summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-08-09Merge tag 'pm-5.3-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Revert a recent PCI power management change that caused problems to occur on multiple systems (Mika Westerberg)" * tag 'pm-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "PCI: Add missing link delays required by the PCIe spec"
2019-08-09Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "Fix a number of bugs in the ccp driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ccp - Ignore tag length when decrypting GCM ciphertext crypto: ccp - Add support for valid authsize values less than 16 crypto: ccp - Fix oops by properly managing allocated structures
2019-08-09iommu/vt-d: Fix possible use-after-free of private domainLu Baolu
Multiple devices might share a private domain. One real example is a pci bridge and all devices behind it. When remove a private domain, make sure that it has been detached from all devices to avoid use-after-free case. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Fixes: 942067f1b6b97 ("iommu/vt-d: Identify default domains replaced with private") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-09iommu/vt-d: Detach domain before using a private oneLu Baolu
When the default domain of a group doesn't work for a device, the iommu driver will try to use a private domain. The domain which was previously attached to the device must be detached. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Fixes: 942067f1b6b97 ("iommu/vt-d: Identify default domains replaced with private") Reported-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lkml.org/lkml/2019/8/2/1379 Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-09iommu/dma: Handle SG length overflow betterRobin Murphy
Since scatterlist dimensions are all unsigned ints, in the relatively rare cases where a device's max_segment_size is set to UINT_MAX, then the "cur_len + s_length <= max_len" check in __finalise_sg() will always return true. As a result, the corner case of such a device mapping an excessively large scatterlist which is mergeable to or beyond a total length of 4GB can lead to overflow and a bogus truncated dma_length in the resulting segment. As we already assume that any single segment must be no longer than max_len to begin with, this can easily be addressed by reshuffling the comparison. Fixes: 809eac54cdd6 ("iommu/dma: Implement scatterlist segment merging") Reported-by: Nicolin Chen <nicoleotsuka@gmail.com> Tested-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-09iommu/vt-d: Correctly check format of page table in debugfsLu Baolu
PASID support and enable bit in the context entry isn't the right indicator for the type of tables (legacy or scalable mode). Check the DMA_RTADDR_SMT bit in the root context pointer instead. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Sai Praneeth <sai.praneeth.prakhya@intel.com> Fixes: dd5142ca5d24b ("iommu/vt-d: Add debugfs support to show scalable mode DMAR table internals") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-09bcache: Revert "bcache: use sysfs_match_string() instead of ↵Coly Li
__sysfs_match_string()" This reverts commit 89e0341af082dbc170019f908846f4a424efc86b. In drivers/md/bcache/sysfs.c:bch_snprint_string_list(), NULL pointer at the end of list is necessary. Remove the NULL from last element of each lists will cause the following panic, [ 4340.455652] bcache: register_cache() registered cache device nvme0n1 [ 4340.464603] bcache: register_bdev() registered backing device sdk [ 4421.587335] bcache: bch_cached_dev_run() cached dev sdk is running already [ 4421.587348] bcache: bch_cached_dev_attach() Caching sdk as bcache0 on set 354e1d46-d99f-4d8b-870b-078b80dc88a6 [ 5139.247950] general protection fault: 0000 [#1] SMP NOPTI [ 5139.247970] CPU: 9 PID: 5896 Comm: cat Not tainted 4.12.14-95.29-default #1 SLE12-SP4 [ 5139.247988] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 04/18/2019 [ 5139.248006] task: ffff888fb25c0b00 task.stack: ffff9bbacc704000 [ 5139.248021] RIP: 0010:string+0x21/0x70 [ 5139.248030] RSP: 0018:ffff9bbacc707bf0 EFLAGS: 00010286 [ 5139.248043] RAX: ffffffffa7e432e3 RBX: ffff8881c20da02a RCX: ffff0a00ffffff04 [ 5139.248058] RDX: 3f00656863616362 RSI: ffff8881c20db000 RDI: ffffffffffffffff [ 5139.248075] RBP: ffff8881c20db000 R08: 0000000000000000 R09: ffff8881c20da02a [ 5139.248090] R10: 0000000000000004 R11: 0000000000000000 R12: ffff9bbacc707c48 [ 5139.248104] R13: 0000000000000fd6 R14: ffffffffc0665855 R15: ffffffffc0665855 [ 5139.248119] FS: 00007faf253b8700(0000) GS:ffff88903f840000(0000) knlGS:0000000000000000 [ 5139.248137] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5139.248149] CR2: 00007faf25395008 CR3: 0000000f72150006 CR4: 00000000007606e0 [ 5139.248164] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5139.248179] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5139.248193] PKRU: 55555554 [ 5139.248200] Call Trace: [ 5139.248210] vsnprintf+0x1fb/0x510 [ 5139.248221] snprintf+0x39/0x40 [ 5139.248238] bch_snprint_string_list.constprop.15+0x5b/0x90 [bcache] [ 5139.248256] __bch_cached_dev_show+0x44d/0x5f0 [bcache] [ 5139.248270] ? __alloc_pages_nodemask+0xb2/0x210 [ 5139.248284] bch_cached_dev_show+0x2c/0x50 [bcache] [ 5139.248297] sysfs_kf_seq_show+0xbb/0x190 [ 5139.248308] seq_read+0xfc/0x3c0 [ 5139.248317] __vfs_read+0x26/0x140 [ 5139.248327] vfs_read+0x87/0x130 [ 5139.248336] SyS_read+0x42/0x90 [ 5139.248346] do_syscall_64+0x74/0x160 [ 5139.248358] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 5139.248370] RIP: 0033:0x7faf24eea370 [ 5139.248379] RSP: 002b:00007fff82d03f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 5139.248395] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007faf24eea370 [ 5139.248411] RDX: 0000000000020000 RSI: 00007faf25396000 RDI: 0000000000000003 [ 5139.248426] RBP: 00007faf25396000 R08: 00000000ffffffff R09: 0000000000000000 [ 5139.248441] R10: 000000007c9d4d41 R11: 0000000000000246 R12: 00007faf25396000 [ 5139.248456] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000fff [ 5139.248892] Code: ff ff ff 0f 1f 80 00 00 00 00 49 89 f9 48 89 cf 48 c7 c0 e3 32 e4 a7 48 c1 ff 30 48 81 fa ff 0f 00 00 48 0f 46 d0 48 85 ff 74 45 <44> 0f b6 02 48 8d 42 01 45 84 c0 74 38 48 01 fa 4c 89 cf eb 0e The simplest way to fix is to revert commit 89e0341af082 ("bcache: use sysfs_match_string() instead of __sysfs_match_string()"). This bug was introduced in Linux v5.2, so this fix only applies to Linux v5.2 is enough for stable tree maintainer. Fixes: 89e0341af082 ("bcache: use sysfs_match_string() instead of __sysfs_match_string()") Cc: stable@vger.kernel.org Cc: Alexandru Ardelean <alexandru.ardelean@analog.com> Reported-by: Peifeng Lin <pflin@suse.com> Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-09omap-dma/omap_vout_vrfb: fix off-by-one fi valueHans Verkuil
The OMAP 4 TRM specifies that when using double-index addressing the address increases by the ES plus the EI value minus 1 within a frame. When a full frame is transferred, the address increases by the ES plus the frame index (FI) value minus 1. The omap-dma code didn't account for the 'minus 1' in the FI register. To get correct addressing, add 1 to the src_icg value. This was found when testing a hacked version of the media m2m-deinterlace.c driver on a Pandaboard. The only other source that uses this feature is omap_vout_vrfb.c, and that adds a + 1 when setting the dst_icg. This is a workaround for the broken omap-dma.c behavior. So remove the workaround at the same time that we fix omap-dma.c. I tested the omap_vout driver with a Beagle XM board to check that the '+ 1' in omap_vout_vrfb.c was indeed a workaround for the omap-dma bug. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Link: https://lore.kernel.org/r/952e7f51-f208-9333-6f58-b7ed20d2ea0b@xs4all.nl Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-09drm/i915: Use after free in error path in intel_vgpu_create_workload()Dan Carpenter
We can't free "workload" until after the printk or it's a use after free. Fixes: 2089a76ade90 ("drm/i915/gvt: Checking workload's gma earlier") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-08-09Merge tag 'drm-intel-fixes-2019-08-08' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.3-rc4: - Fix GLK DSI escape clock setting - Fix a memleak on HDCP revoked Ksv error path Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87pnlghz79.fsf@intel.com
2019-08-09Merge tag 'drm-misc-fixes-2019-08-08' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.3-rc4: - Suspend fix for rockchip - Fix unterminated strncpy cmdline mode parser Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ace294a6-6bb2-d9b1-695d-3260e1d60831@linux.intel.com
2019-08-09soundwire: fix regmap dependencies and align with other serial linksPierre-Louis Bossart
The existing code has a mixed select/depend usage which makes no sense. config SOUNDWIRE_BUS tristate select REGMAP_SOUNDWIRE config REGMAP_SOUNDWIRE tristate depends on SOUNDWIRE_BUS Let's remove one layer of Kconfig definitions and align with the solutions used by all other serial links. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190718230215.18675-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-08auxdisplay: charlcd: add include guard to charlcd.hMasahiro Yamada
Add a header include guard just in case. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-08-08auxdisplay: charlcd: move charlcd.h to drivers/auxdisplayMasahiro Yamada
This header is included in drivers/auxdisplay/. Make it a local header. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-08-08loop: set PF_MEMALLOC_NOIO for the worker threadMikulas Patocka
A deadlock with this stacktrace was observed. The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio shrinker and the shrinker depends on I/O completion in the dm-bufio subsystem. In order to fix the deadlock (and other similar ones), we set the flag PF_MEMALLOC_NOIO at loop thread entry. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f #13 [ffff8813dedfbec0] kthread at ffffffff810a8428 #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 PID: 14127 TASK: ffff881455749c00 CPU: 11 COMMAND: "loop1" #0 [ffff88272f5af228] __schedule at ffffffff8173f405 #1 [ffff88272f5af280] schedule at ffffffff8173fa27 #2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e #3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5 #4 [ffff88272f5af330] mutex_lock at ffffffff81742133 #5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio] #6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd #7 [ffff88272f5af470] shrink_zone at ffffffff811ad778 #8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34 #9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8 #10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3 #11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71 #12 [ffff88272f5af760] new_slab at ffffffff811f4523 #13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5 #14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b #15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3 #16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3 #17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs] #18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994 #19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs] #20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop] #21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop] #22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c #23 [ffff88272f5afec0] kthread at ffffffff810a8428 #24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-08usb: setup authorized_default attributes using usb_bus_notifyThiébaud Weksteen
Currently, the authorized_default and interface_authorized_default attributes for HCD are set up after the uevent has been sent to userland. This creates a race condition where userland may fail to access this file when processing the event. Move the appending of these attributes earlier relying on the usb_bus_notify dispatcher. Signed-off-by: Thiébaud Weksteen <tweek@google.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190806110050.38918-1-tweek@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-08dmaengine: stm32-mdma: Fix a possible null-pointer dereference in ↵Jia-Ju Bai
stm32_mdma_irq_handler() In stm32_mdma_irq_handler(), chan is checked on line 1368. When chan is NULL, it is still used on line 1369: dev_err(chan2dev(chan), "MDMA channel not initialized\n"); Thus, a possible null-pointer dereference may occur. To fix this bug, "dev_dbg(mdma2dev(dmadev), ...)" is used instead. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver") Link: https://lore.kernel.org/r/20190729020849.17971-1-baijiaju1990@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-08block: aoe: Fix kernel crash due to atomic sleep when exitingHe Zhe
Since commit 3582dd291788 ("aoe: convert aoeblk to blk-mq"), aoedev_downdev has had the possibility of sleeping and causing the following crash. BUG: scheduling while atomic: rmmod/2242/0x00000003 Modules linked in: aoe Preemption disabled at: [<ffffffffc01d95e5>] flush+0x95/0x4a0 [aoe] CPU: 7 PID: 2242 Comm: rmmod Tainted: G I 5.2.3 #1 Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.10.0025.030220091519 03/02/2009 Call Trace: dump_stack+0x4f/0x6a ? flush+0x95/0x4a0 [aoe] __schedule_bug.cold+0x44/0x54 __schedule+0x44f/0x680 schedule+0x44/0xd0 blk_mq_freeze_queue_wait+0x46/0xb0 ? wait_woken+0x80/0x80 blk_mq_freeze_queue+0x1b/0x20 aoedev_downdev+0x111/0x160 [aoe] flush+0xff/0x4a0 [aoe] aoedev_exit+0x23/0x30 [aoe] aoe_exit+0x35/0x948 [aoe] __se_sys_delete_module+0x183/0x210 __x64_sys_delete_module+0x16/0x20 do_syscall_64+0x4d/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f24e0043b07 Code: 73 01 c3 48 8b 0d 89 73 0b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 59 73 0b 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe18f7f1e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f24e0043b07 RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000555c3ecf87c8 RBP: 00007ffe18f7f1f0 R08: 0000000000000000 R09: 0000000000000000 R10: 00007f24e00b4ac0 R11: 0000000000000206 R12: 00007ffe18f7f238 R13: 00007ffe18f7f410 R14: 00007ffe18f80e73 R15: 0000555c3ecf8760 This patch, handling in the same way of pass two, unlocks the locks and restart pass one after aoedev_downdev is done. Fixes: 3582dd291788 ("aoe: convert aoeblk to blk-mq") Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-08pwm: Fallback to the static lookup-list when acpi_pwm_get failsHans de Goede
Commit 4a6ef8e37c4d ("pwm: Add support referencing PWMs from ACPI") made pwm_get unconditionally return the acpi_pwm_get return value if the device passed to pwm_get has an ACPI fwnode. But even if the passed in device has an ACPI fwnode, it does not necessarily have the necessary ACPI package defining its pwm bindings, especially since the binding / API of this ACPI package has only been introduced very recently. Up until now X86/ACPI devices which use a separate pwm controller for controlling their LCD screen's backlight brightness have been relying on the static lookup-list to get their pwm. pwm_get unconditionally returning the acpi_pwm_get return value breaks this, breaking backlight control on these devices. This commit fixes this by making pwm_get fall back to the static lookup-list if acpi_pwm_get returns -ENOENT. BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=96571 Reported-by: youling257@gmail.com Fixes: 4a6ef8e37c4d ("pwm: Add support referencing PWMs from ACPI") Cc: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-08-08usb: iowarrior: fix deadlock on disconnectOliver Neukum
We have to drop the mutex before we close() upon disconnect() as close() needs the lock. This is safe to do by dropping the mutex as intfdata is already set to NULL, so open() will fail. Fixes: 03f36e885fc26 ("USB: open disconnect race in iowarrior") Reported-by: syzbot+a64a382964bf6c71a9c0@syzkaller.appspotmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20190808092728.23417-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-08Revert "USB: rio500: simplify locking"Oliver Neukum
This reverts commit d710734b06770814de2bfa2819420fb5df7f3a81. This simplification causes a deadlock. Reported-by: syzbot+7bbcbe9c9ff0cd49592a@syzkaller.appspotmail.com Fixes: d710734b0677 ("USB: rio500: simplify locking") Cc: stable <stable@vger.kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20190808092854.23519-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-08drm/vmwgfx: fix memory leak when too many retries have occurredColin Ian King
Currently when too many retries have occurred there is a memory leak on the allocation for reply on the error return path. Fix this by kfree'ing reply before returning. Addresses-Coverity: ("Resource leak") Fixes: a9cd9c044aa9 ("drm/vmwgfx: Add a check to handle host message failure") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Deepak Rawat <drawat@vmware.com> Signed-off-by: Deepak Rawat <drawat@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2019-08-08Merge tag 'drm-fixes-5.3-2019-08-07' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes drm-fixes-5.3-2019-08-07: amdgpu: - Fixes VCN to handle the latest navi10 firmware - Fixes for fan control on navi10 - Properly handle SMU metrics table on navi10 - Fix a resume regression on Stoney amdkfd: - Revert new GWS ioctl. It's not ready. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190807184221.3323-1-alexander.deucher@amd.com
2019-08-08Merge tag 'drm/tegra/for-5.3-rc4' of ↵Dave Airlie
git://anongit.freedesktop.org/tegra/linux into drm-fixes drm/tegra: Fixes for v5.3-rc4 This contains a single fix for a regression introduced by a combination of a GPIO and a drm/tegra patch merged in v5.3-rc1. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190807140634.29166-1-thierry.reding@gmail.com
2019-08-07scsi: lpfc: Fix crash when cpu count is 1 and null irq affinity maskJames Smart
When a configurations runs with a single cpu (such as a kdump kernel), which causes the driver to request a single vector, when the driver subsequently requests an irq affinity mask, the mask comes back null. The driver currently does nothing in this scenario, which leaves mappings to hardware queues incomplete and crashes the system. Fix by recognizing the null mask and assigning the vector to the first cpu in the system. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-07Merge tag 'hwmon-for-v5.3-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fixes to lm75 and nct7802 drivers In the lm75 driver, fix TMP75B chip description to ensure correct initialization. In the nct7802 driver, fix in4 presence detection" * tag 'hwmon-for-v5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (lm75) Fixup tmp75b clr_mask hwmon: (nct7802) Fix wrong detection of in4 presence
2019-08-07hwmon: (lm75) Fixup tmp75b clr_maskIker Perez del Palomar Sustatxa
The configuration register of the tmp75b sensor is 16bit long, however the first byte is reserved, so there is not no need to take care of it. Because the order of the bytes is little endian and it is only necessary to write one byte, the desired bits must be shifted into a 8 bit range. Fixes: 39abe9d88b30 ("hwmon: (lm75) Add support for TMP75B") Cc: stable@vger.kernel.org Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk> Link: https://lore.kernel.org/r/20190801075324.4638-1-iker.perez@codethink.co.uk Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-08-07hwmon: (nct7802) Fix wrong detection of in4 presenceGuenter Roeck
The code to detect if in4 is present is wrong; if in4 is not present, the in4_input sysfs attribute is still present. In detail: - Ihen RTD3_MD=11 (VSEN3 present), everything is as expected (no bug). - If we have RTD3_MD!=11 (no VSEN3), we unexpectedly have a in4_input file under /sys and the "sensors" command displays in4_input. But as expected, we have no in4_min, in4_max, in4_alarm, in4_beep. Fix is_visible function to detect and report in4_input visibility as expected. Reported-by: Gilles Buloz <Gilles.Buloz@kontron.com> Cc: Gilles Buloz <Gilles.Buloz@kontron.com> Cc: stable@vger.kernel.org Fixes: 3434f37835804 ("hwmon: Driver for Nuvoton NCT7802Y") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-08-07IB/mlx5: Check the correct variable in error handling codeDan Carpenter
The code accidentally checks "event_sub" instead of "event_sub->eventfd". Fixes: 759738537142 ("IB/mlx5: Enable subscription for device events over DEVX") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190807123236.GA11452@mwanda Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-07RDMA/counter: Prevent QP counter binding if counters unsupportedMark Zhang
In case of rdma_counter_init() fails, counter allocation and QP bind should not be allowed. Fixes: 413d3347503b ("RDMA/counter: Add set/clear per-port auto mode support") Fixes: 1bd8e0a9d0fd ("RDMA/counter: Allow manual mode configuration support") Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190807101819.7581-1-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-07IB/mlx5: Fix implicit MR release flowYishai Hadas
Once implicit MR is being called to be released by ib_umem_notifier_release() its leaves were marked as "dying". However, when dereg_mr()->mlx5_ib_free_implicit_mr()->mr_leaf_free() is called, it skips running the mr_leaf_free_action (i.e. umem_odp->work) when those leaves were marked as "dying". As such ib_umem_release() for the leaves won't be called and their MRs will be leaked as well. When an application exits/killed without calling dereg_mr we might hit the above flow. This fatal scenario is reported by WARN_ON() upon mlx5_ib_dealloc_ucontext() as ibcontext->per_mm_list is not empty, the call trace can be seen below. Originally the "dying" mark as part of ib_umem_notifier_release() was introduced to prevent pagefault_mr() from returning a success response once this happened. However, we already have today the completion mechanism so no need for that in those flows any more. Even in case a success response will be returned the firmware will not find the pages and an error will be returned in the following call as a released mm will cause ib_umem_odp_map_dma_pages() to permanently fail mmget_not_zero(). Fix the above issue by dropping the "dying" from the above flows. The other flows that are using "dying" are still needed it for their synchronization purposes. WARNING: CPU: 1 PID: 7218 at drivers/infiniband/hw/mlx5/main.c:2004 mlx5_ib_dealloc_ucontext+0x84/0x90 [mlx5_ib] CPU: 1 PID: 7218 Comm: ibv_rc_pingpong Tainted: G E 5.2.0-rc6+ #13 Call Trace: uverbs_destroy_ufile_hw+0xb5/0x120 [ib_uverbs] ib_uverbs_close+0x1f/0x80 [ib_uverbs] __fput+0xbe/0x250 task_work_run+0x88/0xa0 do_exit+0x2cb/0xc30 ? __fput+0x14b/0x250 do_group_exit+0x39/0xb0 get_signal+0x191/0x920 ? _raw_spin_unlock_bh+0xa/0x20 ? inet_csk_accept+0x229/0x2f0 do_signal+0x36/0x5e0 ? put_unused_fd+0x5b/0x70 ? __sys_accept4+0x1a6/0x1e0 ? inet_hash+0x35/0x40 ? release_sock+0x43/0x90 ? _raw_spin_unlock_bh+0xa/0x20 ? inet_listen+0x9f/0x120 exit_to_usermode_loop+0x5c/0xc6 do_syscall_64+0x182/0x1b0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 81713d3788d2 ("IB/mlx5: Add implicit MR support") Link: https://lore.kernel.org/r/20190805083010.21777-1-leon@kernel.org Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-07libata: add SG safety checks in SFF pio transfersJens Axboe
Abort processing of a command if we run out of mapped data in the SG list. This should never happen, but a previous bug caused it to be possible. Play it safe and attempt to abort nicely if we don't have more SG segments left. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-07libata: have ata_scsi_rw_xlat() fail invalid passthrough requestsJens Axboe
For passthrough requests, libata-scsi takes what the user passes in as gospel. This can be problematic if the user fills in the CDB incorrectly. One example of that is in request sizes. For read/write commands, the CDB contains fields describing the transfer length of the request. These should match with the SG_IO header fields, but libata-scsi currently does no validation of that. Check that the number of blocks in the CDB for passthrough requests matches what was mapped into the request. If the CDB asks for more data then the validated SG_IO header fields, error it. Reported-by: Krishna Ram Prakash R <krp@gtux.in> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-07Revert "drm/amdkfd: New IOCTL to allocate queue GWS"Alex Deucher
This reverts commit 1a058c3376765ee31d65e28cbbb9d4ff15120056. This interface is still in too much flux. Revert until it's sorted out. Acked-by: Oak Zeng <Oak.Zeng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-07Revert "PCI: Add missing link delays required by the PCIe spec"Mika Westerberg
Commit c2bf1fc212f7 ("PCI: Add missing link delays required by the PCIe spec") turned out causing issues with some systems either by making them unresponsive or slowing down runtime and system wide resume of PCIe devices. While root cause for the unresponsiveness is still under investigation given the amount of issues reported better to revert it for now. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204413 Link: https://lore.kernel.org/linux-pci/SL2P216MB01878BBCD75F21D882AEEA2880C60@SL2P216MB0187.KORP216.PROD.OUTLOOK.COM/ Link: https://lore.kernel.org/linux-pci/2857501d-c167-547d-c57d-d5d24ea1f1dc@molgen.mpg.de/ Reported-by: Matthias Andree <matthias.andree@gmx.de> Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-06Revert "drm/amdgpu: fix transform feedback GDS hang on gfx10 (v2)"Marek Olšák
This reverts commit 9ed2c993d723129f85101e51b2ccc36ef5400a67. SET_CONFIG_REG writes to memory if register shadowing is enabled, causing a VM fault. NGG streamout is unstable anyway, so all UMDs should use legacy streamout. I think Mesa is the only driver using NGG streamout. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Le Ma <Le.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: "Yeah I should have sent a pull request last week, so there is a lot more here than usual: 1) Fix memory leak in ebtables compat code, from Wenwen Wang. 2) Several kTLS bug fixes from Jakub Kicinski (circular close on disconnect etc.) 3) Force slave speed check on link state recovery in bonding 802.3ad mode, from Thomas Falcon. 4) Clear RX descriptor bits before assigning buffers to them in stmmac, from Jose Abreu. 5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF loops, from Nishka Dasgupta. 6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean. 7) Need to hold sock across skb->destructor invocation, from Cong Wang. 8) IP header length needs to be validated in ipip tunnel xmit, from Haishuang Yan. 9) Use after free in ip6 tunnel driver, also from Haishuang Yan. 10) Do not use MSI interrupts on r8169 chips before RTL8168d, from Heiner Kallweit. 11) Upon bridge device init failure, we need to delete the local fdb. From Nikolay Aleksandrov. 12) Handle erros from of_get_mac_address() properly in stmmac, from Martin Blumenstingl. 13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef Kadlecsik. 14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with some devices, so revert. From Johannes Berg. 15) Fix deadlock in rxrpc, from David Howells. 16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue Haibing. 17) Fix mvpp2 crash on module removal, from Matteo Croce. 18) Fix race in genphy_update_link, from Heiner Kallweit. 19) bpf_xdp_adjust_head() stopped working with generic XDP when we fixes generic XDP to support stacked devices properly, fix from Jesper Dangaard Brouer. 20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from David Ahern. 21) Several memory leaks in new sja1105 driver, from Vladimir Oltean" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits) net: dsa: sja1105: Fix memory leak on meta state machine error path net: dsa: sja1105: Fix memory leak on meta state machine normal path net: dsa: sja1105: Really fix panic on unregistering PTP clock net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well net: dsa: sja1105: Fix broken learning with vlan_filtering disabled net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus() net: sched: sample: allow accessing psample_group with rtnl net: sched: police: allow accessing police->params with rtnl net: hisilicon: Fix dma_map_single failed on arm64 net: hisilicon: fix hip04-xmit never return TX_BUSY net: hisilicon: make hip04_tx_reclaim non-reentrant tc-testing: updated vlan action tests with batch create/delete net sched: update vlan action for batched events operations net: stmmac: tc: Do not return a fragment entry net: stmmac: Fix issues when number of Queues >= 4 net: stmmac: xgmac: Fix XGMAC selftests be2net: disable bh with spin_lock in be_process_mcc net: cxgb3_main: Fix a resource leak in a error path in 'init_one()' net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER ...
2019-08-06RISC-V: Remove per cpu clocksourceAtish Patra
There is only one clocksource in RISC-V. The boot cpu initializes that clocksource. No need to keep a percpu data structure. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-08-06net: dsa: sja1105: Really fix panic on unregistering PTP clockVladimir Oltean
The IS_ERR_OR_NULL(priv->clock) check inside sja1105_ptp_clock_unregister() is preventing cancel_delayed_work_sync from actually being run. Additionally, sja1105_ptp_clock_unregister() does not actually get run, when placed in sja1105_remove(). The DSA switch gets torn down, but the sja1105 module does not get unregistered. So sja1105_ptp_clock_unregister needs to be moved to sja1105_teardown, to be symmetrical with sja1105_ptp_clock_register which is called from the DSA sja1105_setup. It is strange to fix a "fixes" patch, but the probe failure can only be seen when the attached PHY does not respond to MDIO (issue which I can't pinpoint the reason to) and it goes away after I power-cycle the board. This time the patch was validated on a failing board, and the kernel panic from the fixed commit's message can no longer be seen. Fixes: 29dd908d355f ("net: dsa: sja1105: Cancel PTP delayed work on unregister") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as wellVladimir Oltean
It looks like the FDB dump taken from first-generation switches also contains information on whether entries are static or not. So use that instead of searching through the driver's tables. Fixes: d763778224ea ("net: dsa: sja1105: Implement is_static for FDB entries on E/T") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06net: dsa: sja1105: Fix broken learning with vlan_filtering disabledVladimir Oltean
When put under a bridge with vlan_filtering 0, the SJA1105 ports will flood all traffic as if learning was broken. This is because learning interferes with the rx_vid's configured by dsa_8021q as unique pvid's. So learning technically still *does* work, it's just that the learnt entries never get matched due to their unique VLAN ID. The setting that saves the day is Shared VLAN Learning, which on this switch family works exactly as desired: VLAN tagging still works (untagged traffic gets the correct pvid) and FDB entries are still populated with the correct contents including VID. Also, a frame cannot violate the forwarding domain restrictions enforced by its classified VLAN. It is just that the VID is ignored when looking up the FDB for taking a forwarding decision (selecting the egress port). This patch activates SVL, and the result is that frames with a learnt DMAC are no longer flooded in the scenario described above. Now exactly *because* SVL works as desired, we have to revisit some earlier patches: - It is no longer necessary to manipulate the VID of the 'bridge fdb {add,del}' command when vlan_filtering is off. This is because now, SVL is enabled for that case, so the actual VID does not matter*. - It is still desirable to hide dsa_8021q VID's in the FDB dump callback. But right now the dump callback should no longer hide duplicates (one per each front panel port's pvid, plus one for the VLAN that the CPU port is going to tag a TX frame with), because there shouldn't be any (the switch will match a single FDB entry no matter its VID anyway). * Not really... It's no longer necessary to transform a 'bridge fdb add' into 5 fdb add operations, but the user might still add a fdb entry with any vid, and all of them would appear as duplicates in 'bridge fdb show'. So force a 'bridge fdb add' to insert the VID of 0**, so that we can prune the duplicates at insertion time. ** The VID of 0 is better than 1 because it is always guaranteed to be in the ports' hardware filter. DSA also avoids putting the VID inside the netlink response message towards the bridge driver when we return this particular VID, which makes it suitable for FDB entries learnt with vlan_filtering off. Fixes: 227d07a07ef1 ("net: dsa: sja1105: Add support for traffic through standalone ports") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Georg Waibel <georg.waibel@sensor-technik.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus()Nishka Dasgupta
Each iteration of for_each_available_child_of_node() puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put() before the return. Additionally, the local variable ports in the function qca8k_setup_mdio_bus() takes the return value of of_get_child_by_name(), which gets a node but does not put it. If the function returns without putting ports, it may cause a memory leak. Hence put ports before the mid-loop return statement, and also outside the loop after its last usage in this function. Issues found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06net: hisilicon: Fix dma_map_single failed on arm64Jiangfeng Xiao
On the arm64 platform, executing "ifconfig eth0 up" will fail, returning "ifconfig: SIOCSIFFLAGS: Input/output error." ndev->dev is not initialized, dma_map_single->get_dma_ops-> dummy_dma_ops->__dummy_map_page will return DMA_ERROR_CODE directly, so when we use dma_map_single, the first parameter is to use the device of platform_device. Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06net: hisilicon: fix hip04-xmit never return TX_BUSYJiangfeng Xiao
TX_DESC_NUM is 256, in tx_count, the maximum value of mod(TX_DESC_NUM - 1) is 254, the variable "count" in the hip04_mac_start_xmit function is never equal to (TX_DESC_NUM - 1), so hip04_mac_start_xmit never return NETDEV_TX_BUSY. tx_count is modified to mod(TX_DESC_NUM) so that the maximum value of tx_count can reach (TX_DESC_NUM - 1), then hip04_mac_start_xmit can reurn NETDEV_TX_BUSY. Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06net: hisilicon: make hip04_tx_reclaim non-reentrantJiangfeng Xiao
If hip04_tx_reclaim is interrupted while it is running and then __napi_schedule continues to execute hip04_rx_poll->hip04_tx_reclaim, reentrancy occurs and oops is generated. So you need to mask the interrupt during the hip04_tx_reclaim run. The kernel oops exception stack is as follows: Unable to handle kernel NULL pointer dereference at virtual address 00000050 pgd = c0003000 [00000050] *pgd=80000000a04003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP ARM Modules linked in: hip04_eth mtdblock mtd_blkdevs mtd ohci_platform ehci_platform ohci_hcd ehci_hcd vfat fat sd_mod usb_storage scsi_mod usbcore usb_common CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.4.185 #1 Hardware name: Hisilicon A15 task: c0a250e0 task.stack: c0a00000 PC is at hip04_tx_reclaim+0xe0/0x17c [hip04_eth] LR is at hip04_tx_reclaim+0x30/0x17c [hip04_eth] pc : [<bf30c3a4>] lr : [<bf30c2f4>] psr: 600e0313 sp : c0a01d88 ip : 00000000 fp : c0601f9c r10: 00000000 r9 : c3482380 r8 : 00000001 r7 : 00000000 r6 : 000000e1 r5 : c3482000 r4 : 0000000c r3 : f2209800 r2 : 00000000 r1 : 00000000 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 32c5387d Table: 03d28c80 DAC: 55555555 Process swapper/0 (pid: 0, stack limit = 0xc0a00190) Stack: (0xc0a01d88 to 0xc0a02000) [<bf30c3a4>] (hip04_tx_reclaim [hip04_eth]) from [<bf30d2e0>] (hip04_rx_poll+0x88/0x368 [hip04_eth]) [<bf30d2e0>] (hip04_rx_poll [hip04_eth]) from [<c04c2d9c>] (net_rx_action+0x114/0x34c) [<c04c2d9c>] (net_rx_action) from [<c021eed8>] (__do_softirq+0x218/0x318) [<c021eed8>] (__do_softirq) from [<c021f284>] (irq_exit+0x88/0xac) [<c021f284>] (irq_exit) from [<c0240090>] (msa_irq_exit+0x11c/0x1d4) [<c0240090>] (msa_irq_exit) from [<c02677e0>] (__handle_domain_irq+0x110/0x148) [<c02677e0>] (__handle_domain_irq) from [<c0201588>] (gic_handle_irq+0xd4/0x118) [<c0201588>] (gic_handle_irq) from [<c0551700>] (__irq_svc+0x40/0x58) Exception stack(0xc0a01f30 to 0xc0a01f78) 1f20: c0ae8b40 00000000 00000000 00000000 1f40: 00000002 ffffe000 c0601f9c 00000000 ffffffff c0a2257c c0a22440 c0831a38 1f60: c0a01ec4 c0a01f80 c0203714 c0203718 600e0213 ffffffff [<c0551700>] (__irq_svc) from [<c0203718>] (arch_cpu_idle+0x20/0x3c) [<c0203718>] (arch_cpu_idle) from [<c025bfd8>] (cpu_startup_entry+0x244/0x29c) [<c025bfd8>] (cpu_startup_entry) from [<c054b0d8>] (rest_init+0xc8/0x10c) [<c054b0d8>] (rest_init) from [<c0800c58>] (start_kernel+0x468/0x514) Code: a40599e5 016086e2 018088e2 7660efe6 (503090e5) ---[ end trace 1db21d6d09c49d74 ]--- Kernel panic - not syncing: Fatal exception in interrupt CPU3: stopping CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D O 4.4.185 #1 Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06drm/amdgpu: pin the csb buffer on hw init for gfx v8Likun Gao
Without this pin, the csb buffer will be filled with inconsistent data after S3 resume. And that will causes gfx hang on gfxoff exit since this csb will be executed then. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Tested-by: Paul Gover <pmw.gover@yahoo.co.uk> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-06net: stmmac: tc: Do not return a fragment entryJose Abreu
Do not try to return a fragment entry from TC list. Otherwise we may not clean properly allocated entries. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06net: stmmac: Fix issues when number of Queues >= 4Jose Abreu
When queues >= 4 we use different registers but we were not subtracting the offset of 4. Fix this. Found out by Coverity. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06net: stmmac: xgmac: Fix XGMAC selftestsJose Abreu
Fixup the XGMAC selftests by correctly finishing the implementation of set_filter callback. Result: $ ethtool -t enp4s0 The test result is PASS The test extra info: 1. MAC Loopback 0 2. PHY Loopback -95 3. MMC Counters -95 4. EEE -95 5. Hash Filter MC 0 6. Perfect Filter UC 0 7. MC Filter 0 8. UC Filter 0 9. Flow Control 0 Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06Merge tag 'wireless-drivers-for-davem-2019-08-06' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.3 Second set of fixes for 5.3. Lots of iwlwifi fixes have accumulated which consists most of patches in this pull request. Only most notable iwlwifi fixes are listed below. mwifiex * fix a regression related to WPA1 networks since v5.3-rc1 iwlwifi * fix use-after-free issues * fix DMA mapping API usage errors * fix frame drop occurring due to reorder buffer handling in RSS in certain conditions * fix rate scale locking issues * disable TX A-MSDU on older NICs as it causes problems and was never supposed to be supported * new PCI IDs * GEO_TX_POWER_LIMIT API issue that many people were hitting ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 11:57:38 +0000