summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-06-17[media] v4l: vsp1: Don't handle clocks manuallyLaurent Pinchart
The power domain performs functional clock handling when using runtime PM, there's no need to enable and disable the clock manually. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-17[media] v4l: vsp1: Implement runtime PM supportLaurent Pinchart
Replace the manual refcount and clock management code by runtime PM. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-17[media] v4l: Add Renesas R-Car FCP driverLaurent Pinchart
The FCP is a companion module of video processing modules in the Renesas R-Car Gen3 SoCs. It provides data compression and decompression, data caching, and conversion of AXI transactions in order to reduce the memory bandwidth. The driver is not meant to be used standalone but provides an API to the video processing modules to control the FCP. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-17regulator: anatop: allow regulator to be in bypass modeMika Båtsman
Bypass support was added in commit d38018f2019c ("regulator: anatop: Add bypass support to digital LDOs"). A check for valid voltage selectors was added in commit da0607c8df5c ("regulator: anatop: Fail on invalid voltage selector") but it also discards all regulators that are in bypass mode. Add check for the bypass setting. Errors below were seen on a Variscite mx6 board. anatop_regulator 20c8000.anatop:regulator-vddcore@140: Failed to read a valid default voltage selector. anatop_regulator: probe of 20c8000.anatop:regulator-vddcore@140 failed with error -22 anatop_regulator 20c8000.anatop:regulator-vddsoc@140: Failed to read a valid default voltage selector. anatop_regulator: probe of 20c8000.anatop:regulator-vddsoc@140 failed with error -22 Fixes: da0607c8df5c ("regulator: anatop: Fail on invalid voltage selector") Signed-off-by: Mika Båtsman <mbatsman@mvista.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-17iommu/vt-d: Enable QI on all IOMMUs before setting root entryJoerg Roedel
This seems to be required on some X58 chipsets on systems with more than one IOMMU. QI does not work until it is enabled on all IOMMUs in the system. Reported-by: Dheeraj CVR <cvr.dheeraj@gmail.com> Tested-by: Dheeraj CVR <cvr.dheeraj@gmail.com> Fixes: 5f0a7f7614a9 ('iommu/vt-d: Make root entry visible for hardware right after allocation') Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-06-16nfp: use correct index to mask link state irqJakub Kicinski
We were using an incorrect define to get the irq vector number. NFP_NET_CFG_LSC is a control BAR offset, LSC interrupt vector index is called NFP_NET_IRQ_LSC_IDX. For machines with less than 30 CPUs this meant that we were disabling/enabling IRQ 0. For bigger hosts we were just playing with the 31st RX/TX interrupt. Fixes: 0ba40af963f0 ("nfp: move link state interrupt request/free calls") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-16Merge tag 'pwm/for-4.7-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm fixes from Thierry Reding: "These changes fix a bit of fallout from the introduction of the atomic API" * tag 'pwm/for-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: atmel-hlcdc: Fix default PWM polarity pwm: sysfs: Get return value from pwm_apply_state() pwm: Improve args checking in pwm_apply_state()
2016-06-16mlx4e: Do not attempt to offload VXLAN ports that are unrecognizedAlexander Duyck
The mlx4e driver does not support more than one port for VXLAN offload. As such expecting the hardware to offload other ports is invalid since it appears the parsing logic is used to perform Tx checksum and segmentation offloads. Use the vxlan_port number to determine in which cases we can apply the offload and in which cases we can not. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-16net: sfc: avoid -Wtype-limits warningArnd Bergmann
When building with -Wextra, we get a harmless warning from the EFX_EXTRACT_OWORD32 macro: ethernet/sfc/farch.c: In function 'efx_farch_test_registers': ethernet/sfc/farch.c:119:30: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits] ethernet/sfc/farch.c:124:144: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits] ethernet/sfc/farch.c:124:392: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits] ethernet/sfc/farch.c:124:731: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits] The macro and the caller are both correct, but we can avoid the warning by changing the index variable to a signed type. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-16Merge ath-current from ath.gitKalle Valo
ath.git fixes for 4.7. Major changes: ath9k * fix GPIO mask regression with AR9462 and AR9565 ath10k * fix deadlock while processing rx_in_ord_ind * fix crash related to printing firmware features in debug mode * fix deadlock when peer cannot be created
2016-06-16rtl8xxxu: fix typo on variable name, compare against correct variableColin Ian King
path_b_ok is being assigned but immediately after path_a_ok is being compared to the value 0x03. This appears to be a typo on the variable name, compare path_b_ok instead. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-06-16power_supply: tps65217-charger: Fix NULL deref during property exportMarcin Niestroj
This bug leads to: [ 1.906411] Unable to handle kernel NULL pointer dereference at virtual address 0000000c [ 1.914878] pgd = c0004000 [ 1.917786] [0000000c] *pgd=00000000 [ 1.921536] Internal error: Oops: 5 [#1] SMP ARM [ 1.926357] Modules linked in: [ 1.929556] CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 4.4.5 #18 [ 1.936006] Hardware name: Generic AM33XX (Flattened Device Tree) [ 1.942383] Workqueue: events power_supply_changed_work [ 1.947842] task: de2c41c0 ti: de2c8000 task.ti: de2c8000 [ 1.953483] PC is at tps65217_ac_get_property+0x14/0x28 [ 1.958937] LR is at tps65217_ac_get_property+0x10/0x28 Driver was trying to use drv_data in property get handler. However drv_data was not set, so it caused NULL pointer dereference. This patch properly sets drv_data during probe by power_supply_config parameter, so the property get handler works as desired. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Fixes: 3636859b280c ("power_supply: Add support for tps65217-charger") Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-06-16PM / OPP: Add 'UNKNOWN' status for shared_opp in struct opp_tableViresh Kumar
dev_pm_opp_get_sharing_cpus() returns 0 even in the case when the OPP core doesn't know whether or not the table is shared. It works on the majority of platforms, where the OPP table is never created before invoking the function and then -ENODEV is returned by it. But in the case of one platform (Jetson TK1) at least, the situation is a bit different. The OPP table has been created (somehow) before dev_pm_opp_get_sharing_cpus() is called and it returns 0. Its caller treats that as 'the CPUs don't share OPPs' and that leads to degraded performance. Fix this by converting 'shared_opp' in struct opp_table to an enum and making dev_pm_opp_get_sharing_cpus() return -EINVAL in case when the value of that field is "access unknown", so that the caller can handle it accordingly (cpufreq-dt considers that as 'all CPUs share the table', for example). Fixes: 6f707daa3833 "PM / OPP: Add dev_pm_opp_get_sharing_cpus()" Reported-and-tested-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw : Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-16[media] rcar-vin: get rid of an unused varMauro Carvalho Chehab
drivers/media/platform/rcar-vin/rcar-core.c: In function 'rvin_graph_notify_complete': drivers/media/platform/rcar-vin/rcar-core.c:65:22: warning: variable 'sd' set but not used [-Wunused-but-set-variable] struct v4l2_subdev *sd; ^ Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-16[media] rcar-vin: add Renesas R-Car VIN driverNiklas Söderlund
A V4L2 driver for Renesas R-Car VIN driver that do not depend on soc_camera. The driver is heavily based on its predecessor and aims to replace it. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-16[media] videobuf2-v4l2: Verify planes array in buffer dequeueingSakari Ailus
When a buffer is being dequeued using VIDIOC_DQBUF IOCTL, the exact buffer which will be dequeued is not known until the buffer has been removed from the queue. The number of planes is specific to a buffer, not to the queue. This does lead to the situation where multi-plane buffers may be requested and queued with n planes, but VIDIOC_DQBUF IOCTL may be passed an argument struct with fewer planes. __fill_v4l2_buffer() however uses the number of planes from the dequeued videobuf2 buffer, overwriting kernel memory (the m.planes array allocated in video_usercopy() in v4l2-ioctl.c) if the user provided fewer planes than the dequeued buffer had. Oops! Fixes: b0e0e1f83de3 ("[media] media: videobuf2: Prepare to divide videobuf2") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org # for v4.4 and later Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-16[media] vb2: core: Skip planes array verification if pb is NULLSakari Ailus
An earlier patch fixing an input validation issue introduced another issue: vb2_core_dqbuf() is called with pb argument value NULL in some cases, causing a NULL pointer dereference. Fix this by skipping the verification as there's nothing to verify. Fixes: e7e0c3e26587 ("[media] videobuf2-core: Check user space planes array in dqbuf") Signed-off-by: David R <david@unsolicited.net> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org # for v4.4 and later Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-16memory: omap-gpmc: Fix omap gpmc EXTRADELAY timingOcquidant, Sebastien
In the omap gpmc driver it can be noticed that GPMC_CONFIG4_OEEXTRADELAY is overwritten by the WEEXTRADELAY value from the device tree and GPMC_CONFIG4_WEEXTRADELAY is not updated by the value from the device tree. As a consequence, the memory accesses cannot be configured properly when the extra delay are needed for OE and WE. Fix the update of GPMC_CONFIG4_WEEXTRADELAY with the value from the device tree file and prevents GPMC_CONFIG4_OEXTRADELAY being overwritten by the WEXTRADELAY value from the device tree. Cc: stable@vger.kernel.org Signed-off-by: Ocquidant, Sebastien <sebastienocquidant@eaton.com> Signed-off-by: Roger Quadros <rogerq@ti.com>
2016-06-16coresight: Handle build path errorSuzuki K Poulose
Enabling a component via sysfs (echo 1 > enable_source), would trigger building a path from the enabled sources to the sink. If there is an error in the process (e.g, sink not enabled or the device (CPU corresponding to ETM) is not online), we never report failure, except for leaving a message in the dmesg. Do proper error checking for the build path and return the error. Before: $ echo 0 > /sys/devices/system/cpu/cpu2/online $ echo 1 > /sys/devices/cs_etm/cpu2/enable_source $ echo $? 0 After: $ echo 0 > /sys/devices/system/cpu/cpu2/online $ echo 1 > /sys/devices/cs_etm/cpu2/enable_source -bash: echo: write error: No such device or address Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-16coresight: Fix erroneous memset in tmc_read_unprepare_etrSuzuki K Poulose
At the end of a trace collection, we try to clear the entire buffer and enable the ETR back if it was already enabled. But, we would have adjusted the drvdata->buf to point to the beginning of the trace data in the trace buffer @drvdata->vaddr. So, the following code which clears the buffer is dangerous and can cause crashes, like below : memset(drvdata->buf, 0, drvdata->size); Unable to handle kernel paging request at virtual address ffffff800a145000 pgd = ffffffc974726000 *pgd=00000009f3e91003, *pud=00000009f3e91003, *pmd=0000000000000000 PREEMPT SMP Modules linked in: CPU: 4 PID: 1692 Comm: dd Not tainted 4.7.0-rc2+ #1721 Hardware name: ARM Juno development board (r0) (DT) task: ffffffc9734a0080 ti: ffffffc974460000 task.ti: ffffffc974460000 PC is at __memset+0x1ac/0x200 LR is at tmc_read_unprepare_etr+0x144/0x1bc pc : [<ffffff80083a05ac>] lr : [<ffffff800859c984>] pstate: 200001c5 ... [<ffffff80083a05ac>] __memset+0x1ac/0x200 [<ffffff800859b2e4>] tmc_release+0x90/0x94 [<ffffff8008202f58>] __fput+0xa8/0x1ec [<ffffff80082030f4>] ____fput+0xc/0x14 [<ffffff80080c3ef8>] task_work_run+0xb0/0xe4 [<ffffff8008088bf4>] do_notify_resume+0x64/0x6c [<ffffff8008084d5c>] work_pending+0x10/0x14 Code: 91010108 54ffff4a 8b040108 cb050042 (d50b7428) Since we clear the buffer anyway in the following call to tmc_etr_enable_hw(), remove the erroneous memset(). Fixes: commit de5461970b3e9e1 ("coresight: tmc: allocating memory when needed") Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-16coresight: Fix tmc_read_unprepare_etrSuzuki K Poulose
At the end of the trace capture, we free the allocated memory, resetting the drvdata->buf to NULL, to indicate that trace data was collected and the next trace session should allocate the memory in tmc_enable_etr_sink_sysfs. The tmc_enable_etr_sink_sysfs, we only allocate memory if drvdata->vaddr is not NULL (which is not performed at the end of previous session). This can cause, drvdata->vaddr getting assigned NULL and later we do memset() which causes a crash as below : Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ffffffc9747f0000 [00000000] *pgd=00000009f402e003, *pud=00000009f402e003, *pmd=0000000000000000 Internal error: Oops: 96000046 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1592 Comm: bash Not tainted 4.7.0-rc1+ #1712 Hardware name: ARM Juno development board (r0) (DT) task: ffffffc078fe0080 ti: ffffffc974178000 task.ti: ffffffc974178000 PC is at __memset+0x1ac/0x200 LR is at tmc_enable_etr_sink+0xf8/0x304 pc : [<ffffff80083a002c>] lr : [<ffffff800859be44>] pstate: 400001c5 sp : ffffffc97417bc00 x29: ffffffc97417bc00 x28: ffffffc974178000 Call trace: Exception stack(0xffffffc97417ba40 to 0xffffffc97417bb60) ba40: 0000000000000001 ffffffc974a5d098 ffffffc97417bc00 ffffff80083a002c ba60: ffffffc974a5d118 0000000000000000 0000000000000000 0000000000000000 ba80: 0000000000000001 0000000000000000 ffffff800859bdec 0000000000000040 baa0: ffffff8008b45b58 00000000000001c0 ffffffc97417baf0 ffffff80080eddb4 bac0: 0000000000000003 ffffffc078fe0080 ffffffc078fe0960 ffffffc078fe0940 bae0: 0000000000000000 0000000000000000 00000000007fffc0 0000000000000004 bb00: 0000000000000000 0000000000000040 000000000000003f 0000000000000000 bb20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001 bb40: ffffffc078fe0960 0000000000000018 ffffffffffffffff 0008669628000000 [<ffffff80083a002c>] __memset+0x1ac/0x200 [<ffffff8008599814>] coresight_enable_path+0xa8/0x1dc [<ffffff8008599b10>] coresight_enable+0x88/0x1b8 [<ffffff8008599d88>] enable_source_store+0x3c/0x6c [<ffffff800845eaf4>] dev_attr_store+0x18/0x28 [<ffffff80082829e8>] sysfs_kf_write+0x54/0x64 [<ffffff8008281c30>] kernfs_fop_write+0x148/0x1d8 [<ffffff8008200128>] __vfs_write+0x28/0x110 [<ffffff8008200e88>] vfs_write+0xa0/0x198 [<ffffff80082021b0>] SyS_write+0x44/0xa0 [<ffffff8008084e70>] el0_svc_naked+0x24/0x28 Code: 91010108 54ffff4a 8b040108 cb050042 (d50b7428) This patch fixes the issue by clearing the drvdata->vaddr while we free the allocated buffer at the end of a session, so that we allocate the memory again. Cc: mathieu.poirier@linaro.org Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-16coresight: Fix NULL pointer dereference in _coresight_build_pathSuzuki K Poulose
_coresight_build_path assumes that all the connections of a csdev has the child_dev initialised. This may not be true if the particular component is not supported by the kernel config(e.g TPIU) but is present in the DT. In which case, building a path can cause a crash like this : Unable to handle kernel NULL pointer dereference at virtual address 00000010 pgd = ffffffc9750dd000 [00000010] *pgd=00000009f5e90003, *pud=00000009f5e90003, *pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP Modules linked in: CPU: 4 PID: 1348 Comm: bash Not tainted 4.6.0-next-20160517 #1646 Hardware name: ARM Juno development board (r0) (DT) task: ffffffc97517a280 ti: ffffffc9762c4000 task.ti: ffffffc9762c4000 PC is at _coresight_build_path+0x18/0xe4 LR is at _coresight_build_path+0xc0/0xe4 pc : [<ffffff80083d5130>] lr : [<ffffff80083d51d8>] pstate: 20000145 sp : ffffffc9762c7ba0 [<ffffff80083d5130>] _coresight_build_path+0x18/0xe4 [<ffffff80083d51d8>] _coresight_build_path+0xc0/0xe4 [<ffffff80083d51d8>] _coresight_build_path+0xc0/0xe4 [<ffffff80083d51d8>] _coresight_build_path+0xc0/0xe4 [<ffffff80083d51d8>] _coresight_build_path+0xc0/0xe4 [<ffffff80083d51d8>] _coresight_build_path+0xc0/0xe4 [<ffffff80083d5cdc>] coresight_build_path+0x40/0x68 [<ffffff80083d5e14>] coresight_enable+0x74/0x1bc [<ffffff80083d60a0>] enable_source_store+0x3c/0x6c [<ffffff800830b17c>] dev_attr_store+0x18/0x28 [<ffffff80081ca9c4>] sysfs_kf_write+0x40/0x50 [<ffffff80081c9e38>] kernfs_fop_write+0x140/0x1cc [<ffffff8008163ec8>] __vfs_write+0x28/0x110 [<ffffff8008164bf0>] vfs_write+0xa0/0x174 [<ffffff8008165d18>] SyS_write+0x44/0xa0 [<ffffff8008084e70>] el0_svc_naked+0x24/0x28 Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-16Merge tag 'extcon-fixes-for-4.7-rc4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-linus Chanwoo writes: Update extcon for v4.7-rc4 This patch fixes the following issue: - In the extcon-palmas.c, fix the state of VBUS when using GPIO detection. If probe funticon don't check the state during probe, the extcon client driver cannot get the state of VBUS gpio until the user detach the connector and attach the connector again.
2016-06-15r8152: correct the rx early sizehayeswang
The rx early size should be (agg_buf_sz - packet size) / 8 Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15r8152: reset the bmuhayeswang
Reset the BMU to clear the rx/tx fifo. This avoids that the unexpected data remains in the hw. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15r8152: disable MAC clock speed downhayeswang
Disable MAC clock speed down. It may casue the first control transfer to contain the wrong data, when the power state change from U1 to U0. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15Merge tag 'drm-fixes-for-v4.7-rc4' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "The main drm fixes pull for rc4: one regression fix in the connector refcounting, and an MST fix. There rest is nouveau, amdkfd, i915, etnaviv, and radeon/amdgpu fixes, mostly regression or black screen fixes" * tag 'drm-fixes-for-v4.7-rc4' of git://people.freedesktop.org/~airlied/linux: (23 commits) drm/etnaviv: initialize iommu domain page size drm/nouveau/iccsense: fix memory leak drm/nouveau/Revert "drm/nouveau/device/pci: set as non-CPU-coherent on ARM64" drm/amd/powerplay: select samu dpm 0 as boot level on polaris. drm/amd/powerplay: update powerplay table parsing drm/dp/mst: Always clear proposed vcpi table for port. drm/crtc: only store the necessary data for set_config rollback drm/crtc: fix connector reference counting mismatch in drm_crtc_helper_set_config drm/i915/ilk: Don't disable SSC source if it's in use Revert "drm/amdgpu: add pipeline sync while vmid switch in same ctx" drm/amdgpu/gfx7: fix broken condition check drm/radeon: fix asic initialization for virtualized environments amdgpu: fix asic initialization for virtualized environments (v2) drm/radeon: don't use fractional dividers on RS[78]80 if SS is enabled drm/radeon: do not hard reset GPU while freezing on r600/r700 family drm/i915: Extract physical display dimensions from VBT drm/i915: Check VBT for port presence in addition to the strap on VLV/CHV drm/i915: Only ignore eDP ports that are connected drm/i915: Silence "unexpected child device config size" for VBT on 845g drm/i915: Fix NULL pointer deference when out of PLLs in IVB ...
2016-06-15Merge tag 'platform-drivers-x86-v4.7-2' of ↵Linus Torvalds
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver fixes from Darren Hart: "Minor kconfig dependency cleanup, trivial mic mute hotkey for ideapad, and a needed improvement in adaptive keyboard detection for thinkpad: platform/x86: - Drop duplicate dependencies on X86 thinkpad_acpi: - Add support for HKEY version 0x200 ideapad_laptop: - Add an event for mic mute hotkey" * tag 'platform-drivers-x86-v4.7-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: platform/x86: Drop duplicate dependencies on X86 thinkpad_acpi: Add support for HKEY version 0x200 ideapad_laptop: Add an event for mic mute hotkey
2016-06-15net: skfb: remove obsolete -I cflagArnd Bergmann
The skfp driver has been moved to drivers/net/fddi/skfp a long time ago, but we still attempt to include headers from the old location, which causes a warning when building with W=1: cc1: error: /git/arm-soc/drivers/net/skfp: No such file or directory [-Werror=missing-include-dirs] cc1: error: drivers/net/skfp: No such file or directory [-Werror=missing-include-dirs] Clearly this include directive is not needed any more, so we can just remove it now. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15Merge tag 'upstream-4.7-rc4' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBI fixes from Richard Weinberger: "This contains fixes for a regression introduced in rc1" * tag 'upstream-4.7-rc4' of git://git.infradead.org/linux-ubifs: ubi: Don't bypass ->getattr() Revert "mtd: switch open_mtd_by_chdev() to use of vfs_stat()" Revert "mtd: switch ubi_open_volume_path() to vfs_stat()"
2016-06-15base: make module_create_drivers_dir race-freeJiri Slaby
Modules which register drivers via standard path (driver_register) in parallel can cause a warning: WARNING: CPU: 2 PID: 3492 at ../fs/sysfs/dir.c:31 sysfs_warn_dup+0x62/0x80 sysfs: cannot create duplicate filename '/module/saa7146/drivers' Modules linked in: hexium_gemini(+) mxb(+) ... ... Call Trace: ... [<ffffffff812e63a2>] sysfs_warn_dup+0x62/0x80 [<ffffffff812e6487>] sysfs_create_dir_ns+0x77/0x90 [<ffffffff8140f2c4>] kobject_add_internal+0xb4/0x340 [<ffffffff8140f5b8>] kobject_add+0x68/0xb0 [<ffffffff8140f631>] kobject_create_and_add+0x31/0x70 [<ffffffff8157a703>] module_add_driver+0xc3/0xd0 [<ffffffff8155e5d4>] bus_add_driver+0x154/0x280 [<ffffffff815604c0>] driver_register+0x60/0xe0 [<ffffffff8145bed0>] __pci_register_driver+0x60/0x70 [<ffffffffa0273e14>] saa7146_register_extension+0x64/0x90 [saa7146] [<ffffffffa0033011>] hexium_init_module+0x11/0x1000 [hexium_gemini] ... As can be (mostly) seen, driver_register causes this call sequence: -> bus_add_driver -> module_add_driver -> module_create_drivers_dir The last one creates "drivers" directory in /sys/module/<...>. When this is done in parallel, the directory is attempted to be created twice at the same time. This can be easily reproduced by loading mxb and hexium_gemini in parallel: while :; do modprobe mxb & modprobe hexium_gemini wait rmmod mxb hexium_gemini saa7146_vv saa7146 done saa7146 calls pci_register_driver for both mxb and hexium_gemini, which means /sys/module/saa7146/drivers is to be created for both of them. Fix this by a new mutex in module_create_drivers_dir which makes the test-and-create "drivers" dir atomic. I inverted the condition and removed 'return' to avoid multiple unlocks or a goto. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Fixes: fe480a2675ed (Modules: only add drivers/ direcory if needed) Cc: v2.6.21+ <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-15Merge tag 'for-linus-4.7-2' of git://git.code.sf.net/p/openipmi/linux-ipmiLinus Torvalds
Pull ipmi bugfix from Corey Minyard: "Fix a fairly significant ipmi list bug This bug could cause lists to be corrupted" * tag 'for-linus-4.7-2' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: Remove smi_msg from waiting_rcv_msgs list before handle_one_recv_msg()
2016-06-15Update my main e-mails at the Kernel treeMauro Carvalho Chehab
For the third time in three years, I'm changing my e-mail at Samsung. That's bad, as it may stop communications with me for a while. So, this time, I'll also add the mchehab@kernel.org e-mail, as it remains stable since ever. Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-16Merge branch 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes radeon and amdgpu fixes for 4.7. Highlights: - fixes for GPU VM passthrough - fixes for powerplay on Polaris GPUs - pll fixes for rs780/880 * 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux: drm/amd/powerplay: select samu dpm 0 as boot level on polaris. drm/amd/powerplay: update powerplay table parsing Revert "drm/amdgpu: add pipeline sync while vmid switch in same ctx" drm/amdgpu/gfx7: fix broken condition check drm/radeon: fix asic initialization for virtualized environments amdgpu: fix asic initialization for virtualized environments (v2) drm/radeon: don't use fractional dividers on RS[78]80 if SS is enabled drm/radeon: do not hard reset GPU while freezing on r600/r700 family
2016-06-15macsec: fix SA initializationSabrina Dubroca
The ASYNC flag prevents initialization on some physical machines. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15macsec: allocate sg and iv on the heapSabrina Dubroca
For the crypto callbacks to work properly, we cannot have sg and iv on the stack. Use kmalloc instead, with a single allocation for aead_request + scatterlist + iv. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15macsec: add rcu_barrier() on module exitSabrina Dubroca
Without this, the various uses of call_rcu could cause a kernel panic. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15[media] media: fix media devnode ioctl/syscall and unregister raceShuah Khan
Media devnode open/ioctl could be in progress when media device unregister is initiated. System calls and ioctls check media device registered status at the beginning, however, there is a window where unregister could be in progress without changing the media devnode status to unregistered. process 1 process 2 fd = open(/dev/media0) media_devnode_is_registered() (returns true here) media_device_unregister() (unregister is in progress and devnode isn't unregistered yet) ... ioctl(fd, ...) __media_ioctl() media_devnode_is_registered() (returns true here) ... media_devnode_unregister() ... (driver releases the media device memory) media_device_ioctl() (By this point devnode->media_dev does not point to allocated memory. use-after free in in mutex_lock_nested) BUG: KASAN: use-after-free in mutex_lock_nested+0x79c/0x800 at addr ffff8801ebe914f0 Fix it by clearing register bit when unregister starts to avoid the race. process 1 process 2 fd = open(/dev/media0) media_devnode_is_registered() (could return true here) media_device_unregister() (clear the register bit, then start unregister.) ... ioctl(fd, ...) __media_ioctl() media_devnode_is_registered() (return false here, ioctl returns I/O error, and will not access media device memory) ... media_devnode_unregister() ... (driver releases the media device memory) Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reported-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Tested-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-15[media] media: fix use-after-free in cdev_put() when app exits after driver ↵Shuah Khan
unbind When driver unbinds while media_ioctl is in progress, cdev_put() fails with when app exits after driver unbinds. Add devnode struct device kobj as the cdev parent kobject. cdev_add() gets a reference to it and releases it in cdev_del() ensuring that the devnode is not deallocated as long as the application has the device file open. media_devnode_register() initializes the struct device kobj before calling cdev_add(). media_devnode_unregister() does cdev_del() and then deletes the device. devnode is released when the last reference to the struct device is gone. This problem is found on uvcvideo, em28xx, and au0828 drivers and fix has been tested on all three. kernel: [ 193.599736] BUG: KASAN: use-after-free in cdev_put+0x4e/0x50 kernel: [ 193.599745] Read of size 8 by task media_device_te/1851 kernel: [ 193.599792] INFO: Allocated in __media_device_register+0x54 kernel: [ 193.599951] INFO: Freed in media_devnode_release+0xa4/0xc0 kernel: [ 193.601083] Call Trace: kernel: [ 193.601093] [<ffffffff81aecac3>] dump_stack+0x67/0x94 kernel: [ 193.601102] [<ffffffff815359b2>] print_trailer+0x112/0x1a0 kernel: [ 193.601111] [<ffffffff8153b5e4>] object_err+0x34/0x40 kernel: [ 193.601119] [<ffffffff8153d9d4>] kasan_report_error+0x224/0x530 kernel: [ 193.601128] [<ffffffff814a2c3d>] ? kzfree+0x2d/0x40 kernel: [ 193.601137] [<ffffffff81539d72>] ? kfree+0x1d2/0x1f0 kernel: [ 193.601154] [<ffffffff8157ca7e>] ? cdev_put+0x4e/0x50 kernel: [ 193.601162] [<ffffffff8157ca7e>] cdev_put+0x4e/0x50 kernel: [ 193.601170] [<ffffffff815767eb>] __fput+0x52b/0x6c0 kernel: [ 193.601179] [<ffffffff8117743a>] ? switch_task_namespaces+0x2a kernel: [ 193.601188] [<ffffffff815769ee>] ____fput+0xe/0x10 kernel: [ 193.601196] [<ffffffff81170023>] task_work_run+0x133/0x1f0 kernel: [ 193.601204] [<ffffffff8117746e>] ? switch_task_namespaces+0x5e kernel: [ 193.601213] [<ffffffff8111b50c>] do_exit+0x72c/0x2c20 kernel: [ 193.601224] [<ffffffff8111ade0>] ? release_task+0x1250/0x1250 - - - kernel: [ 193.601360] [<ffffffff81003587>] ? exit_to_usermode_loop+0xe7 kernel: [ 193.601368] [<ffffffff810035c0>] exit_to_usermode_loop+0x120 kernel: [ 193.601376] [<ffffffff810061da>] syscall_return_slowpath+0x16a kernel: [ 193.601386] [<ffffffff82848b33>] entry_SYSCALL_64_fastpath+0xa6 Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Tested-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-15[media] media-device: dynamically allocate struct media_devnodeMauro Carvalho Chehab
struct media_devnode is currently embedded at struct media_device. While this works fine during normal usage, it leads to a race condition during devnode unregister. the problem is that drivers assume that, after calling media_device_unregister(), the struct that contains media_device can be freed. This is not true, as it can't be freed until userspace closes all opened /dev/media devnodes. In other words, if the media devnode is still open, and media_device gets freed, any call to an ioctl will make the core to try to access struct media_device, with will cause an use-after-free and even GPF. Fix this by dynamically allocating the struct media_devnode and only freeing it when it is safe. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-15[media] media-devnode: fix namespace messMauro Carvalho Chehab
Along all media controller code, "mdev" is used to represent a pointer to struct media_device, and "devnode" for a pointer to struct media_devnode. However, inside media-devnode.[ch], "mdev" is used to represent a pointer to struct media_devnode. This is very confusing and may lead to development errors. So, let's change all occurrences at media-devnode.[ch] to also use "devnode" for such pointers. This patch doesn't make any functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-16Merge branch 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux ↵Dave Airlie
into drm-fixes just a single fix for a regression introduced by IOMMU API changes in v4.7. * 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux: drm/etnaviv: initialize iommu domain page size
2016-06-15net/mlx4_en: initialize cmd.context_lock spinlock earlierEric Dumazet
Maciej Żenczykowski reported lockdep warning a spinlock was not registered before being held in mlx4_cmd_wake_completions() cmd.context_lock initialization is not at the right place. 1) mlx4_cmd_use_events() can be called multiple times. Calling spin_lock_init() on a live spinlock can lead to hangs. 2) mlx4_cmd_wake_completions() can be called while lock has not been initialized. Lockdep complains, and current logic is not race prone. It seems better to move the initialization earlier in mlx4_load_one() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Maciej Żenczykowski <maze@google.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15ata: fix return value check in ahci_seattle_get_port_info()Wei Yongjun
In case of error, the function devm_kzalloc() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-06-15iommu/rockchip: Fix zap cache during device attachJohn Keeping
rk_iommu_command() takes a struct rk_iommu and iterates over the slave MMUs, so this is doubly wrong in that we're passing in the wrong pointer and talking to MMUs that we shouldn't be. Fixes: cd6438c5f844 ("iommu/rockchip: Reconstruct to support multi slaves") Cc: stable@vger.kernel.org Signed-off-by: John Keeping <john@metanate.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-06-15drm/etnaviv: initialize iommu domain page sizeLucas Stach
Since d16e0faab91 (iommu: Allow selecting page sizes per domain) the iommu core demands the page size to be set per domain, otherwise any mapping attempts will be dropped. Make sure to set a valid page size for the etnaviv iommu. Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2016-06-15arm: pmu: Fix non-devicetree probingMark Salter
There is a problem in the non-devicetree PMU probing where some probe functions may get the number of supported events through smp_call_function_any() using the arm_pmu supported_cpus mask. But at the time the probe function is called, the supported_cpus mask is empty so the call fails. This patch makes sure the mask is set before calling the init function rather than after. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-06-15extcon: palmas: Fix boot up state of VBUS when using GPIO detectionRoger Quadros
If USB cable is connected prior to boot, we don't get any interrupts so we must manually check the VBUS state and report it during probe. If we don't do it then USB controller will never know that peripheral cable was connected till the user unplugs and replugs the cable. Fixes: b7aad8e2685b ("extcon: palmas: Add the support for VBUS detection by using GPIO") Cc: stable@vger.kernel.org Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-15Merge branch 'linux-4.7' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
* 'linux-4.7' of git://github.com/skeggsb/linux: drm/nouveau/iccsense: fix memory leak drm/nouveau/Revert "drm/nouveau/device/pci: set as non-CPU-coherent on ARM64"
2016-06-15drm/nouveau/iccsense: fix memory leakBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-17 23:21:50 +0000