summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-05-19thermal/drivers/qcom/lmh: Add sc8180x compatibleBjorn Andersson
The LMh instances in the Qualcomm SC8180X platform looks to behave similar to those in SM8150, add additional compatibles to allow platform specific behavior to be added if needed. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220502164504.3972938-1-bjorn.andersson@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/rz2gl: Fix OTP Calibration Register valuesBiju Das
As per the latest RZ/G2L Hardware User's Manual (Rev.1.10 Apr, 2022), the bit 31 of TSU OTP Calibration Register(OTPTSUTRIM) indicates whether bit [11:0] of OTPTSUTRIM is valid or invalid. This patch updates the code to reflect this change. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220428093346.7552-1-biju.das.jz@bp.renesas.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal: thermal_of: fix typo on __thermal_bind_paramsCorentin Labbe
Add a missing s to __thermal_bind_param kernel doc comment. This fixes the following sparse warnings: drivers/thermal/thermal_of.c:50: warning: expecting prototype for struct __thermal_bind_param. Prototype was for struct __thermal_bind_params instead Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Link: https://lore.kernel.org/r/20220426064113.3787826-1-clabbe@baylibre.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probeZheng Yongjun
platform_get_resource() may return NULL, add proper check to avoid potential NULL dereferencing. Fixes: 250e211057c72 ("thermal: broadcom: Add Stingray thermal driver") Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20220425092929.90412-1-zhengyongjun3@huawei.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/thermal_of: Add change_mode ops support for thermal_of sensorManaf Meethalavalappu Pallikunhi
The sensor driver which register through thermal_of interface doesn't have an option to get thermal zone mode change notification from thermal core. Add support for change_mode ops in thermal_of interface so that sensor driver can use this ops for mode change notification. Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com> Link: https://lore.kernel.org/r/1646767586-31908-1-git-send-email-quic_manafm@quicinc.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/bcm2711: Don't clamp temperature at zeroStefan Wahren
The thermal sensor on BCM2711 is capable of negative temperatures, so don't clamp the measurements at zero. Since this was the only use for variable t, drop it. This change based on a patch by Dom Cobley, who also tested the fix. Fixes: 59b781352dc4 ("thermal: Add BCM2711 thermal driver") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220412195423.104511-1-stefan.wahren@i2se.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/tsens: Add compat string for the qcom,msm8960Dmitry Baryshkov
On apq8064 (msm8960) platforms the tsens device is created manually by the gcc driver. Prepare the tsens driver for the qcom,msm8960-tsens device instantiated from the device tree. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220406002648.393486-3-dmitry.baryshkov@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/k3: Add hwmon supportMassimiliano Minella
Expose the thermal sensors on K3 AM654 as hwmon devices, so that temperatures could be read using lm-sensors. Signed-off-by: Massimiliano Minella <massimiliano.minella@gmail.com> Link: https://lore.kernel.org/r/20220401151656.913166-1-massimiliano.minella@se.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/qcom: Add support for PMIC5 Gen2 ADCTMJishnu Prakash
Add support for PMIC5 Gen2 ADC_TM, used on PMIC7 chips. It is a close counterpart of PMIC7 ADC and has the same functionality as PMIC5 ADC_TM, for threshold monitoring and interrupt generation. It is present on PMK8350 alone, like PMIC7 ADC and can be used to monitor up to 8 ADC channels, from any of the PMIC7 PMICs having ADC on a target, through PBS(Programmable Boot Sequence). Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/1648991869-20899-5-git-send-email-quic_jprakash@quicinc.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/qcom: Add support for multiple generations of devicesJishnu Prakash
Refactor code to support multiple generations of ADC_TM devices by defining gen number, irq name and disable, configure, isr and init APIs in the individual data structs. Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/1648991869-20899-4-git-send-email-quic_jprakash@quicinc.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19iio: adc: qcom-vadc-common: add reverse scaling for PMIC5 Gen2 ADC_TMJishnu Prakash
Add reverse scaling function for PMIC5 Gen2 ADC_TM, to convert temperature to raw ADC code, for setting thresholds for thermistor channels. Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/1648991869-20899-3-git-send-email-quic_jprakash@quicinc.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/rcar_thermal: Use platform_get_irq_optional() to get the ↵Lad Prabhakar
interrupt platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_optional(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220110144039.5810-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19rtc: ftrtc010: Fix error handling in ftrtc010_rtc_probeMiaoqian Lin
In the error handling path, the clk_prepare_enable() function call should be balanced by a corresponding 'clk_disable_unprepare()' call , as already done in the remove function. clk_disable_unprepare calls clk_disable() and clk_unprepare(). They will use IS_ERR_OR_NULL to check the argument. Fixes: ac05fba39cc5 ("rtc: gemini: Add optional clock handling") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220403054912.31739-1-linmq006@gmail.com
2022-05-19rtc: mt6397: check return value after calling platform_get_resource()Yang Yingliang
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Fixes: fc2979118f3f ("rtc: mediatek: Add MT6397 RTC driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220505125043.1594771-1-yangyingliang@huawei.com
2022-05-19drm/i915/uc: Fix undefined behavior due to shift overflowing the constantBorislav Petkov
Fix: In file included from <command-line>:0:0: drivers/gpu/drm/i915/gt/uc/intel_guc.c: In function ‘intel_guc_send_mmio’: ././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_1047’ \ declared with attribute error: FIELD_PREP: mask is not constant _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) and other build errors due to shift overflowing values. See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory details as to why it triggers with older gccs only. v2 by Jani: - Drop the i915_reg.h changes Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Ruiqi GONG <gongruiqi1@huawei.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220518113315.1305027-2-jani.nikula@intel.com (cherry picked from commit 962bd34bb457f6353f333ce234c3fd34cad1c00a)
2022-05-19drm/i915/reg: fix undefined behavior due to shift overflowing the constantJani Nikula
Use REG_GENMASK() and REG_FIELD_PREP() to avoid errors due to -fsanitize=shift. References: https://lore.kernel.org/r/20220405151517.29753-12-bp@alien8.de Reported-by: Borislav Petkov <bp@suse.de> Reported-by: Ruiqi GONG <gongruiqi1@huawei.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220518113315.1305027-1-jani.nikula@intel.com (cherry picked from commit 230fb39ff7e07bd0324c87acf08dd2c9b0bbcea8)
2022-05-19drm/i915/gt: Fix use of static in macro mismatchAndi Shyti
The INTEL_GT_RPS_SYSFS_ATTR was creating to different structures but. When called with the "static" keyword this is affecting only the first structure, while the second is created as non static. Move the static keyword inside the macros to affect both the structures. Reported-by: Jani Nikula <jani.nikula@linux.intel.com> Fixes: 56a709cf77468 ("drm/i915/gt: Create per-tile RPS sysfs interfaces") Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220510140447.80200-1-andi.shyti@linux.intel.com (cherry picked from commit 1ade30812abfdd1c161a155fd54b0dd594c217ee) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2022-05-19drm/i915/audio: fix audio code enable/disable pipe loggingJani Nikula
Need to use pipe_name(pipe) instead of pipe directly. Fixes: 1f31e35f2e88 ("drm/i915/audio: unify audio codec enable/disable debug logging") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220512161638.272601-1-jani.nikula@intel.com (cherry picked from commit 945ae909aa76f55ac8c9e95feb3683512d39134a)
2022-05-19drm/i915: Use i915_gem_object_ggtt_pin_ww for reloc_iomapMaarten Lankhorst
When removing short term pins, I've changed the the batch buffer pinning for relocation to use __i915_vma_pin, because i915_gem_object_ggtt_pin_ww was destroying the old vma. This caused regressions, because the functions are not identical. Fix the regressions by calling i915_gem_object_ggtt_pin_ww() again on ggtt-only platforms, but only if the batch can be pinned without being moved. Fixes: b5cfe6f7a6e1 ("drm/i915: Remove short-term pins from execbuf, v6.") Cc: Matthew Auld <matthew.auld@intel.com> Reported-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Matthew Auld <matthew.auld@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5806 Link: https://patchwork.freedesktop.org/patch/msgid/20220511115219.46507-1-maarten.lankhorst@linux.intel.com (cherry picked from commit 451374eef622fca6f00eeeda89aaccb45a30a149) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2022-05-19nfp: flower: support ct merging when mangle action existsYinjun Zhang
Current implementation of ct merging doesn't support the case that the fields mangling in pre_ct rules are matched in post_ct rules. This change is to support merging when mangling mac address, ip address, tos, ttl and l4 port. VLAN and MPLS mangling is not involved yet. Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220518075055.130649-1-simon.horman@corigine.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-19net: fec: Avoid allocating rx buffer using ATOMIC in ndo_openMichael Trimarchi
Make ndo_open less sensitive to memory pressure. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20220518062007.10056-1-michael@amarulasolutions.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-19video: fbdev: pxa3xx-gcu: release the resources correctly in ↵Yang Yingliang
pxa3xx_gcu_probe/remove() In pxa3xx_gcu_probe(), the sequence of error lable is wrong, it will leads some resource leaked, so adjust the sequence to handle the error correctly, and if pxa3xx_gcu_add_buffer() fails, pxa3xx_gcu_free_buffers() need be called. In pxa3xx_gcu_remove(), add missing clk_disable_unpreprare(). Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-19rtc: rzn1: fix platform_no_drv_owner.cocci warningYang Li
Remove .owner field if calls are used which set it automatically. ./drivers/rtc/rtc-rzn1.c:411:3-8: No need to set .owner here. The core will do it. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220518232445.79156-1-yang.lee@linux.alibaba.com
2022-05-19video: fbdev: omapfb: simplify the return expression of nec_8048_connect()Minghao Chi
Simplify the return expression. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-19video: fbdev: omapfb: simplify the return expression of dsi_init_pll_data()Minghao Chi
Simplify the return expression. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-19video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setupMiaoqian Lin
of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: d10715be03bd ("video: ARM CLCD: Add DT support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-19drm/i915: Fix CFI violation with show_dynamic_id()Nathan Chancellor
When an attribute group is created with sysfs_create_group(), the ->sysfs_ops() callback is set to kobj_sysfs_ops, which sets the ->show() callback to kobj_attr_show(). kobj_attr_show() uses container_of() to get the ->show() callback from the attribute it was passed, meaning the ->show() callback needs to be the same type as the ->show() callback in 'struct kobj_attribute'. However, show_dynamic_id() has the type of the ->show() callback in 'struct device_attribute', which causes a CFI violation when opening the 'id' sysfs node under drm/card0/metrics. This happens to work because the layout of 'struct kobj_attribute' and 'struct device_attribute' are the same, so the container_of() cast happens to allow the ->show() callback to still work. Change the type of show_dynamic_id() to match the ->show() callback in 'struct kobj_attributes' and update the type of sysfs_metric_id to match, which resolves the CFI violation. Fixes: f89823c21224 ("drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220513075136.1027007-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit 18fb42db05a0b93ab5dd5eab5315e50eaa3ca620) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2022-05-19drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.cImre Deak
Fix the following sparse warnings: drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: warning: mixing different enum types: drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: unsigned int enum intel_display_power_domain drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: int enum port drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: warning: mixing different enum types: drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: unsigned int enum intel_display_power_domain drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: int enum port drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: warning: mixing different enum types: drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: unsigned int enum intel_display_power_domain drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: unsigned int enum aux_ch drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: warning: mixing different enum types: drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: unsigned int enum intel_display_power_domain drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: unsigned int enum aux_ch Fixes: 979e1b32e0e2 ("drm/i915: Sanitize the port -> DDI/AUX power domain mapping for each platform") Reported-by: Jani Nikula <jani.nikula@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220510114957.406070-1-imre.deak@intel.com (cherry picked from commit 7ecc3cc8a7b39f08eee9aea7b718187583342a70) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2022-05-19drm/i915/gt: Fix build error without CONFIG_PMYueHaibing
drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c: In function ‘act_freq_mhz_show’: drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c:276:20: error: implicit declaration of function ‘sysfs_gt_attribute_r_max_func’ [-Werror=implicit-function-declaration] 276 | u32 actual_freq = sysfs_gt_attribute_r_max_func(dev, attr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Move sysfs_gt_attribute_* macros out of #ifdef block to fix this. Fixes: 56a709cf7746 ("drm/i915/gt: Create per-tile RPS sysfs interfaces") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220506032652.1856-1-yuehaibing@huawei.com (cherry picked from commit 09708b6d82ef473de91c49d90f35e38b0db463f5) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2022-05-19video: fbdev: hyperv_fb: Allow resolutions with size > 64 MB for Gen1Saurabh Sengar
This patch fixes a bug where GEN1 VMs doesn't allow resolutions greater than 64 MB size (eg 7680x4320). Unnecessary PCI check limits Gen1 VRAM to legacy PCI BAR size only (ie 64MB). Thus any, resolution requesting greater then 64MB (eg 7680x4320) would fail. MMIO region assigning this memory shouldn't be limited by PCI bar size. Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-19riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOLSunil V L
Add support for getting the boot hart ID from the Linux EFI stub using RISCV_EFI_BOOT_PROTOCOL. This method is preferred over the existing DT based approach since it works irrespective of DT or ACPI. The specification of the protocol is hosted at: https://github.com/riscv-non-isa/riscv-uefi Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Link: https://lore.kernel.org/r/20220519051512.136724-2-sunilvl@ventanamicro.com [ardb: minor tweaks for coding style and whitespace] Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-05-19USB: serial: option: add Quectel BG95 modemCarl Yin(殷张成)
The BG95 modem has 3 USB configurations that are configurable via the AT command AT+QCFGEXT="usbnet",["ecm"|"modem"|"rmnet"] which make the modem enumerate with the following interfaces, respectively: "modem": Diag + GNSS + Modem + Modem "ecm" : Diag + GNSS + Modem + ECM "rmnet": Diag + GNSS + Modem + QMI Don't support Full QMI messages (e.g WDS_START_NETWORK_INTERFACE) A detailed description of the USB configuration for each mode follows: +QCFGEXT: "usbnet","modem" -------------------------- T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0700 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=884328a2 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +QCFGEXT: "usbnet","ecm" ------------------------ T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0700 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=884328a2 C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +QCFGEXT: "usbnet","rmnet" -------------------------- T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0700 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=884328a2 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Carl Yin <carl.yin@quectel.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-05-18ptp: ocp: change sysfs attr group handlingJonathan Lemon
In the detach path, the driver calls sysfs_remove_group() for the groups it believes has been registered. However, if the group was never previously registered, then this causes a splat. Instead, compute the groups that should be registered in advance, and then call sysfs_create_groups(), which registers them all at once. Update the error handling appropriately. Fixes: c205d53c4923 ("ptp: ocp: Add firmware capability bits for feature gating") Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/r/20220517214600.10606-1-jonathan.lemon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18net/mlx5: fix multiple definitions of mlx5_lag_mpesw_init / ↵Jakub Kicinski
mlx5_lag_mpesw_cleanup static inline is needed in the header. Fixes: 94db33177819 ("net/mlx5: Support multiport eswitch mode") Acked-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20220518183022.2034373-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-19Merge tag 'amd-drm-next-5.19-2022-05-18' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.19-2022-05-18: amdgpu: - Misc code cleanups - Additional SMU 13.x enablement - Smartshift fixes - GFX11 fixes - Support for SMU 13.0.4 - SMU mutex fix - Suspend/resume fix amdkfd: - static checker fix - Doorbell/MMIO resource handling fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220518205621.5741-1-alexander.deucher@amd.com
2022-05-18sfc: siena: Have a unique wrapper ifndef for efx channels headerSaeed Mahameed
Both sfc/efx_channels.h and sfc/siena/efx_channels.h used the same wrapper #ifndef EFX_CHANNELS_H, this patch changes the siena define to be EFX_SIENA_CHANNELS_H to avoid build system confusion. This fixes the following build break: drivers/net/ethernet/sfc/ptp.c:2191:28: error: ‘efx_copy_channel’ undeclared here (not in a function); did you mean ‘efx_ptp_channel’? 2191 | .copy = efx_copy_channel, Fixes: 6e173d3b4af9 ("sfc: Copy shared files needed for Siena (part 1)") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Cc: Edward Cree <ecree.xilinx@gmail.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20220518065820.131611-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18octeon_ep: Fix irq releasing in the error handling path of octep_request_irqs()Christophe JAILLET
When taken, the error handling path does not undo correctly what has already been allocated. Introduce a new loop index, 'j', in order to simplify the error handling path and rewrite part of it. It is now written with the same logic and intermediate variables used when resources are allocated. This is much more straightforward. Fixes: 37d79d059606 ("octeon_ep: add Tx/Rx processing and interrupt support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18octeon_ep: Fix a memory leak in the error handling path of octep_request_irqs()Christophe JAILLET
'oct->non_ioq_irq_names' is not freed in the error handling path of octep_request_irqs(). Add the missing kfree(). Fixes: 37d79d059606 ("octeon_ep: add Tx/Rx processing and interrupt support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Veerasenareddy Burru <vburru@marvell.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18net: phy: adin: add support for clock outputJosua Mayer
The ADIN1300 supports generating certain clocks on its GP_CLK pin, as well as providing the reference clock on CLK25_REF. Add support for selecting the clock via device-tree properties. Technically the phy also supports a recovered 125MHz clock for synchronous ethernet. SyncE should be configured dynamically at runtime, however Linux does not currently have a toggle for this, so support is explicitly omitted. Co-developed-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Signed-off-by: Josua Mayer<josua@solid-run.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Reduce number of hardware offload retries from flowtable datapath which might hog system with retries, from Felix Fietkau. 2) Skip neighbour lookup for PPPoE device, fill_forward_path() already provides this and set on destination address from fill_forward_path for PPPoE device, also from Felix. 4) When combining PPPoE on top of a VLAN device, set info->outdev to the PPPoE device so software offload works, from Felix. 5) Fix TCP teardown flowtable state, races with conntrack gc might result in resetting the state to ESTABLISHED and the time to one day. Joint work with Oz Shlomo and Sven Auhagen. 6) Call dst_check() from flowtable datapath to check if dst is stale instead of doing it from garbage collector path. 7) Disable register tracking infrastructure, either user-space or kernel need to pre-fetch keys inconditionally, otherwise register tracking assumes data is already available in register that might not well be there, leading to incorrect reductions. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: disable expression reduction infra netfilter: flowtable: move dst_check to packet path netfilter: flowtable: fix TCP flow teardown netfilter: nft_flow_offload: fix offload with pppoe + vlan net: fix dev_fill_forward_path with pppoe + bridge netfilter: nft_flow_offload: skip dst neigh lookup for ppp devices netfilter: flowtable: fix excessive hw offload attempts after failure ==================== Link: https://lore.kernel.org/r/20220518213841.359653-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18drm/msm/dpu: handle pm_runtime_get_sync() errors in bind pathAbhinav Kumar
If there are errors while trying to enable the pm in the bind path, it will lead to unclocked access of hw revision register thereby crashing the device. This will not address why the pm_runtime_get_sync() fails but at the very least we should be able to prevent the crash by handling the error and bailing out earlier. changes in v2: - use pm_runtime_resume_and_get() instead of pm_runtime_get_sync() Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/486721/ Link: https://lore.kernel.org/r/20220518223407.26147-1-quic_abhinavk@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-05-18clk: mediatek: use en_mask as a pure div_en_maskChun-Jie Chen
We no longer allow en_mask to be a combination of pll_en_bit and div_en_mask, so remove pll_en_bit(bit0) from en_mask to make en_mask a pure en_mask that only used for pll dividers. This commit continues the work done in commit 7cc4e1bbe300 ("clk: mediatek: Fix asymmetrical PLL enable and disable control") and commit f384c44754b7 ("clk: mediatek: Add configurable enable control to mtk_pll_data") to clean up en_mask(bit0) default setting. Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Mandy Liu <mandyjh.liu@mediatek.com> Link: https://lore.kernel.org/r/20220513073621.12923-1-mandyjh.liu@mediatek.com Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-18clk: ingenic-tcu: Fix missing TCU clock for X1000 SoCsAidan MacDonald
The TCU clock gate on X1000 wasn't requested by the driver and could be gated automatically later on in boot, which prevents timers from running and breaks PWM. Add a workaround to support old device trees that don't specify the "tcu" clock gate. In this case the kernel will print a warning and attempt to continue without the clock, which is wrong, but it could work if "clk_ignore_unused" is in the kernel arguments. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Link: https://lore.kernel.org/r/20220412122750.279058-3-aidanmacdonald.0x0@gmail.com Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-18clk: mediatek: update compatible string for MT7986 ethsysSam Shih
Update compatible string of mt7986 ethsys clock driver to fit the devicetree bindings document. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Link: https://lore.kernel.org/r/20220509090939.845-2-sam.shih@mediatek.com Fixes: ec97d23c8e22 ("clk: mediatek: add mt7986 clock support") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-18Merge branch 'arm/fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "The SoC bug fixes have calmed down sufficiently, there is one minor update for the MAINTAINERS file, and few bug fixes for dts descriptions: - Updates to the BananaPi R2-Pro (rk3568) dts to match production hardware rather than the prototype version. - Qualcomm sm8250 soundwire gets disabled on some machines to avoid crashes - A number of aspeed SoC specific fixes, addressing incorrect pin cotrol settings, some values in the romed8hm board, and a revert for an accidental removal of a DT node" * 'arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: omap: remove me as a maintainer ARM: dts: aspeed: Add video engine to g6 ARM: dts: aspeed: romed8hm3: Fix GPIOB0 name ARM: dts: aspeed: romed8hm3: Add lm25066 sense resistor values ARM: dts: aspeed-g6: fix SPI1/SPI2 quad pin group ARM: dts: aspeed-g6: add FWQSPI group in pinctrl dtsi dt-bindings: pinctrl: aspeed-g6: add FWQSPI function/group pinctrl: pinctrl-aspeed-g6: add FWQSPI function-group dt-bindings: pinctrl: aspeed-g6: remove FWQSPID group pinctrl: pinctrl-aspeed-g6: remove FWQSPID group in pinctrl ARM: dts: aspeed-g6: remove FWQSPID group in pinctrl dtsi arm64: dts: qcom: sm8250: don't enable rx/tx macro by default arm64: dts: rockchip: Add gmac1 and change network settings of bpi-r2-pro arm64: dts: rockchip: Change io-domains of bpi-r2-pro
2022-05-18Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull misc fixes from Al Viro: "vhost race fix and a percpu_ref_init-caused cgroup double-free fix. The latter had manifested as buggered struct mount refcounting - those are also using percpu data structures, but anything that does percpu allocations could be hit" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Fix double fget() in vhost_net_set_backend() percpu_ref_init(): clean ->percpu_count_ref on failure
2022-05-18Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull mlx5 fix from Michael Tsirkin: "One last minute fixup The patch has been on list for a while but as it was posted as part of a thread it was missed" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa/mlx5: Use consistent RQT size
2022-05-18drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotationsAbhinav Kumar
DRM_MODE_ROTATE_180 was previously marked as supported even for devices not supporting inline rotation. This is true because the SSPPs can always flip the image. After inline rotation support changes, this bit was removed and kms_rotation_crc IGT test starts skipping now whereas it was previously passing. Restore DRM_MODE_ROTATE_180 bit to the supported rotations list. Fixes: dabfdd89eaa92 ("add inline rotation support for sc7280") Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (SC8170) Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/485928/ Link: https://lore.kernel.org/r/20220511222710.22394-1-quic_abhinavk@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-05-18drm/msm: don't free the IRQ if it was not requestedDmitry Baryshkov
As msm_drm_uninit() is called from the msm_drm_init() error path, additional care should be necessary as not to call the free_irq() for the IRQ that was not requested before (because an error occured earlier than the request_irq() call). This fixed the issue reported with the following backtrace: [ 8.571329] Trying to free already-free IRQ 187 [ 8.571339] WARNING: CPU: 0 PID: 76 at kernel/irq/manage.c:1895 free_irq+0x1e0/0x35c [ 8.588746] Modules linked in: pmic_glink pdr_interface fastrpc qrtr_smd snd_soc_hdmi_codec msm fsa4480 gpu_sched drm_dp_aux_bus qrtr i2c_qcom_geni crct10dif_ce qcom_stats qcom_q6v5_pas drm_display_helper gpi qcom_pil_info drm_kms_helper qcom_q6v5 qcom_sysmon qcom_common qcom_glink_smem qcom_rng mdt_loader qmi_helpers phy_qcom_qmp ufs_qcom typec qnoc_sm8350 socinfo rmtfs_mem fuse drm ipv6 [ 8.624154] CPU: 0 PID: 76 Comm: kworker/u16:2 Not tainted 5.18.0-rc5-next-20220506-00033-g6cee8cab6089-dirty #419 [ 8.624161] Hardware name: Qualcomm Technologies, Inc. SM8350 HDK (DT) [ 8.641496] Workqueue: events_unbound deferred_probe_work_func [ 8.647510] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 8.654681] pc : free_irq+0x1e0/0x35c [ 8.658454] lr : free_irq+0x1e0/0x35c [ 8.662228] sp : ffff800008ab3950 [ 8.665642] x29: ffff800008ab3950 x28: 0000000000000000 x27: ffff16350f56a700 [ 8.672994] x26: ffff1635025df080 x25: ffff16350251badc x24: ffff16350251bb90 [ 8.680343] x23: 0000000000000000 x22: 00000000000000bb x21: ffff16350e8f9800 [ 8.687690] x20: ffff16350251ba00 x19: ffff16350cbd5880 x18: ffffffffffffffff [ 8.695039] x17: 0000000000000000 x16: ffffa2dd12179434 x15: ffffa2dd1431d02d [ 8.702391] x14: 0000000000000000 x13: ffffa2dd1431d028 x12: 662d79646165726c [ 8.709740] x11: ffffa2dd13fd2438 x10: 000000000000000a x9 : 00000000000000bb [ 8.717111] x8 : ffffa2dd13fd23f0 x7 : ffff800008ab3750 x6 : 00000000fffff202 [ 8.724487] x5 : ffff16377e870a18 x4 : 00000000fffff202 x3 : ffff735a6ae1b000 [ 8.731851] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff1635015f8000 [ 8.739217] Call trace: [ 8.741755] free_irq+0x1e0/0x35c [ 8.745198] msm_drm_uninit.isra.0+0x14c/0x294 [msm] [ 8.750548] msm_drm_bind+0x28c/0x5d0 [msm] [ 8.755081] try_to_bring_up_aggregate_device+0x164/0x1d0 [ 8.760657] __component_add+0xa0/0x170 [ 8.764626] component_add+0x14/0x20 [ 8.768337] dp_display_probe+0x2a4/0x464 [msm] [ 8.773242] platform_probe+0x68/0xe0 [ 8.777043] really_probe.part.0+0x9c/0x28c [ 8.781368] __driver_probe_device+0x98/0x144 [ 8.785871] driver_probe_device+0x40/0x140 [ 8.790191] __device_attach_driver+0xb4/0x120 [ 8.794788] bus_for_each_drv+0x78/0xd0 [ 8.798751] __device_attach+0xdc/0x184 [ 8.802713] device_initial_probe+0x14/0x20 [ 8.807031] bus_probe_device+0x9c/0xa4 [ 8.810991] deferred_probe_work_func+0x88/0xc0 [ 8.815667] process_one_work+0x1d0/0x320 [ 8.819809] worker_thread+0x14c/0x444 [ 8.823688] kthread+0x10c/0x110 [ 8.827036] ret_from_fork+0x10/0x20 Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: f026e431cf86 ("drm/msm: Convert to Linux IRQ interfaces") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/485422/ Link: https://lore.kernel.org/r/20220507010021.1667700-1-dmitry.baryshkov@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-05-18drm/msm/dpu: limit writeback modes according to max_linewidthAbhinav Kumar
Writeback modes were being added according to mode_config.max_width but this is assigned to double of max_mixer_width. For compositors/clients using a single SSPP, this will fail the dpu_plane's atomic check as it checks for max_linewidth. Limit writeback modes according to max_linewidth to allow even compositors/clients which use only a single SSPP to use writeback. Fixes: 77b001acdcfeb ("drm/msm/dpu: add the writeback connector layer") Reported-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (SC8170) Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/486176/ Link: https://lore.kernel.org/r/20220513225959.19004-1-quic_abhinavk@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
generated by cgit (git 2.34.1) at 2025-09-16 10:18:58 +0000