summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2014-06-02hpsa: remove unused fields from struct ctlr_infoStephen M. Cameron
The fields "major", "max_outstanding", and "usage_count" of struct ctlr_info were not used for anything. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reviewed-by: Mike Miller <michael.miller@canonical.com> Reviewed-by: Webb Scales <webb.scales@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02mvsas: Recognise device/subsystem 9485/9485 as 88SE9485Ben Hutchings
Matt Taggart reported that mvsas didn't bind to the Marvell SAS controller on a Supermicro AOC-SAS2LP-MV8 board. lspci reports it as: 01:00.0 RAID bus controller [0104]: Marvell Technology Group Ltd. Device [1b4b:9485] (rev 03) Subsystem: Marvell Technology Group Ltd. Device [1b4b:9485] [...] Add it to the device table as chip_9485. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Reported-by: Matt Taggart <taggart@debian.org> Tested-by: Matt Taggart <taggart@debian.org> Acked-By: Jan "Yenya" Kasprzak <kas@fi.muni.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02Revert "be2iscsi: Fix processing cqe for cxn whose endpoint is freed"Christoph Hellwig
This reverts commit 11206081ad895d83e717bfe23603168dc307d904. Based on comments from Mike Christie and Sony John-N.
2014-06-02Revert "net/mlx4_en: Use affinity hint"David S. Miller
This reverts commit 70a640d0dae3a9b1b222ce673eb5d92c263ddd61. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02net: ks8851: Don't use regulator_get_optional()Stephen Boyd
We shouldn't be using regulator_get_optional() here. These regulators are always present as part of the physical design and there isn't any way to use an internal regulator or change the source of the reference voltage via software. Given that the only users of this driver in the kernel are DT based, this change should be transparent to them even if they don't specify any supplies because the regulator framework will insert dummy supplies as needed. Cc: Nishanth Menon <nm@ti.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Mark Brown <broonie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02drm/exynos: consider deferred probe caseInki Dae
This patch makes sure that exynos drm framework handles deferred probe case correctly. Sub drivers could be probed before resources, clock, regulator, phy or panel, are ready for them so we should make sure that exynos drm core waits until all resources are ready and sub drivers are probed correctly. Chagelog v2: - Make sure that exynos drm core tries to bind sub drivers only in case that they have a pair: crtc and encoder/connector components should be a pair. - Remove unnecessary patch: drm/exynos: mipi-dsi: consider panel driver-deferred probe - Return error type correctly. Signed-off-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
2014-06-02drm/exynos: remove unnecessary exynos_hdmi.h fileJingoo Han
The exynos_hdmi.h has been used for the dedicated i2c drivers that were already removed. Thus, the unnecessary exynos_hdmi.h should be removed. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-01net: Revert mlx4 cpumask changes.David S. Miller
This reverts commit 70a640d0dae3a9b1b222ce673eb5d92c263ddd61 ("net/mlx4_en: Use affinity hint") and commit c8865b64b05b2f4eeefd369373e9c8aeb069e7a1 ("cpumask: Utility function to set n'th cpu - local cpu first") because these changes break the build when SMP is disabled amongst other things. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02drm/crtc-helper: skip locking checks in panicking pathSergei Antonov
Skip locking checks in drm_helper_*_in_use() if they are called in panicking path. See similar code in drm_warn_on_modeset_not_all_locked(). After panic information has been output, these WARN_ONs go off outputing a lot of lines and scrolling the panic information out of the screen. Here is a partial call trace showing how execution reaches them: ? drm_helper_crtc_in_use() ? __drm_helper_disable_unused_functions() ? several *_set_config functions ? drm_fb_helper_restore_fbdev_mode() Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sergei Antonov <saproj@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-02drm/radeon/dpm: resume fixes for some systemsAlex Deucher
Setting the power state prior to restoring the display hardware leads to blank screens on some systems. Drop the power state set from dpm resume. The power state will get set as part of the mode set sequence. Also add an explicit power state set after mode set resume to cover PX and headless systems. bug: https://bugzilla.kernel.org/show_bug.cgi?id=76761 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-01net: ks8851: Don't use regulator_get_optional()Stephen Boyd
We shouldn't be using regulator_get_optional() here. These regulators are always present as part of the physical design and there isn't any way to use an internal regulator or change the source of the reference voltage via software. Given that the only users of this driver in the kernel are DT based, this change should be transparent to them even if they don't specify any supplies because the regulator framework will insert dummy supplies as needed. Cc: Nishanth Menon <nm@ti.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Mark Brown <broonie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-01net: qmi_wwan: add Netgear AirCard 341UAleksander Morgado
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-01net/mlx4_en: Use affinity hintYuval Atias
The “affinity hint” mechanism is used by the user space daemon, irqbalancer, to indicate a preferred CPU mask for irqs. Irqbalancer can use this hint to balance the irqs between the cpus indicated by the mask. We wish the HCA to preferentially map the IRQs it uses to numa cores close to it. To accomplish this, we use cpumask_set_cpu_local_first(), that sets the affinity hint according the following policy: First it maps IRQs to “close” numa cores. If these are exhausted, the remaining IRQs are mapped to “far” numa cores. Signed-off-by: Yuval Atias <yuvala@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-01staging: skein: fix sparse warning for static declarationsJames A Shackleford
This patch fixes the following sparse warnings: skein_block.c:43:6: warning: symbol 'skein_256_process_block' was not declared. Should it be static? skein_block.c:252:6: warning: symbol 'skein_512_process_block' was not declared. Should it be static? skein_block.c:483:6: warning: symbol 'skein_1024_process_block' was not declared. Should it be static? by including the header skein_block.h, which contains the declarations in question. Signed-off-by: James A Shackleford <shack@linux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-01staging/mt29f_spinand: coding style fixesSimon Boulay
This patch fixes coding style errors reported by checkpatch.pl. It adds new lines after declarations in two places. Signed-off-by: Simon Boulay <simon.boulay@alkeona.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-01staging: silicom: fix sparse warning for static variableJames A Shackleford
This patch fixes the following sparse warning in bpctl_mod.c: warning: symbol 'bpvm_lock' was not declared. Should it be static? Signed-off-by: James A Shackleford <shack@linux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-01i2c: rcar: update copyright and license informationWolfram Sang
Make clear that the driver is GPL v2 only. Remove FSF address. Remove filename in comment. Update copyright information. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01i2c: rcar: janitorial cleanup after refactoringWolfram Sang
Remove some obvious comments, remove some superfluous debug output (the error code carries the same information), some white space fixing... Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01i2c: rcar: reuse status bits as enable bitsWolfram Sang
Status register and enable register are identical regarding their layout. Use the bit definitions for both. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01i2c: rcar: remove spinlockWolfram Sang
The i2c core has per-adapter locks, so no need to protect again. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01i2c: rcar: refactor status bit handlingWolfram Sang
The old macros made it harder to see what was actually happening. Replace them with something more readable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01i2c: rcar: refactor setting up msgWolfram Sang
Setting up a read or write message is similar enough to be done in one function. Also, move a helper function into the new function since it is only used here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01i2c: rcar: check bus free before first messageWolfram Sang
We should always check if the bus is free, independently if it is a read or write. It should be done before the first message, though. After that, we ourselves keep the bus busy. Remove a 'ret' assignment which only silenced a build warning. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01i2c: rcar: refactor irq state machineWolfram Sang
Remove the seperate functions and use designated constants. As readable but less overhead. Actually, this is even more readable since the old function used a mix of "=" and "|=". Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01i2c: rcar: refactor bus state machineWolfram Sang
Remove the seperate functions and use designated constants. As readable but less overhead. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01i2c: rcar: no need to store irq numberWolfram Sang
We use devm, so irq number is only needed during probe. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01i2c: rcar: not everything needs to be a functionWolfram Sang
Very basic operations, just called once, can also go to the caller. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01i2c: sh_mobile: add compatibles for additional SoCWolfram Sang
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01i2c: rcar: add compatibles for additional SoCWolfram Sang
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-01staging: lustre: Fix coding styleJosep Puigdemont
The if block should be placed in a new line rather than after the if statement. Blank line required between variable declarations and code. Signed-off-by: Josep Puigdemont <josep.puigdemont@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-01staging: android: binder.c: Use more appropriate functions for euid retrievalTair Rzayev
Instead of getting the reference to whole credential structure, use task_euid() and current_euid() to get it. Signed-off-by: Tair Rzayev <tair.rzayev@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-01regulator: core: Fix the init of DT defined fixed regulatorsAlban Bedel
When a regulator is defined using DT and it has a single voltage the regulator init always tries to apply this voltage. However it fails if the regulator isn't settable because it is using an internal low level function. To overcome this we now first query the regulator and only set it if needed. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01regulator: core: Disable unused regulators after deferred probing is doneSaravana Kannan
regulator_init_complete does a scan of regulators which dont have always-on or consumers are automatically disabled as being unused. However, with deferred probing, late_initcall() is too soon to declare a regulator as unused as the regulator itself might not have registered due to defferal - Example: A regulator deffered due to i2bus not available which in turn is deffered due to pinctrl availability. Since deferred probing is done in late_initcall(), do the cleanup of unused regulators by regulator_init_complete in late_initcall_sync instead of late_initcall. Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [nm@ti.com: minor rewording] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01regulator: Don't disable unused regulators we don't have permission forMark Brown
In the spirit of conservatism that governs our general approach to permissions it is better if we don't touch regulators we weren't explicitly given permissions to control. This avoids the need to explicitly specify unknown regulators in DT as always on, if a regulator is not otherwise involved in software control it can be omitted from the DT. Regulators explicitly given constraints in DT still need to have an always on constraint specified as before. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01dmaengine: Kconfig: Update MXS_DMA help text to include MX6Q/MX6DLFabio Estevam
The APBX-DMA block is also found on MX6Q/MX6DL chips. Update the help text accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-06-01dmaengine: shdma: Enable driver compilation with COMPILE_TESTLaurent Pinchart
This helps increasing build testing coverage. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-06-01dmaengine: rcar-hpbdma: Include linux/err.hLaurent Pinchart
linux/err.h isn't implicitly included by the current headers on all platforms, resulting in compilation failures due to implicit declarations of IS_ERR and PTR_ERR. Fix this by including linux/err.h. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-06-01dmaengine: sudmac: Include linux/err.hLaurent Pinchart
linux/err.h isn't implicitly included by the current headers on all platforms, resulting in compilation failures due to implicit declarations of IS_ERR and PTR_ERR. Fix this by including linux/err.h. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-06-01dmaengine: sudmac: Keep #include sorted alphabeticallyLaurent Pinchart
This helps detecting duplicate includes. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-06-01dmaengine: shdmac: Include linux/err.hLaurent Pinchart
linux/err.h isn't implicitly included by the current headers on all platforms, resulting in compilation failures due to implicit declarations of IS_ERR and PTR_ERR. Fix this by including linux/err.h. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-06-01dmaengine: shdmac: Keep #include sorted alphabeticallyLaurent Pinchart
This helps detecting duplicate includes. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-06-02drm/exynos/fimd: allow multiplatform configurationAndrzej Hajda
The patch removes dependency on !ARCH_MULTIPLATFORM. This dependency seems to be not longer valid. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: add hdmiphy power on/off sequenceShirish S
This patch implements the power on/off sequence of HDMI PHY in exynos5420 and exynos5250 as provided by the hardware team. This has been verified for mulitple iterations of S2R. Signed-off-by: Shirish S <s.shirish@samsung.com> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: ipp: remove description of non-existing fieldAndrzej Hajda
ipp_id field is removed from exynos_drm_ippdrv struct. The patch removes its description as well. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: ipp: update comment for struct drm_ipp_buf_infoYoungJun Cho
The attribute gem_objs in struct drm_exynos_ipp_buf_info was changed to handles. So the comment needs to be updated also. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: ipp: rearrange c_node->event_lock using routineYoungJun Cho
The c_node->event_list should be protected with c_node->event_lock. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: ipp: rearrange c_node->mem_lock using routinesYoungJun Cho
The c_node->mem_list[] should be protected with c_node->mem_lock. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: ipp: add ipp_remove_id()YoungJun Cho
This patch adds ipp_remove_id() for idr resource free. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: ipp: add cmd_lock for cmd_listYoungJun Cho
This patch adds cmd_lock for cmd_list synchronization. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: ipp: rename cmd_lock to lockYoungJun Cho
The ippdrv->cmd_list requires cmd_lock. So renames cmd_lock to lock for context. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
generated by cgit (git 2.34.1) at 2025-09-28 11:32:05 +0000