| Age | Commit message (Collapse) | Author |
|---|
|
Some platforms that use fs_enet don't have the PER register clock. This
optional dependency on the clock was incorrectly made mandatory when
switching to devm_ accessors.
Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Closes: https://lore.kernel.org/netdev/4e4defa9-ef2f-4ff1-95ca-6627c24db20c@wanadoo.fr/
Fixes: c614acf6e8e1 ("net: ethernet: fs_enet: simplify clock handling with devm accessors")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/20240914081821.209130-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
* Raw NAND changes
The use of for_each_child_of_node_scoped() has been spread into the
subsystem drivers. Aside from that, a couple of exit path have been
fixed (mtk, denali), the TI GPMC bindings have been enhanced to comply
with up-to-date partition descriptions and as always there is a load of
small and misc fixes.
* SPI-NAND changes
The most impacting series this cycle is bringing support for continuous
reads in the SPI-NAND subsystem. This is a feature already merged in the
raw NAND subsystem which allows optimizing the internal fetch times in
the chip while reading sequential pages within an eraseblock. For now
only Macronix NANDs benefit from this feature. While we are talking
about Macronix, some of their chip need an explicit action for selecting
a different plane, and support for it has also been brought.
The bitflip threshold has also been set to the same arbitrary level as
in the raw NAND subsystem to optimize wear leveling decisions, and
finally support for a new Winbond chip has been added.
|
|
SPI NOR changes for 6.12
Notable changes:
- Add Write Protect support for N25Q064A.
- New flash support for Zetta ZD25Q128C and Spansion S28HS256T.
- Fix a NULL dereference in probe path for flashes without a name. The
probe path tries to access the name without checking its existence
first. S28HS256T is the first flash to define its entry without a
name, uncovering this issue.
|
|
Add support for multicast filtering in HSR mode
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20240911081603.2521729-6-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The HSR stack allows to offload its Tx packet duplication functionality to
the hardware. Enable this offloading feature for ICSSG driver. Add support
to offload HSR Tx Tag Insertion and Rx Tag Removal and duplicate discard.
hsr tag insertion offload and hsr dup offload are tightly coupled in
firmware implementation. Both these features need to be enabled / disabled
together.
Duplicate discard is done as part of RX tag removal and it is
done by the firmware. When driver sends the r30 command
ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE, firmware does RX tag removal as well as
duplicate discard.
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20240911081603.2521729-5-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for offloading HSR port-to-port frame forward to hardware.
When the slave interfaces are added to the HSR interface, the PRU cores
will be stopped and ICSSG HSR firmwares will be loaded to them.
Similarly, when HSR interface is deleted, the PRU cores will be
restarted and the last used firmwares will be reloaded. PRUeth
interfaces will be back to the last used mode.
This commit also renames some APIs that are common between switch and
hsr mode with '_fw_offload' suffix.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20240911081603.2521729-4-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The def_inc is stored in icss_iep structure. Currently default increment
(ns per clock tick) is hardcoded to 4 (Clock frequency being 250 MHz).
Change this to use the iep->def_inc variable as the iep structure is now
accessible to the driver files.
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20240911081603.2521729-3-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move icss_iep structure definition and to icss_iep.h file so that the
structure members can be used / accessed by all icssg driver files.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20240911081603.2521729-2-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix flash probing by name. Flash entries without a name are allowed
since commit 15eb8303bb42 ("mtd: spi-nor: mark the flash name as
obsolete"). But it was just until recently that a flash entry without a
name was actually introduced. This triggers a bug in the legacy probe by
name path. Skip entries without a name to fix it.
Fixes: 2095e7da8049 ("mtd: spi-nor: spansion: Add support for S28HS256T")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/r/66c8ebb0-1324-4ad9-9926-8d4eb7e1e63a@nvidia.com/
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20240909072854.812206-1-mwalle@kernel.org
|
|
Infineon S28HS256T is 256Mb Octal SPI device which has same
functionalities with 512Mb and 1Gb parts.
Link: https://www.infineon.com/dgdl/Infineon-S28HS256T_S28HL256T_256Mb_SEMPER_Flash_Octal_interface_1_8V_3-DataSheet-v02_00-EN.pdf?fileId=8ac78c8c8fc2dd9c018fc66787aa0657
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20240830080428.6994-1-Takahiro.Kuwano@infineon.com
|
|
Zetta normally uses BAh as its vendor ID. But for the ZD25Q128C they
took the one from Winbond and messed up the size parameters in SFDP.
Most functions seem compatible with the W25Q128, we just have to fix up
the size.
Link: http://www.zettadevice.com/upload/file/20150821/DS_Zetta_25Q128_RevA.pdf
Link: https://www.lcsc.com/datasheet/lcsc_datasheet_2312081757_Zetta-ZD25Q128CSIGT_C19626875.pdf
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20240804221535.291923-1-mwalle@kernel.org
|
|
These flash chips are used on Google / TP-Link / ASUS OnHub devices, and
OnHub devices are write-protected by default (same as any other
ChromeOS/Chromebook system). I've referred to datasheets, and tested on
OnHub devices.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20240726185825.142733-1-computersforpeace@gmail.com
|
|
Writing to the Flash in `sst_nor_write()` is a 3-step process:
first an optional one-byte write to get 2-byte-aligned, then the
bulk of the data is written out in vendor-specific 2-byte writes.
Finally, if there's a byte left over, another one-byte write.
This was implemented 3 times in the body of `sst_nor_write()`.
To reduce code duplication, factor out these sub-steps to their
own function.
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
[pratyush@kernel.org: fixup whitespace, use %zu instead of %i in WARN()]
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20240710091401.1282824-1-csokas.bence@prolan.hu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- One Intel patch that I mistakenly merged into for-next despite it
belonging in fixes: add Arrow Lake-H/U ACPI ID so this Arrow Lake
chip probes.
- One fix making the CY895x0 reg cache work, which is good because it
makes the device work too.
* tag 'pinctrl-v6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: pinctrl-cy8c95x0: Fix regcache
pinctrl: meteorlake: Add Arrow Lake-H/U ACPI ID
|
|
Temp channel 0 aka temp1 can have a temp1_max_alarm attribute for
power_supply devices which have a POWER_SUPPLY_PROP_TEMP_ALERT_MAX
property.
HWMON_T_MAX_ALARM was missing from power_supply_hwmon_info for
temp channel 0, causing the hwmon temp1_max_alarm attribute to be
missing from such power_supply devices.
Add this to power_supply_hwmon_info to fix this.
Fixes: f1d33ae806ec ("power: supply: remove duplicated argument in power_supply_hwmon_info")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240908185337.103696-2-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
power_supply_property_is_writeable() gets called from the is_visible()
callback for the sysfs attributes of power_supply class devices and for
the sysfs attributes of power_supply core instantiated hwmon class devices.
These sysfs attributes get registered by the device_add() respectively
power_supply_add_hwmon_sysfs() calls in power_supply_register().
use_cnt gets initialized to 0 and is incremented only after these calls.
So when power_supply_property_is_writeable() gets called it always return
-ENODEV because of use_cnt == 0.
This causes all the attributes to have permissions of 444 even those which
should be writable. This used to be a problem only for hwmon sysfs
attributes but since commit be6299c6e55e ("power: supply: sysfs: use
power_supply_property_is_writeable()") this now also impacts power_supply
class sysfs attributes.
Fixes: be6299c6e55e ("power: supply: sysfs: use power_supply_property_is_writeable()")
Fixes: e67d4dfc9ff1 ("power: supply: Add HWMON compatibility layer")
Cc: stable@vger.kernel.org
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/stable/20240908185337.103696-1-hdegoede%40redhat.com
Link: https://lore.kernel.org/r/20240908185337.103696-1-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.12
This is a very large set of changes, almost all in drivers rather than
the core. Even with the addition of several quite large drivers the
overall diffstat is negative thanks to the removal of some old Intel
board support which has been obsoleted by the AVS driver, helped a bit
by some factoring out into helpers (especially around the Soundwire
machine drivers for x86).
Highlights include:
- More simplifications and cleanups throughout the subsystem from
Morimoto-san.
- Extensive cleanups and refactoring of the Soundwire drivers to make
better use of helpers.
- Removal of Intel machine support obsoleted by the AVS driver.
- Lots of DT schema conversions.
- Machine support for many AMD and Intel x86 platforms.
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320
SoundWire and rev C, and Texas Instruments TAS2563
|
|
This is completely unused.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-10-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
EPROBE_DEFER, which probably wasn't available when this driver was
written, can be used instead of waiting manually.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20240912024903.6201-9-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
of_property_read_u32 can be used.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-8-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Avoids having to use own struct member.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-7-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cleans it up automatically. No need to handle manually.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-6-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Switching to devm management of mii_bus allows to remove
mdiobus_unregister calls and thus avoids needing a mii_bus global struct
member.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-5-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allows removing manual iounmap.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-4-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's the last to go in remove. Safe to let devm handle it.
Also move request_irq to probe for clarity. It's removed in _remove not
close.
Use dev_err_probe instead of printk. Handles EPROBE_DEFER automatically.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-3-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allows to simplify the code slightly. This is safe to do as free_netdev
gets called last.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-2-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Display channel info in the RPM map debugfs output.
With this, cat /sys/kernel/debug/cn10k/rvu_pf_rpm_map
would display channel number for each device in addition to
the existing data.
Sample output:
PCI dev RVU PF Func NIX block rpm LMAC CHAN
0002:02:00.0 0x400 NIX0 rpm0 LMAC0 256
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Link: https://patch.msgid.link/20240912161450.164402-3-lcherian@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-09-11
The first patch is by Uwe Kleine-König targets all CAN platform driver
and switches back the remove function to struct
platform_driver::remove().
A patch by Stefan Mätje fixes the help text of the ESD USB driver.
Jake Hamby's patch masks an unneeded interrupt in the m_can driver.
The last 2 patches target the rockchip_canfd driver. Arnd Bergmann's
patch reworks the delay calculation for the timekeeping worker, a
patch by me fixes the decoding of the error code register.
* tag 'linux-can-next-for-6.12-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rockchip_canfd: rkcanfd_handle_error_int_reg_ec(): fix decoding of error code register
can: rockchip_canfd: rkcanfd_timestamp_init(): rework delay calculation
can: m_can: m_can_chip_config(): mask timestamp wraparound IRQ
can: usb: Kconfig: Fix list of devices for esd_usb driver
can: Switch back to struct platform_driver::remove()
====================
Link: https://patch.msgid.link/20240912080438.2826895-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Return an error if dma_set_mask_and_coherent() fails. Don't return
success.
Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/f53ed942-5ac2-424b-a1ed-9473c599905e@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-09-12
Kuniyuki Iwashima's patch fixes an incomplete bug fix in the CAN BCM
protocol, which was introduced during v6.11.
A patch by Stefan Mätje removes the unsupported CAN_CTRLMODE_3_SAMPLES
mode for CAN-USB/3-FD devices in the esd_usb driver.
The next patch is by Martin Jocic and enables 64-bit DMA addressing
for the kvaser_pciefd driver.
The last two patches both affect the m_can driver. Jake Hamby's patch
activates NAPI before interrupts are activated, a patch by me moves
the stopping of the clock after the device has been shut down.
* tag 'linux-can-fixes-for-6.11-20240912' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: m_can: m_can_close(): stop clocks after device has been shut down
can: m_can: enable NAPI before enabling interrupts
can: kvaser_pciefd: Enable 64-bit DMA addressing
can: esd_usb: Remove CAN_CTRLMODE_3_SAMPLES for CAN-USB/3-FD
can: bcm: Clear bo->bcm_proc_read after remove_proc_entry().
====================
Link: https://patch.msgid.link/20240912075804.2825408-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make 'ethtool -S <intf>' output show some per rq/wq statistics that
don't exist in the netdev qstats.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20240912005039.10797-5-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Report per queue wq/rq statistics in netdev qstats.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20240912005039.10797-4-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Collect and per rq/wq statistics.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20240912005039.10797-3-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In enic_ethtool.c there is no need to use static const variables to store
array sizes when a macro can be used instead.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20240912005039.10797-2-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PCI vendor ID for Cadence is defined in pci_ids.h. Use it.
While at it, move to PCI_VDEVICE() macro and usual pattern for
PCI device ID.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240913125146.3628751-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The enetc driver uses ifdefs when checking whether
CONFIG_FSL_ENETC_PTP_CLOCK is enabled in a number of places. This works
if the driver is built-in but fails if the driver is available as a
kernel module. Replace the instances of ifdef with use of the IS_ENABLED
macro, that will evaluate as true when this feature is built as a kernel
module and follows the kernel's coding style.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240912173742.484549-1-martyn.welch@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver calls netif_napi_set_irq() and then calls netif_napi_add(),
which calls netif_napi_add_weight(). At the end of
netif_napi_add_weight() is a call to netif_napi_set_irq(napi, -1), which
clears the previously set napi->irq value. Fix this by calling
netif_napi_set_irq() after calling netif_napi_add().
This was found when reviewing another patch and I have no way to test
this, but the fix seemed relatively straight forward.
Fixes: bc6107771bb4 ("eth: fbnic: Allocate a netdevice and napi vectors with queues")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20240912174922.10550-1-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
En-Wei reported that traffic breaks if cable is unplugged for more
than 3s and then re-plugged. This was supposed to be fixed by
621735f59064 ("r8169: fix rare issue with broken rx after link-down on
RTL8125"). But apparently this didn't fix the issue for everybody.
The 3s threshold rang a bell, as this is the delay after which ALDPS
kicks in. And indeed disabling ALDPS fixes the issue for this user.
Maybe this fixes the issue in general. In a follow-up step we could
remove the first fix attempt and see whether anybody complains.
Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125")
Tested-by: En-Wei WU <en-wei.wu@canonical.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/778b9d86-05c4-4856-be59-cde4487b9e52@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "err" is always zero, so the following branch can never be executed:
if (err) {
ndev->stats.rx_dropped++;
kfree_skb(skb);
}
Therefore, the "if" statement can be removed.
Use "ndev->stats.rx_errors" to count "napi_build_skb()" failure
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/20240911135828.378317-1-usama.anjum@collabora.com
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Link: https://patch.msgid.link/20240913014731.149739-1-qianqiang.liu@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- btusb: Add MediaTek MT7925-B22M support ID 0x13d3:0x3604
- btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
- btrtl: Add the support for RTL8922A
- btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
- btnxpuart: Add support for ISO packets
- btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
- btsdio: Do not bind to non-removable CYW4373
- hci_uart: Add support for Amlogic HCI UART
* tag 'for-net-next-2024-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (27 commits)
Bluetooth: btintel_pcie: Allocate memory for driver private data
Bluetooth: btusb: Fix not handling ZPL/short-transfer
Bluetooth: btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
Bluetooth: btsdio: Do not bind to non-removable CYW4373
Bluetooth: hci_sync: Ignore errors from HCI_OP_REMOTE_NAME_REQ_CANCEL
Bluetooth: CMTP: Mark BT_CMTP as DEPRECATED
Bluetooth: replace deprecated strncpy with strscpy_pad
Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED
Bluetooth: btrtl: Set msft ext address filter quirk for RTL8852B
Bluetooth: Use led_set_brightness() in LED trigger activate() callback
Bluetooth: btrtl: Use kvmemdup to simplify the code
Bluetooth: btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
Bluetooth: btrtl: Add the support for RTL8922A
Bluetooth: hci_ldisc: Use speed set by btattach as oper_speed
Bluetooth: hci_conn: Remove redundant memset after kzalloc
Bluetooth: L2CAP: Remove unused declarations
dt-bindings: bluetooth: bring the HW description closer to reality for wcn6855
Bluetooth: btnxpuart: Add support for ISO packets
Bluetooth: hci_h4: Add support for ISO packets in h4_recv.h
Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
...
====================
Link: https://patch.msgid.link/20240912214317.3054060-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During the introduction of struct bpf_net_context handling for
XDP-redirect, the netkit driver has been missed, which also requires it
because NETKIT_REDIRECT invokes skb_do_redirect() which is accessing the
per-CPU variables. Otherwise we see the following crash:
BUG: kernel NULL pointer dereference, address: 0000000000000038
bpf_redirect()
netkit_xmit()
dev_hard_start_xmit()
Set the bpf_net_context before invoking netkit_xmit() program within the
netkit driver.
Fixes: 401cb7dae813 ("net: Reference bpf_redirect_info via task_struct on PREEMPT_RT.")
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20240912155620.1334587-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Prevent a possible deadlock (reported by lockdep) when a driver
relinquishes a pci_dev, another driver claims it, and one uses
managed pcim_enable_device() and the other doesn't (Philipp Stanner)
* tag 'pci-v6.11-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Fix potential deadlock in pcim_intx()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few last minute fixes for v6.11, they're all individually
unremarkable and only last minute due to when they came in"
* tag 'spi-fix-v6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: nxp-fspi: fix the KASAN report out-of-bounds bug
spi: geni-qcom: Fix incorrect free_irq() sequence
spi: geni-qcom: Undo runtime PM changes at driver exit time
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- Revert of earlier fix sent for non-continuous port map programming
which caused regression on Intel platforms
* tag 'soundwire-6.11-fixes_2' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: stream: Revert "soundwire: stream: fix programming slave ports for non-continous port maps"
|
|
This file does not compile because <linux/mfd/sm5703.h> is missing.
In KConfig, it depends on MFD_SM5703.
Both MFD_SM5703 and the missing include rely on another patch that never
got merged. The last iteration related to this patch is [1].
So remove this dead-code and undo commit e8858ba89ca3 ("regulator:
sm5703-regulator: Add regulators support for SM5703 MFD")
[1]: https://lore.kernel.org/lkml/20220423085319.483524-5-markuss.broks@gmail.com/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/0f5da91a05e7343d290c88e3c583b674cf6219ac.1725910247.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes pull, the amdgpu JPEG engine fixes are probably the
biggest, they look to block some register accessing, otherwise there
are just minor fixes and regression fixes all over.
nouveau had a regression report going back a few kernels that finally
got fixed, Not entirely happy with so many changes so late, but they
all seem quite benign apart from the jpeg one.
dma-buf/heaps:
- fix off by one in CMA heap fault handler
syncobj:
- fix syncobj leak in drm_syncobj_eventfd_ioctl
amdgpu:
- Avoid races between set_drr() functions and dc_state_destruct()
- Fix regerssion related to zpos
- Fix regression related to overlay cursor
- SMU 14.x updates
- JPEG fixes
- Silence an UBSAN warning
amdkfd:
- Fetch cacheline size from IP discovery
i915:
- Prevent a possible int overflow in wq offsets
xe:
- Remove a double include
- Fix null checks and UAF
- Fix access_ok check in user_fence_create
- Fix compat IS_DISPLAY_STEP() range
- OA fix
- Fixes in show_meminfo
nouveau:
- fix GP10x regression on boot
stm:
- add COMMON_CLK dep
rockchip:
- iommu api change
tegra:
- iommu api change"
* tag 'drm-fixes-2024-09-13' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
drm/xe/client: add missing bo locking in show_meminfo()
drm/xe/client: fix deadlock in show_meminfo()
drm/xe/oa: Enable Xe2+ PES disaggregation
drm/xe/display: fix compat IS_DISPLAY_STEP() range end
drm/xe: Fix access_ok check in user_fence_create
drm/xe: Fix possible UAF in guc_exec_queue_process_msg
drm/xe: Remove fence check from send_tlb_invalidation
drm/xe/gt: Remove double include
drm/amd/display: Add all planes on CRTC to state for overlay cursor
drm/amdgpu/atomfirmware: Silence UBSAN warning
drm/amd/amdgpu: apply command submission parser for JPEG v1
drm/amd/amdgpu: apply command submission parser for JPEG v2+
drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3
drm/amd/pm: update the features set on smu v14.0.2/3
drm/amd/display: Do not reset planes based on crtc zpos_changed
drm/amd/display: Avoid race between dcn35_set_drr() and dc_state_destruct()
drm/amd/display: Avoid race between dcn10_set_drr() and dc_state_destruct()
drm/amdkfd: Add cache line size info
drm/tegra: Use iommu_paging_domain_alloc()
drm/rockchip: Use iommu_paging_domain_alloc()
...
|
|
_regulator_get() contains a lot of common code doing checks prior to the
regulator lookup and housekeeping work after the lookup. Almost all the
code could be shared with a OF-specific variant of _regulator_get().
Split out the common parts so that they can be reused. The OF-specific
version of _regulator_get() will be added in a subsequent patch.
No functional changes were made.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240911072751.365361-4-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
for-6.12/block
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.12
- A syntax cleanup (Shen)
- Fix a Kconfig linking error (Arnd)
- New queue-depth quirk (Keith)"
* tag 'nvme-6.12-2024-09-13' of git://git.infradead.org/nvme:
nvme-pci: qdepth 1 quirk
nvme-tcp: fix link failure for TCP auth
nvme: Convert comma to semicolon
|
|
Another device has been reported to be unreliable if we have more than
one outstanding command. In this new case, data corruption may occur.
Since we have two devices now needing this quirky behavior, make a
generic quirk flag.
The same Apple quirk is clearly not "temporary", so update the comment
while moving it.
Link: https://lore.kernel.org/linux-nvme/191d810a4e3.fcc6066c765804.973611676137075390@collabora.com/
Reported-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Christoph Hellwig hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
devm_hwmon_device_unregister() has no in-tree user, and its implementation
is wrong since it does not pass the to-be-removed hardware monitoring
device as parameter. I do not envision a valid use for it; drivers needing
it should not have called devm_hwmon_device_register_with_info() in the
first place. Remove it.
Reported-by: Matthew Sanders <m@ttsande.rs>
Closes: https://lore.kernel.org/linux-hwmon/488b3bdf870ea76c4b943dbe5fd15ac8113019dc.camel@kernel.org/
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
