| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"The most noteworthy change in here is the addition of Ilpo Järvinen as
co-maintainer of platform-drivers-x86. Ilpo will be helping me with
platform-drivers-x86 maintenance going forward and you can expect
pull-requests from Ilpo in the future.
Other then that there is a set of Intel SCU IPC fixes and a
thinkpad_acpi locking fix"
* tag 'platform-drivers-x86-v6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
MAINTAINERS: Add x86 platform drivers patchwork
MAINTAINERS: Add myself into x86 platform driver maintainers
platform/x86: thinkpad_acpi: Take mutex in hotkey_resume
platform/x86: intel_scu_ipc: Fail IPC send if still busy
platform/x86: intel_scu_ipc: Don't override scu in intel_scu_ipc_dev_simple_command()
platform/x86: intel_scu_ipc: Check status upon timeout in ipc_wait_for_interrupt()
platform/x86: intel_scu_ipc: Check status after timeout in busy_loop()
|
|
When regcache_rbtree_write() creates a new rbtree_node it was passing the
wrong bit number to regcache_rbtree_set_register(). The bit number is the
offset __in number of registers__, but in the case of creating a new block
regcache_rbtree_write() was not dividing by the address stride to get the
number of registers.
Fix this by dividing by map->reg_stride.
Compare with regcache_rbtree_read() where the bit is checked.
This bug meant that the wrong register was marked as present. The register
that was written to the cache could not be read from the cache because it
was not marked as cached. But a nearby register could be marked as having
a cached value even if it was never written to the cache.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 3f4ff561bc88 ("regmap: rbtree: Make cache_present bitmap per node")
Link: https://lore.kernel.org/r/20230922153711.28103-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A pm_runtime_disable was left in when the driver was ported to use
devm_pm_runtime_enable, remove it.
Fixes: ef75e767167a ("spi: cs42l43: Add SPI controller support")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230922090829.1467594-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When running an SVA case, the following soft lockup is triggered:
--------------------------------------------------------------------
watchdog: BUG: soft lockup - CPU#244 stuck for 26s!
pstate: 83400009 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : arm_smmu_cmdq_issue_cmdlist+0x178/0xa50
lr : arm_smmu_cmdq_issue_cmdlist+0x150/0xa50
sp : ffff8000d83ef290
x29: ffff8000d83ef290 x28: 000000003b9aca00 x27: 0000000000000000
x26: ffff8000d83ef3c0 x25: da86c0812194a0e8 x24: 0000000000000000
x23: 0000000000000040 x22: ffff8000d83ef340 x21: ffff0000c63980c0
x20: 0000000000000001 x19: ffff0000c6398080 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: ffff3000b4a3bbb0
x14: ffff3000b4a30888 x13: ffff3000b4a3cf60 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc08120e4d6bc
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000048cfa
x5 : 0000000000000000 x4 : 0000000000000001 x3 : 000000000000000a
x2 : 0000000080000000 x1 : 0000000000000000 x0 : 0000000000000001
Call trace:
arm_smmu_cmdq_issue_cmdlist+0x178/0xa50
__arm_smmu_tlb_inv_range+0x118/0x254
arm_smmu_tlb_inv_range_asid+0x6c/0x130
arm_smmu_mm_invalidate_range+0xa0/0xa4
__mmu_notifier_invalidate_range_end+0x88/0x120
unmap_vmas+0x194/0x1e0
unmap_region+0xb4/0x144
do_mas_align_munmap+0x290/0x490
do_mas_munmap+0xbc/0x124
__vm_munmap+0xa8/0x19c
__arm64_sys_munmap+0x28/0x50
invoke_syscall+0x78/0x11c
el0_svc_common.constprop.0+0x58/0x1c0
do_el0_svc+0x34/0x60
el0_svc+0x2c/0xd4
el0t_64_sync_handler+0x114/0x140
el0t_64_sync+0x1a4/0x1a8
--------------------------------------------------------------------
Note that since 6.6-rc1 the arm_smmu_mm_invalidate_range above is renamed
to "arm_smmu_mm_arch_invalidate_secondary_tlbs", yet the problem remains.
The commit 06ff87bae8d3 ("arm64: mm: remove unused functions and variable
protoypes") fixed a similar lockup on the CPU MMU side. Yet, it can occur
to SMMU too, since arm_smmu_mm_arch_invalidate_secondary_tlbs() is called
typically next to MMU tlb flush function, e.g.
tlb_flush_mmu_tlbonly {
tlb_flush {
__flush_tlb_range {
// check MAX_TLBI_OPS
}
}
mmu_notifier_arch_invalidate_secondary_tlbs {
arm_smmu_mm_arch_invalidate_secondary_tlbs {
// does not check MAX_TLBI_OPS
}
}
}
Clone a CMDQ_MAX_TLBI_OPS from the MAX_TLBI_OPS in tlbflush.h, since in an
SVA case SMMU uses the CPU page table, so it makes sense to align with the
tlbflush code. Then, replace per-page TLBI commands with a single per-asid
TLBI command, if the request size hits this threshold.
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20230920052257.8615-1-nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The error paths for xiic_reinit() return negative values on failure
and 0 on success - this error message therefore is triggered on
_success_ rather than failure. Correct the condition so it's only
shown on failure as intended.
Fixes: 8fa9c9388053 ("i2c: xiic: return value of xiic_reinit")
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
gpio_sim_make_line_names() returns NULL or ERR_PTR() so we must not use
__free(kfree) on the returned address. Split this function into two, one
that determines the size of the "gpio-line-names" array to allocate and
one that actually sets the names at correct offsets. The allocation and
assignment of the managed pointer happens in between.
Fixes: 3faf89f27aab ("gpio: sim: simplify code with cleanup helpers")
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Closes: https://lore.kernel.org/all/07c32bf1-6c1a-49d9-b97d-f0ae4a2b42ab@p183/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
On MT76x0, LNA gain should be applied for both external and internal LNA.
On MT76x2, LNA gain should be treated as 0 for external LNA.
Move the LNA type based logic to mt76x2 in order to fix mt76x0.
Fixes: 2daa67588f34 ("mt76x0: unify lna_gain parsing")
Reported-by: Shiji Yang <yangshiji66@outlook.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230919194747.31647-1-nbd@nbd.name
|
|
in uhdlc_close()
Process the result of hdlc_open() and call uhdlc_close()
in case of an error. It is necessary to pass the error
code up the control flow, similar to a possible
error in request_irq().
Also add a hdlc_close() call to the uhdlc_close()
because the comment to hdlc_close() says it must be called
by the hardware driver when the HDLC device is being closed
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.6-2023-09-20:
amdgpu:
- MST fix
- Vbios part number reporting fix
- Fix a possible memory leak in an error case in the RAS code
- Fix low resolution modes on eDP
amdkfd:
- Fix GPU address for user queue wptr when GART is not at 0
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920222915.7789-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Prevent error pointer dereference (Dan Carpenter)
- Fix PMU busyness values when using GuC mode (Umesh)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZQxf267jxc7tiIlZ@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* DRM MM-test fixes
* Fbdev Kconfig fixes
* ivpu:
* IRQ-handling fixes
* meson:
* Fix memory leak in HDMI EDID code
* nouveau:
* Correct type casting
* Fix memory leak in scheduler
* u_memcpya() fixes
* virtio:
* Fence cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921153712.GA14059@linux-uq9g
|
|
Some old drives (e.g. an Ultra320 SCSI disk as reported by John) do not
seem to execute MAINTENANCE_IN / MI_REPORT_SUPPORTED_OPERATION_CODES
commands correctly and hang when a non-zero service action is specified
(one command format with service action case in scsi_report_opcode()).
Currently, CDL probing with scsi_cdl_check_cmd() is the only caller using a
non zero service action for scsi_report_opcode(). To avoid issues with
these old drives, do not attempt CDL probe if the device reports support
for an SPC version lower than 5 (CDL was introduced in SPC-5). To keep
things working with ATA devices which probe for the CDL T2A and T2B pages
introduced with SPC-6, modify ata_scsiop_inq_std() to claim SPC-6 version
compatibility for ATA drives supporting CDL.
SPC-6 standard version number is defined as Dh (= 13) in SPC-6 r09. Fix
scsi_probe_lun() to correctly capture this value by changing the bit mask
for the second byte of the INQUIRY response from 0x7 to 0xf.
include/scsi/scsi.h is modified to add the definition SCSI_SPC_6 with the
value 14 (Dh + 1). The missing definitions for the SCSI_SPC_4 and
SCSI_SPC_5 versions are also added.
Reported-by: John David Anglin <dave.anglin@bell.net>
Fixes: 624885209f31 ("scsi: core: Detect support for command duration limits")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230915022034.678121-1-dlemoal@kernel.org
Tested-by: David Gow <david@davidgow.net>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and bpf.
Current release - regressions:
- bpf: adjust size_index according to the value of KMALLOC_MIN_SIZE
- netfilter: fix entries val in rule reset audit log
- eth: stmmac: fix incorrect rxq|txq_stats reference
Previous releases - regressions:
- ipv4: fix null-deref in ipv4_link_failure
- netfilter:
- fix several GC related issues
- fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
- eth: team: fix null-ptr-deref when team device type is changed
- eth: i40e: fix VF VLAN offloading when port VLAN is configured
- eth: ionic: fix 16bit math issue when PAGE_SIZE >= 64KB
Previous releases - always broken:
- core: fix ETH_P_1588 flow dissector
- mptcp: fix several connection hang-up conditions
- bpf:
- avoid deadlock when using queue and stack maps from NMI
- add override check to kprobe multi link attach
- hsr: properly parse HSRv1 supervisor frames.
- eth: igc: fix infinite initialization loop with early XDP redirect
- eth: octeon_ep: fix tx dma unmap len values in SG
- eth: hns3: fix GRE checksum offload issue"
* tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
sfc: handle error pointers returned by rhashtable_lookup_get_insert_fast()
igc: Expose tx-usecs coalesce setting to user
octeontx2-pf: Do xdp_do_flush() after redirects.
bnxt_en: Flush XDP for bnxt_poll_nitroa0()'s NAPI
net: ena: Flush XDP packets on error.
net/handshake: Fix memory leak in __sock_create() and sock_alloc_file()
net: hinic: Fix warning-hinic_set_vlan_fliter() warn: variable dereferenced before check 'hwdev'
netfilter: ipset: Fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
netfilter: nf_tables: fix memleak when more than 255 elements expired
netfilter: nf_tables: disable toggling dormant table state more than once
vxlan: Add missing entries to vxlan_get_size()
net: rds: Fix possible NULL-pointer dereference
team: fix null-ptr-deref when team device type is changed
net: bridge: use DEV_STATS_INC()
net: hns3: add 5ms delay before clear firmware reset irq source
net: hns3: fix fail to delete tc flower rules during reset issue
net: hns3: only enable unicast promisc when mac table full
net: hns3: fix GRE checksum offload issue
net: hns3: add cmdq check for vf periodic service task
net: stmmac: fix incorrect rxq|txq_stats reference
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- remove some unused functions in the Xen event channel handling
- fix a regression (introduced during the merge window) when booting as
Xen PV guest
- small cleanup removing another strncpy() instance
* tag 'for-linus-6.6a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/efi: refactor deprecated strncpy
x86/xen: allow nesting of same lazy mode
x86/xen: move paravirt lazy code
arm/xen: remove lazy mode related definitions
xen: simplify evtchn_do_upcall() call maze
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A large collection of fixes around this time.
All small and mostly trivial fixes.
- Lots of fixes for the new -Wformat-truncation warnings
- A fix in ALSA rawmidi core regression and UMP handling
- Series of Cirrus codec fixes
- ASoC Intel and Realtek codec fixes
- Usual HD- and USB-audio quirks and AMD ASoC quirks"
* tag 'sound-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (64 commits)
ALSA: hda/realtek - ALC287 Realtek I2S speaker platform support
ALSA: hda: cs35l56: Use the new RUNTIME_PM_OPS() macro
ALSA: usb-audio: scarlett_gen2: Fix another -Wformat-truncation warning
ALSA: rawmidi: Fix NULL dereference at proc read
ASoC: SOF: core: Only call sof_ops_free() on remove if the probe was successful
ASoC: SOF: Intel: MTL: Reduce the DSP init timeout
ASoC: cs42l43: Add shared IRQ flag for shutters
ASoC: imx-audmix: Fix return error with devm_clk_get()
ASoC: hdaudio.c: Add missing check for devm_kstrdup
ALSA: riptide: Fix -Wformat-truncation warning for longname string
ALSA: cs4231: Fix -Wformat-truncation warning for longname string
ALSA: ad1848: Fix -Wformat-truncation warning for longname string
ALSA: hda: generic: Check potential mixer name string truncation
ALSA: cmipci: Fix -Wformat-truncation warning
ALSA: firewire: Fix -Wformat-truncation warning for MIDI stream names
ALSA: firewire: Fix -Wformat-truncation warning for longname string
ALSA: xen: Fix -Wformat-truncation warning
ALSA: opti9x: Fix -Wformat-truncation warning
ALSA: es1688: Fix -Wformat-truncation warning
ALSA: cs4236: Fix -Wformat-truncation warning
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"One patch to drop a non-existent alarm attribute in the nct6775 driver"
* tag 'hwmon-for-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (nct6775) Fix non-existent ALARM warning
|
|
rc_qp_count and ud_qp_count is not decremented during qp destroy.
Fix this.
Fixes: cb95709e0dca ("bnxt_re: Update the hw counters for resource stats")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1695199280-13520-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Flag that indicate control path command completion should be cleared
only after copying the command response data. As soon as the is_in_used
flag is clear, the waiting thread can proceed with wrong response
data. This wrong data is causing multiple issues like wrong lkey
used in data traffic and wrong AH Id etc.
Use a memory barrier to ensure that the response data
is copied and visible to the process waiting on a different
cpu core before clearing the is_in_used flag.
Clear the is_in_used after copying the command response.
Fixes: bcfee4ce3e01 ("RDMA/bnxt_re: remove redundant cmdq_bitmap")
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1695199280-13520-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In i2c_mux_gpio_probe_fw(), we should add fwnode_handle_put()
when break out of the iteration device_for_each_child_node()
as it will automatically increase and decrease the refcounter.
Fixes: 98b2b712bc85 ("i2c: i2c-mux-gpio: Enable this driver in ACPI land")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Several places in TC offload code assumed that the return from
rhashtable_lookup_get_insert_fast() was always either NULL or a valid
pointer to an existing entry, but in fact that function can return an
error pointer. In that case, perform the usual cleanup of the newly
created entry, then pass up the error, rather than attempting to take a
reference on the old entry.
Fixes: d902e1a737d4 ("sfc: bare bones TC offload on EF100")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230919183949.59392-1-edward.cree@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix linker error if FB=m about missing fb_io_read and fb_io_write. The
linker's error message suggests that this config setting has already
been broken for other symbols.
All errors (new ones prefixed by >>):
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_probe':
sh7760fb.c:(.text+0x374): undefined reference to `framebuffer_alloc'
sh4-linux-ld: sh7760fb.c:(.text+0x394): undefined reference to `fb_videomode_to_var'
sh4-linux-ld: sh7760fb.c:(.text+0x39c): undefined reference to `fb_alloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x3a4): undefined reference to `register_framebuffer'
sh4-linux-ld: sh7760fb.c:(.text+0x3ac): undefined reference to `fb_dealloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x434): undefined reference to `framebuffer_release'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_remove':
sh7760fb.c:(.text+0x800): undefined reference to `unregister_framebuffer'
sh4-linux-ld: sh7760fb.c:(.text+0x804): undefined reference to `fb_dealloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x814): undefined reference to `framebuffer_release'
>> sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0xc): undefined reference to `fb_io_read'
>> sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x10): undefined reference to `fb_io_write'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x2c): undefined reference to `cfb_fillrect'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x30): undefined reference to `cfb_copyarea'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x34): undefined reference to `cfb_imageblit'
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309130632.LS04CPWu-lkp@intel.com/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918090400.13264-1-tzimmermann@suse.de
|
|
When users attempt to obtain the coalesce setting using the
ethtool command, current code always returns 0 for tx-usecs.
This is because I225/6 always uses a queue pair setting, hence
tx_coalesce_usecs does not return a value during the
igc_ethtool_get_coalesce() callback process. The pair queue
condition checking in igc_ethtool_get_coalesce() is removed by
this patch so that the user gets information of the value of tx-usecs.
Even if i225/6 is using queue pair setting, there is no harm in
notifying the user of the tx-usecs. The implementation of the current
code may have previously been a copy of the legacy code i210.
Since I225 has the queue pair setting enabled, tx-usecs will always adhere
to the user-set rx-usecs value. An error message will appear when the user
attempts to set the tx-usecs value for the input parameters because,
by default, they should only set the rx-usecs value.
This patch also adds the helper function to get the
previous rx coalesce value similar to tx coalesce.
How to test:
User can get the coalesce value using ethtool command.
Example command:
Get: ethtool -c <interface>
Previous output:
rx-usecs: 3
rx-frames: n/a
rx-usecs-irq: n/a
rx-frames-irq: n/a
tx-usecs: 0
tx-frames: n/a
tx-usecs-irq: n/a
tx-frames-irq: n/a
New output:
rx-usecs: 3
rx-frames: n/a
rx-usecs-irq: n/a
rx-frames-irq: n/a
tx-usecs: 3
tx-frames: n/a
tx-usecs-irq: n/a
tx-frames-irq: n/a
Fixes: 8c5ad0dae93c ("igc: Add ethtool support")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230919170331.1581031-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
xdp_do_flush() should be invoked before leaving the NAPI poll function
if XDP-redirect has been performed.
Invoke xdp_do_flush() before leaving NAPI.
Cc: Geetha sowjanya <gakula@marvell.com>
Cc: Subbaraya Sundeep <sbhatta@marvell.com>
Cc: Sunil Goutham <sgoutham@marvell.com>
Cc: hariprasad <hkelam@marvell.com>
Fixes: 06059a1a9a4a5 ("octeontx2-pf: Add XDP support to netdev PF")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
bnxt_poll_nitroa0() invokes bnxt_rx_pkt() which can run a XDP program
which in turn can return XDP_REDIRECT. bnxt_rx_pkt() is also used by
__bnxt_poll_work() which flushes (xdp_do_flush()) the packets after each
round. bnxt_poll_nitroa0() lacks this feature.
xdp_do_flush() should be invoked before leaving the NAPI callback.
Invoke xdp_do_flush() after a redirect in bnxt_poll_nitroa0() NAPI.
Cc: Michael Chan <michael.chan@broadcom.com>
Fixes: f18c2b77b2e4e ("bnxt_en: optimized XDP_REDIRECT support")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
xdp_do_flush() should be invoked before leaving the NAPI poll function
after a XDP-redirect. This is not the case if the driver leaves via
the error path (after having a redirect in one of its previous
iterations).
Invoke xdp_do_flush() also in the error path.
Cc: Arthur Kiyanovski <akiyano@amazon.com>
Cc: David Arinzon <darinzon@amazon.com>
Cc: Noam Dagan <ndagan@amazon.com>
Cc: Saeed Bishara <saeedb@amazon.com>
Cc: Shay Agroskin <shayagr@amazon.com>
Fixes: a318c70ad152b ("net: ena: introduce XDP redirect implementation")
Acked-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Directly use tbo's start address will miss the domain start offset. Need
to use gpu_offset instead.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
On eDP we can receive invalid modes from dm_update_crtc_state() for
entirely new streams for which drm_mode_set_crtcinfo() shouldn't be
called on. So, instead of calling drm_mode_set_crtcinfo() from within
create_stream_for_sink() we can instead call it from
amdgpu_dm_connector_mode_valid(). Since, we are guaranteed to only call
drm_mode_set_crtcinfo() for valid modes from that function (invalid
modes are rejected by that callback) and that is the only user
of create_validate_stream_for_sink() that we need to call
drm_mode_set_crtcinfo() for (as before commit cb841d27b876
("drm/amd/display: Always pass connector_state to stream validation"),
that is the only place where create_validate_stream_for_sink()'s
dm_state was NULL).
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2693
Fixes: cb841d27b876 ("drm/amd/display: Always pass connector_state to stream validation")
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch fixes a memory leak in the amdgpu_ras_feature_enable() function.
The leak occurs when the function sends a command to the firmware to enable
or disable a RAS feature for a GFX block. If the command fails, the kfree()
function is not called to free the info memory.
Fixes: 9f051d6ff13f ("drm/amdgpu: Free ras cmd input buffer properly")
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
devm_kstrdup() returns pointer to allocated string on success,
NULL on failure. So it is better to check the return value of it.
Fixes: e35478eac030 ("i2c: mux: demux-pinctrl: run properly with multiple instances")
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
This reverts commit 7748ce5b69581325cae40c2134088820f0957902.
vbios_version sysfs node is used to identify Part Number also. Revert to
the same so that it doesn't break scripts/software which parse this.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[What]
MST now recognizes both connected displays
Fixes: 927e784c180c ("drm/amd/display: Add symclk enable/disable during stream enable/disable")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The removed line prevents the following cleanup function
to execute a dma_fence_put on the out_fence to free its
memory, producing the following output in kmemleak:
unreferenced object 0xffff888126d8ee00 (size 128):
comm "kwin_wayland", pid 981, jiffies 4295380296 (age 390.060s)
hex dump (first 32 bytes):
c8 a1 c2 27 81 88 ff ff e0 14 a9 c0 ff ff ff ff ...'............
30 1a e1 2e a6 00 00 00 28 fc 5b 17 81 88 ff ff 0.......(.[.....
backtrace:
[<0000000011655661>] kmalloc_trace+0x26/0xa0
[<0000000055f15b82>] virtio_gpu_fence_alloc+0x47/0xc0 [virtio_gpu]
[<00000000fa6d96f9>] virtio_gpu_execbuffer_ioctl+0x1a8/0x800 [virtio_gpu]
[<00000000e6cb5105>] drm_ioctl_kernel+0x169/0x240 [drm]
[<000000005ad33e27>] drm_ioctl+0x399/0x6b0 [drm]
[<00000000a19dbf65>] __x64_sys_ioctl+0xc5/0x100
[<0000000011fa801e>] do_syscall_64+0x5b/0xc0
[<0000000065c76d8a>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
unreferenced object 0xffff888121930500 (size 128):
comm "kwin_wayland", pid 981, jiffies 4295380313 (age 390.096s)
hex dump (first 32 bytes):
c8 a1 c2 27 81 88 ff ff e0 14 a9 c0 ff ff ff ff ...'............
f9 ec d7 2f a6 00 00 00 28 fc 5b 17 81 88 ff ff .../....(.[.....
backtrace:
[<0000000011655661>] kmalloc_trace+0x26/0xa0
[<0000000055f15b82>] virtio_gpu_fence_alloc+0x47/0xc0 [virtio_gpu]
[<00000000fa6d96f9>] virtio_gpu_execbuffer_ioctl+0x1a8/0x800 [virtio_gpu]
[<00000000e6cb5105>] drm_ioctl_kernel+0x169/0x240 [drm]
[<000000005ad33e27>] drm_ioctl+0x399/0x6b0 [drm]
[<00000000a19dbf65>] __x64_sys_ioctl+0xc5/0x100
[<0000000011fa801e>] do_syscall_64+0x5b/0xc0
[<0000000065c76d8a>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[...]
This memleak will grow quickly, being possible to see the
following line in dmesg after few minutes of life in the
virtual machine:
[ 706.217388] kmemleak: 10731 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
The patch will remove the line to allow the cleanup
function do its job.
Signed-off-by: José Pekkarinen <jose.pekkarinen@foxhound.fi>
Fixes: e4812ab8e6b1 ("drm/virtio: Refactor and optimize job submission code path")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230912060824.5210-1-jose.pekkarinen@foxhound.fi
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- driver fixes due to incorrect fwnode_handle_put() call
- bt8xx: bttv_risc_packed(): remove field checks
- vb2: frame_vector.c: replace WARN_ONCE with a comment
- imx219: a couple typo fixes and perform a full mode set
unconditionally
- uvcvideo: Fix OOB read
- some dependency fixes
* tag 'media/v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: imx-mipi-csis: Remove an incorrect fwnode_handle_put() call
media: vb2: frame_vector.c: replace WARN_ONCE with a comment
media: uvcvideo: Fix OOB read
media: bt8xx: bttv_risc_packed(): remove field checks
media: i2c: rdacm21: Remove an incorrect fwnode_handle_put() call
media: i2c: imx219: Perform a full mode set unconditionally
media: i2c: imx219: Fix crop rectangle setting when changing format
media: i2c: imx219: Fix a typo referring to a wrong variable
media: i2c: max9286: Remove an incorrect fwnode_handle_put() call
media: ivsc: Depend on VIDEO_DEV
media: via: Use correct dependency for camera sensor drivers
media: v4l: Use correct dependency for camera sensor drivers
media: pci: ivsc: Select build dependencies
|
|
We should send hci reset command before bt turn off, which can reset bt
firmware status.
Signed-off-by: Rocky Liao <quic_rjliao@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Commit 4dba12881f88 ("dm zoned: support arbitrary number of devices")
made the pointers to additional zoned devices to be stored in a
dynamically allocated dmz->ddev array. However, this array is not freed.
Rename dmz_put_zoned_device to dmz_put_zoned_devices and fix it to
free the dmz->ddev array when cleaning up zoned device information.
Remove NULL assignment for all dmz->ddev elements and just free the
dmz->ddev array instead.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 4dba12881f88 ("dm zoned: support arbitrary number of devices")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Dan Carpenter reports that the Smatch static checker warning has found
that there is another refcount leak in the probe function. While
of_node_put() was added in one of the return paths, it should in
fact be added for ALL return paths that return an error and at driver
removal time.
Fixes: 54c03bfd094f ("power: supply: Fix refcount leak in rk817_charger_probe")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Closes: https://lore.kernel.org/linux-pm/dc0bb0f8-212d-4be7-be69-becd2a3f9a80@kili.mountain/
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20230920145644.57964-1-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes, plus a new device ID for Intel Granite
Rapids systems.
The fix for the i.MX driver is fairly urgent, it's fixing a data
corruption issue when bits per word isn't 8.
There's also one fix which was queued but not sent for v6.4 due to
being minor and arriving at the end of the release"
* tag 'spi-fix-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: imx: Take in account bits per word instead of assuming 8-bits
spi: intel-pci: Add support for Granite Rapids SPI serial flash
spi: stm32: add a delay before SPI disable
spi: nxp-fspi: reset the FLSHxCR1 registers
spi: zynqmp-gqspi: fix clock imbalance on probe failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One fix for the tps6287x driver which was incorrectly specifying the
field for voltage range selection leading to incorrect voltages being
set"
* tag 'regulator-fix-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Fix voltage range selection
|
|
engine->stats is a union of execlist and guc stat objects. When execlist
specific fields are initialized, the initial state of guc stats is
affected. This results in bad busyness values when using GuC mode. Move
the execlist initialization from common code to execlist specific code.
Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230912212247.1828681-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 4485bd519f5d6d620a29d0547ff3c982bdeeb468)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Move the check for "if (IS_ERR(obj))" in front of the call to
i915_gem_object_set_cache_coherency() which dereferences "obj".
Otherwise it will lead to a crash.
Fixes: 43aa755eae2c ("drm/i915/mtl: Update cache coherency setting for context structure")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/455b2279-2e08-4d00-9784-be56d8ee42e3@moroto.mountain
(cherry picked from commit c92ec50822fb84306d951520d81919328421acbd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The EDID returned by drm_bridge_get_edid() needs to be freed.
Fixes: 0af5e0b41110 ("drm/meson: encoder_hdmi: switch to bridge DRM_BRIDGE_ATTACH_NO_CONNECTOR")
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: stable@vger.kernel.org # v5.17+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230914131015.2472029-1-jani.nikula@intel.com
|
|
The buck and linear range LDO (VSRAM_*) regulators share one set of ops.
This set includes support for get/set mode. However this only makes
sense for buck regulators, not LDOs. The callbacks were not checking
whether the register offset and/or mask for mode setting was valid or
not. This ends up making the kernel report "normal" mode operation for
the LDOs.
Create a new set of ops without the get/set mode callbacks for the
linear range LDO regulators.
Fixes: f67ff1bd58f0 ("regulator: mt6358: Add support for MT6358 regulator")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230920085336.136238-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add <linux/irqchips/xtensa-mx.h> to provide the function prototype to
prevent a build warning:
drivers/irqchip/irq-xtensa-mx.c:166:12: warning: no previous prototype for 'xtensa_mx_init_legacy' [-Wmissing-prototypes]
166 | int __init xtensa_mx_init_legacy(struct device_node *interrupt_parent)
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Message-Id: <20230920052139.10570-10-rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Buttress spec requires that the interrupt status is cleared at
the source first (before clearing MTL_BUTTRESS_INTERRUPT_STAT),
that implies that we have to mask out the global interrupt while
handling buttress interrupts.
Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230822095238.3722815-1-stanislaw.gruszka@linux.intel.com
|
|
before check 'hwdev'
'hwdev' is checked too late and hwdev will not be NULL, so remove the check
Fixes: 2acf960e3be6 ("net: hinic: Add support for configuration of rx-vlan-filter by ethtool")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202309112354.pikZCmyk-lkp@intel.com/
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If an error occurs after a successful irq_domain_add_linear() call, it
should be undone by a corresponding irq_domain_remove(), as already done
in the remove function.
Fixes: c6ce2b6bffe5 ("gpio: add TB10x GPIO driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
There are some attributes added by vxlan_fill_info() which are not
accounted for in vxlan_get_size(). Add them.
I didn't find a way to trigger an actual problem from this miscalculation
since there is usually extra space in netlink size calculations like
if_nlmsg_size(); but maybe I just didn't search long enough.
Fixes: 3511494ce2f3 ("vxlan: Group Policy extension")
Fixes: e1e5314de08b ("vxlan: implement GPE")
Fixes: 0ace2ca89cbd ("vxlan: Use checksum partial with remote checksum offload")
Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The u_memcpya() function is supposed to return error pointers on
error. Returning NULL will lead to an Oops.
Fixes: e3885f712134 ("nouveau/u_memcpya: use vmemdup_user")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/10fd258b-466f-4c5b-9d48-fe61a3f21424@moroto.mountain
|
|
I think there are limit checks in place for most things but the
new uAPI wants to not have them.
Add a limit check and use the vmemdup_user helper instead.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230810185020.231135-1-airlied@gmail.com
|
|
Always stop and re-start the scheduler in order to let the scheduler
free up the timedout job in case it got signaled. In case of exec jobs
the job type specific callback will take care to signal all fences and
tear down the channel.
Fixes: b88baab82871 ("drm/nouveau: implement new VM_BIND uAPI")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230916162835.5719-1-dakr@redhat.com
|
