summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-07-24extcon: sm5502: Add IRQ_ONESHOTVasyl Gomonovych
Do not fire irq again until thread done Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-24extcon: gpio: Request reasonable interruptsLinus Walleij
The only thing that makes sense is to request a falling edge interrupt if the line is active low and a rising edge interrupt if the line is active high, so just do that and get rid of the assignment from platform data. The GPIO descriptor knows if the line is active high or low. Also make irq a local variable in probe(), it's not used anywhere else. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [cw00.choi: Fix build error of data->irq_flags] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-24extcon: fsa9480: Support the FSA880 variantLinus Walleij
The older compatible variant of this chip is called FSA880 and works the same way, if we need some quirks in the future, it is good to let it have its own compatible string. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-24extcon: extcon-max77843: convert to i2c_new_dummy_deviceWolfram Sang
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-24extcon: arizona: Switch to use device_property_count_u32()Andy Shevchenko
Use use device_property_count_u32() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-24Input: elantech - annotate fall-through case in elantech_use_host_notify()Dmitry Torokhov
This avoids a warning when building with -Wimplicit-fallthrough. Fixes: 883a2a80f79c ("Input: elantech - enable SMBus on new (2018+) systems") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-24fpga-manager: altera-ps-spi: Fix build errorYueHaibing
If BITREVERSE is m and FPGA_MGR_ALTERA_PS_SPI is y, build fails: drivers/fpga/altera-ps-spi.o: In function `altera_ps_write': altera-ps-spi.c:(.text+0x4ec): undefined reference to `byte_rev_table' Select BITREVERSE to fix this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: fcfe18f885f6 ("fpga-manager: altera-ps-spi: use bitrev8x4") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Cc: stable <stable@vger.kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Link: https://lore.kernel.org/r/20190708071356.50928-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-24mei: me: add mule creek canyon (EHL) device idsAlexander Usyskin
Add Mule Creek Canyon (PCH) MEI device ids for Elkhart Lake (EHL) Platform. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190712095814.20746-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-24can: peak_usb: fix potential double kfree_skb()Stephane Grosjean
When closing the CAN device while tx skbs are inflight, echo skb could be released twice. By calling close_candev() before unlinking all pending tx urbs, then the internal echo_skb[] array is fully and correctly cleared before the USB write callback and, therefore, can_get_echo_skb() are called, for each aborted URB. Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core") Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-24can: flexcan: fix stop mode acknowledgmentJoakim Zhang
To enter stop mode, the CPU should manually assert a global Stop Mode request and check the acknowledgment asserted by FlexCAN. The CPU must only consider the FlexCAN in stop mode when both request and acknowledgment conditions are satisfied. Fixes: de3578c198c6 ("can: flexcan: add self wakeup support") Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Cc: linux-stable <stable@vger.kernel.org> # >= v5.0 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-24can: flexcan: fix an use-after-free in flexcan_setup_stop_mode()Wen Yang
The gpr_np variable is still being used in dev_dbg() after the of_node_put() call, which may result in use-after-free. Fixes: de3578c198c6 ("can: flexcan: add self wakeup support") Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: linux-stable <stable@vger.kernel.org> # >= v5.0 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-24can: mcp251x: add error check when wq alloc failedWeitao Hou
add error check when workqueue alloc failed, and remove redundant code to make it clear. Fixes: e0000163e30e ("can: Driver for the Microchip MCP251x SPI CAN controllers") Signed-off-by: Weitao Hou <houweitaoo@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Tested-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-24can: rcar_canfd: fix possible IRQ storm on high loadNikita Yushchenko
We have observed rcar_canfd driver entering IRQ storm under high load, with following scenario: - rcar_canfd_global_interrupt() in entered due to Rx available, - napi_schedule_prep() is called, and sets NAPIF_STATE_SCHED in state - Rx fifo interrupts are masked, - rcar_canfd_global_interrupt() is entered again, this time due to error interrupt (e.g. due to overflow), - since scheduled napi poller has not yet executed, condition for calling napi_schedule_prep() from rcar_canfd_global_interrupt() remains true, thus napi_schedule_prep() gets called and sets NAPIF_STATE_MISSED flag in state, - later, napi poller function rcar_canfd_rx_poll() gets executed, and calls napi_complete_done(), - due to NAPIF_STATE_MISSED flag in state, this call does not clear NAPIF_STATE_SCHED flag from state, - on return from napi_complete_done(), rcar_canfd_rx_poll() unmasks Rx interrutps, - Rx interrupt happens, rcar_canfd_global_interrupt() gets called and calls napi_schedule_prep(), - since NAPIF_STATE_SCHED is set in state at this time, this call returns false, - due to that false return, rcar_canfd_global_interrupt() returns without masking Rx interrupt - and this results into IRQ storm: unmasked Rx interrupt happens again and again is misprocessed in the same way. This patch fixes that scenario by unmasking Rx interrupts only when napi_complete_done() returns true, which means it has cleared NAPIF_STATE_SCHED in state. Fixes: dd3bd23eb438 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-24can: dev: call netif_carrier_off() in register_candev()Rasmus Villemoes
CONFIG_CAN_LEDS is deprecated. When trying to use the generic netdev trigger as suggested, there's a small inconsistency with the link property: The LED is on initially, stays on when the device is brought up, and then turns off (as expected) when the device is brought down. Make sure the LED always reflects the state of the CAN device. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-24binder: prevent transactions to context manager from its own process.Hridya Valsaraju
Currently, a transaction to context manager from its own process is prevented by checking if its binder_proc struct is the same as that of the sender. However, this would not catch cases where the process opens the binder device again and uses the new fd to send a transaction to the context manager. Reported-by: syzbot+8b3c354d33c4ac78bfad@syzkaller.appspotmail.com Signed-off-by: Hridya Valsaraju <hridya@google.com> Acked-by: Todd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190715191804.112933-1-hridya@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-24binder: Set end of SG buffer area properly.Martijn Coenen
In case the target node requests a security context, the extra_buffers_size is increased with the size of the security context. But, that size is not available for use by regular scatter-gather buffers; make sure the ending of that buffer is marked correctly. Acked-by: Todd Kjos <tkjos@google.com> Fixes: ec74136ded79 ("binder: create node flag to request sender's security context") Signed-off-by: Martijn Coenen <maco@android.com> Cc: stable@vger.kernel.org # 5.1+ Link: https://lore.kernel.org/r/20190709110923.220736-1-maco@android.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-24ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7Tony Lindgren
We are currently using a wrong register for dcan revision. Although this is currently only used for detecting the dcan module, let's fix it to avoid confusion. Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-07-24bus: ti-sysc: Fix using configured sysc mask valueTony Lindgren
We have cases where there are no softreset bits like with am335x lcdc. In that case ti,sysc-mask = <0> needs to be handled properly. Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-07-24bus: ti-sysc: Fix handling of forced idleTony Lindgren
For some devices we can get the following warning on boot: ti-sysc 48485200.target-module: sysc_disable_module: invalid midlemode Fix this by treating SYSC_IDLE_FORCE like we do for the other bits for idlemodes mask. Fixes: d59b60564cbf ("bus: ti-sysc: Add generic enable/disable functions") Cc: Roger Quadros <rogerq@ti.com> Reviewed-by: Suman Anna <s-anna@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-07-23scsi: scsi_dh_alua: always use a 2 second delay before retrying RTPGHannes Reinecke
Retrying immediately after we've received a 'transitioning' sense code is pretty much pointless, we should always use a delay before retrying. So ensure the default delay is applied before retrying. Signed-off-by: Hannes Reinecke <hare@suse.com> Tested-by: Zhangguanghui <zhang.guanghui@h3c.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-23scsi: ibmvfc: fix WARN_ON during event pool releaseTyrel Datwyler
While removing an ibmvfc client adapter a WARN_ON like the following WARN_ON is seen in the kernel log: WARNING: CPU: 6 PID: 5421 at ./include/linux/dma-mapping.h:541 ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc] CPU: 6 PID: 5421 Comm: rmmod Tainted: G E 4.17.0-rc1-next-20180419-autotest #1 NIP: d00000000290328c LR: d00000000290325c CTR: c00000000036ee20 REGS: c000000288d1b7e0 TRAP: 0700 Tainted: G E (4.17.0-rc1-next-20180419-autotest) MSR: 800000010282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 44008828 XER: 20000000 CFAR: c00000000036e408 SOFTE: 1 GPR00: d00000000290325c c000000288d1ba60 d000000002917900 c000000289d75448 GPR04: 0000000000000071 c0000000ff870000 0000000018040000 0000000000000001 GPR08: 0000000000000000 c00000000156e838 0000000000000001 d00000000290c640 GPR12: c00000000036ee20 c00000001ec4dc00 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 00000100276901e0 0000000010020598 GPR20: 0000000010020550 0000000010020538 0000000010020578 00000000100205b0 GPR24: 0000000000000000 0000000000000000 0000000010020590 5deadbeef0000100 GPR28: 5deadbeef0000200 d000000002910b00 0000000000000071 c0000002822f87d8 NIP [d00000000290328c] ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc] LR [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc] Call Trace: [c000000288d1ba60] [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc] (unreliable) [c000000288d1baf0] [d000000002909390] ibmvfc_abort_task_set+0x7b0/0x8b0 [ibmvfc] [c000000288d1bb70] [c0000000000d8c68] vio_bus_remove+0x68/0x100 [c000000288d1bbb0] [c0000000007da7c4] device_release_driver_internal+0x1f4/0x2d0 [c000000288d1bc00] [c0000000007da95c] driver_detach+0x7c/0x100 [c000000288d1bc40] [c0000000007d8af4] bus_remove_driver+0x84/0x140 [c000000288d1bcb0] [c0000000007db6ac] driver_unregister+0x4c/0xa0 [c000000288d1bd20] [c0000000000d6e7c] vio_unregister_driver+0x2c/0x50 [c000000288d1bd50] [d00000000290ba0c] cleanup_module+0x24/0x15e0 [ibmvfc] [c000000288d1bd70] [c0000000001dadb0] sys_delete_module+0x220/0x2d0 [c000000288d1be30] [c00000000000b284] system_call+0x58/0x6c Instruction dump: e8410018 e87f0068 809f0078 e8bf0080 e8df0088 2fa30000 419e008c e9230200 2fa90000 419e0080 894d098a 794a07e0 <0b0a0000> e9290008 2fa90000 419e0028 This is tripped as a result of irqs being disabled during the call to dma_free_coherent() by ibmvfc_free_event_pool(). At this point in the code path we have quiesced the adapter and its overly paranoid anyways to be holding the host lock. Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-23scsi: fcoe: fix a typoChristophe JAILLET
#define relative to FCOE CTLR start with FCOE_CTLR, except FCOE_CTRL_SOL_TOV. This is likely a typo and CTRL should be CTLR here as well. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-23scsi: megaraid_sas: Make some functions staticYueHaibing
Fix sparse warnings: drivers/scsi/megaraid/megaraid_sas_fusion.c:541:1: warning: symbol 'megasas_alloc_cmdlist_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:580:1: warning: symbol 'megasas_alloc_request_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:661:1: warning: symbol 'megasas_alloc_reply_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:738:1: warning: symbol 'megasas_alloc_rdpq_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:920:1: warning: symbol 'megasas_alloc_cmds_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:1740:1: warning: symbol 'megasas_init_adapter_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:1966:1: warning: symbol 'map_cmd_status' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:2379:1: warning: symbol 'megasas_set_pd_lba' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:2718:1: warning: symbol 'megasas_build_ldio_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:3215:1: warning: symbol 'megasas_build_io_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:3328:6: warning: symbol 'megasas_prepare_secondRaid1_IO' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-23scsi: megaraid_sas: fix panic on loading firmware crashdumpJunxiao Bi
While loading fw crashdump in function fw_crash_buffer_show(), left bytes in one dma chunk was not checked, if copying size over it, overflow access will cause kernel panic. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-23scsi: megaraid_sas: fix spelling mistake "megarid_sas" -> "megaraid_sas"Colin Ian King
Fix spelling mistake in kernel warning message and replace printk with with pr_warn. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-23net: thunderx: Use fwnode_get_mac_address()Andy Shevchenko
Replace the custom implementation with fwnode_get_mac_address, which works on both DT and ACPI platforms. While here, replace memcpy() by ether_addr_copy(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23sky2: Disable MSI on ASUS P6TTakashi Iwai
The onboard sky2 NIC on ASUS P6T WS PRO doesn't work after PM resume due to the infamous IRQ problem. Disabling MSI works around it, so let's add it to the blacklist. Unfortunately the BIOS on the machine doesn't fill the standard DMI_SYS_* entry, so we pick up DMI_BOARD_* entries instead. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1142496 Reported-and-tested-by: Marcus Seyfarth <m.seyfarth@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23net: dsa: sja1105: sja1105_main: Add of_node_put()Nishka Dasgupta
Each iteration of for_each_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23net: dsa: mv88e6xxx: chip: Add of_node_put() before returnNishka Dasgupta
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-23drm/amd/display: Set enabled to false at start of audio disableNicholas Kazlauskas
[Why] In an effort to stop redundant calls to dce110_disable_audio_stream the audio->enabled flag was added to the audio resource struct. While this state probably shouldn't have been tracked on the audio struct itself it still works fine for some sequences. However, it does not work for cases where we're freeing the audio resource (such as hotplugs) or when dynamic audio is enabled. In these cases the pipe_ctx->stream_res.audio = NULL before we can set audio->enabled = false. The next time we acquire the audio resource such as on hotplug the audio will not be enabled for the stream since DC thinks it's still enabled. Audio state tracking should cover this sequence. [How] Set audio->enabled = false at the start as long as we have pipe_ctx->stream_res.audio. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-23Revert "nvme-pci: don't create a read hctx mapping without read queues"yangerkun
This reverts commit 0298d5435276e7795b0b939d74827f6e775e7009. With this patch, set 'poll_queues > hard queues' will lead to 'nr_read_queues = 0' in nvme_calc_irq_sets. Then poll_queues setting can fail since dev->tagset.nr_maps equals to 2 and nvme_pci_map_queues will not do map for poll queues. Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23nvme: fix multipath crash when ANA is deactivatedMarta Rybczynska
Fix a crash with multipath activated. It happends when ANA log page is larger than MDTS and because of that ANA is disabled. The driver then tries to access unallocated buffer when connecting to a nvme target. The signature is as follows: [ 300.433586] nvme nvme0: ANA log page size (8208) larger than MDTS (8192). [ 300.435387] nvme nvme0: disabling ANA support. [ 300.437835] nvme nvme0: creating 4 I/O queues. [ 300.459132] nvme nvme0: new ctrl: NQN "nqn.0.0.0", addr 10.91.0.1:8009 [ 300.464609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 300.466342] #PF error: [normal kernel read fault] [ 300.467385] PGD 0 P4D 0 [ 300.467987] Oops: 0000 [#1] SMP PTI [ 300.468787] CPU: 3 PID: 50 Comm: kworker/u8:1 Not tainted 5.0.20kalray+ #4 [ 300.470264] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 300.471532] Workqueue: nvme-wq nvme_scan_work [nvme_core] [ 300.472724] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core] [ 300.474038] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48 [ 300.477374] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296 [ 300.478334] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000 [ 300.479784] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258 [ 300.481488] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 [ 300.483203] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0 [ 300.484928] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0 [ 300.486626] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000 [ 300.488538] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.489907] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0 [ 300.491612] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 300.493303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 300.494991] Call Trace: [ 300.495645] nvme_mpath_add_disk+0x5c/0xb0 [nvme_core] [ 300.496880] nvme_validate_ns+0x2ef/0x550 [nvme_core] [ 300.498105] ? nvme_identify_ctrl.isra.45+0x6a/0xb0 [nvme_core] [ 300.499539] nvme_scan_work+0x2b4/0x370 [nvme_core] [ 300.500717] ? __switch_to_asm+0x35/0x70 [ 300.501663] process_one_work+0x171/0x380 [ 300.502340] worker_thread+0x49/0x3f0 [ 300.503079] kthread+0xf8/0x130 [ 300.503795] ? max_active_store+0x80/0x80 [ 300.504690] ? kthread_bind+0x10/0x10 [ 300.505502] ret_from_fork+0x35/0x40 [ 300.506280] Modules linked in: nvme_tcp nvme_rdma rdma_cm iw_cm ib_cm ib_core nvme_fabrics nvme_core xt_physdev ip6table_raw ip6table_mangle ip6table_filter ip6_tables xt_comment iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_CHECKSUM iptable_mangle iptable_filter veth ebtable_filter ebtable_nat ebtables iptable_raw vxlan ip6_udp_tunnel udp_tunnel sunrpc joydev pcspkr virtio_balloon br_netfilter bridge stp llc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net virtio_console net_failover virtio_blk failover ata_piix serio_raw libata virtio_pci virtio_ring virtio [ 300.514984] CR2: 0000000000000008 [ 300.515569] ---[ end trace faa2eefad7e7f218 ]--- [ 300.516354] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core] [ 300.517330] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48 [ 300.520353] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296 [ 300.521229] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000 [ 300.522399] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258 [ 300.523560] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 [ 300.524734] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0 [ 300.525915] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0 [ 300.527084] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000 [ 300.528396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.529440] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0 [ 300.530739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 300.531989] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 300.533264] Kernel panic - not syncing: Fatal exception [ 300.534338] Kernel Offset: 0x17c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 300.536227] ---[ end Kernel panic - not syncing: Fatal exception ]--- Condition check refactoring from Christoph Hellwig. Signed-off-by: Marta Rybczynska <marta.rybczynska@kalray.eu> Tested-by: Jean-Baptiste Riaux <jbriaux@kalray.eu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23nvme: fix memory leak caused by incorrect subsystem freeLogan Gunthorpe
When freeing the subsystem after finding another match with __nvme_find_get_subsystem(), use put_device() instead of __nvme_release_subsystem() which calls kfree() directly. Per the documentation, put_device() should always be used after device_initialization() is called. Otherwise, leaks like the one below which was detected by kmemleak may occur. Once the call of __nvme_release_subsystem() is removed it no longer makes sense to keep the helper, so fold it back into nvme_release_subsystem(). unreferenced object 0xffff8883d12bfbc0 (size 16): comm "nvme", pid 2635, jiffies 4294933602 (age 739.952s) hex dump (first 16 bytes): 6e 76 6d 65 2d 73 75 62 73 79 73 32 00 88 ff ff nvme-subsys2.... backtrace: [<000000007d8fc208>] __kmalloc_track_caller+0x16d/0x2a0 [<0000000081169e5f>] kvasprintf+0xad/0x130 [<0000000025626f25>] kvasprintf_const+0x47/0x120 [<00000000fa66ad36>] kobject_set_name_vargs+0x44/0x120 [<000000004881f8b3>] dev_set_name+0x98/0xc0 [<000000007124dae3>] nvme_init_identify+0x1995/0x38e0 [<000000009315020a>] nvme_loop_configure_admin_queue+0x4fa/0x5e0 [<000000001a63e766>] nvme_loop_create_ctrl+0x489/0xf80 [<00000000a46ecc23>] nvmf_dev_write+0x1a12/0x2220 [<000000002259b3d5>] __vfs_write+0x66/0x120 [<000000002f6df81e>] vfs_write+0x154/0x490 [<000000007e8cfc19>] ksys_write+0x10a/0x240 [<00000000ff5c7b85>] __x64_sys_write+0x73/0xb0 [<00000000fee6d692>] do_syscall_64+0xaa/0x470 [<00000000997e1ede>] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: ab9e00cc72fa ("nvme: track subsystems") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23nvme: ignore subnqn for ADATA SX6000LNPMisha Nasledov
The ADATA SX6000LNP NVMe SSDs have the same subnqn and, due to this, a system with more than one of these SSDs will only have one usable. [ 0.942706] nvme nvme1: ignoring ctrl due to duplicate subnqn (nqn.2018-05.com.example:nvme:nvm-subsystem-OUI00E04C). [ 0.943017] nvme nvme1: Removing after probe failure status: -22 02:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01) 71:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01) There are no firmware updates available from the vendor, unfortunately. Applying the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk for these SSDs resolves the issue, and they all work after this patch: /dev/nvme0n1 2J1120050420 ADATA SX6000LNP [...] /dev/nvme1n1 2J1120050540 ADATA SX6000LNP [...] Signed-off-by: Misha Nasledov <misha@nasledov.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23iommu/amd: Add support for X2APIC IOMMU interruptsSuthikulpanit, Suravee
AMD IOMMU requires IntCapXT registers to be setup in order to generate its own interrupts (for Event Log, PPR Log, and GA Log) with 32-bit APIC destination ID. Without this support, AMD IOMMU MSI interrupts will not be routed correctly when booting the system in X2APIC mode. Cc: Joerg Roedel <joro@8bytes.org> Fixes: 90fcffd9cf5e ('iommu/amd: Add support for IOMMU XT mode') Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-23ACPI/IORT: Fix off-by-one check in iort_dev_find_its_id()Lorenzo Pieralisi
Static analysis identified that index comparison against ITS entries in iort_dev_find_its_id() is off by one. Update the comparison condition and clarify the resulting error message. Fixes: 4bf2efd26d76 ("ACPI: Add new IORT functions to support MSI domain handling") Link: https://lore.kernel.org/linux-arm-kernel/20190613065410.GB16334@mwanda/ Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-07-23Input: elantech - enable SMBus on new (2018+) systemsKai-Heng Feng
There are some new HP laptops with Elantech touchpad that don't support multitouch. Currently we use ETP_NEW_IC_SMBUS_HOST_NOTIFY() to check if SMBus is supported, but in addition to firmware version, the bus type also informs us whether the IC can support SMBus. To avoid breaking old ICs, we will only enable SMbus support based the bus type on systems manufactured after 2018. Lastly, let's consolidate all checks into elantech_use_host_notify() and use it to determine whether to use PS/2 or SMBus. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-23Input: applespi - fix trivial typo in struct descriptionNikolas Nyby
This fixes a typo in the keyboard_protocol description. coodinate -> coordinate. Signed-off-by: Nikolas Nyby <nikolas@gnu.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-23Input: applespi - select CRC16 moduleArnd Bergmann
In some rare randconfig builds, CRC16 is disabled, which leads to a link error: drivers/input/keyboard/applespi.o: In function `applespi_send_cmd_msg': applespi.c:(.text+0x449f): undefined reference to `crc16' drivers/input/keyboard/applespi.o: In function `applespi_verify_crc': applespi.c:(.text+0x7538): undefined reference to `crc16' This symbol is meant to be selected for each user in Kconfig, so do that here as well. Fixes: 038b1a05eae6 ("Input: add Apple SPI keyboard and trackpad driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-23drbd: dynamically allocate shash descriptorArnd Bergmann
Building with clang and KASAN, we get a warning about an overly large stack frame on 32-bit architectures: drivers/block/drbd/drbd_receiver.c:921:31: error: stack frame size of 1280 bytes in function 'conn_connect' [-Werror,-Wframe-larger-than=] We already allocate other data dynamically in this function, so just do the same for the shash descriptor, which makes up most of this memory. Link: https://lore.kernel.org/lkml/20190617132440.2721536-1-arnd@arndb.de/ Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Roland Kammerer <roland.kammerer@linbit.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-23Merge tag 'vfio-ccw-20190717-2' of ↵Heiko Carstens
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into fixes Fixes in vfio-ccw for older and newer issues.
2019-07-23s390/qdio: restrict QAOB usage to IQD unicast queuesJulian Wiedmann
The IQD mcast queue doesn't support QAOB mode, so skip the qdio_enable_async_operation() setup call for this queue. This avoids the allocation of an unneeded QAOB pointer array, and sets up q->use_cq properly so that drivers are prohibited from using QAOBs for mcast traffic. Take this opportunity to streamline the q->use_cq and aob != 0 checks. The path to qdio_siga_output() is straight-forward, we don't need to worry about being called with bad operands. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-07-23s390/qdio: add sanity checks to the fast-requeue pathJulian Wiedmann
If the device driver were to send out a full queue's worth of SBALs, current code would end up discovering the last of those SBALs as PRIMED and erroneously skip the SIGA-w. This immediately stalls the queue. Add a check to not attempt fast-requeue in this case. While at it also make sure that the state of the previous SBAL was successfully extracted before inspecting it. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-07-23firmware: Fix missing inlineTakashi Iwai
I mistakenly dropped the inline while resolving the patch conflicts in the previous fix patch. Without inline, we get compiler warnings wrt unused functions. Note that Mauro's original patch contained the correct changes; it's all my fault to submit a patch before a morning coffee. Fixes: c8917b8ff09e ("firmware: fix build errors in paged buffer handling code") Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20190723081159.22624-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-23cpufreq/pasemi: fix use-after-free in pas_cpufreq_cpu_init()Wen Yang
The cpu variable is still being used in the of_get_property() call after the of_node_put() call, which may result in use-after-free. Fixes: a9acc26b75f6 ("cpufreq/pasemi: fix possible object reference leak") Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-23int340X/processor_thermal_device: Fix proc_thermal_rapl_remove()Rafael J. Wysocki
Passing 0 to cpuhp_remove_state() triggers the BUG_ON() in __cpuhp_remove_state_cpuslocked() and the argument passed to powercap_unregister_control_type() is expected to be a valid pointer, so avoid calling these functions with incorrect arguments from proc_thermal_rapl_remove(). Fixes: 555c45fe0d04 ("int340X/processor_thermal_device: add support for MMIO RAPL") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com>
2019-07-22Revert "net: hns: fix LED configuration for marvell phy"David S. Miller
This reverts commit f4e5f775db5a4631300dccd0de5eafb50a77c131. Andrew Lunn says this should be handled another way. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22scsi: core: fix the dma_max_mapping_size callChristoph Hellwig
We should only call dma_max_mapping_size for devices that have a DMA mask set, otherwise we can run into a NULL pointer dereference that will crash the system. Also we need to do right shift to get the sectors from the size in bytes, not a left shift. Fixes: bdd17bdef7d8 ("scsi: core: take the DMA max mapping size into account") Reported-by: Bart Van Assche <bvanassche@acm.org> Reported-by: Ming Lei <tom.leiming@gmail.com> Tested-by: Guilherme G. Piccoli <gpiccoli@canonical.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-22scsi: fdomain: fix building pcmcia front-endArnd Bergmann
We get a warning when CONFIG_SCSI_LOWLEVEL is disabled here: WARNING: unmet direct dependencies detected for SCSI_FDOMAIN Depends on [n]: SCSI_LOWLEVEL [=n] && SCSI [=y] Selected by [m]: - PCMCIA_FDOMAIN [=m] && SCSI_LOWLEVEL_PCMCIA [=y] && SCSI [=y] && PCMCIA [=y] && m && MODULES [=y] Move all of SCSI_LOWLEVEL_PCMCIA inside of the existing SCSI_LOWLEVEL section. Very few people use the PCMCIA support these days, and they likely don't mind having to turn on SCSI_LOWLEVEL as well. This way we avoid the link error and get a more sensible structure. Fixes: 7d47fa065e62 ("scsi: fdomain: Add PCMCIA support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-22net: stmmac: Do not cut down 1G modesJose Abreu
Some glue logic drivers support 1G without having GMAC/GMAC4/XGMAC. Let's allow this speed by default. Reported-by: Ondrej Jirman <megi@xff.cz> Tested-by: Ondrej Jirman <megi@xff.cz> Fixes: 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC supports") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 15:15:02 +0000