| Age | Commit message (Collapse) | Author |
|---|
|
The check for bounded gadget driver in dwc3_gadget_start() was to
prevent going through the initialization again without any cleanup. The
recent commit 49d08cfc7830 ("usb: udc: core: Introduce started state")
updated the UDC framework and guarantees this won't happen while the UDC
is started. Also, this check doesn't prevent requesting threaded irq to
the same dev_id, which will mess up the irq freeing logic. Let's remove
it.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ccc90f316cf78bb5f7d46d3fd84f4c7f2c3020b1.1612518764.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The setting of the device speed should be limited by the device's
maximum_speed. Check and prevent the driver from attempting to configure
higher than the maximum_speed.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/4fae4a9ebb60464d64d8b8f6fdfc2777a2206a69.1611106162.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Track the number of connected lanes and speed in corresponding enum
usb_ssp_rate for SuperSpeed Plus capable device.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/2389592188d2e37a2ee45edaf04d942b19f3af82.1611106162.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Implement gadget ops udc_set_ssp_rate(). This allows the gadget/core
driver to select SSP signaling rate and number of lanes to for DWC_usb32
controller.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/8998b65fddfa02cab57bfc6aa35e9f101b252068.1611106162.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The DWC_usb32 controller supports dual-lane SuperSpeed Plus. Check the
maximum_speed property for any limitation in the HW to initialize and
validate the maximum number of lanes and speed the device will operate.
Currently the controller has no visibility into the HW parameter to
determine the maximum number of lanes the HW supports. If the number of
lanes is not specified for SSP, then set the default rate to gen2x2 for
DWC_usb32 and gen2x1 for DWC_usb31.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/08d43f2a99198bed84895c272340449a6d03710e.1611106162.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The USB "maximum-speed" property can now take the SSP signaling rate
generation and lane count with these new strings:
"super-speed-plus-gen2x2"
"super-speed-plus-gen2x1"
"super-speed-plus-gen1x2"
Introduce usb_get_maximum_ssp_rate() to parse for the corresponding
usb_ssp_rate enum. The original usb_get_maximum_speed() will return
USB_SPEED_SUPER_PLUS if it matches one of these new strings.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/f8ed896313d8cd8e2d2b540fc82db92b3ddf8a47.1611106162.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
multiple structures contains a ieee80211_rts structure, which is required to
have at least two byte alignment, but are annotated with a __packed attribute
to force single-byte alignment:
staging/vt6656/rxtx.h:98:1: warning: alignment 1 of 'struct vnt_rts_g' is less than 2 [-Wpacked-not-aligned]
staging/vt6656/rxtx.h:106:1: warning: alignment 1 of 'struct vnt_rts_ab' is less than 2 [-Wpacked-not-aligned]
staging/vt6656/rxtx.h:116:1: warning: alignment 1 of 'struct vnt_cts' is less than 2 [-Wpacked-not-aligned]
I see no reason why the structure itself would be misaligned, and all members
have at least two-byte alignment within the structure, so use the same
constraint on the sturcture itself.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210204162731.3132069-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Building this with 'make W=1' produces a couple of warnings:
rtl8723bs/include/ieee80211.h:730:1: warning: alignment 1 of 'struct ieee80211_assoc_request_frame' is less than 2 [-Wpacked-not-aligned]
rtl8723bs/include/ieee80211.h:737:1: warning: alignment 1 of 'struct ieee80211_assoc_response_frame' is less than 2 [-Wpacked-not-aligned]
The warnings are in dead code, so just remove the bits that
are obviously broken like this.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210204162956.3276523-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix some pointer declarations where '*' is not adjacent to
data name.
This fixes checkpatch.pl error: "POINTER_LOCATION: "foo * bar"
should be "foo *bar""
Signed-off-by: Ayush <ayush@disroot.org>
Link: https://lore.kernel.org/r/20210204211750.102129-1-ayush@disroot.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace strcpy() with strscpy() in bcm2835-audio/bcm2835.c to prevent the
following when loading snd-bcm2835:
[ 58.480634] ------------[ cut here ]------------
[ 58.485321] kernel BUG at lib/string.c:1149!
[ 58.489650] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 58.495214] Modules linked in: snd_bcm2835(COE+) snd_pcm snd_timer snd dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua btsdio bluetooth ecdh_generic ecc bcm2835_v4l2(CE) bcm2835_codec(CE) brcmfmac bcm2835_isp(CE) bcm2835_mmal_vchiq(CE) brcmutil cfg80211 v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops raspberrypi_hwmon videobuf2_v4l2 videobuf2_common videodev bcm2835_gpiomem mc vc_sm_cma(CE) rpivid_mem uio_pdrv_genirq uio sch_fq_codel drm ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq libcrc32c raid1 raid0 multipath linear dwc2 roles spidev udc_core crct10dif_ce xhci_pci xhci_pci_renesas phy_generic aes_neon_bs aes_neon_blk crypto_simd cryptd
[ 58.563787] CPU: 3 PID: 1959 Comm: insmod Tainted: G C OE 5.11.0-1001-raspi #1
[ 58.572172] Hardware name: Raspberry Pi 4 Model B Rev 1.2 (DT)
[ 58.578086] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[ 58.584178] pc : fortify_panic+0x20/0x24
[ 58.588161] lr : fortify_panic+0x20/0x24
[ 58.592136] sp : ffff800010a83990
[ 58.595491] x29: ffff800010a83990 x28: 0000000000000002
[ 58.600879] x27: ffffb0b07cb72928 x26: 0000000000000000
[ 58.606268] x25: ffff39e884973838 x24: ffffb0b07cb74190
[ 58.611655] x23: ffffb0b07cb72030 x22: 0000000000000000
[ 58.617042] x21: ffff39e884973014 x20: ffff39e88b793010
[ 58.622428] x19: ffffb0b07cb72670 x18: 0000000000000030
[ 58.627814] x17: 0000000000000000 x16: ffffb0b092ce2c1c
[ 58.633200] x15: ffff39e88b901500 x14: 0720072007200720
[ 58.638588] x13: 0720072007200720 x12: 0720072007200720
[ 58.643979] x11: ffffb0b0936cbdf0 x10: 00000000fffff000
[ 58.649366] x9 : ffffb0b09220cfa8 x8 : 0000000000000000
[ 58.654752] x7 : ffffb0b093673df0 x6 : ffffb0b09364e000
[ 58.660140] x5 : 0000000000000000 x4 : ffff39e93b7db948
[ 58.665526] x3 : ffff39e93b7ebcf0 x2 : 0000000000000000
[ 58.670913] x1 : 0000000000000000 x0 : 0000000000000022
[ 58.676299] Call trace:
[ 58.678775] fortify_panic+0x20/0x24
[ 58.682402] snd_bcm2835_alsa_probe+0x5b8/0x7d8 [snd_bcm2835]
[ 58.688247] platform_probe+0x74/0xe4
[ 58.691963] really_probe+0xf0/0x510
[ 58.695585] driver_probe_device+0xe0/0x100
[ 58.699826] device_driver_attach+0xcc/0xd4
[ 58.704068] __driver_attach+0xb0/0x17c
[ 58.707956] bus_for_each_dev+0x7c/0xd4
[ 58.711843] driver_attach+0x30/0x40
[ 58.715467] bus_add_driver+0x154/0x250
[ 58.719354] driver_register+0x84/0x140
[ 58.723242] __platform_driver_register+0x34/0x40
[ 58.728013] bcm2835_alsa_driver_init+0x30/0x1000 [snd_bcm2835]
[ 58.734024] do_one_initcall+0x54/0x300
[ 58.737914] do_init_module+0x60/0x280
[ 58.741719] load_module+0x680/0x770
[ 58.745344] __do_sys_finit_module+0xbc/0x130
[ 58.749761] __arm64_sys_finit_module+0x2c/0x40
[ 58.754356] el0_svc_common.constprop.0+0x88/0x220
[ 58.759216] do_el0_svc+0x30/0xa0
[ 58.762575] el0_svc+0x28/0x70
[ 58.765669] el0_sync_handler+0x1a4/0x1b0
[ 58.769732] el0_sync+0x178/0x180
[ 58.773095] Code: aa0003e1 91366040 910003fd 97ffee21 (d4210000)
[ 58.779275] ---[ end trace 29be5b17497bd898 ]---
[ 58.783955] note: insmod[1959] exited with preempt_count 1
[ 58.791921] ------------[ cut here ]------------
For the sake of it, replace all the other occurences of strcpy() under
bcm2835-audio/ as well.
Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Link: https://lore.kernel.org/r/20210205072502.10907-1-juergh@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use min_t instead of min function in qlge/qlge_main.c
Fixes following checkpatch.pl warning:
WARNING: min() should probably be min_t(int, MAX_CPUS, num_online_cpus())
Signed-off-by: Amey Narkhede <ameynarkhede02@gmail.com>
Link: https://lore.kernel.org/r/20210205092433.4131-1-ameynarkhede02@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Patch removes some useless trace events that can
be replaced by ftrace.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Peter Chen <peter.chen@kernel.org>
|
|
Process FIB route update events to dynamically update the stack device
rules when tunnel routing changes. Use rtnl lock to prevent FIB event
handler from running concurrently with neigh update and neigh stats
workqueue tasks. Use encap_tbl_lock mutex to synchronize with TC rule
update path that doesn't use rtnl lock.
FIB event workflow for encap flows:
- Unoffload all flows attached to route encaps from slow or fast path
depending on encap destination endpoint neigh state.
- Update encap IP header according to new route dev.
- Update flows mod_hdr action that is responsible for overwriting reg_c0
source port bits to source port of new underlying VF of new route dev. This
step requires changing flow create/delete code to save flow parse attribute
mod_hdr_acts structure for whole flow lifetime instead of deallocating it
after flow creation. Refactor mod_hdr code to allow saving id of individual
mod_hdr actions and updating them with dedicated helper.
- Offload all flows to either slow or fast path depending on encap
destination endpoint neigh state.
FIB event workflow for decap flows:
- Unoffload all route flows from hardware. When last route flow is deleted
all indirect table rules for the route dev will also be deleted.
- Update flow attr decap_vport and destination MAC according to underlying
VF of new rote dev.
- Offload all route flows back to hardware creating new indirect table
rules according to updated flow attribute data.
Extract some neigh update code to helper functions to be used by both neigh
update and route update infrastructure.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Some of the encap-specific functions and fields will also be used by route
update infrastructure in following patches. Rename them to generic names.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Following patch in series implement routing update event which requires
ability to modify rule match_to_reg modify header actions dynamically
during rule lifetime. In order to accommodate such behavior, refactor and
extend TC infrastructure in following ways:
- Modify mod_hdr infrastructure to preserve its parse attribute for whole
rule lifetime, instead of deallocating it after rule creation.
- Extend match_to_reg infrastructure with new function
mlx5e_tc_match_to_reg_set_and_get_id() that returns mod_hdr action id that
can be used afterwards to update the action, and
mlx5e_tc_match_to_reg_mod_hdr_change() that can modify existing actions by
its id.
- Extend tun API with new functions mlx5e_tc_tun_update_header_ipv{4|6}()
that are used to updated existing encap entry tunnel header.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Following patches in series implements route update which can cause encap
entries to migrate between routing devices. Consecutively, their parent
nhe's need to be also transferable between devices instead of having neigh
device as a part of their immutable key. Move neigh device from struct
mlx5_neigh to struct mlx5e_neigh_hash_entry and check that nhe and neigh
devices are the same in workqueue neigh update handler.
Save neigh net_device that can change dynamically in dedicated nhe->dev
field. With FIB event handler that is implemented in following patches
changing nhe->dev, NETEVENT_DELAY_PROBE_TIME_UPDATE handler can
concurrently access the nhe entry when traversing neigh list under rcu read
lock. Processing stale values in that handler doesn't change the handler
logic, so just wrap all accesses to the dev pointer in {WRITE|READ}_ONCE()
helpers.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Implement dedicated route entry infrastructure to be used in following
patch by route update event. Both encap (indirectly through their
corresponding encap entries) and decap (directly) flows are attached to
routing entry. Since route update also requires updating encap (route
device MAC address is a source MAC address of tunnel encapsulation), same
encap_tbl_lock mutex is used for synchronization.
The new infrastructure looks similar to existing infrastructures for shared
encap, mod_hdr and hairpin entries:
- Per-eswitch hash table is used for quick entry lookup.
- Flows are attached to per-entry linked list and hold reference to entry
during their lifetime.
- Atomic reference counting and rcu mechanisms are used as synchronization
primitives for concurrent access.
The infrastructure also enables connection tracking on stacked devices
topology by attaching CT chain 0 flow on tunneling dev to decap route
entry.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Following patches in series extend the extracted code with routing
infrastructure. To improve code modularity created a dedicated
tc_tun_encap.c source file and move encap/decap related code to the new
file. Export code that is used by both regular TC code and encap/decap code
into tc_priv.h (new header intended to be used only by TC module). Rename
some exported functions by adding "mlx5e_" prefix to their names.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Previous patch in series that implements stack devices RX path implements
indirect table rules that match on tunnel VNI. After such rule is created
all tunnel traffic is recirculated to root table. However, recirculated
packet might not match on any rules installed in the table (for example,
when IP traffic follows ARP traffic). In that case packets appear on
representor of tunnel endpoint VF instead being redirected to the VF
itself.
Extend slow table with additional flow group that matches on reg_c0 (source
port value set by indirect tables implemented by previous patch in series)
and reg_c1 (special 0xFFF mark). When creating offloads fdb tables, install
one rule per VF vport to match on recirculated miss packets and redirect
them to appropriate VF vport. Modify indirect tables code to also rewrite
reg_c1 with special 0xFFF mark.
Implementation reuses reg_c1 tunnel id bits. This is safe to do because
recirculated packets are always matched before decapsulation.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Following patch in series uses reg_c1 in eswitch code. To use reg_c1
helpers in both TC and eswitch code, refactor existing helpers according to
similar use case of reg_c0 and move the functionality into eswitch.h.
Calculate reg mappings length from new defines to ensure that they are
always in sync and only need to be changed in single place.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When tunnel endpoint is on VF the encapsulated RX traffic is exposed on the
representor of the VF without any further processing of rules installed on
the VF. Detect such case by checking if the device returned by route lookup
in decap rule handling code is a mlx5 VF and handle it with new redirection
tables API.
Example TC rules for VF tunnel traffic:
1. Rule that encapsulates the tunneled flow and redirects packets from
source VF rep to tunnel device:
$ tc -s filter show dev enp8s0f0_1 ingress
filter protocol ip pref 4 flower chain 0
filter protocol ip pref 4 flower chain 0 handle 0x1
dst_mac 0a:40:bd:30:89:99
src_mac ca:2e:a7:3f:f5:0f
eth_type ipv4
ip_tos 0/0x3
ip_flags nofrag
in_hw in_hw_count 1
action order 1: tunnel_key set
src_ip 7.7.7.5
dst_ip 7.7.7.1
key_id 98
dst_port 4789
nocsum
ttl 64 pipe
index 1 ref 1 bind 1 installed 411 sec used 411 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
no_percpu
used_hw_stats delayed
action order 2: mirred (Egress Redirect to device vxlan_sys_4789) stolen
index 1 ref 1 bind 1 installed 411 sec used 0 sec
Action statistics:
Sent 5615833 bytes 4028 pkt (dropped 0, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 5615833 bytes 4028 pkt
backlog 0b 0p requeues 0
cookie bb406d45d343bf7ade9690ae80c7cba4
no_percpu
used_hw_stats delayed
2. Rule that redirects from tunnel device to UL rep:
$ tc -s filter show dev vxlan_sys_4789 ingress
filter protocol ip pref 4 flower chain 0
filter protocol ip pref 4 flower chain 0 handle 0x1
dst_mac ca:2e:a7:3f:f5:0f
src_mac 0a:40:bd:30:89:99
eth_type ipv4
enc_dst_ip 7.7.7.5
enc_src_ip 7.7.7.1
enc_key_id 98
enc_dst_port 4789
enc_tos 0
ip_flags nofrag
in_hw in_hw_count 1
action order 1: tunnel_key unset pipe
index 2 ref 1 bind 1 installed 434 sec used 434 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
used_hw_stats delayed
action order 2: mirred (Egress Redirect to device enp8s0f0_1) stolen
index 4 ref 1 bind 1 installed 434 sec used 0 sec
Action statistics:
Sent 129936 bytes 1082 pkt (dropped 0, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 129936 bytes 1082 pkt
backlog 0b 0p requeues 0
cookie ac17cf398c4c69e4a5b2f7aabd1b88ff
no_percpu
used_hw_stats delayed
Co-developed-by: Dmytro Linkin <dlinkin@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Remove hardcoded match on tunnel destination MAC address. Such match is no
longer required and would be wrong for stacked devices topology where
encapsulation destination MAC address will be the address of tunnel VF that
can change dynamically on route change (implemented in following patches in
the series).
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Indirect table infrastructure is used to allow fully processing VF tunnel
traffic in hardware. Kernel software model uses two TC rules for such
traffic: UL rep to tunnel device, then tunnel VF rep to destination VF rep.
To implement such pipeline driver needs to program the hardware after
matching on UL rule to overwrite source vport from UL to tunnel VF and
recirculate the packet to the root table to allow matching on the rule
installed on tunnel VF. For this indirect table matches all encapsulated
traffic by tunnel parameters and all other IP traffic is sent to tunnel VF
by the miss rule.
Indirect table API overview:
- mlx5_esw_indir_table_{init|destroy}() - init and destroy opaque indirect
table object.
- mlx5_esw_indir_table_get() - get or create new table according to vport
id and IP version. Table has following pre-created groups: recirculation
group with match on ethertype and VNI (rules that match encapsulated
packets are installed to this group) and forward group with default/miss
rule that forwards to vport of tunnel endpoint VF (rule for regular
non-encapsulated packets).
- mlx5_esw_indir_table_put() - decrease reference to the indirect table and
matching rule (for encapsulated traffic).
- mlx5_esw_indir_table_needed() - check that in_port is an uplink port and
out_port is VF on the same eswitch, verify that the rule is for IP traffic
and source port rewrite functionality can be used.
- mlx5_esw_indir_table_decap_vport() - function returns decap vport of
flow attribute.
Co-developed-by: Dmytro Linkin <dlinkin@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Refactor tun routing helpers to use dedicated struct
mlx5e_tc_tun_route_attr instead of multiple output arguments. This
simplifies the callers (no need to keep track of bunch of output param
pointers) and allows to unify struct release code in new
mlx5e_tc_tun_route_attr_cleanup() helper instead of requiring callers to
manually release some of the output parameters that require it.
Simplify code by unifying error handling at the end of the function and
rearranging code. Remove redundant empty line.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When tunnel endpoint is on VF, driver still assumes that endpoint is on
uplink and incorrectly configures encap rule offload according to that
assumption. As a result, traffic is sent directly to the uplink and rules
installed on representor of tunnel endpoint VF are ignored.
Implement following changes to allow offloading tx traffic with tunnel
endpoint on VF:
- For tunneling flows perform route lookup on route and out devices pair.
If out device is uplink and route device is VF of same physical port, then
modify packet reg_c_0 metadata register (source port) with the value of VF
vport. Use eswitch vhca_id->vport mapping introduced in one of previous
patches in the series to obtain vport from route netdevice.
- Recirculate encapsulated packets to VF vport in order to apply any flow
rules installed on VF representor that match on encapsulated traffic.
Only enable support for this functionality when all following conditions
are true:
- Hardware advertises capability to preserve reg_c_0 value on packet
recirculation.
- Vport metadata matching is enabled.
- Termination tables are to be used by the flow.
Example TC rules for VF tunnel traffic:
1. Rule that redirects packets from UL to VF rep that has the tunnel
endpoint IP address:
$ tc -s filter show dev enp8s0f0 ingress
filter protocol ip pref 4 flower chain 0
filter protocol ip pref 4 flower chain 0 handle 0x1
dst_mac 16:c9:a0:2d:69:2c
src_mac 0c:42:a1:58:ab:e4
eth_type ipv4
ip_flags nofrag
in_hw in_hw_count 1
action order 1: mirred (Egress Redirect to device enp8s0f0_0) stolen
index 3 ref 1 bind 1 installed 377 sec used 0 sec
Action statistics:
Sent 114096 bytes 952 pkt (dropped 0, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 114096 bytes 952 pkt
backlog 0b 0p requeues 0
cookie 878fa48d8c423fc08c3b6ca599b50a97
no_percpu
used_hw_stats delayed
2. Rule that decapsulates the tunneled flow and redirects to destination VF
representor:
$ tc -s filter show dev vxlan_sys_4789 ingress
filter protocol ip pref 4 flower chain 0
filter protocol ip pref 4 flower chain 0 handle 0x1
dst_mac ca:2e:a7:3f:f5:0f
src_mac 0a:40:bd:30:89:99
eth_type ipv4
enc_dst_ip 7.7.7.5
enc_src_ip 7.7.7.1
enc_key_id 98
enc_dst_port 4789
enc_tos 0
ip_flags nofrag
in_hw in_hw_count 1
action order 1: tunnel_key unset pipe
index 2 ref 1 bind 1 installed 434 sec used 434 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
used_hw_stats delayed
action order 2: mirred (Egress Redirect to device enp8s0f0_1) stolen
index 4 ref 1 bind 1 installed 434 sec used 0 sec
Action statistics:
Sent 129936 bytes 1082 pkt (dropped 0, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 129936 bytes 1082 pkt
backlog 0b 0p requeues 0
cookie ac17cf398c4c69e4a5b2f7aabd1b88ff
no_percpu
used_hw_stats delayed
Co-developed-by: Dmytro Linkin <dlinkin@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Following patches in the series extend forwarding functionality with VF
tunnel TX and RX handling. Extract action forwarding processing code into
dedicated functions to simplify further extensions:
- Handle every forwarding case with dedicated function instead of inline
code.
- Extract forwarding dest dispatch conditional into helper function
esw_setup_dests().
- Unify forwaring cleanup code in error path of
mlx5_eswitch_add_offloaded_rule() and in rule deletion code of
__mlx5_eswitch_del_rule() in new helper function esw_cleanup_dests() (dual
to new esw_setup_dests() helper).
This patch does not change functionality.
Co-developed-by: Dmytro Linkin <dlinkin@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Eswitch offloads extensions in following patches in the series require
attr->esw_attr->in_mdev pointer to always be set. This is already the case
for all code paths except mlx5_tc_ct_entry_add_rule() function. Fix the
function to assign mdev pointer with priv->mdev value.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Following patches in the series need to be able to map VF netdev to vport.
Since it is trivial to obtain vhca_id from netdev, maintain mapping from
vhca_id to vport_num inside eswitch offloads using xarray. Provide function
mlx5_eswitch_vhca_id_to_vport() to be used by TC code in following patches
to obtain the mapping.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Setting the source port requires only the E-Switch and vport number.
Refactor the function to get those parameters instead of passing the full
attribute.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When disable CBS, mode_to_use parameter is not updated even the operation
mode of Tx Queue is changed to Data Centre Bridging (DCB). Therefore,
when tc_setup_cbs() function is called to re-enable CBS, the operation
mode of Tx Queue remains at DCB, which causing CBS fails to work.
This patch updates the value of mode_to_use parameter to MTL_QUEUE_DCB
after operation mode of Tx Queue is changed to DCB in stmmac_dma_qmode()
callback function.
Fixes: 1f705bc61aee ("net: stmmac: Add support for CBS QDISC")
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: Song, Yoong Siang <yoong.siang.song@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/1612447396-20351-1-git-send-email-yoong.siang.song@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The XDP frame's headroom might be large enough to accommodate the
xdpf backpointer as well as shifting the data to an aligned address.
Try this first before resorting to allocating a new buffer and copying
the data.
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 256 byte data alignment is required for preventing DMA transaction
splits when crossing 4K page boundaries. Since XDP deals only with page
sized buffers or less, this restriction isn't needed. Instead, the data
only needs to be aligned to 64 bytes to prevent DMA transaction splits.
These lessened restrictions can increase performance by widening the pool
of permitted data alignments and preventing unnecessary realignments.
Fixes: ae680bcbd06a ("dpaa_eth: implement the A050385 erratum workaround for XDP")
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the erratum workaround is triggered, the newly created xdp_frame
structure is stored at the start of the newly allocated buffer. Avoid
the structure from being overwritten by explicitly reserving enough
space in the buffer for storing it.
Account for the fact that the structure's size might increase in time by
aligning the headroom to DPAA_FD_DATA_ALIGNMENT bytes, thus guaranteeing
the data's alignment.
Fixes: ae680bcbd06a ("dpaa_eth: implement the A050385 erratum workaround for XDP")
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The check for a NULL pf pointer is moot since the earlier declaration and
assignment of struct device *dev already de-referenced the pointer. Also,
the only caller of ice_set_dflt_mib() already ensures pf is not NULL.
Cc: Dave Ertman <david.m.ertman@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Use the flex_array_size() helper with the recently added flexible array
members in structures.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in
struct ice_res_tracker, instead of a one-element array and use the
struct_size() helper to calculate the size for the allocations.
Also, notice that the code below suggests that, currently, two too many
bytes are being allocated with devm_kzalloc(), as the total number of
entries (pf->irq_tracker->num_entries) for pf->irq_tracker->list[] is
_vectors_ and sizeof(*pf->irq_tracker) also includes the size of the
one-element array _list_ in struct ice_res_tracker.
drivers/net/ethernet/intel/ice/ice_main.c:3511:
3511 /* populate SW interrupts pool with number of OS granted IRQs. */
3512 pf->num_avail_sw_msix = (u16)vectors;
3513 pf->irq_tracker->num_entries = (u16)vectors;
3514 pf->irq_tracker->end = pf->irq_tracker->num_entries;
With this change, the right amount of dynamic memory is now allocated
because, contrary to one-element arrays which occupy at least as much
space as a single object of the type, flexible-array members don't
occupy such space in the containing structure.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Built-tested-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Just as we recently added support for other stored firmware flash
versions, support display of the stored UNDI Option ROM version via
devlink info.
To do this, we need to introduce a new ice_get_inactive_orom_ver
function. This is a little trickier than with other flash versions. The
Option ROM version data was being read from a special "Boot
Configuration" block of the NVM Preserved Field Area. This block only
contains the *active* Option ROM version data. It is populated when the
device firmware finishes updating the Option ROM.
This method is ineffective at reading the stored Option ROM version
data. Instead of reading from this section of the flash, replace this
version extraction with one which locates the Combo Version information
from within the Option ROM binary.
This data is stored within the Option ROM at a 512 byte offset, in
a simple structured format. The structure uses a simple modulo 256
checksum for integrity verification. Scan through the Option ROM to
locate the CIVD data section, and extract the Combo Version.
Refactor ice_get_orom_ver_info so that it takes the bank select
enumeration parameter. Use this to implement ice_get_inactive_orom_ver.
Although all ice devices have a Boot Configuration block in the NVM PFA,
not all devices have a valid Option ROM. In this case, the old
ice_get_orom_ver_info would "succeed" but report a version of all
zeros. The new implementation would fail to locate the $CIV section in
the Option ROM and report an error. Thus, we must ensure that
ice_init_nvm does not fail if ice_get_orom_ver_info fails.
Use the new ice_get_inactive_orom_ver to allow reporting the Option ROM
versions for a pending update via devlink info.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add a function to read the inactive netlist bank for version
information. To support this, refactor how we read the netlist version
data. Instead of using the firmware AQ interface with a module ID, read
from the flash as a flat NVM, using ice_read_flash_module.
This change requires a slight adjustment to the offset values used, as
reading from the flat NVM includes the type field (which was stripped by
firmware previously). Cleanup the macro names and move them to
ice_type.h. For clarity in how we calculate the offsets and so that
programmers can easily map the offset value to the data sheet, use
a wrapper macro to account for the offset adjustments.
Use the newly added ice_get_inactive_netlist_ver function to extract the
version data from the pending netlist module update. Add the stored
variants of "fw.netlist", and "fw.netlist.build" to the info version map
array.
With this change, we now report the "fw.netlist" and "fw.netlist.build"
versions into the stored section of the devlink info report. As with the
main NVM module versions, if there is no pending update, we report the
currently active values as stored.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The devlink info interface supports drivers reporting "stored" versions.
These versions indicate the version of an update that has been
downloaded to the device, but is not yet active.
The code for extracting the NVM version recently changed to enable
support for reading from either the active or the inactive bank. Use
this to implement ice_get_inactive_nvm_ver, which will read the NVM
version data from the inactive section of flash.
When reporting the versions via devlink info, first read the device
capabilities. Determine if there is a pending flash update, and if so,
extract relevant version information from the inactive flash. Store
these within the info context structure.
When reporting "stored" firmware versions, devlink documentation
indicates that we ought to always report a stored value, even if there
is no pending update. In this common case, the stored version should
match the running version. This means that each stored version should by
default fallback to the same value as reported by the running handler.
To support this, modify the version structure to have both a "getter"
and a "fallback". Modify the control loop so that it will use the
"fallback" function if the "getter" function does not report a version.
To report versions for which we can read the stored value, use a new
"stored()" macro. This macro will insert two entries into the version
list. The first entry is the traditional running version. The second is
the stored version, implemented with a fallback to the active version.
This is a little tricky, but reduces the overall duplication of elements
in the entry list, and ensures that running and stored values remain
consistent.
To avoid some duplication, add a combined() macro that will insert both
the running and stored versions into the version entry list.
Using this new support, add pending version reporter functions for
"fw.psid.api" and "fw.bundle_id". This enables reporting the stored
values for some of versions in the NVM module of the flash.
Reporting management versions is not implemented by this patch. The
active management version is reported to the driver via the AdminQ
mailbox during load. Although the version must be in the firmware binary
somewhere, accessing this from the inactive firmware is not trivial and
has not been implemented in this change.
Future changes will introduce support for reading the UNDI Option ROM
version and the version associated with the Netlist module.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When reading from the flash memory of the device, the ice driver has two
interfaces available to it. First, it can use a mediated interface via
firmware that allows specifying a module ID. This allows reading from
specific modules of the active flash bank.
The second interface available is to perform flat reads. This allows
complete access to the entire flash. However, using it requires the
software to handle calculating module location and interpret pointer
addresses.
While most data required is accessible through the convenient first
interface, certain flash contents are not. This includes the CSS header
information associated with the Option ROM and NVM banks, as well as any
access to the "inactive" banks used as scratch space for performing
flash updates.
In order to access all of the relevant flash contents, software must use
the flat reads. Rather than forcing all flows to perform flat read
calculations, introduce a new abstraction for reading from the flash:
ice_read_flash_module. This function provides an abstraction for reading
from either the active or inactive flash bank at the requested module.
This interface is very similar to the abstraction provided via firmware,
but allows access to additional modules, as well as providing
a mechanism to request access to both flash banks.
At first glance, it might make sense for this abstraction to allow
specifying precisely which bank (1st or 2nd) the caller wishes to read.
This is simpler to implement but more difficult to use. In practice,
most callers only know whether they want the active bank, or the
inactive bank. Rather than force callers to determine for themselves
which bank to read from, implement ice_read_flash_module in terms of
"active" vs "inactive". This significantly simplifies the implementation
at the caller level and is a more useful abstraction over the flash
contents.
Make use of this new interface to refactor reading of the main NVM
version information. Instead of using the firmware's mediated ShadowRAM
function, use the ice_read_flash_module abstraction.
To do this, notice that most reads of the NVM are going to be in 2-byte
word chunks. To simplify using ice_read_flash_module for this case,
ice_read_nvm_module is introduced. This is a simple wrapper around
ice_read_flash_module which takes the correct pointer address for the
NVM bank, and forces the 2-byte word format onto the caller.
When reading the NVM versions, some fields are read from the Shadow RAM.
The Shadow RAM is the first 64KB of flash memory, and is populated
during device load. Most fields are copied from a section within the
active NVM bank. In order to read this data from both the active and
inactive NVM banks, we need to read not from the first 64KB of flash,
but instead from the correct offset into the NVM bank. Introduce
ice_read_nvm_sr_copy for this purpose. This function wraps around
ice_read_nvm_module and has the same interface as the ice_read_sr_word,
with the exception of allowing the caller to specify whether to read the
active or inactive flash bank.
With this change, it is now trivial to refactor ice_get_nvm_ver_info to
read using the software mediated ice_read_flash_module interface instead
of relying on the firmware mediated interface. This will be used in the
following change to implement support for stored versions in the devlink
info report.
Additionally, the overall ice_read_flash_module interface will be used
and extended to support all three major flash banks, and additionally to
support reading the flash image security revision information.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice flash contains two copies of each of the NVM, Option ROM, and
Netlist modules. Each bank has a pointer word and a size word. In order
to correctly read from the active flash bank, the driver must calculate
the offset manually.
During NVM initialization, read the Shadow RAM control word and
determine which bank is active for each NVM module. Additionally, cache
the size and pointer values for use in calculating the correct offset.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice driver uses an array of structures which link an info name with
a function that formats the associated version data into a string.
All existing format functions simply format already captured static data
from the driver hw structure. Future changes will introduce format
functions for reporting the versions of flash sections stored but not
yet applied. This type of version data is not stored as a member of the
hw structure. This is because (a) it might not yet exist in the case
there is no pending flash update, and (b) even if it does, it might
change such as if an update is canceled or replaced by a new update
before finalizing.
We could simply have each format function gather its own data upon being
called. However, in some cases the raw binary version data is
a combination of multiple different reported fields. Additionally, the
current interface doesn't have a way for the function to indicate that
the version doesn't exist.
Refactor this function interface to take a new ice_info_ctx structure
instead of the buffer pointer and length. This context structure allows
for future extensions to pre-gather version data that is stored within
the context struct instead of the hw struct.
Allocate this context structure initially at the start of
ice_devlink_info_get. We use dynamic allocation instead of a local stack
variable in order to avoid using too much kernel stack once we extend it
with additional data structures.
Modify the main loop that drives the info reporting so that the version
buffer string is always cleared between each format. Explicitly check
that the format function actually filled in a version string of non-zero
length. If the string is not provided, simply skip this version without
reporting an error. This allows for introducing format functions of
versions which may or may not be present, such as the version of
a pending update that has not yet been activated.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice_nvm_info structure has become somewhat of a dumping ground for
all of the fields related to flash version. It holds the NVM version and
EETRACK id, the OptionROM info structure, the flash size, the ShadowRAM
size, and more.
A future change is going to add the ability to read the NVM version and
EETRACK ID from the inactive NVM bank. To make this simpler, it is
useful to have these NVM version info fields extracted to their own
structure.
Rename ice_nvm_info into ice_flash_info, and create a separate
ice_nvm_info structure that will contain the eetrack and NVM map
version. Move the netlist_ver structure into ice_flash_info and rename it
ice_netlist_info for consistency.
Modify the static ice_get_orom_ver_info to take the option rom structure
as a pointer. This makes it more obvious what portion of the hw struct
is being modified. Do the same for ice_get_netlist_ver_info.
Introduce a new ice_get_nvm_ver_info function, which will be similar to
ice_get_orom_ver_info and ice_get_netlist_ver_info, used to keep the NVM
version extraction code co-located.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Pull vdpa fix from Michael Tsirkin:
"A bugfix in the mlx driver I got at the last minute"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/mlx5: Restore the hardware used index after change map
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Limit retries when analyse of SDIO tuples fails
MMC host:
- sdhci: Fix linking err for sdhci-brcmstb"
* tag 'mmc-v5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pltfm: Fix linking err for sdhci-brcmstb
mmc: core: Limit retries when analyse of SDIO tuples fails
|
|
Pull drm fixes from Dave Airlie:
"Fixes for rc7, bit bigger than I'd like at this stage, but most of the
i915 stuff and some amdgpu is destined for staging and I'd rather not
hold it up, the i915 changes also pulled in a few precusor code
movement patches to make things cleaner, but nothing seems that
horrible, and I've checked over all of it.
Otherwise there is a nouveau dma-api warning regression, and a ttm
page allocation warning fix, and some fixes for a bridge chip,
ttm:
- fix huge page warning regression
i915:
- Skip vswing programming for TBT
- Power up combo PHY lanes for HDMI
- Fix double YUV range correction on HDR planes
- Fix the MST PBN divider calculation
- Fix LTTPR vswing/pre-emp setting in non-transparent mode
- Move the breadcrumb to the signaler if completed upon cancel
- Close race between enable_breadcrumbs and cancel_breadcrumbs
- Drop lru bumping on display unpinning
amdgpu:
- Fix retry in gem create
- Vangogh fixes
- Fix for display from shared buffers
- Various display fixes
amdkfd:
- Fix regression in buffer free
nouveau:
- fix DMA API warning regression
drm/bridge/lontium-lt9611uxc:
- EDID fixes
- Don't handle hotplug events in IRQ handler"
* tag 'drm-fixes-2021-02-05-1' of git://anongit.freedesktop.org/drm/drm: (29 commits)
drm/nouveau: fix dma syncing warning with debugging on.
drm/amd/display: Decrement refcount of dc_sink before reassignment
drm/amd/display: Free atomic state after drm_atomic_commit
drm/amd/display: Fix dc_sink kref count in emulated_link_detect
drm/amd/display: Release DSC before acquiring
drm/amd/display: Revert "Fix EDID parsing after resume from suspend"
drm/amd/display: Add more Clock Sources to DCN2.1
drm/amd/display: reuse current context instead of recreating one
drm/amd/display: Fix DPCD translation for LTTPR AUX_RD_INTERVAL
drm/amdgpu: enable freesync for A+A configs
drm/amd/pm: fill in the data member of v2 gpu metrics table for vangogh
drm/amdgpu/gfx10: update CGTS_TCC_DISABLE and CGTS_USER_TCC_DISABLE register offsets for VGH
drm/amdkfd: fix null pointer panic while free buffer in kfd
drm/amdgpu: fix the issue that retry constantly once the buffer is oversize
drm/i915/dp: Fix LTTPR vswing/pre-emp setting in non-transparent mode
drm/i915/dp: Move intel_dp_set_signal_levels() to intel_dp_link_training.c
drm/i915: Fix the MST PBN divider calculation
drm/dp/mst: Export drm_dp_get_vc_payload_bw()
drm/i915/gem: Drop lru bumping on display unpinning
drm/i915/gt: Close race between enable_breadcrumbs and cancel_breadcrumbs
...
|
|
When erasing, notify userspace of how long we will potentially take to
erase a module. Doing so allows userspace to report the timeout, giving
a clear indication of the upper time bound of the operation.
Since we're re-using the erase timeout value, make it a macro rather
than a magic number.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When a change of memory map occurs, the hardware resources are destroyed
and then re-created again with the new memory map. In such case, we need
to restore the hardware available and used indices. The driver failed to
restore the used index which is added here.
Also, since the driver also fails to reset the available and used
indices upon device reset, fix this here to avoid regression caused by
the fact that used index may not be zero upon device reset.
Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210204073618.36336-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Eliminate the following coccicheck warning:
./drivers/acpi/apei/erst.c:691:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
