| Age | Commit message (Collapse) | Author |
|---|
|
These four lines clearing, masking and resetting the state
of the busy detect state machine is repeated five times in
the code so break this out to a small helper so things are
easier to read.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-9-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
As is custom, use a big switch statement to transition
between the edges of the state machine inside
the ux500 ->busy_complete callback.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-8-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Return true if and only if we reached the state
MMCI_BUSY_DONE in the ux500 ->busy_complete() callback.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-7-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This makes the ux500 ->busy_complete() callback re-read
the status register 10 times while waiting for the busy
signal to assert in the status register.
If this does not happen, we bail out regarding the
command completed already, i.e. before we managed to
start to check the busy status.
There is a comment in the code about this, let's just
implement it to be certain that we can catch this glitch
if it happens.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-6-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This refactors the ->busy_complete() callback currently
only used by Ux500 and STM32 to handle busy detection on
hardware where one and the same IRQ is fired whether we get
a start or an end signal on busy detect.
The code is currently using the cached status from the
command IRQ in ->busy_status as a state to select what to
do next: if this state is non-zero we are waiting for
IRQs and if it is zero we treat the state as the starting
point for a busy detect wait cycle.
Make this explicit by creating a state machine where the
->busy_complete callback moves between three states.
The Ux500 busy detect code currently assumes this order:
we enable the busy detect IRQ, get a busy start IRQ, then a
busy end IRQ, and then we clear and mask this IRQ and
proceed.
We insert debug prints for unexpected states.
This works as before on most cards, however on a
problematic card that is not working with busy detect, and
which I have been debugging, the following happens a lot:
[ 3.380554] mmci-pl18x 80005000.mmc: no busy signalling in time
[ 3.387420] mmci-pl18x 80005000.mmc: no busy signalling in time
[ 3.394561] mmci-pl18x 80005000.mmc: lost busy status
when waiting for busy start IRQ
This probably means that the busy detect start IRQ has
already occurred when we start executing the
->busy_complete() callbacks, and the busy detect end IRQ
is counted as the start IRQ, and this is what is causing
the card to not be detected properly.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-5-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The busy detect callback for Ux500 checks for an error
in the status in the first if() clause. The only practical
reason is that if an error occurs, the if()-clause is not
executed, and the code falls through to the last
if()-clause if (host->busy_status) which will clear and
disable the irq. Make this explicit instead: it is easier
to read.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-4-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Some interesting flags can arrive while we are waiting for
the first busy detect IRQ so OR then onto the stashed
flags so they are not missed.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-3-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This does two things: firsr replace the hard-to-read long
if-expression:
if (!host->busy_status && !(status & err_msk) &&
(readl(base + MMCISTATUS) & host->variant->busy_detect_flag)) {
With the more readable:
if (!host->busy_status && !(status & err_msk)) {
status = readl(base + MMCISTATUS);
if (status & host->variant->busy_detect_flag) {
Second notice that the re-read MMCISTATUS register is now
stored into the status variable, using logic OR because what
if something else changed too?
While we are at it, explain what the function is doing.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-2-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
If we are starting a command which can generate a busy
response, then clear the variable host->busy_status
if the variant is using a ->busy_complete callback.
We are lucky that the member is zero by default and
hopefully always gets cleared in the ->busy_complete
callback even on errors, but it's just fragile so
make sure it is always initialized to zero.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-1-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
AMD systems have historically provided an "AMD Node ID" that is a unique
identifier for each die in a multi-die package. This was associated with
a unique instance of the AMD Northbridge on a legacy system. And now it
is associated with a unique instance of the AMD Data Fabric on modern
systems. Each instance is referred to as a "Node"; this is an
AMD-specific term not to be confused with NUMA nodes.
The data fabric provides a number of interfaces accessible through a set
of functions in a single PCI device. There is one PCI device per Data
Fabric (AMD Node), and multi-die systems will see multiple such PCI
devices. The AMD Node ID matches a Node's position in the PCI hierarchy.
For example, the Node 0 is accessed using the first PCI device, Node 1
is accessed using the second, and so on. A logical CPU can find its AMD
Node ID using CPUID. Furthermore, the AMD Node ID is used within the
hardware fabric, so it is not purely a logical value.
Heterogeneous AMD systems, with a CPU Data Fabric connected to GPU data
fabrics, follow a similar convention. Each CPU and GPU die has a unique
AMD Node ID value, and each Node ID corresponds to PCI devices in
sequential order.
However, there are two caveats:
1) GPUs are not x86, and they don't have CPUID to read their AMD Node ID
like on CPUs. This means the value is more implicit and based on PCI
enumeration and hardware-specifics.
2) There is a gap in the hardware values for AMD Node IDs. Values 0-7
are for CPUs and values 8-15 are for GPUs.
For example, a system with one CPU die and two GPUs dies will have the
following values:
CPU0 -> AMD Node 0
GPU0 -> AMD Node 8
GPU1 -> AMD Node 9
EDAC is the only subsystem where this has a practical effect. Memory
errors on AMD systems are commonly reported through MCA to a CPU on the
local AMD Node. The error information is passed along to EDAC where the
AMD EDAC modules use the AMD Node ID of reporting logical CPU to access
AMD Node information.
However, memory errors from a GPU die will be reported to the CPU die.
Therefore, the logical CPU's AMD Node ID can't be used since it won't
match the AMD Node ID of the GPU die. The AMD Node ID of the GPU die is
provided as part of the MCA information, and the value will match the
hardware enumeration (e.g. 8-15).
Handle this situation by discovering GPU dies the same way as CPU dies
in the AMD NB code. But do a "node id" fixup in AMD64 EDAC where it's
needed.
The GPU data fabrics provide a register with the base AMD Node ID for
their local "type", i.e. GPU data fabric. This value is the same for all
fabrics of the same type in a system.
Read and cache the base AMD Node ID from one of the GPU devices during
module initialization. Use this to fixup the "node id" when reporting
memory errors at runtime.
[ bp: Squash a fix making gpu_node_map static as reported by
Tom Rix <trix@redhat.com>.
Link: https://lore.kernel.org/r/20230610210930.174074-1-trix@redhat.com ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Co-developed-by: Muralidhara M K <muralidhara.mk@amd.com>
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230515113537.1052146-6-muralimk@amd.com
|
|
Invert if condition and get rid of redundant else.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230616203356.27343-4-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add warning for BYT_VAL_REG retrieval failure and continue such case
to avoid unintended reads/writes in pm_ops.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230616203356.27343-3-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Reduce scope of spinlock to IO operations in ->dbg_show() hook
and save a few bytes.
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-12 (-12)
Function old new delta
byt_gpio_dbg_show 890 878 -12
Total: Before=17029, After=17017, chg -0.07%
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230616203356.27343-2-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
For multi-link operation(MLO) TDLS management
frames need to be transmitted on a specific link.
The TDLS setup request will add BSSID along with
peer address and userspace will pass the link-id
based on BSSID value to the driver(or mac80211).
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.cb3d87c22812.Ia3d15ac4a9a182145bf2d418bcb3ddf4539cd0a7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Start supporting API version 81 for AX devices.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230615094410.e61fdc474d89.I3d9823231fa7fc47158b8aa3561b43822c8c86cd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Scan API version 16 use link ID for reporting the TSF of
scan results (instead of MAC ID used in previous versions).
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230615094410.05bf3e612297.Ie3075f7068af38c335d26778ab7d0ec4b1c026c3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
And instead use the vif getter functions, as a preparation for
supporting disabled/dormant links.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230615094410.61ca688cbbf1.Ic1b4049cf156238ff16e6c57959004da911cb5c8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There several transitions to handle in eSR mode:
* SMPS should be disabled when in eSR mode
* indicate to the fw whether the new added link should use the
listen lmac or the main lmac
* RLC is offloaded when in eSR mode; adjust RLC command accordingly
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230615094410.fb6409f44aca.I502460dec15e0b76035ad3cd809afa4ac16e9fe1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The max active links that are supported by the FW is hard coded.
This is wrong since this value is HW-dependent. Fix this by
determining according to the actual HW.
Also remove a redundant check that the number of active links
doesn't exceeds the maximum.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230615094410.e78ad74c6715.I68b26911c0a312d72eaf25344b448d03b1c61f4e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Validate index before access iwl_rate_mcs to keep rate->index
inside the valid boundaries. Use MCS_0_INDEX if index is less
than MCS_0_INDEX and MCS_9_INDEX if index is greater then
MCS_9_INDEX.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.79f16b3aef32.If1137f894775d6d07b78cbf3a6163ffce6399507@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Verify slots_num is valid in iwl_txq_alloc()
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.90be48017c1b.I880e451e137c5cd688d5f38b573b0dbf352762b3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Validate tid is less then MAX TID when it is used to access
corresponding arrays.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.cea75e1f57e7.I03bc0a81d2c1bdbf4784c12c4c62b8538892ccba@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the AP is an AP MLD, then we shouldn't track just the BSSID
but the MLD address. Just generally use ap_addr since it has
the BSSID in the non-MLD case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.b6a4f7edd10c.Ie5a8029ed686b9441620ba06596d430432f65559@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We skipped this in the past, but now we will need it for some
platforms. Implement loading the PHY filter configuration IDs
from the WPFC ACPI table. Note that the firmware must also be
aware of the right filter configuration IDs (they're just the
IDs of a filter configuration, not the actual configuration).
Remove the useless hardcoded zeroes while at it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.035026ea3169.I3a1fc1fe644fefa0d818ee1926c5fc331d68e8a3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
iwl_pcie_irq_rx_msix_handler()
rxq can be NULL only when trans_pcie->rxq is NULL and entry->entry
is zero. For the case when entry->entry is not equal to 0, rxq
won't be NULL even if trans_pcie->rxq is NULL. Modify checker to
check for trans_pcie->rxq.
Fixes: abc599efa67b ("iwlwifi: pcie: don't crash when rx queues aren't allocated in interrupt")
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.5a5eb3889a4a.I375a1d58f16b48cd2044e7b7caddae512d7c86fd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When the firmware misbehaves (according to the driver), we
often either ignore that, or WARN_ON, which is very noisy
but doesn't really help.
Add a little helper macro IWL_FW_CHECK() that can be used
in place of WARN_ON() in conditions, and make it take a
message that's printed in this case. We can also add more
behaviour to this in the future.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.2e12ac670cea.Ia0198036b7a626876d836bd41a4b2d2b1e65c5ca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The firmware technically only needs this when the link is
newly added, but it's much easier for debugging if it's
always available, so include it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.daecd0e626f7.I0f8a16a6d80a283c9f947c9bb0fc50a7c6853948@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When calling iwl_mvm_set_fw_qos_params() we explicitly pass
a pointer to the first array element, but the function will
treat it as an array. Simplify and clarify the code and pass
the array instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.6fb4a9743b1b.I801007d207f6539a9e0996366ec593e2038b1f90@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We have the data structure set up to store the parameters
per link, but weren't using them. Fix that and store them
in the right link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.332c4949a1be.Icae03975d578b0cc82279911a1ea7cbc313046d6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Again, during some (botched) FW restart scenarios we can end
up with a NULL link in the driver but mac80211 thinking all
is still going OK. If we try to TX at the same time, we can
crash there. Fix that by checking for a NULL link during TX.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.cee48479deec.I4eef58f7b67afafb7b3294adbeb6e0067b68419d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We've observed that in some botched firmware restart scenarios
when the firmware crashes again while we're reconfiguring, we
can hit NULL pointer crashes here. The underlying issue is the
botched restart which we need to fix separately, but until we
can do that, don't crash hard here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.e47b0192c78f.I67fa9f07cd1c8b3bdc8db25f5e31c1c680c49745@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
On fw error dump, dmesg prints FSEQ register data. Add 4
additional prints in order to match those being dumped
by Windows driver. Allows fw infra to correctly detect
version mismatch.
Signed-off-by: Ariel Malamud <ariel.malamud@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.f40dc9c810a8.I26227900d0b7e9a71fefe5cbf57cf6b46ee44413@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are evidently cases where the firmware completes the
reset but the interrupt isn't received correctly, so check
for the interrupt again after the timeout, and don't dump
the firmware error log if the right bit is set.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.00cc2d9b88c3.I429bfe800f17c624e50c0b0c10dd2cd7d885f199@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In mac80211, it's required that we pull from TXQs by calling
ieee80211_tx_dequeue() only with softirqs disabled. However,
in iwl_mvm_queue_state_change() we're often called with them
enabled, e.g. from flush if anything was flushed, triggering
a mac80211 warning.
Fix that by disabling the softirqs across the TX call.
Fixes: cfbc6c4c5b91 ("iwlwifi: mvm: support mac80211 TXQs model")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.0feef7fa81db.I4dd62542d955b40dd8f0af34fa4accb9d0d17c7e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We have this helper now instead of open-coding the check for
the dmi_tas_approved_list, so use it even here. It was added
for debugfs use, but it's better to be consistent.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.f3741f5cdef4.I5e0bf522189dc595ee38d05e93994211d32ec0f4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
iwl_acpi_get_wifi_pkg_range(), iwl_acpi_get_wifi_pkg() and
iwl_acpi_get_object() need not be exported etc., they're used
only within the same file. Make them static.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.e866032e4106.Ifede7f7c25b17a8215b154ce01da513b75384325@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If HT STBC is not supported, do not indicate support for VHT TX
STBC.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.b24b5fba6fab.I116617875eb4a9d520df23a8c49a6594f9d8b2c6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We can't just dereference the sband->iftype_data pointer,
that's an array so we need to access the right entry. Use
the previously introduced helper functions to do that.
There are also cases, e.g. when loading with disable_11ax=1,
where the pointer might be NULL but we still attempt to use
it, causing a crash.
Fixes: 529281bdf0fc ("iwlwifi: mvm: limit TLC according to our HE capabilities")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.a1f2b17ee39b.I8808120be744be8804815ce9e3e24ce6d2b424e3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
While vif pointers are protected by the corresponding "*active"
fields, static checkers can get confused sometimes. Add an explicit
check.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614154951.78749ae91fb5.Id3c05d13eeee6638f0930f750e93fb928d5c9dee@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The hardware isn't going to get fixed, so this mode cannot work
in the foreseeable future. Remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614145722.ddbc16c4affe.Ia6921e4b8a9624d4f57489ac775105ed0e400313@changeid
[restore original subject]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are some locking changes that will later otherwise
cause conflicts, so merge wireless into wireless-next to
avoid those.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-fixes-2023-06-16
This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clang's kernel Control Flow Integrity (kCFI) is a compiler-based
security mitigation that ensures the target of an indirect function call
matches the expected type of the call and trapping if they do not match
exactly. The warning -Wincompatible-function-pointer-types-strict aims
to catch these issues at compile time, which reveals:
drivers/hwtracing/coresight/coresight-dummy.c:53:12: error: incompatible function pointer types initializing 'int (*)(struct coresight_device *, struct perf_event *, enum cs_mode)' with an expression of type 'int (struct coresight_device *, struct perf_event *, u32)' (aka 'int (struct coresight_device *, struct perf_event *, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
53 | .enable = dummy_source_enable,
| ^~~~~~~~~~~~~~~~~~~
drivers/hwtracing/coresight/coresight-dummy.c:62:12: error: incompatible function pointer types initializing 'int (*)(struct coresight_device *, enum cs_mode, void *)' with an expression of type 'int (struct coresight_device *, u32, void *)' (aka 'int (struct coresight_device *, unsigned int, void *)') [-Werror,-Wincompatible-function-pointer-types-strict]
62 | .enable = dummy_sink_enable,
| ^~~~~~~~~~~~~~~~~
2 errors generated.
Commit 9fa3682869d4 ("coresight: Use enum type for cs_mode wherever
possible") updated the type of the mode parameter in the prototype but
this driver was not introduced until commit 9d3ba0b6c056 ("Coresight:
Add coresight dummy driver") and 'int' is ABI compatible with 'enum
cs_mode', so there is no warning from regular
-Wincompatible-function-pointer-types.
Adjust the type of the mode parameter in the callback implementations in
the coresight dummy driver to match the prototype, clearing up the
warning and avoiding kCFI failures at runtime.
Fixes: 9d3ba0b6c056 ("Coresight: Add coresight dummy driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230616-coresight-dummy-fix-kcfi-warnings-v1-1-c55c64f8f0f5@kernel.org
|
|
The imx6 PCI host controller suffers from a HW integration bug whereby
the MSI enable bit in the root port MSI capability enables/disables MSIs
interrupts for all downstream components in the PCI tree.
This requires, as implemented in
75cb8d20c112 ("PCI: imx: Enable MSI from downstream components")
that the root port MSI enable bit should be set in order for downstream
PCI devices MSIs to function.
The MSI enable bit programming might be lost during the suspend and
should be re-stored during resume.
Save the MSI control during suspend and restore it in resume.
Link: https://lore.kernel.org/r/1670479534-22154-1-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[lpieralisi@kernel.org: commit log]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
|
Starting from commit e45f243409db ("firmware: meson_sm:
populate platform devices from sm device tree data") pwrc
is probed successfully and disables unused pwr domains.
By A1 SoC family design, any TEE requires DMA pwr domain
always enabled.
Fixes: b3dde5013e13 ("soc: amlogic: Add support for Secure power domains controller")
Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230610090414.90529-1-avromanov@sberdevices.ru
[narmstrong: added fixes tag]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
The drv_reg field is initialized both in the DRV_PINGROUP_ENTRY_N/DRV_PINGROUP_ENTRY_Y
macros and in DRV_PINGROUP_Y. Since each pingroup expands both macros, the are
always duplicate and turning on -Woverride-init (which is disabled by default)
causes a huge amount of warnings like:
drivers/pinctrl/tegra/pinctrl-tegra234.c:1384:27: error: initialized field overwritten [-Werror=override-init]
1384 | #define DRV_PINGROUP_Y(r) ((r))
| ^
drivers/pinctrl/tegra/pinctrl-tegra234.c:1397:28: note: in expansion of macro 'DRV_PINGROUP_Y'
1397 | .drv_reg = DRV_PINGROUP_Y(r), \
| ^~~~~~~~~~~~~~
drivers/pinctrl/tegra/pinctrl-tegra234.c:1447:49: note: in expansion of macro 'DRV_PINGROUP_ENTRY_Y'
1447 | #define drive_soc_gpio08_pb0 DRV_PINGROUP_ENTRY_Y(0x500c, 12, 5, 20, 5, -1, -1, -1, -1, 0)
| ^~~~~~~~~~~~~~~~~~~~
...
Remove the intialization that is never used here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230616161603.1127687-1-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The new pinctrl driver selects GPIO_MLXBF3, but that can not be enabled yet because
the MELLANOX_PLATFORM symbol does not exist in the tree:
WARNING: unmet direct dependencies detected for GPIO_MLXBF3
Depends on [n]: GPIOLIB [=y] && PCI [=n] && (MELLANOX_PLATFORM [=n] && ARM64 [=y] || COMPILE_TEST [=y])
Selected by [y]:
- PINCTRL_MLXBF3 [=y] && PINCTRL [=y] && (MELLANOX_PLATFORM [=n] && ARM64 [=y] || COMPILE_TEST [=y])
As it turns out, the pinctlr driver still builds fine without this, so just
remove the select statement.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230619082104.699331-1-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
In case the QCA7000 is not available via SPI (e.g. in reset),
the driver will cause a high load. The reason for this is
that the synchronization is never finished and schedule()
is never called. Since the synchronization is not timing
critical, it's safe to drop this from the scheduling condition.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ARM exclusively uses GENERIC_IRQ_MULTI_HANDLER, so at some point
set_handle_irq() needs to be called to handle system-wide
interrupts.
For all DT-enabled boards, this call happens down in the
drivers/irqchip subsystem, after locating the target irqchip
driver from the device tree.
We still have a few instances of the boardfiles with machine
descriptors passing a machine-specific .handle_irq() to the
ARM kernel core.
Get rid of this by letting the few remaining machines consistently
call set_handle_irq() from the end of the .init_irq() callback
instead and diet down one member from the machine descriptor.
Cc: Marc Zyngier <maz@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Smatch complains that these error paths are missing cleanup:
drivers/mtd/mtdcore.c:983 mtd_otp_nvmem_add()
warn: missing unwind goto?
This needs to call nvmem_unregister(mtd->otp_user_nvmem) before
returning.
Fixes: 3b270fac8443 ("mtd: otp: Put factory OTP/NVRAM into the entropy pool")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/fe7ef901-9571-4c6e-a40e-449046efe2c6@moroto.mountain
|
