summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-10-28ubi: fastmap: Fix add_vol() return value test in ubi_attach_fastmap()Boris Brezillon
Commit e96a8a3bb671 ("UBI: Fastmap: Do not add vol if it already exists") introduced a bug by changing the possible error codes returned by add_vol(): - this function no longer returns NULL in case of allocation failure but return ERR_PTR(-ENOMEM) - when a duplicate entry in the volume RB tree is found it returns ERR_PTR(-EEXIST) instead of ERR_PTR(-EINVAL) Fix the tests done on add_vol() return val to match this new behavior. Fixes: e96a8a3bb671 ("UBI: Fastmap: Do not add vol if it already exists") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-28VMCI: Doorbell create and destroy fixesJorgen Hansen
This change consists of two changes: 1) If vmci_doorbell_create is called when neither guest nor host personality as been initialized, vmci_get_context_id will return VMCI_INVALID_ID. In that case, we should fail the create call. 2) In doorbell destroy, we assume that vmci_guest_code_active() has the same return value on create and destroy. That may not be the case, so we may end up with the wrong refcount. Instead, destroy should check explicitly whether the doorbell is in the index table as an indicator of whether the guest code was active at create time. Reviewed-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28GenWQE: Fix bad page access during abort of resource allocationGerald Schaefer
When interrupting an application which was allocating DMAable memory, it was possible, that the DMA memory was deallocated twice, leading to the error symptoms below. Thanks to Gerald, who analyzed the problem and provided this patch. I agree with his analysis of the problem: ddcb_cmd_fixups() -> genwqe_alloc_sync_sgl() (fails in f/lpage, but sgl->sgl != NULL and f/lpage maybe also != NULL) -> ddcb_cmd_cleanup() -> genwqe_free_sync_sgl() (double free, because sgl->sgl != NULL and f/lpage maybe also != NULL) In this scenario we would have exactly the kind of double free that would explain the WARNING / Bad page state, and as expected it is caused by broken error handling (cleanup). Using the Ubuntu git source, tag Ubuntu-4.4.0-33.52, he was able to reproduce the "Bad page state" issue, and with the patch on top he could not reproduce it any more. ------------[ cut here ]------------ WARNING: at /build/linux-o03cxz/linux-4.4.0/arch/s390/include/asm/pci_dma.h:141 Modules linked in: qeth_l2 ghash_s390 prng aes_s390 des_s390 des_generic sha512_s390 sha256_s390 sha1_s390 sha_common genwqe_card qeth crc_itu_t qdio ccwgroup vmur dm_multipath dasd_eckd_mod dasd_mod CPU: 2 PID: 3293 Comm: genwqe_gunzip Not tainted 4.4.0-33-generic #52-Ubuntu task: 0000000032c7e270 ti: 00000000324e4000 task.ti: 00000000324e4000 Krnl PSW : 0404c00180000000 0000000000156346 (dma_update_cpu_trans+0x9e/0xa8) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 Krnl GPRS: 00000000324e7bcd 0000000000c3c34a 0000000027628298 000000003215b400 0000000000000400 0000000000001fff 0000000000000400 0000000116853000 07000000324e7b1e 0000000000000001 0000000000000001 0000000000000001 0000000000001000 0000000116854000 0000000000156402 00000000324e7a38 Krnl Code: 000000000015633a: 95001000 cli 0(%r1),0 000000000015633e: a774ffc3 brc 7,1562c4 #0000000000156342: a7f40001 brc 15,156344 >0000000000156346: 92011000 mvi 0(%r1),1 000000000015634a: a7f4ffbd brc 15,1562c4 000000000015634e: 0707 bcr 0,%r7 0000000000156350: c00400000000 brcl 0,156350 0000000000156356: eb7ff0500024 stmg %r7,%r15,80(%r15) Call Trace: ([<00000000001563e0>] dma_update_trans+0x90/0x228) [<00000000001565dc>] s390_dma_unmap_pages+0x64/0x160 [<00000000001567c2>] s390_dma_free+0x62/0x98 [<000003ff801310ce>] __genwqe_free_consistent+0x56/0x70 [genwqe_card] [<000003ff801316d0>] genwqe_free_sync_sgl+0xf8/0x160 [genwqe_card] [<000003ff8012bd6e>] ddcb_cmd_cleanup+0x86/0xa8 [genwqe_card] [<000003ff8012c1c0>] do_execute_ddcb+0x110/0x348 [genwqe_card] [<000003ff8012c914>] genwqe_ioctl+0x51c/0xc20 [genwqe_card] [<000000000032513a>] do_vfs_ioctl+0x3b2/0x518 [<0000000000325344>] SyS_ioctl+0xa4/0xb8 [<00000000007b86c6>] system_call+0xd6/0x264 [<000003ff9e8e520a>] 0x3ff9e8e520a Last Breaking-Event-Address: [<0000000000156342>] dma_update_cpu_trans+0x9a/0xa8 ---[ end trace 35996336235145c8 ]--- BUG: Bad page state in process jbd2/dasdb1-8 pfn:3215b page:000003d100c856c0 count:-1 mapcount:0 mapping: (null) index:0x0 flags: 0x3fffc0000000000() page dumped because: nonzero _count Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28vme: vme_get_size potentially returning incorrect value on failureMartyn Welch
The function vme_get_size returns the size of the window to the caller, however it doesn't check the return value of the call to vme_master_get. Return 0 on failure rather than anything else. Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28drm/i915: Fix SKL+ 90/270 degree rotated plane coordinate computationVille Syrjälä
Pass the framebuffer size in .16 fixed point coordinates to drm_rect_rotate() since that's what the source coordinates are as well at this stage. We used to do this part of the computation in integer coordinates, but that got changed when moving the computation to happen in the check phase of the operation. Unfortunately I forgot to shift up the fb width and height appropriately. With the bogus size we ended up with some negative fb offset, which when added to the vma offset caused out scanout to start at an offset earlier than we inteded. Eg. when testing on my SKL I saw a row of incorrect tiles at the top of my screen. Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Cc: drm-intel-fixes@lists.freedesktop.org Fixes: b63a16f6cd89 ("drm/i915: Compute display surface offset in the plane check hook for SKL+") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477325584-23679-1-git-send-email-ville.syrjala@linux.intel.com Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit da064b47c0b8d0dff1905b38c76e7e51fb5a9547) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-10-28drm/i915: Remove two invalid warnsTvrtko Ursulin
Objects can have multiple VMAs used for display in which case assertion that objects must not be pinned for display more times than the current VMA is incorrect. v2: Commit message update. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 058d88c4330f ("drm/i915: Track pinned VMA") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1477413635-3876-1-git-send-email-tvrtko.ursulin@linux.intel.com (cherry picked from commit 3299e7e43484a85eeb5c7ec09958bff05c9d0543) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-10-28drm/i915: Rotated view does not need a fenceTvrtko Ursulin
We do not need to set up a fence for the rotated view. Display does not need it and no one can access it. v2: Move code to __i915_vma_set_map_and_fenceable. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 05a20d098db1 ("drm/i915: Move map-and-fenceable tracking to the VMA") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 07ee2bce6a516e0218dba22581803cb8f11bcf82) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-10-28drm/i915/fbc: fix CFB size calculation for gen8+Paulo Zanoni
Broadwell and newer actually compress up to 2560 lines instead of 2048 (as documented in the FBC_CTL page). If we don't take this into consideration we end up reserving too little stolen memory for the CFB, so we may allocate something else (such as a ring) right after what we reserved, and the hardware will overwrite it with the contents of the CFB when FBC is active, causing GPU hangs. Another possibility is that the CFB may be allocated at the very end of the available space, so the CFB will overlap the reserved stolen area, leading to FIFO underruns. This bug has always been a problem on BDW (the only affected platform where FBC is enabled by default), but it's much easier to reproduce since the following commit: commit c58b735fc762e891481e92af7124b85cb0a51fce Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Aug 18 17:16:57 2016 +0100 drm/i915: Allocate rings from stolen Of course, you can only reproduce the bug if your screen is taller than 2048 lines. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98213 Fixes: a98ee79317b4 ("drm/i915/fbc: enable FBC by default on HSW and BDW") Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477065346-13736-1-git-send-email-paulo.r.zanoni@intel.com (cherry picked from commit 79f2624b1b9f776b173b41d743fb3dd7374b3827) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-10-28drm: i915: Wait for fences on new fb, not oldDaniel Stone
The previous code would wait for fences on the framebuffer from the old plane state to complete, rather than the new, so you would see tearing everywhere. Fix this to wait on the new state before we make it active. Signed-off-by: Daniel Stone <daniels@collabora.com> Fixes: 94f050246b42 ("drm/i915: nonblocking commit") Cc: stable@vger.kernel.org Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161021144454.6288-1-daniels@collabora.com (cherry picked from commit 2d2c5ad83f772d7d7b0bb8348ecea42e88f89ab0) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-10-28drm/i915: Clean up DDI DDC/AUX CH sanitationVille Syrjälä
Now that we use the AUX and GMBUS assignment from VBT for all ports, let's clean up the sanitization of the port information a bit. Previosuly we only did this for port E, and only complained about a non-standard assignment for the other ports. But as we know that non-standard assignments are a fact of life, let's expand the sanitization to all the ports. v2: Include a commit message, fix up the comments a bit v3: Don't clobber other ports if the current port has no alternate aux ch/ddc pin Cc: stable@vger.kernel.org Cc: Maarten Maathuis <madman2003@gmail.com> Tested-by: Maarten Maathuis <madman2003@gmail.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=97877 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-4-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jim Bride <jim.bride@linux.intel.com> (v2) (cherry picked from commit 9454fa871edf15c20a0371548b3ec0d6d944a498) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-10-28drm/i915: Respect alternate_aux_channel for all DDI portsVille Syrjälä
The VBT provides the platform a way to mix and match the DDI ports vs. AUX channels. Currently we only trust the VBT for DDI E, which has no corresponding AUX channel of its own. However it is possible that some board might use some non-standard DDI vs. AUX port routing even for the other ports. Perhaps for signal routing reasons or something, So let's generalize this and trust the VBT for all ports. For now we'll limit this to DDI platforms, as we trust the VBT a bit more there anyway when it comes to the DDI ports. I've structured the code in a way that would allow us to easily expand this to other platforms as well, by simply filling in the ddi_port_info. v2: Drop whitespace changes, keep MISSING_CASE() for unknown aux ch assignment, include a commit message, include debug message during init Cc: stable@vger.kernel.org Cc: Maarten Maathuis <madman2003@gmail.com> Tested-by: Maarten Maathuis <madman2003@gmail.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=97877 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-2-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jim Bride <jim.bride@linux.intel.com> (cherry picked from commit 8f7ce038f1178057733b7e765bf9160a2f9be14b) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-10-28drm/i915/gen9: fix watermarks when using the pipe scalerPaulo Zanoni
Luckily, the necessary adjustments for when we're using the scaler are exactly the same as the ones needed on ILK+, so just reuse the function we already have. v2: Invert the patch order so stable backports get easier. Cc: stable@vger.kernel.org Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1475872138-16194-1-git-send-email-paulo.r.zanoni@intel.com (cherry picked from commit cfd7e3a20251b9ac95651d64556f87f86128a966) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-10-28drm/i915: Fix mismatched INIT power domain disabling during suspendImre Deak
Currently the display INIT power domain disabling/enabling happens in a mismatched way in the suspend/resume_early hooks respectively. This can leave display power wells incorrectly disabled in the resume hook if the suspend sequence is aborted for some reason resulting in the suspend/resume hooks getting called but the suspend_late/resume_early hooks being skipped. In particular this change fixes "Unclaimed read from register 0x1e1204" on BYT/BSW triggered from i915_drm_resume()-> intel_pps_unlock_regs_wa() when suspending with /sys/power/pm_test set to devices. Fixes: 85e90679335f ("drm/i915: disable power wells on suspend") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: David Weinehall <david.weinehall@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476358446-11621-1-git-send-email-imre.deak@intel.com (cherry picked from commit 4c494a5769cd0de92638b25960ba0158c36088a6) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-10-28drm/i915: fix a read size argumentDan Carpenter
We want to read 3 bytes here, but because the parenthesis are in the wrong place we instead read: sizeof(intel_dp->edp_dpcd) == sizeof(intel_dp->edp_dpcd) which is one byte. Fixes: fe5a66f91c88 ("drm/i915: Read PSR caps/intermediate freqs/etc. only once on eDP") Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: <drm-intel-fixes@lists.freedesktop.org> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161013085508.GJ16198@mwanda (cherry picked from commit f7170e2eb8f6bf7ef2032cc0659cd38740bf5b97) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-10-28drm/i915: Use fence_write() from rpm resumeChris Wilson
During rpm resume we restore the fences, but we do not have the protection of struct_mutex. This rules out updating the activity tracking on the fences, and requires us to rely on the rpm as the serialisation barrier instead. [ 350.298052] [drm:intel_runtime_resume [i915]] Resuming device [ 350.308606] [ 350.310520] =============================== [ 350.315560] [ INFO: suspicious RCU usage. ] [ 350.320554] 4.8.0-rc8-bsw-rapl+ #3133 Tainted: G U W [ 350.327208] ------------------------------- [ 350.331977] ../drivers/gpu/drm/i915/i915_gem_request.h:371 suspicious rcu_dereference_protected() usage! [ 350.342619] [ 350.342619] other info that might help us debug this: [ 350.342619] [ 350.351593] [ 350.351593] rcu_scheduler_active = 1, debug_locks = 0 [ 350.358952] 3 locks held by Xorg/320: [ 350.363077] #0: (&dev->mode_config.mutex){+.+.+.}, at: [<ffffffffa030589c>] drm_modeset_lock_all+0x3c/0xd0 [drm] [ 350.375162] #1: (crtc_ww_class_acquire){+.+.+.}, at: [<ffffffffa03058a6>] drm_modeset_lock_all+0x46/0xd0 [drm] [ 350.387022] #2: (crtc_ww_class_mutex){+.+.+.}, at: [<ffffffffa0305056>] drm_modeset_lock+0x36/0x110 [drm] [ 350.398236] [ 350.398236] stack backtrace: [ 350.403196] CPU: 1 PID: 320 Comm: Xorg Tainted: G U W 4.8.0-rc8-bsw-rapl+ #3133 [ 350.412457] Hardware name: Intel Corporation CHERRYVIEW C0 PLATFORM/Braswell CRB, BIOS BRAS.X64.X088.R00.1510270350 10/27/2015 [ 350.425212] 0000000000000000 ffff8801680a78c8 ffffffff81332187 ffff88016c5c5000 [ 350.433611] 0000000000000001 ffff8801680a78f8 ffffffff810ca6da ffff88016cc8b0f0 [ 350.442012] ffff88016cc80000 ffff88016cc80000 ffff880177ad0000 ffff8801680a7948 [ 350.450409] Call Trace: [ 350.453165] [<ffffffff81332187>] dump_stack+0x67/0x90 [ 350.458931] [<ffffffff810ca6da>] lockdep_rcu_suspicious+0xea/0x120 [ 350.466002] [<ffffffffa039e8dd>] fence_update+0xbd/0x670 [i915] [ 350.472766] [<ffffffffa039efe2>] i915_gem_restore_fences+0x52/0x70 [i915] [ 350.480496] [<ffffffffa0368f42>] vlv_resume_prepare+0x72/0x570 [i915] [ 350.487839] [<ffffffffa0369802>] intel_runtime_resume+0x102/0x210 [i915] [ 350.495442] [<ffffffff8137f26f>] pci_pm_runtime_resume+0x7f/0xb0 [ 350.502274] [<ffffffff8137f1f0>] ? pci_restore_standard_config+0x40/0x40 [ 350.509883] [<ffffffff814401c5>] __rpm_callback+0x35/0x70 [ 350.516037] [<ffffffff8137f1f0>] ? pci_restore_standard_config+0x40/0x40 [ 350.523646] [<ffffffff81440224>] rpm_callback+0x24/0x80 [ 350.529604] [<ffffffff8137f1f0>] ? pci_restore_standard_config+0x40/0x40 [ 350.537212] [<ffffffff814417bd>] rpm_resume+0x4ad/0x740 [ 350.543161] [<ffffffff81441aa1>] __pm_runtime_resume+0x51/0x80 [ 350.549824] [<ffffffffa03889c8>] intel_runtime_pm_get+0x28/0x90 [i915] [ 350.557265] [<ffffffffa0388a53>] intel_display_power_get+0x23/0x50 [i915] [ 350.565001] [<ffffffffa03ef23d>] intel_atomic_commit_tail+0xdfd/0x10b0 [i915] [ 350.573106] [<ffffffffa034b2e9>] ? drm_atomic_helper_swap_state+0x159/0x300 [drm_kms_helper] [ 350.582659] [<ffffffff81615091>] ? _raw_spin_unlock+0x31/0x50 [ 350.589205] [<ffffffffa034b2e9>] ? drm_atomic_helper_swap_state+0x159/0x300 [drm_kms_helper] [ 350.598787] [<ffffffffa03ef8a5>] intel_atomic_commit+0x3b5/0x500 [i915] [ 350.606319] [<ffffffffa03061dc>] ? drm_atomic_set_crtc_for_connector+0xcc/0x100 [drm] [ 350.615209] [<ffffffffa0306b49>] drm_atomic_commit+0x49/0x50 [drm] [ 350.622242] [<ffffffffa034dee8>] drm_atomic_helper_set_config+0x88/0xc0 [drm_kms_helper] [ 350.631419] [<ffffffffa02f94ac>] drm_mode_set_config_internal+0x6c/0x120 [drm] [ 350.639623] [<ffffffffa02fa94c>] drm_mode_setcrtc+0x22c/0x4d0 [drm] [ 350.646760] [<ffffffffa02f0f19>] drm_ioctl+0x209/0x460 [drm] [ 350.653217] [<ffffffffa02fa720>] ? drm_mode_getcrtc+0x150/0x150 [drm] [ 350.660536] [<ffffffff810c984a>] ? __lock_is_held+0x4a/0x70 [ 350.666885] [<ffffffff81202303>] do_vfs_ioctl+0x93/0x6b0 [ 350.672939] [<ffffffff8120f843>] ? __fget+0x113/0x200 [ 350.678797] [<ffffffff8120f735>] ? __fget+0x5/0x200 [ 350.684361] [<ffffffff81202964>] SyS_ioctl+0x44/0x80 [ 350.690030] [<ffffffff81001deb>] do_syscall_64+0x5b/0x120 [ 350.696184] [<ffffffff81615ada>] entry_SYSCALL64_slow_path+0x25/0x25 Note we also have to remember the lesson from commit 4fc788f5ee3d ("drm/i915: Flush delayed fence releases after reset") where we have to flush any changes to the fence on restore. v2: Replace call to release user mmaps with an assertion that they have already been zapped. Fixes: 49ef5294cda2 ("drm/i915: Move fence tracking from object to vma") Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161012114827.17031-1-chris@chris-wilson.co.uk (cherry picked from commit 4676dc838b37ed8c6f3da4571cb4a04cbd604801) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-10-28drm/i915/gen9: fix DDB partitioning for multi-screen casesPaulo Zanoni
With the previous code we were only recomputing the DDB partitioning for the CRTCs included in the atomic commit, so any other active CRTCs would end up having their DDB registers zeroed. In this patch we make sure that the computed state starts as a copy of the current partitioning, and then we only zero the DDBs that we're actually going to recompute. How to reproduce the bug: 1 - Enable the primary plane on pipe A 2 - Enable the primary plane on pipe B 3 - Enable the cursor or sprite plane on pipe A Step 3 will zero the DDB partitioning for pipe B since it's not included in the commit that enabled the cursor or sprite for pipe A. I expect this to fix many FIFO underrun problems on gen9+. v2: - Mention the cursor on the steps to reproduce the problem (Paulo). - Add Testcase tag provided by Maarten (Maarten). Testcase: kms_cursor_legacy.cursorA-vs-flipB-atomic-transitions Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96226 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96828 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97450 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97596 Bugzilla: https://www.phoronix.com/scan.php?page=news_item&px=Intel-Skylake-Multi-Screen-Woes Cc: stable@vger.kernel.org Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Lyude <cpaul@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/1475602652-17326-1-git-send-email-paulo.r.zanoni@intel.com (cherry picked from commit 5a920b85f2c6e3fd7d9dd9bb3f3345e9085e2360) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-10-28drm/i915: workaround sparse warning on variable length arraysJani Nikula
Fix sparse warning: drivers/gpu/drm/i915/intel_device_info.c:195:31: warning: Variable length array is used. In truth the array does have constant length, but sparse is too dumb to realize. This is a bit ugly, but silence the warning no matter what. Fixes: 91bedd34abf0 ("drm/i915/bdw: Check for slice, subslice and EU count for BDW") Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1475574853-4178-1-git-send-email-jani.nikula@intel.com (cherry picked from commit ff64aa1e630087381511c4d25de0657824f40efa) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-10-28drm/i915: keep declarations in i915_drv.hJani Nikula
Fix sparse warnings: drivers/gpu/drm/i915/i915_drv.c:1179:5: warning: symbol 'i915_driver_load' was not declared. Should it be static? drivers/gpu/drm/i915/i915_drv.c:1267:6: warning: symbol 'i915_driver_unload' was not declared. Should it be static? drivers/gpu/drm/i915/i915_drv.c:2444:25: warning: symbol 'i915_pm_ops' was not declared. Should it be static? Fixes: 42f5551d2769 ("drm/i915: Split out the PCI driver interface to i915_pci.c") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1473946137-1931-3-git-send-email-jani.nikula@intel.com (cherry picked from commit efab0698f94dd71fac5d946ad664a280441daedb) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-10-28tty: serial_core: fix NULL struct tty pointer access in uart_write_wakeupRob Herring
Since commit 761ed4a94582ab29 ("tty: serial_core: convert uart_close to use tty_port_close"), the serial console is broken on various systems and typing "reboot" splats the following on the serial console: INIT: Sending p[ 427.863916] BUG: unable to handle kernel NULL pointer dereference at 00000000000001e0 [ 427.885156] IP: [] tty_wakeup+0xc/0x70 [ 427.898337] PGD 0 [ 427.902051] [ 427.907498] Oops: 0000 [#1] PREEMPT SMP [ 427.917635] Modules linked in: nfsv3 nfs_acl nfs fscache lockd sunrpc grace edd af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave fuse loop md_mod dm_mod joydev hid_generic usbhid ipmi_ssif ohci_pci ohci_hcd ehci_pci ehci_hcd e1000e ptp firewire_ohci edac_core pps_core tpm_infineon sp5100_tco firewire_core acpi_cpufreq serio_raw pcspkr fjes usbcore shpchp edac_mce_amd tpm_tis ipmi_si tpm_tis_core i2c_piix4 k10temp sg ipmi_msghandler tpm sr_mod button cdrom kvm_amd kvm irqbypass crc_itu_t ast ttm drm_kms_helper drm fb_sys_fops sysimgblt sysfillrect syscopyarea i2c_algo_bit scsi_dh_rdac scsi_dh_alua scsi_dh_emc scsi_dh_hp_sw ata_generic pata_atiixp [ 428.054179] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.0-rc1-1.g73e3f23-default #1 [ 428.072868] Hardware name: System manufacturer System Product Name/KGP(M)E-D16, BIOS 0902 12/03/2010 [ 428.094755] task: ffffffffa2c0d500 task.stack: ffffffffa2c00000 [ 428.109717] RIP: 0010:[] [] tty_wakeup+0xc/0x70 [ 428.128407] RSP: 0018:ffff9a1a5fc03df8 EFLAGS: 00010086 [ 428.142184] RAX: ffff9a1857258000 RBX: ffffffffa3050ea0 RCX: 0000000000000000 [ 428.159649] RDX: 000000000000001b RSI: 0000000000000000 RDI: 0000000000000000 [ 428.177109] RBP: ffff9a1a5fc03e08 R08: 0000000000000000 R09: 0000000000000000 [ 428.194547] R10: 0000000000021c77 R11: 0000000000000000 R12: ffff9a1857258000 [ 428.212002] R13: 0000000000000000 R14: 0000000000000020 R15: 0000000000000020 [ 428.229481] FS: 0000000000000000(0000) GS:ffff9a1a5fc00000(0000) knlGS:0000000000000000 [ 428.248938] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 428.263726] CR2: 00000000000001e0 CR3: 0000000390c06000 CR4: 00000000000006f0 [ 428.281331] Stack: [ 428.288696] ffffffffa3050ea0 ffff9a1857258000 ffff9a1a5fc03e18 ffffffffa24e0ab1 [ 428.307064] ffff9a1a5fc03e40 ffffffffa24e8865 ffffffffa3050ea0 00000000000000c2 [ 428.325456] 0000000000000046 ffff9a1a5fc03e78 ffffffffa24e8a5f ffffffffa3050ea0 [ 428.343905] Call Trace: [ 428.352319] [ 428.356216] [] uart_write_wakeup+0x21/0x30 The problem is for console ports, the serial port is not shutdown and interrupts may fire after the struct tty is gone. Simply calling the tty_port helper tty_port_tty_wakeup instead of tty_wakeup directly will ensure there is a valid struct tty. Fixes: 761ed4a94582ab29 ("tty: serial_core: convert uart_close to use tty_port_close") Reported-by: Borislav Petkov <bp@alien8.de> Reported-by: Mike Galbraith <mgalbraith@suse.de> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-serial@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28tty: serial_core: Fix serial console crash on port shutdownGeert Uytterhoeven
The port->console flag is always false, as uart_console() is called before the serial console has been registered. Hence for a serial port used as the console, uart_tty_port_shutdown() will still be called when userspace closes the port, powering it down. This may lead to a system lock up when the serial console driver writes to the serial port's registers. To fix this, move the setting of port->console after the call to uart_configure_port(), which registers the serial console. Fixes: 761ed4a94582ab29 ("tty: serial_core: convert uart_close to use tty_port_close") Reported-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Mugunthan V N <mugunthanvnm@ti.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> [robh: rebased on tty-linus] Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28tty/serial: at91: fix hardware handshake on Atmel platformsRichard Genoud
After commit 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled"), the hardware handshake wasn't functional anymore on Atmel platforms (beside SAMA5D2). To understand why, one has to understand the flag ATMEL_US_USMODE_HWHS first: Before commit 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled"), this flag was never set. Thus, the CTS/RTS where only handled by serial_core (and everything worked just fine). This commit introduced the use of the ATMEL_US_USMODE_HWHS flag, enabling it for all boards when the user space enables flow control. When the ATMEL_US_USMODE_HWHS is set, the Atmel USART controller handles a part of the flow control job: - disable the transmitter when the CTS pin gets high. - drive the RTS pin high when the DMA buffer transfer is completed or PDC RX buffer full or RX FIFO is beyond threshold. (depending on the controller version). NB: This feature is *not* mandatory for the flow control to work. (Nevertheless, it's very useful if low latencies are needed.) Now, the specifics of the ATMEL_US_USMODE_HWHS flag: - For platforms with DMAC and no FIFOs (sam9x25, sam9x35, sama5D3, sama5D4, sam9g15, sam9g25, sam9g35)* this feature simply doesn't work. ( source: https://lkml.org/lkml/2016/9/7/598 ) Tested it on sam9g35, the RTS pins always stays up, even when RXEN=1 or a new DMA transfer descriptor is set. => ATMEL_US_USMODE_HWHS must not be used for those platforms - For platforms with a PDC (sam926{0,1,3}, sam9g10, sam9g20, sam9g45, sam9g46)*, there's another kind of problem. Once the flag ATMEL_US_USMODE_HWHS is set, the RTS pin can't be driven anymore via RTSEN/RTSDIS in USART Control Register. The RTS pin can only be driven by enabling/disabling the receiver or setting RCR=RNCR=0 in the PDC (Receive (Next) Counter Register). => Doing this is beyond the scope of this patch and could add other bugs, so the original (and working) behaviour should be set for those platforms (meaning ATMEL_US_USMODE_HWHS flag should be unset). - For platforms with a FIFO (sama5d2)*, the RTS pin is driven according to the RX FIFO thresholds, and can be also driven by RTSEN/RTSDIS in USART Control Register. No problem here. (This was the use case of commit 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled")) NB: If the CTS pin declared as a GPIO in the DTS, (for instance cts-gpios = <&pioA PIN_PB31 GPIO_ACTIVE_LOW>), the transmitter will be disabled. => ATMEL_US_USMODE_HWHS flag can be set for this platform ONLY IF the CTS pin is not a GPIO. So, the only case when ATMEL_US_USMODE_HWHS can be enabled is when (atmel_use_fifo(port) && !mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_CTS)) Tested on all Atmel USART controller flavours: AT91SAM9G35-CM (DMAC flavour), AT91SAM9G20-EK (PDC flavour), SAMA5D2xplained (FIFO flavour). * the list may not be exhaustive Cc: <stable@vger.kernel.org> #4.4+ (beware, missing atmel_port variable) Fixes: 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled") Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28mtd: mtk: avoid warning in mtk_ecc_encodeArnd Bergmann
When building with -Wmaybe-uninitialized, gcc produces a silly false positive warning for the mtk_ecc_encode function: drivers/mtd/nand/mtk_ecc.c: In function 'mtk_ecc_encode': drivers/mtd/nand/mtk_ecc.c:402:15: error: 'val' may be used uninitialized in this function [-Werror=maybe-uninitialized] The function for some reason contains a double byte swap on big-endian builds to get the OOB data into the correct order again, and is written in a slightly confusing way. Using a simple memcpy32_fromio() to read the data simplifies it a lot so it becomes more readable and produces no warning. However, the output might not have 32-bit alignment, so we have to use another memcpy to avoid taking alignment faults or writing beyond the end of the array. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: RogerCC Lin <rogercc.lin@mediatek.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-10-28mtd: nand: Fix data interface configuration logicBoris Brezillon
When changing from one data interface setting to another, one has to ensure a specific sequence which is described in the ONFI spec. One of these constraints is that the CE line has go high after a reset before a command can be sent with the new data interface setting, which is not guaranteed by the current implementation. Rework the nand_reset() function and all the call sites to make sure the CE line is asserted and released when required. Also make sure to actually apply the new data interface setting on the first die. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: d8e725dd8311 ("mtd: nand: automate NAND timings selection") Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
2016-10-28mtd: nand: gpmi: disable the clocks on errorsFabio Estevam
We should disable the previously enabled GPMI clocks in the error paths. Also, when gpmi_enable_clk() fails simply return the error code immediately rather than jumping to to the 'err_out' label. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Han Xu <han.xu@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-10-27Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "20 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: drivers/misc/sgi-gru/grumain.c: remove bogus 0x prefix from printk cris/arch-v32: cryptocop: print a hex number after a 0x prefix ipack: print a hex number after a 0x prefix block: DAC960: print a hex number after a 0x prefix fs: exofs: print a hex number after a 0x prefix lib/genalloc.c: start search from start of chunk mm: memcontrol: do not recurse in direct reclaim CREDITS: update credit information for Martin Kepplinger proc: fix NULL dereference when reading /proc/<pid>/auxv mm: kmemleak: ensure that the task stack is not freed during scanning lib/stackdepot.c: bump stackdepot capacity from 16MB to 128MB latent_entropy: raise CONFIG_FRAME_WARN by default kconfig.h: remove config_enabled() macro ipc: account for kmem usage on mqueue and msg mm/slab: improve performance of gathering slabinfo stats mm: page_alloc: use KERN_CONT where appropriate mm/list_lru.c: avoid error-path NULL pointer deref h8300: fix syscall restarting kcov: properly check if we are in an interrupt mm/slab: fix kmemcg cache creation delayed issue
2016-10-28Merge branch 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Two sets of amdgpu fixes as I missed one set. * 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux: (23 commits) drm/amd/powerplay: fix bug get wrong evv voltage of Polaris. drm/amdgpu/si_dpm: workaround for SI kickers drm/radeon/si_dpm: workaround for SI kickers drm/amdgpu: fix s3 resume back, uvd dpm randomly can't disable. drm/radeon: drop register readback in cayman_cp_int_cntl_setup drm/amdgpu/vce3: only enable 3 rings on new enough firmware (v2) drm/amdgpu: fix fence slab teardown drm/amdgpu: update kernel-doc for some functions drm/amdgpu: fix a vm_flush fence leak drm/amdgpu: fix sched fence slab teardown Revert "drm/radeon: fix DP link training issue with second 4K monitor" drm/amdgpu/dpm: flush any thermal work on fini drm/amdgpu: cancel reset work on fini drm/amd/powerplay: don't give up if DPM is already running drm/amd/powerplay: fix static checker warning in process_pptables_v1_0.c drm/amdgpu: avoid drm error log during S3 on RHEL7.3 drm/amdgpu: explicitly set pg_flags for ST drm/amdgpu/st: move ATC CG golden init from gfx to mc drm/amd/amdgpu: expose max engine and memory clock for powerplay enabled case drm/amdgpu: move atom scratch register save/restore to common code ...
2016-10-27drivers/misc/sgi-gru/grumain.c: remove bogus 0x prefix from printkDimitri Sivanich
Would like to have this be a decimal number. Link: http://lkml.kernel.org/r/20161026134746.GA30169@sgi.com Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-27ipack: print a hex number after a 0x prefixUwe Kleine-König
It makes the result hard to interpret correctly if a base 10 number is prefixed by 0x. So change to a hex number. Link: http://lkml.kernel.org/r/20161026125658.25728-4-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Cc: Jens Taprogge <jens.taprogge@taprogge.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-27block: DAC960: print a hex number after a 0x prefixUwe Kleine-König
It makes the message hard to interpret correctly if a base 10 number is prefixed by 0x. So change to a hex number. Link: http://lkml.kernel.org/r/20161026125658.25728-3-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-27clk/samsung: Use CLK_OF_DECLARE_DRIVER initialization method for CLKOUTMarek Szyprowski
The Exynos PMU node is an interrupt, clock and PMU (Power Management Unit) controller, and these functionalities are supported by different drivers that matches the same compatible strings. Since commit 989eafd0b609 ("clk: core: Avoid double initialization of clocks") the OF core flags clock controllers registered with the CLK_OF_DECLARE() macro as OF_POPULATED, so platform devices with the same compatible string will not be registered. This prevents the PMU platform device to be created, so the Exynos PMU driver is never probed. This breaks (among other things) Suspend-to-RAM. Fix this by changing CLKOUT driver initialization method to CLK_OF_DECLARE_DRIVER(), which doesn't clear the OF_POPULATED flag, so later a platform device is created and the Exynos PMU platform driver can be be probed properly. Fixes: 989eafd0b609 ("clk: core: Avoid double initialization of clocks") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-27device-dax: fix percpu_ref_exit orderingDan Williams
We need to wait until the percpu_ref is released before exit. Otherwise, we sometimes lose the race and trigger this new warning that was added in v4.9 (commit a67823c1ed10 "percpu-refcount: init ->confirm_switch member properly"): WARNING: CPU: 0 PID: 3629 at lib/percpu-refcount.c:107 percpu_ref_exit+0x51/0x60 [..] Call Trace: [<ffffffff814bf093>] dump_stack+0x85/0xc2 [<ffffffff810b15db>] __warn+0xcb/0xf0 [<ffffffff810b170d>] warn_slowpath_null+0x1d/0x20 [<ffffffff814d70c1>] percpu_ref_exit+0x51/0x60 [<ffffffffa005706a>] dax_pmem_percpu_exit+0x1a/0x50 [dax_pmem] [<ffffffff81615f1f>] devm_action_release+0xf/0x20 Cc: <stable@vger.kernel.org> Fixes: ab68f2622136 ("/dev/dax, pmem: direct access to persistent memory") Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-27nvdimm: make CONFIG_NVDIMM_DAX 'bool'Arnd Bergmann
A bugfix just tried to address a randconfig build problem and introduced a variant of the same problem: with CONFIG_LIBNVDIMM=y and CONFIG_NVDIMM_DAX=m, the nvdimm module now fails to link: drivers/nvdimm/built-in.o: In function `to_nd_device_type': bus.c:(.text+0x1b5d): undefined reference to `is_nd_dax' drivers/nvdimm/built-in.o: In function `nd_region_notify_driver_action.constprop.2': region_devs.c:(.text+0x6b6c): undefined reference to `is_nd_dax' region_devs.c:(.text+0x6b8c): undefined reference to `to_nd_dax' drivers/nvdimm/built-in.o: In function `nd_region_probe': region.c:(.text+0x70f3): undefined reference to `nd_dax_create' drivers/nvdimm/built-in.o: In function `mode_show': namespace_devs.c:(.text+0xa196): undefined reference to `is_nd_dax' drivers/nvdimm/built-in.o: In function `nvdimm_namespace_common_probe': (.text+0xa55f): undefined reference to `is_nd_dax' drivers/nvdimm/built-in.o: In function `nvdimm_namespace_common_probe': (.text+0xa56e): undefined reference to `to_nd_dax' This reverts the earlier fix, making NVDIMM_DAX a 'bool' option again as it should be (it gets linked into the libnvdimm module). To fix the original problem, I'm adding a dependency on LIBNVDIMM to DEV_DAX_PMEM, which ensures we can't have that one built-in if the rest is a module. Fixes: 4e65e9381c7a ("/dev/dax: fix Kconfig dependency build breakage") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-27Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "I2C has some driver bugfixes, module autoload fixes, and driver enablement on some architectures" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: imx: defer probe if bus recovery GPIOs are not ready i2c: designware: Avoid aborted transfers with fast reacting I2C slaves i2c: i801: Fix I2C Block Read on 8-Series/C220 and later i2c: xgene: Avoid dma_buffer overrun i2c: digicolor: Fix module autoload i2c: xlr: Fix module autoload for OF registration i2c: xlp9xx: Fix module autoload i2c: jz4780: Fix module autoload i2c: allow configuration of imx driver for ColdFire architecture i2c: mark device nodes only in case of successful instantiation i2c: rk3x: Give the tuning value 0 during rk3x_i2c_v0_calc_timings i2c: hix5hd2: allow build with ARCH_HISI
2016-10-27Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal updates from Zhang Rui: "The latest Thermal Management updates for v4.9-rc3: - Fix a regression introduced by commit b721ca0d19(thermal/powerclamp: remove cpu whitelist), that powerclamp driver checks cpu support in a wrong way. From: Eric Ernst. - Fix a problem that intel_pch_thermal driver misses passive trip point when the PCH thermal device has an ACPI companion device associated. From: Srinivas Pandruvada. - Add missing support for Haswell PCH thermal sensor. From: Srinivas Pandruvada" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal/powerclamp: correct cpu support check thermal: intel_pch_thermal: Enable Haswell PCH thermal: intel_pch_thermal: Add an ACPI passive trip
2016-10-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A few more s390 patches for 4.9: - a fix for an overflow in the dasd driver reported by UBSAN - fix a regression and add hotplug memory to the zone movable again - add ignore defines for the pkey system calls - fix the ouput of the merged stack tracer - replace printk with pr_cont in arch/s390 where appropriate - remove the arch specific return_address function again - ignore reserved channel paths at boot time - add a missing hugetlb_bad_size call to the arch backend" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: fix zone calculation in arch_add_memory() s390/dumpstack: use pr_cont within show_stack and die s390/dumpstack: get rid of return_address again s390/disassambler: use pr_cont where appropriate s390/dumpstack: use pr_cont where appropriate s390/dumpstack: restore reliable indicator for call traces s390/mm: use hugetlb_bad_size() s390/cio: don't register chpids in reserved state s390: ignore pkey system calls s390/dasd: avoid undefined behaviour
2016-10-27i40e: fix call of ndo_dflt_bridge_getlink()Huaibin Wang
Order of arguments is wrong. The wrong code has been introduced by commit 7d4f8d871ab1, but is compiled only since commit 9df70b66418e. Note that this may break netlink dumps. Fixes: 9df70b66418e ("i40e: Remove incorrect #ifdef's") Fixes: 7d4f8d871ab1 ("switchdev; add VLAN support for port's bridge_getlink") CC: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Huaibin Wang <huaibin.wang@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-27i40e: disable MSI-X interrupts if we cannot reserve enough vectorsGuilherme G Piccoli
If we fail on allocating enough MSI-X interrupts, we should disable them since they were previously enabled in this point of code. Not disabling them can lead to WARN_ON() being triggered and subsequent failure in enabling MSI as a fallback; the below message was shown without this patch while we played with interrupt allocation in i40e driver: [ 21.461346] sysfs: cannot create duplicate filename '/devices/pci0007:00/0007:00:00.0/0007:01:00.3/msi_irqs' [ 21.461459] ------------[ cut here ]------------ [ 21.461514] WARNING: CPU: 64 PID: 1155 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x88/0xc0 Also, we noticed that without this patch, if we modprobe the module without enough MSI-X interrupts (triggering the above warning), unload the module and re-load it again, we got a crash on the system. Signed-off-by: Guilherme G Piccoli <gpiccoli@linux.vnet.ibm.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-27i40e: Fix configure TCs after initial DCB disableDavid Ertman
in commit a036244c068612a43fa8c0f33a0eb4daa4d8dba0 a fix was put into place to avoid a kernel panic when a non- supported traffic class configuration was put into place and then lldp was enabled/disabled on the link partner switch. This fix caused it to be necessary to unload/reload the driver to reenable DCB once a supported TC config was in place. The root cause of the original panic was that the function i40e_pf_get_default_tc was allowing for a default TC other than TC 0, and only TC 0 is supported as a default. This patch removes the get_default_tc function and replaces it with a #define since there is only one TC supported as a default. Change-Id: I448371974e946386d0a7718d73668b450b7c72ef Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Ronald Bynoe <ronald.j.bynoe@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-27ixgbe: fix panic when using macvlan with l2-fwd-offload enabledEmil Tantilov
Fix NULL pointer dereference in the case where a macvlan interface is brought up while the PF is still down: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffffa0170fb2>] ixgbe_alloc_rx_buffers+0x42/0x1a0 [ixgbe] Call Trace: [<ffffffffa017336b>] ixgbe_configure_rx_ring+0x2eb/0x3d0 [ixgbe] [<ffffffffa0173811>] ixgbe_fwd_ring_up+0xd1/0x380 [ixgbe] [<ffffffffa0179709>] ixgbe_fwd_add+0x149/0x230 [ixgbe] [<ffffffffa0113480>] macvlan_open+0x260/0x2b0 [macvlan] Reported-by: Matthew Garrett <mjg59@coreos.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-27net: bgmac: fix spelling mistake: "connecton" -> "connection"Colin Ian King
trivial fix to spelling mistake in dev_err message Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27kalmia: avoid potential uninitialized variable useArnd Bergmann
The kalmia_send_init_packet() returns zero or a negative return code, but gcc has no way of knowing that there cannot be a positive return code, so it determines that copying the ethernet address at the end of kalmia_bind() will access uninitialized data: drivers/net/usb/kalmia.c: In function ‘kalmia_bind’: arch/x86/include/asm/string_32.h:78:22: error: ‘*((void *)&ethernet_addr+4)’ may be used uninitialized in this function [-Werror=maybe-uninitialized] *((short *)to + 2) = *((short *)from + 2); ^ drivers/net/usb/kalmia.c:138:5: note: ‘*((void *)&ethernet_addr+4)’ was declared here This warning is harmless, but for consistency, we should make the check for the return code match what the driver does everywhere else and just progate it, which then gets rid of the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27macsec: Fix header length if SCI is added if explicitly disabledTobias Brunner
Even if sending SCIs is explicitly disabled, the code that creates the Security Tag might still decide to add it (e.g. if multiple RX SCs are defined on the MACsec interface). But because the header length so far only depended on the configuration option the SCI overwrote the original frame's contents (EtherType and e.g. the beginning of the IP header) and if encrypted did not visibly end up in the packet, while the SC flag in the TCI field of the Security Tag was still set, resulting in invalid MACsec frames. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Tobias Brunner <tobias@strongswan.org> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27at803x: double check SGMII side autonegZefir Kurtisi
In SGMII mode, we observed an autonegotiation issue after power-down-up cycles where the copper side reports successful link establishment but the SGMII side's link is down. This happened in a setup where the at8031 is connected over SGMII to a eTSEC (fsl gianfar), but so far could not be reproduced with other Ethernet device / driver combinations. This commit adds a wrapper function for at8031 that in case of operating in SGMII mode double checks SGMII link state when generic aneg_done() succeeds. It prints a warning on failure but intentionally does not try to recover from this state. As a result, if you ever see a warning '803x_aneg_done: SGMII link is not ok' you will end up having an Ethernet link up but won't get any data through. This should not happen, if it does, please contact the module maintainer. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27Revert "at803x: fix suspend/resume for SGMII link"Zefir Kurtisi
This reverts commit 98267311fe3b334ae7c107fa0e2413adcf3ba735. Suspending the SGMII alongside the copper side made the at803x inaccessable while powered down, e.g. it can't be re-probed after suspend. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27drm/amd/powerplay: fix bug get wrong evv voltage of Polaris.Rex Zhu
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-10-27drm/amdgpu/si_dpm: workaround for SI kickersAlex Deucher
Consolidate existing quirks. Fixes stability issues on some kickers. Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-10-27Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two small fixes: one is a fatal section mismatch (reference to init after it's discarded) and the other two are iscsi locking fixes" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: NCR5380: no longer mark irq probing as __init scsi: be2iscsi: Replace _bh with _irqsave/irqrestore scsi: libiscsi: Fix locking in __iscsi_conn_send_pdu
2016-10-27Merge branch 'for-4.9-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "The AHCI MSI handling change in rc1 was a bit broken and caused disk probing failures on some machines. These three patches should fix the issues" David Howells comments: "My test machine fell foul of this using a PCIe M.2-attached SSD card. The patches fix it for me" * 'for-4.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: fix the single MSI-X case in ahci_init_one ahci: fix nvec check ahci: only try to use multi-MSI mode if there is more than 1 port
2016-10-27Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A set of fixes for this series, most notably the fix for the blk-mq software queue regression in from this merge window. Apart from that, a fix for an unlikely hang if a queue is flooded with FUA requests from Ming, and a few small fixes for nbd and badblocks. Lastly, a rename update for the proc softirq output, since the block polling code was made generic" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: update hardware and software queues for sleeping alloc block: flush: fix IO hang in case of flood fua req nbd: fix incorrect unlock of nbd->sock_lock in sock_shutdown badblocks: badblocks_set/clear update unacked_exist softirq: Display IRQ_POLL for irq-poll statistics
2016-10-27driver core: Make Kconfig text for DEBUG_TEST_DRIVER_REMOVE strongerLaura Abbott
The current state of driver removal is not great. CONFIG_DEBUG_TEST_DRIVER_REMOVE finds lots of errors. The help text currently undersells exactly how many errors this option will find. Add a bit more description to indicate this option shouldn't be turned on unless you actually want to debug driver removal. The text can be changed later when more drivers are fixed up. Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-12 11:00:00 +0000