summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-08-25drivers/dma/dma-jz4780: Fix race condition between probe and irq handlerMadhuparna Bhowmik
In probe, IRQ is requested before zchan->id is initialized which can be read in the irq handler. Hence, shift request irq after other initializations complete. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200821034423.12713-1-madhuparnabhowmik10@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-25dmaengine: dw-edma: Fix scatter-gather address calculationGustavo Pimentel
Fix the source and destination physical address calculation of a peripheral device on scatter-gather implementation. This issue manifested during tests using a 64 bits architecture system. The abnormal behavior wasn't visible before due to all previous tests were done using 32 bits architecture system, that masked his effect. Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver") Cc: stable@vger.kernel.org Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Link: https://lore.kernel.org/r/8d3ab7e2ba96563fe3495b32f60077fffb85307d.1597327623.git.gustavo.pimentel@synopsys.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-25dmaengine: ti: k3-udma: Fix the TR initialization for prep_slave_sgPeter Ujfalusi
The TR which needs to be initialized for the next sg entry is indexed by tr_idx and not by the running i counter. In case any sub element in the SG needs more than one TR, the code would corrupt an already configured TR. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200824120108.9178-1-peter.ujfalusi@ti.com Fixes: 6cf668a4ef829 ("dmaengine: ti: k3-udma: Use the TR counter helper for slave_sg and cyclic") Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-25dmaengine: pl330: Fix burst length if burst size is smaller than bus widthMarek Szyprowski
Move the burst len fixup after setting the generic value for it. This finally enables the fixup introduced by commit 137bd11090d8 ("dmaengine: pl330: Align DMA memcpy operations to MFIFO width"), which otherwise was overwritten by the generic value. Reported-by: kernel test robot <lkp@intel.com> Fixes: 137bd11090d8 ("dmaengine: pl330: Align DMA memcpy operations to MFIFO width") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200825064617.16193-1-m.szyprowski@samsung.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-25Merge tag 'v5.9-rc2' into regulator-5.9Mark Brown
Linux 5.9-rc2
2020-08-25irqchip/ingenic: Leave parent IRQ unmasked on suspendPaul Cercueil
All the wakeup sources we possibly want will go through the interrupt controller, so the parent IRQ must not be masked during suspend, or there won't be any way to wake up the system. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200819180602.136969-1-paul@crapouillou.net
2020-08-25irqchip/stm32-exti: Avoid losing interrupts due to clearing pending bits by ↵qiuguorui1
mistake In the current code, when the eoi callback of the exti clears the pending bit of the current interrupt, it will first read the values of fpr and rpr, then logically OR the corresponding bit of the interrupt number, and finally write back to fpr and rpr. We found through experiments that if two exti interrupts, we call them int1/int2, arrive almost at the same time. in our scenario, the time difference is 30 microseconds, assuming int1 is triggered first. there will be an extreme scenario: both int's pending bit are set to 1, the irq handle of int1 is executed first, and eoi handle is then executed, at this moment, all pending bits are cleared, but the int 2 has not finally been reported to the cpu yet, which eventually lost int2. According to stm32's TRM description about rpr and fpr: Writing a 1 to this bit will trigger a rising edge event on event x, Writing 0 has no effect. Therefore, when clearing the pending bit, we only need to clear the pending bit of the irq. Fixes: 927abfc4461e7 ("irqchip/stm32: Add stm32mp1 support with hierarchy domain") Signed-off-by: qiuguorui1 <qiuguorui1@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org # v4.18+ Link: https://lore.kernel.org/r/20200820031629.15582-1-qiuguorui1@huawei.com
2020-08-25irqchip: Revert modular support for drivers using IRQCHIP_PLATFORM_DRIVER ↵Marc Zyngier
helperse It has become obvious that switching a number of irqchip drivers to being platform drivers without considering the platform was a mistake. We have multiple reports of end-point drivers not probing because the irqchip driver isn't there yet, breaking the expectations of the users. This patch reverts: 920ecb8c35cb ("irqchip/mtk-cirq: Convert to a platform driver") f97dbf48ca43 ("irqchip/mtk-sysirq: Convert to a platform driver") 5be57099d445 ("irqchip/qcom-pdc: Switch to using IRQCHIP_PLATFORM_DRIVER helper macros") 95bf9305d2e3 ("irqchip/qcom-pdc: Allow QCOM_PDC to be loadable as a permanent module") and leave QCOM PDC, MTK sysrq and cirq drivers as built-in, special purpose drivers for the time being until we have worked out a better solution. Reported-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reported-by: Frank Wunderlich <linux@fw-web.de> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/93debe6a0308b66d3f307af67ba7ec2c@kernel.org
2020-08-25drm/omap: fix incorrect lock stateTomi Valkeinen
After commit 92cc68e35863c1c61c449efa2b2daef6e9926048 ("drm/vblank: Use spin_(un)lock_irq() in drm_crtc_vblank_on()") omapdrm locking is broken: WARNING: inconsistent lock state 5.8.0-rc2-00483-g92cc68e35863 #13 Tainted: G W -------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. swapper/0/0 [HC1[1]:SC0[0]:HE0:SE1] takes: ea98222c (&dev->event_lock#2){?.+.}-{2:2}, at: drm_handle_vblank+0x4c/0x520 [drm] {HARDIRQ-ON-W} state was registered at: trace_hardirqs_on+0x9c/0x1ec _raw_spin_unlock_irq+0x20/0x58 omap_crtc_atomic_enable+0x54/0xa0 [omapdrm] drm_atomic_helper_commit_modeset_enables+0x218/0x270 [drm_kms_helper] omap_atomic_commit_tail+0x48/0xc4 [omapdrm] commit_tail+0x9c/0x190 [drm_kms_helper] drm_atomic_helper_commit+0x154/0x188 [drm_kms_helper] drm_client_modeset_commit_atomic+0x228/0x268 [drm] drm_client_modeset_commit_locked+0x60/0x1d0 [drm] drm_client_modeset_commit+0x24/0x40 [drm] drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa8 [drm_kms_helper] drm_fb_helper_set_par+0x2c/0x5c [drm_kms_helper] drm_fb_helper_hotplug_event.part.0+0xa0/0xbc [drm_kms_helper] drm_kms_helper_hotplug_event+0x24/0x30 [drm_kms_helper] output_poll_execute+0x1a8/0x1c0 [drm_kms_helper] process_one_work+0x268/0x800 worker_thread+0x30/0x4e0 kthread+0x164/0x190 ret_from_fork+0x14/0x20 The reason for this is that omapdrm calls drm_crtc_vblank_on() while holding event_lock taken with spin_lock_irq(). It is not clear why drm_crtc_vblank_on() and drm_crtc_vblank_get() are called while holding event_lock. I don't see any problem with moving those calls outside the lock, which is what this patch does. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819103021.440288-1-tomi.valkeinen@ti.com Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-25Merge tag 'v5.9-rc2' into drm-misc-fixesMaarten Lankhorst
Backmerge requested by Tomi for a fix to omap inconsistent locking state issue, and because we need at least v5.9-rc2 now. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2020-08-25thunderbolt: Use maximum USB3 link rate when reclaiming if link is not upMika Westerberg
If the USB3 link is not up the actual link rate is 0 so when reclaiming bandwidth we should look at maximum supported link rate instead. Cc: stable@vger.kernel.org Fixes: 0bd680cd900c ("thunderbolt: Add USB3 bandwidth management") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-08-25thunderbolt: Disable ports that are not implementedNikunj A. Dadhania
Commit 4caf2511ec49 ("thunderbolt: Add trivial .shutdown") exposes a bug in the Thunderbolt driver, that frees an unallocated id, resulting in the following spinlock bad magic bug. [ 20.633803] BUG: spinlock bad magic on CPU#4, halt/3313 [ 20.640030] lock: 0xffff92e6ad5c97e0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 [ 20.672139] Call Trace: [ 20.675032] dump_stack+0x97/0xdb [ 20.678950] ? spin_bug+0xa5/0xb0 [ 20.682865] do_raw_spin_lock+0x68/0x98 [ 20.687397] _raw_spin_lock_irqsave+0x3f/0x5d [ 20.692535] ida_destroy+0x4f/0x124 [ 20.696657] tb_switch_release+0x6d/0xfd [ 20.701295] device_release+0x2c/0x7d [ 20.705622] kobject_put+0x8e/0xac [ 20.709637] tb_stop+0x55/0x66 [ 20.713243] tb_domain_remove+0x36/0x62 [ 20.717774] nhi_remove+0x4d/0x58 Fix the issue by disabling ports that are enabled as per the EEPROM, but not implemented. While at it, update the kernel doc for the disabled field, to reflect this. Cc: stable@vger.kernel.org Fixes: 4caf2511ec49 ("thunderbolt: Add trivial .shutdown") Reported-by: Srikanth Nandamuri <srikanth.nandamuri@intel.com> Signed-off-by: Nikunj A. Dadhania <nikunj.dadhania@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-08-25drm/i915: Fix cmd parser desc matching with masksMika Kuoppala
Our variety of defined gpu commands have the actual command id field and possibly length and flags applied. We did start to apply the mask during initialization of the cmd descriptors but forgot to also apply it on comparisons. Fix comparisons in order to properly deny access with associated commands. v2: fix lri with correct mask (Chris) References: 926abff21a8f ("drm/i915/cmdparser: Ignore Length operands during command matching") Reported-by: Nicolai Stange <nstange@suse.de> Cc: stable@vger.kernel.org # v5.4+ Cc: Miroslav Benes <mbenes@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Chris Wilson <chris.p.wilson@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200817195926.12671-1-mika.kuoppala@linux.intel.com (cherry picked from commit 3b4efa148da36f158cce3f662e831af2834b8e0f) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-08-25i2c: iproc: Fix shifting 31 bitsRay Jui
Fix undefined behaviour in the iProc I2C driver by using 'BIT' marcro. Reported-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Ray Jui <ray.jui@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> [wsa: in commit msg, don't say 'checkpatch' but name the issue] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-08-25i2c: rcar: in slave mode, clear NACK earlierWolfram Sang
Currently, a NACK in slave mode is set/cleared when SCL is held low by the IP core right before the bit is about to be pushed out. This is too late for clearing and then a NACK from the previous byte is still used for the current one. Now, let's clear the NACK right after we detected the STOP condition following the NACK. Fixes: de20d1857dd6 ("i2c: rcar: add slave support") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-08-25i2c: acpi: Remove dead code, i.e. i2c_acpi_match_device()Andy Shevchenko
We have no users of i2c_acpi_match_device() anymore and seems will not have them in the future, thus remove dead code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-08-25i2c: core: Don't fail PRP0001 enumeration when no ID table existAndy Shevchenko
When commit c64ffff7a9d1 ("i2c: core: Allow empty id_table in ACPI case as well") fixed the enumeration of I²C devices on ACPI enabled platforms when driver has no ID table, it missed the PRP0001 support. i2c_device_match() and i2c_acpi_match_device() differently match driver against given device. Use acpi_driver_match_device(), that is used in the former, in i2c_device_probe() and don't fail PRP0001 enumeration when no ID table exist. Fixes: c64ffff7a9d1 ("i2c: core: Allow empty id_table in ACPI case as well") BugLink: https://stackoverflow.com/q/63519678/2511795 Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-08-24scsi: scsi_debug: Remove superfluous close zone in resp_open_zone()Niklas Cassel
resp_open_zone() always calls zbc_open_zone() with parameter explicit set to true. If zbc_open_zone() is called with parameter explicit set to true, and the current zone state is implicit open, it will call zbc_close_zone() on the zone before proceeding. Therefore, there is no need for resp_open_zone() to call zbc_close_zone() on an implicitly open zone before calling zbc_open_zone(). Remove superfluous close zone in resp_open_zone(). Link: https://lore.kernel.org/r/20200821130007.39938-1-niklas.cassel@wdc.com Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-24scsi: libcxgbi: Fix a use after free in cxgbi_conn_xmit_pdu()Dan Carpenter
We accidentally move this logging printk after the free, but that leads to a use after free. Link: https://lore.kernel.org/r/20200824085933.GD208317@mwanda Fixes: e33c2482289b ("scsi: cxgb4i: Add support for iSCSI segmentation offload") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-24scsi: qedf: Fix null ptr reference in qedf_stag_change_workYe Bin
Link: https://lore.kernel.org/r/20200824033436.45570-1-yebin10@huawei.com Acked-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-24sfc: fix boolreturn.cocci warning and rename functionEdward Cree
check_fcs() was returning bool as 0/1, which was a sign that the sense of the function was unclear: false was good, which doesn't really match a name like 'check_$thing'. So rename it to ef100_has_fcs_error(), and use proper booleans in the return statements. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: ocelot: Add of_node_put() before return statementSumera Priyadarsini
Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node, however when control is transferred from the middle of the loop, as in the case of a return or break or goto, there is no decrement thus ultimately resulting in a memory leak. Fix a potential memory leak in felix.c by inserting of_node_put() before the return statement. Issue found with Coccinelle. Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24firestream: Fix memleak in fs_openDinghao Liu
When make_rate() fails, vcc should be freed just like other error paths in fs_open(). Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: arc_emac: Fix memleak in arc_mdio_probeDinghao Liu
When devm_gpiod_get_optional() fails, bus should be freed just like when of_mdiobus_register() fails. Fixes: 1bddd96cba03d ("net: arc_emac: support the phy reset for emac driver") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24NFC: st95hf: Fix memleak in st95hf_in_send_cmdDinghao Liu
When down_killable() fails, skb_resp should be freed just like when st95hf_spi_send() fails. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: dsa: sja1105: Do not use address of compatible member in ↵Nathan Chancellor
sja1105_check_device_id Clang warns: drivers/net/dsa/sja1105/sja1105_main.c:3418:38: warning: address of array 'match->compatible' will always evaluate to 'true' [-Wpointer-bool-conversion] for (match = sja1105_dt_ids; match->compatible; match++) { ~~~ ~~~~~~~^~~~~~~~~~ 1 warning generated. We should check the value of the first character in compatible to see if it is empty or not. This matches how the rest of the tree iterates over IDs. Fixes: 0b0e299720bb ("net: dsa: sja1105: use detected device id instead of DT one on mismatch") Link: https://github.com/ClangBuiltLinux/linux/issues/1139 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24drivers/net/wan/lapbether: Added needed_tailroomXie He
The underlying Ethernet device may request necessary tailroom to be allocated by setting needed_tailroom. This driver should also set needed_tailroom to request the tailroom needed by the underlying Ethernet device to be allocated. Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24ravb: Fixed to be able to unload modulesYuusuke Ashizuka
When this driver is built as a module, I cannot rmmod it after insmoding it. This is because that this driver calls ravb_mdio_init() at the time of probe, and module->refcnt is incremented by alloc_mdio_bitbang() called after that. Therefore, even if ifup is not performed, the driver is in use and rmmod cannot be performed. $ lsmod Module Size Used by ravb 40960 1 $ rmmod ravb rmmod: ERROR: Module ravb is in use Call ravb_mdio_init() at open and free_mdio_bitbang() at close, thereby rmmod is possible in the ifdown state. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Yuusuke Ashizuka <ashiduka@fujitsu.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24Merge tag 'io_uring-5.9-2020-08-23' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - NVMe pull request from Sagi: - nvme completion rework from Christoph and Chao that mostly came from a bit of divergence of how we classify errors related to pathing/retry etc. - nvmet passthru fixes from Chaitanya - minor nvmet fixes from Amit and I - mpath round-robin path selection fix from Martin - ignore noiob for zoned devices from Keith - minor nvme-fc fix from Tianjia" - BFQ cgroup leak fix (Dmitry) - block layer MAINTAINERS addition (Geert) - fix null_blk FUA checking (Hou) - get_max_io_size() size fix (Keith) - fix block page_is_mergeable() for compound pages (Matthew) - discard granularity fixes (Ming) - IO scheduler ordering fix (Ming) - misc fixes * tag 'io_uring-5.9-2020-08-23' of git://git.kernel.dk/linux-block: (31 commits) null_blk: fix passing of REQ_FUA flag in null_handle_rq nvmet: Disable keep-alive timer when kato is cleared to 0h nvme: redirect commands on dying queue nvme: just check the status code type in nvme_is_path_error nvme: refactor command completion nvme: rename and document nvme_end_request nvme: skip noiob for zoned devices nvme-pci: fix PRP pool size nvme-pci: Use u32 for nvme_dev.q_depth and nvme_queue.q_depth nvme: Use spin_lock_irq() when taking the ctrl->lock nvmet: call blk_mq_free_request() directly nvmet: fix oops in pt cmd execution nvmet: add ns tear down label for pt-cmd handling nvme: multipath: round-robin: eliminate "fallback" variable nvme: multipath: round-robin: fix single non-optimized path case nvme-fc: Fix wrong return value in __nvme_fc_init_request() nvmet-passthru: Reject commands with non-sgl flags set nvmet: fix a memory leak blkcg: fix memleak for iolatency MAINTAINERS: Add missing header files to BLOCK LAYER section ...
2020-08-24drm/i915: Update DRIVER_DATE to 20200824Rodrigo Vivi
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-08-24drm/amdgpu: Get DRM dev from adev by inline-fLuben Tuikov
Add a static inline adev_to_drm() to obtain the DRM device pointer from an amdgpu_device pointer. Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-24drm/amdgpu: drm_device to amdgpu_device by inline-f (v2)Luben Tuikov
Get the amdgpu_device from the DRM device by use of an inline function, drm_to_adev(). The inline function resolves a pointer to struct drm_device to a pointer to struct amdgpu_device. v2: Use a typed visible static inline function instead of an invisible macro. Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-24drm/amdgpu: enable HDP clock gattingPrike.Liang
Enabe HDP SD/DS clock gatting in Renoir series. Signed-off-by: Prike.Liang <Prike.Liang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-24drm/amdgpu: enable ATHUB clock gattingPrike.Liang
Enable ATHUB clock gatting set in Renoir series. Signed-off-by: Prike.Liang <Prike.Liang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-24drm/amd/pm: set VCN pg per instancesJiansong Chen
When deciding whether to set pg for vcn1, instances number is more generic than chip name. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-24drm/amdgpu: annotate a false positive recursive lockingDennis Li
Re-apply commit 72e14ebf9fc09e33b28b70f00a2ed9821c198633 [ 584.110304] ============================================ [ 584.110590] WARNING: possible recursive locking detected [ 584.110876] 5.6.0-deli-v5.6-2848-g3f3109b0e75f #1 Tainted: G OE [ 584.111164] -------------------------------------------- [ 584.111456] kworker/38:1/553 is trying to acquire lock: [ 584.111721] ffff9b15ff0a47a0 (&adev->reset_sem){++++}, at: amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu] [ 584.112112] but task is already holding lock: [ 584.112673] ffff9b1603d247a0 (&adev->reset_sem){++++}, at: amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu] [ 584.113068] other info that might help us debug this: [ 584.113689] Possible unsafe locking scenario: [ 584.114350] CPU0 [ 584.114685] ---- [ 584.115014] lock(&adev->reset_sem); [ 584.115349] lock(&adev->reset_sem); [ 584.115678] *** DEADLOCK *** [ 584.116624] May be due to missing lock nesting notation [ 584.117284] 4 locks held by kworker/38:1/553: [ 584.117616] #0: ffff9ad635c1d348 ((wq_completion)events){+.+.}, at: process_one_work+0x21f/0x630 [ 584.117967] #1: ffffac708e1c3e58 ((work_completion)(&con->recovery_work)){+.+.}, at: process_one_work+0x21f/0x630 [ 584.118358] #2: ffffffffc1c2a5d0 (&tmp->hive_lock){+.+.}, at: amdgpu_device_gpu_recover+0xae/0x1030 [amdgpu] [ 584.118786] #3: ffff9b1603d247a0 (&adev->reset_sem){++++}, at: amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu] [ 584.119222] stack backtrace: [ 584.119990] CPU: 38 PID: 553 Comm: kworker/38:1 Kdump: loaded Tainted: G OE 5.6.0-deli-v5.6-2848-g3f3109b0e75f #1 [ 584.120782] Hardware name: Supermicro SYS-7049GP-TRT/X11DPG-QT, BIOS 3.1 05/23/2019 [ 584.121223] Workqueue: events amdgpu_ras_do_recovery [amdgpu] [ 584.121638] Call Trace: [ 584.122050] dump_stack+0x98/0xd5 [ 584.122499] __lock_acquire+0x1139/0x16e0 [ 584.122931] ? trace_hardirqs_on+0x3b/0xf0 [ 584.123358] ? cancel_delayed_work+0xa6/0xc0 [ 584.123771] lock_acquire+0xb8/0x1c0 [ 584.124197] ? amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu] [ 584.124599] down_write+0x49/0x120 [ 584.125032] ? amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu] [ 584.125472] amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu] [ 584.125910] ? amdgpu_ras_error_query+0x1b8/0x2a0 [amdgpu] [ 584.126367] amdgpu_ras_do_recovery+0x159/0x190 [amdgpu] [ 584.126789] process_one_work+0x29e/0x630 [ 584.127208] worker_thread+0x3c/0x3f0 [ 584.127621] ? __kthread_parkme+0x61/0x90 [ 584.128014] kthread+0x12f/0x150 [ 584.128402] ? process_one_work+0x630/0x630 [ 584.128790] ? kthread_park+0x90/0x90 [ 584.129174] ret_from_fork+0x3a/0x50 Each adev has owned lock_class_key to avoid false positive recursive locking. v2: 1. register adev->lock_key into lockdep, otherwise lockdep will report the below warning [ 1216.705820] BUG: key ffff890183b647d0 has not been registered! [ 1216.705924] ------------[ cut here ]------------ [ 1216.705972] DEBUG_LOCKS_WARN_ON(1) [ 1216.705997] WARNING: CPU: 20 PID: 541 at kernel/locking/lockdep.c:3743 lockdep_init_map+0x150/0x210 v3: change to use down_write_nest_lock to annotate the false dead-lock warning. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dennis Li <Dennis.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-24RDMA/rxe: Fix the parent sysfs read when the interface has 15 charsYi Zhang
'parent' sysfs reads will yield '\0' bytes when the interface name has 15 chars, and there will no "\n" output. To reproduce, create one interface with 15 chars: [root@test ~]# ip a s enp0s29u1u7u3c2 2: enp0s29u1u7u3c2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000 link/ether 02:21:28:57:47:17 brd ff:ff:ff:ff:ff:ff inet6 fe80::ac41:338f:5bcd:c222/64 scope link noprefixroute valid_lft forever preferred_lft forever [root@test ~]# modprobe rdma_rxe [root@test ~]# echo enp0s29u1u7u3c2 > /sys/module/rdma_rxe/parameters/add [root@test ~]# cat /sys/class/infiniband/rxe0/parent enp0s29u1u7u3c2[root@test ~]# [root@test ~]# f="/sys/class/infiniband/rxe0/parent" [root@test ~]# echo "$(<"$f")" -bash: warning: command substitution: ignored null byte in input enp0s29u1u7u3c2 Use scnprintf and PAGE_SIZE to fill the sysfs output buffer. Cc: stable@vger.kernel.org Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200820153646.31316-1-yi.zhang@redhat.com Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Yi Zhang <yi.zhang@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-24RDMA/rtrs-srv: Replace device_register with device_initialize and device_addMd Haris Iqbal
There are error cases when we will call free_srv before device kobject is initialized; in such cases calling put_device generates the following warning: kobject: '(null)' (000000009f5445ed): is not initialized, yet kobject_put() is being called. So call device_initialize() only once when the server is allocated. If we end up calling put_srv() and subsequently free_srv(), our call to put_device() would result in deletion of the obj. Call device_add() later when we actually have a connection. Correspondingly, call device_del() instead of device_unregister() when srv->dev_ref falls to 0. Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality") Link: https://lore.kernel.org/r/20200811092722.2450-1-haris.iqbal@cloud.ionos.com Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com> Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-24drm/amdgpu: refine create and release logic of hive infoDennis Li
Change to dynamically create and release hive info object, which help driver support more hives in the future. v2: Change to save hive object pointer in adev, to avoid locking xgmi_mutex every time when calling amdgpu_get_xgmi_hive. v3: 1. Change type of hive object pointer in adev from void* to amdgpu_hive_info*. 2. remove unnecessary variable initialization. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Dennis Li <Dennis.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-24drm/amdgpu: refine message print for devices of hiveDennis Li
Using dev_xxx instead of DRM_xxx/pr_xxx to indicate which device of a hive is the message for. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dennis Li <Dennis.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-24drm/amdgpu: fix the nullptr issue when reenter GPU recoveryDennis Li
in single gpu system, if driver reenter gpu recovery, amdgpu_device_lock_adev will return false, but hive is nullptr now. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Dennis Li <Dennis.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-24drm/amdgpu: change reset lock from mutex to rw_semaphoreDennis Li
clients don't need reset-lock for synchronization when no GPU recovery. v2: change to return the return value of down_read_killable. v3: if GPU recovery begin, VF ignore FLR notification. Reviewed-by: Monk Liu <monk.liu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dennis Li <Dennis.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-24drm/amd/pm: enable run_btc callback for sienna_cichlidJiansong Chen
DC BTC support for sienna_cichlid is added, it provides the DC tolerance and aging measurements. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-24drivers: gpu: amd: Initialize amdgpu_dm_backlight_caps object to 0 in ↵Furquan Shaikh
amdgpu_dm_update_backlight_caps In `amdgpu_dm_update_backlight_caps()`, there is a local `amdgpu_dm_backlight_caps` object that is filled in by `amdgpu_acpi_get_backlight_caps()`. However, this object is uninitialized before the call and hence the subsequent check for aux_support can fail since it is not initialized by `amdgpu_acpi_get_backlight_caps()` as well. This change initializes this local `amdgpu_dm_backlight_caps` object to 0. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Furquan Shaikh <furquan@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-24drm/amd/pm: Remove unnecessary castAlex Dewar
In init_powerplay_table_information() the value returned from kmalloc() is cast unnecessarily. Remove cast. Issue identified with Coccinelle. Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-24drm/amd/powerplay: remove duplicate includeWang Hai
Remove asic_reg/nbio/nbio_6_1_offset.h which is included more than once Reviewed-by: Evan Quan <evan.quan@amd.com> Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-24drm/amd/display: remove unintended executable modeLukas Bulwahn
Besides the intended change, commit 4cc1178e166a ("drm/amdgpu: replace DRM prefix with PCI device info for gfx/mmhub") also set the source files mmhub_v1_0.c and gfx_v9_4.c to be executable, i.e., changed fromold mode 644 to new mode 755. Commit 241b2ec9317e ("drm/amd/display: Add dcn30 Headers (v2)") added the four header files {dpcs,dcn}_3_0_0_{offset,sh_mask}.h as executable, i.e., mode 755. Set to the usual modes for source and headers files and clean up those mistakes. No functional change. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-24drm/amdgpu: refine codes to avoid reentering GPU recoveryDennis Li
if other threads have holden the reset lock, recovery will fail to try_lock. Therefore we introduce atomic hive->in_reset and adev->in_gpu_reset, to avoid reentering GPU recovery. v2: drop "? true : false" in the definition of amdgpu_in_reset Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Dennis Li <Dennis.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-24drm/amd/display: Reject overlay plane configurations in multi-display scenariosNicholas Kazlauskas
[Why] These aren't stable on some platform configurations when driving multiple displays, especially on higher resolution. In particular the delay in asserting p-state and validating from x86 outweights any power or performance benefit from the hardware composition. Under some configurations this will manifest itself as extreme stutter or unresponsiveness especially when combined with cursor movement. [How] Disable these for now. Exposing overlays to userspace doesn't guarantee that they'll be able to use them in any and all configurations and it's part of the DRM contract to have userspace gracefully handle validation failures when they occur. Valdiation occurs as part of DC and this in particular affects RV, so disable this in dcn10_global_validation. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-24drm/amdkfd: sparse: Fix warning in reading SDMA countersMukul Joshi
Add __user annotation to fix related sparse warning while reading SDMA counters from userland. Also, rework the read SDMA counters function by removing redundant checks. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-19 04:26:00 +0000