| Age | Commit message (Collapse) | Author |
|---|
|
systems
Extend systems of class VMOD0010 equipped with CoffeeLake COMEx module
with BIOS related attributes to represent various BIOS statuses.
These attributes "bios_active_image", "bios_auth_fail",
"bios_upgrade_fail", "bios_safe_mode" has been already added to modular
system. This all of them are already documented.
- "bios_active_image" - location of current active BIOS image (0: Top,
1: Bottom. The reported value should correspond to value expected by
OS in case of BIOS safe mode is 0. This bit is related to Intel
top-swap feature of DualBios on the same flash.
- "bios_auth_fail": BIOS upgrade is failed because provided BIOS image
is not signed correctly.
- "bios_upgrade_fail" BIOS upgrade is failed by some reason not related
to authentication. For example, due to physical SPI flash problem.
- "bios_safe_mod": - 0 : if BIOS is booted from a supposed active image;
1 : BIOS safe mechanism was enforced by hardware (CPLD).
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Link: https://lore.kernel.org/r/20211023094022.4193813-3-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
MQM97xx systems
Add support for new system types "MQM97xx", which is based on Mellanox
Quantum-2 ASIC. It provides up to 64x400GB/s (IB) full bidirectional
bandwidth per port using PAM-4 modulation. The system support 32 OSFP
cages that can provide 64x400GB/s per port (two ports/cage). The system
fits standard 1U racks.
System is equipped with seven fan drawers and with per fan drawer LED
on backport panel and uses two-bytes for exposing CPLD Part Number
versions.
System is recognized by "DMI_BOARD_NAME" match, when this field is set
to "VMOD0010".
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Link: https://lore.kernel.org/r/20211023094022.4193813-2-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This reverts commits 55845f46df03 and c50031f03dfe, since this still
causes a build failure when QCOM_SCM is a loadable module, or when
CONFIG_SMP is disabled:
ERROR: modpost: "cpu_logical_map" [drivers/firmware/qcom-scm.ko] undefined!
This be done better for 5.17, but it's too late now to rework
properly.
Fixes: c50031f03dfe ("firmware: qcom: scm: Don't break compile test on non-ARM platforms")
Fixes: 55845f46df03 ("firmware: qcom: scm: Add support for MC boot address API")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
An upcoming change to platform profiles will export `platform_profile_get`
as a symbol that can be used by other drivers. Avoid the collision.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20211026190835.10697-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
An upcoming change to platform profiles will export `platform_profile_get`
as a symbol that can be used by other drivers. Avoid the collision.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20211026190835.10697-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This is already checked when calling rtc_read_alarm.
Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20211026171443.289-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
For the majority of users this information will not be informative
as they've chosen to program the RTC before going to sleep.
Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20211026171443.289-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Just hardcode the RTC to "rtc0" which is the default for
CONFIG_RTC_SYSTOHC_DEVICE and used by all standard x86 distros.
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Fixes: 59348401ebed ("platform/x86: amd-pmc: Add special handling for timer based S0i3 wakeup")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20211026171443.289-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Now that we have a better method to select SFP interface modes, we
no longer need to use phylink_helper_basex_speed() in a driver's
validation function, and we can also get rid of our hack to indicate
both 1000base-X and 2500base-X if the comphy is present to make that
work. Remove this hack and use of phylink_helper_basex_speed().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As phylink checks the interface mode against the supported_interfaces
bitmap, we no longer need to validate the interface mode in the
validation function. Remove this to simplify it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Populate the phy_interface_t bitmap for the Marvell mvneta driver with
interfaces modes supported by the MAC.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adjusts the string spaces of some parameters of tx bd info in
debugfs according to their maximum needs.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The specified buffer length for three debugfs files fd_tcam, uc and tqp
is not enough for their maximum needs, so this patch fixes them.
Fixes: b5a0b70d77b9 ("net: hns3: refactor dump fd tcam of debugfs")
Fixes: 1556ea9120ff ("net: hns3: refactor dump mac list of debugfs")
Fixes: d96b0e59468d ("net: hns3: refactor dump reg of debugfs")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
in debugfs
As the width of packets number registers is 32 bits, they needs at most
10 characters for decimal data printing, but now the string spaces is not
enough, so this patch fixes it.
Fixes: e44c495d95e ("net: hns3: refactor queue info of debugfs")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The member data in struct hclge_desc is type of __le32, it needs endian
conversion before using it, and some functions of debugfs didn't do that,
so this patch fixes it.
Fixes: c0ebebb9ccc1 ("net: hns3: Add "dcb register" status information query function")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, if there is a reset event triggered by RAS during device in
initialization process, driver may run reset process concurrently with
initialization process. In this case, it may cause problem. For example,
the RSS indirection table may has not been alloc memory in initialization
process yet, but it is used in reset process, it will cause a call trace
like this:
[61228.744836] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
...
[61228.897677] Workqueue: hclgevf hclgevf_service_task [hclgevf]
[61228.911390] pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--)
[61228.918670] pc : hclgevf_set_rss_indir_table+0xb4/0x190 [hclgevf]
[61228.927812] lr : hclgevf_set_rss_indir_table+0x90/0x190 [hclgevf]
[61228.937248] sp : ffff8000162ebb50
[61228.941087] x29: ffff8000162ebb50 x28: ffffb77add72dbc0 x27: ffff0820c7dc8080
[61228.949516] x26: 0000000000000000 x25: ffff0820ad4fc880 x24: ffff0820c7dc8080
[61228.958220] x23: ffff0820c7dc8090 x22: 00000000ffffffff x21: 0000000000000040
[61228.966360] x20: ffffb77add72b9c0 x19: 0000000000000000 x18: 0000000000000030
[61228.974646] x17: 0000000000000000 x16: ffffb77ae713feb0 x15: ffff0820ad4fcce8
[61228.982808] x14: ffffffffffffffff x13: ffff8000962eb7f7 x12: 00003834ec70c960
[61228.991990] x11: 00e0fafa8c206982 x10: 9670facc78a8f9a8 x9 : ffffb77add717530
[61229.001123] x8 : ffff0820ad4fd6b8 x7 : 0000000000000000 x6 : 0000000000000011
[61229.010249] x5 : 00000000000cb1b0 x4 : 0000000000002adb x3 : 0000000000000049
[61229.018662] x2 : ffff8000162ebbb8 x1 : 0000000000000000 x0 : 0000000000000480
[61229.027002] Call trace:
[61229.030177] hclgevf_set_rss_indir_table+0xb4/0x190 [hclgevf]
[61229.039009] hclgevf_rss_init_hw+0x128/0x1b4 [hclgevf]
[61229.046809] hclgevf_reset_rebuild+0x17c/0x69c [hclgevf]
[61229.053862] hclgevf_reset_service_task+0x4cc/0xa80 [hclgevf]
[61229.061306] hclgevf_service_task+0x6c/0x630 [hclgevf]
[61229.068491] process_one_work+0x1dc/0x48c
[61229.074121] worker_thread+0x15c/0x464
[61229.078562] kthread+0x168/0x16c
[61229.082873] ret_from_fork+0x10/0x18
[61229.088221] Code: 7900e7f6 f904a683 d503201f 9101a3e2 (38616b43)
[61229.095357] ---[ end trace 153661a538f6768c ]---
To fix this problem, don't schedule reset task before initialization
process is done.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the workqueue of hclge/hclgevf is executed on
the CPU that initiates scheduling requests by default. In
stress scenarios, the CPU may be busy and workqueue scheduling
is completed after a long period of time. To avoid this
situation and implement proper scheduling, use the WQ_UNBOUND
mode instead. In this way, the workqueue can be performed on
a relatively idle CPU.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If a TP port is configured by follow steps:
1.ethtool -s ethx autoneg off speed 100 duplex full
2.ethtool -A ethx rx on tx on
3.ethtool -s ethx autoneg on(rx&tx negotiated pause results are off)
4.ethtool -s ethx autoneg off speed 100 duplex full
In step 3, driver will set rx&tx pause parameters of hardware to off as
pause parameters negotiated with link partner are off.
After step 4, the "ethtool -a ethx" command shows both rx and tx pause
parameters are on. However, pause parameters of hardware are still off
and port has no flow control function actually.
To fix this problem, if autoneg is disabled, driver uses its saved
parameters to restore pause of hardware. If the speed is not changed in
this case, there is no link state changed for phy, it will cause the pause
parameter is not taken effect, so we need to force phy to go down and up.
Fixes: aacbe27e82f0 ("net: hns3: modify how pause options is displayed")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I got memory leak as follows when doing fault injection test:
unreferenced object 0xffff888258228440 (size 64):
comm "kworker/7:2", pid 2005, jiffies 4294989509 (age 824.540s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8167939c>] slab_post_alloc_hook+0x9c/0x490
[<ffffffff8167f627>] kmem_cache_alloc_trace+0x1f7/0x470
[<ffffffffa02ac0e4>] keyspan_port_probe+0xa4/0x5d0 [keyspan]
[<ffffffffa0294c07>] usb_serial_device_probe+0x97/0x1d0 [usbserial]
[<ffffffff82b50ca7>] really_probe+0x167/0x460
[<ffffffff82b51099>] __driver_probe_device+0xf9/0x180
[<ffffffff82b51173>] driver_probe_device+0x53/0x130
[<ffffffff82b516f5>] __device_attach_driver+0x105/0x130
[<ffffffff82b4cfe9>] bus_for_each_drv+0x129/0x190
[<ffffffff82b50a69>] __device_attach+0x1c9/0x270
[<ffffffff82b518d0>] device_initial_probe+0x20/0x30
[<ffffffff82b4f062>] bus_probe_device+0x142/0x160
[<ffffffff82b4a4e9>] device_add+0x829/0x1300
[<ffffffffa0295fda>] usb_serial_probe.cold+0xc9b/0x14ac [usbserial]
[<ffffffffa02266aa>] usb_probe_interface+0x1aa/0x3c0 [usbcore]
[<ffffffff82b50ca7>] really_probe+0x167/0x460
If keyspan_port_probe() fails to allocate memory for an out_buffer[i] or
in_buffer[i], the previously allocated memory for out_buffer or
in_buffer needs to be freed on the error handling path, otherwise a
memory leak will result.
Fixes: bad41a5bf177 ("USB: keyspan: fix port DMA-buffer allocations")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20211015085543.1203011-1-wanghai38@huawei.com
Cc: stable@vger.kernel.org # 3.12
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The new wrapper functions for usb_control_msg() can accept data from
stack and treat short reads as errors. Hence use the wrappers functions.
Please note that because of this change, cp210x_read_reg_block() will no
longer log the length of short reads.
Signed-off-by: Himadri Pandya <himadrispandya@gmail.com>
Link: https://lore.kernel.org/r/20211001065720.21330-3-himadrispandya@gmail.com
[ johan: style changes ]
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
usb_control_msg_recv() is a new wrapper function for usb_control_msg()
that has error checks for short reads. This function also accepts data
buffer on stack. Hence use this function to simplify error handling for
short reads. Short reads will now get reported as -EREMOTEIO with no
indication of how short the transfer was.
Signed-off-by: Himadri Pandya <himadrispandya@gmail.com>
Link: https://lore.kernel.org/r/20211001065720.21330-2-himadrispandya@gmail.com
[ johan: fix quirk-detection breakage, style changes ]
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
There was nothing to protect multiple SPI controllers on the same FSI2SPI
device from being accessed through the FSI2SPI device at the same time.
For example, multiple writes to the command and data registers might occur
for different SPI controllers, resulting in complete chaos in the SPI
engine. To prevent this, add a FSI2SPI device level mutex and lock it in
the SPI register read and write functions.
Fixes: bbb6b2f9865b ("spi: Add FSI-attached SPI controller driver")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20211026193327.52420-1-eajames@linux.ibm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The intermediate value 1000000 * 10 * 9671 overflows 32 bits, so force
promotion to a bigger type.
From the logs:
[drm:intel_dp_compute_config [i915]] DP link rate required 3657063 available -580783288
v2: Use mul_u32_u32() (Ville)
Fixes: 48efd014f0ea ("drm/i915/dp: add max data rate calculation for UHBR rates")
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026093407.11381-1-jani.nikula@intel.com
(cherry picked from commit bf0d608b55d9b7f426031dfd9f08d9df36c94728)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Use __release_guc_id (lock held) rather than release_guc_id (acquires
lock), add lockdep annotations.
213.280129] i915: Running i915_perf_live_selftests/live_noa_gpr
[ 213.283459] ============================================
[ 213.283462] WARNING: possible recursive locking detected
{{[ 213.283466] 5.15.0-rc6+ #18 Tainted: G U W }}
[ 213.283470] --------------------------------------------
[ 213.283472] kworker/u24:0/8 is trying to acquire lock:
[ 213.283475] ffff8ffc4f6cc1e8 (&guc->submission_state.lock){....}-{2:2}, at: destroyed_worker_func+0x2df/0x350 [i915]
{{[ 213.283618] }}
{{ but task is already holding lock:}}
[ 213.283621] ffff8ffc4f6cc1e8 (&guc->submission_state.lock){....}-{2:2}, at: destroyed_worker_func+0x4f/0x350 [i915]
{{[ 213.283720] }}
{{ other info that might help us debug this:}}
[ 213.283724] Possible unsafe locking scenario:[ 213.283727] CPU0
[ 213.283728] ----
[ 213.283730] lock(&guc->submission_state.lock);
[ 213.283734] lock(&guc->submission_state.lock);
{{[ 213.283737] }}
{{ *** DEADLOCK ***}}[ 213.283740] May be due to missing lock nesting notation[ 213.283744] 3 locks held by kworker/u24:0/8:
[ 213.283747] #0: ffff8ffb80059d38 ((wq_completion)events_unbound){..}-{0:0}, at: process_one_work+0x1f3/0x550
[ 213.283757] #1: ffffb509000e3e78 ((work_completion)(&guc->submission_state.destroyed_worker)){..}-{0:0}, at: process_one_work+0x1f3/0x550
[ 213.283766] #2: ffff8ffc4f6cc1e8 (&guc->submission_state.lock){....}-{2:2}, at: destroyed_worker_func+0x4f/0x350 [i915]
{{[ 213.283860] }}
{{ stack backtrace:}}
[ 213.283863] CPU: 8 PID: 8 Comm: kworker/u24:0 Tainted: G U W 5.15.0-rc6+ #18
[ 213.283868] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021
[ 213.283873] Workqueue: events_unbound destroyed_worker_func [i915]
[ 213.283957] Call Trace:
[ 213.283960] dump_stack_lvl+0x57/0x72
[ 213.283966] __lock_acquire.cold+0x191/0x2d3
[ 213.283972] lock_acquire+0xb5/0x2b0
[ 213.283978] ? destroyed_worker_func+0x2df/0x350 [i915]
[ 213.284059] ? destroyed_worker_func+0x2d7/0x350 [i915]
[ 213.284139] ? lock_release+0xb9/0x280
[ 213.284143] _raw_spin_lock_irqsave+0x48/0x60
[ 213.284148] ? destroyed_worker_func+0x2df/0x350 [i915]
[ 213.284226] destroyed_worker_func+0x2df/0x350 [i915]
[ 213.284310] process_one_work+0x270/0x550
[ 213.284315] worker_thread+0x52/0x3b0
[ 213.284319] ? process_one_work+0x550/0x550
[ 213.284322] kthread+0x135/0x160
[ 213.284326] ? set_kthread_struct+0x40/0x40
[ 213.284331] ret_from_fork+0x1f/0x30
and a bit later in the trace:
{{ 227.499864] do_raw_spin_lock+0x94/0xa0}}
[ 227.499868] _raw_spin_lock_irqsave+0x50/0x60
[ 227.499871] ? guc_flush_destroyed_contexts+0x4f/0xf0 [i915]
[ 227.499995] guc_flush_destroyed_contexts+0x4f/0xf0 [i915]
[ 227.500104] intel_guc_submission_reset_prepare+0x99/0x4b0 [i915]
[ 227.500209] ? mark_held_locks+0x49/0x70
[ 227.500212] intel_uc_reset_prepare+0x46/0x50 [i915]
[ 227.500320] reset_prepare+0x78/0x90 [i915]
[ 227.500412] __intel_gt_set_wedged.part.0+0x13/0xe0 [i915]
[ 227.500485] intel_gt_set_wedged.part.0+0x54/0x100 [i915]
[ 227.500556] intel_gt_set_wedged_on_fini+0x1a/0x30 [i915]
[ 227.500622] intel_gt_driver_unregister+0x1e/0x60 [i915]
[ 227.500694] i915_driver_remove+0x4a/0xf0 [i915]
[ 227.500767] i915_pci_probe+0x84/0x170 [i915]
[ 227.500838] local_pci_probe+0x42/0x80
[ 227.500842] pci_device_probe+0xd9/0x190
[ 227.500844] really_probe+0x1f2/0x3f0
[ 227.500847] __driver_probe_device+0xfe/0x180
[ 227.500848] driver_probe_device+0x1e/0x90
[ 227.500850] __driver_attach+0xc4/0x1d0
[ 227.500851] ? __device_attach_driver+0xe0/0xe0
[ 227.500853] ? __device_attach_driver+0xe0/0xe0
[ 227.500854] bus_for_each_dev+0x64/0x90
[ 227.500856] bus_add_driver+0x12e/0x1f0
[ 227.500857] driver_register+0x8f/0xe0
[ 227.500859] i915_init+0x1d/0x8f [i915]
[ 227.500934] ? 0xffffffffc144a000
[ 227.500936] do_one_initcall+0x58/0x2d0
[ 227.500938] ? rcu_read_lock_sched_held+0x3f/0x80
[ 227.500940] ? kmem_cache_alloc_trace+0x238/0x2d0
[ 227.500944] do_init_module+0x5c/0x270
[ 227.500946] __do_sys_finit_module+0x95/0xe0
[ 227.500949] do_syscall_64+0x38/0x90
[ 227.500951] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 227.500953] RIP: 0033:0x7ffa59d2ae0d
[ 227.500954] Code: c8 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3b 80 0c 00 f7 d8 64 89 01 48
[ 227.500955] RSP: 002b:00007fff320bbf48 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 227.500956] RAX: ffffffffffffffda RBX: 00000000022ea710 RCX: 00007ffa59d2ae0d
[ 227.500957] RDX: 0000000000000000 RSI: 00000000022e1d90 RDI: 0000000000000004
[ 227.500958] RBP: 0000000000000020 R08: 00007ffa59df3a60 R09: 0000000000000070
[ 227.500958] R10: 00000000022e1d90 R11: 0000000000000246 R12: 00000000022e1d90
[ 227.500959] R13: 00000000022e58e0 R14: 0000000000000043 R15: 00000000022e42c0
v2:
(CI build)
- Fix build error
Fixes: 1a52faed31311 ("drm/i915/guc: Take GT PM ref when deregistering context")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020192147.8048-1-matthew.brost@intel.com
(cherry picked from commit 12a9917e9e84fef4efa73c09b32870df0b1ed795)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add the const that was accidentally left out from the vtables.
Fixes: 6b4cd9cba620 ("drm/i915: constify the cdclk vtable")
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211021133408.32166-1-jani.nikula@intel.com
(cherry picked from commit 877d074939a5f82b099da2db3bcccc6c418b9c39)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This reverts commit 05734ca2a8f76c9eb3890b3c9dfc3467f03105c1.
It's not graceful, instead it leads to boot time warning splats in the
case it is supposed to handle gracefully. Apparently the BIOS/GOP
enabling the port we end up skipping leads to state readout
problems. Back to the drawing board.
References: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_21255/bat-adlp-4/boot0.txt
Fixes: 05734ca2a8f7 ("drm/i915/bios: gracefully disable dual eDP for now")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019114334.24643-1-jani.nikula@intel.com
(cherry picked from commit 171c555c2c2664a250cd35680c34c31a6d233dc7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Atm until the DPCD for a connector is read the max link rate and lane
count params are invalid. If the connector is modeset, in
intel_dp_compute_config(), intel_dp_common_len_rate_limit(max_link_rate)
will return 0, leading to a intel_dp->common_rates[-1] access.
Fix the above by making sure the max link params are always valid.
The above access leads to an undefined behaviour by definition, though
not causing a user visible problem to my best knowledge, see the previous
patch why. Nevertheless it is an undefined behaviour and it triggers a
BUG() in CONFIG_UBSAN builds, hence CC:stable.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018094154.1407705-4-imre.deak@intel.com
(cherry picked from commit 9ad87de4735620ffc555592e8c5f580478fa3ed0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Atm, there are no sink rate values set for DP (vs. eDP) sinks until the
DPCD capabilities are successfully read from the sink. During this time
intel_dp->num_common_rates is 0 which can lead to a
intel_dp->common_rates[-1] (*)
access, which is an undefined behaviour, in the following cases:
- In intel_dp_sync_state(), if the encoder is enabled without a sink
connected to the encoder's connector (BIOS enabled a monitor, but the
user unplugged the monitor until the driver loaded).
- In intel_dp_sync_state() if the encoder is enabled with a sink
connected, but for some reason the DPCD read has failed.
- In intel_dp_compute_link_config() if modesetting a connector without
a sink connected on it.
- In intel_dp_compute_link_config() if modesetting a connector with a
a sink connected on it, but before probing the connector first.
To avoid the (*) access in all the above cases, make sure that the sink
rate table - and hence the common rate table - is always valid, by
setting a default minimum sink rate when registering the connector
before anything could use it.
I also considered setting all the DP link rates by default, so that
modesetting with higher resolution modes also succeeds in the last two
cases above. However in case a sink is not connected that would stop
working after the first modeset, due to the LT fallback logic. So this
would need more work, beyond the scope of this fix.
As I mentioned in the previous patch, I don't think the issue this patch
fixes is user visible, however it is an undefined behaviour by
definition and triggers a BUG() in CONFIG_UBSAN builds, hence CC:stable.
v2: Clear the default sink rates, before initializing these for eDP.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4297
References: https://gitlab.freedesktop.org/drm/intel/-/issues/4298
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018143417.1452632-1-imre.deak@intel.com
(cherry picked from commit 3f61ef9777c0ab0f03f4af0ed6fd3e5250537a8d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The wait_for_completion_timeout function returns 0 if timed out or a
positive value if completed. Hence, "less than zero" comparison always
misses timeouts and doesn't kill the URB as it should, leading to
re-sending it while it is active.
Fixes: 42337b9d4d95 ("HID: add driver for U2F Zero built-in LED and RNG")
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The previous commit fixed handling of incomplete packets but broke error
handling: offsetof returns an unsigned value (size_t), but when compared
against the signed return value, the return value is interpreted as if
it were unsigned, so negative return values are never less than the
offset.
To make the code easier to read, calculate the minimal packet length
once and separately, and assign it to a signed int variable to eliminate
unsigned math and the need for type casts. It then becomes immediately
obvious how the actual data length is calculated and why the return
value cannot be less than the minimal length.
Fixes: 22d65765f211 ("HID: u2fzero: ignore incomplete packets without data")
Fixes: 42337b9d4d95 ("HID: add driver for U2F Zero built-in LED and RNG")
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
NitroKey produced a clone of U2F Zero with a different firmware,
which moved extra commands into the vendor range.
Disambiguate hardware revisions and select the correct configuration in
u2fzero_probe.
Link: https://github.com/Nitrokey/nitrokey-fido-u2f-firmware/commit/a93c16b41f
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The helper function devm_add_action_or_reset() will internally
call devm_add_action(), and if devm_add_action() fails then it will
execute the action mentioned and return the error code. So
use devm_add_action_or_reset() instead of devm_add_action()
to simplify the error handling, reduce the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The size of the critical section in this function appears to be larger
than necessary. The `wacom_udev_list_lock` exists to ensure that one
interface cannot begin checking if a shared object exists while a second
interface is doing the same (otherwise both could determine that no
object exists yet and create their own independent objects rather than
sharing just one). It should be safe for the critical section to end
once a fresly-allocated shared object would be found by other threads
(i.e., once it has been added to `wacom_udev_list`, which is looped
over by `wacom_get_hdev_data`).
This commit is a necessary pre-requisite for a later change to swap the
use of `devm_add_action` with `devm_add_action_or_reset`, which would
otherwise deadlock in its error case.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
DART has an additional global register to control which streams are
isolated. This register is a bit redundant since DART_TCR can already
be used to control isolation and is usually initialized to DART_STREAM_ALL
by the time we get control. Some DARTs (namely the one used for the audio
controller) however have some streams disabled initially. Make sure those
work by initializing DART_STREAMS_ENABLE during reset.
Reported-by: Martin Povišer <povik@protonmail.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20211019162253.45919-1-sven@svenpeter.dev
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This patch adds a check for if the rumble queue ringbuffer is empty
prior to queuing the rumble workqueue. If the current rumble setting is
using a non-zero amplitude though, it will queue the worker anyway. This
is because the controller will automatically disable the rumble effect
if it isn't "refreshed".
This change improves bluetooth communication reliability with the
controller, since it reduces the amount of traffic.
Note that we still send a few periodic zero packets to avoid scenarios
where the controller fails to process the zero amplitude packet. Without
sending a few to be sure, the rumble could get stuck on until the
controller times out.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
It has been found that sending subcommands and rumble data packets at
too great a rate can result in controller disconnects. This patch limits
the rate of subcommands/rumble to once every 25 milliseconds.
Similar to sending subcommands, it is more reliable to send the rumble
data packets immediately after we've received an input report from the
controller. This results in far fewer bluetooth disconnects for the
controller.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This patch alters the method that the rumble data is sent to the
controller. Rather than using the enable rumble subcommand for this
purpose, the driver now employs the RUMBLE_ONLY output report. This has
the advantage of not needing to receive a subcommand reply (to the major
benefit of reducing IMU latency) and also seems to make the rumble
vibrations more continuous. Perhaps most importantly it reduces
disconnects during times of heavy rumble.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This patch adds support for the controller's IMU. The accelerometer and
gyro data are both provided to userspace using a second input device.
The devices can be associated using their uniq value (set to the
controller's MAC address).
A large part of this patch's functionality was provided by Carl Mueller.
The IMU device is blacklisted from the joydev input handler.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
If the controller's SPI flash contains user stick calibration(s), they
should be prioritized over the factory calibrations. The user
calibrations have 2 magic bytes preceding them. If the bytes are the
correct magic values, the user calibration is used.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This patch adds support for the joy-con charging grip. The peripheral
essentially behaves the same as a pro controller, but with two joy-cons
attached to the grip. However the grip exposes the two joy-cons as
separate hid devices, so extra handling is required. The joy-con is
queried to check if it is a right or left joy-con (since the product ID
is identical between left/right when using the grip).
Since controller model detection is now more complicated, the various
checks for hid product values have been replaced with helper macros to
reduce code duplication.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This patch sets the input device's uniq identifier to the controller's
MAC address. This is useful for future association between an IMU input
device with the normal input device as well as associating the
controller with any serial joy-con driver.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This patch fixes meaningless error output from trying to send
subcommands immediately after controller removal. It now disables
subcommands as soon as possible on removal.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This patch sets the most significant bit of the hid hw version to allow
userspace to distinguish between this driver's input mappings vs. the
default hid mappings. This prevents breaking userspace applications that
use SDL2 for gamepad input, allowing them to distinguish the mappings
based on the version.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Waiting to send subcommands until right after receiving an input report
drastically improves subcommand reliability. If the driver has finished
initial controller configuration, it now waits until receiving an input
report for all subcommands.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The controller occasionally doesn't respond to subcommands. It appears
that it's dropping them. To improve reliability, this patch attempts one
retry in the case of a synchronous send timeout. In testing, this has
resolved all timeout failures (most common for LED setting and rumble
setting subcommands).
The 1 second timeout is excessively long for rumble and LED subcommands,
so the timeout has been made a param for joycon_hid_send_sync. Most
subcommands continue to use the 1s timeout, since they can result in
long response times. Rumble and LED setting subcommands have been
reduced to 250ms, since response times for them are much quicker (and
this significantly reduces the observable impact in the case of a retry
being required).
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This patch adds support for controller rumble.
The ff_effect weak magnitude is associated with the pro controller's
right motor (or with a right joy-con). The strong magnitude is
associated with the pro's left motor (or a left joy-con).
The rumble data is sent periodically (currently configured for every 50
milliseconds). If the controller receives no rumble data for too long a
time period, it will stop vibrating. The data is also sent every time
joycon_set_rumble is called to avoid latency of up to 50ms.
Because the rumble subcommands are sent in a deferred workqueue (they
can't be sent in the play_effect function due to the hid send sleeping),
the effects are queued. This ensures that no rumble effect is missed due
to them arriving in too quick of succession.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This patch adds the ability to set the intensity level of the home
button's LED.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This patch adds power_supply functionality to the switch controller
driver for its battery.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This patch adds led_classdev functionality to the switch controller
driver. It adds support for the 4 player LEDs. The Home Button LED still
needs to be supported on the pro controllers and right joy-con.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The hid-nintendo driver supports the Nintendo Switch Pro Controllers and
the Joy-Cons. The Pro Controllers can be used over USB or Bluetooth.
The Joy-Cons each create their own, independent input devices, so it is
up to userspace to combine them if desired.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
