| Age | Commit message (Collapse) | Author |
|---|
|
TCP/UDP checksum validity was propagated to skb
only if IP checksum is valid.
But for IPv6 there is no validity as there is no checksum in IPv6.
This patch propagates TCP/UDP checksum validity regardless of IP checksum.
Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The bug that Stan reported is as follows. After a restart, a 16-bit NIC
may be incorrectly identified as a 32-bit NIC and stop working.
mac8390 slot.E: Memory length resource not found, probing
mac8390 slot.E: Farallon EtherMac II-C (type farallon)
mac8390 slot.E: MAC 00:00:c5:30:c2:99, IRQ 61, 32 KB shared memory at 0xfeed0000, 32-bit access.
The bug never arises after a cold start and only intermittently after a
warm start. (I didn't investigate why the bug is intermittent.)
It turns out that memcpy_toio() is deprecated and memcmp_withio() also
has issues. Replacing these calls with mmio accessors fixes the problem.
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Fixes: 2964db0f5904 ("m68k: Mac DP8390 update")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similarly to commit a7603ac1fc8c ("geneve: change NET_UDP_TUNNEL
dependency to select"), GTP has a dependency on NET_UDP_TUNNEL which
makes impossible to compile it if no other protocol depending on
NET_UDP_TUNNEL is selected.
Fix this by changing the depends to a select, and drop NET_IP_TUNNEL from
the select list, as it already depends on NET_UDP_TUNNEL.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We assumed that vm_mmap() would reject an attempt to mmap past the end of
the filp (our object), but we were wrong.
Applications that tried to use the mmap beyond the end of the object
would be greeted by a SIGBUS. After this patch, those applications will
be told about the error on creating the mmap, rather than at a random
moment on later access.
Reported-by: Antonio Argenziano <antonio.argenziano@intel.com>
Testcase: igt/gem_mmap/bad-size
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Antonio Argenziano <antonio.argenziano@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314075829.16838-1-chris@chris-wilson.co.uk
(cherry picked from commit 794a11cb67201ad1bb61af510bb8460280feb3f3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
ffs() is 1-indexed, but we want to use it as an index into an array, so
use __ffs() instead.
Fixes: eb8d0f5af4ec ("drm/i915: Remove GPU reset dependence on struct_mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190315163933.19352-1-chris@chris-wilson.co.uk
(cherry picked from commit 9073e5b26743b8b675cc44a9c0c8f8c3d584e1c0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We rely on VBT DDI port info for eDP detection on GEN9 platforms and
above. This breaks GEN9 platforms which don't have VBT because port A
eDP now defaults to false. Fix this by defaulting to true when VBT is
missing.
Fixes: a98d9c1d7e9b ("drm/i915/ddi: Rely on VBT DDI port info for eDP detection")
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306200618.17405-1-thomas.preston@codethink.co.uk
(cherry picked from commit 2131bc0ced6088648e47f126566c3da58b07e4ef)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In some cases, the iscsi_remove_session() function is called while an
unbind_work operation is still running. This may cause a situation where
sysfs objects are removed in an incorrect order, triggering a kernel
warning.
[ 605.249442] ------------[ cut here ]------------
[ 605.259180] sysfs group 'power' not found for kobject 'target2:0:0'
[ 605.321371] WARNING: CPU: 1 PID: 26794 at fs/sysfs/group.c:235 sysfs_remove_group+0x76/0x80
[ 605.341266] Modules linked in: dm_service_time target_core_user target_core_pscsi target_core_file target_core_iblock iscsi_target_mod target_core_mod nls_utf8 isofs ppdev bochs_drm nfit ttm libnvdimm drm_kms_helper syscopyarea sysfillrect sysimgblt joydev pcspkr fb_sys_fops drm i2c_piix4 sg parport_pc parport xfs libcrc32c dm_multipath sr_mod sd_mod cdrom ata_generic 8021q garp mrp ata_piix stp crct10dif_pclmul crc32_pclmul llc libata crc32c_intel virtio_net net_failover ghash_clmulni_intel serio_raw failover sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi
[ 605.627479] CPU: 1 PID: 26794 Comm: kworker/u32:2 Not tainted 4.18.0-60.el8.x86_64 #1
[ 605.721401] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014
[ 605.823651] Workqueue: scsi_wq_2 __iscsi_unbind_session [scsi_transport_iscsi]
[ 605.830940] RIP: 0010:sysfs_remove_group+0x76/0x80
[ 605.922907] Code: 48 89 df 5b 5d 41 5c e9 38 c4 ff ff 48 89 df e8 e0 bf ff ff eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 38 73 cb a7 e8 24 77 d7 ff <0f> 0b 5b 5d 41 5c c3 0f 1f 00 0f 1f 44 00 00 41 56 41 55 41 54 55
[ 606.122304] RSP: 0018:ffffbadcc8d1bda8 EFLAGS: 00010286
[ 606.218492] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 606.326381] RDX: ffff98bdfe85eb40 RSI: ffff98bdfe856818 RDI: ffff98bdfe856818
[ 606.514498] RBP: ffffffffa7ab73e0 R08: 0000000000000268 R09: 0000000000000007
[ 606.529469] R10: 0000000000000000 R11: ffffffffa860d9ad R12: ffff98bdf978e838
[ 606.630535] R13: ffff98bdc2cd4010 R14: ffff98bdc2cd3ff0 R15: ffff98bdc2cd4000
[ 606.824707] FS: 0000000000000000(0000) GS:ffff98bdfe840000(0000) knlGS:0000000000000000
[ 607.018333] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 607.117844] CR2: 00007f84b78ac024 CR3: 000000002c00a003 CR4: 00000000003606e0
[ 607.117844] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 607.420926] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 607.524236] Call Trace:
[ 607.530591] device_del+0x56/0x350
[ 607.624393] ? ata_tlink_match+0x30/0x30 [libata]
[ 607.727805] ? attribute_container_device_trigger+0xb4/0xf0
[ 607.829911] scsi_target_reap_ref_release+0x39/0x50
[ 607.928572] scsi_remove_target+0x1a2/0x1d0
[ 608.017350] __iscsi_unbind_session+0xb3/0x160 [scsi_transport_iscsi]
[ 608.117435] process_one_work+0x1a7/0x360
[ 608.132917] worker_thread+0x30/0x390
[ 608.222900] ? pwq_unbound_release_workfn+0xd0/0xd0
[ 608.323989] kthread+0x112/0x130
[ 608.418318] ? kthread_bind+0x30/0x30
[ 608.513821] ret_from_fork+0x35/0x40
[ 608.613909] ---[ end trace 0b98c310c8a6138c ]---
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Acked-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Now that we have alloc_size that controls our discard behavior, it
doesn't make sense to have these set to object (set) size. alloc_size
defaults to 64k, but because discard_granularity is likely 4M, only
ranges that are equal to or bigger than 4M can be considered during
fstrim. A smaller io_min is also more likely to be met, resulting in
fewer deferred writes on bluestore OSDs.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
|
|
NV12 framebuffers produced by the VPU shows distorted on RK3288
after win has been disabled when scaling is active.
This issue can be reproduced using a 1080p modeset by:
- Scale a 1280x720 NV12 framebuffer to 1920x1080 on win0
- Disable win0
- Display a 1920x1080 NV12 framebuffer without scaling on win0
- Output will now show the framebuffer distorted
And by:
- Scale a 1280x720 NV12 framebuffer to 1920x1080
- Change to a 720p modeset (win gets disabled and scaling reset to none)
- Output will now show the framebuffer distorted
Fix this by setting scale mode to none when win is disabled.
Fixes: 4c156c21c794 ("drm/rockchip: vop: support plane scale")
Cc: stable@vger.kernel.org
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/AM3PR03MB0966DE3E19BACE07328CD637AC7D0@AM3PR03MB0966.eurprd03.prod.outlook.com
|
|
This pull request brings in a build fix for arm64 with bcm2835
enabled, and fixes the driver in the presence of -EPROBE_DEFER.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Before, ec->data_buffer could be written to from multiple
contexts at the same time. Since the ec is shared data,
it needs to be inside the mutex as well.
Fixes: 7b3d4f44abf0 ("platform/chrome: Add new driver for Wilco EC")
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
|
|
kthread name only allows 15 characters (TASK_COMMON_LEN is 16).
Thus rename the kthreads created by intel_powerclamp driver from
"kidle_inject/ + decimal cpuid" to "kidle_inj/ + decimal cpuid"
to avoid truncated kthead name for cpu 100 and later.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
The mtk_thermal struct contains a 'struct mtk_thermal_bank banks[];',
but the allocation only allocates sizeof(struct mtk_thermal) bytes,
which cause out of bound access with the ->banks[] member. Change it to
a fixed size array instead.
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Commit 758a58d0bc67 ("loop: set GENHD_FL_NO_PART_SCAN after
blkdev_reread_part()") separates "lo->lo_backing_file = NULL" and
"lo->lo_state = Lo_unbound" into different critical regions protected by
loop_ctl_mutex.
However, there is below race that the NULL lo->lo_backing_file would be
accessed when the backend of a loop is another loop device, e.g., loop0's
backend is a file, while loop1's backend is loop0.
loop0's backend is file loop1's backend is loop0
__loop_clr_fd()
mutex_lock(&loop_ctl_mutex);
lo->lo_backing_file = NULL; --> set to NULL
mutex_unlock(&loop_ctl_mutex);
loop_set_fd()
mutex_lock_killable(&loop_ctl_mutex);
loop_validate_file()
f = l->lo_backing_file; --> NULL
access if loop0 is not Lo_unbound
mutex_lock(&loop_ctl_mutex);
lo->lo_state = Lo_unbound;
mutex_unlock(&loop_ctl_mutex);
lo->lo_backing_file should be accessed only when the loop device is
Lo_bound.
In fact, the problem has been introduced already in commit 7ccd0791d985
("loop: Push loop_ctl_mutex down into loop_clr_fd()") after which
loop_validate_file() could see devices in Lo_rundown state with which it
did not count. It was harmless at that point but still.
Fixes: 7ccd0791d985 ("loop: Push loop_ctl_mutex down into loop_clr_fd()")
Reported-by: syzbot+9bdc1adc1c55e7fe765b@syzkaller.appspotmail.com
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
int3400 only pushes the UUID into the firmware when the mode is flipped
to "enable". The current code only exposes the mode flag if the firmware
supports the PASSIVE_1 UUID, which not all machines do. Remove the
restriction.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Add more supported DPTF policies than the driver currently exposes.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Cc: Nisha Aram <nisha.aram@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
The 'cur_freq' local variable became unused after commit 84fe2cab4859
("cpu_cooling: Drop static-power related stuff"), let's remove it.
Cc: Amit Daniel Kachhap <amit.kachhap@gmail.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Javi Merino <javi.merino@kernel.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
"cat /sys/kernel/debug/bcm2835_thermal/regset" causes a NULL pointer
dereference in bcm2835_thermal_debugfs. The driver makes use of the
implementation details of the thermal framework to retrieve a pointer
to its private data from a struct thermal_zone_device, and gets it
wrong - leading to the crash. Instead, store its private data as the
drvdata and retrieve the thermal_zone_device pointer from it.
Fixes: bcb7dd9ef206 ("thermal: bcm2835: add thermal driver for bcm2835 SoC")
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Merge commit 19785cf93b6c ("Merge branch 'linus' of
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal")
broke the code introduced by commit ffe6e16f14fa ("thermal: exynos: Reduce
severity of too early temperature read"). Restore the original code from
the mentioned commit to finally fix the warning message during boot:
thermal thermal_zone0: failed to read out thermal zone (-22)
Reported-by: Marian Mihailescu <mihailescu2m@gmail.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 19785cf93b6c ("Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal")
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
This variable is declared as:
static struct powerclamp_worker_data * __percpu worker_data;
In other words, a percpu pointer to struct ...
But this variable not used like so but as a pointer to a percpu
struct powerclamp_worker_data.
So fix the declaration as:
static struct powerclamp_worker_data __percpu *worker_data;
This also quiets Sparse's warnings from __verify_pcpu_ptr(), like:
494:49: warning: incorrect type in initializer (different address spaces)
494:49: expected void const [noderef] <asn:3> *__vpp_verify
494:49: got struct powerclamp_worker_data *
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
The driver allocates queues for all the units it potentially
supports. But if we fail to detect any drives, then we fail
loading the module without cleaning up those queues. This is
now evident with the switch to blk-mq, though the bug has
been there forever as far as I can tell.
Also fix cleanup through regular module exit.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The driver allocates queues for all the units it potentially
supports. But if we fail to detect any drives, then we fail
loading the module without cleaning up those queues. This is
now evident with the switch to blk-mq, though the bug has
been there forever as far as I can tell.
Also fix cleanup through regular module exit.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Take into account that sg->offset can be bigger than PAGE_SIZE when
setting segment sg->dma_address. Otherwise sg->dma_address will point
at diffrent page, what makes DMA not possible with erros like this:
xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa70c0 flags=0x0020]
xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7040 flags=0x0020]
xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7080 flags=0x0020]
xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7100 flags=0x0020]
xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7000 flags=0x0020]
Additinally with wrong sg->dma_address unmap_sg will free wrong pages,
what what can cause crashes like this:
Feb 28 19:27:45 kernel: BUG: Bad page state in process cinnamon pfn:39e8b1
Feb 28 19:27:45 kernel: Disabling lock debugging due to kernel taint
Feb 28 19:27:45 kernel: flags: 0x2ffff0000000000()
Feb 28 19:27:45 kernel: raw: 02ffff0000000000 0000000000000000 ffffffff00000301 0000000000000000
Feb 28 19:27:45 kernel: raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
Feb 28 19:27:45 kernel: page dumped because: nonzero _refcount
Feb 28 19:27:45 kernel: Modules linked in: ccm fuse arc4 nct6775 hwmon_vid amdgpu nls_iso8859_1 nls_cp437 edac_mce_amd vfat fat kvm_amd ccp rng_core kvm mt76x0u mt76x0_common mt76x02_usb irqbypass mt76_usb mt76x02_lib mt76 crct10dif_pclmul crc32_pclmul chash mac80211 amd_iommu_v2 ghash_clmulni_intel gpu_sched i2c_algo_bit ttm wmi_bmof snd_hda_codec_realtek snd_hda_codec_generic drm_kms_helper snd_hda_codec_hdmi snd_hda_intel drm snd_hda_codec aesni_intel snd_hda_core snd_hwdep aes_x86_64 crypto_simd snd_pcm cfg80211 cryptd mousedev snd_timer glue_helper pcspkr r8169 input_leds realtek agpgart libphy rfkill snd syscopyarea sysfillrect sysimgblt fb_sys_fops soundcore sp5100_tco k10temp i2c_piix4 wmi evdev gpio_amdpt pinctrl_amd mac_hid pcc_cpufreq acpi_cpufreq sg ip_tables x_tables ext4(E) crc32c_generic(E) crc16(E) mbcache(E) jbd2(E) fscrypto(E) sd_mod(E) hid_generic(E) usbhid(E) hid(E) dm_mod(E) serio_raw(E) atkbd(E) libps2(E) crc32c_intel(E) ahci(E) libahci(E) libata(E) xhci_pci(E) xhci_hcd(E)
Feb 28 19:27:45 kernel: scsi_mod(E) i8042(E) serio(E) bcache(E) crc64(E)
Feb 28 19:27:45 kernel: CPU: 2 PID: 896 Comm: cinnamon Tainted: G B W E 4.20.12-arch1-1-custom #1
Feb 28 19:27:45 kernel: Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B450M Pro4, BIOS P1.20 06/26/2018
Feb 28 19:27:45 kernel: Call Trace:
Feb 28 19:27:45 kernel: dump_stack+0x5c/0x80
Feb 28 19:27:45 kernel: bad_page.cold.29+0x7f/0xb2
Feb 28 19:27:45 kernel: __free_pages_ok+0x2c0/0x2d0
Feb 28 19:27:45 kernel: skb_release_data+0x96/0x180
Feb 28 19:27:45 kernel: __kfree_skb+0xe/0x20
Feb 28 19:27:45 kernel: tcp_recvmsg+0x894/0xc60
Feb 28 19:27:45 kernel: ? reuse_swap_page+0x120/0x340
Feb 28 19:27:45 kernel: ? ptep_set_access_flags+0x23/0x30
Feb 28 19:27:45 kernel: inet_recvmsg+0x5b/0x100
Feb 28 19:27:45 kernel: __sys_recvfrom+0xc3/0x180
Feb 28 19:27:45 kernel: ? handle_mm_fault+0x10a/0x250
Feb 28 19:27:45 kernel: ? syscall_trace_enter+0x1d3/0x2d0
Feb 28 19:27:45 kernel: ? __audit_syscall_exit+0x22a/0x290
Feb 28 19:27:45 kernel: __x64_sys_recvfrom+0x24/0x30
Feb 28 19:27:45 kernel: do_syscall_64+0x5b/0x170
Feb 28 19:27:45 kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9
Cc: stable@vger.kernel.org
Reported-and-tested-by: Jan Viktorin <jan.viktorin@gmail.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Fixes: 80187fd39dcb ('iommu/amd: Optimize map_sg and unmap_sg')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Building with clang finds a mistaken __init tag:
WARNING: vmlinux.o(.text+0x5e4250): Section mismatch in reference from the function davinci_mmcsd_probe() to the function .init.text:init_mmcsd_host()
The function davinci_mmcsd_probe() references
the function __init init_mmcsd_host().
This is often because davinci_mmcsd_probe lacks a __init
annotation or the annotation of init_mmcsd_host is wrong.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
clang points out several instances of mismatched types in this drivers,
all coming from a single declaration:
drivers/mmc/host/pxamci.c:193:15: error: implicit conversion from enumeration type 'enum dma_transfer_direction' to
different enumeration type 'enum dma_data_direction' [-Werror,-Wenum-conversion]
direction = DMA_DEV_TO_MEM;
~ ^~~~~~~~~~~~~~
drivers/mmc/host/pxamci.c:212:62: error: implicit conversion from enumeration type 'enum dma_data_direction' to
different enumeration type 'enum dma_transfer_direction' [-Werror,-Wenum-conversion]
tx = dmaengine_prep_slave_sg(chan, data->sg, host->dma_len, direction,
The behavior is correct, so this must be a simply typo from
dma_data_direction and dma_transfer_direction being similarly named
types with a similar purpose.
Fixes: 6464b7140951 ("mmc: pxamci: switch over to dmaengine use")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
If drm_gem_handle_create() fails in vkms_gem_create(), then the
vkms_gem_object is freed twice: once when the reference is dropped by
drm_gem_object_put_unlocked(), and again by the extra calls to
drm_gem_object_release() and kfree().
Fix it by skipping the second release and free.
This bug was originally found in the vgem driver by syzkaller using
fault injection, but I noticed it's also present in the vkms driver.
Fixes: 559e50fd34d1 ("drm/vkms: Add dumb operations")
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226220858.214438-1-ebiggers@kernel.org
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
If drm_gem_handle_create() fails in vgem_gem_create(), then the
drm_vgem_gem_object is freed twice: once when the reference is dropped
by drm_gem_object_put_unlocked(), and again by __vgem_gem_destroy().
This was hit by syzkaller using fault injection.
Fix it by skipping the second free.
Reported-by: syzbot+e73f2fb5ed5a5df36d33@syzkaller.appspotmail.com
Fixes: af33a9190d02 ("drm/vgem: Enable dmabuf import interfaces")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226214451.195123-1-ebiggers@kernel.org
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Add depends on PCI for PCI_MT7621
Signed-off-by: Maxim Zhukov <mussitantesmortem@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When switching from speakup_soft to another synth, speakup_soft would
keep calling synth_buffer_getc() from softsynthx_read.
Let's thus make synth.c export the knowledge of the current synth, so
that speakup_soft can determine whether it should be running.
speakup_soft also needs to set itself alive, otherwise the switch would
let it remain silent.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When building without CONFIG_OF, the compiler loses track of the flow
control in axis_fifo_probe(), and thinks that many variables are used
without an initialization even though we actually leave the function
before the first use:
drivers/staging/axis-fifo/axis-fifo.c: In function 'axis_fifo_probe':
drivers/staging/axis-fifo/axis-fifo.c:900:5: error: 'rxd_tdata_width' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (rxd_tdata_width != 32) {
^
drivers/staging/axis-fifo/axis-fifo.c:907:5: error: 'txd_tdata_width' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (txd_tdata_width != 32) {
^
drivers/staging/axis-fifo/axis-fifo.c:914:5: error: 'has_tdest' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (has_tdest) {
^
drivers/staging/axis-fifo/axis-fifo.c:919:5: error: 'has_tid' may be used uninitialized in this function [-Werror=maybe-uninitialized]
When CONFIG_OF is set, this does not happen, and since the driver cannot
work without it, just add that option as a Kconfig dependency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
gcc noticed a mismatch between the type qualifiers after a recent
cleanup:
drivers/staging/olpc_dcon/olpc_dcon_xo_1.c: In function 'dcon_init_xo_1':
drivers/staging/olpc_dcon/olpc_dcon_xo_1.c:48:26: error: initialization discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
Add the 'const' keyword that should have been there all along.
Fixes: 2159fb372929 ("staging: olpc_dcon: olpc_dcon_xo_1.c: Switch to the gpio descriptor interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
`ni_cdio_cmdtest()` validates Comedi asynchronous commands for the DIO
subdevice (subdevice 2) of supported National Instruments M-series
cards. It is called when handling the `COMEDI_CMD` and `COMEDI_CMDTEST`
ioctls for this subdevice. There are two causes for a possible
divide-by-zero error when validating that the `stop_arg` member of the
passed-in command is not too large.
The first cause for the divide-by-zero is that calls to
`comedi_bytes_per_scan()` are only valid once the command has been
copied to `s->async->cmd`, but that copy is only done for the
`COMEDI_CMD` ioctl. For the `COMEDI_CMDTEST` ioctl, it will use
whatever was left there by the previous `COMEDI_CMD` ioctl, if any.
(This is very likely, as it is usual for the application to use
`COMEDI_CMDTEST` before `COMEDI_CMD`.) If there has been no previous,
valid `COMEDI_CMD` for this subdevice, then `comedi_bytes_per_scan()`
will return 0, so the subsequent division in `ni_cdio_cmdtest()` of
`s->async->prealloc_bufsz / comedi_bytes_per_scan(s)` will be a
divide-by-zero error. To fix this error, call a new function
`comedi_bytes_per_scan_cmd(s, cmd)`, based on the existing
`comedi_bytes_per_scan(s)` but using a specified `struct comedi_cmd` for
its calculations. (Also refactor `comedi_bytes_per_scan()` to call the
new function.)
Once the first cause for the divide-by-zero has been fixed, the second
cause is that `comedi_bytes_per_scan_cmd()` can legitimately return 0 if
the `scan_end_arg` member of the `struct comedi_cmd` being tested is 0.
Fix it by only performing the division (and validating that `stop_arg`
is no more than the maximum value) if `comedi_bytes_per_scan_cmd()`
returns a non-zero value.
The problem was reported on the COMEDI mailing list here:
https://groups.google.com/forum/#!topic/comedi_list/4t9WlHzMhKM
Reported-by: Ivan Vasilyev <grabesstimme@gmail.com>
Tested-by: Ivan Vasilyev <grabesstimme@gmail.com>
Fixes: f164cbf98fa8 ("staging: comedi: ni_mio_common: add finite regeneration to dio output")
Cc: <stable@vger.kernel.org> # 4.6+
Cc: Spencer E. Olson <olsonse@umich.edu>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
erofs_vmap() wrapped vmap() and vm_map_ram() to return virtual
continuous memory, but both of them can failed due to a lot of
reason, previously, erofs_vmap()'s callers didn't handle them,
which can potentially cause NULL pointer access, fix it.
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Fixes: 0d40d6e399c1 ("staging: erofs: add a generic z_erofs VLE decompressor")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ethernet in mt7621 is now supported by
drivers/net/ethernet/mediatek/
which provides support for the integrated switch through DSA.
This requires some devicetree changes, and particularly allows
a board dts to identify which switch ports are present.
The second CPU interface - gmac1 - doesn't work yet, so the device
tree information may not be correct. The phy (which is present on the
gnubee-pc2) can negotiate and report connection speed etc, but no
traffic flows.
The gnubee-pc1 has two network ports which are 'black' and 'blue'.
There are connected to switch ports 0 and 4 respectively.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
driver/net/ethernet/mediatek/ now supports this hardware,
so we don't need a separate driver.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a panic reported that on a system with x722 ethernet, when doing
the operations like:
# ip link add br0 type bridge
# ip link set eno1 master br0
# systemctl restart systemd-networkd
The system will panic "BUG: unable to handle kernel null pointer
dereference at 0000000000000034", with call chain:
i40iw_inetaddr_event
notifier_call_chain
blocking_notifier_call_chain
notifier_call_chain
__inet_del_ifa
inet_rtm_deladdr
rtnetlink_rcv_msg
netlink_rcv_skb
rtnetlink_rcv
netlink_unicast
netlink_sendmsg
sock_sendmsg
__sys_sendto
It is caused by "local_ipaddr = ntohl(in->ifa_list->ifa_address)", while
the in->ifa_list is NULL.
So add a check for the "in->ifa_list == NULL" case, and skip the ARP
operation accordingly.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Add mapping of link mode: CAUI4 100Gbps CR4/KR4 with 4 lines and 25Gbps.
Fix mapping of link mode: GAUI2 50Gbps CR2/KR2 to be 2 lines with 25Gbps.
Fixes: 08e8676f1607 ("IB/mlx5: Add support for 50Gbps per lane link modes")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
To prevent a hardware memory leak when a DEVX DCT object is destroyed
without calling DRAIN DCT before, (e.g. under cleanup flow), need to
manage its creation and destruction via mlx5 core.
In that case the DRAIN DCT command will be called and only once that it
will be completed the DESTROY DCT command will be called. Otherwise, the
DESTROY DCT may fail and a hardware leak may occur.
As of that change the DRAIN DCT command should not be exposed any more
from DEVX, it's managed internally by the driver to work as expected by
the device specification.
Fixes: 7efce3691d33 ("IB/mlx5: Add obj create and destroy functionality")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
In case the DCT creation command has succeeded a DRAIN must be issued
before calling DESTROY.
In addition, the original code used the wrong parameter for the DESTROY
command, 'in' instead of 'din', which caused another creation try instead
of destroying.
Cc: <stable@vger.kernel.org> # 4.15
Fixes: 57cda166bbe0 ("net/mlx5: Add DCT command interface")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Code review revealed a race condition which could allow the catas error
flow to interrupt the alias guid query post mechanism at random points.
Thiis is fixed by doing cancel_delayed_work_sync() instead of
cancel_delayed_work() during the alias guid mechanism destroy flow.
Fixes: a0c64a17aba8 ("mlx4: Add alias_guid mechanism")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
When Daniel removed struct_mutex he didn't fix this call to the unlocked
variant which is required since we no longer use struct mutex.
This fixes a bunch of:
WARNING: CPU: 4 PID: 1370 at drivers/gpu/drm/drm_gem.c:931 drm_gem_object_put+0x2b/0x30 [drm]
Modules linked in: udl xt_CHECKSUM ipt_MASQUERADE tun bridge stp llc nf_conntrack_netbios_ns nf_conntrack_broadcast xt_CT ip6t>
CPU: 4 PID: 1370 Comm: Xorg Not tainted 5.0.0+ #2
backtraces when you plug in a udl device.
Fixes: ae358dacd217 (drm/udl: Get rid of dev->struct_mutex usage)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A fix for a Xen bug introduced by David's series for excluding
ballooned pages in vmcores"
* tag 'for-linus-5.1b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/balloon: Fix mapping PG_offline pages to user space
|
|
The charlcd driver currently flashes the backlight once on init.
This may not be desirable. Thus, add options for turning the
backlight off or on as well.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
If CONFIG_PANEL_CHANGE_MESSAGE is set, CONFIG_PANEL_BOOT_MESSAGE will
also be defined, so the double ifdef is pointless. Simplify the code
further by using an intermediate macro rather duplicating most of the
line.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
The auxdisplay Kconfig is confusing. It creates two separate menus
even though the settings are closely related. Moreover, the options
for setting the boot message depend on CONFIG_PARPORT even though they
are used by drivers that do not.
Clear up the confusion by moving the "Parallel port LCD/Keypad" menu
under auxdisplay where it logically belongs. Change the boot message
options to depend only on CONFIG_CHARLCD, making them accessible also
when only the HD44780 is selected.
Since the "Parallel port LCD/Keypad" driver now has a new dependency
on CONFIG_AUXDISPLAY, rename its Kconfig symbol and keep the old one
such that make oldconfig will not disable the driver.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
Convert to use charlcd_free() instead of kfree() for sake of type check.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
Convert to use charlcd_free() instead of kfree() for sake of type check.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
The charlcd_free() is a counterpart to charlcd_alloc()
and should be called symmetrically on tear down.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
In order to be more particular in names, rename to_priv() macro
to charlcd_to_priv().
No functional change intended.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
