summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-08-13interconnect: Add pre_aggregate() callbackGeorgi Djakov
Introduce an optional callback in interconnect provider drivers. It can be used for implementing actions, that need to be executed before the actual aggregation of the bandwidth requests has started. The benefit of this for now is that it will significantly simplify the code in provider drivers. Suggested-by: Evan Green <evgreen@chromium.org> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-08-13interconnect: Add support for path tagsGeorgi Djakov
Consumers may have use cases with different bandwidth requirements based on the system or driver state. The consumer driver can append a specific tag to the path and pass this information to the interconnect platform driver to do the aggregation based on this state. Introduce icc_set_tag() function that will allow the consumers to append an optional tag to each path. The aggregation of these tagged paths is platform specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-08-13Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "Single lpfc fix, for a single-cpu corner case" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: Fix crash when cpu count is 1 and null irq affinity mask
2019-08-13RDMA/siw: Change CQ flags from 64->32 bitsBernard Metzler
This patch changes the driver/user shared (mmapped) CQ notification flags field from unsigned 64-bits size to unsigned 32-bits size. This enables building siw on 32-bit architectures. This patch changes the siw-abi, but as siw was only just merged in this merge window cycle, there are no released kernels with the prior abi. We are making no attempt to be binary compatible with siw user space libraries prior to the merge of siw into the upstream kernel, only moving forward with upstream kernels and upstream rdma-core provided siw libraries are we guaranteeing compatibility. Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Link: https://lore.kernel.org/r/20190809151816.13018-1-bmt@zurich.ibm.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-13HID: logitech-hidpp: remove support for the G700 over USBBenjamin Tissoires
The G700 suffers from the same issue than the G502: when plugging it in, the driver tries to contact it but it fails. This timeout is problematic as it introduce a delay in the boot, and having only the mouse event node means that the hardware macros keys can not be relayed to the userspace. Link: https://github.com/libratbag/libratbag/issues/797 Fixes: 91cf9a98ae41 ("HID: logitech-hidpp: make .probe usbhid capable") Cc: stable@vger.kernel.org # v5.2 Reviewed-by: Filipe Laíns <lains@archlinux.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-08-13Revert "HID: logitech-hidpp: add USB PID for a few more supported mice"Benjamin Tissoires
This partially reverts commit 27fc32fd9417968a459d43d9a7c50fd423d53eb9. It turns out that the G502 has some issues with hid-logitech-hidpp: when plugging it in, the driver tries to contact it but it fails. So the driver bails out leaving only the mouse event node available. This timeout is problematic as it introduce a delay in the boot, and having only the mouse event node means that the hardware macros keys can not be relayed to the userspace. Filipe and I just gave a shot at the following devices: G403 Wireless (0xC082) G703 (0xC087) G703 Hero (0xC090) G903 (0xC086) G903 Hero (0xC091) G Pro (0xC088) Reverting the devices we are not sure that works flawlessly. Reviewed-by: Filipe Laíns <lains@archlinux.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-08-13Merge tag 'gvt-fixes-2019-08-13' of https://github.com/intel/gvt-linux into ↵Jani Nikula
drm-intel-fixes gvt-fixes-2019-08-13 - Fix one use-after-free error (Dan) Signed-off-by: Jani Nikula <jani.nikula@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190813095845.GF19140@zhen-hp.sh.intel.com
2019-08-13mtd: spi-nor: Fix the disabling of write protection at initTudor Ambarus
spi_nor_spansion_clear_sr_bp() depends on spansion_quad_enable(). While spansion_quad_enable() is selected as default when initializing the flash parameters, the nor->quad_enable() method can be overwritten later on when parsing BFPT. Select the write protection disable mechanism at spi_nor_init() time, when the nor->quad_enable() method is already known. Fixes: 191f5c2ed4b6faba ("mtd: spi-nor: use 16-bit WRR command when QE is set on spansion flashes") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-08-13soc: ti: pm33xx: Make two symbols staticYueHaibing
Fix sparse warnings: drivers/soc/ti/pm33xx.c:144:27: warning: symbol 'rtc_wake_src' was not declared. Should it be static? drivers/soc/ti/pm33xx.c:160:5: warning: symbol 'am33xx_rtc_only_idle' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13soc: ti: pm33xx: Fix static checker warningsKeerthy
The patch fixes a bunch of static checker warnings. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13bus: ti-sysc: Simplify cleanup upon failures in sysc_probe()Suman Anna
The clocks are not yet parsed and prepared until after a successful sysc_get_clocks(), so there is no need to unprepare the clocks upon any failure of any of the prior functions in sysc_probe(). The current code path would have been a no-op because of the clock validity checks within sysc_unprepare(), but let's just simplify the cleanup path by returning the error directly. While at this, also fix the cleanup path for a sysc_init_resets() failure which is executed after the clocks are prepared. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13HID: wacom: add back changes dropped in merge commitAaron Armstrong Skomra
Merge commit 74acee309fb2 ("Merge branches 'for-5.2/fixes', 'for-5.3/doc', 'for-5.3/ish', 'for-5.3/logitech' and 'for-5.3/wacom' into for-linus") inadvertently dropped this change from commit 912c6aa67ad4 ("HID: wacom: Add 2nd gen Intuos Pro Small support"). Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-08-13bus: hisi_lpc: Add .remove method to avoid driver unbind crashJohn Garry
The original driver author seemed to be under the impression that a driver cannot be removed if it does not have a .remove method. Or maybe if it is a built-in platform driver. This is not true. This crash can be created: root@ubuntu:/sys/bus/platform/drivers/hisi-lpc# echo HISI0191\:00 > unbind root@ubuntu:/sys/bus/platform/drivers/hisi-lpc# ipmitool raw 6 1 Unable to handle kernel paging request at virtual address ffff000010035010 Mem abort info: ESR = 0x96000047 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000047 CM = 0, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000000118b000 [ffff000010035010] pgd=0000041ffbfff003, pud=0000041ffbffe003, pmd=0000041ffbffd003, pte=0000000000000000 Internal error: Oops: 96000047 [#1] PREEMPT SMP Modules linked in: CPU: 17 PID: 1473 Comm: ipmitool Not tainted 5.2.0-rc5-00003-gf68c53b414a3-dirty #198 Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018 pstate: 20000085 (nzCv daIf -PAN -UAO) pc : hisi_lpc_target_in+0x7c/0x120 lr : hisi_lpc_target_in+0x70/0x120 sp : ffff00001efe3930 x29: ffff00001efe3930 x28: ffff841f9f599200 x27: 0000000000000002 x26: 0000000000000000 x25: 0000000000000080 x24: 00000000000000e4 x23: 0000000000000000 x22: 0000000000000064 x21: ffff801fb667d280 x20: 0000000000000001 x19: ffff00001efe39ac x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff841febe60340 x7 : ffff801fb55c52e8 x6 : 0000000000000000 x5 : 0000000000ffc0e3 x4 : 0000000000000001 x3 : ffff801fb667d280 x2 : 0000000000000001 x1 : ffff000010035010 x0 : ffff000010035000 Call trace: hisi_lpc_target_in+0x7c/0x120 hisi_lpc_comm_in+0x88/0x98 logic_inb+0x5c/0xb8 port_inb+0x18/0x20 bt_event+0x38/0x808 smi_event_handler+0x4c/0x5a0 check_start_timer_thread.part.4+0x40/0x58 sender+0x78/0x88 smi_send.isra.6+0x94/0x108 i_ipmi_request+0x2c4/0x8f8 ipmi_request_settime+0x124/0x160 handle_send_req+0x19c/0x208 ipmi_ioctl+0x2c0/0x990 do_vfs_ioctl+0xb8/0x8f8 ksys_ioctl+0x80/0xb8 __arm64_sys_ioctl+0x1c/0x28 el0_svc_common.constprop.0+0x64/0x160 el0_svc_handler+0x28/0x78 el0_svc+0x8/0xc Code: 941d1511 aa0003f9 f94006a0 91004001 (b9000034) ---[ end trace aa842b86af7069e4 ]--- The problem here is that the host goes away but the associated logical PIO region remains registered, as do the children devices. Fix by adding a .remove method to tidy-up by removing the child devices and unregistering the logical PIO region. Cc: stable@vger.kernel.org Fixes: adf38bb0b595 ("HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings") Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-08-13bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-freeJohn Garry
If, after registering a logical PIO range, the driver probe later fails, the logical PIO range memory will be released automatically. This causes an issue, in that the logical PIO range is not unregistered and the released range memory may be later referenced. Fix by unregistering the logical PIO range. And since we now unregister the logical PIO range for probe failure, avoid the special ordering of setting logical PIO range ops, which was the previous (poor) attempt at a safeguard against this. Cc: stable@vger.kernel.org Fixes: adf38bb0b595 ("HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings") Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-08-12drm/amd/display: use kvmalloc for dc_state (v2)Alex Deucher
It's large and doesn't need contiguous memory. Fixes allocation failures in some cases. v2: kvfree the memory. Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-12drm/amdgpu: fix gfx9 soft recoveryPierre-Eric Pelloux-Prayer
The SOC15_REG_OFFSET() macro wasn't used, making the soft recovery fail. v2: use WREG32_SOC15 instead of WREG32 + SOC15_REG_OFFSET Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-08-12of: resolver: Add of_node_put() before return and breakNishka Dasgupta
Each iteration of for_each_child_of_node puts the previous node, but in the case of a return or break from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return or break in three places. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-08-12lkdtm: Add Control Flow Integrity testKees Cook
This adds a simple test for forward CFI (indirect function calls) with function prototype granularity (as implemented by Clang's CFI). Signed-off-by: Kees Cook <keescook@chromium.org>
2019-08-12net: phy: at803x: stop switching phy delay config needlesslyAndré Draszik
This driver does a funny dance disabling and re-enabling RX and/or TX delays. In any of the RGMII-ID modes, it first disables the delays, just to re-enable them again right away. This looks like a needless exercise. Just enable the respective delays when in any of the relevant 'id' modes, and disable them otherwise. Also, remove comments which don't add anything that can't be seen by looking at the code. Signed-off-by: André Draszik <git@andred.net> CC: Andrew Lunn <andrew@lunn.ch> CC: Florian Fainelli <f.fainelli@gmail.com> CC: Heiner Kallweit <hkallweit1@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-12Merge tag 'iio-fixes-for-5.3b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Second set of IIO fix for the 5.3 cycle. * adf4371 - Calculation of the value to program to control the output frequency was incorrect. * max9611 - Fix temperature reading in probe. A recent fix for a wrong mask meant this code was looked at afresh. A second bug became obvious in which the return value was used inplace of the desired register value. This had no visible effect other than a communication test not actually testing the communications. * tag 'iio-fixes-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: adc: max9611: Fix temperature reading in probe iio: frequency: adf4371: Fix output frequency setting
2019-08-12USB: core: Fix races in character device registration and deregistraionAlan Stern
The syzbot fuzzer has found two (!) races in the USB character device registration and deregistration routines. This patch fixes the races. The first race results from the fact that usb_deregister_dev() sets usb_minors[intf->minor] to NULL before calling device_destroy() on the class device. This leaves a window during which another thread can allocate the same minor number but will encounter a duplicate name error when it tries to register its own class device. A typical error message in the system log would look like: sysfs: cannot create duplicate filename '/class/usbmisc/ldusb0' The patch fixes this race by destroying the class device first. The second race is in usb_register_dev(). When that routine runs, it first allocates a minor number, then drops minor_rwsem, and then creates the class device. If the device creation fails, the minor number is deallocated and the whole routine returns an error. But during the time while minor_rwsem was dropped, there is a window in which the minor number is allocated and so another thread can successfully open the device file. Typically this results in use-after-free errors or invalid accesses when the other thread closes its open file reference, because the kernel then tries to release resources that were already deallocated when usb_register_dev() failed. The patch fixes this race by keeping minor_rwsem locked throughout the entire routine. Reported-and-tested-by: syzbot+30cf45ebfe0b0c4847a1@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1908121607590.1659-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-12Bluetooth: btqca: Reset download type to defaultBalakrishna Godavarthi
This patch will reset the download flag to default value before retrieving the download mode type. Fixes: 32646db8cc28 ("Bluetooth: btqca: inject command complete event during fw download") Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Tested-by: Claire Chang <tientzu@chromium.org> Reviewed-by: Claire Chang <tientzu@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-08-12Bluetooth: btqca: release_firmware after qca_inject_cmd_complete_eventClaire Chang
commit 32646db8cc28 ("Bluetooth: btqca: inject command complete event during fw download") added qca_inject_cmd_complete_event() for certain qualcomm chips. However, qca_download_firmware() will return without calling release_firmware() in this case. This leads to a memory leak like the following found by kmemleak: unreferenced object 0xfffffff3868a5880 (size 128): comm "kworker/u17:5", pid 347, jiffies 4294676481 (age 312.157s) hex dump (first 32 bytes): ac fd 00 00 00 00 00 00 00 d0 7e 17 80 ff ff ff ..........~..... 00 00 00 00 00 00 00 00 00 59 8a 86 f3 ff ff ff .........Y...... backtrace: [<00000000978ce31d>] kmem_cache_alloc_trace+0x194/0x298 [<000000006ea0398c>] _request_firmware+0x74/0x4e4 [<000000004da31ca0>] request_firmware+0x44/0x64 [<0000000094572996>] qca_download_firmware+0x74/0x6e4 [btqca] [<00000000b24d615a>] qca_uart_setup+0xc0/0x2b0 [btqca] [<00000000364a6d5a>] qca_setup+0x204/0x570 [hci_uart] [<000000006be1a544>] hci_uart_setup+0xa8/0x148 [hci_uart] [<00000000d64c0f4f>] hci_dev_do_open+0x144/0x530 [bluetooth] [<00000000f69f5110>] hci_power_on+0x84/0x288 [bluetooth] [<00000000d4151583>] process_one_work+0x210/0x420 [<000000003cf3dcfb>] worker_thread+0x2c4/0x3e4 [<000000007ccaf055>] kthread+0x124/0x134 [<00000000bef1f723>] ret_from_fork+0x10/0x18 [<00000000c36ee3dd>] 0xffffffffffffffff unreferenced object 0xfffffff37b16de00 (size 128): comm "kworker/u17:5", pid 347, jiffies 4294676873 (age 311.766s) hex dump (first 32 bytes): da 07 00 00 00 00 00 00 00 50 ff 0b 80 ff ff ff .........P...... 00 00 00 00 00 00 00 00 00 dd 16 7b f3 ff ff ff ...........{.... backtrace: [<00000000978ce31d>] kmem_cache_alloc_trace+0x194/0x298 [<000000006ea0398c>] _request_firmware+0x74/0x4e4 [<000000004da31ca0>] request_firmware+0x44/0x64 [<0000000094572996>] qca_download_firmware+0x74/0x6e4 [btqca] [<000000000cde20a9>] qca_uart_setup+0x144/0x2b0 [btqca] [<00000000364a6d5a>] qca_setup+0x204/0x570 [hci_uart] [<000000006be1a544>] hci_uart_setup+0xa8/0x148 [hci_uart] [<00000000d64c0f4f>] hci_dev_do_open+0x144/0x530 [bluetooth] [<00000000f69f5110>] hci_power_on+0x84/0x288 [bluetooth] [<00000000d4151583>] process_one_work+0x210/0x420 [<000000003cf3dcfb>] worker_thread+0x2c4/0x3e4 [<000000007ccaf055>] kthread+0x124/0x134 [<00000000bef1f723>] ret_from_fork+0x10/0x18 [<00000000c36ee3dd>] 0xffffffffffffffff Make sure release_firmware() is called aftre qca_inject_cmd_complete_event() to avoid the memory leak. Fixes: 32646db8cc28 ("Bluetooth: btqca: inject command complete event during fw download") Signed-off-by: Claire Chang <tientzu@chromium.org> Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-08-12Bluetooth: hci_qca: Send VS pre shutdown command.Harish Bandi
WCN399x chips are coex chips, it needs a VS pre shutdown command while turning off the BT. So that chip can inform BT is OFF to other active clients. Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-08-12Bluetooth: btqca: Use correct byte format for opcode of injected commandMatthias Kaehlcke
The opcode of the command injected by commit 32646db8cc28 ("Bluetooth: btqca: inject command complete event during fw download") uses the CPU byte format, however it should always be little endian. In practice it shouldn't really matter, since all we need is an opcode != 0, but still let's do things correctly and keep sparse happy. Fixes: 32646db8cc28 ("Bluetooth: btqca: inject command complete event during fw download") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-08-12Bluetooth: hci_qca: Use kfree_skb() instead of kfree()Wei Yongjun
Use kfree_skb() instead of kfree() to free sk_buff. Fixes: 2faa3f15fa2f ("Bluetooth: hci_qca: wcn3990: Drop baudrate change vendor event") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-08-12Bluetooth: btqca: Add a short delay before downloading the NVMMatthias Kaehlcke
On WCN3990 downloading the NVM sometimes fails with a "TLV response size mismatch" error: [ 174.949955] Bluetooth: btqca.c:qca_download_firmware() hci0: QCA Downloading qca/crnv21.bin [ 174.958718] Bluetooth: btqca.c:qca_tlv_send_segment() hci0: QCA TLV response size mismatch It seems the controller needs a short time after downloading the firmware before it is ready for the NVM. A delay as short as 1 ms seems sufficient, make it 10 ms just in case. No event is received during the delay, hence we don't just silently drop an extra event. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-08-12Bluetooth: btusb: Fix error return code in btusb_mtk_setup_firmware()Wei Yongjun
Fix to return error code -EINVAL from the error handling case instead of 0, as done elsewhere in this function. Fixes: a1c49c434e15 ("Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-08-12RDMA/core: Fix error code in stat_get_doit_qp()Dan Carpenter
We need to set the error codes on these paths. Currently the only possible error code is -EMSGSIZE so that's what the patch uses. Fixes: 83c2c1fcbd08 ("RDMA/nldev: Allow get counter mode through RDMA netlink") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190809101311.GA17867@mwanda Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-12RDMA/siw: Fix a memory leak in siw_init_cpulist()Dan Carpenter
The error handling code doesn't free siw_cpu_info.tx_valid_cpus[0]. The first iteration through the loop is a no-op so this is sort of an off by one bug. Also Bernard pointed out that we can remove the NULL assignment and simplify the code a bit. Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Link: https://lore.kernel.org/r/20190809140904.GB3552@mwanda Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-12IB/mlx5: Fix use-after-free error while accessing ev_file pointerYishai Hadas
Call to uverbs_close_fd() releases file pointer to 'ev_file' and mlx5_ib_dev is going to be inaccessible. Cache pointer prior cleaning resources to solve the KASAN warning below. BUG: KASAN: use-after-free in devx_async_event_close+0x391/0x480 [mlx5_ib] Read of size 8 at addr ffff888301e3cec0 by task devx_direct_tes/4631 CPU: 1 PID: 4631 Comm: devx_direct_tes Tainted: G OE 5.3.0-rc1-for-upstream-dbg-2019-07-26_01-19-56-93 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 Call Trace: dump_stack+0x9a/0xeb print_address_description+0x1e2/0x400 ? devx_async_event_close+0x391/0x480 [mlx5_ib] __kasan_report+0x15c/0x1df ? devx_async_event_close+0x391/0x480 [mlx5_ib] kasan_report+0xe/0x20 devx_async_event_close+0x391/0x480 [mlx5_ib] __fput+0x26a/0x7b0 task_work_run+0x10d/0x180 exit_to_usermode_loop+0x137/0x160 do_syscall_64+0x3c7/0x490 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f5df907d664 Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00 00 8b 05 6a cd 20 00 48 63 ff 85 c0 75 13 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 44 f3 c3 66 90 48 83 ec 18 48 89 7c 24 08 e8 RSP: 002b:00007ffd353cb958 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 000056017a88c348 RCX: 00007f5df907d664 RDX: 00007f5df969d400 RSI: 00007f5de8f1ec90 RDI: 0000000000000006 RBP: 00007f5df9681dc0 R08: 00007f5de8736410 R09: 000056017a9d2dd0 R10: 000000000000000b R11: 0000000000000246 R12: 00007f5de899d7d0 R13: 00007f5df96c4248 R14: 00007f5de8f1ecb0 R15: 000056017ae41308 Allocated by task 4631: save_stack+0x19/0x80 kasan_kmalloc.constprop.3+0xa0/0xd0 alloc_uobj+0x71/0x230 [ib_uverbs] alloc_begin_fd_uobject+0x2e/0xc0 [ib_uverbs] rdma_alloc_begin_uobject+0x96/0x140 [ib_uverbs] ib_uverbs_run_method+0xdf0/0x1940 [ib_uverbs] ib_uverbs_cmd_verbs+0x57e/0xdb0 [ib_uverbs] ib_uverbs_ioctl+0x177/0x260 [ib_uverbs] do_vfs_ioctl+0x18f/0x1010 ksys_ioctl+0x70/0x80 __x64_sys_ioctl+0x6f/0xb0 do_syscall_64+0x95/0x490 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 4631: save_stack+0x19/0x80 __kasan_slab_free+0x11d/0x160 slab_free_freelist_hook+0x67/0x1a0 kfree+0xb9/0x2a0 uverbs_close_fd+0x118/0x1c0 [ib_uverbs] devx_async_event_close+0x28a/0x480 [mlx5_ib] __fput+0x26a/0x7b0 task_work_run+0x10d/0x180 exit_to_usermode_loop+0x137/0x160 do_syscall_64+0x3c7/0x490 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff888301e3cda8 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 280 bytes inside of 512-byte region [ffff888301e3cda8, ffff888301e3cfa8) The buggy address belongs to the page: page:ffffea000c078e00 refcount:1 mapcount:0 mapping:ffff888352811300 index:0x0 compound_mapcount: 0 flags: 0x2fffff80010200(slab|head) raw: 002fffff80010200 ffffea000d152608 ffffea000c077808 ffff888352811300 raw: 0000000000000000 0000000000250025 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888301e3cd80: fc fc fc fc fc fb fb fb fb fb fb fb fb fb fb fb ffff888301e3ce00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888301e3ce80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888301e3cf00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888301e3cf80: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc Disabling lock debugging due to kernel taint Cc: <stable@vger.kernel.org> # 5.2 Fixes: 759738537142 ("IB/mlx5: Enable subscription for device events over DEVX") Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Link: https://lore.kernel.org/r/20190808081538.28772-1-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-12staging: comedi: dt3000: Fix rounding up of timer divisorIan Abbott
`dt3k_ns_to_timer()` determines the prescaler and divisor to use to produce a desired timing period. It is influenced by a rounding mode and can round the divisor up, down, or to the nearest value. However, the code for rounding up currently does the same as rounding down! Fix ir by using the `DIV_ROUND_UP()` macro to calculate the divisor when rounding up. Also, change the types of the `divider`, `base` and `prescale` variables from `int` to `unsigned int` to avoid mixing signed and unsigned types in the calculations. Also fix a typo in a nearby comment: "improvment" => "improvement". Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190812120814.21188-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-12staging: comedi: dt3000: Fix signed integer overflow 'divider * base'Ian Abbott
In `dt3k_ns_to_timer()` the following lines near the end of the function result in a signed integer overflow: prescale = 15; base = timer_base * (1 << prescale); divider = 65535; *nanosec = divider * base; (`divider`, `base` and `prescale` are type `int`, `timer_base` and `*nanosec` are type `unsigned int`. The value of `timer_base` will be either 50 or 100.) The main reason for the overflow is that the calculation for `base` is completely wrong. It should be: base = timer_base * (prescale + 1); which matches an earlier instance of this calculation in the same function. Reported-by: David Binderman <dcb314@hotmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20190812111517.26803-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-12xen/blkback: fix memory leaksWenwen Wang
In read_per_ring_refs(), after 'req' and related memory regions are allocated, xen_blkif_map() is invoked to map the shared frame, irq, and etc. However, if this mapping process fails, no cleanup is performed, leading to memory leaks. To fix this issue, invoke the cleanup before returning the error. Acked-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-12drm/omap: ensure we have a valid dma_maskTomi Valkeinen
The omapdrm driver uses dma_set_coherent_mask(), but that's not enough anymore when LPAE is enabled. From Christoph Hellwig <hch@lst.de>: > The traditional arm DMA code ignores, but the generic dma-direct/swiotlb > has stricter checks and thus fails mappings without a DMA mask. As we > use swiotlb for arm with LPAE now, omapdrm needs to catch up and > actually set a DMA mask. Change the dma_set_coherent_mask() call to dma_coerce_mask_and_coherent() so that the dev->dma_mask is also set. Fixes: ad3c7b18c5b3 ("arm: use swiotlb for bounce buffering on LPAE configs") Reported-by: "H. Nikolaus Schaller" <hns@goldelico.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/c219e7e6-0f66-d6fd-e0cf-59c803386825@ti.com Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2019-08-12Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixesMaarten Lankhorst
Backport requested for omap dma mask fix. I'm not sure it still requires it, but just in case. :) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2019-08-12drm/komeda: Add support for 'memory-region' DT node propertyMihail Atanassov
The 'memory-region' property of the komeda display driver DT binding allows the use of a 'reserved-memory' node for buffer allocations. Add the requisite of_reserved_mem_device_{init,release} calls to actually make use of the memory if present. Changes since v1: - Move handling inside komeda_parse_dt Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190805095408.21285-1-mihail.atanassov@arm.com
2019-08-12drm/komeda: Adds internal bpp computing for arm afbc only format YU08 YU10Lowry Li (Arm Technology China)
The drm_format_info doesn't have any cpp or block_size (both are zero) information for arm only afbc format YU08/YU10. we need to compute it by ourselves. Changes since v1: 1. Removed redundant warning check in komeda_get_afbc_format_bpp(); 2. Removed a redundant empty line; 3. Rebased the branch. Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/1565073104-24047-1-git-send-email-lowry.li@arm.com Link: https://patchwork.freedesktop.org/patch/msgid/1565073104-24047-1-git-send-email-lowry.li@arm.com
2019-08-12efi-stub: Fix get_efi_config_table on mixed-mode setupsHans de Goede
Fix get_efi_config_table using the wrong structs when booting a 64 bit kernel on 32 bit firmware. Fixes: 82d736ac56d7 ("Abstract out support for locating an EFI config table") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-By: Matthew Garrett <mjg59@google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2019-08-12nvme-pci: Allow PCI bus-level PM to be used if ASPM is disabledRafael J. Wysocki
One of the modifications made by commit d916b1be94b6 ("nvme-pci: use host managed power state for suspend") was adding a pci_save_state() call to nvme_suspend() so as to instruct the PCI bus type to leave devices handled by the nvme driver in D0 during suspend-to-idle. That was done with the assumption that ASPM would transition the device's PCIe link into a low-power state when the device became inactive. However, if ASPM is disabled for the device, its PCIe link will stay in L0 and in that case commit d916b1be94b6 is likely to cause the energy used by the system while suspended to increase. Namely, if the device in question works in accordance with the PCIe specification, putting it into D3hot causes its PCIe link to go to L1 or L2/L3 Ready, which is lower-power than L0. Since the energy used by the system while suspended depends on the state of its PCIe link (as a general rule, the lower-power the state of the link, the less energy the system will use), putting the device into D3hot during suspend-to-idle should be more energy-efficient that leaving it in D0 with disabled ASPM. For this reason, avoid leaving NVMe devices with disabled ASPM in D0 during suspend-to-idle. Instead, shut them down entirely and let the PCI bus type put them into D3. Fixes: d916b1be94b6 ("nvme-pci: use host managed power state for suspend") Link: https://lore.kernel.org/linux-pm/2763495.NmdaWeg79L@kreacher/T/#t Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2019-08-12PCI/ASPM: Add pcie_aspm_enabled()Rafael J. Wysocki
Add a function checking whether or not PCIe ASPM has been enabled for a given device. It will be used by the NVMe driver to decide how to handle the device during system suspend. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-12habanalabs: fix device IRQ unmasking for BE hostBen Segal
When unmasking IRQs inside the ASIC, the driver passes an array of all the IRQ to unmask. The ASIC's CPU is working in LE so when running in a BE host, the driver needs to do the proper endianness swapping when preparing this array. In addition, this patch also fixes the endianness of a couple of kernel log debug messages that print values of packets Signed-off-by: Ben Segal <bpsegal20@gmail.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2019-08-12habanalabs: fix endianness handling for internal QMAN submissionOded Gabbay
The PQs of internal H/W queues (QMANs) can be located in different memory areas for different ASICs. Therefore, when writing PQEs, we need to use the correct function according to the location of the PQ. e.g. if the PQ is located in the device's memory (SRAM or DRAM), we need to use memcpy_toio() so it would work in architectures that have separate address ranges for IO memory. This patch makes the code that writes the PQE to be ASIC-specific so we can handle this properly per ASIC. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Tested-by: Ben Segal <bpsegal20@gmail.com>
2019-08-12habanalabs: fix completion queue handling when host is BEBen Segal
This patch fix the CQ irq handler to work in hosts with BE architecture. It adds the correct endian-swapping macros around the relevant memory accesses. Signed-off-by: Ben Segal <bpsegal20@gmail.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2019-08-12habanalabs: fix endianness handling for packets from userBen Segal
Packets that arrive from the user and need to be parsed by the driver are assumed to be in LE format. This patch fix all the places where the code handles these packets and use the correct endianness macros to handle them, as the driver handles the packets in CPU format (LE or BE depending on the arch). Signed-off-by: Ben Segal <bpsegal20@gmail.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2019-08-12habanalabs: fix DRAM usage accounting on context tear downTomer Tayar
The patch fix the DRAM usage accounting by adding a missing update of the DRAM memory consumption, when a context is being torn down without an organized release of the allocated memory. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2019-08-12habanalabs: Avoid double free in error flowTomer Tayar
In case kernel context init fails during device initialization, both hl_ctx_put() and kfree() are called, ending with a double free of the kernel context. Calling kfree() is needed only when a failure happens between the allocation of the kernel context and its initialization, so move it to there and remove it from the error flow. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2019-08-12usb: gadget: mass_storage: Fix races between fsg_disable and fsg_set_altBenjamin Herrenschmidt
If fsg_disable() and fsg_set_alt() are called too closely to each other (for example due to a quick reset/reconnect), what can happen is that fsg_set_alt sets common->new_fsg from an interrupt while handle_exception is trying to process the config change caused by fsg_disable(): fsg_disable() ... handle_exception() sets state back to FSG_STATE_NORMAL hasn't yet called do_set_interface() or is inside it. ---> interrupt fsg_set_alt sets common->new_fsg queues a new FSG_STATE_CONFIG_CHANGE <--- Now, the first handle_exception can "see" the updated new_fsg, treats it as if it was a fsg_set_alt() response, call usb_composite_setup_continue() etc... But then, the thread sees the second FSG_STATE_CONFIG_CHANGE, and goes back down the same path, wipes and reattaches a now active fsg, and .. calls usb_composite_setup_continue() which at this point is wrong. Not only we get a backtrace, but I suspect the second set_interface wrecks some state causing the host to get upset in my case. This fixes it by replacing "new_fsg" by a "state argument" (same principle) which is set in the same lock section as the state update, and retrieved similarly. That way, there is never any discrepancy between the dequeued state and the observed value of it. We keep the ability to have the latest reconfig operation take precedence, but we guarantee that once "dequeued" the argument (new_fsg) will not be clobbered by any new event. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-12usb: gadget: composite: Clear "suspended" on reset/disconnectBenjamin Herrenschmidt
In some cases, one can get out of suspend with a reset or a disconnect followed by a reconnect. Previously we would leave a stale suspended flag set. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-12usb: gadget: udc: renesas_usb3: Fix sysfs interface of "role"Yoshihiro Shimoda
Since the role_store() uses strncmp(), it's possible to refer out-of-memory if the sysfs data size is smaller than strlen("host"). This patch fixes it by using sysfs_streq() instead of strncmp(). Fixes: cc995c9ec118 ("usb: gadget: udc: renesas_usb3: add support for usb role swap") Cc: <stable@vger.kernel.org> # v4.12+ Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-12 05:52:21 +0000