| Age | Commit message (Collapse) | Author |
|---|
|
It's only used inside drivers/base/dd.c
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Link: https://lore.kernel.org/r/20201123111938.18968-1-jwi@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These were just some minor typos that have crept in recently and are
easily fixed.
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201127104630.1839171-1-thierry.reding@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Device drivers usually depend on the fact that the devices that they
control are suspended in the same order that they were probed in. In
most cases this is already guaranteed via deferred probe.
However, there's one case where this can still break: if a device is
instantiated before a dependency (for example if it appears before the
dependency in device tree) but gets probed only after the dependency is
probed. Instantiation order would cause the dependency to get probed
later, in which case probe of the original device would be deferred and
the suspend/resume queue would get reordered properly. However, if the
dependency is provided by a built-in driver and the device depending on
that driver is controlled by a loadable module, which may only get
loaded after the root filesystem has become available, we can be faced
with a situation where the probe order ends up being different from the
suspend/resume order.
One example where this happens is on Tegra186, where the ACONNECT is
listed very early in device tree (sorted by unit-address) and depends on
BPMP (listed very late because it has no unit-address) for power domains
and clocks/resets. If the ACONNECT driver is built-in, there is no
problem because it will be probed before BPMP, causing a probe deferral
and that in turn reorders the suspend/resume queue. However, if built as
a module, it will end up being probed after BPMP, and therefore not
result in a probe deferral, and therefore the suspend/resume queue will
stay in the instantiation order. This in turn causes problems because
ACONNECT will be resumed before BPMP, which will result in a hang
because the ACONNECT's power domain cannot be powered on as long as the
BPMP is still suspended.
Fix this by always reordering devices on successful probe. This ensures
that the suspend/resume queue is always in probe order and hence meets
the natural expectations of drivers vs. their dependencies.
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Acked-by: Rafael. J. Wysocki <rafael@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201203175756.1405564-1-thierry.reding@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The struct device input to add_links() is not used for anything. So
delete it.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-18-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The current implementation of fw_devlink is very inefficient because it
tries to get away without creating fwnode links in the name of saving
memory usage. Past attempts to optimize runtime at the cost of memory
usage were blocked with request for data showing that the optimization
made significant improvement for real world scenarios.
We have those scenarios now. There have been several reports of boot
time increase in the order of seconds in this thread [1]. Several OEMs
and SoC manufacturers have also privately reported significant
(350-400ms) increase in boot time due to all the parsing done by
fw_devlink.
So this patch uses all the setup done by the previous patches in this
series to refactor fw_devlink to be more efficient. Most of the code has
been moved out of firmware specific (DT mostly) code into driver core.
This brings the following benefits:
- Instead of parsing the device tree multiple times during bootup,
fw_devlink parses each fwnode node/property only once and creates
fwnode links. The rest of the fw_devlink code then just looks at these
fwnode links to do rest of the work.
- Makes it much easier to debug probe issue due to fw_devlink in the
future. fw_devlink=on blocks the probing of devices if they depend on
a device that hasn't been added yet. With this refactor, it'll be very
easy to tell what that device is because we now have a reference to
the fwnode of the device.
- Much easier to add fw_devlink support to ACPI and other firmware
types. A refactor to move the common bits from DT specific code to
driver core was in my TODO list as a prerequisite to adding ACPI
support to fw_devlink. This series gets that done.
[1] - https://lore.kernel.org/linux-omap/ea02f57e-871d-cd16-4418-c1da4bbc4696@ti.com/
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-17-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The semantics of add_links() has changed from creating device link
between devices to creating fwnode links between fwnodes. So, update the
implementation of add_links() to match the new semantics.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-16-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The semantics of add_links() has changed from creating device link
between devices to creating fwnode links between fwnodes. So, update the
implementation of add_links() to match the new semantics.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-15-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To check if a device is still waiting for its supplier devices to be
added, we used to check if the devices is in a global
waiting_for_suppliers list. Since the global list will be deleted in
subsequent patches, this patch stops using this check.
Instead, this patch uses a more device specific check. It checks if the
device's fwnode has any fwnode links that haven't been converted to
device links yet.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-14-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This function is a wrapper around fwnode_operations.add_links().
This function parses each node in a fwnode tree and create fwnode links
for each of those nodes. The information for creating the fwnode links
(the supplier and consumer fwnode) is obtained by parsing the properties
in each of the fwnodes.
This function also ensures that no fwnode is parsed more than once by
marking the fwnodes as parsed.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-13-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change the meaning of fwnode_operations.add_links() to just create
fwnode links by parsing the properties of a given fwnode.
This patch doesn't actually make any code changes. To keeps things more
digestable, the actual functional changes come in later patches in this
series.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-12-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add fwnode_is_ancestor_of() helper function to check if a fwnode is an
ancestor of another fwnode.
Add fwnode_get_next_parent_dev() helper function that take as input a
fwnode and finds the closest ancestor fwnode that has a corresponding
struct device and returns that struct device.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-11-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
SYNC_STATE_ONLY device links only affect the behavior of sync_state()
callbacks. Specifically, they prevent sync_state() only callbacks from
being called on a device if one or more of its consumers haven't probed.
So, creating a SYNC_STATE_ONLY device link from an already probed
consumer is useless. So, don't allow creating such device links.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-10-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for creating supplier-consumer links between fwnodes. It is
intended for internal use the driver core and generic firmware support
code (eg. Device Tree, ACPI), so it is simple by design and the API
provided is limited.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-9-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are multiple locations in the kernel where a struct fwnode_handle
is initialized. Add fwnode_init() so that we have one way of
initializing a fwnode_handle.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-8-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 716a7a25969003d82ab738179c3f1068a120ed11.
The fw_devlink_pause/resume() APIs added by the commit being reverted
were a first cut attempt at optimizing boot time. But these APIs don't
fully solve the problem and are very fragile (can only be used for the
top level devices being added). This series replaces them with a much
better optimization that works for all device additions and also has the
benefit of reducing the complexity of the firmware (DT, EFI) specific
code and abstracting out common code to driver core.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-7-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 93d2e4322aa74c1ad1e8c2160608eb9a960d69ff.
The fw_devlink_pause/resume() optimization attempt is getting replaced
with a much more robust optimization by the end of this series. So, stop
using those APIs.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-6-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit fefcfc968723caf93318613a08e1f3ad07a6154f.
The reverted commit is fixing commit 716a7a259690 ("driver core:
fw_devlink: Add support for batching fwnode parsing"). Since the
original commit will be reverted, the fix can be reverted too.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-5-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
thread"
This reverts commit cec72f3efc6272420c2c2c699607f03d09b93e41.
Commit cec72f3efc62 ("driver core: Don't do deferred probe in parallel
with kernel_init thread") was fixing a commit 716a7a259690 ("driver
core: fw_devlink: Add support for batching fwnode parsing"). Since the
commit being fixed itself is going to be reverted, the fix can also be
reverted.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-4-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit ec7bd78498f29680f536451fbdf9464e851273ed.
This field rename was done to reuse defer_syc list head for multiple
lists. That's not needed anymore and this list head will only be used
for defer sync. So revert this patch to avoid conflicts with the other
reverts coming after this.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 2451e746478a6a6e981cfa66b62b791ca93b90c8.
fw_devlink_pause/resume() was an incomplete attempt at boot time
optimization. That's going to get replaced by a much better optimization
at the end of the series. Since fw_devlink_pause/resume() is going away,
changes made for that can also go away.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The device_links_purge() function (called from device_del()) tries to
remove the links.needs_suppliers list entry, but it's using
list_del(), hence it doesn't initialize after the removal. This is OK
for normal cases where device_del() is called via device_destroy().
However, it's not guaranteed that the device object will be really
deleted soon after device_del(). In a minor case like HD-audio codec
reconfiguration that re-initializes the device after device_del(), it
may lead to a crash by the corrupted list entry.
As a simple fix, replace list_del() with list_del_init() in order to
make the list intact after the device_del() call.
Fixes: e2ae9bcc4aaa ("driver core: Add support for linking devices during device addition")
Cc: <stable@vger.kernel.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20201208190326.27531-1-tiwai@suse.de
Cc: Saravana Kannan <saravanak@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
* arm64/for-next/fixes: (26 commits)
arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE
arm64: mte: Fix typo in macro definition
arm64: entry: fix EL1 debug transitions
arm64: entry: fix NMI {user, kernel}->kernel transitions
arm64: entry: fix non-NMI kernel<->kernel transitions
arm64: ptrace: prepare for EL1 irq/rcu tracking
arm64: entry: fix non-NMI user<->kernel transitions
arm64: entry: move el1 irq/nmi logic to C
arm64: entry: prepare ret_to_user for function call
arm64: entry: move enter_from_user_mode to entry-common.c
arm64: entry: mark entry code as noinstr
arm64: mark idle code as noinstr
arm64: syscall: exit userspace before unmasking exceptions
arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect()
arm64: pgtable: Fix pte_accessible()
ACPI/IORT: Fix doc warnings in iort.c
arm64/fpsimd: add <asm/insn.h> to <asm/kprobes.h> to fix fpsimd build
arm64: cpu_errata: Apply Erratum 845719 to KRYO2XX Silver
arm64: proton-pack: Add KRYO2XX silver CPUs to spectre-v2 safe-list
arm64: kpti: Add KRYO2XX gold/silver CPU cores to kpti safelist
...
# Conflicts:
# arch/arm64/include/asm/exception.h
# arch/arm64/kernel/sdei.c
|
|
* arm64/for-next/perf:
perf/imx_ddr: Add system PMU identifier for userspace
bindings: perf: imx-ddr: add compatible string
arm64: Fix build failure when HARDLOCKUP_DETECTOR_PERF is enabled
arm64: Enable perf events based hard lockup detector
perf/imx_ddr: Add stop event counters support for i.MX8MP
perf/smmuv3: Support sysfs identifier file
drivers/perf: hisi: Add identifier sysfs file
perf: remove duplicate check on fwnode
driver/perf: Add PMU driver for the ARM DMC-620 memory controller
|
|
* for-next/uaccess:
: uaccess routines clean-up and set_fs() removal
arm64: mark __system_matches_cap as __maybe_unused
arm64: uaccess: remove vestigal UAO support
arm64: uaccess: remove redundant PAN toggling
arm64: uaccess: remove addr_limit_user_check()
arm64: uaccess: remove set_fs()
arm64: uaccess cleanup macro naming
arm64: uaccess: split user/kernel routines
arm64: uaccess: refactor __{get,put}_user
arm64: uaccess: simplify __copy_user_flushcache()
arm64: uaccess: rename privileged uaccess routines
arm64: sdei: explicitly simulate PAN/UAO entry
arm64: sdei: move uaccess logic to arch/arm64/
arm64: head.S: always initialize PSTATE
arm64: head.S: cleanup SCTLR_ELx initialization
arm64: head.S: rename el2_setup -> init_kernel_el
arm64: add C wrappers for SET_PSTATE_*()
arm64: ensure ERET from kthread is illegal
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull iommu fix from Will Deacon:
"Fix interrupt table length definition for AMD IOMMU.
It's actually a fix for a fix, where the size of the interrupt
remapping table was increased but a related constant for the
size of the interrupt table was forgotten"
* tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
iommu/amd: Set DTE[IntTabLen] to represent 512 IRTEs
|
|
SCSI_CXGB4_ISCSI selects CHELSIO_T4. The latter depends on TLS || TLS=n, so
since 'select' does not check dependencies of the selected symbol,
SCSI_CXGB4_ISCSI should also depend on TLS || TLS=n.
This prevents the following kconfig warning and restricts SCSI_CXGB4_ISCSI
to 'm' whenever TLS=m.
WARNING: unmet direct dependencies detected for CHELSIO_T4
Depends on [m]: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_CHELSIO [=y] && PCI [=y] && (IPV6 [=y] || IPV6 [=y]=n) && (TLS [=m] || TLS [=m]=n)
Selected by [y]:
- SCSI_CXGB4_ISCSI [=y] && SCSI_LOWLEVEL [=y] && SCSI [=y] && PCI [=y] && INET [=y] && (IPV6 [=y] || IPV6 [=y]=n) && ETHERNET [=y]
Link: https://lore.kernel.org/r/20201208220505.24488-1-rdunlap@infradead.org
Fixes: 7b36b6e03b0d ("[SCSI] cxgb4i v5: iscsi driver")
Cc: Karen Xie <kxie@chelsio.com>
Cc: linux-scsi@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
More and more statements are being added to ufshcd_vops_device_reset() and
this function is being called from multiple locations in the driver.
Un-inline the function to allow the compiler to make better decisions.
Link: https://lore.kernel.org/r/20201208135635.15326-3-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
UFS 3.1 specification mentions that the WriteBooster flags listed below
will be set to their default values, i.e. disabled, after power cycle or
any type of reset event. Thus we need to reset the flag variables kept in
struct hba to align with the device status and ensure that
WriteBooster-related functions are configured properly after device reset.
Without this fix, WriteBooster will not be enabled successfully after by
ufshcd_wb_ctrl() after device reset because hba->wb_enabled remains true.
Flags required to be reset to default values:
- fWriteBoosterEn: hba->wb_enabled
- fWriteBoosterBufferFlushEn: hba->wb_buf_flush_enabled
- fWriteBoosterBufferFlushDuringHibernate: No variable mapped
Link: https://lore.kernel.org/r/20201208135635.15326-2-stanley.chu@mediatek.com
Fixes: 3d17b9b5ab11 ("scsi: ufs: Add write booster feature support")
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The validity of the ftdi CBUS GPIO is pretty hidden so far,
and finding out *why* some GPIOs don't work is sometimes
hard to identify. So let's help the user by displaying the
map of the CBUS pins that are valid for a GPIO.
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201204164739.781812-4-maz@kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[johan: demote to KERN_DEBUG, rephrase messages, drop ftx-prog warning]
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Now that gpiolib can track the validity of GPIO pins, there is no need
to check whether the line is valid in request().
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201204164739.781812-5-maz@kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[johan: amend commit message]
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Since it is pretty common for only some of the CBUS lines to be
valid as GPIO lines, let's report such validity to the rest of
the kernel.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201204164739.781812-3-maz@kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
When the kernel is compiled with allmodconfig, the following error is
reported:
In file included from drivers/scsi/ufs/ufs-mediatek-trace.h:36:0,
from drivers/scsi/ufs/ufs-mediatek.c:28:
./include/trace/define_trace.h:95:42: fatal error: ./ufs-mediatek-trace.h: No such file or directory
#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
The comment in include/trace/define_trace.h specifies that:
TRACE_INCLUDE_PATH: Note, the path is relative to define_trace.h, not the
file including it. Full path names for out of tree modules must be used.
So without "CFLAGS_ufs-mediatek.o := -I$(src)", the current directory "."
is "include/trace/", the relative path of ufs-mediatek-trace.h is
"../../drivers/scsi/ufs/".
Link: https://lore.kernel.org/r/20201209063144.1840-2-thunder.leizhen@huawei.com
Fixes: ca1bb061d644 ("scsi: ufs-mediatek: Introduce event_notify implementation")
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The "trigger_flags" variable needs to be signed for the error checking to
work.
Link: https://lore.kernel.org/r/X9DZH37bYPHwSQRP@mwanda
Fixes: aec93e8e2385 ("scsi: mpt3sas: Add persistent trigger pages support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let's set the 'use_gpio_descriptors' field so that we use the new way of
requesting the CS GPIOs in the core. This allows us to avoid having to
configure the CS pins in "output" mode with an 'output-enable' pinctrl
setting.
Cc: Akash Asthana <akashast@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20201204193540.3047030-4-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This is already handed by default in spi_setup() if the bits_per_word is
0, so just drop it to shave off a line.
Cc: Simon Glass <sjg@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20201204193540.3047030-3-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There isn't any need to overwrite the mode here in the driver with what
has been detected by the firmware, such as DT or ACPI. In fact, if we
use the SPI CS gpio descriptor feature we will overwrite the mode with
SPI_MODE_0 where it already contains SPI_MODE_0 and more importantly
SPI_CS_HIGH. Clearing the SPI_CS_HIGH bit causes the CS line to toggle
when the device is probed when it shouldn't change, confusing the driver
and making it fail to probe. Drop the assignment and let the spi core
take care of it.
Fixes: a17d94f0b6e1 ("mfd: Add ChromeOS EC SPI driver")
Cc: Simon Glass <sjg@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20201204193540.3047030-2-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Instead of submitting all SCSI commands submitted with scsi_execute() to a
SCSI device if rpm_status != RPM_ACTIVE, only submit RQF_PM (power
management requests) if rpm_status != RPM_ACTIVE. This patch makes the SCSI
core handle the runtime power management status (rpm_status) as it should
be handled.
Link: https://lore.kernel.org/r/20201209052951.16136-7-bvanassche@acm.org
Cc: Can Guo <cang@codeaurora.org>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Disable runtime power management during domain validation. Since a later
patch removes RQF_PREEMPT, set RQF_PM for domain validation commands such
that these are executed in the quiesced SCSI device state.
Link: https://lore.kernel.org/r/20201209052951.16136-6-bvanassche@acm.org
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Woody Suwalski <terraluna977@gmail.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Stan Johnson <userm57@yahoo.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This is another step that prepares for the removal of RQF_PREEMPT.
Link: https://lore.kernel.org/r/20201209052951.16136-5-bvanassche@acm.org
Cc: David S. Miller <davem@davemloft.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Can Guo <cang@codeaurora.org>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
RQF_PREEMPT is used for two different purposes in the legacy IDE code:
1. To mark power management requests.
2. To mark requests that should preempt another request. An (old)
explanation of that feature is as follows: "The IDE driver in the Linux
kernel normally uses a series of busywait delays during its
initialization. When the driver executes these busywaits, the kernel
does nothing for the duration of the wait. The time spent in these
waits could be used for other initialization activities, if they could
be run concurrently with these waits.
More specifically, busywait-style delays such as udelay() in module
init functions inhibit kernel preemption because the Big Kernel Lock is
held, while yielding APIs such as schedule_timeout() allow
preemption. This is true because the kernel handles the BKL specially
and releases and reacquires it across reschedules allowed by the
current thread.
This IDE-preempt specification requires that the driver eliminate these
busywaits and replace them with a mechanism that allows other work to
proceed while the IDE driver is initializing."
Since I haven't found an implementation of (2), do not set the PREEMPT flag
for sense requests. This patch causes sense requests to be postponed while
a drive is suspended instead of being submitted to ide_queue_rq().
If it would ever be necessary to restore the IDE PREEMPT functionality,
that can be done by introducing a new flag in struct ide_request.
Link: https://lore.kernel.org/r/20201209052951.16136-4-bvanassche@acm.org
Cc: David S. Miller <davem@davemloft.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Can Guo <cang@codeaurora.org>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Enable runtime PM auto-suspend by default for Intel host controllers.
Link: https://lore.kernel.org/r/20201207083120.26732-5-adrian.hunter@intel.com
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Intel controllers can end up in an unrecoverable state after a hibernate
exit error unless a full reset and restore is done before anything else.
Force that to happen.
Link: https://lore.kernel.org/r/20201207083120.26732-4-adrian.hunter@intel.com
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
->poweroff()
The expectation for suspend-to-disk is that devices will be powered-off, so
the UFS device should be put in PowerDown mode. If spm_lvl is not 5, then
that will not happen. Change the pm callbacks to force spm_lvl 5 for
suspend-to-disk poweroff.
Link: https://lore.kernel.org/r/20201207083120.26732-3-adrian.hunter@intel.com
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, ufshcd-pci is the only UFS driver with support for
suspend-to-disk PM callbacks (i.e. freeze/thaw/restore/poweroff). These
callbacks are set by the macro SET_SYSTEM_SLEEP_PM_OPS to the same
functions as system suspend/resume. That will work with spm_lvl 5 because
spm_lvl 5 will result in a full restore for the ->restore() callback. In
the absence of a full restore, the host controller registers will have
values set up by the restore kernel (the kernel that boots and loads the
restore image) which are not necessarily the same. However it turns out,
the only registers that sometimes need restore are the base address
registers. This has gone un-noticed because, depending on IOMMU settings,
the kernel can end up allocating the same addresses every time.
For Intel controllers, an spm_lvl other than 5 can be used, so to support
S4 (suspend-to-disk) with spm_lvl other than 5, restore the base address
registers.
Link: https://lore.kernel.org/r/20201207083120.26732-2-adrian.hunter@intel.com
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For some devices which need extra delay after VCC power down, VCC shall be
kept always-on in some MediaTek UFS platforms to ensure the stability of
such devices because the extra delay may not be enough in those platforms.
Link: https://lore.kernel.org/r/20201207054955.24366-3-stanley.chu@mediatek.com
Reviewed-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update driver version to 36.100.00.00
Link: https://lore.kernel.org/r/20201126094311.8686-9-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Introduce a flag "always_on" in struct ufs_vreg to allow vendors to keep
the regulator always-on.
Link: https://lore.kernel.org/r/20201207054955.24366-2-stanley.chu@mediatek.com
Reviewed-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If a firmware update adds support for the trigger pages, then the driver
should handle this by writing the existing trigger data from the driver's
internal data structure to the corresponding trigger pages in NVRAM.
Also handle the case where the trigger page capability is no longer present
after a firmware downgrade.
Link: https://lore.kernel.org/r/20201126094311.8686-8-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If RPMB is not provisioned, we may see RPMB failure after UFS
suspend/resume. Inject request_sense to clear uac in ufshcd reset flow.
Link: https://lore.kernel.org/r/20201201041402.3860525-1-jaegeuk@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Randall Huang <huangrandall@google.com>
Signed-off-by: Leo Liou <leoliou@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This page is used to store information about MPI (IOC Status & LogInfo)
triggers.
Driver Persistent Trigger Page-4 format:
-------------------------------------------------------
| 31 24 23 16 15 8 7 0| Byte
-------------------------------------------------------
| PageType | PageNumber | Reserved | PageVersion | 0x00
--------------------------------------------------------
| Reserved | ExtPageType | ExtPageLength | 0x04
--------------------------------------------------------
| Reserved | NumMpiTriggerEntries | 0x08
--------------------------------------------------------
| MPITriggerEntry[0] | 0x0C
--------------------------------------------------------
| … |
--------------------------------------------------------
| MPITriggerEntry[19] | 0xA4
--------------------------------------------------------
NumMpiTriggerEntries:
This field indicates number of MPI (IOC Status & LogInfo) trigger entries
stored in this page. Currently driver is supporting a maximum of 20-MPI
trigger entries.
MPITriggerEntry:
-----------------------------------------------------
| 31 16 15 0 |
-----------------------------------------------------
| Reserved | IOCStatus |
-----------------------------------------------------
| IOCLogInfo |
-----------------------------------------------------
IOCStatus => Status value from the IOC
IOCLogInfo => Specific value that supplements the IOCStatus.
Link: https://lore.kernel.org/r/20201126094311.8686-7-suganath-prabu.subramani@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
