summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-05-30ath11k: clear DCM max constellation tx valueMuna Sinada
According to 11ax spec. draft 4.0. DCM Max Constellation Tx data field should be set to "Reserved" for an AP, therefore bit is cleared. Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1590707417-29672-1-git-send-email-msinada@codeaurora.org
2020-05-30ath11k: reset trigger frame MAC padding durationMuna Sinada
The value was 3 and it's reserved value. Corrected to maintain fw defaults. Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1590706483-27609-1-git-send-email-msinada@codeaurora.org
2020-05-30ath10k: Remove ath10k_qmi_register_service_notifier() declarationDouglas Anderson
The ath10k/qmi.h header file contains a declaration for the function ath10k_qmi_register_service_notifier(). This function doesn't exist. Remove the declaration. This patch is a no-op and was just found by code inspection. Fixes: ba94c753ccb4 ("ath10k: add QMI message handshake for wcn3990 client") Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200528122105.1.I31937dce728b441fd72cbe23447bc4710fd56ddb@changeid
2020-05-30ath9k_htc: Set RX filter based to allow broadcast Action frame RXJouni Malinen
Advertise support for multicast frame registration and update the RX filter based on the recently added FIF_MCAST_ACTION to allow broadcast Action frames to be received. This is needed for Device Provisioning Protocol (DPP) use cases that use broadcast Public Action frames. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200426084733.7889-2-jouni@codeaurora.org
2020-05-30ath9k: Set RX filter based to allow broadcast Action frame RXJouni Malinen
Advertise support for multicast frame registration and update the RX filter based on the recently added FIF_MCAST_ACTION to allow broadcast Action frames to be received. This is needed for Device Provisioning Protocol (DPP) use cases that use broadcast Public Action frames. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200426084733.7889-1-jouni@codeaurora.org
2020-05-30i2c: designware: Discard Cherry Trail model flagSerge Semin
A PM workaround activated by the flag MODEL_CHERRYTRAIL has been removed since commit 9cbeeca05049 ("i2c: designware: Remove Cherry Trail PMIC I2C bus pm_disabled workaround"), but the flag most likely by mistake has been left in the Dw I2C drivers. Let's remove it. Since MODEL_MSCC_OCELOT is the only model-flag left, redefine it to be 0x100 so setting a very first bit in the MODEL_MASK bits range. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-30i2c: designware: Add Baytrail sem config DW I2C platform dependencySerge Semin
Currently Intel Baytrail I2C semaphore is a feature of the DW APB I2C platform driver. It's a bit confusing to see it's config in the menu at some separated place with no reference to the platform code. Let's move the config definition to be below the I2C_DESIGNWARE_PLATFORM config and mark it with "depends on I2C_DESIGNWARE_PLATFORM" statement. By doing so the config menu will display the feature right below the DW I2C platform driver item and will indent it to the right so signifying its belonging. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-30i2c: designware: slave: Set DW I2C core module dependencySerge Semin
DW APB I2C slave code in fact depends on the DW I2C driver core, but not on the platform code as it used to be before commit 90bc1ee6de9f ("i2c: designware: Allow slave mode for PCI enumerated devices"). Yes, the I2C slave interface is currently supported by both the platform and PCI versions of the IP core, but it still depends on the DW I2C core functionality and must be available only if the last one is enabled. So make sure the DW APB I2C slave config is only available if the I2C_DESIGNWARE_CORE config is enabled. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-30i2c: designware: Use `-y` to build multi-object modulesSerge Semin
Since commit 4f8272802739 ("Documentation: update kbuild loadable modules goals & examples") `-objs` is fitted for building host programs, lets change DW I2C core, platform and PCI driver kbuild directives to using `-y`, which more straightforward for device drivers. By doing so we can discard the ifeq construction in favor to the more natural and less bulky `<module>-$(CONFIG_X) += x.o` Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-30Merge tag 'irqchip-5.8' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier: - A few new drivers for the Loongson MIPS platform (HTVEC, PIC, MSI) - A cleanup of the __irq_domain_add() API - A cleanup of the IRQ simulator to actually use some of the irq infrastructure - Some fixes for the Sifive PLIC when used in a multi-controller context - Fixes for the GICv3 ITS to spread interrupts according to the load of each CPU, and to honor managed interrupts - Numerous cleanups and documentation fixes
2020-05-29net/mlx5e: Make mlx5e_dcbnl_ops staticSaeed Mahameed
Fix sparse warning: drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c:988:29: error: symbol 'mlx5e_dcbnl_ops' was not declared. Should it be static? Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29net/mlx5e: en_tc: Fix cast to restricted __be32 warningSaeed Mahameed
Fixes sparse warnings: warning: cast to restricted __be32 warning: restricted __be32 degrades to integer Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com>
2020-05-29net/mlx5e: en_tc: Fix incorrect type in initializer warningsSaeed Mahameed
Fix some trivial warnings of the type: warning: incorrect type in initializer (different base types) Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com>
2020-05-29net/mlx5: Accel: fpga tls fix cast to __be64 and incorrect argument typesSaeed Mahameed
tls handle and rcd_sn are actually big endian and not in host format. Fix that. Fix the following sparse warnings: drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls.c:177:21: warning: cast to restricted __be64 drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls.c:178:52: warning: incorrect type in argument 2 (different base types) expected unsigned int [usertype] handle got restricted __be32 [usertype] handle Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29net/mlx5: cmd: Fix memset with byte count warningSaeed Mahameed
Fix sparse warning: drivers/net/ethernet/mellanox/mlx5/core/cmd.c:1949:15: warning: memset with byte count of 271720 mlx5_cmd_stats array is too big to be held inline in mlx5_cmd. Allocate it separately. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29net/mlx5: DR: Fix incorrect type in return expressionSaeed Mahameed
dr_ste_crc32_calc() calculates crc32 and should return it in HW format. It is being used to calculate a u32 index, hence we force the return value of u32 to avoid the sparse warning: drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c:115:16: warning: incorrect type in return expression (different base types) expected unsigned int got restricted __be32 [usertype] Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com>
2020-05-29net/mlx5: DR: Fix cast to restricted __be32Saeed Mahameed
raw_ip actual type is __be32 and not u32. Fix that and get rid of the warning. drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c:906:31: warning: cast to restricted __be32 Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com>
2020-05-29net/mlx5: DR: Fix incorrect type in argumentSaeed Mahameed
HW spec objects should receive a void ptr to work on, the MLX5_SET/GET macro will know how to handle it. No need to provide explicit or wrong pointer type in this case. warning: incorrect type in argument 1 (different base types) expected unsigned long long const [usertype] *sw_action got restricted __be64 [usertype] *[assigned] sw_action Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com>
2020-05-29net/mlx5e: Use generic API to build MPLS labelEli Cohen
Make use of generic API mpls_entry_encode() to build mpls label and get rid of local function. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29net/mlx5: reduce stack usage in qp_read_fieldArnd Bergmann
Moving the mlx5_ifc_query_qp_out_bits structure on the stack was a bit excessive and now causes the compiler to complain on 32-bit architectures: drivers/net/ethernet/mellanox/mlx5/core/debugfs.c: In function 'qp_read_field': drivers/net/ethernet/mellanox/mlx5/core/debugfs.c:274:1: error: the frame size of 1104 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Revert the previous patch partially to use dynamically allocation as the code did before. Unfortunately there is no good error handling in case the allocation fails. Fixes: 57a6c5e992f5 ("net/mlx5: Replace hand written QP context struct with automatic getters") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29net/mlx5e: Don't use err uninitialized in mlx5e_attach_decapNathan Chancellor
Clang warns: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:3712:6: warning: variable 'err' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] if (IS_ERR(d->pkt_reformat)) { ^~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:3718:6: note: uninitialized use occurs here if (err) ^~~ drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:3712:2: note: remove the 'if' if its condition is always true if (IS_ERR(d->pkt_reformat)) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:3670:9: note: initialize the variable 'err' to silence this warning int err; ^ = 0 1 warning generated. It is not wrong, err is only ever initialized in if statements but this one is not in one. Initialize err to 0 to fix this. Fixes: 14e6b038afa0 ("net/mlx5e: Add support for hw decapsulation of MPLS over UDP") Link: https://github.com/ClangBuiltLinux/linux/issues/1037 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29net/mlx5: Kconfig: Fix spelling typoSaeed Mahameed
"mdoe"->"mode" Fixes: d956873f908c ("net/mlx5e: Introduce kconfig var for TC support") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
2020-05-29mlx5: fix xdp data_meta setup in mlx5e_fill_xdp_buffJesper Dangaard Brouer
The helper function xdp_set_data_meta_invalid() must be called after setting xdp->data as it depends on it. The bug was introduced in the cited patch below, and cause the kernel to crash when using BPF helper bpf_xdp_adjust_head() on mlx5 driver. Fixes: 39d6443c8daf ("mlx5, xsk: Migrate to new MEM_TYPE_XSK_BUFF_POOL") Reported-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-30rtc: abx80x: Add Device Tree matching tableKevin P. Fleming
Enable automatic loading of the module when a Device Tree overlay specifies a device supported by this driver. Signed-off-by: Kevin P. Fleming <kevin+linux@km6g.us> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200528114617.166587-1-kevin+linux@km6g.us
2020-05-30rtc: rv3028: Add missed check for devm_regmap_init_i2c()Chuhong Yuan
rv3028_probe() misses a check for devm_regmap_init_i2c(). Add the missed check to fix it. Fixes: e6e7376cfd7b ("rtc: rv3028: add new driver") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200528103950.912353-1-hslester96@gmail.com
2020-05-30rtc: mpc5121: Use correct return value for mpc5121_rtc_probe()Tiezhu Yang
When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1590370788-15136-2-git-send-email-yangtiezhu@loongson.cn
2020-05-30rtc: goldfish: Use correct return value for goldfish_rtc_probe()Tiezhu Yang
When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1590370788-15136-1-git-send-email-yangtiezhu@loongson.cn
2020-05-30rtc: snvs: Add necessary clock operations for RTC APIsAnson Huang
There could be still RTC registers access after RTC suspend with clock disabled, need to add clock operations for each RTC API to make sure accessing RTC registers is successfully. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1590113996-31845-2-git-send-email-Anson.Huang@nxp.com
2020-05-30rtc: snvs: Make SNVS clock always preparedAnson Huang
In IRQ handler, ONLY clock enable/disable is called due to clock prepare can NOT be called in interrupt context, but clock enable/disable will return failure if prepare count is 0, to fix this issue, just make SNVS clock always prepared there, the SNVS clock has no prepare function implemented, so it won't impact anything. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1590113996-31845-1-git-send-email-Anson.Huang@nxp.com
2020-05-29drivers/net/ibmvnic: Update VNIC protocol version reportingThomas Falcon
VNIC protocol version is reported in big-endian format, but it is not byteswapped before logging. Fix that, and remove version comparison as only one protocol version exists at this time. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29nfp: flower: fix incorrect flag assignmentLouis Peens
A previous refactoring missed some locations the flags were renamed but not moved from the previous flower_ext_feats to the new flower_en_feats variable. This lead to the FLOW_MERGE and LAG features not being enabled. Fixes: e09303d3c4d9 ("nfp: flower: renaming of feature bits") Signed-off-by: Louis Peens <louis.peens@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29NFC: st21nfca: add missed kfree_skb() in an error pathChuhong Yuan
st21nfca_tm_send_atr_res() misses to call kfree_skb() in an error path. Add the missed function call to fix it. Fixes: 1892bf844ea0 ("NFC: st21nfca: Adding P2P support to st21nfca in Initiator & Target mode") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29net: ethernet: dwmac: add ethernet glue logic for NXP imx8 chipFugang Duan
NXP imx8 family like imx8mp/imx8dxl chips support Synopsys MAC 5.10a IP. This patch adds settings for NXP imx8 glue layer: - clocks - dwmac address width - phy interface mode selection - adjust rgmii txclk rate v2: - adjust code sequences in order to have reverse christmas tree local variable ordering. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29stmmac: platform: add "snps, dwmac-5.10a" IP compatible stringFugang Duan
Add "snps,dwmac-5.10a" compatible string for 5.10a version that can avoid to define some plat data in glue layer. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29net: dsa: sja1105: avoid invalid state in sja1105_vlan_filteringVladimir Oltean
Be there 2 switches spi/spi2.0 and spi/spi2.1 in a cross-chip setup, both under the same VLAN-filtering bridge, both in the SJA1105_VLAN_BEST_EFFORT state. If we try to change the VLAN state of one of the switches (to SJA1105_VLAN_FILTERING_FULL) we get the following error: devlink dev param set spi/spi2.1 name best_effort_vlan_filtering value false cmode runtime [ 38.325683] sja1105 spi2.1: Not allowed to overcommit frame memory. L2 memory partitions and VL memory partitions share the same space. The sum of all 16 memory partitions is not allowed to be larger than 929 128-byte blocks (or 910 with retagging). Please adjust l2-forwarding-parameters-table.part_spc and/or vl-forwarding-parameters-table.partspc. [ 38.356803] sja1105 spi2.1: Invalid config, cannot upload This is because the spi/spi2.1 switch doesn't support tagging anymore in the SJA1105_VLAN_FILTERING_FULL state, so it doesn't need to have any retagging rules defined. Great, so it can use more frame memory (retagging consumes extra memory). But the built-in low-level static config checker from the sja1105 driver says "not so fast, you've increased the frame memory to non-retagging values, but you still kept the retagging rules in the static config". So we need to rebuild the VLAN table immediately before re-uploading the static config, operation which will take care, based on the new VLAN state, of removing the retagging rules. Fixes: 3f01c91aab92 ("net: dsa: sja1105: implement VLAN retagging for dsa_8021q sub-VLANs") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29Merge tag 'armsoc-fixes-v5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "This time there is one fix for the error path in the mediatek cmdq driver (used by their video driver) and a couple of devicetree fixes, mostly for 32-bit ARM, and fairly harmless: - On OMAP2 there were a few regressions in the ethernet drivers, one of them leading to an external abort trap - One Raspberry Pi version had a misconfigured LED - Interrupts on Broadcom NSP were slightly misconfigured - One i.MX6q board had issues with graphics mode setting - On mmp3 there are some minor fixes that were submitted for v5.8 with a cc:stable tag, so I ended up picking them up here as well - The Mediatek Video Codec needs to run at a higher frequency than configured originally" * tag 'armsoc-fixes-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: mmp3: Drop usb-nop-xceiv from HSIC phy ARM: dts: mmp3-dell-ariel: Fix the SPI devices ARM: dts: mmp3: Use the MMP3 compatible string for /clocks ARM: dts: bcm: HR2: Fix PPI interrupt types ARM: dts: bcm2835-rpi-zero-w: Fix led polarity ARM: dts/imx6q-bx50v3: Set display interface clock parents soc: mediatek: cmdq: return send msg error code arm64: dts: mt8173: fix vcodec-enc clock ARM: dts: Fix wrong mdio clock for dm814x ARM: dts: am437x: fix networking on boards with ksz9031 phy ARM: dts: am57xx: fix networking on boards with ksz9031 phy
2020-05-30Merge remote-tracking branch 'spi/for-5.8' into spi-nextMark Brown
2020-05-30Merge remote-tracking branch 'spi/for-5.7' into spi-linusMark Brown
2020-05-29spi: spi-fsl-dspi: fix native data copyAngelo Dureghello
ColdFire is a big-endian cpu with a big-endian dspi hw module, so, it uses native access, but memcpy breaks the endianness. So, if i understand properly, by native copy we would mean be(cpu)->be(dspi) or le(cpu)->le(dspi) accesses, so my fix shouldn't break anything, but i couldn't test it on LS family, so every test is really appreciated. Fixes: 53fadb4d90c7 ("spi: spi-fsl-dspi: Simplify bytes_per_word gymnastics") Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20200529195756.184677-1-angelo.dureghello@timesys.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29Merge branch 'qiushi-wu-mdev-ref-v1' into v5.8/vfio/nextAlex Williamson
2020-05-29vfio/mdev: Fix reference count leak in add_mdev_supported_typeQiushi Wu
kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Thus, replace kfree() by kobject_put() to fix this issue. Previous commit "b8eb718348b8" fixed a similar problem. Fixes: 7b96953bc640 ("vfio: Mediated device Core driver") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-05-29Merge branch 'mlx5-next' of ↵Saeed Mahameed
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux net/mlx5: Add ability to read and write ECE options net/mlx5: Add support for RDMA TX FT headers modifying net/mlx5: Move iseg access helper routines close to mlx5_core driver net/mlx5: Cleanup mlx5_ifc_fte_match_set_misc2_bits net/mlx5: Add support in forward to namespace {IB/net}/mlx5: Simplify don't trap code net/mlx5: Replace zero-length array with flexible-array Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29Merge tag 'iommu-fixes-v5.7-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Two build fixes for issues introduced during the merge window - A fix for a reference count leak in an error path of iommu_group_alloc() * tag 'iommu-fixes-v5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: Fix reference count leak in iommu_group_alloc. x86: Hide the archdata.iommu field behind generic IOMMU_API ia64: Hide the archdata.iommu field behind generic IOMMU_API
2020-05-29Merge tag 'block-5.7-2020-05-29' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Two small fixes: - Revert a block change that mixed up the return values for non-mq devices - NVMe poll race fix" * tag 'block-5.7-2020-05-29' of git://git.kernel.dk/linux-block: Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT" nvme-pci: avoid race between nvme_reap_pending_cqes() and nvme_poll()
2020-05-29Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "Nothing profound here, just a last set of long standing bug fixes: - Incorrect error unwind in qib and pvrdma - User triggerable NULL pointer crash in mlx5 with ODP prefetch - syzkaller RCU race in uverbs - Rare double free crash in ipoib" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/ipoib: Fix double free of skb in case of multicast traffic in CM mode RDMA/core: Fix double destruction of uobject RDMA/pvrdma: Fix missing pci disable in pvrdma_pci_probe() RDMA/mlx5: Fix NULL pointer dereference in destroy_prefetch_work IB/qib: Call kobject_put() when kobject_init_and_add() fails
2020-05-29Merge tag 'mmc-v5.7-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fix use-after-free issue for rpmb partition MMC host: - Fix quirk for broken CQE support" * tag 'mmc-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: block: Fix use-after-free issue for rpmb mmc: sdhci: Fix SDHCI_QUIRK_BROKEN_CQE
2020-05-29Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Two fixes for the new SM8150 and SM8250 Qualcomm clk drivers to fix a randconfig build error and an incorrect parent mapping" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: gcc: Fix parent for gpll0_out_even clk: qcom: sm8250 gcc depends on QCOM_GDSC
2020-05-29net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()Pablo Neira Ayuso
The drivers reports EINVAL to userspace through netlink on invalid meta match. This is confusing since EINVAL is usually reserved for malformed netlink messages. Replace it by more meaningful codes. Fixes: 6d65bc64e232 ("net/mlx5e: Add mlx5e_flower_parse_meta support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29net/mlx5e: Fix MLX5_TC_CT dependenciesVlad Buslov
Change MLX5_TC_CT config dependencies to include MLX5_ESWITCH instead of MLX5_CORE_EN && NET_SWITCHDEV, which are already required by MLX5_ESWITCH. Without this change mlx5 fails to compile if user disables MLX5_ESWITCH without also manually disabling MLX5_TC_CT. Fixes: 4c3844d9e97e ("net/mlx5e: CT: Introduce connection tracking") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29net/mlx5e: Properly set default values when disabling adaptive moderationTal Gilboa
Add a call to mlx5e_reset_rx/tx_moderation() when enabling/disabling adaptive moderation, in order to select the proper default values. In order to do so, we separate the logic of selecting the moderation values and setting moderion mode (CQE/EQE based). Fixes: 0088cbbc4b66 ("net/mlx5e: Enable CQE based moderation on TX CQ") Fixes: 9908aa292971 ("net/mlx5e: CQE based moderation") Signed-off-by: Tal Gilboa <talgi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
generated by cgit (git 2.34.1) at 2025-09-14 10:30:14 +0000