summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-05-13media: imx-jpeg: Identify and handle precision correctlyMing Qian
The decoder will save the precision that was detected from jpeg header and use it later, when choosing the pixel format and also calculate bytesperline according to precision. The 12bit jpeg is not supported yet, but driver shouldn't led to serious problem if user enqueue a 12 bit jpeg. And the 12bit jpeg is supported by hardware, driver may support it later. [hverkuil: document the new precision field] Signed-off-by: Ming Qian <ming.qian@nxp.com> Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: imx-jpeg: Refactor function mxc_jpeg_parseMing Qian
Refine code to support dynamic resolution change Signed-off-by: Ming Qian <ming.qian@nxp.com> Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: av7110: fix prohibited spaces in switch statementHusni Faiz
This patch fixes "space prohibited before that ':'" checkpatch error in the switch statements. Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Husni Faiz <ahamedhusni73@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: av7110: fix switch indentationHusni Faiz
This patch fixes "switch and case should be at the same indent" checkpatch error. Signed-off-by: Husni Faiz <ahamedhusni73@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: platform: return early if the iface is not handledTom Rix
Clang static analysis reports this issue ispcsiphy.c:63:14: warning: The left operand of '<<' is a garbage value reg |= mode << shift; ~~~~ ^ The iface switch-statement default case falls through to ISP_INTERFACE_CCP2B_PHY1. Which is later checked to set the mode. Since the default case is left out of this check mode is never set. Instead of falling through and assuming a ISP_INTERFACE_CCP2B_PHY1 iface, return. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: exynos4-is: Change clk_disable to clk_disable_unprepareMiaoqian Lin
The corresponding API for clk_prepare_enable is clk_disable_unprepare, other than clk_disable. Fix this by changing clk_disable to clk_disable_unprepare. Fixes: b4155d7d5b2c ("[media] exynos4-is: Ensure fimc-is clocks are not enabled until properly configured") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: platform: renesas-ceu: Fix unused variable warningLaurent Pinchart
The ceu_data_rz variable is unused when CONFIG_OF isn't set. This generates a compiler warning. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: davinci: remove unnecessary NULL checkDan Carpenter
We verified that "vpif_obj.sd[i]" is non-NULL on the previous line so no need to check here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: bdisp: remove unnecessary IS_ERR() checkDan Carpenter
The "bdisp->clock" variable cannot be an error pointer here. No need to check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: platform: Remove unused including <linux/version.h>Jiapeng Chong
Eliminate the follow versioncheck warning: ./drivers/media/platform/stm/sti/c8sectpfe/c8sectpfe-common.h: 16 linux/version.h not needed. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: i2c: rdacm20: Fix format definitionJacopo Mondi
The RDACM20 camera supports a single image format which is currently listed as MEDIA_BUS_FMT_UYVY8_2X8. As the video stream is transmitted on the GMSL serial bus, the 2X8 variant does not apply. Fix the format by using MEDIA_BUS_FMT_UYVY8_1X16. This fixes a runtime error which is now triggered as the MAX9286 deserializer implements .link_validate(). Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: rcar-vin: Add check that input interface and format are validNiklas Söderlund
Add a check to make sure the input interface (CSI-2 or parallel) allow for the requested input bus format. If not inform the user and error out rather then try to continue with incorrect settings. While at it add the missing define for RGB666 that is not yet supported in the driver but we can preemptively check for it in this context already. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: v4l2: mem2mem: Fix typos in v4l2_m2m_dev documentationLaurent Pinchart
The v4l2_m2m_dev structure documentation incorrectly references the v4l2_m2m_unregister_media_controller() function when it actually means v4l2_m2m_register_media_controller(). Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: cec: seco: remove byte handling from smb_word_opTom Rix
smb_word_op() has a parameter data_format that determines if the data is either a byte or word. From inspection, smb_word_op() is only used by the macros smb_wr16() and smb_rd16() both pass in CMD_WORD_DATA. There is no use of smb_word_op() that passes in CMD_BYTE_DATA. So remove the byte handling. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: i2c: rdacm2x: properly set subdev entity functionLaurentiu Palcu
The subdevice entity function was left unset, which produces a warning when probing the device: mxc-md bus@58000000:camera: Entity type for entity rdacm20 19-0051 was not initialized! This patch will set entity function to MEDIA_ENT_F_CAM_SENSOR and leave flags unset. Fixes: 34009bffc1c6 ("media: i2c: Add RDACM20 driver") Fixes: a59f853b3b4b ("media: i2c: Add driver for RDACM21 camera module") Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: imx-jpeg: Fix potential array out of bounds in queue_setupMirela Rabulea
Fix smatch warning in mxc_jpeg_queue_setup, check *nplanes against current format: drivers/media/platform/imx-jpeg/mxc-jpeg.c:1070 mxc_jpeg_queue_setup() warn: potential user controlled iterator 'i' (array size 2 vs 7) Signed-off-by: Mirela Rabulea <mirela.rabulea@oss.nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: gspca: make the read-only array table static constColin Ian King
Don't populate the read-only array table on the stack but instead make it static const. Also makes the object code a little smaller. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: atmel: atmel-isc: Fix PM disable depth imbalance in atmel_isc_probeMiaoqian Lin
The pm_runtime_enable will decrease power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). Fixes: 0a0e265515db ("media: atmel: atmel-isc: split driver into driver base and isc") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: st-delta: Fix PM disable depth imbalance in delta_probeMiaoqian Lin
The pm_runtime_enable will decrease power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). Fixes: f386509e4959 ("[media] st-delta: STiH4xx multi-format video decoder v4l2 driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Acked-by: Hugues Fruchet <hugues.fruchet@foss.st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13extcon: Modify extcon device to be created after driver data is setbumwoo lee
Currently, someone can invoke the sysfs such as state_show() intermittently before dev_set_drvdata() is done. And it can be a cause of kernel Oops because of edev is Null at that time. So modified the driver registration to after setting drviver data. - Oops's backtrace. Backtrace: [<c067865c>] (state_show) from [<c05222e8>] (dev_attr_show) [<c05222c0>] (dev_attr_show) from [<c02c66e0>] (sysfs_kf_seq_show) [<c02c6648>] (sysfs_kf_seq_show) from [<c02c496c>] (kernfs_seq_show) [<c02c4938>] (kernfs_seq_show) from [<c025e2a0>] (seq_read) [<c025e11c>] (seq_read) from [<c02c50a0>] (kernfs_fop_read) [<c02c5064>] (kernfs_fop_read) from [<c0231cac>] (__vfs_read) [<c0231c5c>] (__vfs_read) from [<c0231ee0>] (vfs_read) [<c0231e34>] (vfs_read) from [<c0232464>] (ksys_read) [<c02323f0>] (ksys_read) from [<c02324fc>] (sys_read) [<c02324e4>] (sys_read) from [<c00091d0>] (__sys_trace_return) Signed-off-by: bumwoo lee <bw365.lee@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-05-13extcon: sm5502: Clarify SM5703's i2c device IDMarkuss Broks
While SM5502 and SM5504 are purely micro USB switching circuits, SM5703 is a multi-function device which has multiple modules in it. Change the i2c_device_id of it to avoid conflict with MFD driver. Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-05-13extcon: ptn5150: Add usb role class supportLi Jun
Some usb controller drivers may not support extcon but use usb role class as it's the preferred approach, so to support usb dual role switch with usb role class, add usb role class consumer support. Signed-off-by: Li Jun <jun.li@nxp.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-05-13extcon: ptn5150: Add queue work sync before driver releaseLi Jun
Add device managed action to sync pending queue work, otherwise the queued work may run after the work is destroyed. Fixes: 4ed754de2d66 ("extcon: Add support for ptn5150 extcon driver") Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-05-13extcon: sm5502: Add support for SM5703Markuss Broks
SM5703 is another MFD from Silicon Mitus which has a very similar MUIC unit to the one in SM5502. The only difference I've noticed is slightly different configuration only enables the interrupts which are exactly the same as on SM5502. If we make use of different interrupts in the future, this can be improved by having a separate struct for SM5703, but the main functionality (detecting cable or OTG adapter) is working properly. Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-05-13extcon: usb-gpio: Remove disable irq operation in system sleepBruce Chen
If disable vbus/id irq, it will lead to wakeup system fail in unisoc platform. In unisoc platform, Irq enable and irq wakeup are the same interrupt line. So remove disable vbus/id irq operation is a way to solve the issue. Signed-off-by: Bruce Chen <bruce.chen@unisoc.com> Acked-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-05-13extcon: Fix some kernel-doc commentsYang Li
Add the description of @id in extcon_sync() kernel-doc comment and @edev, @id, @prop in extcon_set_property_sync() kernel-doc comment to remove warnings found by running scripts/kernel-doc, which is caused by using 'make W=1'. drivers/extcon/extcon.c:409: warning: Function parameter or member 'id' not described in 'extcon_sync' drivers/extcon/extcon.c:750: warning: Function parameter or member 'edev' not described in 'extcon_set_property_sync' drivers/extcon/extcon.c:750: warning: Function parameter or member 'id' not described in 'extcon_set_property_sync' drivers/extcon/extcon.c:750: warning: Function parameter or member 'prop' not described in 'extcon_set_property_sync' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-05-13extcon: usbc-cros-ec: Use struct_size() helper in kzalloc()Gustavo A. R. Silva
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-05-13extcon: int3496: Add support for controlling Vbus through a regulatorHans de Goede
On some boards the 5V vboost-regulator for powering devices connected to the micro USB connector is not controlled through a GPIO. This happens for example when the 5V vboost-regulator is integrated into the charger IC and controlled over I2C. Add support for controlling the 5V vboost-regulator through the regulator framework for such boards. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-05-13extcon: int3496: Add support for binding to plain platform devicesHans de Goede
On some X86 Android tablets the DSTD lack the INT3496 ACPI device, while also not handling micro USB port ID pin events inside the DSDT (instead the forked factory image kernel has things hardcoded). The new drivers/platform/x86/x86-android-tablets.c module manually instantiates an intel-int3496 device for these tablets. Add support to the extcon-intel-int3496 driver to bind to devices without an ACPI companion and export a normal platform_device modalias for automatic module loading. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-05-13extcon: int3496: Request non-exclusive access to the ID GPIOHans de Goede
Some DSDTs are buggy and do a read from the ID pin during the ACPI initialization, causing the pin to be marked as owned by: "ACPI:OpRegion" and causing gpiod_get() to fail with -EBUSY. Pass the GPIOD_FLAGS_BIT_NONEXCLUSIVE flag to the gpiod_get() call to work around this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-05-13extcon: int3496: Make the driver a bit less verboseHans de Goede
On all devices which I have with an INT3496 ACPI device, there is only an ID pin defined. Change the log-messages about not being able to get GPIOs for "VBUS EN" and "USB MUX" to use dev_dbg(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-05-13extcon: Fix extcon_get_extcon_dev() error handlingDan Carpenter
The extcon_get_extcon_dev() function returns error pointers on error, NULL when it's a -EPROBE_DEFER defer situation, and ERR_PTR(-ENODEV) when the CONFIG_EXTCON option is disabled. This is very complicated for the callers to handle and a number of them had bugs that would lead to an Oops. In real life, there are two things which prevented crashes. First, error pointers would only be returned if there was bug in the caller where they passed a NULL "extcon_name" and none of them do that. Second, only two out of the eight drivers will build when CONFIG_EXTCON is disabled. The normal way to write this would be to return -EPROBE_DEFER directly when appropriate and return NULL when CONFIG_EXTCON is disabled. Then the error handling is simple and just looks like: dev->edev = extcon_get_extcon_dev(acpi_dev_name(adev)); if (IS_ERR(dev->edev)) return PTR_ERR(dev->edev); For the two drivers which can build with CONFIG_EXTCON disabled, then extcon_get_extcon_dev() will now return NULL which is not treated as an error and the probe will continue successfully. Those two drivers are "typec_fusb302" and "max8997-battery". In the original code, the typec_fusb302 driver had an 800ms hang in tcpm_get_current_limit() but now that function is a no-op. For the max8997-battery driver everything should continue working as is. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-05-13mt76: mt7921: add ipv6 NS offload supportDeren Wu
Add ipv6 NS offload for WoWLAN state. Tested in this way: 1. Put device-A into WoW state. 2. ping6 from device-B to device-A. 3. In sniffer, see Neighbour advertisement from device-A. Reviewed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: add gfp to mt76_mcu_msg_alloc signatureLorenzo Bianconi
Introduce __mt76_mcu_msg_alloc utility routine in order to specify gfp flags for mcu message allocation. Acked-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: add more statistics from fw_util debugfs knobsRyder Lee
Print out exception state and program counters of WA/WM MCUs. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: improve error handling for fw_debug knobsRyder Lee
In case fw.debug_wm/wa might be unavailable. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7615/mt7915: do reset_work with mt76's work queueBo Jiao
reset_work may be blocked when mcu message timeout occurs Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: add support for 6G in-band discoveryMeiChia Chiu
Add offloading FILS discovery and unsolicited broadcast probe response support. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: add Wireless Ethernet Dispatch supportFelix Fietkau
This is used to support hardware flow offloading from Ethernet to WLAN Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: make number of tokens configurable dynamicallyFelix Fietkau
Preparation for adding Wireless Ethernet Dispatch support Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: add support for overriding the device used for DMA mappingFelix Fietkau
WED support requires using non-coherent DMA, whereas the PCI device might be configured for coherent DMA. The WED driver will take care of changing the PCI HIF coherent IO setting on attach. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: dma: add wrapper macro for accessing queue registersFelix Fietkau
Preparation for adding indirection used for Wireless Ethernet Dispatch support Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: move MT_INT_MASK_CSR to init.cRyder Lee
To avoid redundant MT_INT_MASK_CSR settings. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: introduce mt7915_mac_severe_check()Ryder Lee
In rare cases, TRB pointers might be out of sync leads to RMAC stopping Rx that requires minimal recovery, so add this helper to periodically check TRB status. Tested-by: Chad Monroe <chad.monroe@smartrg.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: rework SER debugfs knobRyder Lee
1. get status of system recovery from firmware. 2. add more recovery points. 3. make knob per phy. Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: limit minimum twt durationPeter Chiu
The minimum twt duration supported by mt7915 is 64 according to hardware design. Reply station with TWT_SETUP_CMD_DICTATE if min_twt_dur smaller than 64. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: reject duplicated twt flowsPeter Chiu
Reject twt flows with the same parameters to prevent some potential issues causing by duplicated establishment. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: fix twt table_mask to u16 in mt7915_devPeter Chiu
mt7915 can support 16 twt stations so modify table_mask to u16. Fixes: 3782b69d03e7 ("mt76: mt7915: introduce mt7915_mac_add_twt_setup routine") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: update mt7986 patch in mt7986_wmac_adie_patch_7976()Peter Chiu
Update mt7976 adie patch for different adie version. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: connac: use skb_put_data instead of open codingSean Wang
use skb_put_data instead of open coding in mt76_connac_mcu_update_arp_filter. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-09-19 05:34:35 +0000