| Age | Commit message (Collapse) | Author |
|---|
|
This makes the driver work with the new check in
v4l2_async_register_subdev() that was introduced recently in 6.6-rc1.
Without this change, probe fails with:
ov8858 1-0036: Detected OV8858 sensor, revision 0xb2
ov8858 1-0036: sub-device fwnode is an endpoint!
ov8858 1-0036: v4l2 async register subdev failed
ov8858: probe of 1-0036 failed with error -22
This also simplifies the driver a bit.
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
In ipu_bridge_get_ivsc_acpi_dev(), the "ivsc_adev" acpi_device pointer
from the outer loop is handed over to the caller, which takes proper
care of its reference count.
However, the "consumer" acpi_device pointer from the inner loop is lost,
without decrementing its reference count.
Fix this by adding the missing call to acpi_dev_put().
Fixes: c66821f381ae ("media: pci: intel: Add IVSC support for IPU bridge driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The big V4L2 async framework overhaul simplified linked lists used by the
V4L2 async framework. This affected a few drivers and it turns out a few
of those drivers rely on searching for entities in both async notifier's
waiting and done lists. Do that by separately traversing both.
Fixes: 9bf19fbf0c8b ("media: v4l: async: Rework internal lists")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
disabled
Since the stream API is still experimental it is currently locked away
behind the internal, default disabled, v4l2_subdev_enable_streams_api flag.
Advertising V4L2_SUBDEV_CAP_STREAMS when the streams API is disabled
confuses userspace. E.g. it causes the following libcamera error:
ERROR SimplePipeline simple.cpp:1497 Failed to reset routes for
/dev/v4l-subdev1: Inappropriate ioctl for device
Don't report V4L2_SUBDEV_CAP_STREAMS when the streams API is disabled
to avoid problems like this.
Reported-by: Dennis Bonke <admin@dennisbonke.com>
Fixes: 9a6b5bf4c1bb ("media: add V4L2_SUBDEV_CAP_STREAMS")
Cc: stable@vger.kernel.org # for >= 6.3
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, the core is msm and amdgpu with some scattered fixes
across vmwgfx, panel and the core stuff.
atomic-helper:
- Relax checks for unregistered connectors
dma-buf:
- Work around race condition when retrieving fence timestamp
gem:
- Avoid OOB access in BO memory range
panel:
- boe-tv101wun-ml6: Fix flickering
simpledrm:
- Fix error output
vwmgfx:
- Fix size calculation in texture-state code
- Ref GEM BOs in surfaces
msm:
- PHY/link training reset fix
- msm8998 - correct highest bank bit
- skip video mode if timing engine disabled
- check irq_of_parse_and_map return code
- add new lines to some prints
- fail atomic check for max mdp clk test
amdgpu:
- Seamless boot fix
- Fix TTM BO resource check
- SI fix for doorbell handling"
* tag 'drm-fixes-2023-10-13' of git://anongit.freedesktop.org/drm/drm:
drm/tiny: correctly print `struct resource *` on error
drm: Do not overrun array in drm_gem_get_pages()
drm/atomic-helper: relax unregistered connector check
drm/panel: boe-tv101wum-nl6: Completely pull GPW to VGL before TP term
drm/amdgpu: fix SI failure due to doorbells allocation
drm/amdgpu: add missing NULL check
drm/amd/display: Don't set dpms_off for seamless boot
drm/vmwgfx: Keep a gem reference to user bos in surfaces
drm/vmwgfx: fix typo of sizeof argument
drm/msm/dpu: fail dpu_plane_atomic_check() based on mdp clk limits
dma-buf: add dma_fence_timestamp helper
drm/msm/dp: Add newlines to debug printks
drm/msm/dpu: change _dpu_plane_calc_bw() to use u64 to avoid overflow
drm/msm/dsi: fix irq_of_parse_and_map() error checking
drm/msm/dsi: skip the wait for video mode done if not applicable
drm/msm/mdss: fix highest-bank-bit for msm8998
drm/msm/dp: do not reinitialize phy unless retry during link training
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.6-2023-10-11:
amdgpu:
- Seemless boot fix
- Fix TTM BO resource check
- SI fix for doorbell handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012025637.7783-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.6-rc5
- fix to not reset the PHY everytime we start link training but only
do it if link training fails. Without this, the PLL unlocked
interrupt fires causing "Unexpected DP AUX IRQ 0x01000000 when
not busy" spam in the logs since last 2-3 cycles
- correct the highest bank bit to match downstream device tree for
msm8998
- skip the video mode wait if the timing engine is not enabled. This
was introduced after pre_enable flag for DSI video mode panels
where we would end up waiting for the video mode done interrupt
even before enabling timing engine causing error spam and long
bootup times.
- check the correct return code of irq_of_parse_and_map() in DSI code
- avoid overflow issues in the dpu bandwidth calculation . This was
exposed for high resolution displays and a critical fix to avoid
atomic_check failure
- minor fix to add new lines in DP print messages.
- Fix to fail atomic_check() if the resolution exceeds max mdp clk.
This leads to underflow otherwise if we try to allow that frame.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv-HNxQ=VBtZ8geGzYJum9jtManEdbvhcjo_WWF_J9Ziw@mail.gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- qcom_battmgr: endianness fixes
* tag 'for-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: qcom_battmgr: fix enable request endianness
power: supply: qcom_battmgr: fix battery_id type
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* atomic-helper: Relax checks for unregistered connectors
* dma-buf: Work around race condition when retrieving fence timestamp
* gem: Avoid OOB access in BO memory range
* panel:
* boe-tv101wun-ml6: Fix flickering
* simpledrm: Fix error output
* vwmgfx:
* Fix size calculation in texture-state code
* Ref GEM BOs in surfaces
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012111638.GA25037@linux-uq9g
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN and BPF.
We have a regression in TC currently under investigation, otherwise
the things that stand off most are probably the TCP and AF_PACKET
fixes, with both issues coming from 6.5.
Previous releases - regressions:
- af_packet: fix fortified memcpy() without flex array.
- tcp: fix crashes trying to free half-baked MTU probes
- xdp: fix zero-size allocation warning in xskq_create()
- can: sja1000: always restart the tx queue after an overrun
- eth: mlx5e: again mutually exclude RX-FCS and RX-port-timestamp
- eth: nfp: avoid rmmod nfp crash issues
- eth: octeontx2-pf: fix page pool frag allocation warning
Previous releases - always broken:
- mctp: perform route lookups under a RCU read-side lock
- bpf: s390: fix clobbering the caller's backchain in the trampoline
- phy: lynx-28g: cancel the CDR check work item on the remove path
- dsa: qca8k: fix qca8k driver for Turris 1.x
- eth: ravb: fix use-after-free issue in ravb_tx_timeout_work()
- eth: ixgbe: fix crash with empty VF macvlan list"
* tag 'net-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
rswitch: Fix imbalance phy_power_off() calling
rswitch: Fix renesas_eth_sw_remove() implementation
octeontx2-pf: Fix page pool frag allocation warning
nfc: nci: assert requested protocol is valid
af_packet: Fix fortified memcpy() without flex array.
net: tcp: fix crashes trying to free half-baked MTU probes
net/smc: Fix pos miscalculation in statistics
nfp: flower: avoid rmmod nfp crash issues
net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read
ethtool: Fix mod state of verbose no_mask bitset
net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn()
mctp: perform route lookups under a RCU read-side lock
net: skbuff: fix kernel-doc typos
s390/bpf: Fix unwinding past the trampoline
s390/bpf: Fix clobbering the caller's backchain in the trampoline
net/mlx5e: Again mutually exclude RX-FCS and RX-port-timestamp
net/smc: Fix dependency of SMC on ISM
ixgbe: fix crash with empty VF macvlan list
net/mlx5e: macsec: use update_pn flag instead of PN comparation
net: phy: mscc: macsec: reject PN update requests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"AngeloGioacchino Del Regno is stepping in as co-maintainer for the
MediaTek SoC platform and starts by sending some dts fixes for the
mt8195 platform that had been pending for a while.
On the ixp4xx platform, Krzysztof Halasa steps down as co-maintainer,
reflecting that Linus Walleij has been handling this on his own for
the past few years.
Generic RISC-V kernels are now marked as incompatible with the RZ/Five
platform that requires custom hacks both for managing its DMA bounce
buffers and for addressing low virtual memory.
Finally, there is one bugfix for the AMDTEE firmware driver to prevent
a use-after-free bug"
* tag 'soc-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
IXP4xx MAINTAINERS entries
arm64: dts: mediatek: mt8195: Set DSU PMU status to fail
arm64: dts: mediatek: fix t-phy unit name
arm64: dts: mediatek: mt8195-demo: update and reorder reserved memory regions
arm64: dts: mediatek: mt8195-demo: fix the memory size to 8GB
MAINTAINERS: Add Angelo as MediaTek SoC co-maintainer
soc: renesas: Make ARCH_R9A07G043 (riscv version) depend on NONPORTABLE
tee: amdtee: fix use-after-free vulnerability in amdtee_close_session
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fix from Ulf Hansson:
- imx: scu-pd: Correct the DMA2 channel
* tag 'pmdomain-v6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: scu-pd: correct DMA2 channel
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some pin control fixes for v6.6 which have been stacking up in my
tree.
Dmitry's fix to some locking in the core is the most substantial, that
was a really neat fix.
The rest is the usual assorted spray of minor driver fixes.
- Drop some minor code causing warnings in the Lantiq driver
- Fix out of bounds write in the Nuvoton driver
- Fix lost IRQs with CONFIG_PM in the Starfive driver
- Fix a locking issue in find_pinctrl()
- Revert a regressive Tegra debug patch
- Fix the Renesas RZN1 pin muxing"
* tag 'pinctrl-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: renesas: rzn1: Enable missing PINMUX
Revert "pinctrl: tegra: Add support to display pin function"
pinctrl: avoid unsafe code pattern in find_pinctrl()
pinctrl: starfive: jh7110: Add system pm ops to save and restore context
pinctrl: starfive: jh7110: Fix failure to set irq after CONFIG_PM is enabled
pinctrl: nuvoton: wpcm450: fix out of bounds write
pinctrl: lantiq: Remove unsued declaration ltq_pinctrl_unregister()
|
|
The phy_power_off() should not be called if phy_power_on() failed.
So, add a condition .power_count before calls phy_power_off().
Fixes: 5cb630925b49 ("net: renesas: rswitch: Add phy_power_{on,off}() calling")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix functions calling order and a condition in renesas_eth_sw_remove().
Otherwise, kernel NULL pointer dereference happens from phy_stop() if
a net device opens.
Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The `res` variable is already a `struct resource *`, don't take the address of it.
Fixes incorrect output:
simple-framebuffer 9e20dc000.framebuffer: [drm] *ERROR* could not acquire memory range [??? 0xffff4be88a387d00-0xfffffefffde0a240 flags 0x0]: -16
To be correct:
simple-framebuffer 9e20dc000.framebuffer: [drm] *ERROR* could not acquire memory range [mem 0x9e20dc000-0x9e307bfff flags 0x200]: -16
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Fixes: 9a10c7e6519b ("drm/simpledrm: Add support for system memory framebuffers")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.3+
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231010174652.2439513-1-joey.gouly@arm.com
|
|
If the shared memory object is larger than the DRM object that it backs,
we can overrun the page array. Limit the number of pages we install
from each folio to prevent this.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Link: https://lore.kernel.org/lkml/13360591.uLZWGnKmhe@natalenko.name/
Fixes: 3291e09a4638 ("drm: convert drm_gem_put_pages() to use a folio_batch")
Cc: stable@vger.kernel.org # 6.5.x
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231005135648.2317298-1-willy@infradead.org
|
|
Since page pool param's "order" is set to 0, will result
in below warn message if interface is configured with higher
rx buffer size.
Steps to reproduce the issue.
1. devlink dev param set pci/0002:04:00.0 name receive_buffer_size \
value 8196 cmode runtime
2. ifconfig eth0 up
[ 19.901356] ------------[ cut here ]------------
[ 19.901361] WARNING: CPU: 11 PID: 12331 at net/core/page_pool.c:567 page_pool_alloc_frag+0x3c/0x230
[ 19.901449] pstate: 82401009 (Nzcv daif +PAN -UAO +TCO -DIT +SSBS BTYPE=--)
[ 19.901451] pc : page_pool_alloc_frag+0x3c/0x230
[ 19.901453] lr : __otx2_alloc_rbuf+0x60/0xbc [rvu_nicpf]
[ 19.901460] sp : ffff80000f66b970
[ 19.901461] x29: ffff80000f66b970 x28: 0000000000000000 x27: 0000000000000000
[ 19.901464] x26: ffff800000d15b68 x25: ffff000195b5c080 x24: ffff0002a5a32dc0
[ 19.901467] x23: ffff0001063c0878 x22: 0000000000000100 x21: 0000000000000000
[ 19.901469] x20: 0000000000000000 x19: ffff00016f781000 x18: 0000000000000000
[ 19.901472] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 19.901474] x14: 0000000000000000 x13: ffff0005ffdc9c80 x12: 0000000000000000
[ 19.901477] x11: ffff800009119a38 x10: 4c6ef2e3ba300519 x9 : ffff800000d13844
[ 19.901479] x8 : ffff0002a5a33cc8 x7 : 0000000000000030 x6 : 0000000000000030
[ 19.901482] x5 : 0000000000000005 x4 : 0000000000000000 x3 : 0000000000000a20
[ 19.901484] x2 : 0000000000001080 x1 : ffff80000f66b9d4 x0 : 0000000000001000
[ 19.901487] Call trace:
[ 19.901488] page_pool_alloc_frag+0x3c/0x230
[ 19.901490] __otx2_alloc_rbuf+0x60/0xbc [rvu_nicpf]
[ 19.901494] otx2_rq_aura_pool_init+0x1c4/0x240 [rvu_nicpf]
[ 19.901498] otx2_open+0x228/0xa70 [rvu_nicpf]
[ 19.901501] otx2vf_open+0x20/0xd0 [rvu_nicvf]
[ 19.901504] __dev_open+0x114/0x1d0
[ 19.901507] __dev_change_flags+0x194/0x210
[ 19.901510] dev_change_flags+0x2c/0x70
[ 19.901512] devinet_ioctl+0x3a4/0x6c4
[ 19.901515] inet_ioctl+0x228/0x240
[ 19.901518] sock_ioctl+0x2ac/0x480
[ 19.901522] __arm64_sys_ioctl+0x564/0xe50
[ 19.901525] invoke_syscall.constprop.0+0x58/0xf0
[ 19.901529] do_el0_svc+0x58/0x150
[ 19.901531] el0_svc+0x30/0x140
[ 19.901533] el0t_64_sync_handler+0xe8/0x114
[ 19.901535] el0t_64_sync+0x1a0/0x1a4
[ 19.901537] ---[ end trace 678c0bf660ad8116 ]---
Fixes: b2e3406a38f0 ("octeontx2-pf: Add support for page pool")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Link: https://lore.kernel.org/r/20231010034842.3807816-1-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Enable pin muxing (eg. programmable function), so that the RZ/N1 GPIO
pins will be configured as specified by the pinmux in the DTS.
This used to be enabled implicitly via CONFIG_GENERIC_PINMUX_FUNCTIONS,
however that was removed, since the RZ/N1 driver does not call any of
the generic pinmux functions.
Fixes: 1308fb4e4eae14e6 ("pinctrl: rzn1: Do not select GENERIC_PIN{CTRL_GROUPS,MUX_FUNCTIONS}")
Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231004200008.1306798-1-ralph.siemsen@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2023-10-10
Just one small fix this time around.
Dinghao Liu fixed a potential use-after-free in the ca8210 driver probe
function.
* tag 'ieee802154-for-net-2023-10-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan:
ieee802154: ca8210: Fix a potential UAF in ca8210_probe
====================
Link: https://lore.kernel.org/r/20231010200943.82225-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
- Three fixes for the pata_parport driver to address a typo in the
code, a missing operation implementation and port reset handling in
the presence of slave devices (Ondrej)
- Fix handling of ATAPI devices reset with the fit3 protocol driver of
the pata_parport driver (Ondrej)
- A follow up fix for the recent suspend/resume corrections to avoid
attempting rescanning on resume the scsi device associated with an
ata disk when the request queue of the scsi device is still suspended
(in addition to not doing the rescan if the scsi device itself is
still suspended) (me)
* tag 'ata-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
scsi: Do not rescan devices with a suspended queue
ata: pata_parport: fit3: implement IDE command set registers
ata: pata_parport: add custom version of wait_after_reset
ata: pata_parport: implement set_devctl
ata: pata_parport: fix pata_parport_devchk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- regression fix for i2c-hid when used on DT platforms (Johan Hovold)
- kernel crash fix on removal of the Logitech USB receiver (Hans de
Goede)
* tag 'for-linus-2023101101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: logitech-hidpp: Fix kernel crash on receiver USB disconnect
HID: i2c-hid: fix handling of unpopulated devices
|
|
When there are CT table entries, and you rmmod nfp, the following
events can happen:
task1：
nfp_net_pci_remove
↓
nfp_flower_stop->(asynchronous)tcf_ct_flow_table_cleanup_work(3)
↓
nfp_zone_table_entry_destroy(1)
task2：
nfp_fl_ct_handle_nft_flow(2)
When the execution order is (1)->(2)->(3), it will crash. Therefore, in
the function nfp_fl_ct_del_flow, nf_flow_table_offload_del_cb needs to
be executed synchronously.
At the same time, in order to solve the deadlock problem and the problem
of rtnl_lock sometimes failing, replace rtnl_lock with the private
nfp_fl_lock.
Fixes: 7cc93d888df7 ("nfp: flower-ct: remove callback delete deadlock")
Cc: stable@vger.kernel.org
Signed-off-by: Yanguo Li <yanguo.li@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot has found an uninit-value bug triggered by the dm9601 driver [1].
This error happens because the variable res is not updated if the call
to dm_read_shared_word returns an error. In this particular case -EPROTO
was returned and res stayed uninitialized.
This can be avoided by checking the return value of dm_read_shared_word
and propagating the error if the read operation failed.
[1] https://syzkaller.appspot.com/bug?extid=1f53a30781af65d2c955
Cc: stable@vger.kernel.org
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reported-and-tested-by: syzbot+1f53a30781af65d2c955@syzkaller.appspotmail.com
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Fixes: d0374f4f9c35cdfbee0 ("USB: Davicom DM9601 usbnet driver")
Link: https://lore.kernel.org/r/20231009-topic-dm9601_uninit_mdio_read-v2-1-f2fe39739b6c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2023-10-09
Lukas Magel's patch for the CAN ISO-TP protocol fixes the TX state
detection and wait behavior.
John Watts contributes a patch to only show the sun4i_can Kconfig
option on ARCH_SUNXI.
A patch by Miquel Raynal fixes the soft-reset workaround for Renesas
SoCs in the sja1000 driver.
Markus Schneider-Pargmann's patch for the tcan4x5x m_can glue driver
fixes the id2 register for the tcan4553.
2 patches by Haibo Chen fix the flexcan stop mode for the imx93 SoC.
* tag 'linux-can-fixes-for-6.6-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: tcan4x5x: Fix id2_register for tcan4553
can: flexcan: remove the auto stop mode for IMX93
can: sja1000: Always restart the Tx queue after an overrun
arm64: dts: imx93: add the Flex-CAN stop mode by GPR
can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set
can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
====================
Link: https://lore.kernel.org/r/20231009085256.693378-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A fix for the xen events driver:
Closing of an event channel in the Linux kernel can result in a
deadlock. This happens when the close is being performed in parallel
to an unrelated Xen console action and the handling of a Xen console
interrupt in an unprivileged guest.
The closing of an event channel is e.g. triggered by removal of a
paravirtual device on the other side. As this action will cause
console messages to be issued on the other side quite often, the
chance of triggering the deadlock is not negligible"
* tag 'xsa441-6.6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: replace evtchn_rwlock with RCU
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of updates for interrupt chip drivers:
- Fix the fail of the Qualcomm PDC driver on v3.2 hardware which is
caused by a control bit being moved to a different location
- Update the SM8150 device tree PDC resource so the version register
can be read
- Make the Renesas RZG2L driver correct for interrupts which are
outside of the LSB in the TSSR register by using the proper macro
for calculating the mask
- Document the Renesas RZ2GL device tree binding correctly and update
them for a few devices which faul to boot otherwise
- Use the proper accessor in the RZ2GL driver instead of blindly
dereferencing an unchecked pointer
- Make GICv3 handle the dma-non-coherent attribute correctly
- Ensure that all interrupt controller nodes on RISCV are marked as
initialized correctly
Maintainer changes:
- Add a new entry for GIC interrupt controllers and assign Marc
Zyngier as the maintainer
- Remove Marc Zyngier from the core and driver maintainer entries as
he is burried in work and short of time to handle that.
Thanks to Marc for all the great work he has done in the past couple
of years!
Also note that commit 5873d380f4c0 ("irqchip/qcom-pdc: Add support for
v3.2 HW") has a incorrect SOB chain.
The real author is Neil. His patch was posted by Dmitry once and Neil
picked it up from the list and reposted it with the bogus SOB chain.
Not a big deal, but worth to mention. I wanted to fix that up, but
then got distracted and Marc piled more changes on top. So I decided
to leave it as is instead of rebasing world"
* tag 'irq-urgent-2023-10-10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Remove myself from the general IRQ subsystem maintenance
MAINTAINERS: Add myself as the ARM GIC maintainer
irqchip/renesas-rzg2l: Convert to irq_data_get_irq_chip_data()
irqchip/stm32-exti: add missing DT IRQ flag translation
irqchip/riscv-intc: Mark all INTC nodes as initialized
irqchip/gic-v3: Enable non-coherent redistributors/ITSes DT probing
irqchip/gic-v3-its: Split allocation from initialisation of its_node
dt-bindings: interrupt-controller: arm,gic-v3: Add dma-noncoherent property
dt-bindings: interrupt-controller: renesas,irqc: Add r8a779f0 support
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G2UL SoC
irqchip: renesas-rzg2l: Fix logic to clear TINT interrupt source
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update description for '#interrupt-cells' property
arm64: dts: qcom: sm8150: extend the size of the PDC resource
irqchip/qcom-pdc: Add support for v3.2 HW
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix a regression in dm-crypt"
* tag 'v6.6-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
dm crypt: Fix reqsize in crypt_iv_eboiv_gen
|
|
Commit 1e66220948df8 ("net/mlx5e: Update rx ring hw mtu upon each rx-fcs
flag change") seems to have accidentally inverted the logic added in
commit 0bc73ad46a76 ("net/mlx5e: Mutually exclude RX-FCS and
RX-port-timestamp").
The impact of this is a little unclear since it seems the FCS scattered
with RX-FCS is (usually?) correct regardless.
Fixes: 1e66220948df8 ("net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change")
Tested-by: Charlotte Tan <charlotte@extrahop.com>
Reviewed-by: Charlotte Tan <charlotte@extrahop.com>
Cc: Adham Faris <afaris@nvidia.com>
Cc: Aya Levin <ayal@nvidia.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Cc: Moshe Shemesh <moshe@nvidia.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Will Mortensen <will@extrahop.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20231006053706.514618-1-will@extrahop.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The driver might pull connectors which weren't submitted by
user-space into the atomic state. For instance,
intel_dp_mst_atomic_master_trans_check() pulls in connectors
sharing the same DP-MST stream. However, if the connector is
unregistered, this later fails with:
[ 559.425658] i915 0000:00:02.0: [drm:drm_atomic_helper_check_modeset] [CONNECTOR:378:DP-7] is not registered
Skip the unregistered connector check to allow user-space to turn
off connectors one-by-one.
See this wlroots issue:
https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3407
Previous discussion:
https://lore.kernel.org/intel-gfx/Y6GX7z17WmDSKwta@ideak-desk.fi.intel.com/
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231005131623.114379-1-contact@emersion.fr
|
|
When the SMC protocol is built into the kernel proper while ISM is
configured to be built as module, linking the kernel fails due to
unresolved dependencies out of net/smc/smc_ism.o to
ism_get_smcd_ops, ism_register_client, and ism_unregister_client
as reported via the linux-next test automation (see link).
This however is a bug introduced a while ago.
Correct the dependency list in ISM's and SMC's Kconfig to reflect the
dependencies that are actually inverted. With this you cannot build a
kernel with CONFIG_SMC=y and CONFIG_ISM=m. Either ISM needs to be 'y',
too - or a 'n'. That way, SMC can still be configured on non-s390
architectures that do not have (nor need) an ISM driver.
Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/linux-next/d53b5b50-d894-4df8-8969-fd39e63440ae@infradead.org/
Co-developed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20231006125847.1517840-1-gbayer@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The adapter->vf_mvs.l list needs to be initialized even if the list is
empty. Otherwise it will lead to crashes.
Fixes: a1cbb15c1397 ("ixgbe: Add macvlan support for VF")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/ZSADNdIw8zFx1xw2@kadam
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The sta_himax83102 panel sometimes shows abnormally flickering
horizontal lines. The front gate output will precharge the X point of
the next pole circuit before TP(TouchPanel Enable) term starts, and wait
until the end of the TP term to resume the CLK. For this reason, the X
point must be maintained during the TP term. In abnormal case, we
measured a slight leakage at point X. This because during the TP term,
the GPW does not fully pull the VGL low, causing the TFT to not be
closed tightly.
To fix this, we completely pull GPW to VGL before entering the TP term.
This will ensure that the TFT is closed tightly and prevent the abnormal
display.
Fixes: 1bc2ef065f13 ("drm/panel: Support for Starry-himax83102-j02 TDDI MIPI-DSI panel")
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231007064949.22668-1-zhouruihai@huaqin.corp-partner.google.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231007064949.22668-1-zhouruihai@huaqin.corp-partner.google.com
|
|
When updating the SA, use the new update_pn flags instead of comparing the
new PN with the initial one.
Comparing the initial PN value with the new value will allow the user
to update the SA using the initial PN value as a parameter like this:
$ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \
ead3664f508eb06c40ac7104cdae4ce5
$ ip macsec set macsec0 tx sa 0 pn 1 off
Fixes: 8ff0ac5be144 ("net/mlx5: Add MACsec offload Tx command support")
Fixes: aae3454e4d4c ("net/mlx5e: Add MACsec offload Rx command support")
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Updating the PN is not supported.
Return -EINVAL if update_pn is true.
The following command succeeded, but it should fail because the driver
does not update the PN:
ip macsec set macsec0 tx sa 0 pn 232 on
Fixes: 28c5107aa904 ("net: phy: mscc: macsec support")
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When updating SA, update the PN only when the update_pn flag is true.
Otherwise, the PN will be reset to its previous value using the
following command and this should not happen:
$ ip macsec set macsec0 tx sa 0 on
Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Indicate next PN update using update_pn flag in macsec_context.
Offloaded MACsec implementations does not know whether or not the
MACSEC_SA_ATTR_PN attribute was passed for an SA update and assume
that next PN should always updated, but this is not always true.
The PN can be reset to its initial value using the following command:
$ ip macsec set macsec0 tx sa 0 off #octeontx2-pf case
Or, the update PN command will succeed even if the driver does not support
PN updates.
$ ip macsec set macsec0 tx sa 0 pn 1 on #mscc phy driver case
Comparing the initial PN with the new PN value is not a solution. When
the user updates the PN using its initial value the command will
succeed, even if the driver does not support it. Like this:
$ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \
ead3664f508eb06c40ac7104cdae4ce5
$ ip macsec set macsec0 tx sa 0 pn 1 on #mlx5 case
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit ff48b37802e5 ("scsi: Do not attempt to rescan suspended devices")
modified scsi_rescan_device() to avoid attempting rescanning a suspended
device. However, the modification added a check to verify that a SCSI
device is in the running state without checking if the device request
queue (in the case of block device) is also running, thus allowing the
exectuion of internal requests. Without checking the device request
queue, commit ff48b37802e5 fix is incomplete and deadlocks on resume can
still happen. Use blk_queue_pm_only() to check if the device request
queue allows executing commands in addition to checking the SCSI device
state.
Reported-by: Petr Tesarik <petr@tesarici.cz>
Fixes: ff48b37802e5 ("scsi: Do not attempt to rescan suspended devices")
Cc: stable@vger.kernel.org
Tested-by: Petr Tesarik <petr@tesarici.cz>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
fit3 protocol driver does not support accessing IDE control registers
(device control/altstatus). The DOS driver does not use these registers
either (as observed from DOSEMU trace). But the HW seems to be capable
of accessing these registers - I simply tried bit 3 and it works!
The control register is required to properly reset ATAPI devices or
they will be detected only once (after a power cycle).
Tested with EXP Computer CD-865 with MC-1285B EPP cable and
TransDisk 3000.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Some parallel adapters (e.g. EXP Computer MC-1285B EPP Cable) return
bogus values when there's no master device present. This can cause
reset to fail, preventing the lone slave device (such as EXP Computer
CD-865) from working.
Add custom version of wait_after_reset that ignores master failure when
a slave device is present. The custom version is also needed because
the generic ata_sff_wait_after_reset uses direct port I/O for slave
device detection.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Add missing ops->sff_set_devctl implementation.
Fixes: 246a1c4c6b7f ("ata: pata_parport: add driver (PARIDE replacement)")
Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
There's a 'x' missing in 0x55 in pata_parport_devchk(), causing the
detection to always fail. Fix it.
Fixes: 246a1c4c6b7f ("ata: pata_parport: add driver (PARIDE replacement)")
Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
SI hardware does not have doorbells at all, however currently the code
will try to do the allocation and thus fail, makes SI AMDGPU not usable.
Fix this failure by skipping doorbells allocation when doorbells count
is zero.
Fixes: 54c30d2a8def ("drm/amdgpu: create kernel doorbell pages")
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
bo->tbo.resource can easily be NULL here.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2902
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
|
|
[Why]
eDPs fail to light up with seamless boot enabled
[How]
When seamless boot is enabled don't configure dpms_off
in disable_vbios_mode_if_required.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Surfaces can be backed (i.e. stored in) memory objects (mob's) which
are created and managed by the userspace as GEM buffers. Surfaces
grab only a ttm reference which means that the gem object can
be deleted underneath us, especially in cases where prime buffer
export is used.
Make sure that all userspace surfaces which are backed by gem objects
hold a gem reference to make sure they're not deleted before vmw
surfaces are done with them, which fixes:
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 2 PID: 2632 at lib/refcount.c:28 refcount_warn_saturate+0xfb/0x150
Modules linked in: overlay vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vsock snd_ens1371 snd_ac97_codec ac97_bus snd_pcm gameport>
CPU: 2 PID: 2632 Comm: vmw_ref_count Not tainted 6.5.0-rc2-vmwgfx #1
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
RIP: 0010:refcount_warn_saturate+0xfb/0x150
Code: eb 9e 0f b6 1d 8b 5b a6 01 80 fb 01 0f 87 ba e4 80 00 83 e3 01 75 89 48 c7 c7 c0 3c f9 a3 c6 05 6f 5b a6 01 01 e8 15 81 98 ff <0f> 0b e9 6f ff ff ff 0f b>
RSP: 0018:ffffbdc34344bba0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000027
RDX: ffff960475ea1548 RSI: 0000000000000001 RDI: ffff960475ea1540
RBP: ffffbdc34344bba8 R08: 0000000000000003 R09: 65646e75203a745f
R10: ffffffffa5b32b20 R11: 72657466612d6573 R12: ffff96037d6a6400
R13: ffff9603484805b0 R14: 000000000000000b R15: ffff9603bed06060
FS: 00007f5fd8520c40(0000) GS:ffff960475e80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5fda755000 CR3: 000000010d012005 CR4: 00000000003706e0
Call Trace:
<TASK>
? show_regs+0x6e/0x80
? refcount_warn_saturate+0xfb/0x150
? __warn+0x91/0x150
? refcount_warn_saturate+0xfb/0x150
? report_bug+0x19d/0x1b0
? handle_bug+0x46/0x80
? exc_invalid_op+0x1d/0x80
? asm_exc_invalid_op+0x1f/0x30
? refcount_warn_saturate+0xfb/0x150
drm_gem_object_handle_put_unlocked+0xba/0x110 [drm]
drm_gem_object_release_handle+0x6e/0x80 [drm]
drm_gem_handle_delete+0x6a/0xc0 [drm]
? __pfx_vmw_bo_unref_ioctl+0x10/0x10 [vmwgfx]
vmw_bo_unref_ioctl+0x33/0x40 [vmwgfx]
drm_ioctl_kernel+0xbc/0x160 [drm]
drm_ioctl+0x2d2/0x580 [drm]
? __pfx_vmw_bo_unref_ioctl+0x10/0x10 [vmwgfx]
? do_vmi_munmap+0xee/0x180
vmw_generic_ioctl+0xbd/0x180 [vmwgfx]
vmw_unlocked_ioctl+0x19/0x20 [vmwgfx]
__x64_sys_ioctl+0x99/0xd0
do_syscall_64+0x5d/0x90
? syscall_exit_to_user_mode+0x2a/0x50
? do_syscall_64+0x6d/0x90
? handle_mm_fault+0x16e/0x2f0
? exit_to_user_mode_prepare+0x34/0x170
? irqentry_exit_to_user_mode+0xd/0x20
? irqentry_exit+0x3f/0x50
? exc_page_fault+0x8e/0x190
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
RIP: 0033:0x7f5fda51aaff
Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 7>
RSP: 002b:00007ffd536a4d30 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffd536a4de0 RCX: 00007f5fda51aaff
RDX: 00007ffd536a4de0 RSI: 0000000040086442 RDI: 0000000000000003
RBP: 0000000040086442 R08: 000055fa603ada50 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000246 R12: 00007ffd536a51b8
R13: 0000000000000003 R14: 000055fa5ebb4c80 R15: 00007f5fda90f040
</TASK>
---[ end trace 0000000000000000 ]---
A lot of the analyis on the bug was done by Murray McAllister and
Ian Forbes.
Reported-by: Murray McAllister <murray.mcallister@gmail.com>
Cc: Ian Forbes <iforbes@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: a950b989ea29 ("drm/vmwgfx: Do not drop the reference to the handle too soon")
Cc: <stable@vger.kernel.org> # v6.2+
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230928041355.737635-1-zack@kde.org
|
|
Since size of 'header' pointer and '*header' structure is equal on 64-bit
machines issue probably didn't cause any wrong behavior. But anyway,
fixing typo is required.
Fixes: 7a73ba7469cb ("drm/vmwgfx: Use TTM handles instead of SIDs as user-space surface handles.")
Co-developed-by: Ivanov Mikhail <ivanov.mikhail1@huawei-partners.com>
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230905100203.1716731-1-konstantin.meskhidze@huawei.com
|
|
In unprivileged Xen guests event handling can cause a deadlock with
Xen console handling. The evtchn_rwlock and the hvc_lock are taken in
opposite sequence in __hvc_poll() and in Xen console IRQ handling.
Normally this is no problem, as the evtchn_rwlock is taken as a reader
in both paths, but as soon as an event channel is being closed, the
lock will be taken as a writer, which will cause read_lock() to block:
CPU0 CPU1 CPU2
(IRQ handling) (__hvc_poll()) (closing event channel)
read_lock(evtchn_rwlock)
spin_lock(hvc_lock)
write_lock(evtchn_rwlock)
[blocks]
spin_lock(hvc_lock)
[blocks]
read_lock(evtchn_rwlock)
[blocks due to writer waiting,
and not in_interrupt()]
This issue can be avoided by replacing evtchn_rwlock with RCU in
xen_free_irq(). Note that RCU is used only to delay freeing of the
irq_info memory. There is no RCU based dereferencing or replacement of
pointers involved.
In order to avoid potential races between removing the irq_info
reference and handling of interrupts, set the irq_info pointer to NULL
only when freeing its memory. The IRQ itself must be freed at that
time, too, as otherwise the same IRQ number could be allocated again
before handling of the old instance would have been finished.
This is XSA-441 / CVE-2023-34324.
Fixes: 54c9de89895e ("xen/events: add a new "late EOI" evtchn framework")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
When one of the LAG interfaces is in switchdev mode, setting default rule
can't be done.
The interface on which switchdev is running has ice_set_rx_mode() blocked
to avoid default rule adding (and other rules). The other interfaces
(without switchdev running but connected via bond with interface that
runs switchdev) can't follow the same scheme, because rx filtering needs
to be disabled when failover happens. Notification for bridge to set
promisc mode seems like good place to do that.
Fixes: bb52f42acef6 ("ice: Add driver support for firmware changes for LAG")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Do not set netback interfaces (vifs) default TX queue size to the ring size.
The TX queue size is not related to the ring size, and using the ring size (32)
as the queue size can lead to packet drops. Note the TX side of the vif
interface in the netback domain is the one receiving packets to be injected
to the guest.
Do not explicitly set the TX queue length to any value when creating the
interface, and instead use the system default. Note that the queue length can
also be adjusted at runtime.
Fixes: f942dc2552b8 ('xen network backend driver')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
