| Age | Commit message (Collapse) | Author |
|---|
|
DRAM scrubbing can take time hence it adds to latency during allocation.
To minimize latency during initialization, scrubbing is moved to release
call.
In case scrubbing fails it means the device is in a bad state,
hence HARD reset is initiated.
Signed-off-by: Bharat Jauhari <bjauhari@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In order to minimize hard coded values between F/W and the driver, we
send msi-x indexes dynamically to the F/W.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Clearing QM errors by the driver will prevent these H/W blocks from
stopping in case they are configured to stop on errors, so perform this
clearing only if this mode is not in use.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In case of multiple ECC errors, FW will set the DEVICE_UNUSABLE bit.
On boot-up, the driver will therefore fail inserting the device.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Prefer the use of strscpy when copying the ASIC name into a char array,
to prevent accidentally exceeding the array's length.
In addition, strlcpy is frowned upon so replace it.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
When trying to debug program, the user often needs to
dump large parts of the device's DRAM, which can reach to tens of GBs.
Because reading from the device's internal memory through the PCI BAR
is extremely slow, the debug can take hours.
Instead, we can provide the user to copy data through one of the DMA
engines. This will make the operation much faster.
Currently, only GAUDI is supported.
In GAUDI, we need to find a PCI DMA engine that is IDLE and set the
DMA as secured to be able to bypass our MMU as we currently don't
map the temporary buffer to the MMU.
Example bash one-line to dump entire HBM to file (~2 minutes):
for (( i=0x0; i < 0x800000000; i+=0x8000000 )); do \
printf '0x%x\n' $i | sudo tee /sys/kernel/debug/habanalabs/hl0/addr ; \
echo 0x8000000 | sudo tee /sys/kernel/debug/habanalabs/hl0/dma_size ; \
sudo cat /sys/kernel/debug/habanalabs/hl0/data_dma >> hbm.txt ; done
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Since we moved the SOB reset flow to workqueue and
not part of the fence release flow, we might reach a
scenario where new context is created while we in the middle
of resetting the SOB.
in such cases the reset may fail due to idle check.
This will mess up the streams sync since the SOB value is invalid.
so we protect this area with a mutex, to delay context creation.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
There is a need to allow to user to send command submissions with
custom timeout as some CS take longer than the max timeout that is
used by default.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The new approach is based on the notion that the relative
current power consumption is in relation of proportionality
to device's true utilization.
Utilization info ranges between [0,100]%
Currently, dc_power values are hard-coded.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In order to use minimum of hard coded values common to LKD and F/W
a dynamic method to work with PLLs is introduced in this patch.
Formerly asic specific PLL numbering is now common for all asics.
To be backward compatible a bit in dev status is defined, if the bit is
not set LKD will keep working with old PLL numbering.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In order to shorten the time cs lock is being held, we move any
possible work outside of the cs lock.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Add a little sleep between page unmappings in case mapping of
large number of host pages failed, in order to
avoid soft lockup bug during the rollback.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Update with latest version from the Firmware team.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Unsecure relevant registers as TPC engine need access to
TPC status.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The device can get into deadlock in case it use indirect mode for MSI
interrupts (multi-msi) and have hard-reset during interrupt storm.
To prevent that, always use direct mode which means single-msi mode.
The F/W will prevent the host from writing to the indirect MSI
registers to prevent any malicious user from causing this scenario.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In case the BMC of the devices' box wants to initiate a reset of
a specific device, it must go through driver.
Once driver will receive the request it will initiate a hard reset
flow.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In order to have a better debuggability we allow debugfs access
to user mmu mapped host memory. Non-user host memory access will be
rejected.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
fixed the following coccicheck:
./drivers/misc/habanalabs/common/sysfs.c:347:60-61: WARNING opportunity
for kobj_to_dev()
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Update to the latest version of the file as supplied by the F/W.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
if reset is due to heartbeat, device CPU is no responsive in which
case no point sending PCI disable message to it.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
As there are incorrect assumptions in which some of the
initialization and data path flows cannot sleep, most allocations
are being done using GFP_ATOMIC.
We modify the code to use GFP_ATOMIC only when realy needed, as
sleepable flow should use GFP_KERNEL.
In addition add a fallback to allocate memory using GFP_KERNEL,
once ATOMIC allocation fails.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Update to the latest definition of the firmware
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Add driver implementation for reading the current power from the device
CPU F/W.
Signed-off-by: Sagiv Ozeri <sozeri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Improve "vm" debugfs node to print also the virtual addresses which are
currently mapped to HW blocks in the device.
Signed-off-by: Sagiv Ozeri <sozeri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
For simplicity, use a single bringup flag indicating which FW
binaries should loaded to device.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Timeout in wait for interrupt is in 32-bit variable so we need to use
the correct maximum value to compare.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In order to support command submissions from user space, the driver
need to add support for user interrupt completions. The driver will
allow multiple user threads to wait for an interrupt and perform
a comparison with a given user address once interrupt expires.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In order to support user interrupts, driver must enable all MSI-X
interrupts for any case user will trigger them. We differentiate
between a valid user interrupt and a non valid one.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
As the F/wW is the first to detect out of sync event, a new event is
added to notify the driver on such event. In which case the driver
performs hard reset.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Because our graph contains network operations, we need to account
for delay in the network.
5 seconds timeout per CS is not enough to account for that.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Notify to the user that although he closed the FD, the device is
still in use because there are live CS and/or memory mappings (mmaps).
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Move the field to correct location in structure and remove comment.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
After any reset (soft or hard) the device (the engines/QMANs) should
be idle. If they are not idle, fail the reset. If it is soft-reset,
the driver will try to do hard-reset automatically. If it is hard-reset,
the driver will make the device non-operational.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The device is actually released only after the refcnt of the hpriv
structure is 0, which means all its contexts were closed.
If we reset the device while a context is still open, there are
possibilities for unexpected behavior and crashes. For example, if the
process has a mapping of a register block that is now currently being
reset, and the process writes/reads to that block during the reset,
the device can get stuck.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In order to support command submissions that are done directly from
user space, the driver must perform soft reset once user closes its FD.
In case the soft reset fails or device is not idle, a hard reset should
be performed.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
currently we support only 2 asids in all asics.
asid 0 for driver, and asic 1 for user.
no need to setup 1024 asids configurations at init phase.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Do not modify imgu_pipe->nodes[inode].vdev_fmt.fmt.pix_mp, until the
format has been correctly validated.
Otherwise, even if we use a backup variable, there is a period of time
where imgu_pipe->nodes[inode].vdev_fmt.fmt.pix_mp might have an invalid
value that can be used by other functions.
Cc: stable@vger.kernel.org
Fixes: ad91849996f9 ("media: staging/intel-ipu3: Fix set_fmt error handling")
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
We are losing the reference to an allocated memory if try. Change the
order of the check to avoid that.
Cc: stable@vger.kernel.org
Fixes: 6d5f26f2e045 ("media: staging/intel-ipu3-v4l: reduce kernel stack usage")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fix the following coverity warning:
This greater-than-or-equal-to-zero comparison of an unsigned value is
always true. "opcode >= 0".
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Building with 'make W=1' shows many warnings -Wempty-body warnings like
drivers/media/usb/dvb-usb/vp702x-fe.c: In function 'vp702x_fe_set_frontend':
drivers/media/usb/dvb-usb/vp702x-fe.c:190:46: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
190 | deb_fe("tuning succeeded.\n");
drivers/media/usb/dvb-usb/dtt200u.c: In function 'dtt200u_rc_query':
drivers/media/usb/dvb-usb/dtt200u.c:124:58: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
124 | deb_info("st->data: %*ph\n", 5, st->data);
drivers/media/usb/dvb-usb/m920x.c: In function 'm920x_rc_query':
drivers/media/usb/dvb-usb/m920x.c:207:58: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
207 | deb("Unknown rc key %02x\n", rc_state[1]);
Change the empty dprintk() macros to no_printk(), which avoids this
warning and adds format string checking.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Building with 'make W=1' shows many warnings -Wempty-body warnings like
drivers/media/common/b2c2/flexcop-misc.c: In function 'flexcop_determine_revision':
drivers/media/common/b2c2/flexcop-misc.c:35:85: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
35 | deb_info("this FlexCop has the 6 basic main hardware pid filter.\n");
drivers/media/usb/b2c2/flexcop-usb.c: In function 'flexcop_usb_process_frame':
drivers/media/usb/b2c2/flexcop-usb.c:357:79: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
357 | deb_ts("not ts packet %*ph\n", 4, b+2);
| ^
drivers/media/common/b2c2/flexcop-misc.c: In function 'flexcop_determine_revision':
drivers/media/common/b2c2/flexcop-misc.c:35:85: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
35 | deb_info("this FlexCop has the 6 basic main hardware pid filter.\n");
| ^
Change the empty dprintk() macros to no_printk(), which avoids this
warning and adds format string checking.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The Asus PN50 has 16 byte io region for the ITE8708 in its DSDT, which
causes the probe fail. So, accept larger regions.
Link: https://www.spinics.net/lists/linux-media/msg177725.html
Cc: Nikolaos Beredimas <beredim@gmail.com>
Reported-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
s/Hisilicon/HiSilicon/g.
It should use capital S, according to
https://www.hisilicon.com/en/terms-of-use.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The zte zx platform is getting removed, so this driver is no
longer needed.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
syzbot reported memory leak in dvb-usb. The problem was
in invalid error handling in dvb_usb_adapter_init().
for (n = 0; n < d->props.num_adapters; n++) {
....
if ((ret = dvb_usb_adapter_stream_init(adap)) ||
(ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs)) ||
(ret = dvb_usb_adapter_frontend_init(adap))) {
return ret;
}
...
d->num_adapters_initialized++;
...
}
In case of error in dvb_usb_adapter_dvb_init() or
dvb_usb_adapter_dvb_init() d->num_adapters_initialized won't be
incremented, but dvb_usb_adapter_exit() relies on it:
for (n = 0; n < d->num_adapters_initialized; n++)
So, allocated objects won't be freed.
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reported-by: syzbot+3c2be7424cea3b932b0e@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add keymaps and bindings for the simple IR (NEC) remotes used with
the MeCool KII-Pro and MeCool KIII-Pro Android STB devices.
Tested-by: Drazen Spio <drazsp@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
gcc-11 warns about the prototype not exactly matching the function
definition:
drivers/media/usb/dvb-usb/dvb-usb-remote.c:363:20: error: argument 2 of type ‘u8[5]’ {aka ‘unsigned char[5]’} with mismatched bound [-Werror=array-parameter=]
363 | u8 keybuf[5], u32 *event, int *state)
| ~~~^~~~~~~~~
In file included from drivers/media/usb/dvb-usb/dvb-usb-common.h:13,
from drivers/media/usb/dvb-usb/dvb-usb-remote.c:9:
drivers/media/usb/dvb-usb/dvb-usb.h:490:65: note: previously declared as ‘u8[]’ {aka ‘unsigned char[]’}
490 | extern int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *, u8[], u32 *, int *);
| ^~~~
Fixes: 776338e121b9 ("[PATCH] dvb: Add generalized dvb-usb driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
An earlier commit removed a call to lgdt3306a_spectral_inversion and
omitted to remove the error return check. The check on ret is now
redundant and can be removed.
Addresses-Coverity: ("Logically dead code")
Fixes: d4a3fa6652e3 ("media: dvb-frontends: lgdt3306a.c: remove dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The struct v4l2_subdev_format sd_fmt cannot be static since it can be
written back by the subdev. Just have it on the stack.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
pm_runtime_get_sync() will increase the runtime PM counter
even it returns an error. Thus a pairing decrement is needed
to prevent refcount leak. Fix this by replacing this API with
pm_runtime_resume_and_get(), which will not change the runtime
PM counter on error.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
