| Age | Commit message (Collapse) | Author |
|---|
|
Issue:
When PEC is enabled, binding adm1272 to the adm1275 would
fail due to PEC error. See below:
adm1275: probe of xxxx failed with error -74
Diagnosis:
Per the datasheet of adm1272, adm1278, adm1293 and amd1294,
PMON_CONFIG (0xd4) is 16bits wide. On the other hand,
PMON_CONFIG (0xd4) for adm1275 is 8bits wide. The driver should not
assume everything is 8bits wide and read only 8bits from it.
Solution:
If it is adm1272, adm1278, adm1293 and adm1294, use i2c_read_word.
Else, use i2c_read_byte
Testing:
Binding adm1272 to the driver.
The change is only tested on adm1272.
Signed-off-by: Chu Lin <linchuyuan@google.com>
Link: https://lore.kernel.org/r/20200709040612.3977094-1-linchuyuan@google.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This reverts commit 5435f73d5c4a1b75, which is no longer needed now
that the minimum GCC version has been bumped to v4.9
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Commit
bf67fad19e493b ("efi: Use more granular check for availability for variable services")
introduced a check into the efivarfs, efi-pstore and other drivers that
aborts loading of the module if not all three variable runtime services
(GetVariable, SetVariable and GetNextVariable) are supported. However, this
results in efivarfs being unavailable entirely if only SetVariable support
is missing, which is only needed if you want to make any modifications.
Also, efi-pstore and the sysfs EFI variable interface could be backed by
another implementation of the 'efivars' abstraction, in which case it is
completely irrelevant which services are supported by the EFI firmware.
So make the generic 'efivars' abstraction dependent on the availibility of
the GetVariable and GetNextVariable EFI runtime services, and add a helper
'efivar_supports_writes()' to find out whether the currently active efivars
abstraction supports writes (and wire it up to the availability of
SetVariable for the generic one).
Then, use the efivar_supports_writes() helper to decide whether to permit
efivarfs to be mounted read-write, and whether to enable efi-pstore or the
sysfs EFI variable interface altogether.
Fixes: bf67fad19e493b ("efi: Use more granular check for availability for variable services")
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Add a missing spinlock protection for play_queue, because
the play_queue may be destroyed when the "playback_work"
work func and "f_audio_out_ep_complete" callback func
operate this paly_queue at the same time.
Fixes: c6994e6f067cf ("USB: gadget: add USB Audio Gadget driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Zhang Qiang <qiang.zhang@windriver.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
Fixed commit moved the assignment of 'req', but did not update a
reference in the DBG() call. Use the argument as it was renamed.
Fixes: 5fb694f96e7c ("usb: gadget: udc: atmel: fix possible oops when unloading module")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
Fixed commit removed the offending behaviour from the driver, but missed
the comment and associated test. Remove them now.
Fixes: 38e58986e6fc ("usb: gadget: udc: atmel: don't disable enpdoints we don't own")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
To avoid lot of interrupts from dwc2 core, which can be asserted in
specific conditions need to disable interrupts on HW level instead of
disable IRQs on Kernel level, because of IRQ can be shared between
drivers.
Cc: stable@vger.kernel.org
Fixes: a40a00318c7fc ("usb: dwc2: add shutdown callback to platform variant")
Tested-by: Frank Mori Hess <fmh6jj@gmail.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Frank Mori Hess <fmh6jj@gmail.com>
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
It is found by sparse.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
It is found by sparse.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
gr_ep_init() does not assign the allocated request anywhere if allocation
of memory for the buffer fails. This is a memory leak fixed by the given
patch.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
Fix spelling of the 'langid' function argument in the kernel-doc
notation to quieten a kernel-doc warning.
../drivers/usb/gadget/usbstring.c:77: warning: Function parameter or member 'langid' not described in 'usb_validate_langid'
../drivers/usb/gadget/usbstring.c:77: warning: Excess function parameter 'lang' description in 'usb_validate_langid'
Fixes: 17309a6a4356 ("usb: gadget: add "usb_validate_langid" function")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Tao Ren <rentao.bupt@gmail.com>
Cc: Tao Ren <rentao.bupt@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
This patch adds the necessary PCI ID for Intel Jasper Lake
devices.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
This patch adds the necessary PCI ID for TGP-H devices.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
The following backtrace is seen when running aspeed G5 kernels.
WARNING: CPU: 0 PID: 1 at drivers/gpu/drm/drm_fb_helper.c:2233 drm_fbdev_generic_setup+0x138/0x198
aspeed_gfx 1e6e6000.display: Device has not been registered.
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc3 #1
Hardware name: Generic DT based system
Backtrace:
[<8010d6d0>] (dump_backtrace) from [<8010d9b8>] (show_stack+0x20/0x24)
r7:00000009 r6:60000153 r5:00000000 r4:8119fa94
[<8010d998>] (show_stack) from [<80b8cb98>] (dump_stack+0xcc/0xec)
[<80b8cacc>] (dump_stack) from [<80123ef0>] (__warn+0xd8/0xfc)
r7:00000009 r6:80e62ed0 r5:00000000 r4:974c3ccc
[<80123e18>] (__warn) from [<80123f98>] (warn_slowpath_fmt+0x84/0xc4)
r9:00000009 r8:806a0140 r7:000008b9 r6:80e62ed0 r5:80e631f8 r4:974c2000
[<80123f18>] (warn_slowpath_fmt) from [<806a0140>] (drm_fbdev_generic_setup+0x138/0x198)
r9:00000001 r8:9758fc10 r7:9758fc00 r6:00000000 r5:00000020 r4:9768a000
[<806a0008>] (drm_fbdev_generic_setup) from [<806d4558>] (aspeed_gfx_probe+0x204/0x32c)
r7:9758fc00 r6:00000000 r5:00000000 r4:9768a000
[<806d4354>] (aspeed_gfx_probe) from [<806dfca0>] (platform_drv_probe+0x58/0xa8)
Since commit 1aed9509b29a6 ("drm/fb-helper: Remove return value from
drm_fbdev_generic_setup()"), drm_fbdev_generic_setup() must be called
after drm_dev_register() to avoid the warning. Do that.
Fixes: 1aed9509b29a6 ("drm/fb-helper: Remove return value from drm_fbdev_generic_setup()")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701001002.74997-1-linux@roeck-us.net
|
|
The prototype of the functions handle_kernel_image & efi_enter_kernel
are defined in efi-stub.c which may result in a compiler warnings if
-Wmissing-prototypes is set in gcc compiler.
Move the prototype to efistub.h to make the compiler happy.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Link: https://lore.kernel.org/r/20200706172609.25965-2-atish.patra@wdc.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
32bit gcc doesn't support modulo operation on 64 bit data. It results in
a __umoddi3 error while building EFI for 32 bit.
Use bitwise operations instead of modulo operations to fix the issue.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Link: https://lore.kernel.org/r/20200625234516.31406-2-atish.patra@wdc.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
As of commit 8c0637e950d6 ("keys: Make the KEY_NEED_* perms an enum rather
than a mask") lookup_user_key() needs an explicit declaration of what it
wants to do with the key. Add KEY_NEED_SEARCH to fix a warning with the
below signature, and fixes the inability to retrieve a key.
WARNING: CPU: 15 PID: 6276 at security/keys/permission.c:35 key_task_permission+0xd3/0x140
[..]
RIP: 0010:key_task_permission+0xd3/0x140
[..]
Call Trace:
lookup_user_key+0xeb/0x6b0
? vsscanf+0x3df/0x840
? key_validate+0x50/0x50
? key_default_cmp+0x20/0x20
nvdimm_get_user_key_payload.part.0+0x21/0x110 [libnvdimm]
nvdimm_security_store+0x67d/0xb20 [libnvdimm]
security_store+0x67/0x1a0 [libnvdimm]
kernfs_fop_write+0xcf/0x1c0
vfs_write+0xde/0x1d0
ksys_write+0x68/0xe0
do_syscall_64+0x5c/0xa0
entry_SYSCALL_64_after_hwframe+0x49/0xb3
Fixes: 8c0637e950d6 ("keys: Make the KEY_NEED_* perms an enum rather than a mask")
Suggested-by: David Howells <dhowells@redhat.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/159297332630.1304143.237026690015653759.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
ib_pd is accessed internally during destroy of the TIR/TIS, but PD
can be not set yet. This leading to the following kernel panic.
BUG: kernel NULL pointer dereference, address: 0000000000000074
PGD 8000000079eaa067 P4D 8000000079eaa067 PUD 7ae81067 PMD 0 Oops: 0000 [#1] SMP PTI
CPU: 1 PID: 709 Comm: syz-executor.0 Not tainted 5.8.0-rc3 #41 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
RIP: 0010:destroy_raw_packet_qp_tis drivers/infiniband/hw/mlx5/qp.c:1189 [inline]
RIP: 0010:destroy_raw_packet_qp drivers/infiniband/hw/mlx5/qp.c:1527 [inline]
RIP: 0010:destroy_qp_common+0x2ca/0x4f0 drivers/infiniband/hw/mlx5/qp.c:2397
Code: 00 85 c0 74 2e e8 56 18 55 ff 48 8d b3 28 01 00 00 48 89 ef e8 d7 d3 ff ff 48 8b 43 08 8b b3 c0 01 00 00 48 8b bd a8 0a 00 00 <0f> b7 50 74 e8 0d 6a fe ff e8 28 18 55 ff 49 8d 55 50 4c 89 f1 48
RSP: 0018:ffffc900007bbac8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88807949e800 RCX: 0000000000000998
RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88807c180140
RBP: ffff88807b50c000 R08: 000000000002d379 R09: ffffc900007bba00
R10: 0000000000000001 R11: 000000000002d358 R12: ffff888076f37000
R13: ffff88807949e9c8 R14: ffffc900007bbe08 R15: ffff888076f37000
FS: 00000000019bf940(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000074 CR3: 0000000076d68004 CR4: 0000000000360ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
mlx5_ib_create_qp+0xf36/0xf90 drivers/infiniband/hw/mlx5/qp.c:3014
_ib_create_qp drivers/infiniband/core/core_priv.h:333 [inline]
create_qp+0x57f/0xd20 drivers/infiniband/core/uverbs_cmd.c:1443
ib_uverbs_create_qp+0xcf/0x100 drivers/infiniband/core/uverbs_cmd.c:1564
ib_uverbs_write+0x5fa/0x780 drivers/infiniband/core/uverbs_main.c:664
__vfs_write+0x3f/0x90 fs/read_write.c:495
vfs_write+0xc7/0x1f0 fs/read_write.c:559
ksys_write+0x5e/0x110 fs/read_write.c:612
do_syscall_64+0x3e/0x70 arch/x86/entry/common.c:359
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x466479
Code: Bad RIP value.
RSP: 002b:00007ffd057b62b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000466479
RDX: 0000000000000070 RSI: 0000000020000240 RDI: 0000000000000003
RBP: 00000000019bf8fc R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 0000000000000bf6 R14: 00000000004cb859 R15: 00000000006fefc0
Fixes: 6c41965d647a ("RDMA/mlx5: Don't access ib_qp fields in internal destroy QP path")
Link: https://lore.kernel.org/r/20200707110612.882962-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Some released FW versions mistakenly don't set the capability that 50G per
lane link-modes are supported for VFs (ptys_extended_ethernet capability
bit).
Use PTYS.ext_eth_proto_capability instead, as this indication is always
accurate. If PTYS.ext_eth_proto_capability is valid
(has a non-zero value) conclude that the HCA supports 50G per lane.
Otherwise, conclude that the HCA doesn't support 50G per lane.
Fixes: 08e8676f1607 ("IB/mlx5: Add support for 50Gbps per lane link modes")
Link: https://lore.kernel.org/r/20200707110612.882962-3-leon@kernel.org
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Convert all-mask IP address to Big Endian, instead, for comparison.
Fixes: f286dd8eaad5 ("cxgb4: use correct type for all-mask IP address comparison")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When adding first socket to nbd, if nsock's allocation failed, the data
structure member "config->socks" was reallocated, but the data structure
member "config->num_connections" was not updated. A memory leak will occur
then because the function "nbd_config_put" will free "config->socks" only
when "config->num_connections" is not zero.
Fixes: 03bf73c315ed ("nbd: prevent memory leak")
Reported-by: syzbot+934037347002901b8d2a@syzkaller.appspotmail.com
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ARM64_WORKAROUND_1418040
ARM64_WORKAROUND_1418040 requires that AArch32 EL0 accesses to
the virtual counter register are trapped and emulated by the kernel.
This makes the vdso pretty pointless, and in some cases livelock
prone.
Provide a workaround entry that limits the vdso to 64bit tasks.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200706163802.1836732-4-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As we are about to disable the vdso for compat tasks in some circumstances,
let's allow a workaround descriptor to express exactly that.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200706163802.1836732-3-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The return value of down_and_up_cpus() can be assigned to @err directly.
With that, the useless assignment to @err with zero can be dropped.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200630075943.203954-1-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The CPU mask (@tmp) should be released on failing to allocate
@cpu_groups or any of its elements. Otherwise, it leads to memory
leakage because the CPU mask variable is dynamically allocated
when CONFIG_CPUMASK_OFFSTACK is enabled.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200630075227.199624-1-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This patch fixes ip dst and ipv6 address filters.
There were 2 mistakes in the code, which led to the issue:
* invalid register was used for ipv4 dst address;
* incorrect write order of dwords for ipv6 addresses.
Fixes: 23e7a718a49b ("net: aquantia: add rx-flow filter definitions")
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
kobject_uevent may allocate memory and it may be called while there are dm
devices suspended. The allocation may recurse into a suspended device,
causing a deadlock. We must set the noio flag when sending a uevent.
The observed deadlock was reported here:
https://www.redhat.com/archives/dm-devel/2020-March/msg00025.html
Reported-by: Khazhismel Kumykov <khazhy@google.com>
Reported-by: Tahsin Erdogan <tahsin@google.com>
Reported-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Only triggering reclaim based on the percentage of unmapped cache
zones can fail to detect cases where reclaim is needed, e.g. if the
target has only 2 or 3 cache zones and only one unmapped cache zone,
the percentage of free cache zones is higher than
DMZ_RECLAIM_LOW_UNMAP_ZONES (30%) and reclaim does not trigger.
This problem, combined with the fact that dmz_schedule_reclaim() is
called from dmz_handle_bio() without the map lock held, leads to a
race between zone allocation and dmz_should_reclaim() result.
Depending on the workload applied, this race can lead to the write
path waiting forever for a free zone without reclaim being triggered.
Fix this by moving dmz_schedule_reclaim() inside dmz_alloc_zone()
under the map lock. This results in checking the need for zone reclaim
whenever a new data or buffer zone needs to be allocated.
Also fix dmz_reclaim_percentage() to always return 0 if the number of
unmapped cache (or random) zones is less than or equal to 1.
Suggested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next
Vinod writes:
phy: fixes for 5.8
*) Fix for intel combo driver for warns or errors
*) Constify symbols for am654-serdes & j721e-wiz
*) Return value fix for rockchip driver
*) Null pointer dereference fix for sun4i-usb
* tag 'phy-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: sun4i-usb: fix dereference of pointer phy0 before it is null checked
phy: rockchip: Fix return value of inno_dsidphy_probe()
phy: ti: j721e-wiz: Constify structs
phy: ti: am654-serdes: Constify regmap_config
phy: intel: fix enum type mismatch warning
phy: intel: Fix compilation error on FIELD_PREP usage
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char--misc-linus
Vinod writes:
soundwire fixes for v5.8
- Intel driver memory leak fix
* tag 'soundwire-5.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel: fix memory leak with devm_kasprintf
|
|
Fix unused but set variable warnings:
drivers/md/dm-zoned-reclaim.c:504:42: warning:
variable nr_rnd set but not used [-Wunused-but-set-variable]
504 | unsigned int p_unmap, nr_unmap_rnd = 0, nr_rnd = 0;
| ^~~~~~
drivers/md/dm-zoned-reclaim.c:504:24: warning:
variable nr_unmap_rnd set but not used [-Wunused-but-set-variable]
504 | unsigned int p_unmap, nr_unmap_rnd = 0, nr_rnd = 0;
| ^~~~~~~~~~~~
Fixes: f97809aec589 ("dm zoned: per-device reclaim")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.8-rc5
Here are some new device ids for 5.8.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.8-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Quectel EG95 LTE modem
USB: serial: ch341: add new Product ID for CH340
USB: serial: option: add GosunCn GM500 series
USB: serial: cypress_m8: enable Simply Automated UPB PIM
|
|
DM writecache does not handle asynchronous pmem. Reject it when
supplied as cache.
Link: https://lore.kernel.org/linux-nvdimm/87lfk5hahc.fsf@linux.ibm.com/
Fixes: 6e84200c0a29 ("virtio-pmem: Add virtio pmem driver")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
bio_uninit is the proper API to clean up a BIO that has been allocated
on stack or inside a structure that doesn't come from the BIO allocator.
Switch dm to use that instead of bio_disassociate_blkg, which really is
an implementation detail. Note that the bio_uninit calls are also moved
to the two callers of __send_empty_flush, so that they better pair with
the bio_init calls used to initialize them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
CONFIG_REGMAP is not selected when no other serial bus is supported.
It's largely academic since CONFIG_I2C is usually selected e.g. by
DRM, but still this can break randconfig so let's be explicit.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200707202628.113142-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
During DLL initialization, the DLL_CONFIG register value would be
updated with the value supplied from the device-tree.
Override this register only if a valid value is supplied.
Fixes: 03591160ca19 ("mmc: sdhci-msm: Read and use DLL Config property from device tree file")
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Link: https://lore.kernel.org/r/1594213888-2780-1-git-send-email-vbadigan@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Move the initialization of the vendor_part_id to be before calling
ib_register_device(), this is needed because the query_device() callback
is called from the context of ib_register_device() before initializing the
vendor_part_id, so the reported value is wrong.
Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface")
Link: https://lore.kernel.org/r/20200707130931.444724-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The HiSilicon hibmc driver triggers a splat at boot time as below
[ 14.137806] ------------[ cut here ]------------
[ 14.142405] hibmc-drm 0000:0a:00.0: Device has not been registered.
[ 14.148661] WARNING: CPU: 0 PID: 496 at drivers/gpu/drm/drm_fb_helper.c:2233 drm_fbdev_generic_setup+0x15c/0x1b8
[ 14.158787] [...]
[ 14.278307] Call trace:
[ 14.280742] drm_fbdev_generic_setup+0x15c/0x1b8
[ 14.285337] hibmc_pci_probe+0x354/0x418
[ 14.289242] local_pci_probe+0x44/0x98
[ 14.292974] work_for_cpu_fn+0x20/0x30
[ 14.296708] process_one_work+0x1c4/0x4e0
[ 14.300698] worker_thread+0x2c8/0x528
[ 14.304431] kthread+0x138/0x140
[ 14.307646] ret_from_fork+0x10/0x18
[ 14.311205] ---[ end trace a2000ec2d838af4d ]---
This turned out to be due to the fbdev device hasn't been registered when
drm_fbdev_generic_setup() is invoked. Let's fix the splat by moving it down
after drm_dev_register() which will follow the "Display driver example"
documented by commit de99f0600a79 ("drm/drv: DOC: Add driver example
code").
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706144713.1123-1-yuzenghui@huawei.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First set of IIO and counter fixes in the 5.8 cycle.
The buffer alignment fixes continue to trickle through as we get
reviews in. The rest are the standard mixed bag of long term issues
just discovered an things we missed in this cycle.
IIO fixes
* core
- Add missing IIO_MOD_H2 and ETHANOL strings. Somehow got missed
when drivers were added using these in attribute names.
* afe4403, afe4404, ak8974, hdc100x, hts221, ms5611
- Fix a recently identified issue with alignment when using
iio_push_to_buffers_with_timestamp which assumes the timestamp
is 8 byte aligned.
* ad7780
- Fix a some premature / excess cleanup in an error path.
* adi-axi-adc
- Fix reference counting on the wrong object.
* ak8974
- Fix unbalance runtime pm.
* mma8452
- Fix missing iio_device_unregister in error path.
* zp2326
- Error handling for pm_runtime_get_sync failing.
counter fixes
* Add lock guards in 104-quad-8 to protect against races - done
in 2 patches to allow easy back porting.
* tag 'iio-fixes-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: adc: ad7780: Fix a resource handling path in 'ad7780_probe()'
iio:pressure:ms5611 Fix buffer element alignment
iio:humidity:hts221 Fix alignment and data leak issues
iio:humidity:hdc100x Fix alignment and data leak issues
iio:magnetometer:ak8974: Fix alignment and data leak issues
iio: adc: adi-axi-adc: Fix object reference counting
iio: pressure: zpa2326: handle pm_runtime_get_sync failure
counter: 104-quad-8: Add lock guards - filter clock prescaler
counter: 104-quad-8: Add lock guards - differential encoder
iio: core: add missing IIO_MOD_H2/ETHANOL string identifiers
iio: magnetometer: ak8974: Fix runtime PM imbalance on error
iio: mma8452: Add missed iio_device_unregister() call in mma8452_probe()
iio:health:afe4404 Fix timestamp alignment and prevent data leak.
iio:health:afe4403 Fix timestamp alignment and prevent data leak.
|
|
Add FUJITSU ETERNUS_AHB
Link: https://lore.kernel.org/r/DM6PR06MB5276CCA765336BD312C4282E8C660@DM6PR06MB5276.namprd06.prod.outlook.com
Signed-off-by: Steve Schremmer <steve.schremmer@netapp.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
BRM_status_show() has several error branches, but none of them record the
error in the error return.
Also while at it remove the manual mutex_unlock() of the pci_access_mutex
in case of an ongoing pci error recovery or host removal and jump to the
cleanup label instead.
Note: We can safely jump to out from here as io_unit_pg3 is initialized to
NULL and if it hasn't been allocated, kfree() skips the NULL pointer.
[mkp: compilation warning]
Link: https://lore.kernel.org/r/20200701131454.5255-1-johannes.thumshirn@wdc.com
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If system memory is migrated to device private memory and no GPU MMU
page table entry exists, the GPU will fault and call hmm_range_fault()
to get the PFN for the page. Since the .dev_private_owner pointer in
struct hmm_range is not set, hmm_range_fault returns an error which
results in the GPU program stopping with a fatal fault.
Fix this by setting .dev_private_owner appropriately.
Fixes: 08ddddda667b ("mm/hmm: check the device private page owner in hmm_range_fault()")
Cc: stable@vger.kernel.org
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
The patch to add zero page migration to GPU memory inadvertently included
part of a future change which broke normal page migration to GPU memory
by copying too much data and corrupting GPU memory.
Fix this by only copying one page instead of a byte count.
Fixes: 9d4296a7d4b3 ("drm/nouveau/nouveau/hmm: fix migrate zero page to GPU")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Tegra TRM says worst-case reply time is 1216us, and this should fix some
spurious timeouts that have been popping up.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Prevents "snd_hda_codec_hdmi hdaudioC1D0: HDMI: pin nid 5 not registered"
that occur on some configurations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
On eviction, we acquire the vm->mutex and then wait on the vma->active.
Therefore when binding and pinning the vma, we must follow the same
sequence, lock/pin the vma then mark it active. Otherwise, we mark the
vma as active, then wait for the vm->mutex, and meanwhile the evictor
holding the mutex waits upon us to complete our activity.
Fixes: 8ccfc20a7d56 ("drm/i915/gt: Mark ring->vma as active while pinned")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706170138.8993-1-chris@chris-wilson.co.uk
(cherry picked from commit 8567774e87e23a57155e5102f81208729b992ae6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The queue reset pattern is used in a couple different places,
only slightly different from each other, and could cause
issues if one gets changed and the other didn't. This puts
them together so that only one version is needed, yet each
can have slighty different effects by passing in a pointer
to a work function to do whatever configuration twiddling is
needed in the middle of the reset.
This specifically addresses issues seen where under loops
of changing ring size or queue count parameters we could
occasionally bump into the netdev watchdog.
v2: added more commit message commentary
Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When generating debug dump, driver firstly collects all data in binary
form, and then performs per-feature formatting to human-readable if it
is supported.
For ethtool -d, this is roughly incorrect for two reasons. First of all,
drivers should always provide only original raw dumps to Ethtool without
any changes.
The second, and more critical, is that Ethtool's output buffer size is
strictly determined by ethtool_ops::get_regs_len(), and all data *must*
fit in it. The current version of driver always returns the size of raw
data, but the size of the formatted buffer exceeds it in most cases.
This leads to out-of-bound writes and memory corruption.
Address both issues by adding an option to return original, non-formatted
debug data, and using it for Ethtool case.
v2:
- Expand commit message to make it more clear;
- No functional changes.
Fixes: c965db444629 ("qed: Add support for debug data collection")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rwlock.h should not be included directly. Instead linux/splinlock.h
should be included. Including it directly will break the RT build.
Fixes: 549c243e4e010 ("net/mlx5e: Extract neigh-specific code from en_rep.c to rep/neigh.c")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the ISR, we poll the event register for the queues in need of
service and then enter polled mode. After this point, the event
register will never be read again until we exit polled mode.
In a scenario where a UDP flow is routed back out through the same
interface, i.e. "router-on-a-stick" we'll typically only see an rx
queue event initially. Once we start to process the incoming flow
we'll be locked polled mode, but we'll never clean the tx rings since
that event is never caught.
Eventually the netdev watchdog will trip, causing all buffers to be
dropped and then the process starts over again.
Rework the NAPI poll to keep trying to consome the entire budget as
long as new events are coming in, making sure to service all rx/tx
queues, in priority order, on each pass.
Fixes: 4d494cdc92b3 ("net: fec: change data structure to support multiqueue")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Tested-by: Fugang Duan <fugang.duan@nxp.com>
Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
