__otx2_alloc_rbuf() to store the dma address and make the return value to indicate if the buffer allocation really fail or not. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Kevin Hao <haokexin@gmail.com> Tested-by: Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net: mhi: Add mbim protoLoic Poulain
MBIM has initially been specified by USB-IF for transporting data (IP) between a modem and a host over USB. However some modern modems also support MBIM over PCIe (via MHI). In the same way as QMAP(rmnet), it allows to aggregate IP packets and to perform context multiplexing. This change adds minimal MBIM data transport support to MHI, allowing to support MBIM only modems. MBIM being based on USB NCM, it reuses and copy some helpers/functions from the USB stack (cdc-ncm, cdc-mbim). Note that is a subset of the CDC-MBIM specification, supporting only transport of network data (IP), there is no support for DSS. Moreover the multi-session (for multi-pdn) is not supported in this initial version, but will be added latter, and aligned with the cdc-mbim solution (VLAN tags). This code has been inspired from the mhi_mbim downstream implementation (Carl Yin <carl.yin@quectel.com>). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net: mhi: Add rx_length_errors statLoic Poulain
This can be used by proto when packet len is incorrect. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net: mhi: Create mhi.hLoic Poulain
Move mhi-net shared structures to mhi header, that will be used by upcoming proto(s). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net: mhi: Add dedicated folderLoic Poulain
Create a dedicated mhi directory for mhi-net, mhi-net is going to be split into differente files (for additional protocol support). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net: mhi: Add protocol supportLoic Poulain
MHI can transport different protocols, some are handled at upper level, like IP and QMAP(rmnet/netlink), but others will need to be inside MHI net driver, like mbim. This change adds support for protocol rx and tx_fixup callbacks registration, that can be used to encode/decode the targeted protocol. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10cxgb4: collect serial config version from registerRahul Lakkireddy
Collect serial config version information directly from an internal register, instead of explicitly resizing VPD. v2: - Add comments on info stored in PCIE_STATIC_SPARE2 register. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10i40e: remove the useless value assignment in i40e_clean_adminq_subtaskKaixu Xia
The variable ret is overwritten by the following call i40e_clean_arq_element() and the assignment is useless, so remove it. Reported-by: Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10i40e: VLAN field for flow directorPrzemyslaw Patynowski
Allow user to specify VLAN field and add it to flow director. Show VLAN field in "ethtool -n ethx" command. Handle VLAN type and tag field provided by ethtool command. Refactored filter addition, by replacing static arrays with runtime dummy packet creation, which allows specifying VLAN field. Previously, VLAN field was omitted. Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10i40e: Add flow director support for IPv6Przemyslaw Patynowski
Flow director for IPv6 is not supported. 1) Implementation of support for IPv6 flow director. 2) Added handlers for addition of TCP6, UDP6, SCTP6, IPv6. 3) Refactored legacy code to make it more generic. 4) Added packet templates for TCP6, UDP6, SCTP6, IPv6. 5) Added handling of IPv6 source and destination address for flow director. 6) Improved argument passing for source and destination portin TCP6, UDP6 and SCTP6. 7) Added handling of ethtool -n for IPv6, TCP6,UDP6, SCTP6. 8) Used correct bit flag regarding FLEXOFF field of flow director data descriptor. Without this patch, there would be no support for flow director on IPv6, TCP6, UDP6, SCTP6. Tested based on x710 datasheet by using: ethtool -N enp133s0f0 flow-type tcp4 src-port 13 dst-port 37 user-def 0x44142 action 1 ethtool -N enp133s0f0 flow-type tcp6 src-port 13 dst-port 40 user-def 0x44142 action 2 ethtool -N enp133s0f0 flow-type udp4 src-port 20 dst-port 40 user-def 0x44142 action 3 ethtool -N enp133s0f0 flow-type udp6 src-port 25 dst-port 40 user-def 0x44142 action 4 ethtool -N enp133s0f0 flow-type sctp4 src-port 55 dst-port 65 user-def 0x44142 action 5 ethtool -N enp133s0f0 flow-type sctp6 src-port 60 dst-port 40 user-def 0x44142 action 6 ethtool -N enp133s0f0 flow-type ip4 src-ip 1.1.1.1 dst-ip 1.1.1.4 user-def 0x44142 action 7 ethtool -N enp133s0f0 flow-type ip6 src-ip fe80::3efd:feff:fe6f:bbbb dst-ip fe80::3efd:feff:fe6f:aaaa user-def 0x44142 action 8 Then send traffic from client which matches the criteria provided to ethtool. Observe that packets are redirected to user set queues with ethtool -S <interface> Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10i40e: Add EEE status getting & setting implementationAleksandr Loktionov
Implement Energy Efficient Ethernet (EEE) status getting & setting. The i40e_get_eee() requesting PHY EEE capabilities from firmware. The i40e_set_eee() function requests PHY EEE capabilities from firmware and sets PHY EEE advertising to full abilities or 0 depending whether EEE is to be enabled or disabled. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10i40e: Add netlink callbacks support for software based DCBArkadiusz Kubalewski
Add callbacks used by software based LLDP agent, which allows to configure DCB feature from userspace. Update copyright dates as appropriate. If LLDP agent is turned off in BIOS, or after setting private flag ("disable-fw-lldp on"). The driver initialized DCB functionality with default values, one traffic class with 100% bandwidth allocated. The new netlink callbacks are required for software LLDP agent, it must be able to acquire current DCB configuration of a network port and apply DCB configuration changes, if required. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10i40e: Add init and default config of software based DCBArkadiusz Kubalewski
Add extra handling on changing the "disable-fw-lldp" private flag to properly initialize software based DCB feature. Add default configuration of DCB functionality when Firmware LLDP agent is turned off, in case of driver probe and device reset on reconfiguration. Update copyright dates as appropriate. Software based DCB is a brand-new feature in i40e driver. Before, DCB was implemented by Firmware LLDP agent only. The agent was responsible for handling incoming DCB-related LLDP frames and applying received DCB configuration to hardware. Default configuration and new initialization flow for software based DCB is required. If LLDP agent is turned off in BIOS, or after setting private flag ("disable-fw-lldp on"). The driver initializes DCB functionality with default values, one traffic class with 100% bandwidth allocated. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10i40e: Add hardware configuration for software based DCBArkadiusz Kubalewski
Add registers and definitions required for applying DCB related hardware configuration. Add functions responsible for calculating and setting proper hardware configuration values for software based DCB functionality. Add function responsible for invoking Admin Queue command, which results in applying new DCB configuration to the hardware. Update copyright dates as appropriate. Software based DCB is a brand-new feature in i40e driver. Before, DCB was implemented by Firmware LLDP agent only. The agent was responsible for handling incoming DCB-related LLDP frames and applying received DCB configuration to hardware. New communication channel between software and hardware is required for software driver. It must be able to calculate and configure all the registers related for DCB feature. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2021-02-10Merge tag 'pm-5.11-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Address a performance regression related to scale-invariance on x86 that may prevent turbo CPU frequencies from being used in certain workloads on systems using acpi-cpufreq as the CPU performance scaling driver and schedutil as the scaling governor" * tag 'pm-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: ACPI: Update arch scale-invariance max perf ratio if CPPC is not there cpufreq: ACPI: Extend frequency tables to cover boost frequencies
2021-02-10Merge tag 'acpi-5.11-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Revert a problematic ACPICA commit that changed the code to attempt to update memory regions which may be read-only on some systems (Ard Biesheuvel)" * tag 'acpi-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPICA: Interpreter: fix memory leak by using existing buffer"
2021-02-10Merge tag 'dmaengine-fix2-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "Some late fixes for dmaengine: Core: - fix channel device_node deletion Driver fixes: - dw: revert of runtime pm enabling - idxd: device state fix, interrupt completion and list corruption - ti: resource leak * tag 'dmaengine-fix2-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine dw: Revert "dmaengine: dw: Enable runtime PM" dmaengine: idxd: check device state before issue command dmaengine: ti: k3-udma: Fix a resource leak in an error handling path dmaengine: move channel device_node deletion to driver dmaengine: idxd: fix misc interrupt completion dmaengine: idxd: Fix list corruption in description completion
2021-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: "Another pile of networing fixes: 1) ath9k build error fix from Arnd Bergmann 2) dma memory leak fix in mediatec driver from Lorenzo Bianconi. 3) bpf int3 kprobe fix from Alexei Starovoitov. 4) bpf stackmap integer overflow fix from Bui Quang Minh. 5) Add usb device ids for Cinterion MV31 to qmi_qwwan driver, from Christoph Schemmel. 6) Don't update deleted entry in xt_recent netfilter module, from Jazsef Kadlecsik. 7) Use after free in nftables, fix from Pablo Neira Ayuso. 8) Header checksum fix in flowtable from Sven Auhagen. 9) Validate user controlled length in qrtr code, from Sabyrzhan Tasbolatov. 10) Fix race in xen/netback, from Juergen Gross, 11) New device ID in cxgb4, from Raju Rangoju. 12) Fix ring locking in rxrpc release call, from David Howells. 13) Don't return LAPB error codes from x25_open(), from Xie He. 14) Missing error returns in gsi_channel_setup() from Alex Elder. 15) Get skb_copy_and_csum_datagram working properly with odd segment sizes, from Willem de Bruijn. 16) Missing RFS/RSS table init in enetc driver, from Vladimir Oltean. 17) Do teardown on probe failure in DSA, from Vladimir Oltean. 18) Fix compilation failures of txtimestamp selftest, from Vadim Fedorenko. 19) Limit rx per-napi gro queue size to fix latency regression, from Eric Dumazet. 20) dpaa_eth xdp fixes from Camelia Groza. 21) Missing txq mode update when switching CBS off, in stmmac driver, from Mohammad Athari Bin Ismail. 22) Failover pending logic fix in ibmvnic driver, from Sukadev Bhattiprolu. 23) Null deref fix in vmw_vsock, from Norbert Slusarek. 24) Missing verdict update in xdp paths of ena driver, from Shay Agroskin. 25) seq_file iteration fix in sctp from Neil Brown. 26) bpf 32-bit src register truncation fix on div/mod, from Daniel Borkmann. 27) Fix jmp32 pruning in bpf verifier, from Daniel Borkmann. 28) Fix locking in vsock_shutdown(), from Stefano Garzarella. 29) Various missing index bound checks in hns3 driver, from Yufeng Mo. 30) Flush ports on .phylink_mac_link_down() in dsa felix driver, from Vladimir Oltean. 31) Don't mix up stp and mrp port states in bridge layer, from Horatiu Vultur. 32) Fix locking during netif_tx_disable(), from Edwin Peer" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits) bpf: Fix 32 bit src register truncation on div/mod bpf: Fix verifier jmp32 pruning decision logic bpf: Fix verifier jsgt branch analysis on max bound vsock: fix locking in vsock_shutdown() net: hns3: add a check for index in hclge_get_rss_key() net: hns3: add a check for tqp_index in hclge_get_ring_chain_from_mbx() net: hns3: add a check for queue_id in hclge_reset_vf_queue() net: dsa: felix: implement port flushing on .phylink_mac_link_down switchdev: mrp: Remove SWITCHDEV_ATTR_ID_MRP_PORT_STAT bridge: mrp: Fix the usage of br_mrp_port_switchdev_set_state net: watchdog: hold device global xmit lock during tx disable netfilter: nftables: relax check for stateful expressions in set definition netfilter: conntrack: skip identical origin tuple in same zone only vsock/virtio: update credit only if socket is not closed net: fix iteration for sctp transport seq_files net: ena: Update XDP verdict upon failure net/vmw_vsock: improve locking in vsock_connect_timeout() net/vmw_vsock: fix NULL pointer dereference ibmvnic: Clear failover_pending if unable to schedule net: stmmac: set TxQ mode back to DCB after disabling CBS ...
2021-02-10drivers/perf: Replace spin_lock_irqsave to spin_lockQi Liu
There is no need to do spin_lock_irqsave in context of hard IRQ, so replace them with spin_lock. Signed-off-by: Qi Liu <liuqi115@huawei.com> Link: https://lore.kernel.org/r/1612863742-1551-1-git-send-email-liuqi115@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2021-02-10Merge back ACPICA material for v5.12.Rafael J. Wysocki
2021-02-10Merge back cpufreq updates for v5.12.Rafael J. Wysocki
2021-02-10ACPI: OSL: Clean up printing messagesRafael J. Wysocki
Replace the ACPI_DEBUG_PRINT() instance in osl.c unrelated to the ACPICA debug with acpi_handle_debug(), add a pr_fmt() definition to osl.c and replace direct printk() usage in that file with the suitable pr_*() calls. While at it, add a physical address value to the message in acpi_os_map_iomem() and reword a couple of messages to avoid using function names in them. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-10staging: rtl8723bs: remove blank line from include/autoconf.hPhillip Potter
Remove additional blank line from include/autoconf.h, fixes one checkpatch check notice. Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Link: https://lore.kernel.org/r/20210210170024.100937-1-phil@philpotter.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10nbd: Convert to DEFINE_SHOW_ATTRIBUTELiao Pingfang
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Liao Pingfang <winndows@163.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-10nvme: add 48-bit DMA address quirk for Amazon NVMe controllersFilippo Sironi
Some Amazon NVMe controllers do not follow the NVMe specification and are limited to 48-bit DMA addresses. Add a quirk to force bounce buffering if needed and limit the IOVA allocation for these devices. This affects all current Amazon NVMe controllers that expose EBS volumes (0x0061, 0x0065, 0x8061) and local instance storage (0xcd00, 0xcd01, 0xcd02). Signed-off-by: Filippo Sironi <sironi@amazon.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10nvme-hwmon: rework to avoid devm allocationHannes Reinecke
The original design to use device-managed resource allocation doesn't really work as the NVMe controller has a vastly different lifetime than the hwmon sysfs attributes, causing warning about duplicate sysfs entries upon reconnection. This patch reworks the hwmon allocation to avoid device-managed resource allocation, and uses the NVMe controller as parent for the sysfs attributes. Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Hannes Reinecke <hare@suse.de> Tested-by: Enzo Matsumiya <ematsumiya@suse.de> Tested-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10nvmet: remove else at the end of the functionChaitanya Kulkarni
The function nvmet_parse_io_cmd() returns value from nvmet_file_parse_io_cmd() or nvmet_bdev_parse_io_cmd() based on which backend is set for the request. Remove the else and just return the value from nvmet_bdev_parse_io_cmd(). Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
generated by cgit (git 2.34.1) at 2025-09-14 10:30:10 +0000