summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-07-19Merge branch 'pci/devres'Bjorn Helgaas
- Add pcim_add_mapping_to_legacy_table() and pcim_remove_mapping_from_legacy_table() helper functions to simplify devres iomap table (Philipp Stanner) - Reimplement devres that take a bit mask of BARs in a way that can be used to map partial BARs as well as entire BARs (Philipp Stanner) - Deprecate pcim_iomap_table() and pcim_iomap_regions_request_all() in favor of pcim_* request plus pcim_* mapping (Philipp Stanner) - Add pcim_request_region(), a managed interface to request a single BAR (Philipp Stanner) - Use the existing pci_is_enabled() interface to replace the struct devres.enabled bit (Philipp Stanner) - Move the struct pci_devres.pinned bit to struct pci_dev (Philipp Stanner) - Reimplement pcim_set_mwi() so it uses its own devres cleanup callback instead of a special-purpose bit in struct pci_devres (Philipp Stanner) - Add pcim_intx(), which is unambiguously managed, unlike pci_intx(), which is managed if pcim_enable_device() has been called but unmanaged otherwise (Philipp Stanner) - Remove pcim_release(), which is no longer needed after previous cleanups of pcim_set_mwi() and pci_intx() (Philipp Stanner) - Add pcim_iomap_range(), a managed interface to map part of a BAR (Philipp Stanner) - Fix vboxvideo leak by using the new pcim_iomap_range() instead of the unmanaged pci_iomap_range() (Philipp Stanner) * pci/devres: drm/vboxvideo: fix mapping leaks PCI: Add managed pcim_iomap_range() PCI: Remove legacy pcim_release() PCI: Add managed pcim_intx() PCI: Give pcim_set_mwi() its own devres cleanup callback PCI: Move struct pci_devres.pinned bit to struct pci_dev PCI: Remove struct pci_devres.enabled status bit PCI: Document hybrid devres hazards PCI: Add managed pcim_request_region() PCI: Deprecate pcim_iomap_table(), pcim_iomap_regions_request_all() PCI: Add managed partial-BAR request and map infrastructure PCI: Add devres helpers for iomap table PCI: Add and use devres helper for bit masks
2024-07-19PCI: loongson: Enable MSI in LS7A Root ComplexHuacai Chen
The LS7A chipset can be used as part of a PCIe Root Complex with Loongson-3C6000 and similar CPUs. In this case, DEV_LS7A_PCIE_PORT5 has a PCI_CLASS_BRIDGE_HOST class code, and it is a Type 0 Function whose config space provides access to Root Complex registers. The DEV_LS7A_PCIE_PORT5 has an MSI Capability, and its MSI Enable bit must be set before other devices below the Root Complex can use MSI. This is not the standard PCI behavior of MSI Enable, so the normal PCI MSI code does not set it. Set the DEV_LS7A_PCIE_PORT5 MSI Enable bit via a quirk so other devices below the Root Complex can use MSI. [kwilczynski: exit early to reduce indentation; commit log] Link: https://lore.kernel.org/linux-pci/20240612065315.2048110-1-chenhuacai@loongson.cn Signed-off-by: Sheng Wu <wusheng@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2024-07-19eth: fbnic: don't build the driver when skb has more than 21 fragsJakub Kicinski
Similarly to commit 0e03c643dc93 ("eth: fbnic: fix s390 build."), the driver won't build if skb_shared_info has more than 25 frags assuming a 64B cache line and 21 frags assuming a 128B cache line. (512 - 48 - 64) / 16 = 25 (512 - 48 - 128) / 16 = 21 Fixes: 0cb4c0a13723 ("eth: fbnic: Implement Rx queue alloc/start/stop/free") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20240717161600.1291544-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-19dm vdo int-map: fix kerneldoc formattingMatthew Sakai
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202407141607.M3E2XQ0Z-lkp@intel.com/ Signed-off-by: Matthew Sakai <msakai@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-19dm vdo repair: add missing kerneldoc fieldsMatthew Sakai
Also remove trivial comment for increment_recovery_point. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9518 Signed-off-by: Matthew Sakai <msakai@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-19dm: Constify struct dm_block_validatorChristophe JAILLET
'struct dm_block_validator' are not modified in these drivers. Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig, as an example: Before: ====== text data bss dec hex filename 32047 920 16 32983 80d7 drivers/md/dm-cache-metadata.o After: ===== text data bss dec hex filename 32075 896 16 32987 80db drivers/md/dm-cache-metadata.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-19dm-integrity: introduce the Inline modeMikulas Patocka
This commit introduces a new 'I' mode for dm-integrity. The 'I' mode may be selected if the underlying device has non-power-of-2 sector size. In this mode, dm-integrity will store integrity data directly in device's sectors and it will not use journal. This mode improves performance and reduces flash wear because there would be no journal writes. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-07-18Merge tag 'sparc-for-6.11-tag1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc Pull sparc updates from Andreas Larsson: - Add MODULE_DESCRIPTION for a number of sbus drivers - Fix linking error for large sparc32 kernels - Fix incorrect functions signature and prototype warnings for sparc64 * tag 'sparc-for-6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc: sparc64: Fix prototype warnings in hibernate.c sparc64: Fix prototype warning for prom_get_mmu_ihandle sparc64: Fix incorrect function signature and add prototype for prom_cif_init sparc64: Fix prototype warnings for floppy_64.h sparc32: Fix truncated relocation errors when linking large kernels sbus: add missing MODULE_DESCRIPTION() macros
2024-07-18Merge tag 's390-6.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Remove restrictions on PAI NNPA and crypto counters, enabling concurrent per-task and system-wide sampling and counting events - Switch to GENERIC_CPU_DEVICES by setting up the CPU present mask in the architecture code and letting the generic code handle CPU bring-up - Add support for the diag204 busy indication facility to prevent undesirable blocking during hypervisor logical CPU utilization queries. Implement results caching - Improve the handling of Store Data SCLP events by suppressing unnecessary warning, preventing buffer release in I/O during failures, and adding timeout handling for Store Data requests to address potential firmware issues - Provide optimized __arch_hweight*() implementations - Remove the unnecessary CPU KOBJ_CHANGE uevents generated during topology updates, as they are unused and also not present on other architectures - Cleanup atomic_ops, optimize __atomic_set() for small values and __atomic_cmpxchg_bool() for compilers supporting flag output constraint - Couple of cleanups for KVM: - Move and improve KVM struct definitions for DAT tables from gaccess.c to a new header - Pass the asce as parameter to sie64a() - Make the crdte() and cspg() page table handling wrappers return a boolean to indicate success, like the other existing "compare and swap" wrappers - Add documentation for HWCAP flags - Switch to obtaining total RAM pages from memblock instead of totalram_pages() during mm init, to ensure correct calculation of zero page size, when defer_init is enabled - Refactor lowcore access and switch to using the get_lowcore() function instead of the S390_lowcore macro - Cleanups for PG_arch_1 and folio handling in UV and hugetlb code - Add missing MODULE_DESCRIPTION() macros - Fix VM_FAULT_HWPOISON handling in do_exception() * tag 's390-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits) s390/mm: Fix VM_FAULT_HWPOISON handling in do_exception() s390/kvm: Move bitfields for dat tables s390/entry: Pass the asce as parameter to sie64a() s390/sthyi: Use cached data when diag is busy s390/sthyi: Move diag operations s390/hypfs_diag: Diag204 busy loop s390/diag: Add busy-indication-facility requirements s390/diag: Diag204 add busy return errno s390/diag: Return errno's from diag204 s390/sclp: Diag204 busy indication facility detection s390/atomic_ops: Make use of flag output constraint s390/atomic_ops: Improve __atomic_set() for small values s390/atomic_ops: Use symbolic names s390/smp: Switch to GENERIC_CPU_DEVICES s390/hwcaps: Add documentation for HWCAP flags s390/pgtable: Make crdte() and cspg() return a value s390/topology: Remove CPU KOBJ_CHANGE uevents s390/sclp: Add timeout to Store Data requests s390/sclp: Prevent release of buffer in I/O s390/sclp: Suppress unnecessary Store Data warning ...
2024-07-18Merge tag 'fbdev-for-6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev updates from Helge Deller: - Detect VGA compatibility from VESA attributes (Thomas Zimmermann) - Make I2C terminology more inclusive in smscufx and viafb (Easwar Hariharan) - Add lots of missing MODULE_DESCRIPTION() macros (Jeff Johnson) - Logo code cleanups (Geert Uytterhoeven) - Minor fixes by Chen Ni, Kuninori Morimoto, Uwe Kleine-König and Christophe Jaillett * tag 'fbdev-for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (21 commits) fbdev: viafb: Make I2C terminology more inclusive fbdev: smscufx: Make I2C terminology more inclusive fbdev: omap2: Return clk_prepare_enable to transfer the error fbdev: mmp: Constify struct mmp_overlay_ops fbdev: Drop explicit initialization of struct i2c_device_id::driver_data to 0 video: agp: add remaining missing MODULE_DESCRIPTION() macros video: console: add missing MODULE_DESCRIPTION() macros fbdev: amifb: add missing MODULE_DESCRIPTION() macro fbdev: c2p_planar: add missing MODULE_DESCRIPTION() macro fbdev: vesafb: Detect VGA compatibility from screen info's VESA attributes fbdev: omapfb: use of_graph_get_remote_port() fbdev: omapdss: use for_each_endpoint_of_node() fbdev: offb: add missing MODULE_DESCRIPTION() macro fbdev: vfb: add missing MODULE_DESCRIPTION() macro fbdev: macmodes: add missing MODULE_DESCRIPTION() macro fbdev: goldfishfb: add missing MODULE_DESCRIPTION() macro fbdev: kyro: add missing MODULE_DESCRIPTION() macro fbdev: viafb: add missing MODULE_DESCRIPTION() macro fbdev: matroxfb: add missing MODULE_DESCRIPTION() macros video/logo: Remove linux_serial_image comments ...
2024-07-18PCI: Check for the existence of 'dev.of_node' before calling ↵Manivannan Sadhasivam
of_platform_populate() Commit 50b040ef3732 ("PCI/pwrctl: only call of_platform_populate() if CONFIG_OF is enabled") added the CONFIG_OF guard for the of_platform_populate() API. But it missed the fact that the CONFIG_OF platforms can also run on ACPI without devicetree (so dev.of_node will be NULL). In those cases, of_platform_populate() will fail with below error messages as seen on the Ampere Altra box: pci 000c:00:01.0: failed to populate child OF nodes (-22) pci 000c:00:02.0: failed to populate child OF nodes (-22) Fix this by checking for the existence of 'dev.of_node' before calling the of_platform_populate() API. This also warrants the removal of CONFIG_OF check, since dev_of_node() helper will return NULL if CONFIG_OF is not enabled. While at it, let's also use dev_of_node() to pass device OF node pointer to of_platform_populate(). Fixes: 50b040ef3732 ("PCI/pwrctl: only call of_platform_populate() if CONFIG_OF is enabled") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Closes: https://lore.kernel.org/linux-arm-msm/CAHk-=wjcO_9dkNf-bNda6bzykb5ZXWtAYA97p7oDsXPHmMRi6g@mail.gmail.com Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-07-18Merge tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm updates from Dave Airlie: "There's a lot of stuff in here, amd, i915 and xe have new platform work, lots of core rework around EDID handling, some new COMPILE_TEST options, maintainer changes and a lots of other stuff. Summary: core: - deprecate DRM data and return 0 date - connector: Create a set of helpers to help with HDMI support - Remove driver owner assignments - Allow more drivers to compile with COMPILE_TEST - Conversions to drm_edid - Sprinkle MODULE_DESCRIPTIONS everywhere they are missing - Remove drm_mm_replace_node - print: Add a drm prefix to warn level messages too, remove ___drm_dbg, consolidate prefix handling - New monochrome TV mode variant ttm: - improve number of page faults on some platforms - fix test builds under PREEMPT_RT - more test coverage ci: - Require a more recent version of mesa - improve farm setup and test generation dma-buf: - warn if reserving 0 fence slots - internal API heap enhancements fbdev: - Create memory manager optimized fbdev emulation panic: - Allow to select fonts - improve drm_fb_dma_get_scanout_buffer - Allow to dump kmsg to the screen bridge: - Remove redundant checks on bridge->encoder - Remove drm_bridge_chain_mode_fixup - bridge-connector: Plumb in the new HDMI helper - analogix_dp: Various improvements, handle AUX transfers timeout - samsung-dsim: Fix timings calculation - tc358767: Plenty of small fixes, fix no connector attach, fix clocks - sii902x: state validation improvements panels: - Switch panels from register table initialization to proper code - Now that the panel code tracks the panel state, remove every ad-hoc implementation in the panel drivers - More cleanup of prepare / enable state tracking in drivers - edp: Drop legacy panel compatibles - simple-bridge: Switch to devm_drm_bridge_add - New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology 13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView PM070WL4, Lincoln Technologies LCD197, Ortustech COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti amdgpu: - DCN 4.0.x support - GC 12.0 support - GMC 12.0 support - SDMA 7.0 support - MES12 support - MMHUB 4.1 support - GFX12 modifier and DCC support - lots of IP fixes/updates amdkfd: - Contiguous VRAM allocations - GC 12.0 support - SDMA 7.0 support - SR-IOV fixes - KFD GFX ALU exceptions i915: - Battlemage Xe2 HPD display enablement - Panel Replay enabling - DP AUX-less ALPM/LOBF - Enable link training failure fallback for DP MST links - CMRR (Content Match Refresh Rate) enabling - Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps - Enable eDP AUX based HDR backlight - Support replaying GPU hangs with captured context image - Automate CCS Mode setting during engine resets - lots of refactoring - Support replaying GPU hangs with captured context image - Increase FLR timeout from 3s to 9s - Enable w/a 16021333562 for DG2, MTL and ARL [guc] xe: - update MAINATINERS - New uapi adding OA functionality to Xe - expose l3 bank mask - fix display detect on ADL-N - runtime PM Fixes - Fix silent backmerge issues - More prep for SR-IOV - HWmon additions - per client usage info - Rework GPU page fault handling - Drop EXEC_QUEUE_FLAG_BANNED - Add BMG PCI IDs - Scheduler fixes and improvements - Rename xe_exec_queue::compute to xe_exec_queue::lr - Use ttm_uncached for BO with NEEDS_UC flag - Rename xe perf layer as xe observation layer - lots of refactoring radeon: - Backlight workaround for iMac - Silence UBSAN flex array warnings msm: - Validate registers XML description against schema in CI - core/dpu: SM7150 support - mdp5: Add support for MSM8937 - gpu: Add param for userspace to know if raytracing is supported - gpu: X185 support (aka gpu in X1 laptop chips) - gpu: a505 support ivpu: - hardware scheduler support - profiling support - improvements to the platform support layer - firmware handling improvements - clocks/power mgmt improvements - scheduler/logging improvements habanalabs: - Gradual sleep in polling memory macro - Reduce Gaudi2 MSI-X interrupt count to 128 - Add Gaudi2-D revision support - Add timestamp to CPLD info - Gaudi2: Assume hard-reset by firmware upon MC SEI severe error - Align Gaudi2 interrupt names - Check for errors after preboot is ready - Change habanalabs maintainer and git repo path mgag200: - refactoring and improvements - Add BMC output - enable polling nouveau: - add registry command line v3d: - perf counters improvements zynqmp: - irq and debugfs improvements atmel-hlcdc: - Support XLCDC in sam9x7 mipi-dbi: - Remove mipi_dbi_machine_little_endian - make SPI bits per word configurable - support RGB888 - allow pixel formats to be specified in the DT sun4i: - Rework the blender setup for DE2 panfrost: - Enable MT8188 support vc4: - Monochrome TV support exynos: - fix fallback mode regression - fix memory leak - Use drm_edid_duplicate() instead of kmemdup() etnaviv: - fix i.MX8MP NPU clock gating - workaround FE register cdc issues on some cores - fix DMA sync handling for cached buffers - fix job timeout handling - keep TS enabled on MMUv2 cores for improved performance mediatek: - Convert to platform remove callback returning void- - Drop chain_mode_fixup call in mode_valid() - Fixes the errors of MediaTek display driver found by IGT - Add display support for the MT8365-EVK board - Fix bit depth overwritten for mtk_ovl_set bit_depth() - Fix possible_crtcs calculation - Fix spurious kfree() ast: - refactor mode setting code stm: - Add LVDS support - DSI PHY updates" * tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits) drm/amdgpu/mes12: add missing opcode string drm/amdgpu/mes11: update opcode strings Revert "drm/amd/display: Reset freesync config before update new state" drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB drm/xe: Drop trace_xe_hw_fence_free drm/xe/uapi: Rename xe perf layer as xe observation layer drm/amdgpu: remove exp hw support check for gfx12 drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed drm/amdgpu: flush all cached ras bad pages to eeprom drm/amdgpu: select compute ME engines dynamically drm/amd/display: Allow display DCC for DCN401 drm/amdgpu: select compute ME engines dynamically drm/amdgpu/job: Replace DRM_INFO/ERROR logging drm/amdgpu: select compute ME engines dynamically drm/amd/pm: Ignore initial value in smu response register drm/amdgpu: Initialize VF partition mode drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping MAINTAINERS: fix Xinhui's name MAINTAINERS: update powerplay and swsmu drm/qxl: Pin buffer objects for internal mappings ...
2024-07-18Kconfig: reduce the amount of power sequencing noiseBartosz Golaszewski
Kconfig will ask the user twice about power sequencing: once for the QCom WCN power sequencing driver and then again for the PCI power control driver using it. Let's automate the selection of PCI_PWRCTL by introducing a new hidden symbol: HAVE_PWRCTL which should be selected by all platforms that have the need to include PCI power control code (right now: only ARCH_QCOM). The pwrseq-based PCI pwrctl driver itself will then be selected by the drivers binding to devices that may require external handling of the power-up sequence (currently: ath11k and ath12k) based on the value of HAVE_PWRCTL. Make all PCI pwrctl Kconfig symbols hidden so that no questions are asked during configuration. Fixes: 4565d2652a37 ("PCI/pwrctl: Add PCI power control core code") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Closes: https://lore.kernel.org/lkml/CAHk-=wjWc5dzcj2O1tEgNHY1rnQW63JwtuZi_vAZPqy6wqpoUQ@mail.gmail.com/ Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> # drivers/net/wireless/ath Link: https://lore.kernel.org/r/20240717142803.53248-1-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-07-18net: dsa: b53: Limit chip-wide jumbo frame config to CPU portsMartin Willi
Broadcom switches supported by the b53 driver use a chip-wide jumbo frame configuration. In the commit referenced with the Fixes tag, the setting is applied just for the last port changing its MTU. While configuring CPU ports accounts for tagger overhead, user ports do not. When setting the MTU for a user port, the chip-wide setting is reduced to not include the tagger overhead, resulting in an potentially insufficient chip-wide maximum frame size for the CPU port. As, by design, the CPU port MTU is adjusted for any user port change, apply the chip-wide setting only for CPU ports. This aligns the driver to the behavior of other switch drivers. Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support") Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Martin Willi <martin@strongswan.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-18net: dsa: mv88e6xxx: Limit chip-wide frame size config to CPU portsMartin Willi
Marvell chips not supporting per-port jumbo frame size configurations use a chip-wide frame size configuration. In the commit referenced with the Fixes tag, the setting is applied just for the last port changing its MTU. While configuring CPU ports accounts for tagger overhead, user ports do not. When setting the MTU for a user port, the chip-wide setting is reduced to not include the tagger overhead, resulting in an potentially insufficient maximum frame size for the CPU port. Specifically, sending full-size frames from the CPU port on a MV88E6097 having a user port MTU of 1500 bytes results in dropped frames. As, by design, the CPU port MTU is adjusted for any user port change, apply the chip-wide setting only for CPU ports. Fixes: 1baf0fac10fb ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU") Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Martin Willi <martin@strongswan.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-18net: airoha: Fix NULL pointer dereference in airoha_qdma_cleanup_rx_queue()Lorenzo Bianconi
Move page_pool_get_dma_dir() inside the while loop of airoha_qdma_cleanup_rx_queue routine in order to avoid possible NULL pointer dereference if airoha_qdma_init_rx_queue() fails before properly allocating the page_pool pointer. Fixes: 23020f049327 ("net: airoha: Introduce ethernet support for EN7581 SoC") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/7330a41bba720c33abc039955f6172457a3a34f0.1721205981.git.lorenzo@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-18net: wwan: t7xx: add support for Dell DW5933eJack Wu
add support for Dell DW5933e (0x14c0, 0x4d75) Signed-off-by: Jack Wu <wojackbb@gmail.com> Link: https://patch.msgid.link/20240716024902.16054-1-wojackbb@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-18misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systemsVamsi Attunuru
Upon adding CONFIG_ARCH_THUNDER & CONFIG_COMPILE_TEST dependency, compilation errors arise on 32-bit ARM with writeq() & readq() calls which are used for accessing 64-bit values. Since DPI hardware only works with 64-bit register accesses, using CONFIG_64BIT dependency to skip compilation on 32-bit systems. Fixes: a5e43e2d202d ("misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI") Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20240717163739.181236-1-vattunuru@marvell.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-17net: airoha: fix error branch in airoha_dev_xmit and airoha_set_gdm_portsLorenzo Bianconi
Fix error case management in airoha_dev_xmit routine since we need to DMA unmap pending buffers starting from q->head. Moreover fix a typo in error case branch in airoha_set_gdm_ports routine. Fixes: 23020f049327 ("net: airoha: Introduce ethernet support for EN7581 SoC") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/b628871bc8ae4861b5e2ab4db90aaf373cbb7cee.1721203880.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-17gve: Fix XDP TX completion handling when counters overflowJoshua Washington
In gve_clean_xdp_done, the driver processes the TX completions based on a 32-bit NIC counter and a 32-bit completion counter stored in the tx queue. Fix the for loop so that the counter wraparound is handled correctly. Fixes: 75eaae158b1b ("gve: Add XDP DROP and TX support for GQI-QPL format") Signed-off-by: Joshua Washington <joshwash@google.com> Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240716171041.1561142-1-pkaligineedi@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-17Merge tag 'media/v6.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New sensor drivers: gc05a2, gc08a3 and imx283 - New serializer/deserializer drivers: max96714 and max96717 - New JPEG encoder driver: e5010 - Support for Raspberry Pi PiSP Backend (BE) ISP driver - Old documentation for av7110 driver removed, as a new version was added as Documentation/userspace-api/media/dvb/legacy*.rst - atompisp: Linux firmwares are now available, so drop firmware-related task from TODO and update firmware logic - The imx258 driver has gained several improvements - wave5 driver has gained support for HEVC decoding - em28xx gained support for MyGica UTV3 - av7110 budget-patch driver removed - Lots of other cleanups, improvements and fixes * tag 'media/v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (301 commits) media: raspberrypi: Switch to remove_new media: uapi: pisp_be_config: Add extra config fields media: uapi: pisp_be_config: Re-sort pisp_be_tiles_config media: uapi: pisp_common: Capitalize all macros media: uapi: pisp_common: Add 32 bpp format test media: uapi: pisp_be_config: Drop BIT() from uAPI media: stm32: dcmipp: correct error handling in dcmipp_create_subdevs media: atomisp: Fix spelling mistakes in sh_css_sp.c media: atomisp: Fix spelling mistake in ia_css_debug.c media: atomisp: Fix spelling mistake in hmm_bo.c media: atomisp: Fix spelling mistake in ia_css_eed1_8.host.c media: atomisp: Fix spelling mistake in sh_css_internal.h media: atomisp: Fix spelling mistake "pipline" -> "pipeline" media: atomisp: Remove unused GPIO related defines and APIs media: atomisp: Replace COMPILATION_ERROR_IF() by static_assert() media: atomisp: Clean up unused macros from math_support.h media: atomisp: csi2-bridge: Add DMI quirk for OV5693 on Xiaomi Mipad2 media: atomisp: Update TODO media: atomisp: Prefix firmware paths with "intel/ipu/" media: atomisp: Remove firmware_name module parameter ...
2024-07-17Merge tag 'devicetree-for-6.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DT Bindings: - Convert and add a bunch of IBM FSI related bindings - Add a new schema listing legacy compatibles which will (probably) never be documented. This will silence various checks warning about them. - Add bindings for Sierra Wireless mangOH Green SPI IoT interface, new Arm 2024 Cortex and Neoverse CPUs, QCom sc8180x PDC, QCom SDX75 GPI DMA, imx8mp/imx8qxp fsl,irqsteer, and Renesas RZ/G2UL CRU and CSI-2 blocks - Convert Spreadtrum sprd-timer, FSL cpm_qe, FSL fsl,ls-scfg-msi, FSL q(b)man-*, FSL qoriq-mc, and img,pdc-wdt bindings to DT schema - Drop obsolete stericsson,abx500.txt DT core: - Update dtc to upstream version v1.7.0-93-g1df7b047fe43 - Add support to run DT validation on DTs with applied overlays - Add helper for creating boolean properties in dynamic nodes and use that for dynamic PCI nodes - Clean-up early parsing of '#{address,size}-cells'" * tag 'devicetree-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (39 commits) dt-bindings: timer: sprd-timer: convert to YAML dt-bindings: incomplete-devices: document devices without bindings dt-bindings: trivial-devices: document the Sierra Wireless mangOH Green SPI IoT interface scripts/dtc: Update to upstream version v1.7.0-93-g1df7b047fe43 dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node dt-bindings: soc: fsl: cpm_qe: convert to yaml format dt-bindings: i2c: i2c-fsi: Convert to json-schema dt-bindings: fsi: Document the FSI Hub Controller dt-bindings: fsi: Document the AST2700 FSI controller dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller dt-bindings: fsi: Document the FSI controller common properties dt-bindings: fsi: Document the IBM SBEFIFO engine dt-bindings: fsi: p9-occ: Convert to json-schema dt-bindings: fsi: Document the IBM SCOM engine dt-bindings: fsi: fsi2spi: Document SPI controller child nodes dt-bindings: interrupt-controller: convert fsl,ls-scfg-msi to yaml dt-bindings: soc: fsl: Convert q(b)man-* to yaml format dt-bindings: misc: fsl,qoriq-mc: convert to yaml format dt-bindings: drop stale Anson Huang from maintainers ...
2024-07-17Merge tag 'for-6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux Pull hardware timestamp update from Dipen Patel: - Add module description in hte test to silence modpost warnings * tag 'for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux: hte: tegra-194: add missing MODULE_DESCRIPTION() macro
2024-07-17Merge tag 'leds-next-6.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds Pull LED updates from Lee Jones: "Core Frameworks: - New trigger for Input Events - New led_mc_set_brightness() call to adapt colour/brightness for mutli-colour LEDs - New lled_mc_trigger_event() call to call the above based on given trigger conditions - New led_get_color_name() call, a wrapper around the existing led_colors[] array - A new flag to avoid automatic renaming of LED devices New Drivers: - Silergy SY7802 Flash LED Controller - Texas Instruments LP5569 LED Controller - ChromeOS EC LED Controller New Device Support: - KTD202{6,7} support for Kinetic KTD2026/7 LEDs Fix-ups: - Replace ACPI/DT firmware helpers with agnostic variants - Make use of resource managed devm_* API calls - Device Tree binding adaptions/conversions/creation - Constify/staticise applicable data structures - Trivial; spelling, whitespace, coding-style adaptions - Drop i2c_device_id::driver_data where the value is unused - Utilise centrally provided helpers and macros to aid simplicity and avoid duplication - Use generic platform device properties instead of OF/ACPI specific ones - Consolidate/de-duplicate various functionality - Remove superfluous/duplicated/unused sections - Make use of the new *_scoped() guard APIs - Improve/simplify error handling Bug Fixes: - Flush pending brightness changes before activating the trigger - Repair incorrect device naming preventing matches - Prevent memory leaks by correctly free resources during error handling routines - Repair locking issue causing circular dependency splats and lock-ups - Unregister sysfs entries before deactivating triggers to prevent use-after issues - Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings - Use correct return codes expected by the callers - Omit set_brightness() error message for a LEDs that support only HW triggers" * tag 'leds-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (65 commits) leds: leds-lp5569: Enable chip after chip configuration leds: leds-lp5569: Better handle enabling clock internal setting leds: leds-lp5569: Fix typo in driver name leds: flash: leds-qcom-flash: Test the correct variable in init leds: leds-lp55xx: Convert mutex lock/unlock to guard API leds: leds-lp5523: Convert to sysfs_emit API leds: leds-lp5569: Convert to sysfs_emit API Revert "leds: led-core: Fix refcount leak in of_led_get()" leds: leds-lp5569: Add support for Texas Instruments LP5569 leds: leds-lp55xx: Drop deprecated defines leds: leds-lp55xx: Support ENGINE program up to 128 bytes leds: leds-lp55xx: Generalize sysfs master_fader leds: leds-lp55xx: Generalize sysfs engine_leds leds: leds-lp55xx: Generalize sysfs engine_load and engine_mode leds: leds-lp55xx: Generalize stop_engine function leds: leds-lp55xx: Generalize turn_off_channels function leds: leds-lp55xx: Generalize set_led_current function leds: leds-lp55xx: Generalize multicolor_brightness function leds: leds-lp55xx: Generalize led_brightness function leds: leds-lp55xx: Generalize firmware_loaded function ...
2024-07-17Merge tag 'backlight-next-6.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "New Drivers: - Texas Instruments LM3509 Backlight Driver Fix-ups: - Device Tree binding adaptions/conversions/creation - Drop i2c_device_id::driver_data where the value is unused - Make use of the new *_scoped() guard APIs - Decouple from fbdev by providing Backlight with its own BACKLIGHT_POWER_* constrains Bug Fixes: - Correctly assess return values (NULL vs IS_ERR()) - Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings" * tag 'backlight-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (23 commits) backlight: sky81452-backlight: Use backlight power constants backlight: rave-sp-backlight: Use backlight power constants backlight: pwm-backlight: Use backlight power constants backlight: pcf50633-backlight: Use backlight power constants backlight: pandora-backlight: Use backlight power constants backlight: mp3309c: Use backlight power constants backlight: lm3533-backlight: Use backlight power constants backlight: led-backlight: Use backlight power constants backlight: ktd253-backlight: Use backlight power constants backlight: kb3886-bl: Use backlight power constants backlight: journada_bl: Use backlight power constants backlight: ipaq-micro-backlight: Use backlight power constants backlight: gpio-backlight: Use backlight power constants backlight: corgi-lcd: Use backlight power constants backlight: ams369fb06: Use backlight power constants backlight: aat2870-backlight: Use blacklight power constants backlight: Add BACKLIGHT_POWER_ constants for power states backlight: lm3509_bl: Fix early returns in for_each_child_of_node() backlight: Drop explicit initialization of struct i2c_device_id::driver_data to 0 backlight: Add missing MODULE_DESCRIPTION() macros ...
2024-07-17Merge tag 'mfd-next-6.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - ROHM BD96801 Power Management IC - Cirrus Logic CS40L50 Haptic Driver with Waveform Memory - Marvell 88PM886 Power Management IC New Device Support: - Keyboard Backlight to ChromeOS Embedded Controller - LEDs to ChromeOS Embedded Controller - Charge Control to ChromeOS Embedded Controller - HW Monitoring Service to ChromeOS Embedded Controller - AUXADCs to MediaTek MT635{7,8,9} Power Management ICs New Functionality: - Allow Syscon consumers to supply their own Regmaps on registration Fix-ups: - Constify/staticise applicable data structures - Remove superfluous/duplicated/unused sections - Device Tree binding adaptions/conversions/creation - Trivial; spelling, whitespace, coding-style adaptions - Utilise centrally provided helpers and macros to aid simplicity/duplication - Drop i2c_device_id::driver_data where the value is unused - Replace ACPI/DT firmware helpers with agnostic variants - Move over to GPIOD (descriptor-based) APIs - Annotate a bunch of __counted_by() cases - Straighten out some includes Bug Fixes: - Ensure potentially asserted recent lines are deasserted during initialisation - Avoid "<module>.ko is added to multiple modules" warnings - Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings - Fix Wvoid-pointer-to-enum-cast warnings" * tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits) mfd: timberdale: Attach device properties to TSC2007 board info mfd: tmio: Move header to platform_data mfd: tmio: Sanitize comments mfd: tmio: Update include files mmc: tmio/sdhi: Fix includes mfd: tmio: Remove obsolete io accessors mfd: tmio: Remove obsolete platform_data watchdog: bd96801_wdt: Add missing include for FIELD_*() dt-bindings: mfd: syscon: Add APM poweroff mailbox dt-bindings: mfd: syscon: Split and enforce documenting MFD children dt-bindings: mfd: rk817: Merge support for RK809 dt-bindings: mfd: rk817: Fixup clocks and reference dai-common dt-bindings: mfd: syscon: Add TI's opp table compatible mfd: omap-usb-tll: Use struct_size to allocate tll dt-bindings: mfd: Explain lack of child dependency in simple-mfd dt-bindings: mfd: Dual licensing for st,stpmic1 bindings mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode() mfd: lm3533: Move to new GPIO descriptor-based APIs mfd: tps65912: Use devm helper functions to simplify probe ...
2024-07-17Merge tag 'for-linus-2024071601' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Benjamin Tissoires: - rewrite of the HID-BPF internal implementation to use bpf struct_ops instead of a tracing endpoint (Benjamin Tissoires) - add two new HID-BPF hooks to be able to intercept userspace calls targeting a HID device and filtering them (Benjamin Tissoires) - add support for various new devices through HID-BPF filters (Benjamin Tissoires) - add support for the magic keyboard backlight (Orlando Chamberlain) - add the missing MODULE_DESCRIPTION() macros in HID drivers (Jeff Johnson) - use of kvzalloc in case memory gets too fragmented (Hailong Liu) - retrieve the device firmware node in the child HID device (Danny Kaehn) - some hid-uclogic improvements (José Expósito) - some more typos, trivial fixes, kernel doctext and unused functions cleanups * tag 'for-linus-2024071601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (60 commits) HID: hid-steam: Fix typo in goto label HID: mcp2221: Remove unnecessary semicolon HID: Fix spelling mistakes "Kensigton" -> "Kensington" HID: add more missing MODULE_DESCRIPTION() macros HID: samples: fix the 2 struct_ops definitions HID: fix for amples in for-6.11/bpf HID: apple: Add support for magic keyboard backlight on T2 Macs HID: bpf: Thrustmaster TCA Yoke Boeing joystick fix HID: bpf: Add Huion Dial 2 bpf fixup HID: bpf: Add support for the XP-PEN Deco Mini 4 HID: bpf: move the BIT() macro to hid_bpf_helpers.h HID: bpf: add a driver for the Huion Inspiroy 2S (H641P) HID: bpf: Add a HID report composition helper macros HID: bpf: doc fixes for hid_hw_request() hooks HID: bpf: doc fixes for hid_hw_request() hooks HID: bpf: fix gcc warning and unify __u64 into u64 selftests/hid: ensure CKI can compile our new tests on old kernels selftests/hid: add an infinite loop test for hid_bpf_try_input_report selftests/hid: add another test for injecting an event from an event hook HID: bpf: allow hid_device_event hooks to inject input reports on self ...
2024-07-17Merge tag 'for-linus-6.11-1' of https://github.com/cminyard/linux-ipmiLinus Torvalds
Pull IPMI updates from Corey Minyard: "Some cleanups for device changes coming, and some range checks on data coming from a host to a BMC" * tag 'for-linus-6.11-1' of https://github.com/cminyard/linux-ipmi: ipmi: Drop explicit initialization of struct i2c_device_id::driver_data to 0 ipmi: ssif_bmc: prevent integer overflow on 32bit systems
2024-07-17Merge tag 'platform-drivers-x86-v6.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Ilpo Järvinen: - amd/pmf: Report system state changes using existing input events - asus-wmi: Zenbook 2023 camera LED disable support and fix TUF laptop keyboard RGB LED sysfs interface - dell-pc: Fan modes / platform profile support - hp-wmi: Fix platform profile switching on Omen/Victus laptops - intel/ISST: Use only TPMI interface when TPMI and legacy interfaces are available - intel/pmc: LTR restore support to pair with LTR ignore - intel/tpmi: Performance Limit Reasons (PLR) and APIC <-> Punit CPU numbering mapping support - WMI: driver override support and docs improvements - lenovo-yoga-c630: Support for EC (platform/arm64) - platform/arm64: Fix build with COMPILE_TEST (broke after addition of C630) - tools: Intel Speed Select Turbo Ratio Limit fix - Miscellaneous cleanups / refactoring / improvements * tag 'platform-drivers-x86-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits) platform/x86: asus-wmi: fix TUF laptop RGB variant platform/x86/intel/tpmi/plr: Fix output in plr_print_bits() Docs/admin-guide: Remove pmf leftover reference from the index platform/x86: ideapad-laptop: use cleanup.h platform/x86: hp-wmi: Fix implementation of the platform_profile_omen_get function platform: arm64: EC_LENOVO_YOGA_C630 should depend on ARCH_QCOM platform: arm64: EC_ACER_ASPIRE1 should depend on ARCH_QCOM platform/x86/amd/pmf: Remove update system state document platform/x86/amd/pmf: Use existing input event codes to update system states platform/x86: hp-wmi: Fix platform profile option switch bug on Omen and Victus laptops platform/x86:intel/pmc: Add support to undo ltr_ignore platform/x86:intel/pmc: Use the Elvis operator platform/x86:intel/pmc: Use DEFINE_SHOW_STORE_ATTRIBUTE macro platform/x86:intel/pmc: Remove unneeded min_t check platform/x86:intel/pmc: Add support to show ltr_ignore value platform/x86:intel/pmc: Move pmc assignment closer to first usage platform/x86:intel/pmc: Convert index variables to be unsigned platform/x86:intel/pmc: Simplify mutex usage with cleanup helpers platform/x86:intel/pmc: Use the return value of pmc_core_send_msg tools/power/x86/intel-speed-select: v1.20 release ...
2024-07-18Merge tag 'amd-drm-next-6.11-2024-07-12' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.11-2024-07-12: amdgpu: - RAS fixes - SMU fixes - GC 12 updates - SR-IOV fixes - IH 7 updates - DCC fixes - GC 11.5 fixes - DP MST fixes - GFX 9.4.4 fixes - SMU 14 updates - Documentation updates - MAINTAINERS updates - PSR SU fix - Misc small fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240712171637.2581787-1-alexander.deucher@amd.com
2024-07-17Merge tag 'ata-6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux Pull ata updates from Niklas Cassel: - ATA PASS-THROUGH sense data cleanups and fixes (Igor Pylypiv) Store the sense data for ATA PASS-THROUGH commands at the correct offset in the sense buffer when using fixed format sense data. Cleanup the logic related to generating sense data for PASS-THROUGH commands. Generating sense data for PASS-THROUGH commands would overwrite any eventual (real) sense data received from the device. Honor the D_SENSE bit when generating sense data for PASS-THROUGH commands. (The D_SENSE bit can be set by the user, and determines if the returned sense data should be in fixed format or descriptor format) - ata port allocation cleanups (me) Assign the ata port print_id at port allocation time, such that the ata_port_* print functions can be used earlier in the init call chain. Change the ata port port print_id to use ida_alloc(), such that print_ids will get reused on rmmod + modprobe, instead of being incremented indefinitely. Remove wrappers that only existed in order to export the internal libata functions which they wrapped, and instead export the libata functions directly. - Update SATA_MOBILE_LPM_POLICY Kconfig default to med_power_with_dipm (Mario Limonciello) Using this default was not always a good idea before, because it would break hot plug support. However, with LPM changes in recent kernels, a port marked as external will not enable LPM (in order to not break hot plug), so it is now safe to change the default value of this Kconfig. All major Linux distros have had SATA_MOBILE_LPM_POLICY set to med_power_with_dipm for quite a long time - Convert ahci-fsl-qoriq device tree binding to yaml format (Frank Li) * tag 'ata-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: dt-bindings: ata: ahci-fsl-qoriq: add fsl,ls1046a-ahci and fsl,ls1012a-ahci ata: ahci: Add debug print for external port ata,scsi: Remove wrapper ata_sas_port_alloc() ata: libata-core: Reuse available ata_port print_ids ata: libata: Assign print_id at port allocation time ata: libata-core: Remove local_port_no struct member ata: libata-sata: Remove superfluous assignment in ata_sas_port_alloc() ata: libata-core: Remove support for decreasing the number of ports ata: libata: Remove unused function declaration for ata_scsi_detect() ata,scsi: Remove wrappers ata_sas_tport_{add,delete}() ata: libata-scsi: Check ATA_QCFLAG_RTF_FILLED before using result_tf ata: libata-core: Set ATA_QCFLAG_RTF_FILLED in fill_result_tf() ata: libata-scsi: Do not pass ATA device id to ata_to_sense_error() ata: libata-scsi: Remove redundant sense_buffer memsets ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error ata: libata-scsi: Do not overwrite valid sense data when CK_COND=1 ata: libata-scsi: Fix offsets for the fixed format sense data dt-bindings: ata: ahci-fsl-qoriq: convert to yaml format ata: Kconfig: Update SATA_MOBILE_LPM_POLICY default to med_power_with_dipm
2024-07-17Merge tag 'dlm-6.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm updates from David Teigland: - New flag DLM_LSFL_SOFTIRQ_SAFE can be set by code using dlm to indicate callbacks can be run from softirq - Change md-cluster to set DLM_LSFL_SOFTIRQ_SAFE - Clean up for previous changes, e.g. unused code and parameters - Remove custom pre-allocation of rsb structs which is unnecessary with kmem caches - Change idr to xarray for lkb structs in use - Change idr to xarray for rsb structs being recovered - Change outdated naming related to internal rsb states - Fix some incorrect add/remove of rsb on scan list - Use rcu to free rsb structs * tag 'dlm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: add rcu_barrier before destroy kmem cache dlm: remove DLM_LSFL_SOFTIRQ from exflags fs: dlm: remove unused struct 'dlm_processed_nodes' md-cluster: use DLM_LSFL_SOFTIRQ for dlm_new_lockspace() dlm: implement LSFL_SOFTIRQ_SAFE dlm: introduce DLM_LSFL_SOFTIRQ_SAFE dlm: use LSFL_FS to check for kernel lockspace dlm: use rcu to avoid an extra rsb struct lookup dlm: fix add_scan and del_scan usage dlm: change list and timer names dlm: move recover idr to xarray datastructure dlm: move lkb idr to xarray datastructure dlm: drop own rsb pre allocation mechanism dlm: remove ls_local_handle from struct dlm_ls dlm: remove unused parameter in dlm_midcomms_addr dlm: don't kref_init rsbs created for toss list dlm: remove scand leftovers
2024-07-17power: sequencing: fix an invalid pointer dereference in error pathBartosz Golaszewski
We may end up calling pwrseq_target_free() on a partially initialized target object whose unit is either NULL or an ERR_PTR(). Avoid dereferencing invalid memory by adding an appropriate check to pwrseq_target_free(). Fixes: 249ebf3f65f8 ("power: sequencing: implement the pwrseq core") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-pm/62a3531e-9927-40f8-b587-254a2dfa47ef@stanley.mountain/ Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20240712194004.241939-1-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-07-17eth: fbnic: fix s390 build.Paolo Abeni
Building the fbnic nn s390, yield a build bug: In function ‘fbnic_config_drop_mode_rcq’, inlined from ‘fbnic_enable’ at drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:1836:4: ././include/linux/compiler_types.h:510:45: error: call to ‘__compiletime_assert_919’ declared with attribute error: FIELD_PREP: value too large for the field The relevant mask is 9 bits wide, and the related value is the cacheline aligned size of struct skb_shared_info. On s390 the cacheline size is 256 bytes, and skb_shared_info minimum size on 64 bits system is 320 bytes. Avoid building the driver for such arch. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/202407170432.dYJQOWVz-lkp@intel.com/ Reported-by: Nathan Chancellor <nathan@kernel.org> Fixes: 0cb4c0a13723 ("eth: fbnic: Implement Rx queue alloc/start/stop/free") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/5dfefd3e90e77828f38e68854b171a5b8b8c6ede.1721215379.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-17virtio: rename virtio_find_vqs_info() to virtio_find_vqs()Jiri Pirko
Since the original virtio_find_vqs() is no longer present, rename virtio_find_vqs_info() back to virtio_find_vqs(). Signed-off-by: Jiri Pirko <jiri@nvidia.com> Message-Id: <20240708074814.1739223-20-jiri@resnulli.us> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-17virtio: convert the rest virtio_find_vqs() users to virtio_find_vqs_info()Jiri Pirko
Instead of passing separate names and callbacks arrays to virtio_find_vqs(), have one of virtual_queue_info structs and pass it to virtio_find_vqs_info(). Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Message-Id: <20240708074814.1739223-18-jiri@resnulli.us> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-17virtio_balloon: convert to use virtio_find_vqs_info()Jiri Pirko
Instead of passing separate names and callbacks arrays to virtio_find_vqs(), have one of virtual_queue_info structs and pass it to virtio_find_vqs_info(). Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Message-Id: <20240708074814.1739223-17-jiri@resnulli.us> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-17scsi: virtio_scsi: convert to use virtio_find_vqs_info()Jiri Pirko
Instead of passing separate names and callbacks arrays to virtio_find_vqs(), allocate one of virtual_queue_info structs and pass it to virtio_find_vqs_info(). Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Message-Id: <20240708074814.1739223-15-jiri@resnulli.us> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-17virtio_net: convert to use virtio_find_vqs_info()Jiri Pirko
Instead of passing separate names and callbacks arrays to virtio_find_vqs_ctx(), allocate one of virtual_queue_info structs and pass it to virtio_find_vqs_info(). Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Message-Id: <20240708074814.1739223-14-jiri@resnulli.us> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-17virtio_crypto: convert to use virtio_find_vqs_info()Jiri Pirko
Instead of passing separate names and callbacks arrays to virtio_find_vqs(), allocate one of virtual_queue_info structs and pass it to virtio_find_vqs_info(). Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Message-Id: <20240708074814.1739223-13-jiri@resnulli.us> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-17virtio_console: convert to use virtio_find_vqs_info()Jiri Pirko
Instead of passing separate names and callbacks arrays to virtio_find_vqs(), allocate one of virtual_queue_info structs and pass it to virtio_find_vqs_info(). Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Message-Id: <20240708074814.1739223-12-jiri@resnulli.us> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-17virtio_blk: convert to use virtio_find_vqs_info()Jiri Pirko
Instead of passing separate names and callbacks arrays to virtio_find_vqs(), allocate one of virtual_queue_info structs and pass it to virtio_find_vqs_info(). Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Message-Id: <20240708074814.1739223-11-jiri@resnulli.us> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-17virtio: rename find_vqs_info() op to find_vqs()Jiri Pirko
Since the original find_vqs() is no longer present, rename find_vqs_info() back to find_vqs(). Signed-off-by: Jiri Pirko <jiri@nvidia.com> Message-Id: <20240708074814.1739223-10-jiri@resnulli.us> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-17virtio: convert find_vqs() op implementations to find_vqs_info()Jiri Pirko
Convert existing find_vqs() transport implementations to use find_vqs_info() config op. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Message-Id: <20240708074814.1739223-7-jiri@resnulli.us> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-17virtio_pci: convert vp_*find_vqs() ops to find_vqs_info()Jiri Pirko
Convert existing vp_find_vqs() and vp_modern_find_vqs() implementations to find_vqs_info() config op. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Message-Id: <20240708074814.1739223-6-jiri@resnulli.us> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-17caif_virtio: use virtio_find_single_vq() for single virtqueue findingJiri Pirko
Since caif uses only one queue, convert to virtio_find_single_vq() helper which is made for this purpose. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Message-Id: <20240708074814.1739223-2-jiri@resnulli.us> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-16Merge tag 'net-next-6.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Not much excitement - a handful of large patchsets (devmem among them) did not make it in time. Core & protocols: - Use local_lock in addition to local_bh_disable() to protect per-CPU resources in networking, a step closer for local_bh_disable() not to act as a big lock on PREEMPT_RT - Use flex array for netdevice priv area, ensure its cache alignment - Add a sysctl knob to allow user to specify a default rto_min at socket init time. Bit of a big hammer but multiple companies were independently carrying such patch downstream so clearly it's useful - Support scheduling transmission of packets based on CLOCK_TAI - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off using cpusets - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address - Allow configuration of multipath hash seed, to both allow synchronizing hashing of two routers, and preventing partial accidental sync - Improve TCP compliance with RFC 9293 for simultaneous connect() - Support sending NAT keepalives in IPsec ESP in UDP states. Userspace IKE daemon had to do this before, but the kernel can better keep track of it - Support sending supervision HSR frames with MAC addresses stored in ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled - Introduce IPPROTO_SMC for selecting SMC when socket is created - Allow UDP GSO transmit from devices with no checksum offload - openvswitch: add packet sampling via psample, separating the sampled traffic from "upcall" packets sent to user space for forwarding - nf_tables: shrink memory consumption for transaction objects Things we sprinkled into general kernel code: - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for QCA6390) [ Already merged separately - Linus ] - Add IRQ information in sysfs for auxiliary bus - Introduce guard definition for local_lock - Add aligned flavor of __cacheline_group_{begin, end}() markings for grouping fields in structures BPF: - Notify user space (via epoll) when a struct_ops object is getting detached/unregistered - Add new kfuncs for a generic, open-coded bits iterator - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and bpf_list_head - Support resilient split BTF which cuts down on duplication and makes BTF as compact as possible WRT BTF from modules - Add support for dumping kfunc prototypes from BTF which enables both detecting as well as dumping compilable prototypes for kfuncs - riscv64 BPF JIT improvements in particular to add 12-argument support for BPF trampolines and to utilize bpf_prog_pack for the latter - Add the capability to offload the netfilter flowtable in XDP layer through kfuncs Driver API: - Allow users to configure IRQ tresholds between which automatic IRQ moderation can choose - Expand Power Sourcing (PoE) status with power, class and failure reason. Support setting power limits - Track additional RSS contexts in the core, make sure configuration changes don't break them - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP data paths - Support updating firmware on SFP modules Tests and tooling: - mptcp: use net/lib.sh to manage netns - TCP-AO and TCP-MD5: replace debug prints used by tests with tracepoints - openvswitch: make test self-contained (don't depend on OvS CLI tools) Drivers: - Ethernet high-speed NICs: - Broadcom (bnxt): - increase the max total outstanding PTP TX packets to 4 - add timestamping statistics support - implement netdev_queue_mgmt_ops - support new RSS context API - Intel (100G, ice, idpf): - implement FEC statistics and dumping signal quality indicators - support E825C products (with 56Gbps PHYs) - nVidia/Mellanox: - support HW-GRO - mlx4/mlx5: support per-queue statistics via netlink - obey the max number of EQs setting in sub-functions - AMD/Solarflare: - support new RSS context API - AMD/Pensando: - ionic: rework fix for doorbell miss to lower overhead and skip it on new HW - Wangxun: - txgbe: support Flow Director perfect filters - Ethernet NICs consumer, embedded and virtual: - Add driver for Tehuti Networks TN40xx chips - Add driver for Meta's internal NIC chips - Add driver for Ethernet MAC on Airoha EN7581 SoCs - Add driver for Renesas Ethernet-TSN devices - Google cloud vNIC: - flow steering support - Microsoft vNIC: - support page sizes other than 4KB on ARM64 - vmware vNIC: - support latency measurement (update to version 9) - VirtIO net: - support for Byte Queue Limits - support configuring thresholds for automatic IRQ moderation - support for AF_XDP Rx zero-copy - Synopsys (stmmac): - support for STM32MP13 SoC - let platforms select the right PCS implementation - TI: - icssg-prueth: add multicast filtering support - icssg-prueth: enable PTP timestamping and PPS - Renesas: - ravb: improve Rx performance 30-400% by using page pool, theaded NAPI and timer-based IRQ coalescing - ravb: add MII support for R-Car V4M - Cadence (macb): - macb: add ARP support to Wake-On-LAN - Cortina: - use phylib for RX and TX pause configuration - Ethernet switches: - nVidia/Mellanox: - support configuration of multipath hash seed - report more accurate max MTU - use page_pool to improve Rx performance - MediaTek: - mt7530: add support for bridge port isolation - Qualcomm: - qca8k: add support for bridge port isolation - Microchip: - lan9371/2: add 100BaseTX PHY support - NXP: - vsc73xx: implement VLAN operations - Ethernet PHYs: - aquantia: enable support for aqr115c - aquantia: add support for PHY LEDs - realtek: add support for rtl8224 2.5Gbps PHY - xpcs: add memory-mapped device support - add BroadR-Reach link mode and support in Broadcom's PHY driver - CAN: - add document for ISO 15765-2 protocol support - mcp251xfd: workaround for erratum DS80000789E, use timestamps to catch when device returns incorrect FIFO status - WiFi: - mac80211/cfg80211: - parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers - improvements for 6 GHz regulatory flexibility - multi-link improvements - support multiple radios per wiphy - remove DEAUTH_NEED_MGD_TX_PREP flag - Intel (iwlwifi): - bump FW API to 91 for BZ/SC devices - report 64-bit radiotap timestamp - enable P2P low latency by default - handle Transmit Power Envelope (TPE) advertised by AP - remove support for older FW for new devices - fast resume (keeping the device configured) - mvm: re-enable Multi-Link Operation (MLO) - aggregation (A-MSDU) optimizations - MediaTek (mt76): - mt7925 Multi-Link Operation (MLO) support - Qualcomm (ath10k): - LED support for various chipsets - Qualcomm (ath12k): - remove unsupported Tx monitor handling - support channel 2 in 6 GHz band - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) - support dynamic VLAN - add panic handler for resetting the firmware state - DebugFS support for datapath statistics - WCN7850: support for Wake on WLAN - Microchip (wilc1000): - read MAC address during probe to make it visible to user space - suspend/resume improvements - TI (wl18xx): - support newer firmware versions - RealTek (rtw89): - preparation for RTL8852BE-VT support - Wake on WLAN support for WiFi 6 chips - 36-bit PCI DMA support - RealTek (rtlwifi): - RTL8192DU support - Broadcom (brcmfmac): - Management Frame Protection support (to enable WPA3) - Bluetooth: - qualcomm: use the power sequencer for QCA6390 - btusb: mediatek: add ISO data transmission functions - hci_bcm4377: add BCM4388 support - btintel: add support for BlazarU core - btintel: add support for Whale Peak2 - btnxpuart: add support for AW693 A1 chipset - btnxpuart: add support for IW615 chipset - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591" * tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits) eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering" tcp: Replace strncpy() with strscpy() wifi: ath12k: fix build vs old compiler tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child(). eth: fbnic: Write the TCAM tables used for RSS control and Rx to host eth: fbnic: Add L2 address programming eth: fbnic: Add basic Rx handling eth: fbnic: Add basic Tx handling eth: fbnic: Add link detection eth: fbnic: Add initial messaging to notify FW of our presence eth: fbnic: Implement Rx queue alloc/start/stop/free eth: fbnic: Implement Tx queue alloc/start/stop/free eth: fbnic: Allocate a netdevice and napi vectors with queues eth: fbnic: Add FW communication mechanism eth: fbnic: Add message parsing for FW messages eth: fbnic: Add register init to set PCIe/Ethernet device config eth: fbnic: Allocate core device specific structures and devlink interface eth: fbnic: Add scaffolding for Meta's NIC driver PCI: Add Meta Platforms vendor ID net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK ...
2024-07-16Merge tag 'linux_kselftest-kunit-6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit updates from Shuah Khan: - add vm_mmap() allocation resource manager - convert usercopy kselftest to KUnit - disable usercopy testing on !CONFIG_MMU - add MODULE_DESCRIPTION() to core, list, and usercopy tests - add tests for assertion formatting functions - assert.c - introduce KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros - fix KUNIT_ASSERT_STRNEQ comments to make it clear that it is an assertion - rename KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT * tag 'linux_kselftest-kunit-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: Introduce KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros kunit: Rename KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT for readability kunit: Fix the comment of KUNIT_ASSERT_STRNEQ as assertion kunit: executor: Simplify string allocation handling kunit/usercopy: Add missing MODULE_DESCRIPTION() kunit/usercopy: Disable testing on !CONFIG_MMU usercopy: Convert test_user_copy to KUnit test kunit: test: Add vm_mmap() allocation resource manager list: test: add the missing MODULE_DESCRIPTION() macro kunit: add missing MODULE_DESCRIPTION() macros to core modules list: test: remove unused struct 'klist_test_struct' kunit: Cover 'assert.c' with tests
2024-07-16firmware: qcom: tzmem: don't ask about allocator mode when not enabledLinus Torvalds
The Qualcomm firmware code shouldn't ask about what memory allocator mode should be used when the code isn't even enabled. Get rid of pointless config-time question. Link: https://lore.kernel.org/all/CAHk-=wg+38EHPKGou1MqXwAAXC30cM8sMgZAGnZ7TcFO4L9J2w@mail.gmail.com/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-07-16Merge tag 'acpi-6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "The only kind of new feature added by these is the hwmon interface support in the ACPI fan driver. Apart from that, they mostly address issues and clean up code. Specifics: - Switch the ACPI x86 utility code and the ACPI LPSS driver to new Intel CPU model defines (Tony Luck) - Add hwmon interface support to the ACPI fan driver (Armin Wolf) - Add sysfs entry for guaranteed performance to the ACPI CPPC library and replace a ternary operator with umax() in it (Petr Tesařík, Prabhakar Pujeri) - Clean up the ACPI PMIC driver in multiple ways (Andy Shevchenko, Christophe JAILLET) - Add support for charge limiting state to the ACPI battery driver and update _OSC to indicate support for it (Armin Wolf) - Clean up the sysfs interface in the ACPI battery, SBS (smart battery subsystem) and AC drivers (Thomas Weißschuh) - Coordinate header includes in the ACPI NUMA code and make it use ACCESS_COORDINATE_CPU when appropriate (Huang Ying, Thorsten Blum) - Downgrade Intel _OSC and _PDC messages in the ACPI processor driver to debug to reduce log noise (Mario Limonciello) - Still evaluate _OST when _PUR evaluation fails in the ACPI PAD (processor aggregator) driver as per the spec (Armin Wolf) - Skip ACPI IRQ override on Asus Vivobook Pro N6506MJ and N6506MU platforms (Tamim Khan) - Force native mode on some T2 macbooks in the ACPI backlight driver and replace strcpy() with strscpy() in it (Orlando Chamberlain, Muhammad Qasim Abdul Majeed) - Add missing MODULE_DESCRIPTION() macros in two places (Jeff Johnson)" * tag 'acpi-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (26 commits) ACPI: resource: Skip IRQ override on Asus Vivobook Pro N6506MJ ACPI: video: force native for some T2 macbooks ACPI: video: Use strscpy() instead of strcpy() ACPI: CPPC: Replace ternary operator with umax() ACPI: resource: Skip IRQ override on Asus Vivobook Pro N6506MU ACPI: PMIC: Constify struct pmic_table ACPI: bus: Indicate support for battery charge limiting thru _OSC ACPI: battery: Add support for charge limiting state ACPI: processor: Downgrade Intel _OSC and _PDC messages to debug ACPI: SBS: manage alarm sysfs attribute through psy core ACPI: battery: create alarm sysfs attribute atomically ACPI: battery: use sysfs_emit over sprintf ACPI: battery: constify powersupply properties ACPI: SBS: constify powersupply properties ACPI: AC: constify powersupply properties ACPI: PMIC: Replace open coded be16_to_cpu() ACPI: PMIC: Convert pr_*() to dev_*() printing macros ACPI: PMIC: Use sizeof() instead of hard coded value ACPI: NUMA: Consolidate header includes ACPI: CPPC: add sysfs entry for guaranteed performance ...
generated by cgit (git 2.34.1) at 2025-09-24 22:42:34 +0000