| Age | Commit message (Collapse) | Author |
|---|
|
Core rc keeps track of the users - let's use it to tweak the code and
use the common code path on suspend/resume.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
It appears that we need to enable CIR device before attempting to touch
some of the registers. Previously, this was not a big issue, since we
were rarely seeing nvt_close() getting called.
Unfortunately, since commit cb84343fced1 ("media: lirc: do not call close()
or open() on unregistered devices") the initial open() during probe from
rc_setup_rx_device() is no longer successful, which means that userspace
clients will actually end up calling nvt_open()/nvt_close(). Since
nvt_open() is broken, the device doesn't seem to work as expected.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199597
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
media: uvcvideo: Support UVC 1.5 video probe & commit controls
The length of UVC 1.5 video control is 48, and it is 34 for UVC 1.1.
Change it to 48 for UVC 1.5 device, and the UVC 1.5 device can be
recognized.
More changes to the driver are needed for full UVC 1.5 compatibility.
However, at least the UVC 1.5 Realtek RTS5847/RTS5852 cameras have been
reported to work well.
[laurent.pinchart@ideasonboard.com: Factor out code to helper function, update size checks]
Cc: stable@vger.kernel.org
Signed-off-by: ming_qian <ming_qian@realsil.com.cn>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Ana Guerrero Lopez <ana.guerrero@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Kernel library has a common function to match user input from sysfs
against an array of strings. Thus, replace bch_read_string_list() by
__sysfs_match_string().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is couple of functions that are used exclusively in sysfs.c.
Move it to there and make them static.
Besides above, it will allow further clean up.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is couple of string arrays that are used exclusively in sysfs.c.
Move it to there and make them static.
Besides above, it will allow further clean up.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently bcache does not handle backing device failure, if backing
device is offline and disconnected from system, its bcache device can still
be accessible. If the bcache device is in writeback mode, I/O requests even
can success if the requests hit on cache device. That is to say, when and
how bcache handles offline backing device is undefined.
This patch tries to handle backing device offline in a rather simple way,
- Add cached_dev->status_update_thread kernel thread to update backing
device status in every 1 second.
- Add cached_dev->offline_seconds to record how many seconds the backing
device is observed to be offline. If the backing device is offline for
BACKING_DEV_OFFLINE_TIMEOUT (30) seconds, set dc->io_disable to 1 and
call bcache_device_stop() to stop the bache device which linked to the
offline backing device.
Now if a backing device is offline for BACKING_DEV_OFFLINE_TIMEOUT seconds,
its bcache device will be removed, then user space application writing on
it will get error immediately, and handler the device failure in time.
This patch is quite simple, does not handle more complicated situations.
Once the bcache device is stopped, users need to recovery the backing
device, register and attach it manually.
Changelog:
v3: call wait_for_kthread_stop() before exits kernel thread.
v2: remove "bcache: " prefix when calling pr_warn().
v1: initial version.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
kref_init initializes the reference count to 1, not 0. This additional
reference is never released since the conversion to reference counters.
As a result, uvc_delete is not called anymore when UVC cameras are
disconnected.
Fix this by adding an additional kref_put in uvc_disconnect and in the
probe error path. This also allows to remove the temporary additional
reference in uvc_unregister_video.
Fixes: 9d15cd958c17 ("media: uvcvideo: Convert from using an atomic variable to a reference count")
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The 50Hz and 60Hz power line frequency settings disable short (1/120s
and 1/100s) exposure times for banding filter (causing overexposed
image near lamps). No flicker setting enables them (when banding
filter is disabled and they're not used).
Seems that the logic is just the wrong way around.
(This bug came from the Windows driver.)
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Power line frequency settings for OV7648 sensor contain autogain
and exposure commands, affecting unrelated controls. Remove them.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The ZS0211 internal autogain causes pumping and flickering with OV7648
sensor on 0ac8:307b webcam.
Implement OV7648 autogain and exposure control and use that instead.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The ioctl serialization mutex (vdev->lock or q->lock for vb2 queues)
was taken at the highest level in v4l2-dev.c. This prevents more
fine-grained locking since at that level we cannot examine the ioctl
arguments, we can only do that after video_usercopy is called.
So push the locking down to __video_do_ioctl() and subdev_do_ioctl_lock().
This also allows us to make a few functions in v4l2-ioctl.c static and
video_usercopy() is no longer exported.
The locking scheme is not changed by this patch, just pushed down.
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
This driver is the only V4L driver that does not set unlocked_ioctl
to video_ioctl2.
The only thing that pvr2_v4l2_ioctl does besides calling video_ioctl2
is calling pvr2_hdw_commit_ctl(). Add pvr2_hdw_commit_ctl() calls to
the various ioctls that need this, and we can replace pvr2_v4l2_ioctl
by video_ioctl2.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
This code has been there for nine years now, and it has been
working "good enough" since then [1].
Remove duplicate code by getting rid of the if-else statement.
[1] https://marc.info/?l=linux-kernel&m=152693550225081&w=2
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
If a CEC message was received and the RX interrupt was set, but
not yet processed, and a new transmit was issues, then the
transmit code would inadvertently clear the RX interrupt and
after that no new messages would ever be received.
Instead it should only clear TX interrupts since register 0x97
is a clear-on-write register.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
When a message was canceled it could return tx_status with
both OK and MAX_RETRIES set, which is illegal.
If a canceled message was waiting for a reply, then rx_status
wasn't updated, so set that as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Trivial fix to spelling mistake in name field
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The open() operation for the pxa_camera driver always calls s_power()
operation to put its subdevice sensor in normal operation mode, and the
release() operation always call s_power() operation to put the subdevice
in power saving mode.
This requires the subdevice sensor driver to keep track of its power
state in order to avoid putting the subdevice in power saving mode while
the device is still opened by some users.
Many subdevice drivers handle it by the boilerplate code that increments
and decrements an internal counter in s_power() like below:
/*
* If the power count is modified from 0 to != 0 or from != 0 to 0,
* update the power state.
*/
if (sensor->power_count == !on) {
ret = ov5640_set_power(sensor, !!on);
if (ret)
goto out;
}
/* Update the power count. */
sensor->power_count += on ? 1 : -1;
However, some subdevice drivers don't handle it and may cause a problem
with the pxa_camera driver if the video device is opened by more than
two users at the same time.
Instead of propagating the boilerplate code for each subdevice driver
that implement s_power, this introduces an trick that many V4L2 drivers
are using with v4l2_fh_is_singular_file().
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
DMA requests must be blocked before resetting VDE HW, otherwise it is
possible to get a memory corruption or a machine hang. Use the reset
control provided by the Memory Controller to block DMA before resetting
the VDE HW.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
When the driver is configured in the "memcpy" dma-mode,
it uses vb2_vmalloc_memops, which is backed by a SLAB
allocator and so shouldn't be using GFP_DMA32.
Fix it.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The DMA engine subsystem provides stubs for drivers
to build with !DMA_ENGINE. Drop the config dependency.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The mutexes are not being destroyed in the release path. Fix it.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Fix a trivial typo.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.
Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.
This simplifies the dependencies, and allows to improve compile-testing.
Note:
- The various VIDEOBUF*DMA* symbols had to loose their dependencies on
HAS_DMA, as they are selected by several individual drivers.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
If we pick a very large "edid->blocks" value then the "edid->start_block
+ edid->blocks" addition could wrap around.
Fixes: ef834f7836ec ("[media] vivid: add the video capture and output parts")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The current logic makes Smatch to false-detect a Spectre variant 1
vulnerability. The problem is that it initializes an u32 indirectly
from user space input.
After trying to write a fixup, after a while I realized that, in
practice, this shouldn't be a problem, as an u32 is initialized
from u8, but it took some time to discover it.
So, do some code cleanup to make it clearer for both humans
and machines about the valid range for "op".
Fix this warning:
drivers/media/cec/cec-pin-error-inj.c:170 cec_pin_error_inj_parse_line() warn: potential spectre issue 'pin->error_inj_args'
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Some subdrivers access the gspca_dev->urb array in the completion handler.
To prevent use-after-free (actually, NULL dereferences) we need to
synchronously kill all the URBs before we release them.
In particular, this is currently the case for drivers such
as sn9c20x and sonixj, which access the gspca_dev->urb[0]
in the context of completion handler for *any* of the URBs.
This commit changes the destroy_urb implementation, so it kills
all URBs first, and then proceed to set the URBs to NULL in the
array and release them.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Fix v4l2-compliance error: s_parm never set V4L2_CAP_TIMEPERFRAME.
Also various g/s_parm-related cleanups.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The last user of this 'feature' was the gspca driver. Now that
that driver has been converted to vb2 we can delete this code.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Zero the reserved capture/output array.
Zero the extendedmode (it is never used in drivers).
Clear all flags in capture/outputmode except for V4L2_MODE_HIGHQUALITY,
as that is the only valid flag.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The gspca core has its own buffere implementation. Use the
core VB 2 instead.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
When a buffer is queued or requeued in vb2_buffer_done, then don't
call the finish memop. In this case the buffer is only returned to vb2,
not to userspace.
Calling 'finish' here will cause an unbalance when the queue is
canceled, since the core will call the same memop again.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The banding filter ON/OFF is controlled via bit 5 of COM8 register. It
is attempted to be enabled in ov772x_set_params() by the following line.
ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, 1);
But this unexpectedly results disabling the banding filter, because the
mask and set bits are exclusive.
On the other hand, ov772x_s_ctrl() correctly sets the bit by:
ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, BNDF_ON_OFF);
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
drivers/media/i2c/imx258.c: In function 'imx258_init_controls':
drivers/media/i2c/imx258.c:1117:6: warning: variable 'exposure_max' set but not used [-Wunused-but-set-variable]
s64 exposure_max;
^~~~~~~~~~~~
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Add a V4L2 sub-device driver for the Sony IMX258 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.
Signed-off-by: Jason Chen <jasonx.z.chen@intel.com>
Signed-off-by: Andy Yeh <andy.yeh@intel.com>
Signed-off-by: Alan Chiang <alanx.chiang@intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Instead of failing the set_fmt() if a unsupported format is requested
set a default one and return the changed format to the user.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reported-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
A V4L2 driver for Renesas R-Car MIPI CSI-2 receiver. The driver
supports the R-Car Gen3 SoCs where separate CSI-2 hardware blocks are
connected between the video sources and the video grabbers (VIN).
Driver is based on a prototype by Koji Matsuoka in the Renesas BSP.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma for-next
Update mlx4 to support user MR creation against read-only memory, previously
it required the memory to be writable.
Based on rdma for-rc due to dependencies.
* mr_fix: (2 commits)
IB/mlx4: Mark user MR as writable if actual virtual memory is writable
IB/core: Make testing MR flags for writability a static inline function
|
|
To allow rereg_user_mr to modify the MR from read-only to writable without
using get_user_pages again, we needed to define the initial MR as writable.
However, this was originally done unconditionally, without taking into
account the writability of the underlying virtual memory.
As a result, any attempt to register a read-only MR over read-only
virtual memory failed.
To fix this, do not add the writable flag bit when the user virtual memory
is not writable (e.g. const memory).
However, when the underlying memory is NOT writable (and we therefore
do not define the initial MR as writable), the IB core adds a
"force writable" flag to its user-pages request. If this succeeds,
the reg_user_mr caller gets a writable copy of the original pages.
If the user-space caller then does a rereg_user_mr operation to enable
writability, this will succeed. This should not be allowed, since
the original virtual memory was not writable.
Cc: <stable@vger.kernel.org>
Fixes: 9376932d0c26 ("IB/mlx4_ib: Add support for user MR re-registration")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
|
|
Make the MR writability flags check, which is performed in umem.c,
a static inline function in file ib_verbs.h
This allows the function to be used by low-level infiniband drivers.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
|
|
The function rxe_remove_all is only used in this modules.
There is no other modules that call this function. So it
is not necessary to export it.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Several subsystems depend on INFINIBAND_ADDR_TRANS, which in turn depends
on INFINIBAND. However, when with CONFIG_INIFIBAND=m, this leads to a
link error when another driver using it is built-in. The
INFINIBAND_ADDR_TRANS dependency is insufficient here as this is
a 'bool' symbol that does not force anything to be a module in turn.
fs/cifs/smbdirect.o: In function `smbd_disconnect_rdma_work':
smbdirect.c:(.text+0x1e4): undefined reference to `rdma_disconnect'
net/9p/trans_rdma.o: In function `rdma_request':
trans_rdma.c:(.text+0x7bc): undefined reference to `rdma_disconnect'
net/9p/trans_rdma.o: In function `rdma_destroy_trans':
trans_rdma.c:(.text+0x830): undefined reference to `ib_destroy_qp'
trans_rdma.c:(.text+0x858): undefined reference to `ib_dealloc_pd'
Fixes: 9533b292a7ac ("IB: remove redundant INFINIBAND kconfig dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Limiting the dma mask to avoid PCI (pre-PCIe) DAC cycles while paying
the huge overhead of an IOMMU is rather pointless, and this seriously
gets in the way of dma mapping work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
|
|
match_string() returns the index of an array for a matching string,
which can be used intead of open coded variant.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hu Ziji <huziji@marvell.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-mmc@vger.kernel.org
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Smatch identifies i915_query_ioctl() as being a potential victim of
Spectre due to its use of a tainted user index into a function pointer
array. Use array_index_nospec() to defang the user index before using it
to lookup the function pointer.
Fixes: a446ae2c6e65 ("drm/i915: add query uAPI")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180521210530.26008-1-chris@chris-wilson.co.uk
(cherry picked from commit 84b510e22da7926522a257cfe295d3695346a0bd)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Delay registering ourselves with the acpi lid notification mechanism
until we are registering the connectors after initialisation is
complete. This prevents a possibility of trying to handle the lid
notification before we are ready with the danger of chasing
uninitialised function pointers.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
IP: (null)
PGD 0 P4D 0
Oops: 0010 [#1] PREEMPT SMP PTI
Modules linked in: arc4(+) iwldvm(+) i915(+) mac80211 i2c_algo_bit coretemp mei_wdt iwlwifi drm_kms_helper kvm_intel wmi_bmof iTCO_wdt iTCO_vendor_support kvm snd_hda_codec_conexant snd_hda_codec_generic drm psmouse cfg80211 irqbypass input_leds pcspkr i2c_i801 snd_hda_intel snd_hda_codec thinkpad_acpi snd_hda_core mei_me lpc_ich snd_hwdep e1000e wmi nvram snd_pcm mei snd_timer shpchp ptp pps_core rfkill syscopyarea snd intel_agp sysfillrect intel_gtt soundcore sysimgblt battery led_class fb_sys_fops ac rtc_cmos agpgart evdev mac_hid acpi_cpufreq ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 fscrypto crypto_simd glue_helper cryptd aes_x86_64 xts algif_skcipher af_alg dm_crypt dm_mod sd_mod uas usb_storage serio_raw atkbd libps2 ahci libahci uhci_hcd libata scsi_mod ehci_pci
ehci_hcd usbcore usb_common i8042 serio
CPU: 1 PID: 378 Comm: systemd-logind Not tainted 4.16.8-1-ARCH #1
Hardware name: LENOVO 7454CTO/7454CTO, BIOS 6DET72WW (3.22 ) 10/25/2012
RIP: 0010: (null)
RSP: 0018:ffffaf4580c33a18 EFLAGS: 00010287
RAX: 0000000000000000 RBX: ffff947533558000 RCX: 000000000000003e
RDX: ffffffffc0aa80c0 RSI: ffffaf4580c33a3c RDI: ffff947534e4c000
RBP: ffff947533558338 R08: ffff947534598930 R09: ffffffffc0a928b1
R10: ffffd8f181d5fd40 R11: 0000000000000000 R12: ffffffffc0a928b1
R13: ffff947533558368 R14: ffffffffc0a928a9 R15: ffff947534e4c000
FS: 00007f3dc4ddb940(0000) GS:ffff947539280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000006e214000 CR4: 00000000000406e0
Call Trace:
? intel_modeset_setup_hw_state+0x385/0xf60 [i915]
? __intel_display_resume+0x1e/0xc0 [i915]
? intel_display_resume+0xcc/0x120 [i915]
? intel_lid_notify+0xbc/0xc0 [i915]
? notifier_call_chain+0x47/0x70
? blocking_notifier_call_chain+0x3e/0x60
? acpi_lid_notify_state+0x8f/0x1d0
? acpi_lid_update_state+0x49/0x70
? acpi_lid_input_open+0x60/0x90
? input_open_device+0x5d/0xa0
? evdev_open+0x1ba/0x1e0 [evdev]
? chrdev_open+0xa3/0x1b0
? cdev_put.part.0+0x20/0x20
? do_dentry_open+0x14c/0x300
? path_openat+0x30c/0x1240
? current_time+0x16/0x60
? do_filp_open+0x93/0x100
? __check_object_size+0xfb/0x180
? do_sys_open+0x186/0x210
? do_syscall_64+0x74/0x190
? entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Code: Bad RIP value.
RIP: (null) RSP: ffffaf4580c33a18
CR2: 0000000000000000
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106559
Fixes: c1c7af608920 ("drm/i915: force mode set at lid open time")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180518074840.16194-1-chris@chris-wilson.co.uk
Cc: stable@vger.kernel.org
(cherry picked from commit e578a570dc7c20475774d1ff993825e3bd7a7011)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Radiant P845 does not have LVDS, only VGA.
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105468
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180309222204.4771-1-linux@rainbow-software.org
(cherry picked from commit 7f7105f99b75aca4f8c2a748ed6b82c7f8be3293)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
non-leaks
In kernel 4.17.0-rcX, kmemleak reports 9 leaks with tracebacks similar to
the following:
unreferenced object 0xffff880224a077e0 (size 72):
comm "swapper/0", pid 1, jiffies 4294892358 (age 1022.636s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 0e 01 01 00 00 00 00 01 ................
00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000004f506615>] acpi_ut_create_internal_object_dbg+0x4d/0x10e
[<000000006e7730e3>] acpi_ds_build_internal_object+0xed/0x1cd
[<00000000272b7c73>] acpi_ds_build_internal_package_obj+0x245/0x3a2
[<000000000b64c50e>] acpi_ds_eval_data_object_operands+0x17b/0x21b
[<00000000589647ac>] acpi_ds_exec_end_op+0x433/0x6c1
[<000000001d69bcbf>] acpi_ps_parse_loop+0x926/0x9be
[<000000005d6fa97d>] acpi_ps_parse_aml+0x1a2/0x4af
[<00000000c4bef823>] acpi_ps_execute_table+0xbb/0x119
[<00000000fd9632e4>] acpi_ns_execute_table+0x20c/0x260
[<00000000e6ae17ac>] acpi_ns_parse_table+0x7d/0x1b3
[<0000000008e1e148>] acpi_ns_load_table+0x8d/0x1c0
[<000000009fc8346f>] acpi_tb_load_namespace+0x176/0x278
[<0000000073f98b3b>] acpi_load_tables+0x6e/0xfd
[<00000000d2ef13d2>] acpi_init+0x8c/0x340
[<000000007da19d8d>] do_one_initcall+0x46/0x1fa
[<0000000024681a1d>] kernel_init_freeable+0x1a2/0x237
According to gdb, the offending code is
object =
acpi_ut_allocate_object_desc_dbg(module_name, line_number,
component_id);
As it is not possible to unload the ACPI code to test that this is a real
leak and not a false positive, and that only these 9 appear no matter how
long the system is up, a kmemleak_not_leak(object) call is inserted.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In the case consumer device is runtime resumed, while the link to the
supplier is removed, the earlier call to pm_runtime_get_sync() made from
rpm_get_suppliers() does not get properly balanced with a corresponding
call to pm_runtime_put(). This leads to that suppliers remains to be
runtime resumed forever, while they don't need to.
Let's fix the behaviour by calling rpm_put_suppliers() when dropping a
device link. Not that, since rpm_put_suppliers() checks the
link->rpm_active flag, we can correctly avoid to call pm_runtime_put() in
cases when we shouldn't.
Reported-by: Todor Tomov <todor.tomov@linaro.org>
Fixes: 21d5c57b3726 (PM / runtime: Use device links)
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In the driver core, before it invokes really_probe() it runtime resumes the
suppliers for the device via calling pm_runtime_get_suppliers(), which also
increases the runtime PM usage count for each of the available supplier.
This makes sense, as to be able to allow the consumer device to be probed
by its driver. However, if the driver decides to add a new supplier link
during ->probe(), hence updating the list of suppliers, the following call
to pm_runtime_put_suppliers(), invoked after really_probe() in the driver
core, we get into trouble.
More precisely, pm_runtime_put() gets called also for the new supplier(s),
which is wrong as the driver core, didn't trigger pm_runtime_get_sync() to
be called for it in the first place. In other words, the new supplier may
be runtime suspended even in cases when it shouldn't.
Fix this behaviour, by runtime resume suppliers according to the same
conditions as managed by the runtime PM core, when runtime resume callbacks
are being invoked.
Additionally, don't try to runtime suspend any of the suppliers after
really_probe(), but instead rely on that to happen via the consumer device,
when it becomes runtime suspended.
Fixes: 21d5c57b3726 (PM / runtime: Use device links)
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
