| Age | Commit message (Collapse) | Author |
|---|
|
The resource_size defines that:
res->end - res->start + 1;
The origin original code is:
sysmgr_config.max_register = res->end - res->start - 3;
So, the correct fix is that:
sysmgr_config.max_register = resource_size(res) - 4;
Fixes: d12edf9661a4 ("mfd: altera-sysmgr: Use resource_size function on resource object")
Signed-off-by: Kai Song <songkai01@inspur.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211006141926.6120-1-songkai01@inspur.com
|
|
The Arizona driver has both some devices which only have an I2C
interface and some which only have a SPI interface. Currently both of
these share an of_match table, but this means inapproriate compatibles
are available for each interface. Tidy this up by creating a table for
each interface listing only the appropriate compatibles.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210928163035.23960-1-ckeepax@opensource.cirrus.com
|
|
PM8xxx PMIC family uses GPIO as parent IRQ. Using it together with the
irq_set_chained_handler_and_data() results in warnings from the GPIOLIB
(see 461c1a7d4733 ("gpiolib: override irq_enable/disable"))
as in this path the IRQ resources are not allocated (and thus the
corresponding GPIO is not marked as used for the IRQ. Use request_irq so
that the IRQ resources are proprely setup.
[ 0.803271] ------------[ cut here ]------------
[ 0.803338] WARNING: CPU: 3 PID: 1 at drivers/gpio/gpiolib.c:3207 gpiochip_enable_irq+0xa4/0xa8
[ 0.803470] Modules linked in:
[ 0.803542] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.14.0-rc6-next-20210820-postmarketos-qcom-apq8064+ #1
[ 0.803645] Hardware name: Generic DT based system
[ 0.803710] Backtrace:
[ 0.803777] [<c0e3493c>] (dump_backtrace) from [<c0e34d00>] (show_stack+0x20/0x24)
[ 0.803911] r7:00000c87 r6:c07062dc r5:60000093 r4:c11d0f54
[ 0.803980] [<c0e34ce0>] (show_stack) from [<c0e38314>] (dump_stack_lvl+0x48/0x54)
[ 0.804097] [<c0e382cc>] (dump_stack_lvl) from [<c0e38338>] (dump_stack+0x18/0x1c)
[ 0.804217] r5:00000009 r4:c11fe208
[ 0.804274] [<c0e38320>] (dump_stack) from [<c03219c8>] (__warn+0xfc/0x114)
[ 0.804387] [<c03218cc>] (__warn) from [<c0e35334>] (warn_slowpath_fmt+0x74/0xd0)
[ 0.804509] r7:c07062dc r6:00000c87 r5:c11fe208 r4:00000000
[ 0.804577] [<c0e352c4>] (warn_slowpath_fmt) from [<c07062dc>] (gpiochip_enable_irq+0xa4/0xa8)
[ 0.804716] r8:c27b6200 r7:c27aec00 r6:c27aec18 r5:cf77a448 r4:c02225f0
[ 0.804789] [<c0706238>] (gpiochip_enable_irq) from [<c0706348>] (gpiochip_irq_enable+0x28/0x38)
[ 0.804921] r5:cf77a448 r4:c27aec18
[ 0.804977] [<c0706320>] (gpiochip_irq_enable) from [<c03897a0>] (irq_enable+0x48/0x78)
[ 0.805111] r5:00000000 r4:c27aec00
[ 0.805167] [<c0389758>] (irq_enable) from [<c0389850>] (__irq_startup+0x80/0xbc)
[ 0.805286] r5:00000000 r4:c27aec00
[ 0.805343] [<c03897d0>] (__irq_startup) from [<c038996c>] (irq_startup+0xe0/0x18c)
[ 0.805468] r7:c27aec00 r6:00000001 r5:00000000 r4:c27aec00
[ 0.805535] [<c038988c>] (irq_startup) from [<c0389a54>] (irq_activate_and_startup+0x3c/0x74)
[ 0.805669] r7:c27aec00 r6:00000001 r5:c27aec00 r4:00000000
[ 0.805736] [<c0389a18>] (irq_activate_and_startup) from [<c0389b58>] (__irq_do_set_handler+0xcc/0x1c0)
[ 0.805875] r7:c27aec00 r6:c0383710 r5:c08a16b0 r4:00000001
[ 0.805943] [<c0389a8c>] (__irq_do_set_handler) from [<c0389d80>] (irq_set_chained_handler_and_data+0x60/0x98)
[ 0.806087] r7:c27b5c10 r6:c27aed40 r5:c08a16b0 r4:c27aec00
[ 0.806154] [<c0389d20>] (irq_set_chained_handler_and_data) from [<c08a1660>] (pm8xxx_probe+0x1fc/0x24c)
[ 0.806298] r6:0000003a r5:0000003a r4:c27b5c00
[ 0.806359] [<c08a1464>] (pm8xxx_probe) from [<c0871420>] (platform_probe+0x6c/0xc8)
[ 0.806495] r10:c2507080 r9:e8bea2cc r8:c165e0e0 r7:c165e0e0 r6:c15f08f8 r5:c27b5c10
[ 0.806582] r4:00000000
[ 0.806632] [<c08713b4>] (platform_probe) from [<c086e280>] (really_probe+0xe8/0x460)
[ 0.806769] r7:c165e0e0 r6:c15f08f8 r5:00000000 r4:c27b5c10
[ 0.806837] [<c086e198>] (really_probe) from [<c086e6a8>] (__driver_probe_device+0xb0/0x22c)
[ 0.806975] r7:c27b5c10 r6:cf70fba4 r5:c15f08f8 r4:c27b5c10
[ 0.807042] [<c086e5f8>] (__driver_probe_device) from [<c086e868>] (driver_probe_device+0x44/0xe0)
[ 0.807188] r9:e8bea2cc r8:00000000 r7:c27b5c10 r6:cf70fba4 r5:c16ae4b4 r4:c16ae4b0
[ 0.807271] [<c086e824>] (driver_probe_device) from [<c086ecd8>] (__device_attach_driver+0xb4/0x12c)
[ 0.807421] r9:e8bea2cc r8:c15eec08 r7:c27b5c10 r6:cf70fba4 r5:c15f08f8 r4:00000001
[ 0.807506] [<c086ec24>] (__device_attach_driver) from [<c086c06c>] (bus_for_each_drv+0x94/0xe4)
[ 0.807651] r7:c16ae484 r6:c086ec24 r5:cf70fba4 r4:00000000
[ 0.807718] [<c086bfd8>] (bus_for_each_drv) from [<c086e0e0>] (__device_attach+0x104/0x19c)
[ 0.807852] r6:00000001 r5:c27b5c54 r4:c27b5c10
[ 0.807913] [<c086dfdc>] (__device_attach) from [<c086eef4>] (device_initial_probe+0x1c/0x20)
[ 0.808050] r6:c27b5c10 r5:c15ef1b0 r4:c27b5c10
[ 0.808111] [<c086eed8>] (device_initial_probe) from [<c086d00c>] (bus_probe_device+0x94/0x9c)
[ 0.808240] [<c086cf78>] (bus_probe_device) from [<c086a60c>] (device_add+0x404/0x8f4)
[ 0.808370] r7:c16ae484 r6:c251ba10 r5:00000000 r4:c27b5c10
[ 0.808439] [<c086a208>] (device_add) from [<c0a82f50>] (of_device_add+0x44/0x4c)
[ 0.808581] r10:c144c854 r9:00000001 r8:e8bea314 r7:c251ba10 r6:00000000 r5:00000000
[ 0.808669] r4:c27b5c00
[ 0.808718] [<c0a82f0c>] (of_device_add) from [<c0a836cc>] (of_platform_device_create_pdata+0xa0/0xc8)
[ 0.808850] [<c0a8362c>] (of_platform_device_create_pdata) from [<c0a83908>] (of_platform_bus_create+0x1f0/0x514)
[ 0.809005] r9:00000001 r8:c251ba10 r7:00000000 r6:00000000 r5:00000000 r4:e8bea2b0
[ 0.809086] [<c0a83718>] (of_platform_bus_create) from [<c0a83e04>] (of_platform_populate+0x98/0x128)
[ 0.809233] r10:c144c854 r9:00000001 r8:c251ba10 r7:00000000 r6:00000000 r5:e8bea170
[ 0.809321] r4:e8bea2b0
[ 0.809371] [<c0a83d6c>] (of_platform_populate) from [<c0a83f20>] (devm_of_platform_populate+0x60/0xa8)
[ 0.809521] r9:0000011d r8:c165e0e0 r7:e8bea170 r6:c2c34f40 r5:c2cac140 r4:c251ba10
[ 0.809604] [<c0a83ec0>] (devm_of_platform_populate) from [<c08a212c>] (ssbi_probe+0x138/0x16c)
[ 0.809738] r6:c2c34f40 r5:c251ba10 r4:ff822700
[ 0.809800] [<c08a1ff4>] (ssbi_probe) from [<c0871420>] (platform_probe+0x6c/0xc8)
[ 0.809923] r7:c165e0e0 r6:c15f0a80 r5:c251ba10 r4:00000000
[ 0.809989] [<c08713b4>] (platform_probe) from [<c086e280>] (really_probe+0xe8/0x460)
[ 0.810120] r7:c165e0e0 r6:c15f0a80 r5:00000000 r4:c251ba10
[ 0.810187] [<c086e198>] (really_probe) from [<c086e6a8>] (__driver_probe_device+0xb0/0x22c)
[ 0.810325] r7:c251ba10 r6:c15f0a80 r5:c15f0a80 r4:c251ba10
[ 0.810393] [<c086e5f8>] (__driver_probe_device) from [<c086e868>] (driver_probe_device+0x44/0xe0)
[ 0.810539] r9:0000011d r8:00000000 r7:c251ba10 r6:c15f0a80 r5:c16ae4b4 r4:c16ae4b0
[ 0.810623] [<c086e824>] (driver_probe_device) from [<c086ee2c>] (__driver_attach+0xdc/0x188)
[ 0.810766] r9:0000011d r8:c144c834 r7:00000000 r6:c15f0a80 r5:c251ba10 r4:00000000
[ 0.810849] [<c086ed50>] (__driver_attach) from [<c086bf60>] (bus_for_each_dev+0x88/0xd4)
[ 0.810985] r7:00000000 r6:c086ed50 r5:c15f0a80 r4:00000000
[ 0.811052] [<c086bed8>] (bus_for_each_dev) from [<c086dad4>] (driver_attach+0x2c/0x30)
[ 0.811182] r6:c15ef1b0 r5:c2c34e80 r4:c15f0a80
[ 0.811243] [<c086daa8>] (driver_attach) from [<c086d2dc>] (bus_add_driver+0x180/0x21c)
[ 0.811364] [<c086d15c>] (bus_add_driver) from [<c086fa6c>] (driver_register+0x84/0x118)
[ 0.811492] r7:00000000 r6:ffffe000 r5:c1428210 r4:c15f0a80
[ 0.811558] [<c086f9e8>] (driver_register) from [<c0871174>] (__platform_driver_register+0x2c/0x34)
[ 0.811683] r5:c1428210 r4:c16524a0
[ 0.811739] [<c0871148>] (__platform_driver_register) from [<c1428234>] (ssbi_driver_init+0x24/0x28)
[ 0.811868] [<c1428210>] (ssbi_driver_init) from [<c0302394>] (do_one_initcall+0x68/0x2c8)
[ 0.811990] [<c030232c>] (do_one_initcall) from [<c140147c>] (kernel_init_freeable+0x1dc/0x23c)
[ 0.812135] r7:cf7b0400 r6:c130339c r5:00000007 r4:c147f6a0
[ 0.812204] [<c14012a0>] (kernel_init_freeable) from [<c0e40e60>] (kernel_init+0x20/0x138)
[ 0.812345] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0e40e40
[ 0.812433] r4:00000000
[ 0.812483] [<c0e40e40>] (kernel_init) from [<c0300150>] (ret_from_fork+0x14/0x24)
[ 0.812596] Exception stack(0xcf70ffb0 to 0xcf70fff8)
[ 0.812684] ffa0: 00000000 00000000 00000000 00000000
[ 0.812809] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 0.812923] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 0.813008] r5:c0e40e40 r4:00000000
[ 0.813075] ---[ end trace ad2443eee078d094 ]---
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: David Heidelberg <david@ixit.cz> # on Nexus 7 (deb)
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210925234333.2430755-1-dmitry.baryshkov@linaro.org
|
|
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding a SPI device ID table.
Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210924143347.14721-4-broonie@kernel.org
|
|
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding a SPI device ID table.
Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210924143347.14721-3-broonie@kernel.org
|
|
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding a SPI device ID table.
Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210924143347.14721-2-broonie@kernel.org
|
|
Describe better which driver applies to which SoC, to make configuring
kernel for Samsung SoC easier.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210924133332.112092-1-krzysztof.kozlowski@canonical.com
|
|
Early exits from for_each_child_of_node() should decrement the
node reference counter. Reported by Coccinelle:
drivers/mfd/mfd-core.c:197:2-24: WARNING:
Function "for_each_child_of_node" should have of_node_put() before goto around lines 209.
Fixes: c94bb233a9fe ("mfd: Make MFD core code Device Tree and IRQ domain aware")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210528115126.18370-1-krzysztof.kozlowski@canonical.com
|
|
Added 8086:38a8 to the intel_lpss_pci driver. It is an Intel Ice Lake
PCH-N UART controler present on the MacBookPro16,2.
Signed-off-by: Orlando Chamberlain <redecorating@protonmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211002111449.12674-1-redecorating@protonmail.com
|
|
Interrupt line can be configured on different hardware in different way,
even inverted. Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.
The Maxim 14577/77836 datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.
The interrupt line is shared between PMIC and charger driver, so using
level sensitive interrupt is here especially important to avoid races.
With an edge configuration in case if first PMIC signals interrupt
followed shortly after by the RTC, the interrupt might not be yet
cleared/acked thus the second one would not be noticed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602110445.33536-4-krzysztof.kozlowski@canonical.com
|
|
Interrupt line can be configured on different hardware in different way,
even inverted. Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.
The Maxim 77693 datasheet describes the interrupt line as active low
with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.
The interrupt line is shared between PMIC and RTC driver, so using level
sensitive interrupt is here especially important to avoid races. With
an edge configuration in case if first PMIC signals interrupt followed
shortly after by the RTC, the interrupt might not be yet cleared/acked
thus the second one would not be noticed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602110445.33536-3-krzysztof.kozlowski@canonical.com
|
|
Interrupt line can be configured on different hardware in different way,
even inverted. Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.
The Maxim 77686 datasheet describes the interrupt line as active low
with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.
The interrupt line is shared between PMIC and RTC driver, so using level
sensitive interrupt is here especially important to avoid races. With
an edge configuration in case if first PMIC signals interrupt followed
shortly after by the RTC, the interrupt might not be yet cleared/acked
thus the second one would not be noticed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602110445.33536-2-krzysztof.kozlowski@canonical.com
|
|
Interrupt line can be configured on different hardware in different way,
even inverted. Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.
The Samsung PMIC drivers are used only on Devicetree boards.
Additionally, the PMIC datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.
Marek Szyprowski reports that together with DTS change (proper level in
DTS) it fixes RTC alarm failure that he observed from time to time on
TM2e board.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602110445.33536-1-krzysztof.kozlowski@canonical.com
|
|
The MODULE_DEVICE_TABLE already creates proper alias. Having another
MODULE_ALIAS causes the alias to be duplicated:
$ modinfo cros_ec_dev.ko
alias: platform:cros-ec-dev
srcversion: F84A69D2156719A4F717A76
alias: platform:cros-ec-dev
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
The description mentioned AD5520, which is a different device.
Fixed the typo.
Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
SC2730 is a PMIC SoC integrated in UMS512.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
This update adds new regmap to support the latest EA silicon
which will be selected based on the chip and variant
information read from the device.
Signed-off-by: Carlos de Paula <me@carlosedp.com>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
RK817 has a power-off bit in SYS_CFG3. Add support for powering
off the PMIC.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
The intel_pmt driver shows up as a compile option for all arches but is
32-bit and 64-bit x86 specific.
Add a CONFIG dependency on X86 for intel_pmt.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
'ib-mfd-misc-regulator-5.16' and 'tb-mfd-from-regulator-5.16' into ibs-for-mfd-merged
|
|
fix the remaining build issues reported by patchwork
in firmware v4.0 support commit which has been already
merged.
Fix patchwork issues:
- source inline
- checkpatch
Fixes: bb5dbf2cc64d ("net: marvell: prestera: add firmware v4.0 support")
Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'net/protocol.h' included in 'drivers/net/amt.c' is duplicated.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Zhang Mingyu <zhang.mingyu@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mii ioctls are now handled by the ndo_eth_ioctl() callback,
not the old ndo_do_ioctl(), but octeontx2-nicvf introduced the
function for the old way.
Move it over to ndo_eth_ioctl() to actually allow calling it from
user space.
Fixes: 43510ef4ddad ("octeontx2-nicvf: Add PTP hardware clock support to NIX VF")
Fixes: a76053707dbf ("dev_ioctl: split out ndo_eth_ioctl")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The timestamp ioctls are now handled by the ndo_eth_ioctl() callback,
not the old ndo_do_ioctl(), but oax88796 introduced the
function for the old way.
Move it over to ndo_eth_ioctl() to actually allow calling it from
user space.
Fixes: a97c69ba4f30 ("net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver")
Fixes: a76053707dbf ("dev_ioctl: split out ndo_eth_ioctl")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Lukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
- proper support of Xiaomi Mi buttons (Ilya Skriblovsky)
|
|
- improvement of device management handling (Cai Huoqing, Jason Gerecke)
|
|
- support for new revision of the NitroKey U2F device firmware
(Andrej Shadura)
|
|
- support for Nintendo Switch Pro Controllers and Joy-Cons (Daniel J. Ogorchock)
|
|
- LED handling improvements (Roderick Colenbrander)
|
|
- update to handle TransducerSerialNumber2 which has been recently
added to the specification (Felipe Balbi)
|
|
|
|
- support for 2021 Magic Keyboard (Alex Henrie)
- tidle key quirk handling improvement (Alex Henrie)
|
|
- code cleanups (Basavaraj Natikar, Christophe JAILLET)
|
|
The Pericom PI7C9X2G404/PI7C9X2G304/PI7C9X2G303 PCIe switches have an
erratum for ACS P2P Request Redirect behaviour when used in the cut-through
forwarding mode. The recommended work around for this issue is to use the
switch in store and forward mode. The erratum results in packets being
queued and not being delivered upstream, which can be observed as very poor
downstream device performance and/or dropped device-generated
data/interrupts.
Add a fixup so that when enabling or resuming the downstream port we check
if it has enabled ACS P2P Request Redirect, and if so, change the device
(via the upstream port) to use the store and forward operating mode.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=177471
Link: https://lore.kernel.org/r/20210910025823.196508-1-nathan@nathanrossi.com
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The pwm_ prefix suggests that pwm_busy_wait() is a function provided by
the pwm core. Use the otherwise consistently used driver prefix for this
function, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
When duty-cycle is at full level (100%), the TCNTn and TCMPn registers
needs to be flushed in order to disable the signal. The PWM manual does
not say anything about this, but states that only clearing the TCON
auto-reload bit should be needed, and this seems to be true when the PWM
duty-cycle is not at full level. This can be observed on an Axis
ARTPEC-8, by running:
echo <period> > pwm/period
echo <period> > pwm/duty_cycle
echo 1 > pwm/enable
echo 0 > pwm/enable
Since the TCNTn and TCMPn registers are activated when enabling the PWM
(setting TCON auto-reload bit), and are not touched when disabling the
PWM, the double buffered auto-reload function seems to be still active.
Lowering duty-cycle, and restoring it again in between the enabling and
disabling, makes the disable work since it triggers a reload of the
TCNTn and TCMPn registers.
Fix this by securing a reload of the TCNTn and TCMPn registers when
disabling the PWM and having a full duty-cycle.
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
This allows to drop the platform_driver's remove function. This is the
only user of driver data so this can go away, too.
Signed-off-by: zhaoxiao <long870912@gmail.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Describe better which driver applies to which SoC, to make configuring
kernel for Samsung SoC easier.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
At least some implementations sleep. So mark pwm_apply_state() with a
might_sleep() to make callers aware. In the worst case this uncovers a
valid atomic user, then we revert this patch and at least gained some more
knowledge and then can work on a concept similar to
gpio_get_value/gpio_get_value_cansleep.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Since commit 52eaba4cedbd ("pwm: atmel: Rework tracking updates pending
in hardware") the driver doesn't make use of mutexes any more, so the
header defining these doesn't need to be included.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Eliminate the following coccicheck warning:
./drivers/net/amt.c:2795:6-9: ERROR: amt is NULL but dereferenced.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Build bot says:
>> drivers/net/ethernet/asix/ax88796c_main.c:1116:34: warning: unused variable 'ax88796c_dt_ids' [-Wunused-const-variable]
static const struct of_device_id ax88796c_dt_ids[] = {
^
The only reference to this array is wrapped in of_match_ptr().
Reported-by: kernel test robot <lkp@intel.com>
Fixes: a97c69ba4f30 ("net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The print function dev_err() is redundant because
platform_get_irq() already prints an error.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 5320918b9a87 ("drm/udl: initial UDL driver (v4)")
Cc: stable@vger.kernel.org # 3.4
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025115353.5089-1-johan@kernel.org
|
|
The octeontx2 pf nic driver failsz to link when the devlink support
is not reachable:
aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_get':
otx2_devlink.c:(.text+0x10): undefined reference to `devlink_priv'
aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_validate':
otx2_devlink.c:(.text+0x50): undefined reference to `devlink_priv'
aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_set':
otx2_devlink.c:(.text+0xd0): undefined reference to `devlink_priv'
aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_devlink_info_get':
otx2_devlink.c:(.text+0x150): undefined reference to `devlink_priv'
This is already selected by the admin function driver, but not the
actual nic, which might be built-in when the af driver is not.
Fixes: 2da489432747 ("octeontx2-pf: devlink params support to set mcam entry count")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid
opencoding it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid
opencoding it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The assignment of err will be overwritten next, so this statement
should be deleted.
The clang_analyzer complains as follows:
drivers/net/ethernet/broadcom/tg3.c:5506:2: warning:
Value stored to 'expected_sg_dig_ctrl' is never read
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: luo penghao <luo.penghao@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When I do fuzz test for bonding device interface, I got the following
use-after-free Calltrace:
==================================================================
BUG: KASAN: use-after-free in bond_enslave+0x1521/0x24f0
Read of size 8 at addr ffff88825bc11c00 by task ifenslave/7365
CPU: 5 PID: 7365 Comm: ifenslave Tainted: G E 5.15.0-rc1+ #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
Call Trace:
dump_stack_lvl+0x6c/0x8b
print_address_description.constprop.0+0x48/0x70
kasan_report.cold+0x82/0xdb
__asan_load8+0x69/0x90
bond_enslave+0x1521/0x24f0
bond_do_ioctl+0x3e0/0x450
dev_ifsioc+0x2ba/0x970
dev_ioctl+0x112/0x710
sock_do_ioctl+0x118/0x1b0
sock_ioctl+0x2e0/0x490
__x64_sys_ioctl+0x118/0x150
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f19159cf577
Code: b3 66 90 48 8b 05 11 89 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 78
RSP: 002b:00007ffeb3083c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffeb3084bca RCX: 00007f19159cf577
RDX: 00007ffeb3083ce0 RSI: 0000000000008990 RDI: 0000000000000003
RBP: 00007ffeb3084bc4 R08: 0000000000000040 R09: 0000000000000000
R10: 00007ffeb3084bc0 R11: 0000000000000246 R12: 00007ffeb3083ce0
R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffeb3083cb0
Allocated by task 7365:
kasan_save_stack+0x23/0x50
__kasan_kmalloc+0x83/0xa0
kmem_cache_alloc_trace+0x22e/0x470
bond_enslave+0x2e1/0x24f0
bond_do_ioctl+0x3e0/0x450
dev_ifsioc+0x2ba/0x970
dev_ioctl+0x112/0x710
sock_do_ioctl+0x118/0x1b0
sock_ioctl+0x2e0/0x490
__x64_sys_ioctl+0x118/0x150
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 7365:
kasan_save_stack+0x23/0x50
kasan_set_track+0x20/0x30
kasan_set_free_info+0x24/0x40
__kasan_slab_free+0xf2/0x130
kfree+0xd1/0x5c0
slave_kobj_release+0x61/0x90
kobject_put+0x102/0x180
bond_sysfs_slave_add+0x7a/0xa0
bond_enslave+0x11b6/0x24f0
bond_do_ioctl+0x3e0/0x450
dev_ifsioc+0x2ba/0x970
dev_ioctl+0x112/0x710
sock_do_ioctl+0x118/0x1b0
sock_ioctl+0x2e0/0x490
__x64_sys_ioctl+0x118/0x150
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Last potentially related work creation:
kasan_save_stack+0x23/0x50
kasan_record_aux_stack+0xb7/0xd0
insert_work+0x43/0x190
__queue_work+0x2e3/0x970
delayed_work_timer_fn+0x3e/0x50
call_timer_fn+0x148/0x470
run_timer_softirq+0x8a8/0xc50
__do_softirq+0x107/0x55f
Second to last potentially related work creation:
kasan_save_stack+0x23/0x50
kasan_record_aux_stack+0xb7/0xd0
insert_work+0x43/0x190
__queue_work+0x2e3/0x970
__queue_delayed_work+0x130/0x180
queue_delayed_work_on+0xa7/0xb0
bond_enslave+0xe25/0x24f0
bond_do_ioctl+0x3e0/0x450
dev_ifsioc+0x2ba/0x970
dev_ioctl+0x112/0x710
sock_do_ioctl+0x118/0x1b0
sock_ioctl+0x2e0/0x490
__x64_sys_ioctl+0x118/0x150
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff88825bc11c00
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 0 bytes inside of
1024-byte region [ffff88825bc11c00, ffff88825bc12000)
The buggy address belongs to the page:
page:ffffea00096f0400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x25bc10
head:ffffea00096f0400 order:3 compound_mapcount:0 compound_pincount:0
flags: 0x57ff00000010200(slab|head|node=1|zone=2|lastcpupid=0x7ff)
raw: 057ff00000010200 ffffea0009a71c08 ffff888240001968 ffff88810004dbc0
raw: 0000000000000000 00000000000a000a 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88825bc11b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88825bc11b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88825bc11c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88825bc11c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88825bc11d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Put new_slave in bond_sysfs_slave_add() will cause use-after-free problems
when new_slave is accessed in the subsequent error handling process. Since
new_slave will be put in the subsequent error handling process, remove the
unnecessary put to fix it.
In addition, when sysfs_create_file() fails, if some files have been crea-
ted successfully, we need to call sysfs_remove_file() to remove them.
Since there are sysfs_create_files() & sysfs_remove_files() can be used,
use these two functions instead.
Fixes: 7afcaec49696 (bonding: use kobject_put instead of _del after kobject_add)
Signed-off-by: Huang Guobin <huangguobin4@huawei.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
