| Age | Commit message (Collapse) | Author |
|---|
|
Validate port value provided by the user and with that remove no longer
needed validation by the driver. The missing check in the mlx5_ib driver
could cause to the below oops.
Call trace:
_create_flow_rule+0x2d4/0xf28 [mlx5_ib]
mlx5_ib_create_flow+0x2d0/0x5b0 [mlx5_ib]
ib_uverbs_ex_create_flow+0x4cc/0x624 [ib_uverbs]
ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xd4/0x150 [ib_uverbs]
ib_uverbs_cmd_verbs.isra.7+0xb28/0xc50 [ib_uverbs]
ib_uverbs_ioctl+0x158/0x1d0 [ib_uverbs]
do_vfs_ioctl+0xd0/0xaf0
ksys_ioctl+0x84/0xb4
__arm64_sys_ioctl+0x28/0xc4
el0_svc_common.constprop.3+0xa4/0x254
el0_svc_handler+0x84/0xa0
el0_svc+0x10/0x26c
Code: b9401260 f9615681 51000400 8b001c20 (f9403c1a)
Fixes: 436f2ad05a0b ("IB/core: Export ib_create/destroy_flow through uverbs")
Link: https://lore.kernel.org/r/faad30dc5219a01727f47db3dc2f029d07c82c00.1623309971.git.leonro@nvidia.com
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This patch eliminates the following smatch warning:
drivers/gpu/drm/drm_auth.c:320 drm_master_release() warn: unlocked access 'master' (line 318) expected lock '&dev->master_mutex'
The 'file_priv->master' field should be protected by the mutex lock to
'&dev->master_mutex'. This is because other processes can concurrently
modify this field and free the current 'file_priv->master'
pointer. This could result in a use-after-free error when 'master' is
dereferenced in subsequent function calls to
'drm_legacy_lock_master_cleanup()' or to 'drm_lease_revoke()'.
An example of a scenario that would produce this error can be seen
from a similar bug in 'drm_getunique()' that was reported by Syzbot:
https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803
In the Syzbot report, another process concurrently acquired the
device's master mutex in 'drm_setmaster_ioctl()', then overwrote
'fpriv->master' in 'drm_new_set_master()'. The old value of
'fpriv->master' was subsequently freed before the mutex was unlocked.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609092119.173590-1-desmondcheongzx@gmail.com
|
|
The QFN20 part has a different GPIO/port function assignment. The
configuration struct bit field ordered as TX/RX/RS485/WAKEUP/CLK
which exactly matches GPIO0-3 for QFN24/28. However, QFN20 has a
different GPIO to primary function assignment.
Special case QFN20 to follow to properly detect which GPIOs are
available.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://lore.kernel.org/r/51830b2b24118eb0f77c5c9ac64ffb2f519dbb1d.1622218300.git.stefan@agner.ch
Fixes: c8acfe0aadbe ("USB: serial: cp210x: implement GPIO support for CP2102N")
Cc: stable@vger.kernel.org # 4.19
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The device is able to offload either the outer header csum or inner
header csum. The driver utilizes the inner csum offload. So, prohibit
setting of tx-gre-csum-segmentation and let it be: off[fixed].
Fixes: 2729984149e6 ("net/mlx5e: Support TSO and TX checksum offloads for GRE tunnels")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The device is able to offload either the outer header csum or inner
header csum. The driver utilizes the inner csum offload. Hence, block
setting of tx-udp_tnl-csum-segmentation and set it to off[fixed].
Fixes: b49663c8fb49 ("net/mlx5e: Add support for UDP tunnel segmentation with outer checksum offload")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In the scenario described below, an EQ can remain in FIRED state which
can result in missing an interrupt generation.
The scenario:
device mlx5_core driver
------ ----------------
EQ1.eqe generated
EQ1.MSI-X sent
EQ1.state = FIRED
EQ2.eqe generated
mlx5_irq()
polls - eq1_eqes()
arm eq1
polls - eq2_eqes()
arm eq2
EQ2.MSI-X sent
EQ2.state = FIRED
mlx5_irq()
polls - eq2_eqes() -- no eqes found
driver skips EQ arming;
->EQ2 remains fired, misses generating interrupt.
Hence, always arm the EQ by reverting the cited commit in fixes tag.
Fixes: d894892dda25 ("net/mlx5: Arm only EQs with EQEs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Steering packets to PTP-SQ should be done only if the SKB has
SKBTX_HW_TSTAMP set in the tx_flags. While here, take the function into
a header and inline it.
Set the whole condition to select the PTP-SQ to unlikely.
Fixes: 24c22dd0918b ("net/mlx5e: Add states to PTP channel")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Since the driver opens the PTP-RQ under channel 0, it appears to the
stack as if the SKB was received on rxq0. So from thew stack POV there
are still the same number of RX queues.
Fixes: 960fbfe222a4 ("net/mlx5e: Allow coexistence of CQE compression and HW TS PTP")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When changing eswitch mode, the netdev is detached from the
hardware resources. So verify dev is present in get devlink
port ndo. Otherwise, we will hit the following panic:
[241535.973539] RIP: 0010:__devlink_port_phys_port_name_get+0x13/0x1b0
[241535.976471] RSP: 0018:ffff9eaf0ae1b7c8 EFLAGS: 00010292
[241535.977471] RAX: 000000000002d370 RBX: 000000000002d370 RCX: 0000000000000000
[241535.978479] RDX: 0000000000000010 RSI: ffff9eaf0ae1b858 RDI: 000000000002d370
[241535.979482] RBP: ffff9eaf0ae1b7e0 R08: 000000000000002a R09: ffff8888d54d13da
[241535.980486] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8888e6700000
[241535.981491] R13: ffff9eaf0ae1b858 R14: 0000000000000010 R15: 0000000000000000
[241535.982489] FS: 00007fd374ef3740(0000) GS:ffff88909ea00000(0000) knlGS:0000000000000000
[241535.983494] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[241535.984487] CR2: 000000000002d444 CR3: 000000089fd26006 CR4: 00000000003706e0
[241535.985502] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[241535.986499] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[241535.987477] Call Trace:
[241535.988426] ? nla_put_64bit+0x71/0xa0
[241535.989368] devlink_compat_phys_port_name_get+0x50/0xa0
[241535.990312] dev_get_phys_port_name+0x4b/0x60
[241535.991252] rtnl_fill_ifinfo+0x57b/0xcb0
[241535.992192] rtnl_dump_ifinfo+0x58f/0x6d0
[241535.993123] ? ksize+0x14/0x20
[241535.994033] ? __alloc_skb+0xe8/0x250
[241535.994935] netlink_dump+0x17c/0x300
[241535.995821] netlink_recvmsg+0x1de/0x2c0
[241535.996677] sock_recvmsg+0x70/0x80
[241535.997518] ____sys_recvmsg+0x9b/0x1b0
[241535.998360] ? iovec_from_user+0x82/0x120
[241535.999202] ? __import_iovec+0x2c/0x130
[241536.000031] ___sys_recvmsg+0x94/0x130
[241536.000850] ? __handle_mm_fault+0x56d/0x6e0
[241536.001668] __sys_recvmsg+0x5f/0xb0
[241536.002464] ? syscall_enter_from_user_mode+0x2b/0x80
[241536.003242] __x64_sys_recvmsg+0x1f/0x30
[241536.004008] do_syscall_64+0x38/0x50
[241536.004767] entry_SYSCALL_64_after_hwframe+0x44/0xae
[241536.005532] RIP: 0033:0x7fd375014f47
Fixes: 2ff349c5edfe ("net/mlx5e: Verify dev is present in some ndos")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
SW steering uses RC QP to write/read to/from ICM, hence it's not
supported when RoCE is not supported as well.
Fixes: 70605ea545e8 ("net/mlx5: DR, Expose APIs for direct rule managing")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Check if RoCE is supported by the device before enable it in
the vport context and create all the RDMA steering objects.
Fixes: 80f09dfc237f ("net/mlx5: Eswitch, enable RoCE loopback traffic")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When adding a hairpin flow, a firmware-side send queue is created for
the peer net device, which claims some host memory pages for its
internal ring buffer. If the peer net device is removed/unbound before
the hairpin flow is deleted, then the send queue is not destroyed which
leads to a stack trace on pci device remove:
[ 748.005230] mlx5_core 0000:08:00.2: wait_func:1094:(pid 12985): MANAGE_PAGES(0x108) timeout. Will cause a leak of a command resource
[ 748.005231] mlx5_core 0000:08:00.2: reclaim_pages:514:(pid 12985): failed reclaiming pages: err -110
[ 748.001835] mlx5_core 0000:08:00.2: mlx5_reclaim_root_pages:653:(pid 12985): failed reclaiming pages (-110) for func id 0x0
[ 748.002171] ------------[ cut here ]------------
[ 748.001177] FW pages counter is 4 after reclaiming all pages
[ 748.001186] WARNING: CPU: 1 PID: 12985 at drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:685 mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core] [ +0.002771] Modules linked in: cls_flower mlx5_ib mlx5_core ptp pps_core act_mirred sch_ingress openvswitch nsh xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_umad ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay fuse [last unloaded: pps_core]
[ 748.007225] CPU: 1 PID: 12985 Comm: tee Not tainted 5.12.0+ #1
[ 748.001376] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 748.002315] RIP: 0010:mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core]
[ 748.001679] Code: 28 00 00 00 0f 85 22 01 00 00 48 81 c4 b0 00 00 00 31 c0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 c7 c7 40 cc 19 a1 e8 9f 71 0e e2 <0f> 0b e9 30 ff ff ff 48 c7 c7 a0 cc 19 a1 e8 8c 71 0e e2 0f 0b e9
[ 748.003781] RSP: 0018:ffff88815220faf8 EFLAGS: 00010286
[ 748.001149] RAX: 0000000000000000 RBX: ffff8881b4900280 RCX: 0000000000000000
[ 748.001445] RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffffed102a441f51
[ 748.001614] RBP: 00000000000032b9 R08: 0000000000000001 R09: ffffed1054a15ee8
[ 748.001446] R10: ffff8882a50af73b R11: ffffed1054a15ee7 R12: fffffbfff07c1e30
[ 748.001447] R13: dffffc0000000000 R14: ffff8881b492cba8 R15: 0000000000000000
[ 748.001429] FS: 00007f58bd08b580(0000) GS:ffff8882a5080000(0000) knlGS:0000000000000000
[ 748.001695] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 748.001309] CR2: 000055a026351740 CR3: 00000001d3b48006 CR4: 0000000000370ea0
[ 748.001506] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 748.001483] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 748.001654] Call Trace:
[ 748.000576] ? mlx5_satisfy_startup_pages+0x290/0x290 [mlx5_core]
[ 748.001416] ? mlx5_cmd_teardown_hca+0xa2/0xd0 [mlx5_core]
[ 748.001354] ? mlx5_cmd_init_hca+0x280/0x280 [mlx5_core]
[ 748.001203] mlx5_function_teardown+0x30/0x60 [mlx5_core]
[ 748.001275] mlx5_uninit_one+0xa7/0xc0 [mlx5_core]
[ 748.001200] remove_one+0x5f/0xc0 [mlx5_core]
[ 748.001075] pci_device_remove+0x9f/0x1d0
[ 748.000833] device_release_driver_internal+0x1e0/0x490
[ 748.001207] unbind_store+0x19f/0x200
[ 748.000942] ? sysfs_file_ops+0x170/0x170
[ 748.001000] kernfs_fop_write_iter+0x2bc/0x450
[ 748.000970] new_sync_write+0x373/0x610
[ 748.001124] ? new_sync_read+0x600/0x600
[ 748.001057] ? lock_acquire+0x4d6/0x700
[ 748.000908] ? lockdep_hardirqs_on_prepare+0x400/0x400
[ 748.001126] ? fd_install+0x1c9/0x4d0
[ 748.000951] vfs_write+0x4d0/0x800
[ 748.000804] ksys_write+0xf9/0x1d0
[ 748.000868] ? __x64_sys_read+0xb0/0xb0
[ 748.000811] ? filp_open+0x50/0x50
[ 748.000919] ? syscall_enter_from_user_mode+0x1d/0x50
[ 748.001223] do_syscall_64+0x3f/0x80
[ 748.000892] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 748.001026] RIP: 0033:0x7f58bcfb22f7
[ 748.000944] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
[ 748.003925] RSP: 002b:00007fffd7f2aaa8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 748.001732] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f58bcfb22f7
[ 748.001426] RDX: 000000000000000d RSI: 00007fffd7f2abc0 RDI: 0000000000000003
[ 748.001746] RBP: 00007fffd7f2abc0 R08: 0000000000000000 R09: 0000000000000001
[ 748.001631] R10: 00000000000001b6 R11: 0000000000000246 R12: 000000000000000d
[ 748.001537] R13: 00005597ac2c24a0 R14: 000000000000000d R15: 00007f58bd084700
[ 748.001564] irq event stamp: 0
[ 748.000787] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[ 748.001399] hardirqs last disabled at (0): [<ffffffff813132cf>] copy_process+0x146f/0x5eb0
[ 748.001854] softirqs last enabled at (0): [<ffffffff8131330e>] copy_process+0x14ae/0x5eb0
[ 748.013431] softirqs last disabled at (0): [<0000000000000000>] 0x0
[ 748.001492] ---[ end trace a6fabd773d1c51ae ]---
Fix by destroying the send queue of a hairpin peer net device that is
being removed/unbound, which returns the allocated ring buffer pages to
the host.
Fixes: 4d8fcf216c90 ("net/mlx5e: Avoid unbounded peer devices when unpairing TC hairpin rules")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, IPsec feature is disabled because mlx5e_build_nic_netdev
is required to be called after mlx5e_ipsec_init. This requirement is
invalid as mlx5e_build_nic_netdev and mlx5e_ipsec_init initialize
independent resources.
Remove ipsec pointer check in mlx5e_build_nic_netdev so that the
two functions can be called at any order.
Fixes: 547eede070eb ("net/mlx5e: IPSec, Innova IPSec offload infrastructure")
Signed-off-by: Huy Nguyen <huyn@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Function mlx5e_rep_neigh_update() wasn't updated to accommodate rtnl lock
removal from TC filter update path and properly handle concurrent encap
entry insertion/deletion which can lead to following use-after-free:
[23827.464923] ==================================================================
[23827.469446] BUG: KASAN: use-after-free in mlx5e_encap_take+0x72/0x140 [mlx5_core]
[23827.470971] Read of size 4 at addr ffff8881d132228c by task kworker/u20:6/21635
[23827.472251]
[23827.472615] CPU: 9 PID: 21635 Comm: kworker/u20:6 Not tainted 5.13.0-rc3+ #5
[23827.473788] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[23827.475639] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core]
[23827.476731] Call Trace:
[23827.477260] dump_stack+0xbb/0x107
[23827.477906] print_address_description.constprop.0+0x18/0x140
[23827.478896] ? mlx5e_encap_take+0x72/0x140 [mlx5_core]
[23827.479879] ? mlx5e_encap_take+0x72/0x140 [mlx5_core]
[23827.480905] kasan_report.cold+0x7c/0xd8
[23827.481701] ? mlx5e_encap_take+0x72/0x140 [mlx5_core]
[23827.482744] kasan_check_range+0x145/0x1a0
[23827.493112] mlx5e_encap_take+0x72/0x140 [mlx5_core]
[23827.494054] ? mlx5e_tc_tun_encap_info_equal_generic+0x140/0x140 [mlx5_core]
[23827.495296] mlx5e_rep_neigh_update+0x41e/0x5e0 [mlx5_core]
[23827.496338] ? mlx5e_rep_neigh_entry_release+0xb80/0xb80 [mlx5_core]
[23827.497486] ? read_word_at_a_time+0xe/0x20
[23827.498250] ? strscpy+0xa0/0x2a0
[23827.498889] process_one_work+0x8ac/0x14e0
[23827.499638] ? lockdep_hardirqs_on_prepare+0x400/0x400
[23827.500537] ? pwq_dec_nr_in_flight+0x2c0/0x2c0
[23827.501359] ? rwlock_bug.part.0+0x90/0x90
[23827.502116] worker_thread+0x53b/0x1220
[23827.502831] ? process_one_work+0x14e0/0x14e0
[23827.503627] kthread+0x328/0x3f0
[23827.504254] ? _raw_spin_unlock_irq+0x24/0x40
[23827.505065] ? __kthread_bind_mask+0x90/0x90
[23827.505912] ret_from_fork+0x1f/0x30
[23827.506621]
[23827.506987] Allocated by task 28248:
[23827.507694] kasan_save_stack+0x1b/0x40
[23827.508476] __kasan_kmalloc+0x7c/0x90
[23827.509197] mlx5e_attach_encap+0xde1/0x1d40 [mlx5_core]
[23827.510194] mlx5e_tc_add_fdb_flow+0x397/0xc40 [mlx5_core]
[23827.511218] __mlx5e_add_fdb_flow+0x519/0xb30 [mlx5_core]
[23827.512234] mlx5e_configure_flower+0x191c/0x4870 [mlx5_core]
[23827.513298] tc_setup_cb_add+0x1d5/0x420
[23827.514023] fl_hw_replace_filter+0x382/0x6a0 [cls_flower]
[23827.514975] fl_change+0x2ceb/0x4a51 [cls_flower]
[23827.515821] tc_new_tfilter+0x89a/0x2070
[23827.516548] rtnetlink_rcv_msg+0x644/0x8c0
[23827.517300] netlink_rcv_skb+0x11d/0x340
[23827.518021] netlink_unicast+0x42b/0x700
[23827.518742] netlink_sendmsg+0x743/0xc20
[23827.519467] sock_sendmsg+0xb2/0xe0
[23827.520131] ____sys_sendmsg+0x590/0x770
[23827.520851] ___sys_sendmsg+0xd8/0x160
[23827.521552] __sys_sendmsg+0xb7/0x140
[23827.522238] do_syscall_64+0x3a/0x70
[23827.522907] entry_SYSCALL_64_after_hwframe+0x44/0xae
[23827.523797]
[23827.524163] Freed by task 25948:
[23827.524780] kasan_save_stack+0x1b/0x40
[23827.525488] kasan_set_track+0x1c/0x30
[23827.526187] kasan_set_free_info+0x20/0x30
[23827.526968] __kasan_slab_free+0xed/0x130
[23827.527709] slab_free_freelist_hook+0xcf/0x1d0
[23827.528528] kmem_cache_free_bulk+0x33a/0x6e0
[23827.529317] kfree_rcu_work+0x55f/0xb70
[23827.530024] process_one_work+0x8ac/0x14e0
[23827.530770] worker_thread+0x53b/0x1220
[23827.531480] kthread+0x328/0x3f0
[23827.532114] ret_from_fork+0x1f/0x30
[23827.532785]
[23827.533147] Last potentially related work creation:
[23827.534007] kasan_save_stack+0x1b/0x40
[23827.534710] kasan_record_aux_stack+0xab/0xc0
[23827.535492] kvfree_call_rcu+0x31/0x7b0
[23827.536206] mlx5e_tc_del_fdb_flow+0x577/0xef0 [mlx5_core]
[23827.537305] mlx5e_flow_put+0x49/0x80 [mlx5_core]
[23827.538290] mlx5e_delete_flower+0x6d1/0xe60 [mlx5_core]
[23827.539300] tc_setup_cb_destroy+0x18e/0x2f0
[23827.540144] fl_hw_destroy_filter+0x1d2/0x310 [cls_flower]
[23827.541148] __fl_delete+0x4dc/0x660 [cls_flower]
[23827.541985] fl_delete+0x97/0x160 [cls_flower]
[23827.542782] tc_del_tfilter+0x7ab/0x13d0
[23827.543503] rtnetlink_rcv_msg+0x644/0x8c0
[23827.544257] netlink_rcv_skb+0x11d/0x340
[23827.544981] netlink_unicast+0x42b/0x700
[23827.545700] netlink_sendmsg+0x743/0xc20
[23827.546424] sock_sendmsg+0xb2/0xe0
[23827.547084] ____sys_sendmsg+0x590/0x770
[23827.547850] ___sys_sendmsg+0xd8/0x160
[23827.548606] __sys_sendmsg+0xb7/0x140
[23827.549303] do_syscall_64+0x3a/0x70
[23827.549969] entry_SYSCALL_64_after_hwframe+0x44/0xae
[23827.550853]
[23827.551217] The buggy address belongs to the object at ffff8881d1322200
[23827.551217] which belongs to the cache kmalloc-256 of size 256
[23827.553341] The buggy address is located 140 bytes inside of
[23827.553341] 256-byte region [ffff8881d1322200, ffff8881d1322300)
[23827.555747] The buggy address belongs to the page:
[23827.556847] page:00000000898762aa refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1d1320
[23827.558651] head:00000000898762aa order:2 compound_mapcount:0 compound_pincount:0
[23827.559961] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff)
[23827.561243] raw: 002ffff800010200 dead000000000100 dead000000000122 ffff888100042b40
[23827.562653] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
[23827.564112] page dumped because: kasan: bad access detected
[23827.565439]
[23827.565932] Memory state around the buggy address:
[23827.566917] ffff8881d1322180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[23827.568485] ffff8881d1322200: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[23827.569818] >ffff8881d1322280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[23827.571143] ^
[23827.571879] ffff8881d1322300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[23827.573283] ffff8881d1322380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[23827.574654] ==================================================================
Most of the necessary logic is already correctly implemented by
mlx5e_get_next_valid_encap() helper that is used in neigh stats update
handler. Make the handler generic by renaming it to
mlx5e_get_next_matching_encap() and use callback to test whether flow is
matching instead of hardcoded check for 'valid' flag value. Implement
mlx5e_get_next_valid_encap() by calling mlx5e_get_next_matching_encap()
with callback that tests encap MLX5_ENCAP_ENTRY_VALID flag. Implement new
mlx5e_get_next_init_encap() helper by calling
mlx5e_get_next_matching_encap() with callback that tests encap completion
result to be non-error and use it in mlx5e_rep_neigh_update() to safely
iterate over nhe->encap_list.
Remove encap completion logic from mlx5e_rep_update_flows() since the encap
entries passed to this function are already guaranteed to be properly
initialized by similar code in mlx5e_get_next_init_encap().
Fixes: 2a1f1768fa17 ("net/mlx5e: Refactor neigh update for concurrent execution")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When the code execute 'if (!priv->fs.arfs->wq)', the value of err is 0.
So, we use -ENOMEM to indicate that the function
create_singlethread_workqueue() return NULL.
Clean up smatch warning:
drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c:373
mlx5e_arfs_create_tables() warn: missing error code 'err'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: f6755b80d693 ("net/mlx5e: Dynamic alloc arfs table for netdev when needed")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-06-09
This series contains updates to ice driver only.
Maciej informs the user when XDP is not supported due to the driver
being in the 'safe mode' state. He also adds a parameter to Tx queue
configuration to resolve an issue in configuring XDP queues as it cannot
rely on using the number Tx or Rx queues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Assorted pdx86 bug-fixes and some hardware-id additions for 5.13.
The mlxreg-hotplug revert is a regression-fix"
* tag 'platform-drivers-x86-v5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/mellanox: mlxreg-hotplug: Revert "move to use request_irq by IRQF_NO_AUTOEN flag"
platform/surface: dtx: Add missing mutex_destroy() call in failure path
platform/surface: aggregator: Fix event disable function
platform/x86: thinkpad_acpi: Add X1 Carbon Gen 9 second fan support
platform/surface: aggregator_registry: Add support for 13" Intel Surface Laptop 4
platform/surface: aggregator_registry: Update comments for 15" AMD Surface Laptop 4
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes berg says:
====================
A fair number of fixes:
* fix more fallout from RTNL locking changes
* fixes for some of the bugs found by syzbot
* drop multicast fragments in mac80211 to align
with the spec and what drivers are doing now
* fix NULL-ptr deref in radiotap injection
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit ae15e0ba1b33 ("ice: Change number of XDP Tx queues to match
number of Rx queues") tried to address the incorrect setting of XDP
queue count that was based on the Tx queue count, whereas in theory we
should provide the XDP queue per Rx queue. However, the routines that
setup and destroy the set of Tx resources are still based on the
vsi->num_txq.
Ice supports the asynchronous Tx/Rx queue count, so for a setup where
vsi->num_txq > vsi->num_rxq, ice_vsi_stop_tx_rings and ice_vsi_cfg_txqs
will be accessing the vsi->xdp_rings out of the bounds.
Parameterize two mentioned functions so they get the size of Tx resources
array as the input.
Fixes: ae15e0ba1b33 ("ice: Change number of XDP Tx queues to match number of Rx queues")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ice driver requires a programmable pipeline firmware package in order to
have a support for advanced features. Otherwise, driver falls back to so
called 'safe mode'. For that mode, ndo_bpf callback is not exposed and
when user tries to load XDP program, the following happens:
$ sudo ./xdp1 enp179s0f1
libbpf: Kernel error message: Underlying driver does not support XDP in native mode
link set xdp fd failed
which is sort of confusing, as there is a native XDP support, but not in
the current mode. Improve the user experience by providing the specific
ndo_bpf callback dedicated for safe mode which will make use of extack
to explicitly let the user know that the DDP package is missing and
that's the reason that the XDP can't be loaded onto interface currently.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Fixes: efc2214b6047 ("ice: Add support for XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The scpi hwmon shows the sub-zero temperature in an unsigned integer,
which would confuse the users when the machine works in low temperature
environment. This shows the sub-zero temperature in an signed value and
users can get it properly from sensors.
Signed-off-by: Riwen Lu <luriwen@kylinos.cn>
Tested-by: Xin Chen <chenxin@kylinos.cn>
Link: https://lore.kernel.org/r/20210604030959.736379-1-luriwen@kylinos.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
During standby some PSUs turn off the microcontroller. A re-init is
required during resume or the microcontroller stays unresponsive.
Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver")
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/YLjCJiVtu5zgTabI@monster.powergraphx.local
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
aspm (Active State Power Management)
rtsx_comm_set_aspm: this function is for driver to make sure
not enter power saving when processing of init and card_detcct
ASPM_MODE_CFG: 8411 5209 5227 5229 5249 5250
Change back to use original way to control aspm
ASPM_MODE_REG: 5227A 524A 5250A 5260 5261 5228
Keep the new way to control aspm
Fixes: 121e9c6b5c4c ("misc: rtsx: modify and fix init_hw function")
Reported-by: Chris Chiu <chris.chiu@canonical.com>
Tested-by: Gordon Lack <gordon.lack@dsl.pipex.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20210607101634.4948-1-ricky_wu@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes crash after resuming from hibernation. The issue
occurs when mhi stack is builtin and so part of the 'restore-kernel',
causing the device to be resumed from 'restored kernel' with a no
more valid context (memory mappings etc...) and leading to spurious
crashes.
This patch fixes the issue by implementing proper freeze/restore
callbacks.
Link: https://lore.kernel.org/r/1622571445-4505-1-git-send-email-loic.poulain@linaro.org
Reported-by: Shujun Wang <wsj20369@163.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210606153741.20725-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.
Link: https://lore.kernel.org/r/20210413160318.2003699-1-weiyongjun1@huawei.com
Fixes: 8562d4fe34a3 ("mhi: pci_generic: Add health-check")
Cc: stable <stable@vger.kernel.org>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Hemant kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210606153741.20725-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
According to MHI v1.1 specification, change the channel name of T99W175
from "AT" to "DUN" (Dial-up networking) for both channel 32 and 33,
so that the channels can be bound to the Qcom WWAN control driver, and
device node such as /dev/wwan0p3DUN will be generated, which is very useful
for debugging modem
Link: https://lore.kernel.org/r/20210429014226.21017-1-jarvis.w.jiang@gmail.com
[mani: changed the dev node to /dev/wwan0p3DUN]
Fixes: aac426562f56 ("bus: mhi: pci_generic: Introduce Foxconn T99W175 support")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Jarvis Jiang <jarvis.w.jiang@gmail.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210606153741.20725-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It's possible that during ->exit() the private_data is NULL,
for instance when there was no GPIO device instantiated.
Due to this we may not dereference it. Add a respective check.
Note, for now ->exit() only makes sense when GPIO device
was instantiated, that's why we may use the check for entire
function.
Fixes: 81171e7d31a6 ("serial: 8250_exar: Constify the software nodes")
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20210608144239.12697-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 719e1f561afb ("ACPI: Execute platform _OSC also with query bit
clear") makes acpi_bus_osc_negotiate_platform_control() not only query
the platforms capabilities but it also commits the result back to the
firmware to report which capabilities are supported by the OS back to
the firmware
On certain systems the BIOS loads SSDT tables dynamically based on the
capabilities the OS claims to support. However, on these systems the
_OSC actually clears some of the bits (under certain conditions) so what
happens is that now when we call the _OSC twice the second time we pass
the cleared values and that results errors like below to appear on the
system log:
ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210105/psargs-330)
ACPI Error: Aborting method \_PR.PR01._CPC due to previous error (AE_NOT_FOUND) (20210105/psparse-529)
In addition the ACPI 6.4 spec says following [1]:
If the OS declares support of a feature in the Support Field in one
call to _OSC, then it must preserve the set state of that bit
(declaring support for that feature) in all subsequent calls.
Based on the above we can fix the issue by passing the same set of
capabilities to the platform wide _OSC in both calls regardless of the
query flag.
While there drop the context.ret.length checks which were wrong to begin
with (as the length is number of bytes not elements). This is already
checked in acpi_run_osc() that also returns an error in that case.
Includes fixes by Hans de Goede.
[1] https://uefi.org/specs/ACPI/6.4/06_Device_Configuration/Device_Configuration.html#sequence-of-osc-calls
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213023
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1963717
Fixes: 719e1f561afb ("ACPI: Execute platform _OSC also with query bit clear")
Cc: 5.12+ <stable@vger.kernel.org> # 5.12+
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The calclulation of how many bytes we stuff into the
DSI pipeline for video mode panels is off by three
orders of magnitude because we did not account for the
fact that the DRM mode clock is in kilohertz rather
than hertz.
This used to be:
drm_mode_vrefresh(mode) * mode->htotal * mode->vtotal
which would become for example for s6e63m0:
60 x 514 x 831 = 25628040 Hz, but mode->clock is
25628 as it is in kHz.
This affects only the Samsung GT-I8190 "Golden" phone
right now since it is the only MCDE device with a video
mode display.
Curiously some specimen work with this code and wild
settings in the EOL and empty packets at the end of the
display, but I have noticed an eeire flicker until now.
Others were not so lucky and got black screens.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Fixes: 920dd1b1425b ("drm/mcde: Use mode->clock instead of reverse calculating it from the vrefresh")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608213318.3897858-1-linus.walleij@linaro.org
|
|
It's currently not possible to select the SC8180x TLMM driver, due to it
selecting PINCTRL_MSM, rather than depending on the same. Fix this.
Fixes: 97423113ec4b ("pinctrl: qcom: Add sc8180x TLMM driver")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210608180702.2064253-1-bjorn.andersson@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Lars did not write the ralink-gdma driver. Looks like his name just got
copy&pasted from another similar DMA driver. Remove his name from the
copyright and MODULE_AUTHOR.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210607100119.26983-1-lars@metafoo.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The sinfo.pertid and sinfo.generation variables are not initialized and
it causes a crash when we use this as a wireless access point.
[ 456.873025] ------------[ cut here ]------------
[ 456.878198] kernel BUG at mm/slub.c:3968!
[ 456.882680] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
[ snip ]
[ 457.271004] Backtrace:
[ 457.273733] [<c02b7ee4>] (kfree) from [<c0e2a470>] (nl80211_send_station+0x954/0xfc4)
[ 457.282481] r9:eccca0c0 r8:e8edfec0 r7:00000000 r6:00000011 r5:e80a9480 r4:e8edfe00
[ 457.291132] [<c0e29b1c>] (nl80211_send_station) from [<c0e2b18c>] (cfg80211_new_sta+0x90/0x1cc)
[ 457.300850] r10:e80a9480 r9:e8edfe00 r8:ea678cca r7:00000a20 r6:00000000 r5:ec46d000
[ 457.309586] r4:ec46d9e0
[ 457.312433] [<c0e2b0fc>] (cfg80211_new_sta) from [<bf086684>] (rtw_cfg80211_indicate_sta_assoc+0x80/0x9c [r8723bs])
[ 457.324095] r10:00009930 r9:e85b9d80 r8:bf091050 r7:00000000 r6:00000000 r5:0000001c
[ 457.332831] r4:c1606788
[ 457.335692] [<bf086604>] (rtw_cfg80211_indicate_sta_assoc [r8723bs]) from [<bf03df38>] (rtw_stassoc_event_callback+0x1c8/0x1d4 [r8723bs])
[ 457.349489] r7:ea678cc0 r6:000000a1 r5:f1225f84 r4:f086b000
[ 457.355845] [<bf03dd70>] (rtw_stassoc_event_callback [r8723bs]) from [<bf048e4c>] (mlme_evt_hdl+0x8c/0xb4 [r8723bs])
[ 457.367601] r7:c1604900 r6:f086c4b8 r5:00000000 r4:f086c000
[ 457.373959] [<bf048dc0>] (mlme_evt_hdl [r8723bs]) from [<bf03693c>] (rtw_cmd_thread+0x198/0x3d8 [r8723bs])
[ 457.384744] r5:f086e000 r4:f086c000
[ 457.388754] [<bf0367a4>] (rtw_cmd_thread [r8723bs]) from [<c014a214>] (kthread+0x170/0x174)
[ 457.398083] r10:ed7a57e8 r9:bf0367a4 r8:f086b000 r7:e8ede000 r6:00000000 r5:e9975200
[ 457.406828] r4:e8369900
[ 457.409653] [<c014a0a4>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
[ 457.417718] Exception stack(0xe8edffb0 to 0xe8edfff8)
[ 457.423356] ffa0: 00000000 00000000 00000000 00000000
[ 457.432492] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 457.441618] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 457.449006] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c014a0a4
[ 457.457750] r4:e9975200
[ 457.460574] Code: 1a000003 e5953004 e3130001 1a000000 (e7f001f2)
[ 457.467381] ---[ end trace 4acbc8c15e9e6aa7 ]---
Link: https://forum.armbian.com/topic/14727-wifi-ap-kernel-bug-in-kernel-5444/
Fixes: 8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info")
Fixes: f5ea9120be2e ("nl80211: add generation number to all dumps")
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608064620.74059-1-wlooi@ucalgary.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
platform_get_resource()
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Fixes: 517c4c44b323 ("usb: Add driver to allow any GPIO to be used for 7211 USB signals")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210605080914.2057758-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is no validation of the index from dwc3_wIndex_to_dep() and we might
be referring a non-existing ep and trigger a NULL pointer exception. In
certain configurations we might use fewer eps and the index might wrongly
indicate a larger ep index than existing.
By adding this validation from the patch we can actually report a wrong
index back to the caller.
In our usecase we are using a composite device on an older kernel, but
upstream might use this fix also. Unfortunately, I cannot describe the
hardware for others to reproduce the issue as it is a proprietary
implementation.
[ 82.958261] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a4
[ 82.966891] Mem abort info:
[ 82.969663] ESR = 0x96000006
[ 82.972703] Exception class = DABT (current EL), IL = 32 bits
[ 82.978603] SET = 0, FnV = 0
[ 82.981642] EA = 0, S1PTW = 0
[ 82.984765] Data abort info:
[ 82.987631] ISV = 0, ISS = 0x00000006
[ 82.991449] CM = 0, WnR = 0
[ 82.994409] user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c6210ccc
[ 83.000999] [00000000000000a4] pgd=0000000053aa5003, pud=0000000053aa5003, pmd=0000000000000000
[ 83.009685] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[ 83.026433] Process irq/62-dwc3 (pid: 303, stack limit = 0x000000003985154c)
[ 83.033470] CPU: 0 PID: 303 Comm: irq/62-dwc3 Not tainted 4.19.124 #1
[ 83.044836] pstate: 60000085 (nZCv daIf -PAN -UAO)
[ 83.049628] pc : dwc3_ep0_handle_feature+0x414/0x43c
[ 83.054558] lr : dwc3_ep0_interrupt+0x3b4/0xc94
...
[ 83.141788] Call trace:
[ 83.144227] dwc3_ep0_handle_feature+0x414/0x43c
[ 83.148823] dwc3_ep0_interrupt+0x3b4/0xc94
[ 83.181546] ---[ end trace aac6b5267d84c32f ]---
Signed-off-by: Marian-Cristian Rotariu <marian.c.rotariu@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608162650.58426-1-marian.c.rotariu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
when skb_clone() or skb_copy_expand() fail,
it should pull skb with lengh indicated by header,
or not it will read network data and check it as header.
Cc: <stable@vger.kernel.org>
Signed-off-by: Linyu Yuan <linyyuan@codeaurora.com>
Link: https://lore.kernel.org/r/20210608233547.3767-1-linyyuan@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For ACPI devices we have a symmetric API to put them, so use it in the driver.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210607205007.71458-3-andy.shevchenko@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
devm_ioremap_resource() can return an error, add missed check for it.
Fixes: 43d596e32276 ("usb: typec: intel_pmc_mux: Check the port status before connect")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210607205007.71458-2-andy.shevchenko@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
device_get_next_child_node() bumps a reference counting of a returned variable.
We have to balance it whenever we return to the caller.
Fixes: 6701adfa9693 ("usb: typec: driver for Intel PMC mux control")
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210607205007.71458-1-andy.shevchenko@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the VDM responses couldn't be sent successfully, it doesn't need to
finish the AMS until the retry count reaches the limit.
Fixes: 0908c5aca31e ("usb: typec: tcpm: AMS and Collision Avoidance")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable <stable@vger.kernel.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210606081452.764032-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usb_assign_descriptors() is called with 5 parameters,
the last 4 of which are the usb_descriptor_header for:
full-speed (USB1.1 - 12Mbps [including USB1.0 low-speed @ 1.5Mbps),
high-speed (USB2.0 - 480Mbps),
super-speed (USB3.0 - 5Gbps),
super-speed-plus (USB3.1 - 10Gbps).
The differences between full/high/super-speed descriptors are usually
substantial (due to changes in the maximum usb block size from 64 to 512
to 1024 bytes and other differences in the specs), while the difference
between 5 and 10Gbps descriptors may be as little as nothing
(in many cases the same tuning is simply good enough).
However if a gadget driver calls usb_assign_descriptors() with
a NULL descriptor for super-speed-plus and is then used on a max 10gbps
configuration, the kernel will crash with a null pointer dereference,
when a 10gbps capable device port + cable + host port combination shows up.
(This wouldn't happen if the gadget max-speed was set to 5gbps, but
it of course defaults to the maximum, and there's no real reason to
artificially limit it)
The fix is to simply use the 5gbps descriptor as the 10gbps descriptor,
if a 10gbps descriptor wasn't provided.
Obviously this won't fix the problem if the 5gbps descriptor is also
NULL, but such cases can't be so trivially solved (and any such gadgets
are unlikely to be used with USB3 ports any way).
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210609024459.1126080-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This avoids a null pointer dereference in
f_{ecm,eem,hid,loopback,printer,rndis,serial,sourcesink,subset,tcm}
by simply reusing the 5gbps config for 10gbps.
Fixes: eaef50c76057 ("usb: gadget: Update usb_assign_descriptors for SuperSpeedPlus")
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Michael R Sweet <msweet@msweet.org>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Peter Chen <peter.chen@nxp.com>
Cc: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Cc: Wei Ming Chen <jj251510319013@gmail.com>
Cc: Will McVicker <willmcvicker@google.com>
Cc: Zqiang <qiang.zhang@windriver.com>
Reviewed-By: Lorenzo Colitti <lorenzo@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210608044141.3898496-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The XHCI controller is required to enter D3hot rather than D3cold for AMD
s2idle on this hardware generation.
Otherwise, the 'Controller Not Ready' (CNR) bit is not being cleared by
host in resume and eventually this results in xhci resume failures during
the s2idle wakeup.
Link: https://lore.kernel.org/linux-usb/1612527609-7053-1-git-send-email-Prike.Liang@amd.com/
Suggested-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable <stable@vger.kernel.org> # 5.11+
Link: https://lore.kernel.org/r/20210527154534.8900-1-mario.limonciello@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The reasoning for this change is that if we already had
a packet pending, then we also already had a pending timer,
and as such there is no need to reschedule it.
This also prevents packets getting delayed 60 ms worst case
under a tiny packet every 290us transmit load, by keeping the
timeout always relative to the first queued up packet.
(300us delay * 16KB max aggregation / 80 byte packet =~ 60 ms)
As such the first packet is now at most delayed by 300us.
Under low transmit load, this will simply result in us sending
a shorter aggregate, as originally intended.
This patch has the benefit of greatly reducing (by ~10 factor
with 1500 byte frames aggregated into 16 kiB) the number of
(potentially pretty costly) updates to the hrtimer.
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210608085438.813960-1-zenczykowski@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ 190.544755] configfs-gadget gadget: notify speed -44967296
This is because 4250000000 - 2**32 is -44967296.
Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added")
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Yauheni Kaliuta <yauheni.kaliuta@nokia.com>
Cc: Linux USB Mailing List <linux-usb@vger.kernel.org>
Acked-By: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608005344.3762668-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus
Peter writes:
Two bug fixes for cdns3 and cdnsp
* tag 'usb-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb:
usb: cdnsp: Fix deadlock issue in cdnsp_thread_irq_handler
usb: cdns3: Enable TDL_CHK only for OUT ep
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Jonah writes:
USB-serial fixes for 5.13-rc5
Here's a fix for some pipe-direction mismatches in the quatech2 driver,
and a couple of new device ids for ftdi_sio and omninet (and a related
trivial cleanup).
All but the ftdi_sio commit have been in linux-next, and with no
reported issues.
* tag 'usb-serial-5.13-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: ftdi_sio: add NovaTech OrionMX product ID
USB: serial: omninet: update driver description
USB: serial: omninet: add device id for Zyxel Omni 56K Plus
USB: serial: quatech2: fix control-request directions
|
|
This patch fixes TX hangs with threaded NAPI enabled. The scheduled
NAPI seems to be executed in parallel with the interrupt on second
thread. Sometimes it happens that ltq_dma_disable_irq() is executed
after xrx200_tx_housekeeping(). The symptom is that TX interrupts
are disabled in the DMA controller. As a result, the TX hangs after
a few seconds of the iperf test. Scheduling NAPI after disabling
interrupts fixes this issue.
Tested on Lantiq xRX200 (BT Home Hub 5A).
Fixes: 9423361da523 ("net: lantiq: Disable IRQs only if NAPI gets scheduled ")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes several bugs found when (DMA/LLQ) mapping a packet for
transmission. The mapping procedure makes the transmitted packet
accessible by the device.
When using LLQ, this requires copying the packet's header to push header
(which would be passed to LLQ) and creating DMA mapping for the payload
(if the packet doesn't fit the maximum push length).
When not using LLQ, we map the whole packet with DMA.
The following bugs are fixed in the code:
1. Add support for non-LLQ machines:
The ena_xdp_tx_map_frame() function assumed that LLQ is
supported, and never mapped the whole packet using DMA. On some
instances, which don't support LLQ, this causes loss of traffic.
2. Wrong DMA buffer length passed to device:
When using LLQ, the first 'tx_max_header_size' bytes of the
packet would be copied to push header. The rest of the packet
would be copied to a DMA'd buffer.
3. Freeing the XDP buffer twice in case of a mapping error:
In case a buffer DMA mapping fails, the function uses
xdp_return_frame_rx_napi() to free the RX buffer and returns from
the function with an error. XDP frames that fail to xmit get
freed by the kernel and so there is no need for this call.
Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Because flow control is set up statically in ocelot_init_port(), and not
in phylink_mac_link_up(), what happens is that after the blamed commit,
the flow control remains disabled after the port flushing procedure.
Fixes: eb4733d7cffc ("net: dsa: felix: implement port flushing on .phylink_mac_link_down")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the cache missing code path of cached device, if a proper location
from the internal B+ tree is matched for a cache miss range, function
cached_dev_cache_miss() will be called in cache_lookup_fn() in the
following code block,
[code block 1]
526 unsigned int sectors = KEY_INODE(k) == s->iop.inode
527 ? min_t(uint64_t, INT_MAX,
528 KEY_START(k) - bio->bi_iter.bi_sector)
529 : INT_MAX;
530 int ret = s->d->cache_miss(b, s, bio, sectors);
Here s->d->cache_miss() is the call backfunction pointer initialized as
cached_dev_cache_miss(), the last parameter 'sectors' is an important
hint to calculate the size of read request to backing device of the
missing cache data.
Current calculation in above code block may generate oversized value of
'sectors', which consequently may trigger 2 different potential kernel
panics by BUG() or BUG_ON() as listed below,
1) BUG_ON() inside bch_btree_insert_key(),
[code block 2]
886 BUG_ON(b->ops->is_extents && !KEY_SIZE(k));
2) BUG() inside biovec_slab(),
[code block 3]
51 default:
52 BUG();
53 return NULL;
All the above panics are original from cached_dev_cache_miss() by the
oversized parameter 'sectors'.
Inside cached_dev_cache_miss(), parameter 'sectors' is used to calculate
the size of data read from backing device for the cache missing. This
size is stored in s->insert_bio_sectors by the following lines of code,
[code block 4]
909 s->insert_bio_sectors = min(sectors, bio_sectors(bio) + reada);
Then the actual key inserting to the internal B+ tree is generated and
stored in s->iop.replace_key by the following lines of code,
[code block 5]
911 s->iop.replace_key = KEY(s->iop.inode,
912 bio->bi_iter.bi_sector + s->insert_bio_sectors,
913 s->insert_bio_sectors);
The oversized parameter 'sectors' may trigger panic 1) by BUG_ON() from
the above code block.
And the bio sending to backing device for the missing data is allocated
with hint from s->insert_bio_sectors by the following lines of code,
[code block 6]
926 cache_bio = bio_alloc_bioset(GFP_NOWAIT,
927 DIV_ROUND_UP(s->insert_bio_sectors, PAGE_SECTORS),
928 &dc->disk.bio_split);
The oversized parameter 'sectors' may trigger panic 2) by BUG() from the
agove code block.
Now let me explain how the panics happen with the oversized 'sectors'.
In code block 5, replace_key is generated by macro KEY(). From the
definition of macro KEY(),
[code block 7]
71 #define KEY(inode, offset, size) \
72 ((struct bkey) { \
73 .high = (1ULL << 63) | ((__u64) (size) << 20) | (inode), \
74 .low = (offset) \
75 })
Here 'size' is 16bits width embedded in 64bits member 'high' of struct
bkey. But in code block 1, if "KEY_START(k) - bio->bi_iter.bi_sector" is
very probably to be larger than (1<<16) - 1, which makes the bkey size
calculation in code block 5 is overflowed. In one bug report the value
of parameter 'sectors' is 131072 (= 1 << 17), the overflowed 'sectors'
results the overflowed s->insert_bio_sectors in code block 4, then makes
size field of s->iop.replace_key to be 0 in code block 5. Then the 0-
sized s->iop.replace_key is inserted into the internal B+ tree as cache
missing check key (a special key to detect and avoid a racing between
normal write request and cache missing read request) as,
[code block 8]
915 ret = bch_btree_insert_check_key(b, &s->op, &s->iop.replace_key);
Then the 0-sized s->iop.replace_key as 3rd parameter triggers the bkey
size check BUG_ON() in code block 2, and causes the kernel panic 1).
Another kernel panic is from code block 6, is by the bvecs number
oversized value s->insert_bio_sectors from code block 4,
min(sectors, bio_sectors(bio) + reada)
There are two possibility for oversized reresult,
- bio_sectors(bio) is valid, but bio_sectors(bio) + reada is oversized.
- sectors < bio_sectors(bio) + reada, but sectors is oversized.
From a bug report the result of "DIV_ROUND_UP(s->insert_bio_sectors,
PAGE_SECTORS)" from code block 6 can be 344, 282, 946, 342 and many
other values which larther than BIO_MAX_VECS (a.k.a 256). When calling
bio_alloc_bioset() with such larger-than-256 value as the 2nd parameter,
this value will eventually be sent to biovec_slab() as parameter
'nr_vecs' in following code path,
bio_alloc_bioset() ==> bvec_alloc() ==> biovec_slab()
Because parameter 'nr_vecs' is larger-than-256 value, the panic by BUG()
in code block 3 is triggered inside biovec_slab().
From the above analysis, we know that the 4th parameter 'sector' sent
into cached_dev_cache_miss() may cause overflow in code block 5 and 6,
and finally cause kernel panic in code block 2 and 3. And if result of
bio_sectors(bio) + reada exceeds valid bvecs number, it may also trigger
kernel panic in code block 3 from code block 6.
Now the almost-useless readahead size for cache missing request back to
backing device is removed, this patch can fix the oversized issue with
more simpler method.
- add a local variable size_limit, set it by the minimum value from
the max bkey size and max bio bvecs number.
- set s->insert_bio_sectors by the minimum value from size_limit,
sectors, and the sectors size of bio.
- replace sectors by s->insert_bio_sectors to do bio_next_split.
By the above method with size_limit, s->insert_bio_sectors will never
result oversized replace_key size or bio bvecs number. And split bio
'miss' from bio_next_split() will always match the size of 'cache_bio',
that is the current maximum bio size we can sent to backing device for
fetching the cache missing data.
Current problmatic code can be partially found since Linux v3.13-rc1,
therefore all maintained stable kernels should try to apply this fix.
Reported-by: Alexander Ullrich <ealex1979@gmail.com>
Reported-by: Diego Ercolani <diego.ercolani@gmail.com>
Reported-by: Jan Szubiak <jan.szubiak@linuxpolska.pl>
Reported-by: Marco Rebhan <me@dblsaiko.net>
Reported-by: Matthias Ferdinand <bcache@mfedv.net>
Reported-by: Victor Westerhuis <victor@westerhu.is>
Reported-by: Vojtech Pavlik <vojtech@suse.cz>
Reported-and-tested-by: Rolf Fokkens <rolf@rolffokkens.nl>
Reported-and-tested-by: Thorsten Knabe <linux@thorsten-knabe.de>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Nix <nix@esperi.org.uk>
Cc: Takashi Iwai <tiwai@suse.com>
Link: https://lore.kernel.org/r/20210607125052.21277-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
