summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-04-25drm/mediatek: Use ERR_CAST instead of ERR_PTR(PTR_ERR())Gomonovych, Vasyl
Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)). drivers/gpu/drm/mediatek/mtk_drm_gem.c:223:9-16: WARNING: ERR_CAST can be used with mtk_gem Generated by: scripts/coccinelle/api/err_cast.cocci Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-04-25drm: adv7511: Add support for i2c_new_secondary_deviceKieran Bingham
The ADV7511 has four 256-byte maps that can be accessed via the main I2C ports. Each map has it own I2C address and acts as a standard slave device on the I2C bus. Allow a device tree node to override the default addresses so that address conflicts with other devices on the same bus may be resolved at the board description level. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/1518544137-2742-6-git-send-email-kbingham@kernel.org
2018-04-25rtc: opal: Fix OPAL RTC driver OPAL_BUSY loopsNicholas Piggin
The OPAL RTC driver does not sleep in case it gets OPAL_BUSY or OPAL_BUSY_EVENT from firmware, which causes large scheduling latencies, up to 50 seconds have been observed here when RTC stops responding (BMC reboot can do it). Fix this by converting it to the standard form OPAL_BUSY loop that sleeps. Fixes: 628daa8d5abf ("powerpc/powernv: Add RTC and NVRAM support plus RTAS fallbacks") Cc: stable@vger.kernel.org # v3.2+ Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-24drm/amdgpu: set COMPUTE_PGM_RSRC1 for SGPR/VGPR clearing shadersNicolai Hähnle
Otherwise, the SQ may skip some of the register writes, or shader waves may be allocated where we don't expect them, so that as a result we don't actually reset all of the register SRAMs. This can lead to spurious ECC errors later on if a shader uses an uninitialized register. Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-04-24drm/atomic: Print debug message on atomic check failureLyude Paul
Does what it says on the label, it's a little confusing debugging atomic check failures otherwise. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180411234302.2896-2-lyude@redhat.com
2018-04-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix rtnl deadlock in ipvs, from Julian Anastasov. 2) s390 qeth fixes from Julian Wiedmann (control IO completion stalls, bad MAC address update sequence, request side races on command IO timeouts). 3) Handle seq_file overflow properly in l2tp, from Guillaume Nault. 4) Fix VLAN priority mappings in cpsw driver, from Ivan Khoronzhuk. 5) Packet scheduler ife action fixes (malformed TLV lengths, etc.) from Alexander Aring. 6) Fix out of bounds access in tcp md5 option parser, from Jann Horn. 7) Missing netlink attribute policies in rtm_ipv6_policy table, from Eric Dumazet. 8) Missing socket address length checks in l2tp and pppoe connect, from Guillaume Nault. 9) Fix netconsole over team and bonding, from Xin Long. 10) Fix race with AF_PACKET socket state bitfields, from Willem de Bruijn. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (51 commits) ice: Fix insufficient memory issue in ice_aq_manage_mac_read sfc: ARFS filter IDs net: ethtool: Add missing kernel doc for FEC parameters packet: fix bitfield update race ice: Do not check INTEVENT bit for OICR interrupts ice: Fix incorrect comment for action type ice: Fix initialization for num_nodes_added igb: Fix the transmission mode of queue 0 for Qav mode ixgbevf: ensure xdp_ring resources are free'd on error exit team: fix netconsole setup over team amd-xgbe: Only use the SFP supported transceiver signals amd-xgbe: Improve KR auto-negotiation and training amd-xgbe: Add pre/post auto-negotiation phy hooks pppoe: check sockaddr length in pppoe_connect() l2tp: check sockaddr length in pppol2tp_connect() net: phy: marvell: clear wol event before setting it ipv6: add RTA_TABLE and RTA_PREFSRC to rtm_ipv6_policy bonding: do not set slave_dev npinfo before slave_enable_netpoll in bond_enslave tcp: don't read out-of-bounds opsize ibmvnic: Clean actual number of RX or TX pools ...
2018-04-24ACPI / video: Only default only_lcd to true on Win8-ready _desktops_Hans de Goede
Commit 5928c281524f (ACPI / video: Default lcd_only to true on Win8-ready and newer machines) made only_lcd default to true on all machines where acpi_osi_is_win8() returns true, including laptops. The purpose of this is to avoid the bogus / non-working acpi backlight interface which many newer BIOS-es define on desktop machines. But this is causing a regression on some laptops, specifically on the Dell XPS 13 2013 model, which does not have the LCD flag set for its fully functional ACPI backlight interface. Rather then DMI quirking our way out of this, this commits changes the logic for setting only_lcd to true, to only do this on machines with a desktop (or server) dmi chassis-type. Note that we cannot simply only check the chassis-type and not register the backlight interface based on that as there are some laptops and tablets which have their chassis-type set to "3" aka desktop. Hopefully the combination of checking the LCD flag, but only on devices with a desktop(ish) chassis-type will avoid the needs for DMI quirks for this, or at least limit the amount of DMI quirks which we need to a minimum. Fixes: 5928c281524f (ACPI / video: Default lcd_only to true on Win8-ready and newer machines) Reported-and-tested-by: James Hogan <jhogan@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: 4.15+ <stable@vger.kernel.org> # 4.15+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-24Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-04-24 This series contains fixes to ixgbevf, igb and ice drivers. Colin Ian King fixes the return value on error for the new XDP support that went into ixgbevf for 4.17. Vinicius provides a fix for queue 0 for igb, which was not receiving all the credits it needed when QAV mode was enabled. Anirudh provides several fixes for the new ice driver, starting with properly initializing num_nodes_added to zero. Fixed up a code comment to better reflect what is really going on in the code. Fixed how to detect if an OICR interrupt has occurred to a more reliable method. Md Fahad fixes the ice driver to allocate the right amount of memory when reading and storing the devices MAC addresses. The device can have up to 2 MAC addresses (LAN and WoL), while WoL is currently not supported, we need to ensure it can be properly handled when support is added. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24drm: Don't EXPORT drm_add/reset_display_infoDaniel Vetter
Only used within drm.ko, no need to tempt drivers. Cc: Keith Packard <keithp@keithp.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180424142242.12093-1-daniel.vetter@ffwll.ch
2018-04-24ice: Fix insufficient memory issue in ice_aq_manage_mac_readMd Fahad Iqbal Polash
For the MAC read operation, the device can return up to two (LAN and WoL) MAC addresses. Without access to adequate memory, the device will return an error. Fixed this by allocating the right amount of memory. Also, logic to detect and copy the LAN MAC address into the port_info structure has been added. Note that the WoL MAC address is ignored currently as the WoL feature isn't supported yet. Fixes: dc49c7723676 ("ice: Get MAC/PHY/link info and scheduler topology") Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-24sfc: ARFS filter IDsEdward Cree
Associate an arbitrary ID with each ARFS filter, allowing to properly query for expiry. The association is maintained in a hash table, which is protected by a spinlock. v3: fix build warnings when CONFIG_RFS_ACCEL is disabled (thanks lkp-robot). v2: fixed uninitialised variable (thanks davem and lkp-robot). Fixes: 3af0f34290f6 ("sfc: replace asynchronous filter operations") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24drm/i915/breadcrumbs: Keep the fake irq armed across resetChris Wilson
Instead of synchronously cancelling the timer and re-enabling it inside the reset callbacks, keep the timer enabled and let it die on its next wakeup if no longer required. This allows intel_engine_reset_breadcrumbs() to be used from an atomic (timer/softirq) context such as required for resetting an engine. It also allows us to react better to the user poking around debugfs for testing missed irqs. v2: Tighten the order of del_timer_sync as the fake_irq timer may trigger the hangcheck timer, and so we should cancel it first and then cancel the hangcheck (Mika) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180424142945.6787-1-chris@chris-wilson.co.uk
2018-04-24ice: Do not check INTEVENT bit for OICR interruptsBen Shelton
According to the hardware spec, checking the INTEVENT bit isn't a reliable way to detect if an OICR interrupt has occurred. This is because this bit can be cleared by the hardware/firmware before the interrupt service routine has run. So instead, just check for OICR events every time. Fixes: 940b61af02f4 ("ice: Initialize PF and setup miscellaneous interrupt") Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-24random: fix possible sleeping allocation from irq contextTheodore Ts'o
We can do a sleeping allocation from an irq context when CONFIG_NUMA is enabled. Fix this by initializing the NUMA crng instances in a workqueue. Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot+9de458f6a5e713ee8c1a@syzkaller.appspotmail.com Fixes: 8ef35c866f8862df ("random: set up the NUMA crng instances...") Cc: stable@vger.kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-04-24ice: Fix incorrect comment for action typeAnirudh Venkataramanan
Action type 5 defines large action generic values. Fix comment to reflect that better. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-24ice: Fix initialization for num_nodes_addedAnirudh Venkataramanan
ice_sched_add_nodes_to_layer is used recursively, and so we start with num_nodes_added being 0. This way, in case of an error or if num_nodes is NULL, the function just returns 0 to indicate that no nodes were added. Fixes: 5513b920a4f7 ("ice: Update Tx scheduler tree for VSI multi-Tx queue support") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-24igb: Fix the transmission mode of queue 0 for Qav modeVinicius Costa Gomes
When Qav mode is enabled, queue 0 should be kept on Stream Reservation mode. From the i210 datasheet, section 8.12.19: "Note: Queue0 QueueMode must be set to 1b when TransmitMode is set to Qav." ("QueueMode 1b" represents the Stream Reservation mode) The solution is to give queue 0 the all the credits it might need, so it has priority over queue 1. A situation where this can happen is when cbs is "installed" only on queue 1, leaving queue 0 alone. For example: $ tc qdisc replace dev enp2s0 handle 100: parent root mqprio num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@2 hw 0 $ tc qdisc replace dev enp2s0 parent 100:2 cbs locredit -1470 \ hicredit 30 sendslope -980000 idleslope 20000 offload 1 Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-24drm/i915/selftests: Fix uninitialized variableGustavo A. R. Silva
There is a potential execution path in which variable err is returned without being properly initialized previously. Fix this by initializing variable err to 0. Addresses-Coverity-ID: 1468362 ("Uninitialized scalar variable") Fixes: f4ecfbfc32ed ("drm/i915: Check whitelist registers across resets") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180424131545.GA4053@embeddedor.com
2018-04-24mtd: cfi: cmdset_0002: Do not allow read/write to suspend erase block.Joakim Tjernlund
Currently it is possible to read and/or write to suspend EB's. Writing /dev/mtdX or /dev/mtdblockX from several processes may break the flash state machine. Taken from cfi_cmdset_0001 driver. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Cc: <stable@vger.kernel.org> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-04-24mtd: cfi: cmdset_0001: Workaround Micron Erase suspend bug.Joakim Tjernlund
Some Micron chips does not work well wrt Erase suspend for boot blocks. This avoids the issue by not allowing Erase suspend for the boot blocks for the 28F00AP30(1GBit) chip. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Cc: <stable@vger.kernel.org> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-04-24mtd: cfi: cmdset_0001: Do not allow read/write to suspend erase block.Joakim Tjernlund
Currently it is possible to read and/or write to suspend EB's. Writing /dev/mtdX or /dev/mtdblockX from several processes may break the flash state machine. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Cc: <stable@vger.kernel.org> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-04-24ixgbevf: ensure xdp_ring resources are free'd on error exitColin Ian King
The current error handling for failed resource setup for xdp_ring data is a break out of the loop and returning 0 indicated everything was OK, when in fact it is not. Fix this by exiting via the error exit label err_setup_tx that will clean up the resources correctly and return and error status. Detected by CoverityScan, CID#1466879 ("Logically dead code") Fixes: 21092e9ce8b1 ("ixgbevf: Add support for XDP_TX action") Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-24drm/i915/fbdev: Enable late fbdev initial configurationJosé Roberto de Souza
If the initial fbdev configuration (intel_fbdev_initial_config()) runs and there still no sink connected it will cause drm_fb_helper_initial_config() to return 0 as no error happened (but internally the return is -EAGAIN). Because no framebuffer was allocated, when a sink is connected intel_fbdev_output_poll_changed() will not execute drm_fb_helper_hotplug_event() that would trigger another try to do the initial fbdev configuration. So here allowing drm_fb_helper_hotplug_event() to be executed when there is no framebuffer allocated and fbdev was not set up yet. This issue also happens when a MST DP sink is connected since boot, as the MST topology is discovered in parallel if intel_fbdev_initial_config() is executed before the first sink MST is discovered it will cause this same issue. This is a follow-up patch of https://patchwork.freedesktop.org/patch/196089/ Changes from v1: - not creating a dump framebuffer anymore, instead just allowing drm_fb_helper_hotplug_event() to execute when fbdev is not setup yet. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104158 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104425 Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: frederik <frederik.schwan@linux.com> # 4.15.17 Tested-by: Ian Pilcher <arequipeno@gmail.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180418234158.9388-1-jose.souza@intel.com
2018-04-24team: fix netconsole setup over teamXin Long
The same fix in Commit dbe173079ab5 ("bridge: fix netconsole setup over bridge") is also needed for team driver. While at it, remove the unnecessary parameter *team from team_port_enable_netpoll(). v1->v2: - fix it in a better way, as does bridge. Fixes: 0fb52a27a04a ("team: cleanup netpoll clode") Reported-by: João Avelino Bellomo Filho <jbellomo@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24drm/i915: Skip printing global offsets for per-engine scratch pagesChris Wilson
Knowing the offset of the per-engine scratch/HWS page during boot is not very informative, so remove the DRM_DEBUG. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180424115236.2022-1-chris@chris-wilson.co.uk
2018-04-24drm/i915: Don't dump umpteen thousand requestsChris Wilson
If we have more than a few, possibly several thousand request in the queue, don't show the central portion, just the first few and the last being executed and/or queued. The first few should be enough to help identify a problem in execution, and most often comparing the first/last in the queue is enough to identify problems in the scheduling. We may need some fine tuning to set MAX_REQUESTS_TO_SHOW for common debug scenarios, but for the moment if we can avoiding spending more than a few seconds dumping the GPU state that will avoid a nasty livelock (where hangcheck spends so long dumping the state, it fires again and starts to dump the state again in parallel, ad infinitum). v2: Remember to print last not the stale rq iter after the loop. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180424081600.27544-1-chris@chris-wilson.co.uk
2018-04-24drm/i915: Build request info on stack before printkChris Wilson
printk unhelpfully inserts a '\n' between consecutive calls, and since our drm_printf wrapper may be emitting info a seq_file instead, KERN_CONT is not an option. To work with any drm_printf destination, we need to build up the output into a temporary buf on the stack and then feed the complete line in a single call to printk. Fixes: b7268c5eed0a ("drm/i915: Pack params to engine->schedule() into a struct") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180424010839.22860-1-chris@chris-wilson.co.uk
2018-04-24drm/i915: Add compiler barrier to wait_forMika Kuoppala
We need to be careful to not let compiler evaluate the expiration and the operation on it's terms. Document and enforce that COND will be evaluated before checking timeout expiration. Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180423113754.28424-2-mika.kuoppala@linux.intel.com
2018-04-24drm/i915: Use ktime on wait_forMika Kuoppala
We use jiffies to determine when wait expires. However Imre did find out that jiffies can and will do a >1 increments on certain situations [1]. When this happens in a wait_for loop, we return timeout errorneously much earlier than what the real wallclock would say. We can't afford our waits to timeout prematurely. Discard jiffies and change to ktime to detect timeouts. v2: added bugzilla entry (Imre), added stable (Chris) Reported-by: Imre Deak <imre.deak@intel.com> References: https://lkml.org/lkml/2018/4/18/798 [1] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105771 Cc: Imre Deak <imre.deak@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180423113754.28424-1-mika.kuoppala@linux.intel.com
2018-04-24drm/xen-front: use simple display pipe prepare_fb helperDaniel Vetter
I missed this one because on an older tree. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: xen-devel@lists.xen.org Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180409085134.27321-1-daniel.vetter@ffwll.ch
2018-04-24drm/atomic: better doc for implicit vs explicit fencingDaniel Vetter
Note that a pile of drivers don't seem to take implicit fencing into account, or at least don't call drm_atoimc_set_fence_for_plane(). Cc'ing relevant people, or at least some. Some drivers also look like they don't disable implicit fencing (e.g. amdgpu) because the explicit fences and implicit fences are handled by entirely independent code paths. I also wonder whether we shouldn't just make the recommended helpers the default ones, since a lot of drivers don't bother to handle the implicit fences at all it seems. The helpers won't blow up even for non-GEM drivers or GEM drivers which don't fill out the gem bo pointers in struct drm_framebuffer. v2: Comments from Eric. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-7-daniel.vetter@ffwll.ch
2018-04-24drm/mxsfb: Use simple_display_pipe prepare_fb helperDaniel Vetter
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-6-daniel.vetter@ffwll.ch
2018-04-24drm/pl111: Use simple_display_pipe prepare_fb helperDaniel Vetter
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-5-daniel.vetter@ffwll.ch
2018-04-24drm/tve200: Use simple_display_pipe prepare_fb helperDaniel Vetter
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-4-daniel.vetter@ffwll.ch
2018-04-24drm: Move simple_display_pipe prepare_fb helper into gem fb helpersDaniel Vetter
There's nothing tinydrm specific to this, and there's a few more copies of the same in various other drivers. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: David Lechner <david@lechnology.com> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Daniel Stone <daniels@collabora.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: David Lechner <david@lechnology.com> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-3-daniel.vetter@ffwll.ch
2018-04-24drm/vmwgfx: Remove no-op prepare/cleanup_fb callbacksDaniel Vetter
Less hits to go through when I git grep over all drivers. These callbacks are optional. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-2-daniel.vetter@ffwll.ch
2018-04-24drm: panel-orientation-quirks: Add quirk for Lenovo Ideapad Mixx 320Hans de Goede
The Lenovo Ideapad Mixx 320 laptop uses a portrait LCD panel, add a quirk for this. While at it instead of duplicating the same drm_dmi_panel_orientation_data for 3 laptops add a generic lcd800x1280_rightside_up orientation_data and use that for all 3 (including the new Mixx 320 entry). Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180418123642.11088-2-hdegoede@redhat.com
2018-04-24drm: panel-orientation-quirks: Add quirk for Lenovo Ideapad Mixx 310Hans de Goede
Some production batches of the Lenovo Ideapad Mixx 310 laptop use a portrait LCD panel, add a quirk for this. Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180418123642.11088-1-hdegoede@redhat.com
2018-04-24ACPI / button: make module loadable when booted in non-ACPI modeArd Biesheuvel
Modules such as nouveau.ko and i915.ko have a link time dependency on acpi_lid_open(), and due to its use of acpi_bus_register_driver(), the button.ko module that provides it is only loadable when booted in ACPI mode. However, the ACPI button driver can be built into the core kernel as well, in which case the dependency can always be satisfied, and the dependent modules can be loaded regardless of whether the system was booted in ACPI mode or not. So let's fix this asymmetry by making the ACPI button driver loadable as a module even if not booted in ACPI mode, so it can provide the acpi_lid_open() symbol in the same way as when built into the kernel. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [ rjw: Minor adjustments of comments, whitespace and names. ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-24drm/amdkfd: fix build, select MMU_NOTIFIERRandy Dunlap
When CONFIG_MMU_NOTIFIER is not enabled, struct mmu_notifier has an incomplete type definition, which causes build errors. ../drivers/gpu/drm/amd/amdkfd/kfd_priv.h:607:22: error: field 'mmu_notifier' has incomplete type ../include/linux/kernel.h:979:32: error: dereferencing pointer to incomplete type ../include/linux/kernel.h:980:18: error: dereferencing pointer to incomplete type ../drivers/gpu/drm/amd/amdkfd/kfd_process.c:434:2: error: implicit declaration of function 'mmu_notifier_unregister_no_release' [-Werror=implicit-function-declaration] ../drivers/gpu/drm/amd/amdkfd/kfd_process.c:435:2: error: implicit declaration of function 'mmu_notifier_call_srcu' [-Werror=implicit-function-declaration] ../drivers/gpu/drm/amd/amdkfd/kfd_process.c:438:21: error: variable 'kfd_process_mmu_notifier_ops' has initializer but incomplete type ../drivers/gpu/drm/amd/amdkfd/kfd_process.c:439:2: error: unknown field 'release' specified in initializer ../drivers/gpu/drm/amd/amdkfd/kfd_process.c:439:2: warning: excess elements in struct initializer [enabled by default] ../drivers/gpu/drm/amd/amdkfd/kfd_process.c:439:2: warning: (near initialization for 'kfd_process_mmu_notifier_ops') [enabled by default] ../drivers/gpu/drm/amd/amdkfd/kfd_process.c:534:2: error: implicit declaration of function 'mmu_notifier_register' [-Werror=implicit-function-declaration] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-04-24cpufreq: brcmstb-avs-cpufreq: remove development debug supportMarkus Mayer
This debug code was helpful while developing the driver, but it isn't being used for anything anymore. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-24drm/amdkfd: fix clock counter retrieval for node without GPUAndres Rodriguez
Currently if a user requests clock counters for a node without a GPU resource we will always return EINVAL. Instead if no GPU resource is attached, fill the gpu_clock_counter argument with zeroes so that we may proceed and return valid CPU counters. Signed-off-by: Andres Rodriguez <andres.rodriguez@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-04-24drm/amdkfd: Fix the error return code in kfd_ioctl_unmap_memory_from_gpu()Wei Yongjun
Passing NULL pointer to PTR_ERR will result in return value of 0 indicating success which is clearly not what it is intended here. This patch returns -EINVAL instead. v2: change ret code to -ENODEV Fixes: 5ec7e02854b3 ("drm/amdkfd: Add ioctls for GPUVM memory management") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-04-24ACPI / watchdog: Prefer iTCO_wdt on Lenovo Z50-70Mika Westerberg
WDAT table on Lenovo Z50-70 is using RTC SRAM (ports 0x70 and 0x71) to store state of the timer. This conflicts with Linux RTC driver (rtc-cmos.c) who fails to reserve those ports for itself preventing RTC from functioning. In addition the WDAT table seems not to be fully functional because it does not reset the system when the watchdog times out. On this system iTCO_wdt works just fine so we simply prefer to use it instead of WDAT. This makes RTC working again and also results working watchdog via iTCO_wdt. Reported-by: Peter Milley <pbmilley@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=199033 Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-24drm/amdkfd: kfd_dev_is_large_bar() can be statickbuild test robot
Fixes: 5ec7e02854b3 ("drm/amdkfd: Add ioctls for GPUVM memory management") Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-04-24drm/rockchip: psr: Remove flush by CRTCTomasz Figa
It is not used anymore after last changes and it was not even correct to begin with as it assumed a 1:1 relation between a CRTC and encoder, while in fact a CRTC can be attached to multiple encoders. Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-28-enric.balletbo@collabora.com
2018-04-24drm/rockchip: Disallow PSR for the whole atomic commitTomasz Figa
Currently PSR flush is triggered from CRTC's .atomic_begin() callback, which is executed after modeset disables and enables and before plane updates are committed. Since PSR flush and re-enable can be triggered asynchronously by external sources (input event, delayed work), it can race with hardware programming done in the aforementioned stages. This patch blocks the PSR completely before hardware programming part begins and unblock after it ends. This relies on reference counted PSR disable introduced with previous patch. Cc: Kristian H. Kristensen <hoegsberg@chromium.org> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-27-enric.balletbo@collabora.com
2018-04-24drm/rockchip: psr: Sanitize semantics of allow/inhibit APITomasz Figa
Currently both rockchip_drm_psr_activate() and _deactivate() only set the boolean "active" flag without actually making sure that hardware state complies with it. Since we are going to extend the usage of this API to properly lock PSR for the duration of atomic commits, we change the semantics in following way: - a counter is used to track the number of inhibit requests, - PSR is actually disabled in hardware on first inhibit request, - PSR enable work is scheduled on last allow request. The above allows using the API as a way to deterministically synchronize PSR state changes with other DRM events, i.e. atomic commits and cursor updates. As a nice side effect, the naming is sorted out and we have "inhibit" for stopping the software logic and "enable" for hardware state. Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-26-enric.balletbo@collabora.com
2018-04-24drm/rockchip: psr: Avoid redundant calls to .set() callbackTomasz Figa
The first time after we call rockchip_drm_do_flush() after rockchip_drm_psr_register(), we go from PSR_DISABLE to PSR_FLUSH. The difference between PSR_DISABLE and PSR_FLUSH is whether or not we have a delayed work pending - PSR is off in either state. However psr_set_state() only catches the transition from PSR_FLUSH to PSR_DISABLE (which never happens), while going from PSR_DISABLE to PSR_FLUSH triggers a call to psr->set() to disable PSR while it's already disabled. This triggers the eDP PHY power-on sequence without being shut down first and this seems to occasionally leave the encoder unable to later enable PSR. Let's just simplify the state machine and simply consider PSR_DISABLE and PSR_FLUSH the same state. Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-25-enric.balletbo@collabora.com
2018-04-24drm/rockchip: analogix_dp: Do not call Analogix code before bindTomasz Figa
Driver callbacks, such as system suspend or resume can be called any time, specifically they can be called before the component bind callback. Let's use dp->adp pointer as a safeguard and skip calling Analogix entry points if it is an ERR_PTR(). Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-24-enric.balletbo@collabora.com
generated by cgit (git 2.34.1) at 2025-09-23 14:26:01 +0000