| Age | Commit message (Collapse) | Author |
|---|
|
Mesa changed its clear color alignment from 4k to 64 bytes
without informing the kernel side about the change. This
is now likely to cause framebuffer creation to fail.
The only thing we do with the clear color buffer in i915 is:
1. map a single page
2. read out bytes 16-23 from said page
3. unmap the page
So the only requirement we really have is that those 8 bytes
are all contained within one page. Thus we can deal with the
Mesa regression by reducing the alignment requiment from 4k
to the same 64 bytes in the kernel. We could even go as low as
32 bytes, but IIRC 64 bytes is the hardware requirement on
the 3D engine side so matching that seems sensible.
Note that the Mesa alignment chages were partially undone
so the regression itself was already fixed on userspace
side.
Cc: stable@vger.kernel.org
Cc: Sagar Ghuge <sagar.ghuge@intel.com>
Cc: Nanley Chery <nanley.g.chery@intel.com>
Reported-by: Xi Ruoyao <xry111@xry111.site>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13057
Closes: https://lore.kernel.org/all/45a5bba8de009347262d86a4acb27169d9ae0d9f.camel@xry111.site/
Link: https://gitlab.freedesktop.org/mesa/mesa/-/commit/17f97a69c13832a6c1b0b3aad45b06f07d4b852f
Link: https://gitlab.freedesktop.org/mesa/mesa/-/commit/888f63cf1baf34bc95e847a30a041dc7798edddb
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129065014.8363-2-ville.syrjala@linux.intel.com
Tested-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit ed3a892e5e3d6b3f6eeb76db7c92a968aeb52f3d)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
A build with W=1 fails because there are code and data that are not
needed or used when CONFIG_EFI is not set. Move the "#ifdef CONFIG_EFI"
block to earlier in the source file so that the unused code/data are
not built.
drivers/firmware/efi/sysfb_efi.c:345:39: warning: ‘efifb_fwnode_ops’ defined but not used [-Wunused-const-variable=]
345 | static const struct fwnode_operations efifb_fwnode_ops = {
| ^~~~~~~~~~~~~~~~
drivers/firmware/efi/sysfb_efi.c:238:35: warning: ‘efifb_dmi_swap_width_height’ defined but not used [-Wunused-const-variable=]
238 | static const struct dmi_system_id efifb_dmi_swap_width_height[] __initconst = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/firmware/efi/sysfb_efi.c:188:35: warning: ‘efifb_dmi_system_table’ defined but not used [-Wunused-const-variable=]
188 | static const struct dmi_system_id efifb_dmi_system_table[] __initconst = {
| ^~~~~~~~~~~~~~~~~~~~~~
Fixes: 15d27b15de96 ("efi: sysfb_efi: fix build when EFI is not set")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501071933.20nlmJJt-lkp@intel.com/
Cc: David Rheinsberg <david@readahead.eu>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: linux-fbdev@vger.kernel.org
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Annotate some local buffer allocations as __free(efi_pool) and simplify
the associated error handling accordingly. This removes a couple of
gotos and simplifies the code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The EFI stub may obtain the memory map from the firmware numerous times,
and this involves doing a EFI pool allocation first, which needs to be
freed after use.
Streamline this using a cleanup helper, which makes the code easier to
follow.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Use LocateHandleBuffer() and a __free() cleanup helper to simplify the
PCI I/O handle buffer traversal code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The EFI stub implements various ways of setting the resolution of the
EFI framebuffer at boot, and this duplicates a lot of boilerplate for
iterating over the supported modes and extracting the resolution and
color depth.
Refactor this into a single helper that takes a callback, and use it for
the 'auto', 'list' and 'res' selection methods.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Use the LocateHandleBuffer() API and a __free() function to simplify the
logic that allocates a handle buffer to iterate over all GOP protocols
in the EFI database.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Tweak the for_each_efi_handle() macro in order to avoid the need on the
part of the caller to provide a loop counter variable.
Also move efi_get_handle_num() to the callers, so that each occurrence
can be replaced with the actual number returned by the simplified
LocateHandleBuffer API.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
UGA is the EFI graphical output protocol that preceded GOP, and has been
long obsolete. Drop support for it from the x86 implementation of the
EFI stub - other architectures never bothered to implement it (save for
ia64)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The early_ioremap interface can fail and return NULL in certain cases. To
prevent NULL-pointer dereference crashes, fixed issues in the acpi_extlog
and copy_early_mem interfaces, improving robustness when handling early
memory.
Link: https://lkml.kernel.org/r/20241212101004.1544070-1-guoweikang.kernel@gmail.com
Signed-off-by: Guo Weikang <guoweikang.kernel@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Julian Stecklina <julian.stecklina@cyberus-technology.de>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The omap driver was using struct scatter_walk, but only to maintain an
offset, rather than iterating through the virtual addresses of the data
contained in the scatterlist which is what scatter_walk is intended for.
Make it just use a plain offset instead. This is simpler and avoids
using struct scatter_walk in a way that is not well supported.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
spum_cipher_req_init() assigns 'spu_hdr' to local 'ptr' variable and
later increments 'ptr' over specific fields like it was meant to point
to pieces of message for some purpose. However the code does not read
'ptr' at all thus this entire iteration over 'spu_hdr' seams pointless.
Reported by clang W=1 build:
drivers/crypto/bcm/spu.c:839:6: error: variable 'ptr' set but not used [-Werror,-Wunused-but-set-variable]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
On the HiSilicon accelerators drivers, the PF/VFs driver can send messages
to the VFs/PF by writing hardware registers, and the VFs/PF driver receives
messages from the PF/VFs by reading hardware registers. To support this
feature, a new version id is added, different communication mechanism are
used based on different version id.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The temperature sensor is actually part of the integrated PHY and available
also on the standalone versions of the PHY. Therefore hwmon support will
be added to the Realtek PHY driver and can be removed here.
Fixes: 1ffcc8d41306 ("r8169: add support for the temperature sensor being available from RTL8125B")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/afba85f5-987b-4449-83cc-350438af7fe7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch is the second part of update flow implementation.
Instead of using two action RTCs, we use the same RTC which is twice
the size of what was required before the update flow support.
This way we always allocate STEs from the same RTC (same pool),
which means that update is done similar to how create is done.
The bigger size allows us to allocate and write new STEs, and
later free the old (pre-update) STEs.
Similar to rule creation, STEs are written in reverse order:
- write action STEs, while match STE is still pointing to
the old action STEs
- overwrite the match STE with the new one, which now
is pointing to the new action STEs
Old action STEs can be freed only once we got completion on the
writing of the new match STE. To implement this we added new rule
states: UPDATING/UPDATED. Rule is moved to UPDATING state in the
beginning of the update flow. Once all completions are received,
rule is moved to UPDATED state. At this point old action STEs are
freed and rule goes back to CREATED state.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-16-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch is the first part of update flow implementation.
Update flow should support rules with single STE (match STE only),
as well as rules with multiple STEs (match STE plus action STEs).
Supporting the rules with single STE is straightforward: we just
overwrite the STE, which is an atomic operation.
Supporting the rules with action STEs is a more complicated case.
The existing implementation uses two action RTCs per matcher and
alternates between the two for each update request.
This implementation was unnecessarily complex and lead to some
unhandled edge cases, so the support for rule update with multiple
STEs wasn't really functional.
This patch removes this code, and the next patch adds implementation
of a different approach.
Note that after applying this patch and before applying the next
patch we still have support for update rule with single STE (only
match STE w/o action STEs), but update will fail for rules with
action STEs.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-15-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add HW Steering mode to mlx5 devlink param of steering mode options.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-14-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add API function get capabilities to HW Steering flow commands.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-13-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently HW Steering does not support the API functions of create and
destroy match definer. Return not supported error in case requested.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-12-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for HW Steering action of vport destination. Add dest vport
actions cache. Hold action in cache per vport / vport and vhca_id. Add
action to cache on demand and remove on namespace closure to reduce
actions creation and destroy.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-11-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add create, destroy and update fte API functions for adding, removing
and updating flow steering rules in HW Steering mode. Get HWS actions
according to required rule, use actions from pool whenever possible.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-10-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add cache of destination flow table HWS action per HWS table. For each
flow table created cache a destination action towards this table. The
cached action will be used on the downstream patch whenever a rule
requires such action.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Multiple flow counters can utilize a single Hardware Steering (HWS)
action for Hardware Steering rules. Given that these counter bulks are
not exclusively created for Hardware Steering, but also serve purposes
such as statistics gathering and other steering modes, it's more
efficient to create the HWS action only when it's first needed by a
Hardware Steering rule. This approach allows for better resource
management through the use of a reference count, rather than
automatically creating an HWS action for every bulk of flow counters.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add modify header alloc and dealloc API functions to provide modify
header actions for steering rules. Use fs hws pools to get actions from
shared bulks of modify header actions.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add packet reformat alloc and dealloc API functions to provide packet
reformat actions for steering rules.
Add HWS action pools for each of the following packet reformat types:
- decapl3: decapsulate l3 tunnel to l2
- encapl2: encapsulate l2 to tunnel l2
- encapl3: encapsulate l2 to tunnel l3
- insert_hdr: insert header
In addition cache remove header action for remove vlan header as this is
currently the only use case of remove header action in the driver.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The HW Steering actions pool will help utilize the option in HW Steering
to share steering actions among different rules.
Create pool on root namespace creation and add few HW Steering actions
that don't depend on the steering rule itself and thus can be shared
between rules, created on same namespace: tag, pop_vlan, push_vlan,
drop, decap l2.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add API functions to create and destroy HW Steering flow groups. Each
flow group consists of a Backward Compatible (BWC) HW Steering matcher
which holds the flow group match criteria.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add API functions to create, modify and destroy HW Steering flow tables.
Modify table enables change, connect or disconnect default miss table.
Add update root flow table API function.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add flow steering commands structure for HW steering. Implement create,
destroy and set peer HW steering root namespace functions.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
iavf uses the netdev->lock already to protect shapers.
In an upcoming series we'll try to protect NAPI instances
with netdev->lock.
We need to modify the protection a bit. All NAPI related
calls in the driver need to be consistently under the lock.
This will allow us to easily switch to a "we already hold
the lock" NAPI API later.
register_netdevice(), OTOH, must not be called under
the netdev_lock() as we do not intend to have an
"already locked" version of this call.
Link: https://patch.msgid.link/20250111071339.3709071-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I don't see any reason why napi_enable() needs to be under the lock,
only reason I could think of is if the IRQ also took this lock
but it doesn't. napi_enable() will soon need to sleep.
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Francois Romieu <romieu@fr.zoreil.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250111024742.3680902-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less error prone than the
use of #ifdef based kernel configuration guards.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Link: https://patch.msgid.link/20250109155842.60798-1-rgallaispou@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based
on the alias from of_device_id table.
Link: https://lore.kernel.org/r/20240903132311.961646-1-liaochen4@huawei.com
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
|
|
The use of of_property_read_bool() for non-boolean properties is
deprecated. The primary use of it was to test property presence, but
that has been replaced in favor of of_property_present(). With those
uses now fixed, add a warning to discourage new ones.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20250109-dt-type-warnings-v1-2-0150e32e716c@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The fwnode/device property API currently implement
(fwnode|device)_property_read_bool() with (fwnode|device)_property_present().
That does not allow having different behavior depending on the backend.
Specifically, the usage of (fwnode|device)_property_read_bool() on
non-boolean properties is deprecated on DT. In order to add a warning
on this deprecated use, these 2 APIs need separate ops for the backend.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250109-dt-type-warnings-v1-1-0150e32e716c@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
early_init_fdt_scan_reserved_mem() invoks fdt_get_mem_rsv(), and it will
use uninitialized variables @base and @size once the callee suffers error.
Fix by checking fdt_get_mem_rsv() error as other callers do.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250109-of_core_fix-v4-13-db8a72415b8c@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
__reserved_mem_alloc_size()
The assignment '@base = 0' in __reserved_mem_alloc_size() is meaningless
since @base was already initialized to 0.
Move the assignment to effective and proper place.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250109-of_core_fix-v4-12-db8a72415b8c@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
early_init_dt_alloc_reserved_memory_arch() will free address @base when
suffers memblock_mark_nomap() error, but it still makes kmemleak ignore
the freed address @base via kmemleak_ignore_phys().
That is unnecessary, besides, also causes unnecessary warning messages:
kmemleak_ignore_phys()
-> make_black_object()
-> paint_ptr()
-> kmemleak_warn() // warning message here.
Fix by avoiding kmemleak_ignore_phys() when suffer the error.
Fixes: 658aafc8139c ("memblock: exclude MEMBLOCK_NOMAP regions from kmemleak")
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250109-of_core_fix-v4-10-db8a72415b8c@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
According to DT spec, size of property 'alignment' is based on parent
node’s #size-cells property.
But __reserved_mem_alloc_size() wrongly uses @dt_root_addr_cells to get
the property obviously.
Fix by using @dt_root_size_cells instead of @dt_root_addr_cells.
Fixes: 3f0c82066448 ("drivers: of: add initialization code for dynamic reserved memory")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250109-of_core_fix-v4-9-db8a72415b8c@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add clock for eMMC for EN7581. This is used to give info of the current
eMMC source clock and to switch it from 200MHz or 150MHz.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20250113231030.6735-5-ansuelsmth@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Airoha EN7581 SoC have additional clock compared to EN7523 but current
driver permits to only support up to EN7523 clock numbers.
To handle this, rework the clock handling and permit to declare the
clocks number in match_data and alloca clk_data based on the compatible
match_data.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20250113231030.6735-2-ansuelsmth@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
hpet_rtc_dropped_irq() has been unused since
commit f52ef24be21a ("rtc/alpha: remove legacy rtc driver")
Remove it in rtc, and x86 hpet code.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241215022356.181625-1-linux@treblig.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
cpu2vp_clk is a gate but was mistakenly in th1520_div_clks[] instead
of th1520_gate_clks[].
Fixes: ae81b69fd2b1 ("clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks")
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/r/20241228034802.1573554-1-dfustini@tenstorrent.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add the CLK_IGNORE_UNUSED flag to apb_pclk, cpu2peri_x2h_clk,
perisys_apb2_hclk and perisys_apb3_hclk.
Without this flag, the boot hangs after "clk: Disabling unused clocks"
unless clk_ignore_unused is in the kernel cmdline.
Fixes: ae81b69fd2b1 ("clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks")
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/r/20250113-th1520-clk_ignore_unused-v1-2-0b08fb813438@tenstorrent.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Modify the call to devm_clk_hw_register_gate_parent_data() to actually
pass the clk flags from hw.init instead of just 0. This is necessary to
allow individual clk gates to specify their own clk flags.
Fixes: ae81b69fd2b1 ("clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks")
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/r/20250113-th1520-clk_ignore_unused-v1-1-0b08fb813438@tenstorrent.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Ralink SoC RT3883 has already 'xtal' defined as a base clock so there is no
need to redefine it again in fixed clocks section. Hence, remove the duplicate
one from there.
Fixes: d34db686a3d7 ("clk: ralink: mtmips: fix clocks probe order in oldest ralink SoCs")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20250108093636.265033-1-sergio.paracuellos@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Don't populate the const read-only arrays on the stack at run time,
instead make them static.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20250112213947.8524-1-colin.i.king@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Don't populate the read-only const arrays pll2_p and dclk_div_adj
on the stack at run time, instead make them static.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240912134707.590224-1-colin.i.king@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Currently, the driver acquires clocks and prepare/enable/disable/unprepare
the clocks individually thereby making the driver complex to read.
The driver can be simplified by using the clk_bulk*() APIs.
Use:
- devm_clk_bulk_get_all() API to acquire all the clocks
- clk_bulk_prepare_enable() to prepare/enable clocks
- clk_bulk_disable_unprepare() APIs to disable/unprepare them in bulk
Link: https://lore.kernel.org/r/20241202151150.7393-2-linux.amoon@gmail.com
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
[bhelgaas: squash error handling fix from https://lore.kernel.org/r/20250106153041.55267-1-linux.amoon@gmail.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
When compiling the Rockchip endpoint driver with -W=1, the following
warnings can be seen in the output:
drivers/pci/controller/pcie-rockchip-ep.c:59: warning: Function parameter or struct member 'perst_irq' not described in 'rockchip_pcie_ep'
drivers/pci/controller/pcie-rockchip-ep.c:59: warning: Function parameter or struct member 'perst_asserted' not described in 'rockchip_pcie_ep'
drivers/pci/controller/pcie-rockchip-ep.c:59: warning: Function parameter or struct member 'link_up' not described in 'rockchip_pcie_ep'
drivers/pci/controller/pcie-rockchip-ep.c:59: warning: Function parameter or struct member 'link_training' not described in 'rockchip_pcie_ep'
Fix these warnings by adding the missing field descriptions in
struct rockchip_pcie_ep kernel-doc comment.
Fixes: a7137cbf6bd5 ("PCI: rockchip-ep: Handle PERST# signal in EP mode")
Fixes: bd6e61df4b2e ("PCI: rockchip-ep: Improve link training")
Link: https://lore.kernel.org/r/20241216133404.540736-1-dlemoal@kernel.org
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
