| Age | Commit message (Collapse) | Author |
|---|
|
A mistake has been made in the BIOS for some ASICs with NBIO 7.5.1
where some NBIO registers aren't properly setup.
Ensure that they're set during initialization.
Tested-by: Richard Gong <richard.gong@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Format the input and output CSC matrix so they
look like 3x4 matrixes. This will make parsing them
much easier and allows us to quickly spot potential
mistakes.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This will let us pass the kms_hdr.bpc_switch IGT
test.
The reason the bpc restriction was required is
historical. At one point in time we were not falling
back to a lower bpc when we didn't have enough
bandwidth for the maximum bpc reported by a display.
This meant that we couldn't enable some high refresh
modes unless we limitted the bpc.
Starting with this patch the issue is fixed:
commit cbd14ae7ea93 ("drm/amd/display: Fix
incorrectly pruned modes with deep color")
This patch implemented a fallback mechanism if mode
validation failed at the max bpc. This means users
now automatically get all modes that can be supported
by at least 6 bpc. The driver will enable the mode
with the highest possible bpc that is supported by
the display.
v2:
- explain why this is no longer needed (Michel)
- refer to commit that fixed bpc fallback (Michel)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: Michel Dänzer <michel.daenzer@mailbox.org>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
variable
Fixes following warnings:
warning: no previous prototype for 'umc_v8_10_convert_error_address'
warning: variable 'channel_index' set but not used
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is a potential race condition in amdtee_open_session that may
lead to use-after-free. For instance, in amdtee_open_session() after
sess->sess_mask is set, and before setting:
sess->session_info[i] = session_info;
if amdtee_close_session() closes this same session, then 'sess' data
structure will be released, causing kernel panic when 'sess' is
accessed within amdtee_open_session().
The solution is to set the bit sess->sess_mask as the last step in
amdtee_open_session().
Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver")
Cc: stable@vger.kernel.org
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This rather small set of changes includes some minor fixes and
improvements.
The AB8500 driver gained support for reading the initial hardware
state and the Synopsys DesignWare driver received some work to prepare
for device tree and platform support"
* tag 'pwm/for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: dwc: Use devm_pwmchip_add()
pwm: dwc: Move memory allocation to own function
pwm: dwc: Change &pci->dev to dev in probe
dt-bindings: pwm: Document Synopsys DesignWare snps,pwm-dw-apb-timers-pwm2
pwm: iqs620a: Replace one remaining instance of regmap_update_bits()
pwm: ab8500: Implement .get_state()
pwm: ab8500: Fix calculation of duty and period
pwm: lp3943: Drop unused i2c include
dt-bindings: pwm: mediatek: Convert pwm-mediatek to DT schema
pwm: stm32-lp: fix the check on arr and cmp registers update
pwm: Move pwm_capture() dummy to restore order
pwm: sifive: Always let the first pwm_apply_state succeed
|
|
This reverts commit 67b7836d4458790f1261e31fe0ce3250989784f0.
The locking appears incomplete. A caller of SHMEM helper's pin
function never acquires the dma-buf reservation lock. So we get
WARNING: CPU: 3 PID: 967 at drivers/gpu/drm/drm_gem_shmem_helper.c:243 drm_gem_shmem_pin+0x42/0x90 [drm_shmem_helper]
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230228152612.19971-1-tzimmermann@suse.de
|
|
Fix warn: iterator used outside loop: 'xfer'. 'xfer' variable contain
invalid value in few conditions. Complete transfer within DATA phase
in successful case and at the end for failed transfer.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link:https://lore.kernel.org/all/202210191211.46FkzKmv-lkp@intel.com/
Fixes: 8777dd9dff40 ("spi: tegra210-quad: Fix combined sequence")
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Link: https://lore.kernel.org/r/20230227200428.45832-1-kyarlagadda@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The kernel always logs the unique subsystem name for a discovery
controller, even in the case user space asked for the well known.
This has lead to confusion as the logs of nvme-cli and the kernel
logs didn't match.
First, nvme-cli connects to the well known discovery controller to
figure out if it supports TP8013. If so then nvme-cli disconnects and
connects to the unique discovery controller. Currently, the kernel show
that user space connected twice to the unique one.
To avoid further confusion, show the well known discovery controller if
user space asked for it:
$ nvme connect-all -v -t tcp -a 192.168.0.1
nvme0: nqn.2014-08.org.nvmexpress.discovery connected
nvme0: nqn.2014-08.org.nvmexpress.discovery disconnected
nvme0: nqn.discovery connected
kernel log:
nvme nvme0: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 192.168.0.1:8009
nvme nvme0: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery"
nvme nvme0: new ctrl: NQN "nqn.discovery", addr 192.168.0.1:8009
Fixes: e5ea42faa773 ("nvme: display correct subsystem NQN")
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
While the error recovery work is temporarily failing reconnect attempts,
running the 'nvme list' command causes a kernel NULL pointer dereference
by calling getsockname() with a released socket.
During error recovery work, the nvme tcp socket is released and a new one
created, so it is not safe to access the socket without proper check.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Fixes: 02c57a82c008 ("nvme-tcp: print actual source IP address through sysfs "address" attr")
Reviewed-by: Martin Belanger <martin.belanger@dell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This function was transitioned from returning NVMe status codes to
returning traditional kernel error codes. However, this particular
return now accidentally returns positive error codes like ENOMEM instead
of negative -ENOMEM.
Fixes: b0ef1b11d390 ("nvme-auth: don't use NVMe status codes")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Bring back the check of the Identify Namespace return value for the
legacy NVMe 1.0-style sequential scanning. While NVMe 1.0 does not
support namespace management, there are "modern" cloud solutions like
Google Cloud Platform that claim the obsolete 1.0 compliance for no
good reason while supporting proprietary sideband namespace management.
Fixes: 1a893c2bfef4 ("nvme: refactor namespace probing")
Reported-by: Nils Hanke <nh@edgeless.systems>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Nils Hanke <nh@edgeless.systems>
|
|
If genphy_c45_read_eee_adv() fails then we need to do a reset and unlock
the &phydev->lock mutex before returning.
Fixes: 3eeca4e199ce ("net: phy: do not force EEE support")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/Y/x/6kHCjnQHqOpF@kili
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
fdp_nci_i2c_read_device_properties
devm_kmalloc_array may fails, *fw_vsc_cfg might be null and cause
out-of-bounds write in device_property_read_u8_array later.
Fixes: a06347c04c13 ("NFC: Add Intel Fields Peak NFC solution driver")
Signed-off-by: Kang Chen <void0red@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230227093037.907654-1-void0red@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
While bringing hardware up we should perform a full reset including the
switch bit (BGMAC_BCMA_IOCTL_SW_RESET aka SICF_SWRST). It's what
specification says and what reference driver does.
This seems to be critical for the BCM5358. Without this hardware doesn't
get initialized properly and doesn't seem to transmit or receive any
packets.
Originally bgmac was calling bgmac_chip_reset() before setting
"has_robosw" property which resulted in expected behaviour. That has
changed as a side effect of adding platform device support which
regressed BCM5358 support.
Fixes: f6a95a24957a ("net: ethernet: bgmac: Add platform device support")
Cc: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230227091156.19509-1-zajec5@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The referenced commit added a wrapper for drm_gem_shmem_get_pages_sgt(),
but in the process it accidentally changed the export type from GPL to
non-GPL. Switch it back to GPL.
Reported-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Fixes: ddddedaa0db9 ("drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230227-shmem-export-fix-v1-1-8880b2c25e81@asahilina.net
|
|
Clang warns (or errors with CONFIG_WERROR):
../drivers/gpu/drm/omapdrm/omap_fbdev.c:235:6: error: variable 'helper' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (!fbdev)
^~~~~~
../drivers/gpu/drm/omapdrm/omap_fbdev.c:259:26: note: uninitialized use occurs here
drm_fb_helper_unprepare(helper);
^~~~~~
../drivers/gpu/drm/omapdrm/omap_fbdev.c:235:2: note: remove the 'if' if its condition is always false
if (!fbdev)
^~~~~~~~~~~
../drivers/gpu/drm/omapdrm/omap_fbdev.c:228:30: note: initialize the variable 'helper' to silence this warning
struct drm_fb_helper *helper;
^
= NULL
1 error generated.
Return early, as there is nothing for the function to do if memory
cannot be allocated. There is no point in adding another label to just
emit the warning at the end of the function in this case, as memory
allocation failures are already logged.
Fixes: 3fb1f62f80a1 ("drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini()")
Link: https://github.com/ClangBuiltLinux/linux/issues/1809
Link: https://lore.kernel.org/oe-kbuild-all/202302250058.fYTe9aTP-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230224-omapdrm-wsometimes-uninitialized-v1-1-3fec8906ee3a@kernel.org
|
|
The attempt to add DMA alignment padding by moving IV to the front
of edesc was completely broken as it didn't change the places where
edesc was freed.
It's also wrong as the IV may still share a cache-line with the
edesc.
Fix this by restoring the original layout and simply reserving
enough memmory so that the IV is on a DMA cache-line by itself.
Reported-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Fixes: 199354d7fb6e ("crypto: caam - Remove GFP_DMA and add DMA alignment padding")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The error codes are not set on these error paths.
Fixes: 145eed48de27 ("fbdev: Remove conflicting devices on PCI bus")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y/yG+sm2mhdJeTZW@kili
|
|
Commit 226fae124b2d ("vc_screen: move load of struct vc_data pointer in
vcs_read() to avoid UAF") moved the call to vcs_vc() into the loop.
While doing this it also moved the unconditional assignment of
ret = -ENXIO;
This unconditional assignment was valid outside the loop but within it
it clobbers the actual value of ret.
To avoid this only assign "ret = -ENXIO" when actually needed.
[ Also, the 'goto unlock_out" needs to be just a "break", so that it
does the right thing when it exits on later iterations when partial
success has happened - Linus ]
Reported-by: Storm Dragon <stormdragon2976@gmail.com>
Link: https://lore.kernel.org/lkml/Y%2FKS6vdql2pIsCiI@hotmail.com/
Fixes: 226fae124b2d ("vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/64981d94-d00c-4b31-9063-43ad0a384bde@t-8ch.de/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Restore the vcs_size() handling in vcs_read() to what
it had been in previous version.
Fixes: 226fae124b2d ("vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF")
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It has become common practice to refer to the drm_i915_private
structures as "i915". However, there are still instances where
they are referred to as "dev_priv". This inconsistency can make
grepping for information more difficult and does not maintain a
cohesive style throughout the code.
Rename all the "dev_priv" structures in the gt/* directory to
"i915".
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230210150344.1066991-1-andi.shyti@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
The notable fixes here are the EEE fix which restores boot for many
embedded platforms (real and QEMU); WiFi warning suppression and the
ICE Kconfig cleanup.
Current release - regressions:
- phy: multiple fixes for EEE rework
- wifi: wext: warn about usage only once
- wifi: ath11k: allow system suspend to survive ath11k
Current release - new code bugs:
- mlx5: Fix memory leak in IPsec RoCE creation
- ibmvnic: assign XPS map to correct queue index
Previous releases - regressions:
- netfilter: ip6t_rpfilter: Fix regression with VRF interfaces
- netfilter: ctnetlink: make event listener tracking global
- nf_tables: allow to fetch set elements when table has an owner
- mlx5:
- fix skb leak while fifo resync and push
- fix possible ptp queue fifo use-after-free
Previous releases - always broken:
- sched: fix action bind logic
- ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also
uses a mutex
- netfilter: conntrack: fix rmmod double-free race
- netfilter: xt_length: use skb len to match in length_mt6, avoid
issues with BIG TCP
Misc:
- ice: remove unnecessary CONFIG_ICE_GNSS
- mlx5e: remove hairpin write debugfs files
- sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
* tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
tcp: tcp_check_req() can be called from process context
net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard
xen-netback: remove unused variables pending_idx and index
net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy
net: dsa: ocelot_ext: remove unnecessary phylink.h include
net: mscc: ocelot: fix duplicate driver name error
net: dsa: felix: fix internal MDIO controller resource length
net: dsa: seville: ignore mscc-miim read errors from Lynx PCS
net/sched: act_sample: fix action bind logic
net/sched: act_mpls: fix action bind logic
net/sched: act_pedit: fix action bind logic
wifi: wext: warn about usage only once
wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue
qede: avoid uninitialized entries in coal_entry array
nfc: fix memory leak of se_io context in nfc_genl_se_io
ice: remove unnecessary CONFIG_ICE_GNSS
net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy()
ibmvnic: Assign XPS map to correct queue index
docs: net: fix inaccuracies in msg_zerocopy.rst
tools: net: add __pycache__ to gitignore
...
|
|
This is useful to understand the bpc defaults and
support of a driver.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Reviewed-By: Joshua Ashton <joshua@froggi.es>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113162428.33874-3-harry.wentland@amd.com
|
|
The EDID of an HDR display defines EOTFs that are supported
by the display and can be set in the HDR metadata infoframe.
Userspace is expected to read the EDID and set an appropriate
HDR_OUTPUT_METADATA.
In drm_parse_hdr_metadata_block the kernel reads the supported
EOTFs from the EDID and stores them in the
drm_connector->hdr_sink_metadata. While doing so it also
filters the EOTFs to the EOTFs the kernel knows about.
When an HDR_OUTPUT_METADATA is set it then checks to
make sure the EOTF is a supported EOTF. In cases where
the kernel doesn't know about a new EOTF this check will
fail, even if the EDID advertises support.
Since it is expected that userspace reads the EDID to understand
what the display supports it doesn't make sense for DRM to block
an HDR_OUTPUT_METADATA if it contains an EOTF the kernel doesn't
understand.
This comes with the added benefit of future-proofing metadata
support. If the spec defines a new EOTF there is no need to
update DRM and an compositor can immediately make use of it.
Bug: https://gitlab.freedesktop.org/wayland/weston/-/issues/609
v2: Distinguish EOTFs defind in kernel and ones defined
in EDID in the commit description (Pekka)
v3: Rebase; drm_hdmi_infoframe_set_hdr_metadata moved
to drm_hdmi_helper.c
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-By: Joshua Ashton <joshua@froggi.es>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113162428.33874-2-harry.wentland@amd.com
|
|
arm:cubieboard
Without proper initialization, "changed" returned random numbers and caused
interface initialization failures.
Fixes: 022c3f87f88e ("net: phy: add genphy_c45_ethtool_get/set_eee() support")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230225071644.2754893-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
building with gcc and W=1 reports
drivers/net/xen-netback/netback.c:886:21: error: variable
‘pending_idx’ set but not used [-Werror=unused-but-set-variable]
886 | u16 pending_idx;
| ^~~~~~~~~~~
pending_idx is not used so remove it. Since index was only
used to set pending_idx, remove index as well.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230226163429.2351600-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.3
First set of fixes for v6.3. We have only three oneliners. The most
important one is the patch reducing warnings about the Wireless
Extensions usage, reported by Linus.
* tag 'wireless-2023-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: wext: warn about usage only once
wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue
wifi: ath11k: allow system suspend to survive ath11k
====================
Link: https://lore.kernel.org/r/20230227131053.BD779C433D2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Extend slot-gpio to be used for host specific card detect interrupts
- Align to common busy polling behaviour for mmc ioctls
- Suggest the BFQ I/O scheduler to be built along with MMC/SD support
- Add devm_mmc_alloc_host() to enable further cleanups in host drivers
MMC host:
- atmel-mci: Fix race condition when stopping/starting a command
- dw_mmc-starfive: Add new driver to support the StarFive JH7110 variant
- dw_mmc-rockchip: Add support for the RK3588 variant
- jz4740: Add support for the vqmmc power supply
- meson-gx: Convert the DT bindings to the dt-schema
- meson-gx: Enable the platform interrupt to be used for card detect
- moxart: Set the supported maximum request/block/segment sizes
- renesas,sdhi: Add support for the RZ/V2M variants
- sdhci: Rework code to drop SDHCI_QUIRK_MISSING_CAPS
- sdhci-esdhc-imx: Improve tuning logic support
- sdhci-msm: Add support for the IPQ5332 and the IPQ9574 variants
- sdhci-of-dwcmshc: Add the missing device table IDs for acpi
- sdhci-of-dwcmshc: Improve clock support for the Rockchip variant
- sdhci-of-dwcmshc: Enable support of V4 host for the BlueField-3 variant
- sdhci-pxav2: Add support for the PXA168 V1 variant
- sdhci-pxav2: Add support for SDIO IRQs for the PXA168 V1 variant
- uniphier-sd: Add support for SD UHS-I speed modes"
* tag 'mmc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
mmc: meson-gx: Use devm_platform_get_and_ioremap_resource()
mmc: meson-gx: constify member data of struct meson_host
mmc: meson-gx: use devm_clk_get_enabled() for core clock
mmc: core: fix return value check in devm_mmc_alloc_host()
dt-bindings: mmc: meson-gx: fix interrupt binding
mmc: meson-gx: support platform interrupt as card detect interrupt
dt-bindings: mmc: meson-gx: support specifying cd interrupt
mmc: core: support setting card detect interrupt from drivers
mmc: starfive: Add sdio/emmc driver support
dt-bindings: mmc: Add StarFive MMC module
dt-bindings: mmc: sdhci-msm: Allow 1 icc path
dt-bindings: mmc: rockchip-dw-mshc: Add RK3588 compatible string
mmc: core: Align to common busy polling behaviour for mmc ioctls
dt-bindings: mmc: Add resets property to cadence SDHCI binding
mmc: meson-gx: remove meson_mmc_get_cd
mmc: moxart: set maximum request/block/segment sizes
mmc: sdhci-brcmstb: Use devm_platform_get_and_ioremap_resource()
mmc: sdhci-of-dwcmshc: add the missing device table IDs for acpi
mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for rockchip platform
mmc: jz4740: Add support for vqmmc power supply
...
|
|
The bspec was updated with a minor change to the 'DCC mode select'
setting to be programmed during combo PHY initialization.
v2:
- Keep the opencoded rmw behavior instead of switching to
intel_de_rmw(). We need to read from a _LN register, but write to
the _GRP register to update all lanes.
Bspec: 49291
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230221201836.2886794-1-matthew.d.roper@intel.com
|
|
Currently we schedule a call to output_poll_execute from
drm_kms_helper_poll_enable for 10s in future. Later we try to replace
that in drm_helper_probe_single_connector_modes with a 0s schedule with
delayed_event set.
But as there is already a job in the queue this fails, and the immediate
job we wanted with delayed_event set doesn't occur until 10s later.
And that call acts as if connector state has changed, reprobing modes.
This has a side effect of waking up a display that has been blanked.
Make sure we cancel the old job before submitting the immediate one.
Fixes: 162b6a57ac50 ("drm/probe-helper: don't lose hotplug event")
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
[Maxime: Switched to mod_delayed_work]
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127154052.452524-1-maxime@cerno.tech
|
|
Introduce a new ap queue status register wrapper union to access register
wide values. So the inline assembler only sees register wide values but the
surrounding code may use a more structured view of the same value and a
reader of the code (and the compiler) gets a clear understanding about the
mapping between fields and register values.
All the changes to access the ap queue status are local to the inline
functions within ap.h. However, the struct ap_qirq_ctrl has been replaces
by a union for same reason and this needed slight adaptions in the calling
code.
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Suggested-by: Andreas Arnez <arnez@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The log entries are stored in le32, so use appropriate byte swapping
macros.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202302242222.PevBhzvC-lkp@intel.com/
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
On SH, devm_clk_get_optional_enabled() fails with -EINVAL if the clock
is not found. This happens because __devm_clk_get() assumes it can pass
a NULL clock pointer (as returned by clk_get_optional()) to the init()
function (clk_prepare_enable() in this case), while the SH
implementation of clk_enable() considers that an error.
Fix this by making the SH clk_enable() implementation return zero
instead, like the Common Clock Framework does.
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/b53e6b557b4240579933b3359dda335ff94ed5af.1675354849.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
Replace all drm-shmem locks with a GEM reservation lock. This makes locks
consistent with dma-buf locking convention where importers are responsible
for holding reservation lock for all operations performed over dma-bufs,
preventing deadlock between dma-buf importers and exporters.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/all/20230108210445.3948344-8-dmitry.osipenko@collabora.com/
|
|
DMA-buf core has its own refcounting of vmaps, use it instead of drm-shmem
counting. This change prepares drm-shmem for addition of memory shrinker
support where drm-shmem will use a single dma-buf reservation lock for
all operations performed over dma-bufs.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/all/20230108210445.3948344-7-dmitry.osipenko@collabora.com/
|
|
Ease debugging of a multi-GPU system by using drm_WARN_*() and
drm_dbg_kms() helpers that print out DRM device name corresponding
to shmem GEM.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/all/20230108210445.3948344-6-dmitry.osipenko@collabora.com/
|
|
Add new common evict() callback to drm_gem_object_funcs and corresponding
drm_gem_object_evict() helper. This is a first step on a way to providing
common GEM-shrinker API for DRM drivers.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/all/20230108210445.3948344-4-dmitry.osipenko@collabora.com/
|
|
Lockdep warns about potential circular locking dependency of devfreq
with the fs_reclaim caused by immediate device suspension when mapping is
released by shrinker. Fix it by doing the suspension asynchronously.
Reviewed-by: Steven Price <steven.price@arm.com>
Fixes: ec7eba47da86 ("drm/panfrost: Rework page table flushing and runtime PM interaction")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/all/20230108210445.3948344-3-dmitry.osipenko@collabora.com/
|
|
Consider this scenario:
1. APP1 continuously creates lots of small GEMs
2. APP2 triggers `drop_caches`
3. Shrinker starts to evict APP1 GEMs, while APP1 produces new purgeable
GEMs
4. msm_gem_shrinker_scan() returns non-zero number of freed pages
and causes shrinker to try shrink more
5. msm_gem_shrinker_scan() returns non-zero number of freed pages again,
goto 4
6. The APP2 is blocked in `drop_caches` until APP1 stops producing
purgeable GEMs
To prevent this blocking scenario, check number of remaining pages
that GPU shrinker couldn't release due to a GEM locking contention
or shrinking rejection. If there are no remaining pages left to shrink,
then there is no need to free up more pages and shrinker may break out
from the loop.
This problem was found during shrinker/madvise IOCTL testing of
virtio-gpu driver. The MSM driver is affected in the same way.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b352ba54a820 ("drm/msm/gem: Convert to using drm_gem_lru")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/all/20230108210445.3948344-2-dmitry.osipenko@collabora.com/
|
|
The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL terminated strings.
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/202212070913161959936@zte.com.cn
|
|
Currently we only parse the Tiled Display Topology Data Block for
DisplayID structure version 1.2, but not 2.0. The contents seem to be
the same for both, so expand the parsing to structure version 2.0.
Note that DisplayID spec version is not the same as DisplayID structure
version; DisplayID 1.3 uses structure version 1.2, and DisplayID 2.0-2.1
use structure version 2.0. Lovely.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230217104627.1360015-1-jani.nikula@intel.com
|
|
Use the DisplayID 2.0 primary use case information to deduce whether
this is a head-mounted display, and should not be used for desktop.
Cc: Iaroslav Boliukin <iam@lach.pw>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> # HTC VIVE Pro 2
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/de75b2edddd7d30216e4dd5699a064dc737688f5.1676580180.git.jani.nikula@intel.com
|
|
The DisplayID structure version and primary use case are stored in the
DisplayID Base Section. We should be checking them in a number of places
when parsing the DisplayID blocks. Currently, we completely ignore the
primary use case, and just look at the block tags without cross-checking
against structure version.
Store the version and primary use case in the DisplayID iterator, and
provide accessors to them. In general, the information is needed when
iterating the blocks, and this is a convenient place to both store and
retrieve the information during parsing.
Promote using accessors rather than users poking at the iterator
directly.
Cc: Iaroslav Boliukin <iam@lach.pw>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ad8a35c109f97ffe115e6b18e4a132b592f11089.1676580180.git.jani.nikula@intel.com
|
|
Avoid figuring out the header pointer multiple times.
Cc: Iaroslav Boliukin <iam@lach.pw>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e840c744d165608a41db5a5e2bd4b0205783c697.1676580180.git.jani.nikula@intel.com
|
|
Add a helper to get a pointer to struct displayid_header. To be
pedantic, add buffer overflow checks to not touch the base if that
itself would overflow.
Cc: Iaroslav Boliukin <iam@lach.pw>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4a03b3a5132642d3cdb6d4c2641422955a917292.1676580180.git.jani.nikula@intel.com
|
|
drm_gem_shmem_mmap() doesn't own reference in error code path, resulting
in the dma-buf shmem GEM object getting prematurely freed leading to a
later use-after-free.
Fixes: f49a51bfdc8e ("drm/shme-helpers: Fix dma_buf_mmap forwarding bug")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230108211311.3950107-1-dmitry.osipenko@collabora.com
|
|
The "vdev->dev.parent" should be used instead of "vdev->dev" as a device
for which to perform the DMA operation in both
virtio_gpu_cmd_transfer_to_host_2d(3d).
Because the virtio-gpu device "vdev->dev" doesn't really have DMA OPS
assigned to it, but parent (virtio-pci or virtio-mmio) device
"vdev->dev.parent" has. The more, the sgtable in question the code is
trying to sync here was mapped for the parent device (by using its DMA OPS)
previously at:
virtio_gpu_object_shmem_init()->drm_gem_shmem_get_pages_sgt()->
dma_map_sgtable(), so should be synced here for the same parent device.
Fixes: b5c9ed70d1a9 ("drm/virtio: Improve DMA API usage for shmem BOs")
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230224153450.526222-1-olekstysh@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Support for PRU clients to acquire a control reference to the PRU
instances is introduced, and the PRU now allows specifying
firmware-name in Devicetree. sysfs is requested to be read-only when
the remoteproc instance is consumed by another kernel driver
- Support for the C7xv DSP on AM62A SoC is introduced
- The Devicetree binding for the Qualcomm PAS devices are split up in
multiple files, to better account for the differences in resources
between them. A number of missing Devicetree bindings are added, and
the Qualcomm WCNSS binding is converted to YAML
- A few cleanups are introduced for the Mediatek SCP driver. And a
sanity check of the firmware image is introduced in the Mediatek
driver
- For Qualcomm SC7280 ADSP support is added, MSM8953 gains ADSP and
modem support, SM6115 and SM8550 gains ADSP, CDSP and modem support,
and support for pronto v3 support (used on e.g. MSM8953) is added
- The Qualcomm modem remoteproc driver is modified to use a no-map
reserved-memory region for it's authentication metadata, in order to
avoid fatal security violations caused by accesses from Linux during
the authentication process
- Support for separate loading of a Devicetree blob is added to the PAS
driver, and support for the PAS driver to carve out DSM memory for
the modem is added as well
- The Qualcomm ADSP remoteproc driver gains support for mapping memory
into specific range using the IOMMU. The sysmon driver is
transitioned to strlcpy()
* tag 'rproc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (69 commits)
dt-bindings: mailbox: qcom,apcs-kpss-global: drop mbox-names from example
dt-bindings: remoteproc: qcom,glink-edge: correct label description
dt-bindings: remoteproc: qcom,glink-rpm-edge: convert to DT schema
dt-bindings: remoteproc: qcom,sm8550-pas: correct power domains
remoteproc: qcom_q6v5_pas: enable sm8550 adsp & cdsp autoboot
dt-bindings: remoteproc: qcom: Add sm6115 pas yaml file
remoteproc: qcom: pas: Add sm6115 remoteprocs
remoteproc: qcom: pas: Adjust the phys addr wrt the mem region
remoteproc: qcom: fix sparse warnings
remoteproc: qcom: replace kstrdup with kstrndup
remoteproc: mediatek: Check the SCP image format
remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers
Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use"
dt-bindings: remoteproc: qcom,sc7280-mss-pil: Update memory-region
dt-bindings: remoteproc: qcom,sc7180-mss-pil: Update memory-region
dt-bindings: remoteproc: qcom,msm8996-mss-pil: Update memory region
dt-bindings: remoteproc: qcom,q6v5: Move MSM8996 to schema
remoteproc: qcom_q6v5_pas: add sm8550 adsp, cdsp & mpss compatible & data
remoteproc: qcom_q6v5_pas: add support for assigning memory to firmware
remoteproc: qcom_q6v5_pas: add support for dtb co-firmware loading
...
|
