summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-02-19qlcnic: Bump up the version to 5.1.34Jitendra Kalsaria
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-19qlcnic: fix ping resumption to a VM after a live migrationShahed Shaikh
Delete the MAC address of a VM, from the adapter's embedded switch, after the VM had been migrated out of this adapter/server. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-19qlcnic: fix estimation of receive MSS in case of LRO for 83xx adapterShahed Shaikh
Set gso_size to MSS obtained from adapter to avoid incorrect estimation of receive MSS, which would lead to delayed ACKs in some traffic patterns Example: Send two or three packets and wait for ack and only then send remaining packets. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-19qlcnic: refactor Legacy interrupt handling for 83xxHimanshu Madhani
o Cleanly seperate 83xx Legacy interrupt handling code from 82xx o Update 83xx Legacy interrupt handling code to match with the spec Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-19qlcnic: fix mailbox interrupt.Sucheta Chakraborty
o Config interrupt is not needed for mailbox interrupts. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-19qlcnic: fix unsupported CDRP command error message.Jitendra Kalsaria
Added detailed error messages for FW CDRP command failure Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net into netDavid S. Miller
Pull in 'net' to take in the bug fixes that didn't make it into 3.8-final. Also, deal with the semantic conflict of the change made to net/ipv6/xfrm6_policy.c A missing rt6->n neighbour release was added to 'net', but in 'net-next' we no longer cache the neighbour entries in the ipv6 routes so that change is not appropriate there. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18target: Add missing mapped_lun bounds checking during make_mappedlun setupNicholas Bellinger
This patch adds missing bounds checking for the configfs provided mapped_lun value during target_fabric_make_mappedlun() setup ahead of se_lun_acl initialization. This addresses a potential OOPs when using a mapped_lun value that exceeds the hardcoded TRANSPORT_MAX_LUNS_PER_TPG-1 value within se_node_acl->device_list[]. Reported-by: Jan Engelhardt <jengelh@inai.de> Cc: Jan Engelhardt <jengelh@inai.de> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-18target: Fix lookup of dynamic NodeACLs during cached demo-mode operationNicholas Bellinger
This patch fixes a bug in core_tpg_check_initiator_node_acl() -> core_tpg_get_initiator_node_acl() where a dynamically created se_node_acl generated during session login would be skipped during subsequent lookup due to the '!acl->dynamic_node_acl' check, causing a new se_node_acl to be created with a duplicate ->initiatorname. This would occur when a fabric endpoint was configured with TFO->tpg_check_demo_mode()=1 + TPF->tpg_check_demo_mode_cache()=1 preventing the release of an existing se_node_acl during se_session shutdown. Also, drop the unnecessary usage of core_tpg_get_initiator_node_acl() within core_dev_init_initiator_node_lun_acl() that originally required the extra '!acl->dynamic_node_acl' check, and just pass the configfs provided se_node_acl pointer instead. Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-18w1: w1_therm: Add force-pullup option for "broken" sensorsMichael Arndt
Signed-off-by: Michael Arndt <michael@scriptkiller.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-18Merge branch 'release' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (35 commits) PM idle: remove global declaration of pm_idle unicore32 idle: delete stray pm_idle comment openrisc idle: delete pm_idle mn10300 idle: delete pm_idle microblaze idle: delete pm_idle m32r idle: delete pm_idle, and other dead idle code ia64 idle: delete pm_idle cris idle: delete idle and pm_idle ARM64 idle: delete pm_idle ARM idle: delete pm_idle blackfin idle: delete pm_idle sparc idle: rename pm_idle to sparc_idle sh idle: rename global pm_idle to static sh_idle x86 idle: rename global pm_idle to static x86_idle APM idle: register apm_cpu_idle via cpuidle tools/power turbostat: display SMI count by default intel_idle: export both C1 and C1E cpuidle: remove vestage definition of cpuidle_state_usage.driver_data x86 idle: remove 32-bit-only "no-hlt" parameter, hlt_works_ok flag x86 idle: remove mwait_idle() and "idle=mwait" cmdline param ... Conflicts: arch/x86/kernel/process.c (with PM / tracing commit 43720bd) drivers/acpi/processor_idle.c (with ACPICA commit 4f84291)
2013-02-18w1: ds2482: Added 1-Wire pull-up support to the driverMichael Arndt
Signed-off-by: Michael Arndt <michael@scriptkiller.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-18block: IBM RamSan 70/80 driver fixesPhilip J Kelleher
This patch includes the following driver fixes for the IBM RamSan 70/80 driver: o Changed the creg_ctrl lock from a mutex to a spinlock. o Added a count check for ioctl calls. o Removed unnecessary casting of void pointers. o Made every function static that needed to be. o Added comments to explain things more thoroughly. Signed-off-by: Philip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-02-18net: wireless: hostap: hostap_ap.c: Return -ENOMEM instead of -1 for if ↵Kumar Amit Mehta
kmalloc() fails. When memory allocation using, kmalloc() fails, report appropriate error value. Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-18net: wireless: orinoco: orinoco_usb.c: fix DMA buffers on stackKumar Amit Mehta
This patch fixes an instance of DMA buffer on stack(being passed to usb_control_msg) for the wireless USB version of the Agere Orinoco card driver. It also fixes the missing audit for the return value of firmware download routine. Found using smatch. Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-18rtlwifi: usb: allocate URB control message setup_packet and data buffer ↵Jussi Kivilinna
separately rtlwifi allocates both setup_packet and data buffer of control message urb, using shared kmalloc in _usbctrl_vendorreq_async_write. Structure used for allocating is: struct { u8 data[254]; struct usb_ctrlrequest dr; }; Because 'struct usb_ctrlrequest' is __packed, setup packet is unaligned and DMA mapping of both 'data' and 'dr' confuses ARM/sunxi, leading to memory corruptions and freezes. Patch changes setup packet to be allocated separately. [v2]: - Use WARN_ON_ONCE instead of WARN_ON Cc: <stable@vger.kernel.org> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-18mwifiex: add 802.11AC supportYogesh Ashok Powar
For STA mode, collect VHT realated IEs from the Beacons or Probe Responses and append similar VHT related IEs to association requests. For AP mode, get VHT related capability information and share it with cfg80211 at the time of wiphy register. This information is further used by cfg80211 and hostapd to start an AP with 802.11AC support. Currently only 8897 supports 802.11AC. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-18mwifiex: coding style cleanup in bss parameter updateYogesh Ashok Powar
They all can make one line. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-18mwifiex: fix empty TX ring check for PCIe8897 while unloading driverAvinash Patil
While unloading driver, we free all pending TX packets by flushing TX ring. There is unhandled case for PCIE8897 while checking for ring empty condition. This patch adds the handling by calling mwifiex_pcie_txbd_empty(). Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-18Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== This probably is the last big pull request for wireless bits for 3.9. Of course, I'm sure there will be a few stragglers here and there...surely a few bug fixes as well... :-) (In fact, I see that Johannes has already queued-up a few more for me while I was preparing this...) Included are a number of pulls... For mac80211-next, Johannes says: "The biggest change I have is undoubtedly Marco's mesh powersave implementation. Beyond that, I have a patch from Emmanuel to modify the DTIM period API in mac80211, scan improvements and a removal of some previous workaround code from Stanislaw, dynamic short slot time from Thomas and 64-bit station byte counters from Vladimir. I also made a number of changes myself, some related to WoWLAN, some auth/deauth improvements and most of them BSS list cleanups." "This time, I have relatively large number of fixes in various areas of the code (a memory leak in regulatory, an RX race in mac80211, the new radar checking caused a P2P device problem, some mesh issues with stations, an older bug in tracing and for kernel-doc) as well as a number of small new features. The biggest (in the diffstat) is my work on hidden SSID tracking." "Please pull to get * radar detection work from Simon * mesh improvements from Thomas * a connection monitoring/powersave fix from Wojciech * TDLS-related station management work from Jouni * VLAN crypto fixes from Michael Braun * CCK support in minstrel_ht from Felix * an SMPS (not SMSP, oops) related improvement in mac80211 (Emmanuel) * some WoWLAN work from Amitkumar Karwar: pattern match offset and a documentation fix * some WoWLAN work from myself (TCP connection wakeup feature API) * and a lot of VHT (and some HT) work (also from myself) And a number of more random cleanups/fixes. I merged mac80211/master to avoid a merge problem there." And regarding iwlwifi-next, Johannes says: "We continue work on our new driver, but I also have a WoWLAN and AP mode improvement for the previous driver and a change to use threaded interrupts to prepare us for working with non-PCIe devices." Regarding wl12xx, Luca says: "A few more patches intended for 3.9. Mostly some clean-ups I've been doing to make it easier to support device-tree. Also including one bug fix for wl12xx where the rates we advertise were wrong and an update in the wlconf structure to support newer firmwares." For the nfc-next bits, Samuel says: "This is the second NFC pull request for 3.9. We have: - A few pn533 fixes on top of Waldemar refactorization of the driver, one of them fixes target mode. - A new driver for Inside Secure microread chipset. It supports two physical layers: i2c and MEI. The MEI one depends on a patchset that's been sent to Greg Kroah-Hartman for inclusion into the 3.9 kernel [1]. The dependency is a KConfig one which means this code is not buildable as long as the MEI API is not usptream." "This 3rd NFC pull request for 3.9 contains a fix for the microread MEI physical layer support, as the MEI bus API changed. From the MEI code, we now pass the MEI id back to the driver probe routine, and we also pass a name and a MEI id table through the mei_bus_driver structure. A few renames as well like e.g. mei_bus_driver to mei_driver or mei_bus_client to mei_device in order to be closer to the driver model practices." For the ath6kl bits, Kalle says: "There's not anything special here, most of the patches are just code cleanup. The only functional changes are using the beacon interval from user space and fixing a crash which happens when inserting and removing the module in a loop." Also, I pulled the wireless tree in order to resolve some pending merge issues. On top of that, there is a bunch of work on brcmfmac that leads up to P2P support. Also, mwifiex, rtlwifi, and a variety of other drivers see some basic cleanups and minor enhancements. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18net: proc: change proc_net_remove to remove_proc_entryGao feng
proc_net_remove is only used to remove proc entries that under /proc/net,it's not a general function for removing proc entries of netns. if we want to remove some proc entries which under /proc/net/stat/, we still need to call remove_proc_entry. this patch use remove_proc_entry to replace proc_net_remove. we can remove proc_net_remove after this patch. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18net: proc: change proc_net_fops_create to proc_createGao feng
Right now, some modules such as bonding use proc_create to create proc entries under /proc/net/, and other modules such as ipv4 use proc_net_fops_create. It looks a little chaos.this patch changes all of proc_net_fops_create to proc_create. we can remove proc_net_fops_create after this patch. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18drivers: net: davinci_cpdma: acknowledge interrupt properlyMugunthan V N
CPDMA interrupts are not properly acknowledged which leads to interrupt storm, only cpdma interrupt 0 is acknowledged in Davinci CPDMA driver. Changed cpdma_ctlr_eoi api to acknowledge 1 and 2 interrupts which are used for rx and tx respectively. Reported-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18iwlwifi: dvm: improve (again) the prints in reclaim pathEmmanuel Grumbach
I removed a bit too much info last time. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18iwlwifi: dvm: fix delayed enter to CT-kill bugEytan Lifshitz
Theoretically, the card may not enter CTKILL: In case the timer that iwl_prepare_ct_kill_task is setting, will expire before tt->state revert to its previous state. Signed-off-by: Eytan Lifshitz <eytan.lifshitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18iwlwifi: mvm: Reserve MAC id 0 for managed interfacesIlan Peer
Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18iwlwifi: mvm: Fix resource allocation for P2P DeviceIlan Peer
The time event data structures are required also for P2P Device interface. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18iwlwifi: mvm: Set the scan type according to the vif typeIlan Peer
The FW can differentiate between scans, according to the interface type on which the scan was issues. Supply the interfaces type information to the FW. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18base: memory: fix soft/hard_offline_page permissionsFelipe Balbi
those two sysfs files don't have a 'show' method, so they shouldn't have a read permission. Thanks to Greg Kroah-Hartman for actually looking into the source code and figuring out we had a real bug with these two files. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-18iwlwifi: mvm: fix time event command handling raceJohannes Berg
Occasionally, we would run into this warning: iwlwifi 0000:02:00.0: U iwl_mvm_protect_session extend 0x2601: only 200 ms left iwlwifi 0000:02:00.0: U iwl_mvm_remove_time_event Removing TE 0x2601 iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command TIME_EVENT_CMD (#29), seq: 0x0925, 60 bytes at 37[5]:9 iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command TIME_EVENT_CMD iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command TIME_EVENT_CMD iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command TIME_EVENT_CMD (#29), seq: 0x0926, 60 bytes at 38[6]:9 iwlwifi 0000:02:00.0: U iwl_mvm_time_event_response TIME_EVENT_CMD response - UID = 0x2601 iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command TIME_EVENT_CMD iwlwifi 0000:02:00.0: U iwl_mvm_rx_time_event_notif Time event notification - UID = 0x2701 action 1 wlan0: associate with 00:0a:b8:55:a8:30 (try 2/3) ------------[ cut here ]------------ WARNING: at drivers/net/wireless/iwlwifi/mvm/time-event.c:269 iwl_mvm_time_event_send_add+0x163/0x1a0 [iwlmvm]() Modules linked in: [...] Call Trace: [<c1046e42>] warn_slowpath_common+0x72/0xa0 [<c1046e92>] warn_slowpath_null+0x22/0x30 [<f8cad913>] iwl_mvm_time_event_send_add+0x163/0x1a0 [iwlmvm] [<f8cadead>] iwl_mvm_protect_session+0xcd/0x1c0 [iwlmvm] [<f8ca2087>] iwl_mvm_mac_mgd_prepare_tx+0x67/0xa0 [iwlmvm] [<f882a130>] ieee80211_sta_work+0x8f0/0x1070 [mac80211] The reason is a problem with asynchronous vs. synchronous commands, what happens here is the following: * TE 0x2601 is removed, the TIME_EVENT_CMD for that is async * a new TE (will be 0x2701) is created, the TIME_EVENT_CMD for that is sync and also uses a notification wait for the response (to avoid another race condition) * the response for the TE 0x2601 removal comes from the firmware, and is handled by the notification wait handler that's really waiting for the second response, but can't tell the difference, we therefore see the message "TIME_EVENT_CMD response - UID = 0x2601" instead of "TIME_EVENT_CMD response - UID = 0x2701". Fix this issue by making the TE removal synchronous as well, this means that we wait for the response to that command first, before there's any chance of sending a new one. Also, to detect such issues more easily in the future, add a warning to the notification handler that detects them. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18iwlwifi: mvm: add debug statement to time event addJohannes Berg
This is helpful for debugging the time event warning, but also in general to see what's going on. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18iwlwifi: mvm: fix GO powersave client manipulationJohannes Berg
All station commands must include a valid MAC ID, the ID 0 is randomly valid in some cases, but we must set the ID properly. Do that by passing the right station and using its mac_id_n_color. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18iwlwifi: mvm: program DTIM timings properlyJohannes Berg
For the firmware to know when DTIM beacons arrive we have to program the DTIM time in TSF and system time in the MAC context. Since mac80211 now tracks the different times (on demand), this becomes easy. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18iwlwifi: mvm: fix merge errorJohannes Berg
The iwlwifi-next tree removed IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC while the mac80211-next tree removed Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18tty: mxser: improve error handling in mxser_probe() and mxser_module_init()Alexey Khoroshilov
1. Currently mxser_probe() and mxser_module_init() ignore errors that can happen in tty_port_register_device(). 2. mxser_module_init() does not deallocate resources allocated in mxser_get_ISA_conf() if mxser_initbrd() failed. The patch adds proper error handling in all the cases. Also it moves free_irq() from mxser_release_ISA_res() to mxser_board_remove(), since it makes mxser_release_ISA_res() a counterpart for mxser_get_ISA_conf(), while free_irq() is relevant to both ISA and PCI boards. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-18serial: imx: fix uninitialized variable warningShawn Guo
Commit 677fe55 (serial: imx: Fix recursive locking bug) introduces an uninitialized variable warning as below. CC drivers/tty/serial/imx.o drivers/tty/serial/imx.c: In function ‘imx_console_write’: include/linux/spinlock.h:340:2: warning: ‘flags’ may be used uninitialized in this function [-Wuninitialized] drivers/tty/serial/imx.c:1214:16: note: ‘flags’ was declared here Initialize the variable to suppress the warning. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-18staging: comedi: vmk80xx: wait for URBs to completeIan Abbott
For Velleman K8055 (aka VM110), `vmk80xx_read_packet()` and `vmk8055_write_packet()` send an URB asynchronously and do not wait for it complete. However, callers of `vmk80xx_read_packet()` are assuming the contents of the data buffer `devpriv->usb_rx_buf` are valid immediately after that function returns. For Velleman K8061 (aka VM140), `vmk80xx_read_packet()` and `vmk80xx_write_packet()` punt the requests to `vmk80xx_do_bulk_msg()` which *does* wait for the URBs to complete (albeit with no error checking!). Change `vmk80xx_read_packet()` and `vmk80xx_write_packet()` to use `usb_interrupt_msg()` for the K8055, so the callers of `vmk80xx_read_packet()` can assume the data buffer contents are valid (if no error occurred). Remove all the code for checking for transfers in progress and busy waiting, as it's no longer needed. Pretty much all the callers of `vmk80xx_read_packet()` and `vmk80xx_write_packet()` hold the same semaphore anyway, and the only caller that doesn't (`vmk80xx_reset_device()` called during initialization of the device) doesn't really matter. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-18staging: comedi: drivers: addi-data: hwdrv_apci3200.c: Add a missing semicolonKumar Amit Mehta
fix for missing end-of-statement by adding a semicolon Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-18staging: et131x: Update TODO listMark Einon
David Miller <davem@davemloft.net> had provided some review comments for this driver. Update the TODO list with some action points from his review. Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-18staging: et131x: Remove assignment of skb->devMark Einon
The call eth_type_trans() sets skb->dev to netdev, so there's no needto set it before the call. Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-18staging: wlan-ng: hfa384x.h: fix for error reported by smatchKumar Amit Mehta
Add the missing header include for 'struct urb' datatypes to avoid potential build issues. Found using smatch. Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-18Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/dvm/tx.c drivers/net/wireless/ti/wlcore/sdio.c drivers/net/wireless/ti/wlcore/spi.c
2013-02-18staging/zache checkpatch ERROR: spaces prohibited around thatRobert Berger
zbud.c:106: ERROR: spaces prohibited around that ':' (ctx:VxW) zbud.c:107: ERROR: spaces prohibited around that ':' (ctx:VxW) Signed-off-by: Robert Berger <rber.git@ReliableEmbeddedSystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-18USB: update host controller Kconfig entriesArnd Bergmann
The recent patches from Manjunath Goudar introduced two small mistakes in the Kconfig help text for the new options. Let's fix those and the other entries that have become stale over time. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "Two small driver fixups and a documentation update for managed input devices" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - fix wacom_set_report retry logic Input: document that unregistering managed devices is not necessary Input: lm8323 - fix checking PWM interrupt status
2013-02-18libceph: kill ceph_osdc_create_event() "one_shot" parameterAlex Elder
There is only one caller of ceph_osdc_create_event(), and it provides 0 as its "one_shot" argument. Get rid of that argument and just use 0 in its place. Replace the code in handle_watch_notify() that executes if one_shot is nonzero in the event with a BUG_ON() call. While modifying "osd_client.c", give handle_watch_notify() static scope. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-18tg3: Use different macros for pci_chip_rev_id accessesJoe Perches
Upper case macros for various chip attributes are slightly difficult to read and are a bit out of characterto the other tg3_<foo> attribute functions. Convert: GET_ASIC_REV(tp->pci_chip_rev_id) -> tg3_asic_rev(tp) GET_CHIP_REV(tp->pci_chip_rev_id) -> tg3_chip_rev(tp) Remove: GET_METAL_REV(tp->pci_chip_rev_id) -> tg3_metal_rev(tp) (unused) Add: tg3_chip_rev_id(tp) for tp->pci_chip_rev_id so access styles are similar to tg3_asic_rev and tg3_chip_rev. These macros are not converted to static inline functions because gcc (tested with 4.7.2) is currently unable to optimize the object code it produces the same way and code is otherwise larger. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18tg3: Remove define and single use of GET_CHIP_REV_IDJoe Perches
It's the same value as tp->pci_chip_rev_id so use that instead. This makes all CHIPREV_ID_<foo> tests the same. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18bgmac: fix unaligned accesses to network headersHauke Mehrtens
Without this patch I get many unaligned access warnings per packet, this patches fixes them all. This should improve performance on some systems like mips. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== This series contains updates to e1000, e1000e, igb, igbvf and ixgbe. The e1000, e1000e, igb and igbvf are single patch changes and the remaining 11 patches are all against ixgbe. The e1000 patch is a comment cleanup to align e1000 with the code commenting style for /drivers/net. It also contains a few other white space cleanups (i.e. fix lines over 80 char, remove unnecessary blank lines and fix the use of tabs/spaces). The e1000e patch from Koki (Fujitsu) adds a warning when link speed is downgraded due to SmartSpeed. The igb patch from Stefan (Red Hat) increases the timeout in the ethtool offline self-test because some i350 adapters would sometimes fail the self-test because link auto negotiation may take longer than the current 4 second timeout. The igbvf patch from Alex is meant to address several race issues that become possible because next_to_watch could possibly be set to a value that shows that the descriptor is done when it is not. In order to correct that we instead make next_to_watch a pointer that is set to NULL during cleanup, and set to the eop_desc after the descriptor rings have been written. The remaining patches for ixgbe are a mix of fixes and added support as well as some cleanup. Most notably is the added support for displaying the number of Tx/Rx channels via ethtool by Alex. Also Aurélien adds the ability for reading data from SFP+ modules over i2c for diagnostic monitoring. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-16 18:59:08 +0000