| Age | Commit message (Collapse) | Author |
|---|
|
Due to the restrict in MAC80211 that DFS (Dynamic Frequency Selection)
can't be enabled on multiple channels, commit 176f3009ae59 ("wifi: ath12k:
support 2 channels for single pdev device") removes DFS support in order
to support 2 channels concurrently, making AP mode not working on DFS
channels [1].
Revert portions of that commit to bring DFS back, and add a new
combination to support 2-channels concurrency. This is valid because the
MAC80211 restrict works on each individual combination, but does not care
about them as a whole, as far as DFS is concerned.
This change applies to WCN7850 only, other chips are not affected.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: 176f3009ae59 ("wifi: ath12k: support 2 channels for single pdev device")
Reported-by: Mihai Moldovan <ionic@ionic.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220346 # 1
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Tested-by: Mihai Moldovan <ionic@ionic.de>
Link: https://patch.msgid.link/20250721-ath12k-dfs-v1-1-065c31454f91@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Prefer {} to {0} in initializers since {} works even when the first
member is not a scalar.
Generated using:
sed -i 's/{[[:space:]]*0[[:space:]]*}/{}/g' drivers/net/wireless/ath/ath12k/*
Compile tested only.
Link: https://patch.msgid.link/20250720-ath12k-zero-brace-v1-1-d8c8ca9d40a8@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Prefer {} to {0} in initializers since {} works even when the first
member is not a scalar.
Generated using:
sed -i 's/{[[:space:]]*0[[:space:]]*}/{}/g' drivers/net/wireless/ath/ath11k/*
Compile tested only.
Link: https://patch.msgid.link/20250720-ath11k-zero-brace-v1-1-6132e2ef1748@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Prefer {} to {0} in initializers since {} works even when the first
member is not a scalar.
Generated using:
sed -i 's/{[[:space:]]*0[[:space:]]*}/{}/g' drivers/net/wireless/ath/ath10k/*
Compile tested only.
Link: https://patch.msgid.link/20250720-ath10k-zero-brace-v1-1-c1ee818d6238@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
As the trace event powernv_throttle is only used by the powernv code, move
it to a separate include file and have that code directly enable it.
Trace events can take up around 5K of memory when they are defined
regardless if they are used or not. It wastes memory to have them defined
in configurations where the tracepoint is not used.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/20250612145407.906308844@goodmis.org
Fixes: 0306e481d479a ("cpufreq: powernv/tracing: Add powernv_throttle tracepoint")
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
CYW54591 is a variant of BCM4355 silicon with the same chipid. In the
chipid-fwname mapping table, apply chiprev 13 to identify CYW54591.
Skip reading OTP process for CYW chip since it contains vendor specific
information which is not common for cypress.
Signed-off-by: Double Lo <double.lo@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ian Lin <ian.lin@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250624093453.7264-1-ian.lin@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
After commit bd99a3013bdc ("brcmfmac: move configuration of probe request
IEs"), the probe request MGMT IE addition operation brcmf_vif_set_mgmt_ie()
got moved from the brcmf_p2p_scan_prep() to the brcmf_cfg80211_scan().
Because of this, as part of the scan request handler for the P2P Discovery,
vif struct used for adding the Probe Request P2P IE in firmware got changed
from the P2PAPI_BSSCFG_DEVICE vif to P2PAPI_BSSCFG_PRIMARY vif incorrectly.
So the firmware stopped adding P2P IE to the outgoing P2P Discovery probe
requests frames and the other P2P peers were unable to discover this device
causing a regression on the P2P feature.
To fix this, while setting the P2P IE in firmware, properly use the vif of
the P2P discovery wdev on which the driver received the P2P scan request.
This is done by not changing the vif pointer, until brcmf_vif_set_mgmt_ie()
is completed.
Fixes: bd99a3013bdc ("brcmfmac: move configuration of probe request IEs")
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250626050706.7271-1-gokulkumar.sivakumar@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
As described by Vitaly Lifshits:
> Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the
> driver cannot perform checksum validation and correction. This means
> that all NVM images must leave the factory with correct checksum and
> checksum valid bit set.
Unfortunately some systems have left the factory with an uninitialized
value of 0xFFFF at register address 0x3F (checksum word location).
So on Tiger Lake platform we ignore the computed checksum when such
condition is encountered.
Signed-off-by: Jacek Kowalski <jacek@jacekk.info>
Tested-by: Vlad URSU <vlad@ursu.me>
Fixes: 4051f68318ca9 ("e1000e: Do not take care about recovery NVM checksum")
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
As described by Vitaly Lifshits:
> Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the
> driver cannot perform checksum validation and correction. This means
> that all NVM images must leave the factory with correct checksum and
> checksum valid bit set. Since Tiger Lake devices were the first to have
> this lock, some systems in the field did not meet this requirement.
> Therefore, for these transitional devices we skip checksum update and
> verification, if the valid bit is not set.
Signed-off-by: Jacek Kowalski <jacek@jacekk.info>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Fixes: 4051f68318ca9 ("e1000e: Do not take care about recovery NVM checksum")
Cc: stable@vger.kernel.org
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add check for the return value of devm_kmemdup()
to prevent potential null pointer dereference.
Fixes: c76488109616 ("ice: Implement Dynamic Device Personalization (DDP) download")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When the PF is processing an Admin Queue message to delete a VF's MACs
from the MAC filter, we currently check if the PF set the MAC and if
the VF is trusted.
This results in undesirable behaviour, where if a trusted VF with a
PF-set MAC sets itself down (which sends an AQ message to delete the
VF's MAC filters) then the VF MAC is erased from the interface.
This results in the VF losing its PF-set MAC which should not happen.
There is no need to check for trust at all, because an untrusted VF
cannot change its own MAC. The only check needed is whether the PF set
the MAC. If the PF set the MAC, then don't erase the MAC on link-down.
Resolve this by changing the deletion check only for PF-set MAC.
(the out-of-tree driver has also intentionally removed the check for VF
trust here with OOT driver version 2.26.8, this changes the Linux kernel
driver behaviour and comment to match the OOT driver behaviour)
Fixes: ea2a1cfc3b201 ("i40e: Fix VF MAC filter removal")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently the tx_dropped field in VF stats is not updated correctly
when reading stats from the PF. This is because it reads from
i40e_eth_stats.tx_discards which seems to be unused for per VSI stats,
as it is not updated by i40e_update_eth_stats() and the corresponding
register, GLV_TDPC, is not implemented[1].
Use i40e_eth_stats.tx_errors instead, which is actually updated by
i40e_update_eth_stats() by reading from GLV_TEPC.
To test, create a VF and try to send bad packets through it:
$ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs
$ cat test.py
from scapy.all import *
vlan_pkt = Ether(dst="ff:ff:ff:ff:ff:ff") / Dot1Q(vlan=999) / IP(dst="192.168.0.1") / ICMP()
ttl_pkt = IP(dst="8.8.8.8", ttl=0) / ICMP()
print("Send packet with bad VLAN tag")
sendp(vlan_pkt, iface="enp2s0f0v0")
print("Send packet with TTL=0")
sendp(ttl_pkt, iface="enp2s0f0v0")
$ ip -s link show dev enp2s0f0
16: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 3c:ec:ef:b7:e0:ac brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast
0 0 0 0 0 0
TX: bytes packets errors dropped carrier collsns
0 0 0 0 0 0
vf 0 link/ether e2:c6:fd:c1:1e:92 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off
RX: bytes packets mcast bcast dropped
0 0 0 0 0
TX: bytes packets dropped
0 0 0
$ python test.py
Send packet with bad VLAN tag
.
Sent 1 packets.
Send packet with TTL=0
.
Sent 1 packets.
$ ip -s link show dev enp2s0f0
16: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 3c:ec:ef:b7:e0:ac brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast
0 0 0 0 0 0
TX: bytes packets errors dropped carrier collsns
0 0 0 0 0 0
vf 0 link/ether e2:c6:fd:c1:1e:92 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off
RX: bytes packets mcast bcast dropped
0 0 0 0 0
TX: bytes packets dropped
0 0 0
A packet with non-existent VLAN tag and a packet with TTL = 0 are sent,
but tx_dropped is not incremented.
After patch:
$ ip -s link show dev enp2s0f0
19: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 3c:ec:ef:b7:e0:ac brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast
0 0 0 0 0 0
TX: bytes packets errors dropped carrier collsns
0 0 0 0 0 0
vf 0 link/ether 4a:b7:3d:37:f7:56 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off
RX: bytes packets mcast bcast dropped
0 0 0 0 0
TX: bytes packets dropped
0 0 2
Fixes: dc645daef9af5bcbd9c ("i40e: implement VF stats NDO")
Signed-off-by: Dennis Chen <dechen@redhat.com>
Link: https://www.intel.com/content/www/us/en/content-details/596333/intel-ethernet-controller-x710-tm4-at2-carlsville-datasheet.html
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes
Pull Allwinner clock fixes from Chen-Yu Tsai:
- Mark A523 MBUS clock as critical
- Fix names of CSI related clocks on V3s
This includes changes to the driver, DT bindings and DT files.
- Fix parents of TCON clock on V3s
* tag 'sunxi-clk-fixes-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
clk: sunxi-ng: v3s: Fix TCON clock parents
clk: sunxi-ng: v3s: Fix CSI1 MCLK clock name
clk: sunxi-ng: v3s: Fix CSI SCLK clock name
clk: sunxi-ng: a523: Mark MBUS clock as critical
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: Updates for v6.17-rc1
The bulk of this is the addition of Tegra264 support for various low-
level components. This also adds fabric descriptors for the new Tegra254
and Tegra264 chips.
* tag 'tegra-for-6.17-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: cbb: Add support for CBB fabrics in Tegra254
soc/tegra: cbb: Add support for CBB fabrics in Tegra264
soc/tegra: cbb: Support HW lookup to get timed out target address
soc/tegra: cbb: Improve handling for per SoC fabric data
soc/tegra: cbb: Make error interrupt enable and status per SoC
soc/tegra: cbb: Change master/slave to initiator/target
soc/tegra: cbb: Clear ERR_FORCE register with ERR_STATUS
soc/tegra: Add Tegra264 APBMISC compatible string
soc/tegra: pmc: Add Tegra264 support
soc/tegra: Enable support for Tegra264
Link: https://lore.kernel.org/r/20250711220943.2389322-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The conversion to using the new GPIO line setter callbacks missed the
set_multiple() in this file. Convert it to using the new callback.
Fixes: 52ccf19527fd ("soc: fsl: qe: use new GPIO line value setter callbacks")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrea della Porta <andrea.porta@suse.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
On i386, when
CONFIG_X86_INTEL_CE=y
# CONFIG_SERIAL_8250 is not set
it will try to compile the driver and use the stub simultaneously.
This breaks the build. Fix it by making sure that the driver
compiles only when CONFIG_SERIAL_8250 is also enabled.
On top of that ensure that CONFIG_SERIAL_8250 is actually set to 'y'
and not 'm' as the later makes no sense for this platform. The hook
may only be applied during early boot.
Fixes: acc902de05b2 ("serial: 8250: Move CE4100 quirks to a module under 8250 driver")
Fixes: 5ec6960f6f0c ("ce4100: Add errata fixes for UART on CE4100")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/r/cdf4ee46-7bf8-4379-9245-fed9db72e7e8@infradead.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20250716142412.1667927-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
- power supply code:
- Add get/set property direct to allow avoiding taking
psy->extensions_sem twice from power supply extensions
- alienware-wmi-wmax:
- Add AWCC support for Alienware Area-51m and m15 R5
- Fix `dmi_system_id` array termination
- arm64: huawei-gaokun-ec: fix OF node leak
- dell-ddv: Fix taking psy->extensions_sem twice
- dell-lis3lv02d: Add Precision 3551 accelerometer support
- firmware_attributes_class: Fix initialization order
- ideapad-laptop: Retain FnLock and kbd backlight across boots
- lenovo-wmi-hotkey: Avoid triggering error -5 due to missing mute LED
- mellanox: mlxbf-pmc: Validate event names and bool input
* tag 'platform-drivers-x86-v6.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
MAINTAINERS: Update entries for IFS and SBL drivers
platform/x86: dell-lis3lv02d: Add Precision 3551
platform/x86: alieneware-wmi-wmax: Add AWCC support to more laptops
platform/x86: Fix initialization order for firmware_attributes_class
platform: arm64: huawei-gaokun-ec: fix OF node leak
lenovo-wmi-hotkey: Avoid triggering error -5 due to missing mute LED
platform/x86: ideapad-laptop: Fix kbd backlight not remembered among boots
platform/x86: ideapad-laptop: Fix FnLock not remembered among boots
platform/mellanox: mlxbf-pmc: Use kstrtobool() to check 0/1 input
platform/mellanox: mlxbf-pmc: Validate event/enable input
platform/mellanox: mlxbf-pmc: Remove newline char from event name input
platform/x86: dell-ddv: Fix taking the psy->extensions_sem lock twice
power: supply: test-power: Test access to extended power supply
power: supply: core: Add power_supply_get/set_property_direct()
platform/x86: alienware-wmi-wmax: Fix `dmi_system_id` array
|
|
Patches from Peter Chen <peter.chen@cixtech.com>:
Cixtech P1 (internal name sky1) is high performance generic Armv9 SoC.
Orion O6 is the Arm V9 Motherboard built by Radxa. You could find brief
introduction for SoC and related boards at:
https://radxa.com/products/orion/o6#overview
Currently, to run upstream kernel at Orion O6 board, you need to
use BIOS released by Radxa, and add "clk_ignore_unused=1" at bootargs.
https://docs.radxa.com/en/orion/o6/bios/install-bios
In this series, we add initial SoC and board support for Kernel building.
Since mailbox is used for SCMI clock communication, mailbox driver is added
in this series for the minimum SoC support.
Patch 1-2: add dt-binding doc for CIX and its sky1 SoC
Patch 3: add Arm64 build support
Patch 4-5: add CIX mailbox driver which needs to support SCMI clock protocol.
Patch 6: add Arm64 defconfig support
Patch 7-8: add initial dts support for SoC and Orion O6 board
Patch 9: add MAINTAINERS entry
* newsoc/cix-p1:
MAINTAINERS: Add CIX SoC maintainer entry
arm64: dts: cix: Add sky1 base dts initial support
dt-bindings: clock: cix: Add CIX sky1 scmi clock id
arm64: defconfig: Enable CIX SoC
mailbox: add CIX mailbox driver
dt-bindings: mailbox: add cix,sky1-mbox
arm64: Kconfig: add ARCH_CIX for cix silicons
dt-bindings: arm: add CIX P1 (SKY1) SoC
dt-bindings: vendor-prefixes: Add CIX Technology Group Co., Ltd.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The CIX mailbox controller, used in the Cix SoCs, like sky1.
facilitates message transmission between multiple processors
within the SoC, such as the AP, PM, audio DSP, SensorHub MCU,
and others.
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Reviewed-by: Peter Chen <peter.chen@cixtech.com>
Signed-off-by: Guomin Chen <Guomin.Chen@cixtech.com>
Signed-off-by: Gary Yang <gary.yang@cixtech.com>
Signed-off-by: Lihua Liu <Lihua.Liu@cixtech.com>
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/drivers
This pull request contains Broadcom SoCs drivers updates for 6.17,
please pull the following:
- Andrea adds the RP1 clock, pinctrl/pinconf/gpio and misc driver to
bind them all
* tag 'arm-soc/for-6.17/drivers' of https://github.com/Broadcom/stblinux:
pinctrl: rp1: Implement RaspberryPi RP1 pinmux/pinconf support
misc: rp1: RaspberryPi RP1 misc driver
pinctrl: rp1: Implement RaspberryPi RP1 gpio support
clk: rp1: Add support for clocks provided by RP1
dt-bindings: clock: Add RaspberryPi RP1 clock bindings
Link: https://lore.kernel.org/r/20250630190216.1518354-4-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/drivers
MediaTek soc driver updates for v6.17
This adds a single cleanup commit for the mtk-mutex driver,
clarifying the usage of the MUTEX_MOD1, MUTEX_MOD2 registers
for applying display controller sub-component mute settings
on all MediaTek SoCs.
* tag 'mtk-soc-for-v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mediatek: mtk-mutex: Fix confusing usage of MUTEX_MOD2
Link: https://lore.kernel.org/r/20250711083656.33538-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/drivers
Reset controller updates for v6.17
* Support reset controllers on Kendryte K230 and SOPHGO CV1800B.
* Add RZ/V2N USB2PHY reset controller bindings
* Use auxiliary device creation helpers in reset-mpfs.
* Convert nxp,lcp1850-rgu and snps,dw-reset binding docs to DT schema.
* Enable reset-brcmstb(-rescal) on BCM2712.
* Fix a typo in the T-HEAD TH1520 Kconfig option
* tag 'reset-for-v6.17' of https://git.pengutronix.de/git/pza/linux:
dt-bindings: reset: Convert snps,dw-reset to DT schema
reset: brcmstb: Enable reset drivers for ARCH_BCM2835
reset: simple: add support for Sophgo CV1800B
dt-bindings: reset: sophgo: Add CV1800B support
reset: mpfs: use the auxiliary device creation
dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/V2N SoC support
dt-bindings: reset: convert nxp,lpc1850-rgu.txt to yaml format
reset: thead: Fix TH1520 typo
reset: canaan: add reset driver for Kendryte K230
dt-bindings: reset: add support for canaan,k230-rst
Link: https://lore.kernel.org/r/20250710152513.1346298-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There is a extraneous space before a newline in a pr_warn message.
Remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250721135016.2500117-1-colin.i.king@gmail.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
FSL SOC Changes for 6.17:
- Use dev_fwnode() instead of of_fwnode_handle()
- Use new GPIO line value setter callbacks
* tag 'soc_fsl-6.17-1' of https://github.com/chleroy/linux:
soc: Use dev_fwnode()
soc: fsl: qe: use new GPIO line value setter callbacks
Link: https://lore.kernel.org/r/c947d537-cae5-44f0-abd8-0c558bac46d2@csgroup.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/drivers
ASPEED SoC driver updates for 6.17
The ASPEED LPC snoop driver was recently the cause of some concern. In addition
to the initial fixes, the channel configuration paths are refactored to improve
robustness against errors.
* tag 'aspeed-6.17-drivers-1' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
soc: aspeed: lpc-snoop: Lift channel config to const structs
soc: aspeed: lpc-snoop: Consolidate channel initialisation
soc: aspeed: lpc-snoop: Use dev_err_probe() where possible
soc: aspeed: lpc-snoop: Switch to devm_clk_get_enabled()
soc: aspeed: lpc-snoop: Rearrange channel paths
soc: aspeed: lpc-snoop: Rename 'channel' to 'index' in channel paths
soc: aspeed: lpc-snoop: Constrain parameters in channel paths
soc: aspeed: lpc-snoop: Ensure model_data is valid
soc: aspeed: lpc-snoop: Don't disable channels that aren't enabled
soc: aspeed: lpc-snoop: Cleanup resources in stack-order
Link: https://lore.kernel.org/r/9123f151280e52c63dcb645cb07d4eee3462c067.camel@codeconstruct.com.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers
Renesas driver updates for v6.17 (take two)
- Sort Renesas Kconfig symbols.
* tag 'renesas-drivers-for-v6.17-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: Sort Renesas Kconfig configs
Link: https://lore.kernel.org/r/cover.1752090398.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.17
1. A fix is introduced to correct turbo frequency marking for 64-bit
devices with sustained frequencies over 4GHz, ensuring accurate turbo
frequency identification.
2. Debug capabilities are being improved by introducing in-flight transfer
tracking using debug counters, which help diagnose transfer congestion
and behavior. Additional tracepoints are added to log in-flight counts
at transfer begin and end, offering better runtime insight. The debug
counters now support decrement operations using a newly added
scmi_dec_count helper, making counter tracking symmetric and more robust.
3. A race condition in suspend-resume logic is being resolved by ensuring
SCMI_SYSPOWER_IDLE state is set early during resume, improving suspend
reliability under certain conditions. New suspend and resume operations
are added to the scmi_bus_type to enable finer power management control
for SCMI-based devices.
4. Finally enhancements are also made to avoid registering notifiers for
events that a platform does not support, reducing unnecessary overhead
by checking for unsupported event types during protocolinitialization.
* tag 'scmi-updates-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Convert to SYSTEM_SLEEP_PM_OPS
firmware: arm_scmi: Avoid notifier registration for unsupported events
firmware: arm_scmi: power_control: Ensure SCMI_SYSPOWER_IDLE is set early during resume
firmware: arm_scmi: Add power management operations to SCMI bus
include: trace: Add tracepoint support for inflight xfer count
firmware: arm_scmi: Track number of inflight SCMI transfers
firmware: arm_scmi: Add support for debug counter decrement
firmware: arm_scmi: Fix up turbo frequencies selection
Link: https://lore.kernel.org/r/20250709122907.1171913-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
firmware: smccc: Update for v6.17
Just a single update extending arm_smccc_hypervisor_has_uuid() to
support both SMC and HVC conduits, enabling UUID retrieval when Linux
runs as the root partition under Microsoft Hypervisor (MSHV), where
SMC is used. It leverages arm_smccc_1_1_invoke() to dynamically select
the appropriate conduit, enhancing compatibility beyond just HVC.
* tag 'smccc-updates-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: smccc: Support both smc and hvc conduits for getting hyp UUID
Link: https://lore.kernel.org/r/20250709122615.1171419-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Merge series from Heiko Schocher <hs@denx.de>:
This series introduces the changes needed for trivial spi
based sensors from ABB, currently operated from userspace.
|
|
The second instance of TBSVC_MATCH_PROTOCOL_VERSION seems to have been
intended to be TBSVC_MATCH_PROTOCOL_REVISION.
Fixes: d1ff70241a27 ("thunderbolt: Add support for XDomain discovery protocol")
Cc: stable <stable@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/r/20250721050136.30004-1-ebiggers@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The current power direction of an USB-C port also influences the
power_supply's online status, so a power role change should also update
the power_supply.
Fixes an issue on some systems where plugging in a normal USB device in
for the first time after a reboot will cause upower to erroneously
consider the system to be connected to AC power.
Cc: stable <stable@kernel.org>
Fixes: 0e6371fbfba3 ("usb: typec: ucsi: Report power supply changes")
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250721-fix-ucsi-pwr-dir-notify-v1-1-e53d5340cb38@qtmlabs.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ucsi_psy_get_current_max would return 0mA as the maximum current if
UCSI detected a BC or a Default USB Power sporce.
The comment in this function is true that we can't tell the difference
between DCP/CDP or SDP chargers, but we can guarantee that at least 1-unit
of USB 1.1/2.0 power is available, which is 100mA, which is a better
fallback value than 0, which causes some userspaces, including the ChromeOS
power manager, to regard this as a power source that is not providing
any power.
In reality, 100mA is guaranteed from all sources in these classes.
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Jameson Thies <jthies@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250717200805.3710473-1-bleung@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes a race condition communication error, which ends up in
PD hard resets when losing the race. Some systems, like the Radxa ROCK
5B are powered through USB-C without any backup power source and use a
FUSB302 chip to do the PD negotiation. This means it is quite important
to avoid hard resets, since that effectively kills the system's
power-supply.
I've found the following race condition while debugging unplanned power
loss during booting the board every now and then:
1. lots of TCPM/FUSB302/PD initialization stuff
2. TCPM ends up in SNK_WAIT_CAPABILITIES (tcpm_set_pd_rx is enabled here)
3. the remote PD source does not send anything, so TCPM does a SOFT RESET
4. TCPM ends up in SNK_WAIT_CAPABILITIES for the second time
(tcpm_set_pd_rx is enabled again, even though it is still on)
At this point I've seen broken CRC good messages being send by the
FUSB302 with a logic analyzer sniffing the CC lines. Also it looks like
messages are being lost and things generally going haywire with one of
the two sides doing a hard reset once a broken CRC good message was send
to the bus.
I think the system is running into a race condition, that the FIFOs are
being cleared and/or the automatic good CRC message generation flag is
being updated while a message is already arriving.
Let's avoid this by caching the PD RX enabled state, as we have already
processed anything in the FIFOs and are in a good state. As a side
effect that this also optimizes I2C bus usage :)
As far as I can tell the problem theoretically also exists when TCPM
enters SNK_WAIT_CAPABILITIES the first time, but I believe this is less
critical for the following reason:
On devices like the ROCK 5B, which are powered through a TCPM backed
USB-C port, the bootloader must have done some prior PD communication
(initial communication must happen within 5 seconds after plugging the
USB-C plug). This means the first time the kernel TCPM state machine
reaches SNK_WAIT_CAPABILITIES, the remote side is not sending messages
actively. On other devices a hard reset simply adds some extra delay and
things should be good afterwards.
Fixes: c034a43e72dda ("staging: typec: Fairchild FUSB302 Type-c chip driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250704-fusb302-race-condition-fix-v1-1-239012c0e27a@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Selecting DRM_AUX_HPD_BRIDGE is not possible from a built-in driver when
CONFIG_DRM=m:
WARNING: unmet direct dependencies detected for DRM_AUX_HPD_BRIDGE
Depends on [m]: HAS_IOMEM [=y] && DRM [=m] && DRM_BRIDGE [=y] && OF [=y]
Selected by [y]:
- UCSI_LENOVO_YOGA_C630 [=y] && USB_SUPPORT [=y] && TYPEC [=y] && TYPEC_UCSI [=y] && EC_LENOVO_YOGA_C630 [=y] && DRM_BRIDGE [=y] && OF [=y]
arm-linux-gnueabi-ld: drivers/gpu/drm/bridge/aux-hpd-bridge.o: in function `drm_aux_hpd_bridge_notify':
aux-hpd-bridge.c:(.text.drm_aux_hpd_bridge_notify+0x28): undefined reference to `drm_bridge_hpd_notify'
arm-linux-gnueabi-ld: drivers/gpu/drm/bridge/aux-hpd-bridge.o: in function `drm_aux_hpd_bridge_probe':
aux-hpd-bridge.c:(.text.drm_aux_hpd_bridge_probe+0x20): undefined reference to `__devm_drm_bridge_alloc'
Add a dependency to force UCSI_LENOVO_YOGA_C630 to be a loadable module as
well in this configuration.
Fixes: eb90d36bfa06 ("usb: typec: ucsi: yoga-c630: register DRM HPD bridge")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250717133045.991254-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
1. In func configfs_composite_bind() -> composite_os_desc_req_prepare():
if kmalloc fails, the pointer cdev->os_desc_req will be freed but not
set to NULL. Then it will return a failure to the upper-level function.
2. in func configfs_composite_bind() -> composite_dev_cleanup():
it will checks whether cdev->os_desc_req is NULL. If it is not NULL, it
will attempt to use it.This will lead to a use-after-free issue.
BUG: KASAN: use-after-free in composite_dev_cleanup+0xf4/0x2c0
Read of size 8 at addr 0000004827837a00 by task init/1
CPU: 10 PID: 1 Comm: init Tainted: G O 5.10.97-oh #1
kasan_report+0x188/0x1cc
__asan_load8+0xb4/0xbc
composite_dev_cleanup+0xf4/0x2c0
configfs_composite_bind+0x210/0x7ac
udc_bind_to_driver+0xb4/0x1ec
usb_gadget_probe_driver+0xec/0x21c
gadget_dev_desc_UDC_store+0x264/0x27c
Fixes: 37a3a533429e ("usb: gadget: OS Feature Descriptors support")
Cc: stable <stable@kernel.org>
Signed-off-by: Tao Xue <xuetao09@huawei.com>
Link: https://lore.kernel.org/r/20250721093908.14967-1-xuetao09@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix a checkpatch warning:
CHECK: Please use a blank line after function/struct/union/enum declarations
Reported-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/36d1c961-319e-4457-bdc1-69f8b6bed33e@sabinyo.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Documentation/filesystems/sysfs.rst mentions that show() should only
use sysfs_emit() or sysfs_emit_at() when formating the value to be
returned to user space. So replace scnprintf() with sysfs_emit().
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Link: https://lore.kernel.org/r/20250718175037.299710-1-sumanth.gavini@yahoo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch cleans up a few cases where assignments were made
inside of if conditions, like
if ((rv = func()) < 0)
into two lines, to improve readability and be more in-line with
Linux kernel coding style. It also cleans up checkpatch warnings
like:
ERROR: do not use assignment in if condition
No functional change, just a style and maintainability fix.
Signed-off-by: Darshan Rathod <darshan.rathod@siqol.com>
Link: https://lore.kernel.org/r/20250718091045.264129-1-darshan.rathod@siqol.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix NULL pointer crash in uvcg_framebased_make due to uninitialized color
matching descriptor for frame-based format which was added in
commit f5e7bdd34aca ("usb: gadget: uvc: Allow creating new color matching
descriptors") that added handling for uncompressed and mjpeg format.
Crash is seen when userspace configuration (via configfs) does not
explicitly define the color matching descriptor. If color_matching is not
found, config_group_find_item() returns NULL. The code then jumps to
out_put_cm, where it calls config_item_put(color_matching);. If
color_matching is NULL, this will dereference a null pointer, leading to a
crash.
[ 2.746440] Unable to handle kernel NULL pointer dereference at virtual address 000000000000008c
[ 2.756273] Mem abort info:
[ 2.760080] ESR = 0x0000000096000005
[ 2.764872] EC = 0x25: DABT (current EL), IL = 32 bits
[ 2.771068] SET = 0, FnV = 0
[ 2.771069] EA = 0, S1PTW = 0
[ 2.771070] FSC = 0x05: level 1 translation fault
[ 2.771071] Data abort info:
[ 2.771072] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 2.771073] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 2.771074] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 2.771075] user pgtable: 4k pages, 39-bit VAs, pgdp=00000000a3e59000
[ 2.771077] [000000000000008c] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 2.771081] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
[ 2.771084] Dumping ftrace buffer:
[ 2.771085] (ftrace buffer empty)
[ 2.771138] CPU: 7 PID: 486 Comm: ln Tainted: G W E 6.6.58-android15
[ 2.771139] Hardware name: Qualcomm Technologies, Inc. SunP QRD HDK (DT)
[ 2.771140] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 2.771141] pc : __uvcg_fill_strm+0x198/0x2cc
[ 2.771145] lr : __uvcg_iter_strm_cls+0xc8/0x17c
[ 2.771146] sp : ffffffc08140bbb0
[ 2.771146] x29: ffffffc08140bbb0 x28: ffffff803bc81380 x27: ffffff8023bbd250
[ 2.771147] x26: ffffff8023bbd250 x25: ffffff803c361348 x24: ffffff803d8e6768
[ 2.771148] x23: 0000000000000004 x22: 0000000000000003 x21: ffffffc08140bc48
[ 2.771149] x20: 0000000000000000 x19: ffffffc08140bc48 x18: ffffffe9f8cf4a00
[ 2.771150] x17: 000000001bf64ec3 x16: 000000001bf64ec3 x15: ffffff8023bbd250
[ 2.771151] x14: 000000000000000f x13: 004c4b40000f4240 x12: 000a2c2a00051615
[ 2.771152] x11: 000000000000004f x10: ffffffe9f76b40ec x9 : ffffffe9f7e389d0
[ 2.771153] x8 : ffffff803d0d31ce x7 : 000f4240000a2c2a x6 : 0005161500028b0a
[ 2.771154] x5 : ffffff803d0d31ce x4 : 0000000000000003 x3 : 0000000000000000
[ 2.771155] x2 : ffffffc08140bc50 x1 : ffffffc08140bc48 x0 : 0000000000000000
[ 2.771156] Call trace:
[ 2.771157] __uvcg_fill_strm+0x198/0x2cc
[ 2.771157] __uvcg_iter_strm_cls+0xc8/0x17c
[ 2.771158] uvcg_streaming_class_allow_link+0x240/0x290
[ 2.771159] configfs_symlink+0x1f8/0x630
[ 2.771161] vfs_symlink+0x114/0x1a0
[ 2.771163] do_symlinkat+0x94/0x28c
[ 2.771164] __arm64_sys_symlinkat+0x54/0x70
[ 2.771164] invoke_syscall+0x58/0x114
[ 2.771166] el0_svc_common+0x80/0xe0
[ 2.771168] do_el0_svc+0x1c/0x28
[ 2.771169] el0_svc+0x3c/0x70
[ 2.771172] el0t_64_sync_handler+0x68/0xbc
[ 2.771173] el0t_64_sync+0x1a8/0x1ac
Initialize color matching descriptor for frame-based format to prevent
NULL pointer crash by mirroring the handling done for uncompressed and
mjpeg formats.
Fixes: 7b5a58952fc3 ("usb: gadget: uvc: configfs: Add frame-based frame format support")
Cc: stable <stable@kernel.org>
Signed-off-by: Akash Kumar <quic_akakum@quicinc.com>
Link: https://lore.kernel.org/r/20250718085138.1118788-1-quic_akakum@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On the devices that need their endpoints to get an
initial clear_halt, this needs to be done before
the devices can be opened. That means it needs to be
before the devices are registered.
Fixes: 15bf722e6f6c0 ("cdc-acm: Add support of ATOL FPrint fiscal printers")
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20250717141259.2345605-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When INTEL_PMT_TELEMETRY is in a loadable module, the discovery
test cannot be built-in:
x86_64-linux-ld: drivers/platform/x86/intel/pmt/discovery-kunit.o: in function `test_intel_pmt_get_regions_by_feature':
discovery-kunit.c:(.text+0x29d): undefined reference to `intel_pmt_get_regions_by_feature'
x86_64-linux-ld: discovery-kunit.c:(.text+0x2c3): undefined reference to `intel_pmt_put_feature_group'
Add a Kconfig dependency to prevent this.
Fixes: b9707d46a959 ("platform/x86/intel/pmt: KUNIT test for PMT Enhanced Discovery API")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250714081559.4056777-1-arnd@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
On g4x we currently use the 96MHz non-SSC refclk, which can't actually
generate an exact 2.7 Gbps link rate. In practice we end up with 2.688
Gbps which seems to be close enough to actually work, but link training
is currently failing due to miscalculating the DP_LINK_BW value (we
calcualte it directly from port_clock which reflects the actual PLL
outpout frequency).
Ideas how to fix this:
- nudge port_clock back up to 270000 during PLL computation/readout
- track port_clock and the nominal link rate separately so they might
differ a bit
- switch to the 100MHz refclk, but that one should be SSC so perhaps
not something we want
While we ponder about a better solution apply some band aid to the
immediate issue of miscalculated DP_LINK_BW value. With this
I can again use 2.7 Gbps link rate on g4x.
Cc: stable@vger.kernel.org
Fixes: 665a7b04092c ("drm/i915: Feed the DPLL output freq back into crtc_state")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250710201718.25310-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit a8b874694db5cae7baaf522756f87acd956e6e66)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Merge the fixes branch into the for-next branch to resolve Makefile
conflict and include the power supply accessor work that is required
by the upcoming Uniwill driver.
|
|
Commit 12724ce3fe1a ("iommu/vt-d: Optimize iotlb_sync_map for
non-caching/non-RWBF modes") dynamically set iotlb_sync_map. This causes
synchronization issues due to lack of locking on map and attach paths,
racing iommufd userspace operations.
Invalidation changes must precede device attachment to ensure all flushes
complete before hardware walks page tables, preventing coherence issues.
Make domain->iotlb_sync_map static, set once during domain allocation. If
an IOMMU requires iotlb_sync_map but the domain lacks it, attach is
rejected. This won't reduce domain sharing: RWBF and shadowing page table
caching are legacy uses with legacy hardware. Mixed configs (some IOMMUs
in caching mode, others not) are unlikely in real-world scenarios.
Fixes: 12724ce3fe1a ("iommu/vt-d: Optimize iotlb_sync_map for non-caching/non-RWBF modes")
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20250721051657.1695788-1-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If the BIOS sets a _PPC frequency limit upfront, it will fail to take
effect due to a call ordering issue. Namely, freq_qos_update_request()
is called before freq_qos_add_request() for the given request causing
the constraint update to be ignored. The call sequence in question is
as follows:
cpufreq_policy_online()
acpi_cpufreq_cpu_init()
acpi_processor_register_performance()
acpi_processor_get_performance_info()
acpi_processor_get_platform_limit()
freq_qos_update_request(&perflib_req) <- inactive QoS request
blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
CPUFREQ_CREATE_POLICY)
acpi_processor_notifier()
acpi_processor_ppc_init()
freq_qos_add_request(&perflib_req) <- QoS request activation
Address this by adding an acpi_processor_get_platform_limit() call
to acpi_processor_ppc_init(), after the perflib_req activation via
freq_qos_add_request(), which causes the initial _PPC limit to be
picked up as appropriate. However, also ensure that the _PPC limit
will not be picked up in the cases when the cpufreq driver does not
call acpi_processor_register_performance() by adding a pr->performance
check to the related_cpus loop in acpi_processor_ppc_init().
Fixes: d15ce412737a ("ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier")
Signed-off-by: Jiayi Li <lijiayi@kylinos.cn>
Link: https://patch.msgid.link/20250721032606.3459369-1-lijiayi@kylinos.cn
[ rjw: Consolidate pr-related checks in acpi_processor_ppc_init() ]
[ rjw: Subject and changelog adjustments ]
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+: 2d8b39a62a5d ACPI: processor: Avoid NULL pointer dereferences at init time
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+: 3000ce3c52f8 cpufreq: Use per-policy frequency QoS
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+: a1bb46c36ce3 ACPI: processor: Add QoS requests for all CPUs
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add LUT entry for MSI/IOMMU in Endpoint mode by calling
imx_pcie_add_lut_by_rid() helper function. Since only one physical function
is supported in the Endpoint mode for now, '0' is passed as the Device ID.
This sets up a single LUT entry required for MSI/IOMMU.
The Endpoint function can operate without LUT configuration if neither
IOMMU nor MSI is used by the platform. This LUT configuration is used for
the EP doorbell feature by allowing the Root Complex to trigger the
doorbell on the Endpoint with the help of the Endpoint MSI controller.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[mani: reworded the comments & commit message and dropped tested-by tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250710-ep-msi-v21-2-57683fc7fb25@nxp.com
|
|
Add helper function imx_pcie_add_lut_by_rid(), which will be used by the
upcoming LUT configuration for MSI/IOMMU in the Endpoint mode. No
functional change.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[mani: reworded commit message and dropped tested-by tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250710-ep-msi-v21-1-57683fc7fb25@nxp.com
|
|
This sensors are currently controlled from userspace, ideally
we will add full drivers in the future.
Signed-off-by: Heiko Schocher <hs@denx.de>
Link: https://patch.msgid.link/20250719063355.73111-3-hs@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
