summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-10-30qlcnic: updated reset sequenceSony Chacko
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-30qlcnic: reset loopback mode if promiscous mode setting fails.Sucheta Chakraborty
If promiscous mode setting fails, reset loopback mode setting in firmware. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-30qlcnic: skip IDC ack check in fw reset path.Sritej Velaga
In fw reset path, we should consider any change in device state as an ack from the other driver. When that happens, we don't have to wait for an explicit ack. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-29Merge git://github.com/rustyrussell/linuxLinus Torvalds
* git://github.com/rustyrussell/linux: lguest: move process freezing before pending signals check lguest: don't allow KVM-detection cpuid. lguest: Allow running under paravirt-enabled KVM.
2011-10-29Merge branch 'spi/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'spi/next' of git://git.secretlab.ca/git/linux-2.6: drivercore: Add helper macro for platform_driver boilerplate spi: irq: Remove IRQF_DISABLED OMAP: SPI: Fix the trying to free nonexistent resource error spi/spi-ep93xx: add module.h include spi/tegra: fix compilation error in spi-tegra.c spi: spi-dw: fix all sparse warnings spi/spi-pl022: Call pl022_dma_remove(pl022) only if enable_dma is true spi/spi-pl022: calculate_effective_freq() must set rate <= requested rate spi/spi-pl022: Don't allocate more sg than required. spi/spi-pl022: Use GFP_ATOMIC for allocation from tasklet spi/spi-pl022: Resolve formatting issues
2011-10-29Merge branch 'gpio/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6: h8300: Move gpio.h to gpio-internal.h gpio: pl061: add DT binding support gpio: fix build error in include/asm-generic/gpio.h gpiolib: Ensure struct gpio is always defined irq: Add EXPORT_SYMBOL_GPL to function of irq generic-chip gpio-ml-ioh: Use NUMA_NO_NODE not GFP_KERNEL gpio-pch: Use NUMA_NO_NODE not GFP_KERNEL gpio: langwell: ensure alternate function is cleared gpio-pch: Support interrupt function gpio-pch: Save register value in suspend() gpio-pch: modify gpio_nums and mask gpio-pch: support ML7223 IOH n-Bus gpio-pch: add spinlock in suspend/resume processing gpio-pch: Delete invalid "restore" code in suspend() gpio-ml-ioh: Fix suspend/resume issue gpio-ml-ioh: Support interrupt function gpio-ml-ioh: Delete unnecessary code gpio/mxc: add chained_irq_enter/exit() to mx3_gpio_irq_handler() gpio/nomadik: use genirq core to track enablement gpio/nomadik: disable clocks when unused
2011-10-29i2c-s3c2410: Add device tree supportThomas Abraham
Add device tree probe support for Samsung's s3c2410 i2c driver. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-s3c2410: Keep a copy of platform data and use itThomas Abraham
The platform data is copied into driver's private data and the copy is used for all access to the platform data. This simpifies the addition of device tree support for the i2c-s3c2410 driver. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-nomadik: cosmetic coding style correctionsJonas Aaberg
This fixes a number of whitespace and punctuation problems around the Nomadik I2C driver. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-au1550: dev_pm_ops conversionManuel Lauss
use newer dev_pm_ops for PM Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-au1550: increase timeout waiting for master doneManuel Lauss
Double the timeout in the loop which busy-waits for the "master-done" bit to be set. This bit indicates whether an i2c transaction has completed; on the DB1300 and DB1550 boards this timeout is slightly too short and causes transactions to the WM8731 codec to be falsely flagged as failed. The timeout itself is necessary since transactions to non-existant slaves never set this bit in the first place (and cause i2cdetect to hang). With this change the WM8731 codec on the DB1300/DB1550 boards is correctly detected and initialized. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-au1550: remove unused ack_timeoutManuel Lauss
The ack_timeout context member is unused, get rid of it. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-au1550: remove usage of volatile keywordManuel Lauss
Replace the usage of "volatile"s with register accessor functions. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-tegra: __iomem annotation fixOlof Johansson
drivers/i2c/busses/i2c-tegra.c:585:7: warning: incorrect type in assignment (different address spaces) drivers/i2c/busses/i2c-tegra.c:585:7: expected void *base drivers/i2c/busses/i2c-tegra.c:585:7: got void [noderef] <asn:2>* drivers/i2c/busses/i2c-tegra.c:619:16: warning: incorrect type in assignment (different address spaces) drivers/i2c/busses/i2c-tegra.c:619:16: expected void [noderef] <asn:2>*base drivers/i2c/busses/i2c-tegra.c:619:16: got void *base drivers/i2c/busses/i2c-tegra.c:689:10: warning: incorrect type in argument 1 (different address spaces) drivers/i2c/busses/i2c-tegra.c:689:10: expected void volatile [noderef] <asn:2>*addr drivers/i2c/busses/i2c-tegra.c:689:10: got void *base Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by; Stephen Warren <swarren@nvidia.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-eg20t: Add initialize processing in case i2c-error occursTomoya MORINAGA
In case disconnecting physical connection, need to initialize i2c device for retry access. This patch adds initialize process in case bus-idle fails and Lost arbitration. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-eg20t: Fix flag setting issueTomoya MORINAGA
Currently, in case occurring abnormal event, internal flag variable(=pch_event_flag) is not reset. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-eg20t: add stop sequence in case wait-event timeout occursTomoya MORINAGA
add stop sequence in case wait-event timeout in write processing. (read processing already had it) Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-eg20t: Separate error processingTomoya MORINAGA
Error processing for NACK or wait-event must be precessed separately. So divide wait-event error processing into NACK-receiving and timeout. Add arbitration lost processing. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-eg20t: Fix 10bit access issueTomoya MORINAGA
Reported-by: Jeffrey (Sheng-Hui) Chu <jeffchu@broadcom.com> Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-eg20t: Modify returned value s32 to longTomoya MORINAGA
Type of wait_event_timeout is long not s32. This patch replaces s32 with long. Additionally, delete negative processing(ret < 0). Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-eg20t: Fix bus-idle waiting issueTomoya MORINAGA
Currently, when checking whether bus is idle or not, if timeout occurs, this function always returns success(zero). This patch fixes the issue. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: Fix PCI core warning on suspend/resumeOctavian Purdila
PCI core warns if the legacy PM and new PM functions are present. Update the driver to only use the new power management framework. This patch fixes the following warning seen during suspend/resume: <7>[ 24.193850] i2c-designware-pci 0000:08:13.0: suspend <4>[ 24.193866] ------------[ cut here ]------------ <4>[ 24.193892] WARNING: at drivers/pci/pci-driver.c:605 pci_has_legacy_pm_support+0x48/0x4d() <4>[ 24.193925] Hardware name: OakTrail <4>[ 24.193936] Modules linked in: <4>[ 24.193958] Pid: 2834, comm: kworker/u:22 Tainted: G W 2.6.36greenridge-01402-gc8047e6 #171 <4>[ 24.193974] Call Trace: <4>[ 24.193999] [<c1033a93>] warn_slowpath_common+0x66/0xc2 <4>[ 24.194025] [<c1164143>] ? pci_has_legacy_pm_support+0x48/0x4d <4>[ 24.194052] [<c1033afe>] warn_slowpath_null+0xf/0x13 <4>[ 24.194079] [<c1164143>] pci_has_legacy_pm_support+0x48/0x4d <4>[ 24.194106] [<c11643ff>] pci_pm_suspend+0x22/0x154 <4>[ 24.194131] [<c11643dd>] ? pci_pm_suspend+0x0/0x154 <4>[ 24.194156] [<c11e8a7a>] pm_op+0x3e/0x95 <4>[ 24.194182] [<c11e931d>] __device_suspend+0x12e/0x194 <4>[ 24.194208] [<c11e974d>] ? dpm_drv_timeout+0x0/0x47 <4>[ 24.194237] [<c11e9729>] async_suspend+0x16/0x3a <4>[ 24.194265] [<c104de8e>] async_run_entry_fn+0x97/0x135 <4>[ 24.194291] [<c1043c34>] process_one_work+0x1c9/0x2db Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: Add runtime power management supportDirk Brandewie
Add runtime power management to the PCI driver. Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: Add support for Designware core behind PCI devices.Dirk Brandewie
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: Push all register reads/writes into the core code.Dirk Brandewie
Move all register manipulation code into the core, also move register offset definitions to i2c-designware-core.c since the bus specific portions of the driver no longer need/use them. Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: Support multiple cores using same ISRDirk Brandewie
Add check to make sure that the core is enabled and has outstanding interrupts. The activity bit is masked due to the fact that it will stay active even after the controller has been disabled until the contoller internal state machines have settled. Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: move controller config to bus specific portion of driverDirk Brandewie
With multiple I2C adapters possible in the system each running at (possibly) different speeds we need to move the controller configuration bit field to the adapter. Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: move i2c functionality bit field to be adapter specificDirk Brandewie
The functionality of the adapter depends on the configuration of the IP block at silicon compile time and is adapter specific. Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: Move retriveving the clock speed out of core code.Dirk Brandewie
The clock frequecy supplied to the IP core is specific to a single instance of the driver. This patch makes it possible to have multiple Designware I2C cores in the system possibly running at different core frequencies. Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: split of i2c-designware.c into core and bus specific partsDirk Brandewie
This patch splits i2c-designware.c into three pieces: i2c-designware-core.c, contains the code that interacts directly with the core. i2c-designware-platdrv.c, contains the code specific to the platform driver using the core. i2c-designware-core.h contains the definitions and declareations shared by i2c-designware-core.c and i2c-designware-platdrv.c. This patch is the first in a set to allow multiple instances of the designware I2C core in the system. Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: Move checking of IP core version to i2c_dw_init()Dirk Brandewie
Move checking IP core version to i2c_dw_init() in preparation for splitting i2c-designware.c into core and bus specific portions. Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: Allow mixed endianness accessesJean-Hugues Deschenes
Allows CPUs of a given endianness to access a dw controller of a different endianness. Endianncess difference is detected at run time through the dw component type register. Signed-off-by: Jean-Hugues Deschenes <jean-hugues.deschenes@octasic.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: Check component type registerJean-Hugues Deschenes
Designware component type register is checked before attaching to the device. Signed-off-by: Jean-Hugues Deschenes <jean-hugues.deschenes@octasic.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: Use local version of readl & writelJean-Hugues Deschenes
Use local versions of readl & writel, so per-access manipulations may be performed Signed-off-by: Jean-Hugues Deschenes <jean-hugues.deschenes@octasic.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c: irq: Remove IRQF_DISABLEDYong Zhang
Since commit [c58543c8: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29I2C: OMAP: remove dev->idle, use usage counting provided by runtime PMKevin Hilman
Current usage of runtime PM is not quite correct. The actual idle/unidle of the I2C hardware should not happen until the runtime PM callbacks are called. Therefore, change omap_i2c_[un]idle() functions to only be called from the runtime PM callbacks (when usage count transitions to/from zero.) Also, the runtime PM core does usage counting and replaces functionality currently managed by the dev->idle flag. Remove usage of dev->idle in favor of using runtime PM, and checking status using pm_runtime_suspended(). Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-29I2C: OMAP: remove unneccesary use of pdevKevin Hilman
A pointer to the struct device associated with the i2c device is already kept in the struct omap_i2c_dev, so use omap_i2c_device to find the pointer to struct device. Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-29OMAP4: I2C: Enable the wakeup in I2C_WEShubhrajyoti D
Currently for OMAP4 the I2C_WE is not programmed. This patch enables the programming for OMAP4. This patch fixes a bad conflict resolution. This effectively restores the following commit Commit 120bdaa47[i2c-omap: Program I2C_WE on OMAP4 to enable i2c wakeup] which got changed by Commit a3a7acbc[I2C: OMAP2+: address confused probed version naming] Reviewed-by: Felipe Balbi <balbi@ti.com> Reported-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-29I2C: OMAP1/OMAP2+: prepend I2C IP version to probed version shown in dev_infoAndy Green
The IP version is prepended to the existing printed probed version as an "epoch" version. Cc: patches@linaro.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-29I2C: OMAP2+: Convert omap I2C driver to use feature implementation flags ↵Andy Green
from platform data This patch eliminates all cpu_...() tests from the OMAP I2C driver. Instead, it uses the functionality flags in the platform data to make the decisions about product variations the driver needs to handle. Cc: patches@linaro.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-29I2C: OMAP2+: address confused probed version namingAndy Green
The driver reflects the confusion that probed I2C revision from the hardware of 0x40 means it is on an OMAP4430. However, you will probe the same 0x40 ID on an OMAP3530. So this patch changes the name to reflect that. It also clarifies that the original name OMAP_I2C_REV_2 is referring to some ancient OMAP1 revision number, not to be confused with the IP revisions this patch series introduces. Similarly the term "rev" is used in the ancient OMAP1 ISR, the term is changed to use omap1 instead. Cc: patches@linaro.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-29I2C: OMAP2+: Solve array bounds overflow error on i2c idleAndy Green
This solves the main problem the patch series is about. Prior to this patch on OMAP3530 the driver wrongly interprets the I2C peripheral unit's own reported revision as meaning it is running on an IP V2 device and must use the extended registers. In fact OMAP3530 is IP V1 with the smaller register set, the reason for the confusion is that the hardware does in fact report having the same IP revision index as is found on an OMAP4430, which really is IP V2 and has the extended registers. This corrects the test for which registers to use so that it decides using hwmod knowledge found in the platform_data. Cc: patches@linaro.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-29I2C: OMAP2+: use platform_data ip revision to select register mapAndy Green
Change the register map names to reflect the IP revision they are representing, and use the platform_data IP revision index to select between them at init time. Eliminates 1 of 17 cpu_...() calls in the driver. Cc: patches@linaro.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-29I2C: OMAP2+: Name registers in I2C IP V2 only accordinglyAndy Green
The OMAP I2C driver dynamically chooses between two register sets of differing sizes depending on the cpu type it finds itself on. It has been observed that the existing code references non-existing registers on OMAP3530, because while it correctly chose the smaller register layout based on cpu type, the code uses the probed register ID to decide if to execute code referencing an extra register, and both register layout devices on OMAP3530 and OMAP4430 report the same probed ID of 0x40. This patch changes the extended register names only found on IP V2 of the I2C peripheral unit accordingly to help show up errors in usage. Cc: patches@linaro.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits) [SCSI] qla4xxx: export address/port of connection (fix udev disk names) [SCSI] ipr: Fix BUG on adapter dump timeout [SCSI] megaraid_sas: Fix instance access in megasas_reset_timer [SCSI] hpsa: change confusing message to be more clear [SCSI] iscsi class: fix vlan configuration [SCSI] qla4xxx: fix data alignment and use nl helpers [SCSI] iscsi class: fix link local mispelling [SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA [SCSI] aacraid: use lower snprintf() limit [SCSI] lpfc 8.3.27: Change driver version to 8.3.27 [SCSI] lpfc 8.3.27: T10 additions for SLI4 [SCSI] lpfc 8.3.27: Fix queue allocation failure recovery [SCSI] lpfc 8.3.27: Change algorithm for getting physical port name [SCSI] lpfc 8.3.27: Changed worst case mailbox timeout [SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes [SCSI] megaraid_sas: Changelog and version update [SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic [SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support [SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers [SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts ...
2011-10-28Merge branch 'for-linus' of git://ceph.newdream.net/git/ceph-clientLinus Torvalds
* 'for-linus' of git://ceph.newdream.net/git/ceph-client: libceph: fix double-free of page vector ceph: fix 32-bit ino numbers libceph: force resend of osd requests if we skip an osdmap ceph: use kernel DNS resolver ceph: fix ceph_monc_init memory leak ceph: let the set_layout ioctl set single traits Revert "ceph: don't truncate dirty pages in invalidate work thread" ceph: replace leading spaces with tabs libceph: warn on msg allocation failures libceph: don't complain on msgpool alloc failures libceph: always preallocate mon connection libceph: create messenger with client ceph: document ioctls ceph: implement (optional) max read size ceph: rename rsize -> rasize ceph: make readpages fully async
2011-10-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (549 commits) ALSA: hda - Fix ADC input-amp handling for Cx20549 codec ALSA: hda - Keep EAPD turned on for old Conexant chips ALSA: hda/realtek - Fix missing volume controls with ALC260 ASoC: wm8940: Properly set codec->dapm.bias_level ALSA: hda - Fix pin-config for ASUS W90V ALSA: hda - Fix surround/CLFE headphone and speaker pins order ALSA: hda - Fix typo ALSA: Update the sound git tree URL ALSA: HDA: Add new revision for ALC662 ASoC: max98095: Convert codec->hw_write to snd_soc_write ASoC: keep pointer to resource so it can be freed ASoC: sgtl5000: Fix wrong mask in some snd_soc_update_bits calls ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2 ASoC: da7210: Add support for line out and DAC ASoC: da7210: Add support for DAPM ALSA: hda/realtek - Fix DAC assignments of multiple speakers ASoC: Use SGTL5000_LINREG_VDDD_MASK instead of hardcoded mask value ASoC: Set sgtl5000->ldo in ldo_regulator_register ASoC: wm8996: Use SND_SOC_DAPM_AIF_OUT for AIF2 Capture ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture ...
2011-10-28Merge branch 'next-rebase' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci * 'next-rebase' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: PCI: Clean-up MPS debug output pci: Clamp pcie_set_readrq() when using "performance" settings PCI: enable MPS "performance" setting to properly handle bridge MPS PCI: Workaround for Intel MPS errata PCI: Add support for PASID capability PCI: Add implementation for PRI capability PCI: Export ATS functions to modules PCI: Move ATS implementation into own file PCI / PM: Remove unnecessary error variable from acpi_dev_run_wake() PCI hotplug: acpiphp: Prevent deadlock on PCI-to-PCI bridge remove PCI / PM: Extend PME polling to all PCI devices PCI quirk: mmc: Always check for lower base frequency quirk for Ricoh 1180:e823 PCI: Make pci_setup_bridge() non-static for use by arch code x86: constify PCI raw ops structures PCI: Add quirk for known incorrect MPSS PCI: Add Solarflare vendor ID and SFC4000 device IDs
2011-10-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (83 commits) mmc: fix compile error when CONFIG_BLOCK is not enabled mmc: core: Cleanup eMMC4.5 conditionals mmc: omap_hsmmc: if multiblock reads are broken, disable them mmc: core: add workaround for controllers with broken multiblock reads mmc: core: Prevent too long response times for suspend mmc: recognise SDIO cards with SDIO_CCCR_REV 3.00 mmc: sd: Handle SD3.0 cards not supporting UHS-I bus speed mode mmc: core: support HPI send command mmc: core: Add cache control for eMMC4.5 device mmc: core: Modify the timeout value for writing power class mmc: core: new discard feature support at eMMC v4.5 mmc: core: mmc sanitize feature support for v4.5 mmc: dw_mmc: modify DATA register offset mmc: sdhci-pci: add flag for devices that can support runtime PM mmc: omap_hsmmc: ensure pbias configuration is always done mmc: core: Add Power Off Notify Feature eMMC 4.5 mmc: sdhci-s3c: fix potential NULL dereference mmc: replace printk with appropriate display macro mmc: core: Add default timeout value for CMD6 mmc: sdhci-pci: add runtime pm support ...
2011-10-28i825xx: Fix incorrect dependency for BVME6000_NETGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 14:49:30 +0000