| Age | Commit message (Collapse) | Author |
|---|
|
For map scenario, rsp is freed in two places:
1. msg_open_conf frees rsp if rtrs_clt_request returns 0.
2. Otherwise, rsp is freed by the call sites of rtrs_clt_request.
Now, We'd like to control full lifecycle of rsp in rnbd_clt_map_device,
with that, it is feasible to pass rsp to rnbd_client_setup_device in
next commit.
For 1, it is possible to free rsp from the caller of send_usr_msg
because of the synchronization of iu->comp.wait. And we put iu later
in rnbd_clt_map_device to ensure order of release rsp and iu.
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220706133152.12058-3-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Let's open code it in rnbd_clt_map_device, then we can use information
from rsp to setup gendisk and request_queue in next commits. After that,
we can remove some members (wc, fua and max_hw_sectors etc) from struct
rnbd_clt_dev.
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220706133152.12058-2-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.
It is less verbose and it improves the semantic.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/7c4d3116ba843fc4a8ae557dd6176352a6cd0985.1656864320.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are 2 spelling mistakes in comments. Fix it.
Signed-off-by: Zhang Jiaming <jiaming@nfschina.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The block layer defaults the maximum segments to 128, which means
requests tend to get split around the 512KB depending on how many
pages can be merged. There's no such restriction in the raid5 code
so increase the limit to USHRT_MAX so that larger requests can be
sent as one.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a debug print for raid5_make_request() so that each request is
printed and add the logical sector number to the debug print in
__add_stripe_bio().
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
raid5_make_request() loops through every page in the request,
finds the appropriate stripe and adds the bio for that page in the
disk.
This causes a great deal of contention on the hash_lock and extra
work seeing each stripe must be found once for every data disk.
The number of times a stripe must be found can be reduced by pivoting
raid5_make_request() so that it loops through every stripe and then
loops through every disk in that stripe to see if the bio must be
added. This reduces the number of times the hash lock must be taken
by a factor equal to the number of data disks.
To accomplish this, the logical sectors that have already been added
must be tracked. Tracking them is done with a bitmap: the bits
for all pages are set at the start of the request and each bit
is cleared once the bio is added to a stripe.
Finding the next sector to be done is then just a call to
find_first_bit() so that sectors that have been done can simply be
skipped.
One minor downside is that the maximum sectors for a request must be
limited so that the bitmap can be appropriately sized on the stack.
This limit is arbitrarily chosen to be 256 stripe pages which works out
to 1MB if PAGE_SIZE == DEFAULT_STRIPE_SIZE. This doesn't actually
restrict the maximum request further seeing the default block queue
settings are used which restricts the number of segments to 128 (which
results in request sizes that are approximately 512KB).
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When testing if a previous stripe has had reshape expand past it, use
the earliest or latest logical sector in all the disks for that stripe
head. This will allow adding multiple disks at a time in a subesquent
patch.
To do this cleaner, refactor the check into a helper function called
stripe_ahead_of_reshape().
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Factor out two helper functions from add_stripe_bio(): one to check for
overlap (stripe_bio_overlaps()), and one to actually add the bio to the
stripe (__add_stripe_bio()). The latter function will always succeed.
This will be useful in the next patch so that overlap can be checked for
multiple disks before adding any
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When batching, every stripe head has to find the previous stripe head to
add to the batch list. This involves taking the hash lock which is
highly contended during IO.
Instead of finding the previous stripe_head each time, store a
reference to the previous stripe_head in a pointer so that it doesn't
require taking the contended lock another time.
The reference to the previous stripe must be released before scheduling
and waiting for work to get done. Otherwise, it can hold up
raid5_activate_delayed() and deadlock.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The for loop with retry label can be more cleanly expressed as a while
loop by moving the logical_sector increment into the success path.
No functional changes intended.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that prepare_to_wait() isn't in the way, move read_sequcount_begin()
into make_stripe_request().
No functional changes intended.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
prepare_to_wait() can be reasonably called after schedule instead of
setting a flag and preparing in the next loop iteration.
This means that prepare_to_wait() will be called before
read_seqcount_begin(), but there shouldn't be any reason that the order
matters here. On the first iteration of the loop prepare_to_wait() is
already called first.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Factor out the inner loop of raid5_make_request() into it's own helper
called make_stripe_request().
The helper returns a number of statuses: SUCCESS, RETRY,
SCHEDULE_AND_RETRY and FAIL. This makes the code a bit easier to
understand and allows the SCHEDULE_AND_RETRY path to be made common.
A context structure is added to contain do_flush. It will be used
more in subsequent patches for state that needs to be kept
outside the loop.
No functional changes intended. This will be cleaned up further in
subsequent patches to untangle the gen_lock and do_prepare logic
further.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Both uses of find_stripe() require a fairly complicated dance to
increment the reference count. Move this into a common find_get_stripe()
helper.
No functional changes intended.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
stripe_add_to_batch_list() is better done in the loop in make_request
instead of inside add_stripe_bio(). This is clearer and allows for
storing the batch_head state outside the loop in a subsequent patch.
The call to add_stripe_bio() in retry_aligned_read() is for read
and batching only applies to write. So it's impossible for batching
to happen at that call site.
No functional changes intended.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Break immediately if raid5_get_active_stripe() returns NULL and deindent
the rest of the loop. Annotate this check with an unlikely().
This makes the code easier to read and reduces the indentation level.
No functional changes intended.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are a few uses of an ugly ternary operator in raid5_make_request()
to check if a sector is a head of a reshape sector.
Factor this out into a simple helper called ahead_of_reshape().
No functional changes intended.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The check in raid5_make_request differs very slightly from the logic
that causes it to block lower down. This likely does not cause a bug
as the check is fuzzy anyway (as reshape may move on between the first
check and the subsequent check). However, make it consistent so it can
be cleaned up in a subsequent patch.
The condition which causes the schedule is:
!(mddev->reshape_backwards ? logical_sector < conf->reshape_progress :
logical_sector >= conf->reshape_progress) &&
(mddev->reshape_backwards ? logical_sector < conf->reshape_safe :
logical_sector >= conf->reshape_safe)
The condition that causes the early bailout is made to match this.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since the bug which commit 8b48ec23cc51a ("md: don't unregister sync_thread
with reconfig_mutex held") fixed is related with action_store path, other
callers which reap sync_thread didn't need to be changed.
Let's pull md_unregister_thread from md_reap_sync_thread, then fix previous
bug with belows.
1. unlock mddev before md_reap_sync_thread in action_store.
2. save reshape_position before unlock, then restore it to ensure position
not changed accidentally by others.
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Boot-time assembly of arrays with md= command-line arguments breaks when
CONFIG_BLOCK_LEGACY_AUTOLOAD is unset. md_setup_drive() in md-autodetect.c
calls blkdev_get_by_dev(), assuming this implicitly creates the block
device.
Fix this by attempting to md_alloc() the array first. As in the probe path,
ignore any error as failure is caught by blkdev_get_by_dev() anyway.
Signed-off-by: Chris Webb <chris@arachsys.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The mdadm test 07layouts randomly produces a kernel hung task deadlock.
The deadlock is caused by the suspend_lo/suspend_hi files being set by
the mdadm background process during reshape and not being cleared
because the process hangs. (Leaving aside the issue of the fragility of
freezing kernel tasks by buggy userspace processes...)
When the background mdadm process hangs it, is waiting (without a
timeout) on a change to the sync_completed file signalling that the
reshape has completed. The process is woken up a couple times when
the reshape finishes but it is woken up before MD_RECOVERY_RUNNING
is cleared so sync_completed_show() reports 0 instead of "none".
To fix this, notify the sysfs file in md_reap_sync_thread() after
MD_RECOVERY_RUNNING has been cleared. This wakes up mdadm and causes
it to continue and write to suspend_lo/suspend_hi to allow IO to
continue.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The 07layouts test in mdadm fails on some systems. The failure
presents itself as the backup file not being removed before the next
layout is grown into:
mdadm: /dev/md0: cannot create backup file /tmp/md-test-backup:
File exists
This is because the background mdadm process, which is responsible for
cleaning up this backup file gets into an infinite loop waiting for
the reshape to start. mdadm checks the mdstat file if a reshape is
going and, if it is not, it waits for an event on the file or times
out in 5 seconds. On faster machines, the reshape may complete before
the 5 seconds times out, and thus the background mdadm process loops
waiting for a reshape to start that has already occurred.
mdadm reads the mdstat file to start, but mdstat does not report that the
reshape has begun, even though it has indeed begun. So the mdstat_wait()
call (in mdadm) which polls on the mdstat file won't ever return until
timing out.
The reason mdstat reports the reshape has started is due to an issue
in status_resync(). recovery_active is subtracted from curr_resync which
will result in a value of zero for the first chunk of reshaped data, and
the resulting read will report no reshape in progress.
To fix this, if "resync - recovery_active" is an overloaded value, force
the value to be MD_RESYNC_ACTIVE so the code reports a resync in progress.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Comments in the code document special values used for
mddev->curr_resync. Make this clearer by using an enum to label these
values.
The only functional change is a couple places use the wrong comparison
operator that implied 3 is another special value. They are all
fixed to imply that 3 or greater is an active resync.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
radix_tree_lookup_slot() and radix_tree_replace_slot() API expect the
slot returned and looked up to be marked with __rcu. Otherwise
sparse warnings are generated:
drivers/md/raid5-cache.c:2939:23: warning: incorrect type in
assignment (different address spaces)
drivers/md/raid5-cache.c:2939:23: expected void **pslot
drivers/md/raid5-cache.c:2939:23: got void [noderef] __rcu **
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A NULL pointer dereferlence on conf->log is seen randomly with
the mdadm test 21raid5cache. Kasan reporst:
BUG: KASAN: null-ptr-deref in r5l_reclaimable_space+0xf5/0x140
Read of size 8 at addr 0000000000000860 by task md0_reclaim/3086
Call Trace:
dump_stack_lvl+0x5a/0x74
kasan_report.cold+0x5f/0x1a9
__asan_load8+0x69/0x90
r5l_reclaimable_space+0xf5/0x140
r5l_do_reclaim+0xf4/0x5e0
r5l_reclaim_thread+0x69/0x3b0
md_thread+0x1a2/0x2c0
kthread+0x177/0x1b0
ret_from_fork+0x22/0x30
This is caused by conf->log being cleared in r5l_exit_log() before
stopping the reclaim thread.
To fix this, clear conf->log after the reclaim_thread is unregistered
and after flushing disable_writeback_work.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The only place that uses RCU to access conf->log is in
r5l_log_disk_error(). This function is mostly used in the IO path
and once with mddev_lock() held in raid5_change_consistency_policy().
It is known that the IO will be suspended before the log is freed and
r5l_log_exit() is called with the mddev_lock() held.
This should mean that conf->log can not be freed while the function is
being called, so the RCU protection is not necessary. Drop the
rcu_read_lock() as well as the synchronize_rcu() and
rcu_assign_pointer() usage.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The mddev->lock spinlock doesn't protect against the removal of
conf->log in r5l_exit_log() so conf->log may be freed before it
is used.
To fix this, take the mddev_lock() insteaad of the mddev->lock spinlock.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The raid5-cache code relies on there being no IO in flight when
log_exit() is called. There are two places where this is not
guaranteed so add mddev_suspend() and mddev_resume() calls to these
sites.
The site in raid5_change_consistency_policy() is in the error path,
and another similar call site already has suspend/resume calls just
below it; so it should be equally safe to make that change here.
There is one remaining site in raid5_remove_disk() that we call log_exit()
without suspending the array. Unfortunately, as the comment stated, we
cannot call mddev_suspend from raid5d.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ppl_handle_flush_request() takes an struct r5log argument but doesn't
use it. It has no buisiness taking this argument as it is only used
by raid5-cache and has no way to derference it anyway. Remove
the argument.
No functional changes intended.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
extern is not necessary and recommended against when defining prototype
functions in headers. checkpatch.pl complains about these. So remove
them.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We usually do all our bitmap IO in units of PAGE_SIZE.
With very small or oddly sized external meta data, or with
PAGE_SIZE != 4k, it can happen that our last on-disk bitmap page
is not fully PAGE_SIZE aligned, so we may need to adjust the size
of the IO.
We used to do that with
min_t(unsigned int, PAGE_SIZE,
last_allowed_sector - current_offset);
And for just the right diff, (unsigned int)(diff) will result in 0.
A bio of length 0 will correctly be rejected with an IO error
(and some scary WARN_ON_ONCE()) by the scsi layer.
Do the calculation properly.
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220622204932.196830-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The commit a1a2b7125e10 ("of/platform: Drop static setup of IRQ
resource from DT core") stopped IRQ resources being available as
platform resources. This broke the sanity check for the expected
number of resources in the Marvell SATA driver which expected two
resources, the IO memory and the interrupt.
Change the sanity check to only expect the IO memory.
Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Fixes: a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core")
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Fix Sparse warnings with randomizd kstack (GONG, Ruiqi)
- Replace uintptr_t with unsigned long in usercopy (Jason A. Donenfeld)
- Fix Clang -Wforward warning in LKDTM (Justin Stitt)
- Fix comment to correctly refer to STRICT_DEVMEM (Lukas Bulwahn)
- Introduce dm-verity binding logic to LoadPin LSM (Matthias Kaehlcke)
- Clean up warnings and overflow and KASAN tests (Kees Cook)
* tag 'hardening-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
dm: verity-loadpin: Drop use of dm_table_get_num_targets()
kasan: test: Silence GCC 12 warnings
drivers: lkdtm: fix clang -Wformat warning
x86: mm: refer to the intended config STRICT_DEVMEM in a comment
dm: verity-loadpin: Use CONFIG_SECURITY_LOADPIN_VERITY for conditional compilation
LoadPin: Enable loading from trusted dm-verity devices
dm: Add verity helpers for LoadPin
stack: Declare {randomize_,}kstack_offset to fix Sparse warnings
lib: overflow: Do not define 64-bit tests on 32-bit
MAINTAINERS: Add a general "kernel hardening" section
usercopy: use unsigned long instead of uintptr_t
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Refactor DM core's mempool allocation so that it clearer by not being
split acorss files.
- Improve DM core's BLK_STS_DM_REQUEUE and BLK_STS_AGAIN handling.
- Optimize DM core's more common bio splitting by eliminating the use
of bio cloning with bio_split+bio_chain. Shift that cloning cost to
the relatively unlikely dm_io requeue case that only occurs during
error handling. Introduces dm_io_rewind() that will clone a bio that
reflects the subset of the original bio that must be requeued.
- Remove DM core's dm_table_get_num_targets() wrapper and audit all
dm_table_get_target() callers.
- Fix potential for OOM with DM writecache target by setting a default
MAX_WRITEBACK_JOBS (set to 256MiB or 1/16 of total system memory,
whichever is smaller).
- Fix DM writecache target's stats that are reported through
DM-specific table info.
- Fix use-after-free crash in dm_sm_register_threshold_callback().
- Refine DM core's Persistent Reservation handling in preparation for
broader work Mike Christie is doing to add compatibility with
Microsoft Windows Failover Cluster.
- Fix various KASAN reported bugs in the DM raid target.
- Fix DM raid target crash due to md_handle_request() bio splitting
that recurses to block core without properly initializing the bio's
bi_dev.
- Fix some code comment typos and fix some Documentation formatting.
* tag 'for-6.0/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (29 commits)
dm: fix dm-raid crash if md_handle_request() splits bio
dm raid: fix address sanitizer warning in raid_resume
dm raid: fix address sanitizer warning in raid_status
dm: Start pr_preempt from the same starting path
dm: Fix PR release handling for non All Registrants
dm: Start pr_reserve from the same starting path
dm: Allow dm_call_pr to be used for path searches
dm: return early from dm_pr_call() if DM device is suspended
dm thin: fix use-after-free crash in dm_sm_register_threshold_callback
dm writecache: count number of blocks discarded, not number of discard bios
dm writecache: count number of blocks written, not number of write bios
dm writecache: count number of blocks read, not number of read bios
dm writecache: return void from functions
dm kcopyd: use __GFP_HIGHMEM when allocating pages
dm writecache: set a default MAX_WRITEBACK_JOBS
Documentation: dm writecache: Render status list as list
Documentation: dm writecache: add blank line before optional parameters
dm snapshot: fix typo in snapshot_map() comment
dm raid: remove redundant "the" in parse_raid_params() comment
dm cache: fix typo in 2 comment blocks
...
|
|
In case push_rcu() and related functions are buggy, there's a
WARN_ON(len >= 128), which the selftest tries to hit by being tricky. In
case it is hit, we shouldn't corrupt the kernel's stack, though;
otherwise it may be hard to even receive the report that it's buggy. So
conditionalize the stack write based on that WARN_ON()'s return value.
Note that this never *actually* happens anyway. The WARN_ON() in the
first place is bounded by IS_ENABLED(DEBUG), and isn't expected to ever
actually hit. This is just a debugging sanity check.
Additionally, hoist the constant 128 into a named enum,
MAX_ALLOWEDIPS_BITS, so that it's clear why this value is chosen.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/all/CAHk-=wjJZGA6w_DxA+k7Ejbqsq+uGK==koPai3sqdsfJqemvag@mail.gmail.com/
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using msleep() is problematic because it's compared against
ratelimiter.c's ktime_get_coarse_boottime_ns(), which means on systems
with slow jiffies (such as UML's forced HZ=100), the result is
inaccurate. So switch to using schedule_hrtimeout().
However, hrtimer gives us access only to the traditional posix timers,
and none of the _COARSE variants. So now, rather than being too
imprecise like jiffies, it's too precise.
One solution would be to give it a large "range" value, but this will
still fire early on a loaded system. A better solution is to align the
timeout to the actual coarse timer, and then round up to the nearest
tick, plus change.
So add the timeout to the current coarse time, and then
schedule_hrtimer() until the absolute computed time.
This should hopefully reduce flakes in CI as well. Note that we keep the
retry loop in case the entire function is running behind, because the
test could still be scheduled out, by either the kernel or by the
hypervisor's kernel, in which case restarting the test and hoping to not
be scheduled out still helps.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull block updates from Jens Axboe:
- Improve the type checking of request flags (Bart)
- Ensure queue mapping for a single queues always picks the right queue
(Bart)
- Sanitize the io priority handling (Jan)
- rq-qos race fix (Jinke)
- Reserved tags handling improvements (John)
- Separate memory alignment from file/disk offset aligment for O_DIRECT
(Keith)
- Add new ublk driver, userspace block driver using io_uring for
communication with the userspace backend (Ming)
- Use try_cmpxchg() to cleanup the code in various spots (Uros)
- Finally remove bdevname() (Christoph)
- Clean up the zoned device handling (Christoph)
- Clean up independent access range support (Christoph)
- Clean up and improve block sysfs handling (Christoph)
- Clean up and improve teardown of block devices.
This turns the usual two step process into something that is simpler
to implement and handle in block drivers (Christoph)
- Clean up chunk size handling (Christoph)
- Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
Ming, Sebastian, Yang, Ying)
* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
ublk_drv: fix double shift bug
ublk_drv: make sure that correct flags(features) returned to userspace
ublk_drv: fix error handling of ublk_add_dev
ublk_drv: fix lockdep warning
block: remove __blk_get_queue
block: call blk_mq_exit_queue from disk_release for never added disks
blk-mq: fix error handling in __blk_mq_alloc_disk
ublk: defer disk allocation
ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
ublk: cleanup ublk_ctrl_uring_cmd
ublk: simplify ublk_ch_open and ublk_ch_release
ublk: remove the empty open and release block device operations
ublk: remove UBLK_IO_F_PREFLUSH
ublk: add a MAINTAINERS entry
block: don't allow the same type rq_qos add more than once
mmc: fix disk/queue leak in case of adding disk failure
ublk_drv: fix an IS_ERR() vs NULL check
ublk: remove UBLK_IO_F_INTEGRITY
ublk_drv: remove unneeded semicolon
...
|
|
i.MX generic MU supports MU-A/B reset feature.
When stop/start remotecore, MU is not reset. So when Linux stop
remotecore, the MU-B side BCR may contain valid configuration,
because MU-B is not reset. So when linux start Mcore
again and notify Mcore, Mcore is not ready to handle MU interrupt
and cause issues. So need reset MU when stop Mcore.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
rx_callback is a standard mailbox callback mechanism and could cover the
function of proprietary cmdq_task_cb, so use the standard one instead of
the proprietary one. Client driver has changed to use standard
rx_callback, so remove proprietary cmdq_task_cb.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
- XP-PEN Deco L support (José Expósito)
|
|
|
|
- support for Elan eKTH6915 touchscreens (Douglas Anderson)
|
|
|
|
|
|
- support for AMD SOCs using SFH1.1 memory access (Basavaraj Natikar)
|
|
* clk-allwinner:
clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS
clk: sunxi: Do not select the PRCM MFD
clk: sunxi: Limit legacy clocks to 32-bit ARM
clk: sunxi-ng: Deduplicate ccu_clks arrays
|
|
into clk-next
* clk-renesas: (22 commits)
clk: renesas: rcar-gen4: Fix initconst confusion for cpg_pll_config
clk: renesas: r9a07g043: Add support for RZ/Five SoC
dt-bindings: clock: r9a07g043-cpg: Add Renesas RZ/Five CPG Clock and Reset Definitions
clk: renesas: r8a779f0: Add HSCIF clocks
clk: renesas: r8a779f0: Add PCIe clocks
clk: renesas: r8a779f0: Add Z0 and Z1 clock support
dt-bindings: clock: renesas,rzg2l: Simplify header file references
clk: renesas: rza1: Remove struct rz_cpg
clk: renesas: r8a7779: Remove struct r8a7779_cpg
clk: renesas: r8a7778: Remove struct r8a7778_cpg
clk: renesas: sh73a0: Remove sh73a0_cpg.reg
clk: renesas: r8a7740: Remove r8a7740_cpg.reg
clk: renesas: r8a73a4: Remove r8a73a4_cpg.reg
clk: renesas: r8a779f0: Add SDHI0 clock
clk: renesas: r8a779f0: Add thermal clock
clk: renesas: rzg2l: Fix reset status function
clk: renesas: r9a06g032: Fix UART clkgrp bitsel
clk: renesas: r9a06g032: Drop some unused fields
clk: renesas: r9a09g011: Add WDT clock and reset entries
clk: renesas: r9a09g011: Add PFC clock and reset entries
...
* clk-spreadtrum:
clk: sprd: Add dt-bindings include file for UMS512
dt-bindings: clk: sprd: Add bindings for ums512 clock controller
* clk-imx:
clk: imx: clk-fracn-gppll: Add more freq config for video pll
clk: imx: clk-fracn-gppll: correct rdiv
clk: imx: clk-fracn-gppll: Return rate in rate table properly in ->recalc_rate()
clk: imx: clk-fracn-gppll: fix mfd value
clk: imx93: Correct the edma1's parent clock
clk: imx93: correct nic_media parent
clk: imx93: use adc_root as the parent clock of adc1
* clk-qcom: (62 commits)
clk: qcom: gcc-msm8994: use parent_hws for gpll0/4
clk: qcom: clk-rpm: convert to parent_data API
dt-bindings: clock: fix wrong clock documentation for qcom,rpmcc
clk: qcom: gcc-msm8939: Add missing USB HS system clock frequencies
clk: qcom: gcc-msm8939: Add missing MDSS MDP clock frequencies
clk: qcom: gcc-msm8939: Add missing CAMSS CPP clock frequencies
clk: qcom: gcc-msm8939: Fix venus0_vcodec0_clk frequency definitions
clk: qcom: gcc-msm8939: Add missing CAMSS CCI bus clock
clk: qcom: gcc-msm8939: Fix weird field spacing in ftbl_gcc_camss_cci_clk
clk: qcom: gdsc: Bump parent usage count when GDSC is found enabled
clk: qcom: Drop mmcx gdsc supply for dispcc and videocc
clk: qcom: fix build error initializer element is not constant
dt-bindings: clock: qcom,gcc-msm8996: add more GCC clock sources
clk: qcom: add support for SM8350 DISPCC
clk: qcom: add support for SM8350 GPUCC
clk: qcom: add camera clock controller driver for SM8450 SoC
clk: qcom: clk-alpha-pll: add Rivian EVO PLL configuration interfaces
clk: qcom: clk-alpha-pll: add Lucid EVO PLL configuration interfaces
clk: qcom: clk-alpha-pll: limit exported symbols to GPL licensed code
clk: qcom: clk-alpha-pll: fix clk_trion_pll_configure description
...
|
|
into clk-next
- Remove allwinner workaround logic/compatible in fixed factor code
- MediaTek clk driver cleanups
- Add reset support to more MediaTek clk drivers
- devm helpers for clk_get() + clk_prepare() and clk_enable()
* clk-basic:
clk: fixed-factor: Introduce *clk_hw_register_fixed_factor_parent_hw()
clk: mux: Introduce devm_clk_hw_register_mux_parent_hws()
clk: divider: Introduce devm_clk_hw_register_divider_parent_hw()
dt-bindings: clock: fixed-factor: Drop Allwinner A10 compatible
clk: fixed: Remove Allwinner A10 special-case logic
* clk-mtk:
clk: mediatek: reset: Add infra_ao reset support for MT8186
dt-bindings: arm: mediatek: Add #reset-cells property for MT8186
dt-bindings: reset: mediatek: Add infra_ao reset index for MT8186
clk: mediatek: reset: Add infra_ao reset support for MT8192/MT8195
dt-bindings: reset: mediatek: Add infra_ao reset index for MT8192/MT8195
dt-bindings: arm: mediatek: Add #reset-cells property for MT8192/MT8195
clk: mediatek: reset: Add reset support for simple probe
clk: mediatek: reset: Add new register reset function with device
clk: mediatek: reset: Change return type for clock reset register function
clk: mediatek: reset: Support inuput argument index mode
clk: mediatek: reset: Support nonsequence base offsets of reset registers
clk: mediatek: reset: Revise structure to control reset register
clk: mediatek: reset: Merge and revise reset register function
clk: mediatek: reset: Extract common drivers to update function
clk: mediatek: reset: Refine and reorder functions in reset.c
clk: mediatek: reset: Fix written reset bit offset
clk: mediatek: reset: Add reset.h
clk: mediatek: Delete MT8192 msdc gate
dt-bindings: ARM: Mediatek: Remove msdc binding of MT8192 clock
* clk-devm-enable:
clk: Remove never used devm_clk_*unregister()
clk: Fix pointer casting to prevent oops in devm_clk_release()
clk: meson: axg-audio: Don't duplicate devm_clk_get_enabled()
clk: Provide new devm_clk helpers for prepared and enabled clocks
clk: generalize devm_clk_get() a bit
clk: Improve documentation for devm_clk_get() and its optional variant
* clk-ti-dt:
clk: ti: Stop using legacy clkctrl names for omap4 and 5
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These start a rework of the handling of trip points in the thermal
core, improve the cpufreq/devfreq cooling device handling, update some
thermal control drivers and the tmon utility and clean up code.
Specifics:
- Consolidate the thermal core code by beginning to move the thermal
trip structure from the thermal OF code as a generic structure to
be used by the different sensors when registering a thermal zone
(Daniel Lezcano).
- Make per cpufreq / devfreq cooling device ops instead of using a
global variable, fix comments and rework the trace information
(Lukasz Luba).
- Add the include/dt-bindings/thermal.h under the area covered by the
thermal maintainer in the MAINTAINERS file (Lukas Bulwahn).
- Improve the error output by giving the sensor identification when a
thermal zone failed to initialize, the DT bindings by changing the
positive logic and adding the r8a779f0 support on the rcar3
(Wolfram Sang).
- Convert the QCom tsens DT binding to the dtsformat format
(Krzysztof Kozlowski).
- Remove the pointless get_trend() function in the QCom, Ux500 and
tegra thermal drivers, along with the unused DROP_FULL and
RAISE_FULL trends definitions. Simplify the code by using clamp()
macros (Daniel Lezcano).
- Fix ref_table memory leak at probe time on the k3_j72xx bandgap
(Bryan Brattlof).
- Fix array underflow in prep_lookup_table (Dan Carpenter).
- Add static annotation to the k3_j72xx_bandgap_j7* data structure
(Jin Xiaoyun).
- Fix typos in comments detected on sun8i by Coccinelle (Julia
Lawall).
- Fix typos in comments on rzg2l (Biju Das).
- Remove as unnecessary call to dev_err() as the error is already
printed by the failing function on u8500 (Yang Li).
- Register the thermal zones as hwmon sensors for the Qcom thermal
sensors (Dmitry Baryshkov).
- Fix 'tmon' tool compilation issue by adding phtread.h include
(Markus Mayer).
- Fix typo in the comments for the 'tmon' tool (Slark Xiao).
- Make the thermal core use ida_alloc()/free() directly instead of
ida_simple_get()/ida_simple_remove() that have been deprecated
(keliu).
- Drop ACPI_FADT_LOW_POWER_S0 check from the Intel PCH thermal
control driver (Rafael Wysocki)"
* tag 'thermal-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
thermal/of: Initialize trip points separately
thermal/of: Use thermal trips stored in the thermal zone
thermal/core: Add thermal_trip in thermal_zone
thermal/core: Rename 'trips' to 'num_trips'
thermal/core: Move thermal_set_delay_jiffies to static
thermal/core: Remove unneeded EXPORT_SYMBOLS
thermal/of: Move thermal_trip structure to thermal.h
thermal/of: Remove the device node pointer for thermal_trip
thermal/of: Replace device node match with device node search
thermal/core: Remove duplicate information when an error occurs
thermal/core: Avoid calling ->get_trip_temp() unnecessarily
thermal/tools/tmon: Fix typo 'the the' in comment
thermal/tools/tmon: Include pthread and time headers in tmon.h
thermal/ti-soc-thermal: Fix comment typo
thermal/drivers/qcom/spmi-adc-tm5: Register thermal zones as hwmon sensors
thermal/drivers/qcom/temp-alarm: Register thermal zones as hwmon sensors
thermal/drivers/u8500: Remove unnecessary print function dev_err()
thermal/drivers/rzg2l: Fix comments
thermal/drivers/sun8i: Fix typo in comment
thermal/drivers/k3_j72xx_bandgap: Make k3_j72xx_bandgap_j721e_data and k3_j72xx_bandgap_j7200_data static
...
|
