| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
firmware: tegra: Changes for v6.9-rc1
Contains a fix that makes sure we don't unnecessarily call kfree().
* tag 'tegra-for-6.9-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: bpmp: Return directly after a failed kzalloc() in get_filename()
Link: https://lore.kernel.org/r/20240223174849.1509465-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: Changes for v6.9-rc1
This set of changes adds ACPI support for the APBMISC driver and cleans
up a few things like dependencies and unused code.
* tag 'tegra-for-6.9-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Add SD wake event for Tegra234
soc/tegra: pmc: Update scratch as an optional aperture
soc/tegra: pmc: Update address mapping sequence for PMC apertures
bus: tegra-aconnect: Update dependency to ARCH_TEGRA
soc/tegra: Fix build failure on Tegra241
soc/tegra: fuse: Fix crash in tegra_fuse_readl()
soc/tegra: fuse: Define tegra194_soc_attr_group for Tegra241
soc/tegra: fuse: Add support for Tegra241
soc/tegra: fuse: Add ACPI support for Tegra194 and Tegra234
soc/tegra: fuse: Add function to print SKU info
soc/tegra: fuse: Add function to add lookups
soc/tegra: fuse: Add tegra_acpi_init_apbmisc()
soc/tegra: fuse: Refactor resource mapping
soc/tegra: fuse: Use dev_err_probe for probe failures
mm/util: Introduce kmemdup_array()
soc/tegra: pmc: Remove some old and deprecated functions and constants
Link: https://lore.kernel.org/r/20240223174849.1509465-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The linear ranges aren't really matching what they should be. Indeed,
the range is inclusive of the min value, so it makes sense the previous
range does NOT include the max step value representing the min value of
the range in question.
Since 3.4V is represented by the decimal value 232, the previous range
max step value should be 231 and not 232.
No expected change in behavior since 3.4V was mapped with step 232 from
the first range but is now mapped with step 232 from the second range.
While at it, remove the incorrect comment from the second range.
Fixes: f991a220a447 ("regulator: rk808: add rk806 support")
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://msgid.link/r/20240223-rk806-regulator-ranges-v1-2-3904ab70d250@theobroma-systems.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The linear ranges aren't really matching what they should be. Indeed,
the range is inclusive of the min value, so it makes sense the previous
range does NOT include the max step value representing the min value of
the range in question.
Since 1.5V is represented by the decimal value 160, the previous range
max step value should be 159 and not 160. Similarly, 3.4V is represented
by the decimal value 236, so the previous range max value should be 235
and not 237.
The only change in behavior this makes is that this actually modeled
the ranges to map step with decimal value 237 with 3.65V instead of
3.4V (the max supported by the HW).
Fixes: f991a220a447 ("regulator: rk808: add rk806 support")
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://msgid.link/r/20240223-rk806-regulator-ranges-v1-1-3904ab70d250@theobroma-systems.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.9
Quite a few changes to extend support to SCMI v3.2 specification,
to enhance notification handling and other miscellaneous updates.
1. Enhancements to notification handling
Until now, trying to register a notifier for an unsuppported
notification returned an error genrating unneeded message exchanges
with the SCMI platform. This can be avoided by looking up in advance
the specific protocol and resources available.
With these changes SCMI driver user will fail to register a notifier
if the related command or resource is not supported (like before)
without the need of exchanging any message.
Perf notifications are also extended to provide the pre-calculated
frequencies corresponding to the level or index carried by the
2. More SCMI v3.2 related updates
One of the main addition includes a centralized support to the SCMI
core to handle v3.2 optional protocol version negotiation, so that
at protocol initialization time, if the platform advertised version
is newer than supported by the kernel and protocol version negotiation
is supported, the SCMI core will attempt to negotiate an older protocol
version.
It also includes the clock get permissions which indicates if any of
the clock operations are forbidden by the platform for the OSPM agent.
It can be used in the clock driver to avoid unnecessary message
exchanges between the kernel and the platform which will always end
up with the failure. It also includes other missing bits of clock
v3.2 protocol so that the supported protocol version can be bumped
to 0x30000 (v3.2).
3. Miscellaneous updates
This includes addition of warning if the domain frequency multiplier
is 0 or rounded off to indicate the actual frequencies are either
wrong ot rounded off, hardening of clock domain info lookups, addition
of multiple protocols registration support within a SCMI driver,
update to SCMI entry in MAINTAINERS to include HWMON driver and
constifying the scmi_bus_type structure.
This also includes couple for fixes to minor issues: double free in
SMC transport cleanup path and struct kernel-doc warnings in optee
transport.
* tag 'scmi-updates-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (29 commits)
MAINTAINERS: Update SCMI entry with HWMON driver
firmware: arm_scmi: Update the supported clock protocol version
firmware: arm_scmi: Add standard clock OEM definitions
firmware: arm_scmi: Add clock check for extended config support
firmware: arm_scmi: Add support for v3.2 NEGOTIATE_PROTOCOL_VERSION
firmware: arm_scmi: Fix struct kernel-doc warnings in optee transport
firmware: arm_scmi: Report frequencies in the perf notifications
firmware: arm_scmi: Use opps_by_lvl to store opps
firmware: arm_scmi: Implement is_notify_supported callback in powercap protocol
firmware: arm_scmi: Implement is_notify_supported callback in reset protocol
firmware: arm_scmi: Implement is_notify_supported callback in sensor protocol
firmware: arm_scmi: Implement is_notify_supported callback in clock protocol
firmware: arm_scmi: Implement is_notify_supported callback in system power protocol
firmware: arm_scmi: Implement is_notify_supported callback in power protocol
firmware: arm_scmi: Implement is_notify_supported callback in perf protocol
firmware: arm_scmi: Add a common helper to check if a message is supported
firmware: arm_scmi: Check for notification support
firmware: arm_scmi: Make scmi_bus_type const
firmware: arm_scmi: Fix double free in SMC transport cleanup path
firmware: arm_scmi: Implement clock get permissions
...
Link: https://lore.kernel.org/r/20240223033435.118028-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm FF-A update for v6.9
Another single and simple update to just constify the ffa_bus_type
structure similar to other changes done treewide following the driver
core changes to accomodate the same.
* tag 'ffa-update-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Make ffa_bus_type const
Link: https://lore.kernel.org/r/20240223033250.117878-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
Fix kernel panic in OP-TEE driver
* tag 'optee-fix-for-v6.8' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: Fix kernel panic caused by incorrect error handling
Link: https://lore.kernel.org/r/20240304132727.GA3501807@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pass the link conf to the abort_channel_switch driver
method so the driver can handle things correctly.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228095718.27f621106ddd.Iadd3d69b722ffe5934779a32a0e4e596a4e33ed4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In MLO, we need the link id in the GTK key to be given by
the driver after rekeying in wowlan, so add that.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228094500.ce1bfc83a680.I43a6f8ab2804ee07116a37d5b9ec601b843464b1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
A few models require *.pnvm files while we don't declare them via
MODULE_FIRMWARE(). This resulted in the breakage of WiFi on the
system that relies on the information from modinfo (e.g. openSUSE
installer image).
This patch adds those missing MODULE_FIRMWARE() entries for *.pnvm
files.
type=feature
ticket=none
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1207553
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://msgid.link/20240228163837.4320-1-tiwai@suse.de
[move to appropriate files]
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If drm_kms_helper_poll=n the output poll work will only get scheduled
from drm_helper_probe_single_connector_modes() to handle a delayed
hotplug event. Since polling is disabled the work in this case should
just call drm_kms_helper_hotplug_event() w/o detecting the state of
connectors and rescheduling the work.
After commit d33a54e3991d after a delayed hotplug event above the
connectors did get re-detected in the poll work and the work got
re-scheduled periodically (since poll_running is also false if
drm_kms_helper_poll=n), in effect ignoring the drm_kms_helper_poll=n
kernel param.
Fix the above by calling only drm_kms_helper_hotplug_event() for a
delayed hotplug event if drm_kms_helper_hotplug_event=n, as was done
before d33a54e3991d.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: d33a54e3991d ("drm/probe_helper: sort out poll_running vs poll_enabled")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240301152243.1670573-1-imre.deak@intel.com
|
|
The IPA platform device is now only used as the structure containing
the IPA device structure. Replace the platform device pointer with
a pointer to the device structure.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rather than using the platform device pointer field in the IPA
pointer, pass a platform device pointer to ipa_smp2p_init(). Use
that pointer throughout that function.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rather than using the platform device pointer field in the IPA
pointer, pass a platform device pointer to ipa_smp2p_irq_init().
Use that pointer throughout that function (without assuming it's
the same as the IPA platform device pointer).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rather than using the platform device pointer field in the IPA
pointer, pass a platform device pointer to ipa_mem_init(). Use
that pointer throughout that function.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rather than using the platform device pointer field in the IPA
pointer, pass a platform device pointer to ipa_reg_init(). Use
that pointer throughout that function.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create a new function ipa_interrupt_init() that is called at probe
time to allocate and initialize the IPA interrupt data structure.
Create ipa_interrupt_exit() as its inverse.
This follows the normal IPA driver pattern of *_init() functions
doing things that can be done before access to hardware is required.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change the return type of ipa_interrupt_config() to be an error
code rather than an IPA interrupt structure pointer, and assign the
the pointer within that function.
Change ipa_interrupt_deconfig() to take the IPA pointer as argument
and have it invalidate the ipa->interrupt pointer.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Do not set rtnl_link_stats64 fields to zero, since they are zeroed
before ops->ndo_get_stats64 is called in core dev_get_stats() function.
Also, simplify the data collection by removing the temporary variable.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the nlmon driver and leverage the network
core allocation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The last patch which added support to extend the firmware shared
data to add channel data information has introduced a bug due to
the reserved space not adjusted accordingly.
This patch fixes the issue and also adds BUILD_BUG to avoid this
regression error.
Fixes: 997814491cee ("Octeontx2-af: Fetch MAC channel info from firmware")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
struct net_device poll_dev in struct igc_q_vector was added
in one of the initial commits, but never used.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To record the stats of header split packets, three stats are added in
the driver's ethtool stats.
- rx_hsplit_pkt is the split packets count with header split
- rx_hsplit_bytes is the received header bytes count with header split
- rx_hsplit_unsplit_pkt is the unsplit packet count due to header buffer
overflow or zero header length when header split is enabled
Currently, it's entering the stats_update critical section more than
once per packet. We have plans to avoid that in the future change to let
all the stats_update happen in one place at the end of
`gve_rx_poll_dqo`.
Co-developed-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add header buffers and ethtool support to enable header split via the
tcp-data-split flag in ethtool's ringparam config. A coherent dma memory
is allocated for the header buffers. There is one header buffer per ring
entry by calculating the offset to the header-buffers starting address.
The header buffer is always copied directly into the skb and payload is
always added as frags. When there is a header buffer overflow or the
header length is 0, the driver places the whole unsplit packet in frags.
When toggling header split, the driver will call gve_adjust_config to
set its queues appropriately. If header split is enabled by the user and
the max packet buffer size is no less than 4KB, driver will set the
packet buffer size as 4KB to support TCP_ZEROCOPY_RECEIVE. Otherwise the
driver will use the default 2KB as the packet buffer size.
`ethtool -G <dev> tcp-data-split on/off` is the command to toggle header
split.
`ethtool -g <dev>` will show the status of header split with the field
of `tcp-data-split`.
Co-developed-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To enable header split via ethtool, we first need to query the device to
get the max rx buffer size and header buffer size. Add a device option
to get these values and store them in the driver. If the header buffer
size received from the device is non-zero, it means header split is
supported in the device.
Currently the max rx buffer size will only be used when header split is
enabled which will set the data_buffer_size_dqo to be the max rx buffer
size. Also change the data_buffer_size_dqo from int to u16 since we are
modifying it and making it to be consistent with max_rx_buffer_size.
Co-developed-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot triggered a bug in geneve_rx() [1]
Issue is similar to the one I fixed in commit 8d975c15c0cd
("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()")
We have to save skb->network_header in a temporary variable
in order to be able to recompute the network_header pointer
after a pskb_inet_may_pull() call.
pskb_inet_may_pull() makes sure the needed headers are in skb->head.
[1]
BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline]
BUG: KMSAN: uninit-value in geneve_rx drivers/net/geneve.c:279 [inline]
BUG: KMSAN: uninit-value in geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391
IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline]
geneve_rx drivers/net/geneve.c:279 [inline]
geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391
udp_queue_rcv_one_skb+0x1d39/0x1f20 net/ipv4/udp.c:2108
udp_queue_rcv_skb+0x6ae/0x6e0 net/ipv4/udp.c:2186
udp_unicast_rcv_skb+0x184/0x4b0 net/ipv4/udp.c:2346
__udp4_lib_rcv+0x1c6b/0x3010 net/ipv4/udp.c:2422
udp_rcv+0x7d/0xa0 net/ipv4/udp.c:2604
ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:461 [inline]
ip_rcv_finish net/ipv4/ip_input.c:449 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core net/core/dev.c:5534 [inline]
__netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648
process_backlog+0x480/0x8b0 net/core/dev.c:5976
__napi_poll+0xe3/0x980 net/core/dev.c:6576
napi_poll net/core/dev.c:6645 [inline]
net_rx_action+0x8b8/0x1870 net/core/dev.c:6778
__do_softirq+0x1b7/0x7c5 kernel/softirq.c:553
do_softirq+0x9a/0xf0 kernel/softirq.c:454
__local_bh_enable_ip+0x9b/0xa0 kernel/softirq.c:381
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:820 [inline]
__dev_queue_xmit+0x2768/0x51c0 net/core/dev.c:4378
dev_queue_xmit include/linux/netdevice.h:3171 [inline]
packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
__sys_sendto+0x735/0xa10 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3819 [inline]
slab_alloc_node mm/slub.c:3860 [inline]
kmem_cache_alloc_node+0x5cb/0xbc0 mm/slub.c:3903
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
__alloc_skb+0x352/0x790 net/core/skbuff.c:651
alloc_skb include/linux/skbuff.h:1296 [inline]
alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6394
sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2783
packet_alloc_skb net/packet/af_packet.c:2930 [inline]
packet_snd net/packet/af_packet.c:3024 [inline]
packet_sendmsg+0x70c2/0x9f10 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
__sys_sendto+0x735/0xa10 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Fixes: 2d07dc79fe04 ("geneve: add initial netdev driver for GENEVE tunnels")
Reported-and-tested-by: syzbot+6a1423ff3f97159aae64@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MODULE_AUTHOR macro is supposed to be a person
not a company.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clean up complaints from an xmastree.py scan.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the kernel's CQE dim table to align better with the
driver's use of completion queues, and use the tx moderation
when using Tx interrupts.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
An earlier change moved the hwstamp queue check into a helper
function with an unlikely(). However, it makes more sense for
the caller to decide if it's likely() or unlikely(), so make
the change to support that.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To help make sure we're only accessing things we really need
to access we can cut down on the q->lif->netdev references by
using q->dev which is already in cache.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of using q->lif->netdev, just pass the netdev when it's
locally defined.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If there is a lot of transmit traffic the driver can get into a
situation that the device is starved due to the doorbell never
being rung. This can happen if xmit_more is set constantly
and __netdev_tx_sent_queue() keeps returning false. Fix this
by checking if the queue needs to be stopped right before
calling __netdev_tx_sent_queue(). Use MAX_SKB_FRAGS + 1 as the
stop condition because that's the maximum number of frags
supported for non-TSO transmit.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver currently calls netdev_tx_completed_queue() for every
Tx completion. However, this API is only meant to be called once
per NAPI if any Tx work is done. Make the necessary changes to
support calling netdev_tx_completed_queue() only once per NAPI.
Also, use the __netdev_tx_sent_queue() API, which supports the
xmit_more functionality.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of napi_consume_skb so that skb recycling
can happen by way of the napi_skb_cache.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Perf was showing some hot spots in ionic_tx_descs_needed()
for TSO traffic. Rework the function to return sooner where
possible.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cut down the number of default Tx and Rx descriptors to save
initial memory requirements.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the driver attempts to wake the Tx queue
for every descriptor processed. However, this is
overkill and can cause thrashing since Tx xmit can be
running concurrently on a different CPU than Tx clean.
Fix this by refactoring Tx cq servicing into its own
function so the Tx wake code can run after processing
all Tx descriptors.
The driver isn't using the expected memory barriers
to make sure the stop/start bits are coherent. Fix
this by making sure to use the correct memory barriers.
Also, the driver is using the wake API during Tx
xmit even though it's already scheduled. Fix this by
using the start API during Tx xmit.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 3e2f544dd8a33 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.
Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the bareudp driver and leverage the network
core allocation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The error path while failing to register devices on the TEE bus has a
bug leading to kernel panic as follows:
[ 15.398930] Unable to handle kernel paging request at virtual address ffff07ed00626d7c
[ 15.406913] Mem abort info:
[ 15.409722] ESR = 0x0000000096000005
[ 15.413490] EC = 0x25: DABT (current EL), IL = 32 bits
[ 15.418814] SET = 0, FnV = 0
[ 15.421878] EA = 0, S1PTW = 0
[ 15.425031] FSC = 0x05: level 1 translation fault
[ 15.429922] Data abort info:
[ 15.432813] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 15.438310] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 15.443372] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 15.448697] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000d9e3e000
[ 15.455413] [ffff07ed00626d7c] pgd=1800000bffdf9003, p4d=1800000bffdf9003, pud=0000000000000000
[ 15.464146] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
Commit 7269cba53d90 ("tee: optee: Fix supplicant based device enumeration")
lead to the introduction of this bug. So fix it appropriately.
Reported-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218542
Fixes: 7269cba53d90 ("tee: optee: Fix supplicant based device enumeration")
Cc: stable@vger.kernel.org
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
(skb_transport_header(skb) - skb_network_header(skb))
can be replaced by skb_network_header_len(skb)
Add a DEBUG_NET_WARN_ON_ONCE() in skb_network_header_len()
to catch cases were the transport_header was not set.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a cleanup patch, making code a bit more concise.
1) Use skb_network_offset(skb) in place of
(skb_network_header(skb) - skb->data)
2) Use -skb_network_offset(skb) in place of
(skb->data - skb_network_header(skb))
3) Use skb_transport_offset(skb) in place of
(skb_transport_header(skb) - skb->data)
4) Use skb_inner_transport_offset(skb) in place of
(skb_inner_transport_header(skb) - skb->data)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com> # for sfc
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
instead of open coding it
Since 3f9c26210cf8 ("can: error: add definitions for the different CAN
error thresholds") we have proper defines for the various CAN error
thresholds. So make use of it and replace 256 by
CAN_BUS_OFF_THRESHOLD.
Link: https://lore.kernel.org/all/20240304074503.3584662-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The structure gs_device_mode dm::mode is a __le32, use cpu_to_le32()
to assign GS_CAN_MODE_RESET.
As GS_CAN_MODE_RESET is 0x0, this is basically a no-op.
Link: https://lore.kernel.org/all/20240304074540.3584842-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM32 DeviceTree changes for v6.9
Support for the Samsung Galaxy Tab 4 10.1 LTE is added.
On MSM8226 CPU, SAW and ACC nodes are introduced to enable SMP support.
Watchdog definition is also added, and all nodes are sorted and cleaned
up.
rmtfs memory is defined on HTC One Mini 2, vibrator support is addedto
LG G Watch R, touch keycodes are defined for Samsung Galaxy Tab 4.
The Samsung Galaxy Tab 4 DeviceTree is refactored to allow more variants
to be introduced easily.
The SAW nodes across APQ8064, IPQ8064, MSM8960 and MSM8974 are updated
based on recent work on the binding and driver.
On IPQ8064 SAW nodes are cleaned up, and unused reset-names is dropped
from DWC3.
On MSM8960 GSBI3 and the I2C bus therein is introduced, in order to
introduce touchscreen support on the Samsung Galaxy Express SGH-I437.
gpio-keys are introduced on the same.
On MSM8974 the QFPROM register size is corrected. The order of the
clocks in the SDX65 DWC3 node is corrected to match the binding.
For a variety of platforms interrupt-related constants are replaced
with defined.
The mach-qcom Kconfig options are cleaned up, to avoid unnecessary
per-platform options.
* tag 'qcom-arm32-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (40 commits)
ARM: dts: qcom: samsung-matisse-common: Add UART
ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 10.1 LTE (SM-T535)
ARM: dts: qcom: samsung-matisse-common: Add initial common device tree
ARM: dts: qcom: ipq8064: drop 'regulator' property from SAW2 devices
ARM: dts: qcom: ipq4019: drop 'regulator' property from SAW2 devices
ARM: dts: qcom: msm8974: drop 'regulator' property from SAW2 device
ARM: dts: qcom: apq8084: drop 'regulator' property from SAW2 device
ARM: dts: qcom: msm8960: declare SAW2 regulators
ARM: dts: qcom: apq8064: declare SAW2 regulators
ARM: dts: qcom: ipq8064: rename SAW nodes to power-manager
ARM: dts: qcom: ipq4019: rename SAW nodes to power-manager
ARM: dts: qcom: msm8974: rename SAW nodes to power-manager
ARM: dts: qcom: msm8960: rename SAW nodes to power-manager
ARM: dts: qcom: apq8084: rename SAW nodes to power-manager
ARM: dts: qcom: apq8064: rename SAW nodes to power-manager
ARM: dts: qcom: ipq8064: use SoC-specific compatibles for SAW2 devices
ARM: dts: qcom: ipq4019: use SoC-specific compatibles for SAW2 devices
ARM: dts: qcom: msm8960: use SoC-specific compatibles for SAW2 devices
ARM: dts: qcom: msm8974: use new compat string for L2 SAW2 unit
ARM: dts: qcom: apq8084: use new compat string for L2 SAW2 unit
...
Link: https://lore.kernel.org/r/20240304033507.89751-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add support for new Kvaser pciefd device, PCIe 8xCAN, based on Xilinx FPGA.
Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/2b2c720a788e1904283e354abb320adb5b631d26.camel@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add support for Kvaser Leaf v3, based on the hydra platform.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20240223095217.43783-1-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
Initial support for the rk3568 Qnap TS433 NAS, the rk3588-based Tiger SoM
from Theobroma-Systems and the rk3588-based Toybrick TB-RK3588X.
Some fixes to conform to dt-bindings for i2s (rk3588, rk356x) and
rk356x video-decoder (missing interrupt-names).
Correcting the vendor in the compatible for OrangePi RK3399 and BananaPi
R2 Pro (discussed with DT-maintainers beforehand of course).
The VO1-GRF syscon needs its clock to work, and that clock also needed to
be actually exported forst, so we're sharing a branch with the Rockchip
clock-tree (that already got merged into the main clock-tree for 6.9) for
this small shared code.
And as another step on the long road to graphics output on rk3588, 6.9 will
get the hdmi-phy via the phy-tree, so here the dts node is added.
* tag 'v6.9-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433
arm64: dts: rockchip: Add basic support for QNAP TS-433
dt-bindings: arm: rockchip: Add QNAP TS-433
arm64: dts: rockchip: add Haikou baseboard with RK3588-Q7 SoM
arm64: dts: rockchip: add RK3588-Q7 (Tiger) SoM
dt-bindings: arm: rockchip: Add Theobroma-Systems RK3588 Q7 with baseboard
arm64: dts: rockchip: drop rockchip,trcm-sync-tx-only from rk3588 i2s
arm64: dts: rockchip: fix reset-names for rk356x i2s2 controller
arm64: dts: rockchip: add missing interrupt-names for rk356x vdpu
arm64: dts: rockchip: add clock to vo1-grf syscon on rk3588
dt-bindings: arm: rockchip: Add Toybrick TB-RK3588X
arm64: dts: rockchip: Add devicetree support for TB-RK3588X board
arm64: dts: rockchip: adjust vendor on orangepi rk3399 board
arm64: dts: rockchip: adjust vendor on Banana Pi R2 Pro board
dt-bindings: arm: rockchip: Correct vendor for Banana Pi R2 Pro
dt-bindings: arm: rockchip: Correct vendor for Orange Pi RK3399 board
arm64: dts: rockchip: Add HDMI0 PHY to rk3588
dt-bindings: clock: rk3588: add missing PCLK_VO1GRF
dt-bindings: clock: rk3588: drop CLK_NR_CLKS
clk: rockchip: rk3588: fix CLK_NR_CLKS usage
Link: https://lore.kernel.org/r/3695004.ElGaqSPkdT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
suspend/resume
When not configured for wakeup lis3lv02d_i2c_suspend() will call
lis3lv02d_poweroff() even if the device has already been turned off
by the runtime-suspend handler and if configured for wakeup and
the device is runtime-suspended at this point then it is not turned
back on to serve as a wakeup source.
Before commit b1b9f7a49440 ("misc: lis3lv02d_i2c: Add missing setting
of the reg_ctrl callback"), lis3lv02d_poweroff() failed to disable
the regulators which as a side effect made calling poweroff() twice ok.
Now that poweroff() correctly disables the regulators, doing this twice
triggers a WARN() in the regulator core:
unbalanced disables for regulator-dummy
WARNING: CPU: 1 PID: 92 at drivers/regulator/core.c:2999 _regulator_disable
...
Fix lis3lv02d_i2c_suspend() to not call poweroff() a second time if
already runtime-suspended and add a poweron() call when necessary to
make wakeup work.
lis3lv02d_i2c_resume() has similar issues, with an added weirness that
it always powers on the device if it is runtime suspended, after which
the first runtime-resume will call poweron() again, causing the enabled
count for the regulator to increase by 1 every suspend/resume. These
unbalanced regulator_enable() calls cause the regulator to never
be turned off and trigger the following WARN() on driver unbind:
WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put
Fix this by making lis3lv02d_i2c_resume() mirror the new suspend().
Fixes: b1b9f7a49440 ("misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/regressions/5fc6da74-af0a-4aac-b4d5-a000b39a63a5@molgen.mpg.de/
Cc: stable@vger.kernel.org
Cc: regressions@lists.linux.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 15 7590
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20240220190035.53402-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
