summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-08-06drm/amdgpu: expand sienna chichlid reg access supportJohn Clements
Added dedicated 64bit reg read/write support Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu: fix spelling mistake "Falied" -> "Failed"Colin Ian King
There is a spelling mistake in a DRM_ERROR error message. Fix it. This got lost in a merge, restore the fix. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 4afaa61db9cf5250b5734c2531b226e7b3a3d691)
2020-08-06drm/amd/display: Drop dm_determine_update_type_for_commitNicholas Kazlauskas
[Why] This was added in the past to solve the issue of not knowing when to stall for medium and full updates in DM. Since DC is ultimately decides what requires bandwidth changes we wanted to make use of it directly to determine this. The problem is that we can't actually pass any of the stream or surface updates into DC global validation, so we don't actually check if the new configuration is valid - we just validate the old existing config instead and stall for outstanding commits to finish. There's also the problem of grabbing the DRM private object for pageflips which can lead to page faults in the case where commits execute out of order and free a DRM private object state that was still required for commit tail. [How] Now that we reset the plane in DM with the same conditions DC checks we can have planes go through DC validation and we know when we need to check and stall based on whether the stream or planes changed. We mark lock_and_validation_needed whenever we've done this, so just go back to using that instead of dm_determine_update_type_for_commit. Since we'll skip resetting the plane for a pageflip we will no longer grab the DRM private object for pageflips as well, avoiding the page fault issued caused by pageflipping under load with commits executing out of order. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Reset plane for anything that's not a FAST updateNicholas Kazlauskas
[Why] MEDIUM or FULL updates can require global validation or affect bandwidth. By treating these all simply as surface updates we aren't actually passing this through DC global validation. [How] There's currently no way to pass surface updates through DC global validation, nor do I think it's a good idea to change the interface to accept these. DC global validation itself is currently stateless, and we can move our update type checking to be stateless as well by duplicating DC surface checks in DM based on DRM properties. We wanted to rely on DC automatically determining this since DC knows best, but DM is ultimately what fills in everything into DC plane state so it does need to know as well. There are basically only three paths that we exercise in DM today: 1) Cursor (async update) 2) Pageflip (fast update) 3) Full pipe programming (medium/full updates) Which means that anything that's more than a pageflip really needs to go down path #3. So this change duplicates all the surface update checks based on DRM state instead inside of should_reset_plane(). Next step is dropping dm_determine_update_type_for_commit and we no longer require the old DC state at all for global validation. Optimization can come later so we don't reset DC planes at all for MEDIUM udpates and avoid validation, but we might require some extra checks in DM to achieve this. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Use validated tiling_flags and tmz_surface in commit_tailNicholas Kazlauskas
[Why] So we're not racing with userspace or deadlocking DM. [How] These flags are now stored on dm_plane_state itself and acquried and validated during commit_check, so just use those instead. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Avoid using unvalidated tiling_flags and tmz_surface in ↵Nicholas Kazlauskas
prepare_planes [Why] We're racing with userspace as the flags could potentially change from when we acquired and validated them in commit_check. [How] We unfortunately can't drop this function in its entirety from prepare_planes since we don't know the afb->address at commit_check time yet. So instead of querying new tiling_flags and tmz_surface use the ones from the plane_state directly. While we're at it, also update the force_disable_dcc option based on the state from atomic check. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Reset plane when tiling flags changeNicholas Kazlauskas
[Why] Enabling or disable DCC or switching between tiled and linear formats can require bandwidth updates. They're currently skipping all DC validation by being treated as purely surface updates. [How] Treat tiling_flag changes (which encode DCC state) as a condition for resetting the plane. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Store tiling_flags and tmz_surface on dm_plane_stateNicholas Kazlauskas
[Why] Store these in advance so we can reuse them later in commit_tail without having to reserve the fbo again. These will also be used for checking for tiling changes when deciding to reset the plane or not. [How] This change should mostly be a refactor. Only commit check is affected for now and I'll drop the get_fb_info calls in prepare_planes and commit_tail after. This runs a prepass loop once we think that all planes have been added to the context and replaces the get_fb_info calls with accessing the dm_plane_state instead. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: update driver if file for sienna_cichlidLikun Gao
Update drive if file for sienna_cichlid. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu: new ids flag for tmz (v2)Pierre-Eric Pelloux-Prayer
Allows UMD to know if TMZ is supported and enabled. This commit also bumps KMS_DRIVER_MINOR because if we don't UMD can't tell if "ids_flags & AMDGPU_IDS_FLAGS_TMZ == 0" means "tmz is not enabled" or "tmz may be enabled but the kernel doesn't report it". v2: use amdgpu_is_tmz() and reworded commit message. Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: add control method to bypass metrics cache on Vega12Evan Quan
As for the gpu metric export, metrics cache makes no sense. It's up to user to decide how often the metrics should be retrieved. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: add control method to bypass metrics cache on Vega20Evan Quan
As for the gpu metric export, metrics cache makes no sense. It's up to user to decide how often the metrics should be retrieved. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: add control method to bypass metrics cache on RenoirEvan Quan
As for the gpu metric export, metrics cache makes no sense. It's up to user to decide how often the metrics should be retrieved. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: add control method to bypass metrics cache on Sienna CichlidEvan Quan
As for the gpu metric export, metrics cache makes no sense. It's up to user to decide how often the metrics should be retrieved. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: add control method to bypass metrics cache on Navi10Evan Quan
As for the gpu metric export, metrics cache makes no sense. It's up to user to decide how often the metrics should be retrieved. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: add control method to bypass metrics cache on ArcturusEvan Quan
As for the gpu metric export, metrics cache makes no sense. It's up to user to decide how often the metrics should be retrieved. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: add Vega12 support for gpu metrics exportEvan Quan
Add Vega12 gpu metrics export interface. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: add Vega20 support for gpu metrics exportEvan Quan
Add Vega20 gpu metrics export interface. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: enable gpu_metrics export on legacy powerplay routinesEvan Quan
Enable gpu_metrics support on legacy powerplay routines. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: add Renoir support for gpu metrics export(V2)Evan Quan
Add Renoir gpu metrics export interface. V2: use memcpy to make code more compact Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: add Sienna Cichlid support for gpu metrics exportEvan Quan
Add Sienna Cichlid gpu metrics export interface. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: add Navi1x support for gpu metrics exportEvan Quan
Add Navi1x gpu metrics export interface. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: update the data structure for NV12 SmuMetricsEvan Quan
Although it does not bring any problem for now, the coming gpu metrics interface needs to handle them differently based on the asic type. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: add Arcturus support for gpu metrics exportEvan Quan
Add Arcturus gpu metrics export interface. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: implement SMU V11 common APIs for retrieving link speed/widthEvan Quan
This will be shared around all SMU V11 asics. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: add new sysfs interface for retrieving gpu metrics(V2)Evan Quan
A new interface for UMD to retrieve gpu metrics data. V2: rich the documentation Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: define an universal data structure for gpu metrics (V4)Evan Quan
Thus we can provide an interface for UMD to retrieve gpu metrics data. V2: better naming and comments V3: two structures created for dGPU and APU separately V4: add driver attached timestamp Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu: fix spelling mistake "paramter" -> "parameter"Colin Ian King
There is a spelling mistake in a dev_warn message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: grant Arcturus softmin/max setting on latest PM firmwareEvan Quan
For Arcturus, the softmin/max settings from driver are permitted on the latest(54.26 later) SMU firmware. Thus enabling them in driver. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdkfd: option to disable system mem limitPhilip Yang
If multiple process share system memory through /dev/shm, KFD allocate memory should not fail if it reaches the system memory limit because one copy of physical system memory are shared by multiple process. Add module parameter no_system_mem_limit to provide user option to disable system memory limit check at runtime using sysfs or during driver module init using kernel boot argument. By default the system memory limit is on. Print out debug message to warn user if KFD allocate memory failed because system memory reaches limit. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Fix wrong return value in dm_update_plane_state()Tianjia Zhang
On an error exit path, a negative error code should be returned instead of a positive return value. Fixes: 9e869063b0021 ("drm/amd/display: Move iteration out of dm_update_planes") Cc: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06net: hns3: fix spelling mistake "could'nt" -> "couldn't"Colin Ian King
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-06Merge tag 'sched-fifo-2020-08-04' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sched/fifo updates from Ingo Molnar: "This adds the sched_set_fifo*() encapsulation APIs to remove static priority level knowledge from non-scheduler code. The three APIs for non-scheduler code to set SCHED_FIFO are: - sched_set_fifo() - sched_set_fifo_low() - sched_set_normal() These are two FIFO priority levels: default (high), and a 'low' priority level, plus sched_set_normal() to set the policy back to non-SCHED_FIFO. Since the changes affect a lot of non-scheduler code, we kept this in a separate tree" * tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) sched,tracing: Convert to sched_set_fifo() sched: Remove sched_set_*() return value sched: Remove sched_setscheduler*() EXPORTs sched,psi: Convert to sched_set_fifo_low() sched,rcutorture: Convert to sched_set_fifo_low() sched,rcuperf: Convert to sched_set_fifo_low() sched,locktorture: Convert to sched_set_fifo() sched,irq: Convert to sched_set_fifo() sched,watchdog: Convert to sched_set_fifo() sched,serial: Convert to sched_set_fifo() sched,powerclamp: Convert to sched_set_fifo() sched,ion: Convert to sched_set_normal() sched,powercap: Convert to sched_set_fifo*() sched,spi: Convert to sched_set_fifo*() sched,mmc: Convert to sched_set_fifo*() sched,ivtv: Convert to sched_set_fifo*() sched,drm/scheduler: Convert to sched_set_fifo*() sched,msm: Convert to sched_set_fifo*() sched,psci: Convert to sched_set_fifo*() sched,drbd: Convert to sched_set_fifo*() ...
2020-08-06Merge tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds
Pull MIPS upates from Thomas Bogendoerfer: - improvements for Loongson64 - extended ingenic support - removal of not maintained paravirt system type - cleanups and fixes * tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (81 commits) MIPS: SGI-IP27: always enable NUMA in Kconfig MAINTAINERS: Update KVM/MIPS maintainers MIPS: Update default config file for Loongson-3 MIPS: KVM: Add kvm guest support for Loongson-3 dt-bindings: mips: Document Loongson kvm guest board MIPS: handle Loongson-specific GSExc exception MIPS: add definitions for Loongson-specific CP0.Diag1 register MIPS: only register FTLBPar exception handler for supported models MIPS: ingenic: Hardcode mem size for qi,lb60 board MIPS: DTS: ingenic/qi,lb60: Add model and memory node MIPS: ingenic: Use fw_passed_dtb even if CONFIG_BUILTIN_DTB MIPS: head.S: Init fw_passed_dtb to builtin DTB of: address: Fix parser address/size cells initialization of_address: Guard of_bus_pci_get_flags with CONFIG_PCI MIPS: DTS: Fix number of msi vectors for Loongson64G MIPS: Loongson64: Add ISA node for LS7A PCH MIPS: Loongson64: DTS: Fix ISA and PCI I/O ranges for RS780E PCH MIPS: Loongson64: Enlarge IO_SPACE_LIMIT MIPS: Loongson64: Process ISA Node in DeviceTree of_address: Add bus type match for pci ranges parser ...
2020-08-06Merge tag 'hyperv-next-signed' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - A patch series from Andrea to improve vmbus code - Two clean-up patches from Alexander and Randy * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hyperv: hyperv.h: drop a duplicated word tools: hv: change http to https in hv_kvp_daemon.c Drivers: hv: vmbus: Remove the lock field from the vmbus_channel struct scsi: storvsc: Introduce the per-storvsc_device spinlock Drivers: hv: vmbus: Remove unnecessary channel->lock critical sections (sc_list updaters) Drivers: hv: vmbus: Use channel_mutex in channel_vp_mapping_show() Drivers: hv: vmbus: Remove unnecessary channel->lock critical sections (sc_list readers) Drivers: hv: vmbus: Replace cpumask_test_cpu(, cpu_online_mask) with cpu_online() Drivers: hv: vmbus: Remove the numa_node field from the vmbus_channel struct Drivers: hv: vmbus: Remove the target_vp field from the vmbus_channel struct
2020-08-06x86/headers: Remove APIC headers from <asm/smp.h>Ingo Molnar
The APIC headers are relatively complex and bring in additional header dependencies - while smp.h is a relatively simple header included from high level headers. Remove the dependency and add in the missing #include's in .c files where they gained it indirectly before. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-08-06rnbd: no need to set bi_end_io in rnbd_bio_map_kernGuoqing Jiang
Since we always set bi_end_io after call rnbd_bio_map_kern, so the setting in rnbd_bio_map_kern is redundant. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Acked-by: Danil Kipnis <danil.kipnis@cloud.ionos.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-06rnbd: remove rnbd_dev_submit_ioGuoqing Jiang
The function only has one caller, so let's open code it in process_rdma. Another bonus is we can avoid push/pop stack, since we need to pass 8 arguments to rnbd_dev_submit_io. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Acked-by: Danil Kipnis <danil.kipnis@cloud.ionos.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-06media: camss: fix memory leaks on error handling paths in probeEvgeny Novikov
camss_probe() does not free camss on error handling paths. The patch introduces an additional error label for this purpose. Besides, it removes call of v4l2_async_notifier_cleanup() from camss_of_parse_ports() since its caller, camss_probe(), cleans up all its resources itself. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Co-developed-by: Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-06media: davinci: vpif_capture: fix potential double freeEvgeny Novikov
In case of errors vpif_probe_complete() releases memory for vpif_obj.sd and unregisters the V4L2 device. But then this is done again by vpif_probe() itself. The patch removes the cleaning from vpif_probe_complete(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-06media: radio: remove redundant assignment to variable retvalColin Ian King
The variable retval is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-06media: allegro: fix potential null dereference on headerColin Ian King
The pointer header is an alias to msg and msg is being null checked. However, if msg is null then header is also null and this can lead to a null pointer dereference on the assignment type = header->type. Fix this just using header->type after the null check and removing the need for type as it is only used once. Addresses-Coverity: ("Dereference before null check") Fixes: 3de16839669f ("media: allegro: add explicit mail encoding and decoding") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-06media: mtk-mdp: Fix a refcounting bug on error in initDan Carpenter
We need to call of_node_put(comp->dev_node); on the error paths in this function. Fixes: c8eb2d7e8202 ("[media] media: Add Mediatek MDP Driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-06media: allegro: fix an error pointer vs NULL checkDan Carpenter
The allegro_mbox_init() function returns error pointers, it never returns NULL. Fixes: 94dc76560261 ("media: allegro: rework mbox handling") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-06media: meye: fix missing pm_mchip_mode fieldHans Verkuil
After commit 9c4a8489ab7c ("media: meye: use generic power management") the pm_mchip_mode field should now always be present, even if CONFIG_PM is not set. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: kernel test robot <lkp@intel.com> Fixes: 9c4a8489ab7c ("media: meye: use generic power management") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-06media: cafe-driver: use generic power managementVaibhav Gupta
Drivers using legacy PM have to manage PCI states and device's PM states themselves. They also need to take care of configuration registers. With improved and powerful support of generic PM, PCI Core takes care of above mentioned, device-independent, jobs. This driver makes use of PCI helper functions like pci_save/restore_state() and pci_enable/disable_device() to do required operations. In generic mode, they are no longer needed. Change function parameter in both .suspend() and .resume() to "struct device*" type. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-06media: saa7164: use generic power managementVaibhav Gupta
The .suspend() and .resume() callbacks are not defined for this driver. Still, their power management structure follows the legacy framework. To bring it under the generic framework, simply remove the binding of callbacks from struct "pci_driver". Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-06Merge branch 'WIP.locking/seqlocks' into locking/urgentIngo Molnar
Pick up the full seqlock series PeterZ is working on. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-08-06drm/ttm: rename ttm_mem_reg to ttm_resource.Dave Airlie
This name better reflects what the object does. I didn't rename all the pointers it seemed too messy. Signed-off-by: Dave Airlie <airlied@redhat.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-60-airlied@gmail.com
2020-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ...
generated by cgit (git 2.34.1) at 2025-09-24 05:20:20 +0000