summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-06-10net: mediatek: fix threshold valueJohn Crispin
The logic to calculate the threshold value for stopping the TX queue is bad. Currently it will always use 1/2 of the rings size, which is way too much. Set the threshold to MAX_SKB_FRAGS. This makes sure that the queue is stopped when there is not enough room to accept an additional segment.  Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10net: mediatek: disable all interrupts during probeJohn Crispin
The current code only disables those IRQs that we will later use. To ensure that we have a predefined state, we really want to disable all IRQs. Change the code to disable all IRQs to achieve this. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10net: mediatek: add next data pointer coherency protectionJohn Crispin
The QDMA engine can fail to update the register pointing to the next TX descriptor if this bit does not get set in the QDMA configuration register. Not setting this bit can result in invalid values inside the TX rings registers which will causes TX stalls. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10net: mediatek: dropped rx packets are not being counted properlyJohn Crispin
There are two places inside mtk_poll_rx where rx_dropped is not being incremented properly. Fix this by adding the missing code to increment the counter. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10net: mediatek: invalid buffer lookup in mtk_tx_map()John Crispin
The lookup of the tx_buffer in the error path inside mtk_tx_map() uses the wrong descriptor pointer. This looks like a copy & paste error. Change the code to use the correct pointer. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10net: mediatek: fix missing free of scratch memoryJohn Crispin
Scratch memory gets allocated in mtk_init_fq_dma() but the corresponding code to free it is missing inside mtk_dma_free() causing a memory leak. With this patch applied, we can run ifconfig up/down several thousand times without any problems. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10net: mediatek: add missing return code checkJohn Crispin
The code fails to check if the scratch memory was properly allocated. Add this check and return with an error if the allocation failed. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10Merge tag 'phy-for-4.7-rc' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: phy: for 4.7-rc *) Fix compiler warning in exynos-mipi-video *) Fix in ti-pipe3 PHY to program the DPLL even if it was already locked Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-06-10net: phy: smsc: reintroduced unconditional soft resetManfred Schlaegl
We detected some problems using the smsc lan8720a in combination with i.MX28 and tracked this down to commit 21009686662f ("net: phy: smsc: move smsc_phy_config_init reset part in a soft_reset function") With 2100968666 the generic soft reset is replaced by a specific function which handles power down state correctly. But additionally the soft reset itself got conditional and is therefore also only performed if the phy is in power down state. This patch keeps the conditional wake up from power down, but re-introduces the unconditional soft reset using the generic soft reset function. It was tested on linux-4.1.25 and linux-4.7.0-rc2. Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10mei: don't use wake_up_interruptible for wr_ctrlAlexander Usyskin
wr_ctrl waiters are none interruptible, so should be waken up with call to wake_up and not to wake_up_interruptible. This fixes commit: 7ff4bdd ("mei: fix waiting for wr_ctrl for corner cases.") Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-11Merge tag 'drm-amdkfd-fixes-2016-06-03' of ↵Dave Airlie
git://people.freedesktop.org/~gabbayo/linux into drm-fixes * tag 'drm-amdkfd-fixes-2016-06-03' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: print once about mem_banks truncation drm/amdkfd: destroy dbgmgr in notifier release drm/amdkfd: unbind only existing processes
2016-06-10uvc_v4l2: Simplify compat ioctl implementationAndy Lutomirski
The uvc compat ioctl implementation seems to have copied user data for no good reason. Remove a bunch of copies. Signed-off-by: Andy Lutomirski <luto@kernel.org>
2016-06-10uvc: Forward compat ioctls to their handlers directlyAndy Lutomirski
The current code goes through a lot of indirection just to call a known handler. Simplify it: just call the handlers directly. Cc: stable@vger.kernel.org Signed-off-by: Andy Lutomirski <luto@kernel.org>
2016-06-10Merge tag 'hwmon-for-linus-v4.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - fix regression in fam15h_power driver - minor variable type fix in lm90 driver - document compatible statement for ina2xx driver * tag 'hwmon-for-linus-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (lm90) use proper type for update_interval hwmon: (ina2xx) Document compatible for INA231 hwmon: (fam15h_power) Disable preemption when reading registers
2016-06-10Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "Two fixes: a regression/crash fix, and a message output fix" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/arm: Fix the format of EFI debug messages efi: Fix for_each_efi_memory_desc_in_map() for empty memmaps
2016-06-10Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Ingo Molnar: "Addresses a false positive warning in the GPU/DRM code" [ Technically it's not a "false positive", but it's the virtual GPU interface that needs the frame pointer for its own internal purposes ] * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool, drm/vmwgfx: Fix "duplicate frame pointer save" warning
2016-06-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) nfnetlink timestamp taken from wrong skb, fix from Florian Westphal. 2) Revert some msleep conversions in rtlwifi as these spots are in atomic context, from Larry Finger. 3) Validate that NFTA_SET_TABLE attribute is actually specified when we call nf_tables_getset(). From Phil Turnbull. 4) Don't do mdio_reset in stmmac driver with spinlock held as that can sleep, from Vincent Palatin. 5) sk_filter() does things other than run a BPF filter, so we should not elide it's call just because sk->sk_filter is NULL. Fix from Eric Dumazet. 6) Fix missing backlog updates in several packet schedulers, from Cong Wang. 7) bnx2x driver should allow VLAN add/remove while the interface is down, from Michal Schmidt. 8) Several RDS/TCP race fixes from Sowmini Varadhan. 9) fq_codel scheduler doesn't return correct queue length in dumps, from Eric Dumazet. 10) Fix TCP stats for tail loss probe and early retransmit in ipv6, from Yuchung Cheng. 11) Properly initialize udp_tunnel_socket_cfg in l2tp_tunnel_create(), from Guillaume Nault. 12) qfq scheduler leaks SKBs if a kzalloc fails, fix from Florian Westphal. 13) sock_fprog passed into PACKET_FANOUT_DATA needs compat handling, from Willem de Bruijn. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (85 commits) vmxnet3: segCnt can be 1 for LRO packets packet: compat support for sock_fprog stmmac: fix parameter to dwmac4_set_umac_addr() net/mlx5e: Fix blue flame quota logic net/mlx5e: Use ndo_stop explicitly at shutdown flow net/mlx5: E-Switch, always set mc_promisc for allmulti vports net/mlx5: E-Switch, Modify node guid on vf set MAC net/mlx5: E-Switch, Fix vport enable flow net/mlx5: E-Switch, Use the correct error check on returned pointers net/mlx5: E-Switch, Use the correct free() function net/mlx5: Fix E-Switch flow steering capabilities check net/mlx5: Fix flow steering NIC capabilities check net/mlx5: Fix root flow table update net/mlx5: Fix MLX5_CMD_OP_MAX to be defined correctly net/mlx5: Fix masking of reserved bits in XRCD number net/mlx5: Fix the size of modify QP mailbox mlxsw: spectrum: Don't sleep during ndo_get_phys_port_name() mlxsw: spectrum: Make split flow match firmware requirements wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel cfg80211: remove get/set antenna and tx power warnings ...
2016-06-10Merge tag 'drm-fixes-for-v4.7-rc3' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "This weeks instalment of fixes: amdgpu: Lots of memory leak and firmware leak fixes nouveau: Collection of display fixes, KASAN fixes vc4: vblank/pageflipping fixes fsl-dcu: Regmap cache fix omap: Unused variable warning fix. Nothing too surprising so far" * tag 'drm-fixes-for-v4.7-rc3' of git://people.freedesktop.org/~airlied/linux: (46 commits) drm/amdgpu: fix warning with powerplay disabled. drm/amd/powerplay: delete useless code as pptable changed in vbios. drm/amd/powerplay: fix bug visit array out of bounds drm/amdgpu: fix smu ucode memleak (v2) drm/amdgpu: add release firmware for cgs drm/amdgpu: fix tonga smu_fini mem leak drm/amdgpu: fix fiji smu fini mem leak drm/amdgpu: fix cik sdma ucode memleak drm/amdgpu: fix sdma24 ucode mem leak drm/amdgpu: fix sdma3 ucode mem leak drm/amdgpu: fix uvd fini mem leak drm/amdgpu: fix gfx 7 ucode mem leak drm/amdgpu: fix gfx8 ucode mem leak drm/amdgpu: fix missing free wb for cond_exec drm/amdgpu: fix memleak in pptable_init drm/amdgpu: fix mem leak in atombios drm/amdgpu: fix mem leak in pplib/hwmgr drm/amdgpu: fix mem leak in smumgr drm/amdgpu: add pipeline sync while vmid switch in same ctx drm/amdgpu: vBIOS post only call when mem_size zero ...
2016-06-10Merge tag 'acpi-4.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "A recently introduced boot regression related to the ACPI EC initialization is addressed by restoring the previous behavior (Lv Zheng)" * tag 'acpi-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / EC: Fix a boot EC regresion by restoring boot EC support for the DSDT EC
2016-06-10Merge tag 'pm-4.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Stable-candidate fixes for the intel_pstate driver and the cpuidle core. Specifics: - Fix two intel_pstate initialization issues, one of which was introduced during the 4.4 cycle (Srinivas Pandruvada) - Fix kernel build with CONFIG_UBSAN set and CONFIG_CPU_IDLE unset (Catalin Marinas)" * tag 'pm-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Fix ->set_policy() interface for no_turbo cpufreq: intel_pstate: Fix code ordering in intel_pstate_set_policy() cpuidle: Do not access cpuidle_devices when !CONFIG_CPU_IDLE
2016-06-10pwm: sysfs: Get return value from pwm_apply_state()Ryo Kodama
This patch adds to check the return value from pwm_apply_state() used in enable_store(). The error of enable_store() doesn't work if the return value doesn't received. Signed-off-by: Ryo Kodama <ryo.kodama.vz@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Fixes: 39100ceea79f ("pwm: Switch to the atomic API") Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-06-10pwm: Improve args checking in pwm_apply_state()Brian Norris
It seems like in the process of refactoring pwm_config() to utilize the newly-introduced pwm_apply_state() API, some args/bounds checking was dropped. In particular, I noted that we are now allowing invalid period selections, e.g.: # echo 1 > /sys/class/pwm/pwmchip0/export # cat /sys/class/pwm/pwmchip0/pwm1/period 100 # echo 101 > /sys/class/pwm/pwmchip0/pwm1/duty_cycle [... driver may or may not reject the value, or trigger some logic bug ...] It's better to see: # echo 1 > /sys/class/pwm/pwmchip0/export # cat /sys/class/pwm/pwmchip0/pwm1/period 100 # echo 101 > /sys/class/pwm/pwmchip0/pwm1/duty_cycle -bash: echo: write error: Invalid argument This patch reintroduces some bounds checks in both pwm_config() (for its signed parameters; we don't want to convert negative values into large unsigned values) and in pwm_apply_state() (which fix the above described behavior, as well as other potential API misuses). Fixes: 5ec803edcb70 ("pwm: Add core infrastructure to allow atomic updates") Signed-off-by: Brian Norris <briannorris@chromium.org> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-06-10iwlwifi: mvm: fix a few firmware capability checksJohannes Berg
My cleanup in "iwlwifi: prepare for higher API/CAPA bits" accidentally inverted a few tests - fix them. Fixes: 859d914c8f5c ("iwlwifi: prepare for higher API/CAPA bits") Reported-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-06-10iwlwifi: mvm: set the encryption type of an IGTK keyAyala Beker
The FW expect the driver to set the encryption algorithm type when installing the IGTK key in the HW. Currently when installing CMAC IGTK key we don't set the algorithm type and as a result the FW fails to calculate the MIC of multicast management frames. Fix it. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-06-10iwlwifi: mvm: fix potential NULL-dereference in iwl_mvm_reorder()Luca Coelho
We try to access sta before we check for IS_ERR_OR_NULL(), so we may end up accessing a NULL pointer. To prevent that, move the conversion from sta to mvm_sta below the check. Fixes: b915c10174fb ("iwlwifi: mvm: add reorder buffer per queue") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-06-10iwlwifi: mvm: fix RCU splat in TKIP's update_keyEmmanuel Grumbach
The commit below mistakenly changed an rcu_dereference_check to a rcu_dereference_protected which introduced the following RCU warning: [ INFO: suspicious RCU usage. ] 4.6.0-rc7-next-20160513-dbg-00004-g8de8b92-dirty #655 Not tainted ------------------------------- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h:1069 suspicious rcu_dereference_protected() usage! Call Trace: [<ffffffff8106b836>] lockdep_rcu_suspicious+0xf7/0x100 [<ffffffffa03b2321>] iwl_mvm_get_key_sta.part.0+0x5d/0x80 [iwlmvm] [<ffffffffa03b4acb>] iwl_mvm_update_tkip_key+0xd3/0x162 [iwlmvm] [<ffffffffa03a2b60>] iwl_mvm_mac_update_tkip_key+0x17/0x19 [iwlmvm] [<ffffffffa0329646>] ieee80211_tkip_decrypt_data+0x22c/0x24b [mac80211] [<ffffffffa0318bb1>] ieee80211_crypto_tkip_decrypt+0xc5/0x110 [mac80211] [<ffffffffa033102e>] ieee80211_rx_handlers+0x9bb/0x1fe1 [mac80211] Fixes: 13303c0fb148 ("iwlwifi: mvm: use helpers to get iwl_mvm_sta") Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-06-10iwlwifi: mvm: increase scan timeout to 20 secondsLuca Coelho
The 16 seconds timeout we were using turned out to be too short. Recalculations by system show that the total time in both bands should be < 18.5 seconds, even in the slowest cases (e.g. DCM P2P with DTIM=2). Rounding it up to 20 seconds for a bit more safety. Fixes: 728e825f81b1 ("iwlwifi: mvm: add a scan timeout for regular scans") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-06-10drm/i915: Extract physical display dimensions from VBTVille Syrjälä
The VBT has these mysterious H/V image sizes as part of the display timings. Looking at some dumps those appear to be the physical dimensions in mm. Which makes sense since the timing descriptor matches the format used by EDID detailed timing descriptor, which defines these as "H/V Addressable Video Image Size in mm". So let's use that information from the panel fixed mode to get the physical dimensions for LVDS/eDP/DSI displays. And with that we can fill out the display_info so that userspace can get at it via GetConnector. v2: Use (hi<<8)|lo instead of broken (hi<<4)+lo Handle LVDS and eDP too Cc: Stephen Just <stephenjust@gmail.com> Tested-by: Stephen Just <stephenjust@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96255 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464685714-30507-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com> (cherry picked from commit df457245b5b7515cf97763ebd8975229e34d4cf3) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-06-10drm/i915: Check VBT for port presence in addition to the strap on VLV/CHVVille Syrjälä
Apparently some CHV boards failed to hook up the port presence straps for HDMI ports as well (earlier we assumed this problem only affected eDP ports). So let's check the VBT in addition to the strap, and if either one claims that the port is present go ahead and register the relevant connector. While at it, change port D to register DP before HDMI as we do for ports B and C since commit 457c52d87e5d ("drm/i915: Only ignore eDP ports that are connected") Also print a debug message when we register a HDMI connector to aid in diagnosing missing/incorrect ports. We already had such a print for DP/eDP. v2: Improve the comment in the code a bit, note the port D change in the commit message Cc: Radoslav Duda <radosd@radosd.com> Tested-by: Radoslav Duda <radosd@radosd.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96321 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464945463-14364-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 22f35042593c2b369861f0b9740efb8065a42db0) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-06-10drm/i915: Only ignore eDP ports that are connectedChris Wilson
If the VBT says that a certain port should be eDP (and hence fused off from HDMI), but in reality it isn't, we need to try and acquire the HDMI connection instead. So only trust the VBT edp setting if we can connect to an eDP device on that port. Fixes: d2182a6608 (drm/i915: Don't register HDMI connectors for eDP ports on VLV/CHV) References: https://bugs.freedesktop.org/show_bug.cgi?id=96288 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Phidias Chiang <phidias.chiang@canonical.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464766070-31623-1-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit 457c52d87e5dac9a4cf1a6a287e60ea7645067d4) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-06-10drm/i915: Silence "unexpected child device config size" for VBT on 845gChris Wilson
My old 845g complains that the child_device_size inside its VBT, version 110, is incorrect. Let's fiddle with the version matching such that it works with this VBT (i.e. treat BIOS v110 as having the same size as v108). Fixes [drm:intel_bios_init] *ERROR* Unexpected child device config size 27 (expected 33 for VBT version 110) Whether this is correct, no one knows - but it works for this particular machine. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464800923-6054-1-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit fa05178c5dc3d1a3ad370f101cad01cf9dd3bbf9) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-06-10vmxnet3: segCnt can be 1 for LRO packetsShrikrishna Khare
The device emulation may send segCnt of 1 for LRO packets. Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: Jin Heo <heoj@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09stmmac: fix parameter to dwmac4_set_umac_addr()Ben Dooks
The dwmac4_set_umac_addr() takes a struct mac_device_info as the first parameter, but is being passed a ioaddr instead from dwmac4_set_filter(). Fix the warning/bug by changing the first parameter. drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: warning: incorrect type in argument 1 (different address spaces) drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: expected struct mac_device_info *hw drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: got void [noderef] <asn:2>*ioaddr Note, only compile tested this as do not have any hardware with it in. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10drm/i915: Fix NULL pointer deference when out of PLLs in IVBAnder Conselvan de Oliveira
In commit f9476a6c6d0c ("drm/i915: Refactor platform specifics out of intel_get_shared_dpll()"), the ibx_get_dpll() function lacked an error check, that can lead to a NULL pointer dereference when trying to enable three pipes. BUG: unable to handle kernel NULL pointer dereference at 0000000000000068 IP: [<ffffffffa0482275>] intel_reference_shared_dpll+0x15/0x100 [i915] PGD cec87067 PUD d30ce067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: snd_hda_intel i915 drm_kms_helper drm intel_gtt sch_fq_codel cfg80211 binfmt_misc i2c_algo_bit cfbfillrect syscopyarea cfbimgblt sysfillrect sysimgblt fb_sys_fops cfbcopyarea intel_rapl iosf_mbi x86_pkg_temp_thermal coretemp agpgart kvm_intel snd_hda_codec_hdmi kvm iTCO_wdt snd_hda_codec_realtek snd_hda_codec_generic irqbypass aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd psmouse pcspkr snd_hda_codec i2c_i801 snd_hwdep snd_hda_core snd_pcm snd_timer lpc_ich mfd_core snd soundcore wmi evdev tpm_tis tpm [last unloaded: drm] CPU: 3 PID: 5810 Comm: kms_flip Tainted: G U W 4.6.0-test+ #3 Hardware name: /DZ77BH-55K, BIOS BHZ7710H.86A.0100.2013.0517.0942 05/17/2013 task: ffff8800d3908040 ti: ffff8801166c8000 task.ti: ffff8801166c8000 RIP: 0010:[<ffffffffa0482275>] [<ffffffffa0482275>] intel_reference_shared_dpll+0x15/0x100 [i915] RSP: 0018:ffff8801166cba60 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000002 RDX: 0000000000000001 RSI: ffff8800d07f1bf8 RDI: 0000000000000000 RBP: ffff8801166cba88 R08: 0000000000000002 R09: ffff8800d32e5698 R10: 0000000000000001 R11: ffff8800cc89ac88 R12: ffff8800d07f1bf8 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f4c3fc8d8c0(0000) GS:ffff88011bcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000068 CR3: 00000000d3b4c000 CR4: 00000000001406e0 Stack: 0000000000000000 ffff8800d07f1bf8 0000000000000000 ffff8800d04c0000 0000000000000000 ffff8801166cbaa8 ffffffffa04823a7 ffff8800d07f1bf8 ffff8800d32e5698 ffff8801166cbab8 ffffffffa04840cf ffff8801166cbaf0 Call Trace: [<ffffffffa04823a7>] ibx_get_dpll+0x47/0xa0 [i915] [<ffffffffa04840cf>] intel_get_shared_dpll+0x1f/0x50 [i915] [<ffffffffa046d080>] ironlake_crtc_compute_clock+0x280/0x430 [i915] [<ffffffffa0472ac0>] intel_crtc_atomic_check+0x240/0x320 [i915] [<ffffffffa03da18e>] drm_atomic_helper_check_planes+0x14e/0x1d0 [drm_kms_helper] [<ffffffffa0474a0c>] intel_atomic_check+0x5dc/0x1110 [i915] [<ffffffffa029d3aa>] drm_atomic_check_only+0x14a/0x660 [drm] [<ffffffffa029d086>] ? drm_atomic_set_crtc_for_connector+0x96/0x100 [drm] [<ffffffffa029d8d7>] drm_atomic_commit+0x17/0x60 [drm] [<ffffffffa03dc3b7>] restore_fbdev_mode+0x237/0x260 [drm_kms_helper] [<ffffffffa029c65a>] ? drm_modeset_lock_all_ctx+0x9a/0xb0 [drm] [<ffffffffa03de9b3>] drm_fb_helper_restore_fbdev_mode_unlocked+0x33/0x80 [drm_kms_helper] [<ffffffffa03dea2d>] drm_fb_helper_set_par+0x2d/0x50 [drm_kms_helper] [<ffffffffa03de93a>] drm_fb_helper_hotplug_event+0xaa/0xf0 [drm_kms_helper] [<ffffffffa03de9d6>] drm_fb_helper_restore_fbdev_mode_unlocked+0x56/0x80 [drm_kms_helper] [<ffffffffa0490f72>] intel_fbdev_restore_mode+0x22/0x80 [i915] [<ffffffffa04ba45e>] i915_driver_lastclose+0xe/0x20 [i915] [<ffffffffa02810de>] drm_lastclose+0x2e/0x130 [drm] [<ffffffffa028148c>] drm_release+0x2ac/0x4b0 [drm] [<ffffffff811a6b2d>] __fput+0xed/0x1f0 [<ffffffff811a6c6e>] ____fput+0xe/0x10 [<ffffffff81079156>] task_work_run+0x76/0xb0 [<ffffffff8105aaab>] do_exit+0x3ab/0xc60 [<ffffffff810a145f>] ? trace_hardirqs_on_caller+0x12f/0x1c0 [<ffffffff8105c67e>] do_group_exit+0x4e/0xc0 [<ffffffff8105c704>] SyS_exit_group+0x14/0x20 [<ffffffff8158bb25>] entry_SYSCALL_64_fastpath+0x18/0xa8 Code: 14 80 48 8d 34 90 b8 01 00 00 00 d3 e0 09 04 b3 5b 41 5c 5d c3 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 49 89 fe 41 55 41 54 53 <44> 8b 67 68 48 89 f3 48 8b be 08 02 00 00 4c 8b 2e e8 15 9d fd RIP [<ffffffffa0482275>] intel_reference_shared_dpll+0x15/0x100 [i915] RSP <ffff8801166cba60> CR2: 0000000000000068 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: drm-intel-fixes@lists.freedesktop.org Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: f9476a6c6d0c ("drm/i915: Refactor platform specifics out of intel_get_shared_dpll()") Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463748426-5956-1-git-send-email-ander.conselvan.de.oliveira@intel.com (cherry picked from commit bb143165510661feda06fd99298b8b3a94af3046) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-06-09net/mlx5e: Fix blue flame quota logicEli Cohen
Blue flame is a latency enhancement feature that allows the driver to write the packet data directly to the NIC's registers thus making the read of the packet data from host memory redundant. We maintain a quota for the blue flame which is reloaded whenever we identify that the hardware is processing send requests and processes them fast enough so by the time we post the next send request it was able to process all the pending ones. This indicates that the hardware is capable of processing more blue flame requests efficiently. The blue flame quota is decremented whenever we send using blue flame. The current code erroneously clears the budget if we did not use blue flame for the current post send operation and we fix it here. Fixes: 88a85f99e51f ('net/mlx5e: TX latency optimization to save DMA reads') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09net/mlx5e: Use ndo_stop explicitly at shutdown flowEran Ben Elisha
The current implementation copies the flow of ndo_stop instead of calling it explicitly, Fixed it. Fixes: 5fc7197d3a25 ("net/mlx5: Add pci shutdown callback") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09net/mlx5: E-Switch, always set mc_promisc for allmulti vportsMohamad Haj Yahia
Set the mc_promisc flag also in the case of adding new mc address to existing allmulti vport. Fixes: a35f71f27a61 ('net/mlx5: E-Switch, Implement promiscuous rx modes vf request handling') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09net/mlx5: E-Switch, Modify node guid on vf set MACNoa Osherovich
In RoCE, the RDMA-CM needs the node guid to establish connection between nodes. Today, the node guid exposed to mlx5 Ethernet VFs is zero, therefore RDMA-CM on the VF is broken. Whenever the administrator sets a MAC for a VF, derive the node guid from it and set it as well in the following way: MAC: e4:1d:2d:b3:f4:01 -> node_guid: e4:1d:2d:ff:fe:b3:f4:01 Fixes: 77256579c6b43 ('net/mlx5: E-Switch, Introduce Vport...') Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09net/mlx5: E-Switch, Fix vport enable flowMohamad Haj Yahia
Reorder vport enable flow to mark the vport as enabled before calling the vport change handler which was modified to handle the case for when vport is not enabled. This fixes the case for when the PF netdev is open before sriov is enabled, once sriov is enabled at esw_enable_vport, esw_vport_change_handle_locked didn't read the PF context since it thought the PF vport was not enabled. When we enable the vport, arming for events is not required anymore, since it's done on the vport change handle Fixes: 586cfa7f1d58 ('net/mlx5: E-Switch, Use vport event handler for vport cleanup') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09net/mlx5: E-Switch, Use the correct error check on returned pointersOr Gerlitz
The mlx5 flow-steering API (mlx5_create_flow_table/group/rule) never returns null pointer on error. Even if it was doing that, checking for IS_ERR_OR_NULL(p) and then returning PTR_ERR(p) would have cause bugs, since PTR_ERR(NULL) --> success, crash. To make things more robust and protect against related future bugs, convert all IS_ERR_OR_NULL checks on returned values to IS_ERR. Fixes: 5742df0f7dbe ('net/mlx5: E-Switch, Introduce VST vport ingress/egress ACLs') Fixes: 86d722ad2c3b ('net/mlx5: Use flow steering infrastructure for mlx5_en') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09net/mlx5: E-Switch, Use the correct free() functionOr Gerlitz
We must use kvfree() for something that could have been allocated with vzalloc(), do that. Fixes: 5742df0f7dbe ('net/mlx5: E-Switch, Introduce VST vport ingress/egress ACLs') Fixes: 86d722ad2c3b ('net/mlx5: Use flow steering infrastructure for mlx5_en') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09net/mlx5: Fix E-Switch flow steering capabilities checkMaor Gottlieb
Add missing capabilities check for E-Switch FDB and ACLs flow tables before creating their namespace in flow steering. Fixes: efdc810ba39d ('net/mlx5: Flow steering, Add vport ACL support') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09net/mlx5: Fix flow steering NIC capabilities checkMaor Gottlieb
Flow steering infrastructure is currently used only on link layer ethernet, therefore the driver should initialize the flow steering when the device link layer is ethernet. In addition, add missing capability check before initializing the namespace of NIC RX flow tables. Fixes: 2530236303d9 ('net/mlx5_core: Flow steering tree initialization') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09net/mlx5: Fix root flow table updateMaor Gottlieb
When we destroy the last flow table we need to update the root_ft to NULL. It fixes an issue for when the last flow table is destroyed and recreated again, root_ft pointer will not be updated, as a result traffic will be dropped. Fixes: 2cc43b494a6c ('net/mlx5_core: Managing root flow table') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09net/mlx5: Fix masking of reserved bits in XRCD numberMajd Dibbiny
Mask the reserved bits when reading the number of newly created XRCD. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10Merge branch 'fixes-for-v4.7-rc3' of ↵Dave Airlie
http://git.agner.ch/git/linux-drm-fsl-dcu into drm-fixes * 'fixes-for-v4.7-rc3' of http://git.agner.ch/git/linux-drm-fsl-dcu: drm/fsl-dcu: use flat regmap cache
2016-06-10drm/amdgpu: fix warning with powerplay disabled.Dave Airlie
This just fixes a warning when you disable powerplay. Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-06-09staging: lustre: lnet: Don't access NULL NI on failure pathDoug Oucharek
In kiblnd_passive_connect(), if we are failing the connection attempt because we cannot find a valid NI (we have a NULL NI), we were coring after the "goto fail" because the failure path was assuming non-NULL NI. This patch ensures we don't dereference a NULL NI on that failure path. Signed-off-by: Doug Oucharek <doug.s.oucharek@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8022 Reviewed-on: http://review.whamcloud.com/19614 Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com> Reviewed-by: James Simmons <uja.ornl@yahoo.com> Reviewed-by: Matt Ezell <ezellma@ornl.gov> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-10Merge branch 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Mostly memory leak and firmware leak fixes for amdgpu. A bit bigger than usual since this is several weeks worth of fixes. * 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux: (28 commits) drm/amd/powerplay: delete useless code as pptable changed in vbios. drm/amd/powerplay: fix bug visit array out of bounds drm/amdgpu: fix smu ucode memleak (v2) drm/amdgpu: add release firmware for cgs drm/amdgpu: fix tonga smu_fini mem leak drm/amdgpu: fix fiji smu fini mem leak drm/amdgpu: fix cik sdma ucode memleak drm/amdgpu: fix sdma24 ucode mem leak drm/amdgpu: fix sdma3 ucode mem leak drm/amdgpu: fix uvd fini mem leak drm/amdgpu: fix gfx 7 ucode mem leak drm/amdgpu: fix gfx8 ucode mem leak drm/amdgpu: fix missing free wb for cond_exec drm/amdgpu: fix memleak in pptable_init drm/amdgpu: fix mem leak in atombios drm/amdgpu: fix mem leak in pplib/hwmgr drm/amdgpu: fix mem leak in smumgr drm/amdgpu: add pipeline sync while vmid switch in same ctx drm/amdgpu: vBIOS post only call when mem_size zero drm/amdgpu: modify sdma start sequence ...
2016-06-10Merge branch 'msm-fixes-4.7-rc3' of ↵Dave Airlie
git://people.freedesktop.org/~robclark/linux into drm-fixes * 'msm-fixes-4.7-rc3' of git://people.freedesktop.org/~robclark/linux: drm/msm: fix potential submit error path issue drm/msm: fix some crashes in submit fail path drm/msm: deal with exhausted vmap space better
generated by cgit (git 2.34.1) at 2025-09-13 14:52:47 +0000