| Age | Commit message (Collapse) | Author |
|---|
|
Pull block fixes from Jens Axboe:
- NVMe changes via Christoph:
- revert the cross-controller atomic write size validation
that caused regressions (Christoph Hellwig)
- fix endianness of command word printout in
nvme_log_err_passthru() (John Garry)
- fix callback lock for TLS handshake (Maurizio Lombardi)
- fix misaccounting of nvme-mpath inflight I/O (Yu Kuai)
- fix inconsistent RCU list manipulation in
nvme_ns_add_to_ctrl_list() (Zheng Qixing)
- Fix for a kobject leak in queue unregistration
- Fix for loop async file write start/end handling
* tag 'block-6.16-20250718' of git://git.kernel.dk/linux:
loop: use kiocb helpers to fix lockdep warning
nvmet-tcp: fix callback lock for TLS handshake
nvme: fix misaccounting of nvme-mpath inflight I/O
nvme: revert the cross-controller atomic write size validation
nvme: fix endianness of command word prints in nvme_log_err_passthru()
nvme: fix inconsistent RCU list manipulation in nvme_ns_add_to_ctrl_list()
block: fix kobject leak in blk_unregister_queue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain / cpuidle-psci fixes from Ulf Hansson:
"pmdomain core:
- Respect CPU latency QoS limit in the genpd governor for CPUs
cpuidle-psci:
- Fix cpuhotplug support for PREEMPT_RT"
* tag 'pmdomain-v6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
cpuidle: psci: Fix cpuhotplug routine with PREEMPT_RT=y
pmdomain: governor: Consider CPU latency tolerance from pm_domain_cpu_gov
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix the devres release callback for devm_gpiod_put_array()
- add an ACPI quirk for Acer Nitro V15 suspend & wakeup
* tag 'gpio-fixes-for-v6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: devres: release GPIOs in devm_gpiod_put_array()
gpiolib: acpi: Add a quirk for Acer Nitro V15
|
|
Pull drm fixes from Dave Airlie:
"Seems like a quiet enough week, xe/amdgpu being the usual suspects,
then mediatek with a few fixes, and otherwise just misc other bits.
dp:
- aux dpcd address fix
xe:
- SR-IOV fixes for GT reset and TLB invalidation
- Fix memory copy direction during migration
- Fix alignment check on migration
- Fix MOCS and page fault init order to correctly account
for topology
amdgpu:
- Fix a DC memory leak
- DCN 4.0.1 degamma LUT fix
- Fix reset counter handling for soft recovery
- GC 8 fix
radeon:
- Drop console locks when suspending/resuming
nouveau:
- ioctl validation fix
panfrost:
- scheduler bug fix
mediatek:
- Add wait_event_timeout when disabling plane
- only announce AFBC if really supported
- mtk_dpi: Reorder output formats on MT8195/88"
* tag 'drm-fixes-2025-07-18-1' of https://gitlab.freedesktop.org/drm/kernel:
drm/mediatek: mtk_dpi: Reorder output formats on MT8195/88
drm/mediatek: only announce AFBC if really supported
drm/mediatek: Add wait_event_timeout when disabling plane
drm/xe/pf: Resend PF provisioning after GT reset
drm/xe/pf: Prepare to stop SR-IOV support prior GT reset
drm/xe/migrate: Fix alignment check
drm/xe: Move page fault init after topology init
drm/xe/mocs: Initialize MOCS index early
drm/xe/migrate: fix copy direction in access_memory
drm/xe: Dont skip TLB invalidations on VF
drm/amdgpu/gfx8: reset compute ring wptr on the GPU on resume
drm/amdgpu: Increase reset counter only on success
drm/radeon: Do not hold console lock during resume
drm/radeon: Do not hold console lock while suspending clients
drm/amd/display: Disable CRTC degamma LUT for DCN401
drm/amd/display: Free memory allocation
drm/dp: Change AUX DPCD probe address from LANE0_1_STATUS to TRAINING_PATTERN_SET
drm/panfrost: Fix scheduler workqueue bug
drm/nouveau: check ioctl command codes better
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fixes from Vinod Koul:
"This contains a couple of amd driver fixes to handle alerts when the
link is down and the cmd status register clears up.
Also a revert of the qualcomm driver channel map support due to a
regression"
* tag 'soundwire-6.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: Revert "soundwire: qcom: Add set_channel_map api support"
soundwire: amd: fix for clearing command status register
soundwire: amd: fix for handling slave alerts after link is down
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- Mediatek flag reuse error fix
- Array overbound fix for nbpfaxi
- Frame size warning in driver probe
* tag 'dmaengine-fix-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dma: dw-edma: Fix build warning in dw_edma_pcie_probe()
dmaengine: nbpfaxi: Fix memory corruption in probe()
dmaengine: mediatek: Fix a flag reuse error in mtk_cqdma_tx_status()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
"Core:
- use per-PHY lockdep keys, in order to fix a phy using internal phys
Drivers:
- tegra:
- fixes for unbalanced regulator
- decouple pad calibration fix
- disable periodic updates
- qualcomm:
- error code fix for driver probe"
* tag 'phy-fix-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: qcom: fix error code in snps_eusb2_hsphy_probe()
phy: use per-PHY lockdep keys
phy: tegra: xusb: Fix unbalanced regulator disable in UTMI PHY mode
phy: tegra: xusb: Disable periodic tracking on Tegra234
phy: tegra: xusb: Decouple CYA_TRK_CODE_UPDATE_ON_IDLE from trk_hw_mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC host:
- bcm2835: Fix dma_unmap_sg() nents value
- sdhci_am654: Add workaround for maximum HW timeout
- sdhci-pci: Disable broken CQE Intel GLK-based Positivo models
MEMSTICK:
- Zero initialize id_reg in h_memstick_read_dev_id()"
* tag 'mmc-v6.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
memstick: core: Zero initialize id_reg in h_memstick_read_dev_id()
mmc: bcm2835: Fix dma_unmap_sg() nents value
mmc: sdhci_am654: Workaround for Errata i2312
mmc: sdhci-pci: Quirk for broken command queuing on Intel GLK-based Positivo models
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- SR-IOV fixes for GT reset and TLB invalidation
- Fix memory copy direction during migration
- Fix alignment check on migration
- Fix MOCS and page fault init order to correctly
account for topology
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/6jworkgupwstm4v7aohbuzod3dyz4u7pyfhshr5ifgf2xisgj3@cm5em5yupjiu
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes - 20250718
1. Add wait_event_timeout when disabling plane
2. only announce AFBC if really supported
3. mtk_dpi: Reorder output formats on MT8195/88
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20250717232916.12372-1-chunkuang.hu@kernel.org
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.16-2025-07-17:
amdgpu:
- Fix a DC memory leak
- DCN 4.0.1 degamma LUT fix
- Fix reset counter handling for soft recovery
- GC 8 fix
radeon:
- Drop console locks when suspending/resuming
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250717171935.642380-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- DP AUX DPCD address fix (Imre)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aHkQmRhelb4Fzqau@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.16 final?:
- nouveau ioctl validation fix.
- panfrost scheduler bug.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/ee784a3a-30b4-489a-8503-b1be3b09268c@linux.intel.com
|
|
Reorder output format arrays in both MT8195 DPI and DP_INTF block
configuration by decreasing preference order instead of alphanumeric
one, as expected by the atomic_get_output_bus_fmts callback function
of drm_bridge controls, so the RGB ones are used first during the
bus format negotiation process.
Fixes: 20fa6a8fc588 ("drm/mediatek: mtk_dpi: Allow additional output formats on MT8195/88")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20250606-mtk_dpi-mt8195-fix-wrong-color-v1-1-47988101b798@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Currently even the SoC's OVL does not declare the support of AFBC, AFBC
is still announced to the userspace within the IN_FORMATS blob, which
breaks modern Wayland compositors like KWin Wayland and others.
Gate passing modifiers to drm_universal_plane_init() behind querying the
driver of the hardware block for AFBC support.
Fixes: c410fa9b07c3 ("drm/mediatek: Add AFBC support to Mediatek DRM driver")
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: CK Hu <ck.hu@medaitek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20250531121140.387661-1-uwu@icenowy.me/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Our hardware registers are set through GCE, not by the CPU.
DRM might assume the hardware is disabled immediately after calling
atomic_disable() of drm_plane, but it is only truly disabled after the
GCE IRQ is triggered.
Additionally, the cursor plane in DRM uses async_commit, so DRM will
not wait for vblank and will free the buffer immediately after calling
atomic_disable().
To prevent the framebuffer from being freed before the layer disable
settings are configured into the hardware, which can cause an IOMMU
fault error, a wait_event_timeout has been added to wait for the
ddp_cmdq_cb() callback,indicating that the GCE IRQ has been triggered.
Fixes: 2f965be7f900 ("drm/mediatek: apply CMDQ control flow")
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20250624113223.443274-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, CAN, WiFi and Netfilter.
More code here than I would have liked. That said, better now than
next week. Nothing particularly scary stands out. The improvement to
the OpenVPN input validation is a bit large but better get them in
before the code makes it to a final release. Some of the changes we
got from sub-trees could have been split better between the fix and
-next refactoring, IMHO, that has been communicated.
We have one known regression in a TI AM65 board not getting link. The
investigation is going a bit slow, a number of people are on vacation.
We'll try to wrap it up, but don't think it should hold up the
release.
Current release - fix to a fix:
- Bluetooth: L2CAP: fix attempting to adjust outgoing MTU, it broke
some headphones and speakers
Current release - regressions:
- wifi: ath12k: fix packets received in WBM error ring with REO LUT
enabled, fix Rx performance regression
- wifi: iwlwifi:
- fix crash due to a botched indexing conversion
- mask reserved bits in chan_state_active_bitmap, avoid FW assert()
Current release - new code bugs:
- nf_conntrack: fix crash due to removal of uninitialised entry
- eth: airoha: fix potential UaF in airoha_npu_get()
Previous releases - regressions:
- net: fix segmentation after TCP/UDP fraglist GRO
- af_packet: fix the SO_SNDTIMEO constraint not taking effect and a
potential soft lockup waiting for a completion
- rpl: fix UaF in rpl_do_srh_inline() for sneaky skb geometry
- virtio-net: fix recursive rtnl_lock() during probe()
- eth: stmmac: populate entire system_counterval_t in get_time_fn()
- eth: libwx: fix a number of crashes in the driver Rx path
- hv_netvsc: prevent IPv6 addrconf after IFF_SLAVE lost that meaning
Previous releases - always broken:
- mptcp: fix races in handling connection fallback to pure TCP
- rxrpc: assorted error handling and race fixes
- sched: another batch of "security" fixes for qdiscs (QFQ, HTB)
- tls: always refresh the queue when reading sock, avoid UaF
- phy: don't register LEDs for genphy, avoid deadlock
- Bluetooth: btintel: check if controller is ISO capable on
btintel_classify_pkt_type(), work around FW returning incorrect
capabilities
Misc:
- make OpenVPN Netlink input checking more strict before it makes it
to a final release
- wifi: cfg80211: remove scan request n_channels __counted_by, it's
only yielding false positives"
* tag 'net-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
rxrpc: Fix to use conn aborts for conn-wide failures
rxrpc: Fix transmission of an abort in response to an abort
rxrpc: Fix notification vs call-release vs recvmsg
rxrpc: Fix recv-recv race of completed call
rxrpc: Fix irq-disabled in local_bh_enable()
selftests/tc-testing: Test htb_dequeue_tree with deactivation and row emptying
net/sched: Return NULL when htb_lookup_leaf encounters an empty rbtree
net: bridge: Do not offload IGMP/MLD messages
selftests: Add test cases for vlan_filter modification during runtime
net: vlan: fix VLAN 0 refcount imbalance of toggling filtering during runtime
tls: always refresh the queue when reading sock
virtio-net: fix recursived rtnl_lock() during probe()
net/mlx5: Update the list of the PCI supported devices
hv_netvsc: Set VF priv_flags to IFF_NO_ADDRCONF before open to prevent IPv6 addrconf
phonet/pep: Move call to pn_skb_get_dst_sockaddr() earlier in pep_sock_accept()
Bluetooth: L2CAP: Fix attempting to adjust outgoing MTU
netfilter: nf_conntrack: fix crash due to removal of uninitialised entry
net: fix segmentation after TCP/UDP fraglist GRO
ipv6: mcast: Delay put pmc->idev in mld_del_delrec()
net: airoha: fix potential use-after-free in airoha_npu_get()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These address three issues introduced during the current development
cycle and related to system suspend and hibernation, one triggering
when asynchronous suspend of devices fails, one possibly affecting
memory management in the core suspend code error path, and one due to
duplicate filesystems freezing during system suspend:
- Fix a deadlock that may occur on asynchronous device suspend
failures due to missing completion updates in error paths (Rafael
Wysocki)
- Drop a misplaced pm_restore_gfp_mask() call, which may cause swap
to be accessed too early if system suspend fails, from
suspend_devices_and_enter() (Rafael Wysocki)
- Remove duplicate filesystems_freeze/thaw() calls, which sometimes
cause systems to be unable to resume, from enter_state() (Zihuan
Zhang)"
* tag 'pm-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Update power.completion for all devices on errors
PM: suspend: clean up redundant filesystems_freeze/thaw() handling
PM: suspend: Drop a misplaced pm_restore_gfp_mask() call
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_sync: fix connectable extended advertising when using static random address
- hci_core: fix typos in macros
- hci_core: add missing braces when using macro parameters
- hci_core: replace 'quirks' integer by 'quirk_flags' bitmap
- SMP: If an unallowed command is received consider it a failure
- SMP: Fix using HCI_ERROR_REMOTE_USER_TERM on timeout
- L2CAP: Fix null-ptr-deref in l2cap_sock_resume_cb()
- L2CAP: Fix attempting to adjust outgoing MTU
- btintel: Check if controller is ISO capable on btintel_classify_pkt_type
- btusb: QCA: Fix downloading wrong NVM for WCN6855 GF variant without board ID
* tag 'for-net-2025-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix attempting to adjust outgoing MTU
Bluetooth: btusb: QCA: Fix downloading wrong NVM for WCN6855 GF variant without board ID
Bluetooth: hci_dev: replace 'quirks' integer by 'quirk_flags' bitmap
Bluetooth: hci_core: add missing braces when using macro parameters
Bluetooth: hci_core: fix typos in macros
Bluetooth: SMP: Fix using HCI_ERROR_REMOTE_USER_TERM on timeout
Bluetooth: SMP: If an unallowed command is received consider it a failure
Bluetooth: btintel: Check if controller is ISO capable on btintel_classify_pkt_type
Bluetooth: hci_sync: fix connectable extended advertising when using static random address
Bluetooth: Fix null-ptr-deref in l2cap_sock_resume_cb()
====================
Link: https://patch.msgid.link/20250717142849.537425-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Antonio Quartulli says:
====================
This bugfix batch includes the following changes:
* properly propagate sk mark to skb->mark field
* reject unexpected incoming netlink attributes
* reset GSO state when moving skb from transport to tunnel layer
* tag 'ovpn-net-20250716' of https://github.com/OpenVPN/ovpn-net-next:
ovpn: reset GSO metadata after decapsulation
ovpn: reject unexpected netlink attributes
ovpn: propagate socket mark to skb in UDP
====================
Link: https://patch.msgid.link/20250716115443.16763-1-antonio@openvpn.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The deadlock appears in a stack trace like:
virtnet_probe()
rtnl_lock()
virtio_config_changed_work()
netdev_notify_peers()
rtnl_lock()
It happens if the VMM sends a VIRTIO_NET_S_ANNOUNCE request while the
virtio-net driver is still probing.
The config_work in probe() will get scheduled until virtnet_open() enables
the config change notification via virtio_config_driver_enable().
Fixes: df28de7b0050 ("virtio-net: synchronize operstate with admin state on up/down")
Signed-off-by: Zigit Zo <zuozhijie@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250716115717.1472430-1-zuozhijie@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the upcoming ConnectX-10 device ID to the table of supported
PCI device IDs.
Cc: stable@vger.kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1752650969-148501-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
addrconf
Set an additional flag IFF_NO_ADDRCONF to prevent ipv6 addrconf.
Commit under Fixes added a new flag change that was not made
to hv_netvsc resulting in the VF being assinged an IPv6.
Fixes: 8a321cf7becc ("net: add IFF_NO_ADDRCONF and use it in bonding to prevent ipv6 addrconf")
Suggested-by: Cathy Avery <cavery@redhat.com>
Signed-off-by: Li Tian <litian@redhat.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250716002607.4927-1-litian@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of fixes:
- ath12k performance regression from -rc1
- cfg80211 counted_by() removal for scan request
as it doesn't match usage and keeps complaining
- iwlwifi crash with certain older devices
- iwlwifi missing an error path unlock
- iwlwifi compatibility with certain BIOS updates
* tag 'wireless-2025-07-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: Fix botched indexing conversion
wifi: cfg80211: remove scan request n_channels counted_by
wifi: ath12k: Fix packets received in WBM error ring with REO LUT enabled
wifi: iwlwifi: mask reserved bits in chan_state_active_bitmap
wifi: iwlwifi: pcie: fix locking on invalid TOP reset
====================
Link: https://patch.msgid.link/20250717091831.18787-5-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If we reload the GuC due to suspend/resume or GT reset then we
have to resend not only any VFs provisioning data, but also PF
configuration, like scheduling parameters (EQ, PT), as otherwise
GuC will continue to use default values.
Fixes: 411220808cee ("drm/xe/pf: Restart VFs provisioning after GT reset")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250711193316.1920-3-michal.wajdeczko@intel.com
(cherry picked from commit 1c38dd6afa4a8ecce28e94da794fd1d205c30f51)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
As part of the resume or GT reset, the PF driver schedules work
which is then used to complete restarting of the SR-IOV support,
including resending to the GuC configurations of provisioned VFs.
However, in case of short delay between those two actions, which
could be seen by triggering a GT reset on the suspened device:
$ echo 1 > /sys/kernel/debug/dri/0000:00:02.0/gt0/force_reset
this PF worker might be still busy, which lead to errors due to
just stopped or disabled GuC CTB communication:
[ ] xe 0000:00:02.0: [drm:xe_gt_resume [xe]] GT0: resumed
[ ] xe 0000:00:02.0: [drm] GT0: trying reset from force_reset_show [xe]
[ ] xe 0000:00:02.0: [drm] GT0: reset queued
[ ] xe 0000:00:02.0: [drm] GT0: reset started
[ ] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel stopped
[ ] xe 0000:00:02.0: [drm:guc_ct_send_recv [xe]] GT0: H2G request 0x5503 canceled!
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF1 12 config KLVs (-ECANCELED)
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF1 configuration (-ECANCELED)
[ ] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel disabled
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF2 12 config KLVs (-ENODEV)
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF2 configuration (-ENODEV)
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push 2 of 2 VFs configurations
[ ] xe 0000:00:02.0: [drm:pf_worker_restart_func [xe]] GT0: PF: restart completed
While this VFs reprovisioning will be successful during next spin
of the worker, to avoid those errors, make sure to cancel restart
worker if we are about to trigger next reset.
Fixes: 411220808cee ("drm/xe/pf: Restart VFs provisioning after GT reset")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250711193316.1920-2-michal.wajdeczko@intel.com
(cherry picked from commit 9f50b729dd61dfb9f4d7c66900d22a7c7353a8c0)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The check would fail if the address is unaligned, but not when
accounting the offset. Instead of `buf | offset` it should have
been `buf + offset`. To make it more readable and also drop the
uintptr_t, just use the IS_ALIGNED() macro.
Fixes: 270172f64b11 ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250710-migrate-aligned-v1-1-44003ef3c078@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 81e139db6900503a2e68009764054fad128fbf95)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
We need the topology to determine GT page fault queue size, move page
fault init after topology init.
Cc: stable@vger.kernel.org
Fixes: 3338e4f90c14 ("drm/xe: Use topology to determine page fault queue size")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250710191208.1040215-1-matthew.brost@intel.com
(cherry picked from commit beb72acb5b38dbe670d8eb752d1ad7a32f9c4119)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
MOCS uc_index is used even before it is initialized in the following
callstack
guc_prepare_xfer()
__xe_guc_upload()
xe_guc_min_load_for_hwconfig()
xe_uc_init_hwconfig()
xe_gt_init_hwconfig()
Do MOCS index initialization earlier in the device probe.
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@intel.com>
Link: https://lore.kernel.org/r/20250520142445.2792824-1-balasubramani.vivekanandan@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 241cc827c0987d7173714fc5a95a7c8fc9bf15c0)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
After we do the modification on the host side, ensure we write the
result back to VRAM and not the other way around, otherwise the
modification will be lost if treated like a read.
Fixes: 270172f64b11 ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250710134128.800756-2-matthew.auld@intel.com
(cherry picked from commit c12fe703cab93f9d8bfe0ff32b58e7b1fd52be1f)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Skipping TLB invalidations on VF causing unrecoverable
faults. Probable reason for skipping TLB invalidations
on SRIOV could be lack of support for instruction
MI_FLUSH_DW_STORE_INDEX. Add back TLB flush with some
additional handling.
Helps in resolving,
[ 704.913454] xe 0000:00:02.1: [drm:pf_queue_work_func [xe]]
ASID: 0
VFID: 0
PDATA: 0x0d92
Faulted Address: 0x0000000002fa0000
FaultType: 0
AccessType: 1
FaultLevel: 0
EngineClass: 3 bcs
EngineInstance: 8
[ 704.913551] xe 0000:00:02.1: [drm:pf_queue_work_func [xe]] Fault response: Unsuccessful -22
V2:
- Use Xmas tree (MichalW)
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Fixes: 97515d0b3ed92 ("drm/xe/vf: Don't emit access to Global HWSP if VF")
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250710045945.1023840-1-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit b528e896fa570844d654b5a4617a97fa770a1030)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Pull NVMe fixes from Christoph:
"- revert the cross-controller atomic write size validation that caused
regressions (Christoph Hellwig)
- fix endianness of command word prints in nvme_log_err_passthru()
(John Garry)
- fix callback lock for TLS handshake (Maurizio Lombardi)
- fix misaccounting of nvme-mpath inflight I/O (Yu Kuai)
- fix inconsistent RCU list manipulation in nvme_ns_add_to_ctrl_list()
(Zheng Qixing)"
* tag 'nvme-6.16-2025-07-17' of git://git.infradead.org/nvme:
nvmet-tcp: fix callback lock for TLS handshake
nvme: fix misaccounting of nvme-mpath inflight I/O
nvme: revert the cross-controller atomic write size validation
nvme: fix endianness of command word prints in nvme_log_err_passthru()
nvme: fix inconsistent RCU list manipulation in nvme_ns_add_to_ctrl_list()
|
|
devm_gpiod_put_array() is meant to undo the effects of
devm_gpiod_get_array() - in particular, it should release the GPIOs
contained in the array acquired with the latter. It is meant to be the
resource-managed version of gpiod_put_array(), and it should behave
similar to the non-array version devm_gpiod_put().
Since commit d1d52c6622a6 ("gpiolib: devres: Finish the conversion to
use devm_add_action()") it doesn't do that anymore, it just removes the
devres action and frees associated memory, but it doesn't actually
release the GPIOs.
Fix by switching from devm_remove_action() to devm_release_action(),
which will in addition invoke the action to release the GPIOs.
Fixes: d1d52c6622a6 ("gpiolib: devres: Finish the conversion to use devm_add_action()")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reported-by: Wattson CI <wattson-external@google.com>
Reported-by: Samuel Wu <wusamuel@google.com>
Link: https://lore.kernel.org/r/20250715-gpiolib-devres-put-array-fix-v1-1-970d82a8c887@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-07-15 (ixgbe, fm10k, i40e, ice)
Arnd Bergmann resolves compile issues with large NR_CPUS for ixgbe, fm10k,
and i40e.
For ice:
Dave adds a NULL check for LAG netdev.
Michal corrects a pointer check in debugfs initialization.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: check correct pointer in fwlog debugfs
ice: add NULL check in eswitch lag check
ethernet: intel: fix building with large NR_CPUS
====================
Link: https://patch.msgid.link/20250715202948.3841437-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
np->name was being used after calling of_node_put(np), which
releases the node and can lead to a use-after-free bug.
Previously, of_node_put(np) was called unconditionally after
of_find_device_by_node(np), which could result in a use-after-free if
pdev is NULL.
This patch moves of_node_put(np) after the error check to ensure
the node is only released after both the error and success cases
are handled appropriately, preventing potential resource issues.
Fixes: 23290c7bc190 ("net: airoha: Introduce Airoha NPU support")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250715143102.3458286-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
gso_size is expected by the networking stack to be the size of the
payload (thus, not including ethernet/IP/TCP-headers). However, cqe_bcnt
is the full sized frame (including the headers). Dividing cqe_bcnt by
lro_num_seg will then give incorrect results.
For example, running a bpftrace higher up in the TCP-stack
(tcp_event_data_recv), we commonly have gso_size set to 1450 or 1451 even
though in reality the payload was only 1448 bytes.
This can have unintended consequences:
- In tcp_measure_rcv_mss() len will be for example 1450, but. rcv_mss
will be 1448 (because tp->advmss is 1448). Thus, we will always
recompute scaling_ratio each time an LRO-packet is received.
- In tcp_gro_receive(), it will interfere with the decision whether or
not to flush and thus potentially result in less gro'ed packets.
So, we need to discount the protocol headers from cqe_bcnt so we can
actually divide the payload by lro_num_seg to get the real gso_size.
v2:
- Use "(unsigned char *)tcp + tcp->doff * 4 - skb->data)" to compute header-len
(Tariq Toukan <tariqt@nvidia.com>)
- Improve commit-message (Gal Pressman <gal@nvidia.com>)
Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files")
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250715-cpaasch-pf-925-investigate-incorrect-gso_size-on-cx-7-nic-v2-1-e06c3475f3ac@openai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 42cdf6f687da ("drm/amdgpu/gfx8: always restore kcq MQDs") made the
ring pointer always to be reset on resume from suspend. This caused compute
rings to fail since the reset was done without also resetting it for the
firmware. Reset wptr on the GPU to avoid a disconnect between the driver
and firmware wptr.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3911
Fixes: 42cdf6f687da ("drm/amdgpu/gfx8: always restore kcq MQDs")
Signed-off-by: Eeli Haapalainen <eeli.haapalainen@protonmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2becafc319db3d96205320f31cc0de4ee5a93747)
Cc: stable@vger.kernel.org
|
|
Increment the reset counter only if soft recovery succeeded. This is
consistent with a ring hard reset behaviour where counter gets
incremented only if hard reset succeeded.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 25c314aa3ec3d30e4ee282540e2096b5c66a2437)
Cc: stable@vger.kernel.org
|
|
The function radeon_resume_kms() acquires the console lock. It is
inconsistent, as it depends on the notify_client argument. That
lock then covers a number of suspend operations that are unrelated
to the console.
Remove the calls to console_lock() and console_unlock() from the
radeon function. The console lock is only required by DRM's fbdev
emulation, which acquires it as necessary.
Also fixes a possible circular dependency between the console lock
and the client-list mutex, where the mutex is supposed to be taken
first.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fff8e0504499a929f26e2fb7cf7e2c9854e37b91)
|
|
The radeon driver holds the console lock while suspending in-kernel
DRM clients. This creates a circular dependency with the client-list
mutex, which is supposed to be acquired first. Reported when combining
radeon with another DRM driver.
Therefore, do not take the console lock in radeon, but let the fbdev
DRM client acquire the lock when needed. This is what all other DRM
drivers so.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Closes: https://lore.kernel.org/dri-devel/0a087cfd-bd4c-48f1-aa2f-4a3b12593935@oss.qualcomm.com/
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 612ec7c69d04cb58beb1332c2806da9f2f47a3ae)
|
|
In DCN401 pre-blending degamma LUT isn't affecting cursor as in previous
DCN version. As this is not the behavior close to what is expected for
CRTC degamma LUT, disable CRTC degamma LUT property in this HW.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4176
---
When enabling HDR on KDE, it takes the first CRTC 1D LUT available and
apply a color transformation (Gamma 2.2 -> PQ). AMD driver usually
advertises a CRTC degamma LUT as the first CRTC 1D LUT, but it's
actually applied pre-blending. In previous HW version, it seems to work
fine because the 1D LUT was applied to cursor too, but DCN401 presents a
different behavior and the 1D LUT isn't affecting the hardware cursor.
To address the wrong gamma on cursor with HDR (see the link), I came up
with this patch that disables CRTC degamma LUT in this hw, since it
presents a different behavior than others. With this KDE sees CRTC
regamma LUT as the first post-blending 1D LUT available. This is
actually more consistent with AMD color pipeline. It was tested by the
reporter, since I don't have the HW available for local testing and
debugging.
Melissa
---
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 340231cdceec2c45995d773a358ca3c341f151aa)
Cc: stable@vger.kernel.org
|
|
[WHY]
Free memory to avoid memory leak
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Clayton King <clayton.king@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fa699acb8e9be2341ee318077fa119acc7d5f329)
Cc: stable@vger.kernel.org
|
|
without board ID
For GF variant of WCN6855 without board ID programmed
btusb_generate_qca_nvm_name() will chose wrong NVM
'qca/nvm_usb_00130201.bin' to download.
Fix by choosing right NVM 'qca/nvm_usb_00130201_gf.bin'.
Also simplify NVM choice logic of btusb_generate_qca_nvm_name().
Fixes: d6cba4e6d0e2 ("Bluetooth: btusb: Add support using different nvm for variant WCN6855 controller")
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The 'quirks' member already ran out of bits on some platforms some time
ago. Replace the integer member by a bitmap in order to have enough bits
in future. Replace raw bit operations by accessor macros.
Fixes: ff26b2dd6568 ("Bluetooth: Add quirk for broken READ_VOICE_SETTING")
Fixes: 127881334eaa ("Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE")
Suggested-by: Pauli Virtanen <pav@iki.fi>
Tested-by: Ivan Pravdin <ipravdin.official@gmail.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btintel_classify_pkt_type
Due to what seem to be a bug with variant version returned by some
firmwares the code may set hdev->classify_pkt_type with
btintel_classify_pkt_type when in fact the controller doesn't even
support ISO channels feature but may use the handle range expected from
a controllers that does causing the packets to be reclassified as ISO
causing several bugs.
To fix the above btintel_classify_pkt_type will attempt to check if the
controller really supports ISO channels and in case it doesn't don't
reclassify even if the handle range is considered to be ISO, this is
considered safer than trying to fix the specific controller/firmware
version as that could change over time and causing similar problems in
the future.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219553
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2100565
Link: https://github.com/StarLabsLtd/firmware/issues/180
Fixes: f25b7fd36cc3 ("Bluetooth: Add vendor-specific packet classification for ISO data")
Cc: stable@vger.kernel.org
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Sean Rhodes <sean@starlabs.systems>
|
|
The lockdep tool can report a circular lock dependency warning in the loop
driver's AIO read/write path:
```
[ 6540.587728] kworker/u96:5/72779 is trying to acquire lock:
[ 6540.593856] ff110001b5968440 (sb_writers#9){.+.+}-{0:0}, at: loop_process_work+0x11a/0xf70 [loop]
[ 6540.603786]
[ 6540.603786] but task is already holding lock:
[ 6540.610291] ff110001b5968440 (sb_writers#9){.+.+}-{0:0}, at: loop_process_work+0x11a/0xf70 [loop]
[ 6540.620210]
[ 6540.620210] other info that might help us debug this:
[ 6540.627499] Possible unsafe locking scenario:
[ 6540.627499]
[ 6540.634110] CPU0
[ 6540.636841] ----
[ 6540.639574] lock(sb_writers#9);
[ 6540.643281] lock(sb_writers#9);
[ 6540.646988]
[ 6540.646988] *** DEADLOCK ***
```
This patch fixes the issue by using the AIO-specific helpers
`kiocb_start_write()` and `kiocb_end_write()`. These functions are
designed to be used with a `kiocb` and manage write sequencing
correctly for asynchronous I/O without introducing the problematic
lock dependency.
The `kiocb` is already part of the `loop_cmd` struct, so this change
also simplifies the completion function `lo_rw_aio_do_completion()` by
using the `iocb` from the `cmd` struct directly, instead of retrieving
the loop device from the request queue.
Fixes: 39d86db34e41 ("loop: add file_start_write() and file_end_write()")
Cc: Changhui Zhong <czhong@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250716114808.3159657-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A new warning in clang [1] points out that id_reg is uninitialized then
passed to memstick_init_req() as a const pointer:
drivers/memstick/core/memstick.c:330:59: error: variable 'id_reg' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
330 | memstick_init_req(&card->current_mrq, MS_TPC_READ_REG, &id_reg,
| ^~~~~~
Commit de182cc8e882 ("drivers/memstick/core/memstick.c: avoid -Wnonnull
warning") intentionally passed this variable uninitialized to avoid an
-Wnonnull warning from a NULL value that was previously there because
id_reg is never read from the call to memstick_init_req() in
h_memstick_read_dev_id(). Just zero initialize id_reg to avoid the
warning, which is likely happening in the majority of builds using
modern compilers that support '-ftrivial-auto-var-init=zero'.
Cc: stable@vger.kernel.org
Fixes: de182cc8e882 ("drivers/memstick/core/memstick.c: avoid -Wnonnull warning")
Link: https://github.com/llvm/llvm-project/commit/00dacf8c22f065cb52efb14cd091d441f19b319e [1]
Closes: https://github.com/ClangBuiltLinux/linux/issues/2105
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250715-memstick-fix-uninit-const-pointer-v1-1-f6753829c27a@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The ovpn_netdev_write() function is responsible for injecting
decapsulated and decrypted packets back into the local network stack.
Prior to this patch, the skb could retain GSO metadata from the outer,
encrypted tunnel packet. This original GSO metadata, relevant to the
sender's transport context, becomes invalid and misleading for the
tunnel/data path once the inner packet is exposed.
Leaving this stale metadata intact causes internal GSO validation checks
further down the kernel's network stack (validate_xmit_skb()) to fail,
leading to packet drops. The reasons for these failures vary by
protocol, for example:
- for ICMP, no offload handler is registered;
- for TCP and UDP, the respective offload handlers return errors when
comparing skb->len to the outdated skb_shinfo(skb)->gso_size.
By calling skb_gso_reset(skb) we ensure the inner packet is presented to
gro_cells_receive() with a clean state, correctly indicating it is an
individual packet from the perspective of the local stack.
This change eliminates the "Driver has suspect GRO implementation, TCP
performance may be compromised" warning and improves overall TCP
performance by allowing GSO/GRO to function as intended on the
decapsulated traffic.
Fixes: 11851cbd60ea ("ovpn: implement TCP transport")
Reported-by: Gert Doering <gert@greenie.muc.de>
Closes: https://github.com/OpenVPN/ovpn-net-next/issues/4
Tested-by: Gert Doering <gert@greenie.muc.de>
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
Netlink ops do not expect all attributes to be always set, however
this condition is not explicitly coded any where, leading the user
to believe that all sent attributes are somewhat processed.
Fix this behaviour by introducing explicit checks.
For CMD_OVPN_PEER_GET and CMD_OVPN_KEY_GET directly open-code the
needed condition in the related ops handlers.
While for all other ops use attribute subsets in the ovpn.yaml spec file.
Fixes: b7a63391aa98 ("ovpn: add basic netlink support")
Reported-by: Ralf Lici <ralf@mandelbit.com>
Closes: https://github.com/OpenVPN/ovpn-net-next/issues/19
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
OpenVPN allows users to configure a FW mark on sockets used to
communicate with other peers. The mark is set by means of the
`SO_MARK` Linux socket option.
However, in the ovpn UDP code path, the socket's `sk_mark` value is
currently ignored and it is not propagated to outgoing `skbs`.
This commit ensures proper inheritance of the field by setting
`skb->mark` to `sk->sk_mark` before handing the `skb` to the network
stack for transmission.
Fixes: 08857b5ec5d9 ("ovpn: implement basic TX path (UDP)")
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Link: https://www.mail-archive.com/openvpn-devel@lists.sourceforge.net/msg31877.html
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
