summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-11-15atlantic: Fix OOB read and write in hw_atl_utils_fw_rpc_waitZekun Shen
This bug report shows up when running our research tools. The reports is SOOB read, but it seems SOOB write is also possible a few lines below. In details, fw.len and sw.len are inputs coming from io. A len over the size of self->rpc triggers SOOB. The patch fixes the bugs by adding sanity checks. The bugs are triggerable with compromised/malfunctioning devices. They are potentially exploitable given they first leak up to 0xffff bytes and able to overwrite the region later. The patch is tested with QEMU emulater. This is NOT tested with a real device. Attached is the log we found by fuzzing. BUG: KASAN: slab-out-of-bounds in hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic] Read of size 4 at addr ffff888016260b08 by task modprobe/213 CPU: 0 PID: 213 Comm: modprobe Not tainted 5.6.0 #1 Call Trace: dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic] ? hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic] __kasan_report.cold+0x37/0x7c ? aq_hw_read_reg_bit+0x60/0x70 [atlantic] ? hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic] kasan_report+0xe/0x20 hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic] hw_atl_utils_fw_rpc_call+0x95/0x130 [atlantic] hw_atl_utils_fw_rpc_wait+0x176/0x210 [atlantic] hw_atl_utils_mpi_create+0x229/0x2e0 [atlantic] ? hw_atl_utils_fw_rpc_wait+0x210/0x210 [atlantic] ? hw_atl_utils_initfw+0x9f/0x1c8 [atlantic] hw_atl_utils_initfw+0x12a/0x1c8 [atlantic] aq_nic_ndev_register+0x88/0x650 [atlantic] ? aq_nic_ndev_init+0x235/0x3c0 [atlantic] aq_pci_probe+0x731/0x9b0 [atlantic] ? aq_pci_func_init+0xc0/0xc0 [atlantic] local_pci_probe+0xd3/0x160 pci_device_probe+0x23f/0x3e0 Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu> Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15net: bnx2x: fix variable dereferenced before checkPavel Skripkin
Smatch says: bnx2x_init_ops.h:640 bnx2x_ilt_client_mem_op() warn: variable dereferenced before check 'ilt' (see line 638) Move ilt_cli variable initialization _after_ ilt validation, because it's unsafe to deref the pointer before validation check. Fixes: 523224a3b3cd ("bnx2x, cnic, bnx2i: use new FW/HSI") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15regmap: allow to define reg_update_bits for no bus configurationAnsuel Smith
Some device requires a special handling for reg_update_bits and can't use the normal regmap read write logic. An example is when locking is handled by the device and rmw operations requires to do atomic operations. Allow to declare a dedicated function in regmap_config for reg_update_bits in no bus configuration. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20211104150040.1260-1-ansuelsmth@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15net: ipa: disable HOLB drop when updating timerAlex Elder
The head-of-line blocking timer should only be modified when head-of-line drop is disabled. One of the steps in recovering from a modem crash is to enable dropping of packets with timeout of 0 (immediate). We don't know how the modem configured its endpoints, so before we program the timer, we need to ensure HOL_BLOCK is disabled. Fixes: 84f9bd12d46db ("soc: qcom: ipa: IPA endpoints") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15net: ipa: HOLB register sometimes must be written twiceAlex Elder
Starting with IPA v4.5, the HOL_BLOCK_EN register must be written twice when enabling head-of-line blocking avoidance. Fixes: 84f9bd12d46db ("soc: qcom: ipa: IPA endpoints") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15net: dsa: vsc73xxx: Make vsc73xx_remove() return voidUwe Kleine-König
vsc73xx_remove() returns zero unconditionally and no caller checks the returned value. So convert the function to return no value. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15tun: fix bonding active backup with arp monitoringNicolas Dichtel
As stated in the bonding doc, trans_start must be set manually for drivers using NETIF_F_LLTX: Drivers that use NETIF_F_LLTX flag must also update netdev_queue->trans_start. If they do not, then the ARP monitor will immediately fail any slaves using that driver, and those slaves will stay down. Link: https://www.kernel.org/doc/html/v5.15/networking/bonding.html#arp-monitor-operation Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15net: stmmac: enhance XDP ZC driver level switching performanceOng Boon Leong
The previous stmmac_xdp_set_prog() implementation uses stmmac_release() and stmmac_open() which tear down the PHY device and causes undesirable autonegotiation which causes a delay whenever AFXDP ZC is setup. This patch introduces two new functions that just sufficiently tear down DMA descriptors, buffer, NAPI process, and IRQs and reestablish them accordingly in both stmmac_xdp_release() and stammac_xdp_open(). As the results of this enhancement, we get rid of transient state introduced by the link auto-negotiation: $ ./xdpsock -i eth0 -t -z sock0@eth0:0 txonly xdp-drv pps pkts 1.00 rx 0 0 tx 634444 634560 sock0@eth0:0 txonly xdp-drv pps pkts 1.00 rx 0 0 tx 632330 1267072 sock0@eth0:0 txonly xdp-drv pps pkts 1.00 rx 0 0 tx 632438 1899584 sock0@eth0:0 txonly xdp-drv pps pkts 1.00 rx 0 0 tx 632502 2532160 Reported-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15Drivers: hv: balloon: Use VMBUS_RING_SIZE() wrapper for dm_ring_sizeBoqun Feng
Baihua reported an error when boot an ARM64 guest with PAGE_SIZE=64k and BALLOON is enabled: hv_vmbus: registering driver hv_balloon hv_vmbus: probe failed for device 1eccfd72-4b41-45ef-b73a-4a6e44c12924 (-22) The cause of this is that the ringbuffer size for hv_balloon is not adjusted with VMBUS_RING_SIZE(), which makes the size not large enough for ringbuffers on guest with PAGE_SIZE=64k. Therefore use VMBUS_RING_SIZE() to calculate the ringbuffer size. Note that the old size (20 * 1024) counts a 4k header in the total size, while VMBUS_RING_SIZE() expects the parameter as the payload size, so use 16 * 1024. Cc: <stable@vger.kernel.org> # 5.15.x Reported-by: Baihua Lu <baihua.lu@microsoft.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/20211101150026.736124-1-boqun.feng@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-11-15ath11k: Increment pending_mgmt_tx count before tx send invokeP Praneesh
There is a race condition whereby the tx completion handler can be invoked before the 'num_pending_mgmt_tx" count is incremented. If that occurs, we could get warning trace indicating that 'num_pending_mgmt_tx' is 0 (because it was not yet incremented). Ideally, this trace should be seen only if mgmt tx has not happened but tx completion is received, and it is not expected in this race condition. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01386-QCAHKSWPL_SILICONZ-1 Co-developed-by: Lavanya Suresh <lavaks@codeaurora.org> Signed-off-by: Lavanya Suresh <lavaks@codeaurora.org> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1635168282-8845-1-git-send-email-quic_ppranees@quicinc.com
2021-11-15ath11k: send proper txpower and maxregpower values to firmwareP Praneesh
Set proper values for max_regpower, max_power, max_antenna_gain as it is because firmware will convert power values to 0.5dbm steps by multiplying it with 2. If txpower is not set, it will lead to cca stuck resulting in latency issues for QCN9074. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01386-QCAHKSWPL_SILICONZ-1 Co-developed-by: Lavanya Suresh <lavaks@codeaurora.org> Signed-off-by: Lavanya Suresh <lavaks@codeaurora.org> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1635164229-22880-1-git-send-email-quic_ppranees@quicinc.com
2021-11-15ath11k: fix FCS_ERR flag in radio tap headerP Praneesh
In radio tap header, BAD FCS flag is not updated properly because driver failed to update FCS_ERR flag in monitor mode. In rx_desc, FCS_ERR information is available in rx_attention structure and presence of this field indicates corresponding frame failed FCS check. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01695-QCAHKSWPL_SILICONZ-1 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1635164060-18423-1-git-send-email-quic_ppranees@quicinc.com
2021-11-15ath11k: move peer delete after vdev stop of station for QCA6390 and WCN6855Wen Gong
When station connect to AP, the wmi command sequence is: peer_create->vdev_start->vdev_up and sequence of station disconnect fo AP is: peer_delete->vdev_down->vdev_stop The sequence of disconnect is not opposite of connect, it caused firmware crash when it handle wmi vdev stop cmd when the AP is support TWT of 802.11 ax, because firmware need access the bss peer for vdev stop cmd. [ 390.438564] ath11k_pci 0000:05:00.0: wmi cmd send 0x6001 ret 0 [ 390.438567] ath11k_pci 0000:05:00.0: WMI peer create vdev_id 0 peer_addr c4:04:15:3b:e0:39 [ 390.472724] ath11k_pci 0000:05:00.0: mac vdev 0 start center_freq 2437 phymode 11ax-he20-2g [ 390.472731] ath11k_pci 0000:05:00.0: wmi cmd send 0x5003 ret 0 [ 390.560849] ath11k_pci 0000:05:00.0: wmi cmd send 0x5005 ret 0 [ 390.560850] ath11k_pci 0000:05:00.0: WMI mgmt vdev up id 0x0 assoc id 1 bssid c4:04:15:3b:e0:39 [ 399.432896] ath11k_pci 0000:05:00.0: WMI peer delete vdev_id 0 peer_addr c4:04:15:3b:e0:39 [ 399.432902] ath11k_pci 0000:05:00.0: wmi cmd send 0x6002 ret 0 [ 399.441380] ath11k_pci 0000:05:00.0: wmi cmd send 0x5007 ret 0 [ 399.441381] ath11k_pci 0000:05:00.0: WMI vdev down id 0x0 [ 399.454681] ath11k_pci 0000:05:00.0: wmi cmd send 0x5006 ret 0 [ 399.454682] ath11k_pci 0000:05:00.0: WMI vdev stop id 0x0 The opposite sequence of disconnect should be: vdev_down->vdev_stop->peer_delete This patch change the sequence of disconnect for station as above opposite sequence for QCA6390, firmware not crash again with this patch. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211027093825.12167-1-quic_wgong@quicinc.com
2021-11-15ath11k: fix the value of msecs_to_jiffies in ath11k_debugfs_fw_stats_requestWen Gong
parameter of msecs_to_jiffies should be (3 * 1000) instead of (3 * HZ) Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211026032014.27010-1-quic_wgong@quicinc.com
2021-11-15ath11k: remove return for empty tx bitrate in mac_op_sta_statisticsWen Gong
Currently in ath11k_mac_op_sta_statistics() there is the following logic: if (!arsta->txrate.legacy && !arsta->txrate.nss) return; Unfortunately if this condition is true then the function returns without setting parameters that follow the txrate. To address this issue remove the return and instead invert the logic to set the txrate logic if (arsta->txrate.legacy || arsta->txrate.nss). The same was done also in ath10k in commit 1cd6ba8ae33e ("ath10k: remove return for NL80211_STA_INFO_TX_BITRATE"). Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211011084957.31024-1-wgong@codeaurora.org
2021-11-15ath11k: enable IEEE80211_VHT_EXT_NSS_BW_CAPABLE if NSS ratio enabledWen Gong
When NSS ratio enabled reported by firmware, SUPPORTS_VHT_EXT_NSS_BW is set in ath11k, meanwhile IEEE80211_VHT_EXT_NSS_BW_CAPABLE also need to be set, otherwise it is invalid because spec in IEEE Std 802.11™‐2020 as below. Table 9-273-Supported VHT-MCS and NSS Set subfields, it has subfield VHT Extended NSS BW Capable, its definition is: Indicates whether the STA is capable of interpreting the Extended NSS BW Support subfield of the VHT Capabilities Information field. dmesg have a message without this patch: ieee80211 phy0: copying sband (band 1) due to VHT EXT NSS BW flag It means mac80211 will set IEEE80211_VHT_EXT_NSS_BW_CAPABLE if ath11k not set it in ieee80211_register_hw(). So it is better to set it in ath11k. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211013073704.15888-1-wgong@codeaurora.org
2021-11-15ath11k: avoid unnecessary lock contention in tx_completion pathP Praneesh
Avoid unnecessary idr_find calls before the idr_remove calls. Because idr_remove gives the valid ptr if id is valid otherwise return NULL ptr. So removed the idr_find before idr_remove in tx completion path. Also no need to disable the bottom half preempt if it is already in the bottom half context, so modify the spin_lock_bh to spin_lock in the data tx completion path. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1 v2 Co-developed-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: P Praneesh <ppranees@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1630560820-21905-13-git-send-email-ppranees@codeaurora.org
2021-11-15ath11k: add branch predictors in dp_tx pathP Praneesh
Add branch prediction in dp_tx code path in tx and tx completion handlers. Also in ath11k_dp_tx_complete_msdu , the pointer that is returned by rcu_dereference() is not dereferenced. so it is preferable to use rcu_access_pointer() here. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1 v2 Co-developed-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: P Praneesh <ppranees@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1630560820-21905-12-git-send-email-ppranees@codeaurora.org
2021-11-15ath11k: avoid while loop in ring selection of tx completion interruptP Praneesh
Currently while loop is used to find the tx completion ring number and it is not required since the tx ring mask and the group id can be combined to directly fetch the ring number. Hence remove the while loop and directly get the ring number from tx mask and group id. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1 v2 Co-developed-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: P Praneesh <ppranees@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1630560820-21905-11-git-send-email-ppranees@codeaurora.org
2021-11-15ath11k: remove mod operator in dst ring processingP Praneesh
Replace use of mod operator with a manual wrap around to avoid additional cost of using mod operation. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1 v2 Co-developed-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: P Praneesh <ppranees@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1630560820-21905-10-git-send-email-ppranees@codeaurora.org
2021-11-15ath11k: allocate HAL_WBM2SW_RELEASE ring from cacheable memoryP Praneesh
Similar to REO destination ring, also allocate HAL_WBM2SW_RELEASE from cacheable memory so that descriptors could be prefetched during tx completion handling. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1 v2 Co-developed-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: P Praneesh <ppranees@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1630560820-21905-9-git-send-email-ppranees@codeaurora.org
2021-11-15ath11k: add branch predictors in process_rxP Praneesh
In datapath, add branch predictors where required in the process rx(). This protects high value rx path without having performance overhead. Also while processing rx packets, the pointer that is returned by rcu_dereference() is not dereferenced. so it is preferable to use rcu_access_pointer() here. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01695-QCAHKSWPL_SILICONZ-1 Co-developed-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: P Praneesh <ppranees@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1630560820-21905-8-git-send-email-ppranees@codeaurora.org
2021-11-15ath11k: remove usage quota while processing rx packetsP Praneesh
The usage of quota variable inside ath11k_dp_rx_process_received_packets() is redundant. Since we would queue only max packets to the list before calling this function so it would never exceed quota. Hence removing usage of quota variable. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01695-QCAHKSWPL_SILICONZ-1 Co-developed-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: P Praneesh <ppranees@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1630560820-21905-7-git-send-email-ppranees@codeaurora.org
2021-11-15ath11k: avoid active pdev check for each msduP Praneesh
The Active Pdev and CAC check are done for each msdu in ath11k_dp_rx_process_received_packets which is a overhead. To avoid this overhead, collect all msdus in a per mac msdu list and pass to function. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01695-QCAHKSWPL_SILICONZ-1 Co-developed-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: P Praneesh <ppranees@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1630560820-21905-6-git-send-email-ppranees@codeaurora.org
2021-11-15ath11k: avoid additional access to ath11k_hal_srng_dst_num_freeP Praneesh
In ath11k_dp_process_rx(), after processing rx_desc from ath11k_hal_srng_dst_get_next_entry(), ath11k_hal_srng_dst_num_free() is accessed everytime because of done flag is not set. To avoid this additional access to ath11k_hal_srng_dst_num_free(), increment total_msdu_reaped only when continuation is not set and update done flag correspondingly. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01695-QCAHKSWPL_SILICONZ-1 Co-developed-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: P Praneesh <ppranees@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1630560820-21905-5-git-send-email-ppranees@codeaurora.org
2021-11-15ath11k: modify dp_rx desc access wrapper calls inlineP Praneesh
In data path, to reduce the CPU cycles spending on descriptor access wrapper function, changed those functions as static inline. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01695-QCAHKSWPL_SILICONZ-1 Co-developed-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: P Praneesh <ppranees@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1630560820-21905-4-git-send-email-ppranees@codeaurora.org
2021-11-15ath11k: allocate dst ring descriptors from cacheable memoryP Praneesh
tcl_data and reo_dst rings are currently being allocated using dma_allocate_coherent() which is non cacheable. Allocating ring memory from cacheable memory area allows cached descriptor access and prefetch next descriptors to optimize CPU usage during descriptor processing on NAPI. Based on the hardware param we can enable or disable this feature for the corresponding platform. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01695-QCAHKSWPL_SILICONZ-1 Co-developed-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Co-developed-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: P Praneesh <ppranees@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1630560820-21905-3-git-send-email-ppranees@codeaurora.org
2021-11-15ath11k: disable unused CE8 interrupts for ipq8074P Praneesh
Host driver doesn't need to process CE8 interrupts (used by target independently) The volume of interrupts is huge within short interval, CPU0 CPU1 CPU2 CPU3 14022188 0 0 0 GIC 71 Edge ce8 Hence disabling unused CE8 interrupt will improve CPU usage. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01695-QCAHKSWPL_SILICONZ-1 Co-developed-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: P Praneesh <ppranees@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1630560820-21905-2-git-send-email-ppranees@codeaurora.org
2021-11-15ath11k: fix firmware crash during channel switchVenkateswara Naralasetty
Currently the updated bandwidth for the peer will be configured to the firmware after channel switch from the sta_rc_update_wk. If the updated bandwidth is greater than the configured peer phymode during the peer assoc may result firmware assert. For example, initially AP is in HE40 mode and the peer phymode is configured as MODE_11AX_HE40 during peer assoc. Now user change the channel width to HE80 then, the peer bandwidth will be updated as HE80 to the firmware. This will trigger firmware assert due to peer bandwidth is greater than the peer phymode. Fix this issue by sending peer assoc command before setting the updated peer bandwith to firmware. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1636644002-25446-1-git-send-email-quic_vnaralas@quicinc.com
2021-11-15ath11k: Fix 'unused-but-set-parameter' errorSeevalamuthu Mariappan
Below compilation error is reported when built with W=1, drivers/net/wireless/ath/ath11k/mac.c:5408:22: error: parameter 'changed_flags' set but not used [-Werror,-Wunused-but-set-parameter] changed_flags is set, but left unused. So, remove unnecessary set. Compile tested only. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Seevalamuthu Mariappan <quic_seevalam@quicinc.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1636609967-5114-1-git-send-email-quic_seevalam@quicinc.com
2021-11-15ath11k: fix DMA memory free in CE pipe cleanupKarthikeyan Periyasamy
In CE pipe cleanup, DMA memory gets freed by the aligned address (base_addr_owner_space) which is wrong. It needs to be freed by the address (base_addr_owner_space_unaligned) returned by dma_alloc. So free the dma memory by the proper address. This was found in code review. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00729-QCAHKSWPL_SILICONZ-3 v2 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1636561290-18966-1-git-send-email-quic_periyasa@quicinc.com
2021-11-15ath11k: avoid unnecessary BH disable lock in STA kickout eventKarthikeyan Periyasamy
In STA kickout event processing, the peer object is protected under spin lock BH. Release this lock after picking up the vdev_id from the peer object instead after ieee80211_report_low_ack(). This will minimize the lock hold period which will improve performance since base_lock is used across the data path. This was found in code review. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00729-QCAHKSWPL_SILICONZ-3 v2 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1636560388-24955-1-git-send-email-quic_periyasa@quicinc.com
2021-11-15ath11k: fix error routine when fallback of add interface failsKarthikeyan Periyasamy
When there is an error in add interface process from ath11k_mac_set_kickout(), the code attempts to handle a fallback for add_interface. When this fallback succeeds, the driver returns zero rather than error code. This leads to success for the non created VAP. In cleanup, driver gets remove interface callback for the non created VAP and proceeds to self peer delete request which leads to FW assert. Since it was already deleted on the fallback of add interface, return the actual error code instead of fallback return code. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00729-QCAHKSWPL_SILICONZ-3 v2 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1636558557-2874-1-git-send-email-quic_periyasa@quicinc.com
2021-11-15ath11k: fix fw crash due to peer get authorized before key installKarthikeyan Periyasamy
Firmware expects host to authorize the peer after the successful key install. But host authorize the peer before the key install, this trigger the firmware assert which leads to Q6 crash. To avoid this Q6 crash, host should authorize the peer after the key install. So introduce is_authorized in peer object to identify that peer is authorize or not. When IEEE80211_STA_CONTROL_PORT flag is unset, peer move to authorize state before the vdev up. When the same flag is set then peer move to authorize state after vdev up. So added authorise check in ath11k_bss_assoc() to handle the earlier state transition case. Also added the WMI authorize procedure in ath11k_mac_op_sta_state() to handle the non-earlier state transition case. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1636554200-12345-1-git-send-email-quic_periyasa@quicinc.com
2021-11-14Merge tag 'sh-for-5.16' of git://git.libc.org/linux-shLinus Torvalds
Pull arch/sh updates from Rich Felker. * tag 'sh-for-5.16' of git://git.libc.org/linux-sh: sh: pgtable-3level: Fix cast to pointer from integer of different size sh: fix READ/WRITE redefinition warnings sh: define __BIG_ENDIAN for math-emu sh: math-emu: drop unused functions sh: fix kconfig unmet dependency warning for FRAME_POINTER sh: Cleanup about SPARSE_IRQ sh: kdump: add some attribute to function maple: fix wrong return value of maple_bus_init(). sh: boot: avoid unneeded rebuilds under arch/sh/boot/compressed/ sh: boot: add intermediate vmlinux.bin* to targets instead of extra-y sh: boards: Fix the cacography in irq.c sh: check return code of request_irq sh: fix trivial misannotations
2021-11-14Merge tag 'devicetree-fixes-for-5.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Two fixes due to DT node name changes on Arm, Ltd. boards - Treewide rename of Ingenic CGU headers - Update ST email addresses - Remove Netlogic DT bindings - Dropping few more cases of redundant 'maxItems' in schemas - Convert toshiba,tc358767 bridge binding to schema * tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: watchdog: sunxi: fix error in schema bindings: media: venus: Drop redundant maxItems for power-domain-names dt-bindings: Remove Netlogic bindings clk: versatile: clk-icst: Ensure clock names are unique of: Support using 'mask' in making device bus id dt-bindings: treewide: Update @st.com email address to @foss.st.com dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml dt-bindings: media: Update maintainers for st,stm32-cec.yaml dt-bindings: mfd: timers: Update maintainers for st,stm32-timers dt-bindings: timer: Update maintainers for st,stm32-timer dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml dt-bindings: Rename Ingenic CGU headers to ingenic,*.h
2021-11-14Merge tag 'irq-urgent-2021-11-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes for the interrupt subsystem Core code: - A regression fix for the Open Firmware interrupt mapping code where a interrupt controller property in a node caused a map property in the same node to be ignored. Interrupt chip drivers: - Workaround a limitation in SiFive PLIC interrupt chip which silently ignores an EOI when the interrupt line is masked. - Provide the missing mask/unmask implementation for the CSKY MP interrupt controller. PCI/MSI: - Prevent a use after free when PCI/MSI interrupts are released by destroying the sysfs entries before freeing the memory which is accessed in the sysfs show() function. - Implement a mask quirk for the Nvidia ION AHCI chip which does not advertise masking capability despite implementing it. Even worse the chip comes out of reset with all MSI entries masked, which due to the missing masking capability never get unmasked. - Move the check which prevents accessing the MSI[X] masking for XEN back into the low level accessors. The recent consolidation missed that these accessors can be invoked from places which do not have that check which broke XEN. Move them back to he original place instead of sprinkling tons of these checks all over the code" * tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: of/irq: Don't ignore interrupt-controller when interrupt-map failed irqchip/sifive-plic: Fixup EOI failed when masked irqchip/csky-mpintc: Fixup mask/unmask implementation PCI/MSI: Destroy sysfs before freeing entries PCI: Add MSI masking quirk for Nvidia ION AHCI PCI/MSI: Deal with devices lying about their MSI mask capability PCI/MSI: Move non-mask check back into low level accessors
2021-11-14Merge tag 'sched_urgent_for_v5.16_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Avoid touching ~100 config files in order to be able to select the preemption model - clear cluster CPU masks too, on the CPU unplug path - prevent use-after-free in cfs - Prevent a race condition when updating CPU cache domains - Factor out common shared part of smp_prepare_cpus() into a common helper which can be called by both baremetal and Xen, in order to fix a booting of Xen PV guests * tag 'sched_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: preempt: Restore preemption model selection configs arch_topology: Fix missing clear cluster_cpumask in remove_cpu_topology() sched/fair: Prevent dead task groups from regaining cfs_rq's sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain() x86/smp: Factor out parts of native_smp_prepare_cpus()
2021-11-14Merge tag 'irqchip-fixes-5.16-1' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Address an issue with the SiFive PLIC being unable to EOI a masked interrupt - Move the disable/enable methods in the CSky mpintc to mask/unmask - Fix a regression in the OF irq code where an interrupt-controller property in the same node as an interrupt-map property would get ignored Link: https://lore.kernel.org/all/20211112173459.4015233-1-maz@kernel.org
2021-11-13Merge tag 'virtio-mem-for-5.16' of git://github.com/davidhildenbrand/linuxLinus Torvalds
Pull virtio-mem update from David Hildenbrand: "Support the VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature in virtio-mem, now that "accidential" access to logically unplugged memory inside added Linux memory blocks is no longer possible, because we: - Removed /dev/kmem in commit bbcd53c96071 ("drivers/char: remove /dev/kmem for good") - Disallowed access to virtio-mem device memory via /dev/mem in commit 2128f4e21aa ("virtio-mem: disallow mapping virtio-mem memory via /dev/mem") - Sanitized access to virtio-mem device memory via /proc/kcore in commit 0daa322b8ff9 ("fs/proc/kcore: don't read offline sections, logically offline pages and hwpoisoned pages") - Sanitized access to virtio-mem device memory via /proc/vmcore in commit ce2814622e84 ("virtio-mem: kdump mode to sanitize /proc/vmcore access") The new VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature that will be required by some hypervisors implementing virtio-mem in the near future, so let's support it now that we safely can" * tag 'virtio-mem-for-5.16' of git://github.com/davidhildenbrand/linux: virtio-mem: support VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE
2021-11-13Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull more clk updates from Stephen Boyd: "This is the second batch of clk driver updates that needed a little more time to soak in linux-next. - Use modern i2c probe in vc5 - Cleanup some includes - Update links to datasheets - Add UniPhier NX1 SoC clk support - Fix DT bindings for SiFive FU740 - Revert the module platform driver support for Rockchip because it wasn't actually tested - Fix the composite clk code again as the previous fix had a one line bug that broke rate changes for clks that want to use the same parent still - Use the right table for a divider in ast2600 driver - Get rid of gcc_aggre1_pnoc_ahb_clk in qcom clk driver again because its critical but unused" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: gcc-msm8996: Drop (again) gcc_aggre1_pnoc_ahb_clk clk: imx8m: Do not set IMX_COMPOSITE_CORE for non-regular composites clk/ast2600: Fix soc revision for AHB clk: composite: Fix 'switching' to same clock clk: rockchip: drop module parts from rk3399 and rk3568 drivers Revert "clk: rockchip: use module_platform_driver_probe" clk:mediatek: remove duplicate include in clk-mt8195-imp_iic_wrap.c dt-bindings: clock: fu740-prci: add reset-cells clk: uniphier: Add SoC-glue clock source selector support for Pro4 dt-bindings: clock: uniphier: Add clock binding for SoC-glue clk: uniphier: Add NX1 clock support dt-bindings: clock: uniphier: Add NX1 clock binding clk: uniphier: Add audio system and video input clock control for PXs3 clk: si5351: Update datasheet references clk: vc5: Use i2c .probe_new clk/actions/owl-factor.c: remove superfluous headers clk: ingenic: Fix bugs with divided dividers
2021-11-13Merge tag 's390-5.16-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Vasily Gorbik: - Add PCI automatic error recovery. - Fix tape driver timer initialization broken during timers api cleanup. - Fix bogus CPU measurement counters values on CPUs offlining. - Check the validity of subchanel before reading other fields in the schib in cio code. * tag 's390-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cio: check the subchannel validity for dev_busid s390/cpumf: cpum_cf PMU displays invalid value after hotplug remove s390/tape: fix timer initialization in tape_std_assign() s390/pci: implement minimal PCI error recovery PCI: Export pci_dev_lock() s390/pci: implement reset_slot for hotplug slot s390/pci: refresh function handle in iomap
2021-11-13Merge tag 'mips_5.16_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull more MIPS updates from Thomas Bogendoerfer: - Config updates for BMIPS platform - Build fixes - Makefile cleanups * tag 'mips_5.16_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: mips: decompressor: do not copy source files while building MIPS: boot/compressed/: add __bswapdi2() to target for ZSTD decompression MIPS: fix duplicated slashes for Platform file path MIPS: fix *-pkg builds for loongson2ef platform PCI: brcmstb: Allow building for BMIPS_GENERIC MIPS: BMIPS: Enable PCI Kconfig MIPS: VDSO: remove -nostdlib compiler flag mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set MIPS: Update bmips_stb_defconfig MIPS: Allow modules to set board_be_handler
2021-11-12ethernet: sis900: fix indentationJakub Kicinski
A space has snuck in. Reported-by: kernel test robot <lkp@intel.com> Fixes: 74fad215ee3d ("ethernet: sis900: use eth_hw_addr_set()") Link: https://lore.kernel.org/r/20211111210824.676201-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-12net/ipa: ipa_resource: Fix wrong for loop rangeKonrad Dybcio
The source group count was mistakenly assigned to both dst and src loops. Fix it to make IPA probe and work again. Fixes: 4fd704b3608a ("net: ipa: record number of groups in data") Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20211111183724.593478-1-konrad.dybcio@somainline.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-12ptp: ptp_clockmatrix: repair non-kernel-doc commentRandy Dunlap
Do not use "/**" to begin a comment that is not in kernel-doc format. Prevents this docs build warning: drivers/ptp/ptp_clockmatrix.c:1679: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Maximum absolute value for write phase offset in picoseconds Then remove the kernel-doc-like function parameter descriptions since they don't add any useful info. (suggested by Jakub) Fixes: 794c3dffacc16 ("ptp: ptp_clockmatrix: Add support for FW 5.2 (8A34005)") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Min Li <min.li.xe@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20211111155034.29153-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-12hamradio: remove needs_free_netdev to avoid UAFLin Ma
The former patch "defer 6pack kfree after unregister_netdev" reorders the kfree of two buffer after the unregister_netdev to prevent the race condition. It also adds free_netdev() function in sixpack_close(), which is a direct copy from the similar code in mkiss_close(). However, in sixpack driver, the flag needs_free_netdev is set to true in sp_setup(), hence the unregister_netdev() will free the netdev automatically. Therefore, as the sp is netdev_priv, use-after-free occurs. This patch removes the needs_free_netdev = true and just let the free_netdev to finish this deallocation task. Fixes: 0b9111922b1f ("hamradio: defer 6pack kfree after unregister_netdev") Signed-off-by: Lin Ma <linma@zju.edu.cn> Link: https://lore.kernel.org/r/20211111141402.7551-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-12Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "This series is all the stragglers that didn't quite make the first merge window pull. It's mostly minor updates and bug fixes of merge window code but it also has two driver updates: ufs and qla2xxx" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (46 commits) scsi: scsi_debug: Don't call kcalloc() if size arg is zero scsi: core: Remove command size deduction from scsi_setup_scsi_cmnd() scsi: scsi_ioctl: Validate command size scsi: ufs: ufshpb: Properly handle max-single-cmd scsi: core: Avoid leaving shost->last_reset with stale value if EH does not run scsi: bsg: Fix errno when scsi_bsg_register_queue() fails scsi: sr: Remove duplicate assignment scsi: ufs: ufs-exynos: Introduce ExynosAuto v9 virtual host scsi: ufs: ufs-exynos: Multi-host configuration for ExynosAuto v9 scsi: ufs: ufs-exynos: Support ExynosAuto v9 UFS scsi: ufs: ufs-exynos: Add pre/post_hce_enable drv callbacks scsi: ufs: ufs-exynos: Factor out priv data init scsi: ufs: ufs-exynos: Add EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR option scsi: ufs: ufs-exynos: Support custom version of ufs_hba_variant_ops scsi: ufs: ufs-exynos: Add setup_clocks callback scsi: ufs: ufs-exynos: Add refclkout_stop control scsi: ufs: ufs-exynos: Simplify drv_data retrieval scsi: ufs: ufs-exynos: Change pclk available max value scsi: ufs: Add quirk to enable host controller without PH configuration scsi: ufs: Add quirk to handle broken UIC command ...
2021-11-12Merge tag 'pwm/for-5.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set is mostly small fixes and cleanups, so more of a janitorial update for this cycle" * tag 'pwm/for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: vt8500: Rename pwm_busy_wait() to make it obviously driver-specific dt-bindings: pwm: tpu: Add R-Car M3-W+ device tree bindings dt-bindings: pwm: tpu: Add R-Car V3U device tree bindings pwm: pwm-samsung: Trigger manual update when disabling PWM pwm: visconti: Simplify using devm_pwmchip_add() pwm: samsung: Describe driver in Kconfig pwm: Make it explicit that pwm_apply_state() might sleep pwm: Add might_sleep() annotations for !CONFIG_PWM API functions pwm: atmel: Drop unused header
2021-11-12Merge tag 'drm-next-2021-11-12' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull more drm updates from Dave Airlie: "I missed a drm-misc-next pull for the main pull last week. It wasn't that major and isn't the bulk of this at all. This has a bunch of fixes all over, a lot for amdgpu and i915. bridge: - HPD improvments for lt9611uxc - eDP aux-bus support for ps8640 - LVDS data-mapping selection support ttm: - remove huge page functionality (needs reworking) - fix a race condition during BO eviction panels: - add some new panels fbdev: - fix double-free - remove unused scrolling acceleration - CONFIG_FB dep improvements locking: - improve contended locking logging - naming collision fix dma-buf: - add dma_resv_for_each_fence iterator - fix fence refcounting bug - name locking fixesA prime: - fix object references during mmap nouveau: - various code style changes - refcount fix - device removal fixes - protect client list with a mutex - fix CE0 address calculation i915: - DP rates related fixes - Revert disabling dual eDP that was causing state readout problems - put the cdclk vtables in const data - Fix DVO port type for older platforms - Fix blankscreen by turning DP++ TMDS output buffers on encoder->shutdown - CCS FBs related fixes - Fix recursive lock in GuC submission - Revert guc_id from i915_request tracepoint - Build fix around dmabuf amdgpu: - GPU reset fix - Aldebaran fix - Yellow Carp fixes - DCN2.1 DMCUB fix - IOMMU regression fix for Picasso - DSC display fixes - BPC display calculation fixes - Other misc display fixes - Don't allow partial copy from user for DC debugfs - SRIOV fixes - GFX9 CSB pin count fix - Various IP version check fixes - DP 2.0 fixes - Limit DCN1 MPO fix to DCN1 amdkfd: - SVM fixes - Fix gfx version for renoir - Reset fixes udl: - timeout fix imx: - circular locking fix virtio: - NULL ptr deref fix" * tag 'drm-next-2021-11-12' of git://anongit.freedesktop.org/drm/drm: (126 commits) drm/ttm: Double check mem_type of BO while eviction drm/amdgpu: add missed support for UVD IP_VERSION(3, 0, 64) drm/amdgpu: drop jpeg IP initialization in SRIOV case drm/amd/display: reject both non-zero src_x and src_y only for DCN1x drm/amd/display: Add callbacks for DMUB HPD IRQ notifications drm/amd/display: Don't lock connection_mutex for DMUB HPD drm/amd/display: Add comment where CONFIG_DRM_AMD_DC_DCN macro ends drm/amdkfd: Fix retry fault drain race conditions drm/amdkfd: lower the VAs base offset to 8KB drm/amd/display: fix exit from amdgpu_dm_atomic_check() abruptly drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov drm/amdgpu: fix uvd crash on Polaris12 during driver unloading drm/i915/adlp/fb: Prevent the mapping of redundant trailing padding NULL pages drm/i915/fb: Fix rounding error in subsampled plane size calculation drm/i915/hdmi: Turn DP++ TMDS output buffers back on in encoder->shutdown() drm/locking: fix __stack_depot_* name conflict drm/virtio: Fix NULL dereference error in virtio_gpu_poll drm/amdgpu: fix SI handling in amdgpu_device_asic_has_dc_support() drm/amdgpu: Fix dangling kfd_bo pointer for shared BOs drm/amd/amdkfd: Don't sent command to HWS on kfd reset ...
generated by cgit (git 2.34.1) at 2025-09-10 21:57:53 +0000