summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2015-05-04bus: omap_l3_noc: Fix master id address decoding for OMAP5Suman Anna
The L3 Error handling on OMAP5 for the most part is very similar to that of OMAP4, and had leveraged common data structures and register layout definitions so far. Upon closer inspection, there are a few minor differences causing an incorrect decoding and reporting of the master NIU upon an error: 1. The L3_TARG_STDERRLOG_MSTADDR.STDERRLOG_MSTADDR occupies 11 bits on OMAP5 as against 8 bits on OMAP4, with the master NIU connID encoded in the 6 MSBs of the STDERRLOG_MSTADDR field. 2. The CLK3 FlagMux component has 1 input source on OMAP4 and 3 input sources on OMAP5. The common DEBUGSS source is at a different input on each SoC. Fix the above issues by using a OMAP5-specific compatible property and using SoC-specific data where there are differences. Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-04bus: omap_l3_noc: Fix offset for DRA7 CLK1_HOST_CLK1_2 instanceIllia Smyrnov
The base address for DRA7 CLK1_HOST_CLK1_2 host instance is 0x44800000, so correct offset is 0x800000. DRA7 TRM rev X(fewb 2015) has updates for this information. With wrong offset these errors are not correctly cleared by the L3 IRQ handler and cause an continuous interrupt scenario and system lockup. Signed-off-by: Illia Smyrnov <illia.smyrnov@globallogic.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-04libata: Blacklist queued TRIM on all Samsung 800-seriesMartin K. Petersen
The queued TRIM problems appear to be generic to Samsung's firmware and not tied to a particular model. A recent update to the 840 EVO firmware introduced the same issue as we saw on 850 Pro. Blacklist queued TRIM on all 800-series drives while we work this issue with Samsung. Reported-by: Günter Waller <g.wal@web.de> Reported-by: Sven Köhler <sven.koehler@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-04ACPI / PNP: add two IDs to list for PNPACPI device enumerationWitold Szczeponik
Commit eec15edbb0e1 (ACPI / PNP: use device ID list for PNPACPI device enumeration) changed the way how ACPI devices are enumerated and when they are added to the PNP bus. However, it broke the sound card support on (at least) a vintage IBM ThinkPad 600E: with said commit applied, two of the necessary "CSC01xx" devices are not added to the PNP bus and hence can not be found during the initialization of the "snd-cs4236" module. As a consequence, loading "snd-cs4236" causes null pointer exceptions. The attached patch fixes the problem end re-enables sound on the IBM ThinkPad 600E. Fixes: eec15edbb0e1 (ACPI / PNP: use device ID list for PNPACPI device enumeration) Signed-off-by: Witold Szczeponik <Witold.Szczeponik@gmx.net> Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-04pinctrl: mediatek: mtk-common: initialize unmaskColin Ian King
cppcheck detected an uninitialized variable: [drivers/pinctrl/mediatek/pinctrl-mtk-common.c:897]: (error) Uninitialized variable: unmask unmask should be initialized to zero to ensure unmasking only occurs if a previous mask occurred. The current situation is that the unmask variable could contain any random garbage causing random unexpected unmasking. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-04iommu/amd: Fix bug in put_pasid_state_waitOded Gabbay
This patch fixes a bug in put_pasid_state_wait that appeared in kernel 4.0 The bug is that pasid_state->count wasn't decremented before entering the wait_event. Thus, the condition in wait_event will never be true. The fix is to decrement (atomically) the pasid_state->count before the wait_event. Signed-off-by: Oded Gabbay <oded.gabbay@amd.com> Cc: stable@vger.kernel.org #v4.0 Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-05-04hwrng: bcm63xx - Fix driver compilationÁlvaro Fernández Rojas
- s/clk_didsable_unprepare/clk_disable_unprepare - s/prov/priv - s/error/ret (bcm63xx_rng_probe) Fixes: 6229c16060fe ("hwrng: bcm63xx - make use of devm_hwrng_register") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-04mmc: core: add missing pm event in mmc_pm_notify to fix hib restoreGrygorii Strashko
The PM_RESTORE_PREPARE is not handled now in mmc_pm_notify(), as result mmc_rescan() could be scheduled and executed at late hibernation restore stages when MMC device is suspended already - which, in turn, will lead to system crash on TI dra7-evm board: WARNING: CPU: 0 PID: 3188 at drivers/bus/omap_l3_noc.c:148 l3_interrupt_handler+0x258/0x374() 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4_PER1_P3 (Idle): Data Access in User mode during Functional access Hence, add missed PM_RESTORE_PREPARE PM event in mmc_pm_notify(). Fixes: 4c2ef25fe0b8 (mmc: fix all hangs related to mmc/sd card...) Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-05-04macvlan: Propagate promiscuity setting to lower devices.Vlad Yasevich
When a macvlan device is placed in promiscuous mode, it currently just sets it's multicast mask to permissive, but doesn't change the state of the lower device. As a result, not all multicast traffic can be received on such device. Additionally, none of a vlan traffic can be received on such device as well. This patch propagates the promiscuous mode setting to lower device so that lower device may receive all packets that macvlan may be interested in. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-04ixgbevf: Use dev_kfree_skb_any in xmit path, not dev_kfree_skbAlexander Duyck
With netpoll making use of the transmit function it is possible for the ndo_start_xmit function to be called with irqs disabled. As such we need to use dev_kfree_skb_any in the Tx cleanup path for frames that are dropped. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-04r8169: Do not use dev_kfree_skb in xmit pathAlexander Duyck
The function r8169_csum_workaround is called in the ndo_start_xmit path of the r8169 driver. As such it should not be using dev_kfree_skb as it is not irq safe, so instead we should be using dev_kfree_skb_any for freeing in the dropped path, and dev_consume_skb_any for any frames that were transmitted. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-04fm10k: Do not assume budget will never be 0 for NAPIAlexander Duyck
The netpoll path will call napi->poll with a budget of 0 in order to clean the Tx rings only. This change updates the fm10k driver so that it will correctly support that instead of cleaning 1 Rx frame if a budget of 0 is received. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-04net: dsa: mv88e6xxx: unregister mv88e6352 driverVivien Didelot
Add the missing unregister for the mv88e6352_switch_driver. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-03Merge tag 'linux-can-fixes-for-4.1-20150501' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== this is a pull request of a single patch for net/master. The patch is contributed by Jeppe Ledet-Pedersen, it fixes the extended frame handling in the xilinx driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-03drivers/net: include <module.h> for modular stmmac_platform codePaul Gortmaker
This file is built off of a tristate Kconfig option and also contains modular function calls so it should explicitly include module.h to avoid compile breakage during header shuffles done in the future. Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: netdev@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-03Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "One intel fix, one rockchip fix, and a bunch of radeon fixes for some regressions from audio rework and vm stability" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915/chv: Implement WaDisableShadowRegForCpd drm/radeon: fix userptr return value checking (v2) drm/radeon: check new address before removing old one drm/radeon: reset BOs address after clearing it. drm/radeon: fix lockup when BOs aren't part of the VM on release drm/radeon: add SI DPM quirk for Sapphire R9 270 Dual-X 2G GDDR5 drm/radeon: adjust pll when audio is not enabled drm/radeon: only enable audio streams if the monitor supports it drm/radeon: only mark audio as connected if the monitor supports it (v3) drm/radeon/audio: don't enable packets until the end drm/radeon: drop dce6_dp_enable drm/radeon: fix ordering of AVI packet setup drm/radeon: Use drm_calloc_ab for CS relocs drm/rockchip: fix error check when getting irq MAINTAINERS: add entry for Rockchip drm drivers
2015-05-04Merge tag 'drm-intel-fixes-2015-04-30' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes Just a single intel fix * tag 'drm-intel-fixes-2015-04-30' of git://anongit.freedesktop.org/drm-intel: drm/i915/chv: Implement WaDisableShadowRegForCpd
2015-05-04Merge branch 'drm-next0420' of ↵Dave Airlie
https://github.com/markyzq/kernel-drm-rockchip into drm-fixes one fix and maintainers update * 'drm-next0420' of https://github.com/markyzq/kernel-drm-rockchip: drm/rockchip: fix error check when getting irq MAINTAINERS: add entry for Rockchip drm drivers
2015-05-03ath9k: fix per-packet tx power configurationLorenzo Bianconi
Do not use ieee80211_vif pointer in ath_get_rate_txpower() since it has been overwritten by setup_frame_info() and it will result in a corrupted tx power configuration. Set per-packet tx power in setup_frame_info() according to current vif tx power. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-03Merge tag 'iwlwifi-for-kalle-2015-04-28' of ↵Kalle Valo
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * fix firmware API for -13.ucode * fix RSSI handling that avoid bad roaming decision * fix firmware debug * fix MFUART operation * fix ASSERT while restart the hardware (because of another ASSERT e.g)
2015-05-03Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is three logical fixes (as 5 patches). The 3ware class of drivers were causing an oops with multiqueue by tearing down the command mappings after completing the command (where the variables in the command used to tear down the mapping were no-longer valid). There's also a fix for the qnap iscsi target which was choking on us sending it commands that were too long and a fix for the reworked aha1542 allocating GFP_KERNEL under a lock" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: 3w-9xxx: fix command completion race 3w-xxxx: fix command completion race 3w-sas: fix command completion race aha1542: Allocate memory before taking a lock SCSI: add 1024 max sectors black list flag
2015-05-03ideapad_laptop: Add Lenovo G40-30 to devices without radio switchPhilippe Coval
Lenovo G40-30 does not provide any physical radio switch to user. Therefore disable the rfkill switch identically to the Yoga 2 approach. (Note for later, models ids are sorted alphabetically). Benefit is to make wireless available again without unloading module. It was tested successfully on 4.1.0-rc1 base with this model: (LENOVO_MT_80FY_BU_idea_FM_Lenovo G40-30). BugLink: https://bugs.launchpad.net/ideapad-laptop/+bug/1450946 Cc: platform-driver-x86@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Philippe Coval <rzr@gna.org> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-05-03Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave dmaengine fixes from Vinod Koul: "Here are the fixes in dmaengine subsystem for rc2: - privatecnt fix for slave dma request API by Christopher - warn fix for PM ifdef in usb-dmac by Geert - fix hardware dependency for xgene by Jean" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: increment privatecnt when using dma_get_any_slave_channel dmaengine: xgene: Set hardware dependency dmaengine: usb-dmac: Protect PM-only functions to kill warning
2015-05-02target/user: Disallow full passthrough (pass_level=0)Andy Grover
TCMU requires more work to correctly handle both user handlers that want all SCSI commands (pass_level=0) for a se_device, and also handlers that just want I/O commands and let the others be emulated by the kernel (pass_level=1). Only support the latter for now. For full passthrough, we will need to support a second se_subsystem_api template, due to configfs attributes being different between the two modes. Thus pass_level is extraneous, and we can remove it. The ABI break for TCMU v2 is already applied for this release, so it's best to do this now to avoid another ABI break in the future. Signed-off-by: Andy Grover <agrover@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-02ISCSI: fix minor memory leakEvgenii Lepikhin
This patch adds a missing kfree for sess->sess_ops memory upon transport_init_session() failure. Signed-off-by: Evgenii Lepikhin <johnlepikhin@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Receive packet length needs to be adjust by 2 on RX to accomodate the two padding bytes in altera_tse driver. From Vlastimil Setka. 2) If rx frame is dropped due to out of memory in macb driver, we leave the receive ring descriptors in an undefined state. From Punnaiah Choudary Kalluri 3) Some netlink subsystems erroneously signal NLM_F_MULTI. That is only for dumps. Fix from Nicolas Dichtel. 4) Fix mis-use of raw rt->rt_pmtu value in ipv4, one must always go via the ipv4_mtu() helper. From Herbert Xu. 5) Fix null deref in bridge netfilter, and miscalculated lengths in jump/goto nf_tables verdicts. From Florian Westphal. 6) Unhash ping sockets properly. 7) Software implementation of BPF divide did 64/32 rather than 64/64 bit divide. The JITs got it right. Fix from Alexei Starovoitov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (30 commits) ipv4: Missing sk_nulls_node_init() in ping_unhash(). net: fec: Fix RGMII-ID mode net/mlx4_en: Schedule napi when RX buffers allocation fails netxen_nic: use spin_[un]lock_bh around tx_clean_lock net/mlx4_core: Fix unaligned accesses mlx4_en: Use correct loop cursor in error path. cxgb4: Fix MC1 memory offset calculation bnx2x: Delay during kdump load net: Fix Kernel Panic in bonding driver debugfs file: rlb_hash_table net: dsa: Fix scope of eeprom-length property net: macb: Fix race condition in driver when Rx frame is dropped hv_netvsc: Fix a bug in netvsc_start_xmit() altera_tse: Correct rx packet length mlx4: Fix tx ring affinity_mask creation tipc: fix problem with parallel link synchronization mechanism tipc: remove wrong use of NLM_F_MULTI bridge/nl: remove wrong use of NLM_F_MULTI bridge/mdb: remove wrong use of NLM_F_MULTI net: sched: act_connmark: don't zap skb->nfct trivial: net: systemport: bcmsysport.h: fix 0x0x prefix ...
2015-05-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph RBD fix from Sage Weil. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: end I/O the entire obj_request on error
2015-05-01rbd: end I/O the entire obj_request on errorIlya Dryomov
When we end I/O struct request with error, we need to pass obj_request->length as @nr_bytes so that the entire obj_request worth of bytes is completed. Otherwise block layer ends up confused and we trip on rbd_assert(more ^ (which == img_request->obj_request_count)); in rbd_img_obj_callback() due to more being true no matter what. We already do it in most cases but we are missing some, in particular those where we don't even get a chance to submit any obj_requests, due to an early -ENOMEM for example. A number of obj_request->xferred assignments seem to be redundant but I haven't touched any of obj_request->xferred stuff to keep this small and isolated. Cc: Alex Elder <elder@linaro.org> Cc: stable@vger.kernel.org # 3.10+ Reported-by: Shawn Edwards <lesser.evil@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2015-05-01vfio: Fix runaway interruptible timeoutAlex Williamson
Commit 13060b64b819 ("vfio: Add and use device request op for vfio bus drivers") incorrectly makes use of an interruptible timeout. When interrupted, the signal remains pending resulting in subsequent timeouts occurring instantly. This makes the loop spin at a much higher rate than intended. Instead of making this completely non-interruptible, we can change this into a sort of interruptible-once behavior and use the "once" to log debug information. The driver API doesn't allow us to abort and return an error code. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Fixes: 13060b64b819 Cc: stable@vger.kernel.org # v4.0
2015-05-01power: bq27x00_battery: Add missing MODULE_ALIASMarek Belisko
Without MODULE_ALIAS bq27x00_battery module won't get loaded automatically. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-05-01power: reset: Add MFD_SYSCON depends for brcmstbFlorian Fainelli
The Broadcom STB reboot driver depends on MFD_SYSCON, it uses syscon_regmap_lookup_by_phandle() which will not lookup syscon phandles if MFD_SYSCON is disabled, and instead will return -ENOSYS since it is turned into an inline stub. Fixes: 030494e75064c ("power: reset: Add reboot driver for brcmstb") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-05-01vfio-pci: Log device requests more verboselyAlex Williamson
Log some clues indicating whether the user is receiving device request interfaces or not listening. This can help indicate why a driver unbind is blocked or explain why QEMU automatically unplugged a device from the VM. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-05-01net: can: xilinx_can: fix extended frame handlingJeppe Ledet-Pedersen
Using IDR_SRR in RXFIFO_ID to test for the presence of data is only valid for standard frames. For extended frames the bit is always 1 and IDR_RTR should be used instead. This patch switches the check to use CAN_RTR_FLAG which is correctly set when reading the ID. The patch also changes the DW1/DW2 to be read unconditionally, since this is necessary to remove the frame from the RXFIFO. Signed-off-by: Jeppe Ledet-Pedersen <jlp@gomspace.com> Acked-by: Kedareswara rao Appana <appanad@xilinx.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-05-01thermal: Use bool function return values of true/false not 1/0Joe Perches
Use the normal return values for bool functions Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-04-30clk: qcom: Fix MSM8916 gfx3d_clk_src configurationGeorgi Djakov
The gfx3d_clk_src parents configuration is incorrect. Fix it. Fixes: 3966fab8b6ab "clk: qcom: Add MSM8916 Global Clock Controller support" Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-30clk: qcom: Fix MSM8916 venus divider valueGeorgi Djakov
One of the video codec clock frequencies has incorrect divider value. Fix it. Fixes: 3966fab8b6ab "clk: qcom: Add MSM8916 Global Clock Controller support" Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-30Merge tag 'pm+acpi-4.1-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "Three regression fixes this time, one for a recent regression in the cpuidle core affecting multiple systems, one for an inadvertently added duplicate typedef in ACPICA that breaks compilation with GCC 4.5 and one for an ACPI Smart Battery Subsystem driver regression introduced during the 3.18 cycle (stable-candidate). Specifics: - Fix for a regression in the cpuidle core introduced by one of the recent commits in the clockevents_notify() removal series that put a call to a function which had to be executed with disabled interrupts into a code path running with enabled interrupts (Rafael J Wysocki) - Fix for a build problem in ACPICA (with GCC 4.5) introduced by one of the recent ACPICA tools commits that added a duplicate typedef to one of the ACPICA's header files by mistake (Olaf Hering) - Fix for a regression in the ACPI SBS (Smart Battery Subsystem) driver introduced during the 3.18 development cycle causing the smart battery manager to be marked as not present when it should be marked as present (Chris Bainbridge)" * tag 'pm+acpi-4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: Run tick_broadcast_exit() with disabled interrupts ACPI / SBS: Enable battery manager when present ACPICA: remove duplicate u8 typedef
2015-04-30ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBookChris Bainbridge
Commit 7bc5a2bad0b8 'ACPI: Support _OSI("Darwin") correctly' caused the MacBook firmware to expose the SBS, resulting in intermittent hangs of several minutes on boot, and failure to detect or report the battery. Fix this by adding a 5 us delay to the start of each SMBUS transaction. This timing is the result of experimentation - hangs were observed with 3 us but never with 5 us. Fixes: 7bc5a2bad0b8 'ACPI: Support _OSI("Darwin") correctly' Link: https://bugzilla.kernel.org/show_bug.cgi?id=94651 Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> Cc: 3.18+ <stable@vger.kernel.org> # 3.18+ [ rjw: Subject and changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-30net: fec: Fix RGMII-ID modeMarkus Pargmann
RGMII-ID uses an internal delay within the transmitter or receiver. This feature is phy specific. The rest of the communication is normal RGMII. So the fec driver has to check for all RGMII modes, not only 'PHY_INTERFACE_MODE_RGMII'. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30net/mlx4_en: Schedule napi when RX buffers allocation failsIdo Shamay
When system is out of memory, refilling of RX buffers fails while the driver continue to pass the received packets to the kernel stack. At some point, when all RX buffers deplete, driver may fall into a sleep, and not recover when memory for new RX buffers is once again availible. This is because hardware does not have valid descriptors, so no interrupt will be generated for the driver to return to work in napi context. Fix it by schedule the napi poll function from stats_task delayed workqueue, as long as the allocations fail. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30netxen_nic: use spin_[un]lock_bh around tx_clean_lockTony Camuso
While testing this driver with DEBUG_LOCKDEP and DEBUG_SPINLOCK enabled did not produce any traces, it would be more prudent in the case of tx_clean_lock to use spin_[un]lock_bh, since this lock is manipulated in both the process and softirq contexts. This patch was tested for functionality and regressions with netperf and DEBUG_LOCKDEP and DEBUG_SPINLOCK enabled. Signed-off-by: Tony Camuso <tcamuso@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30net/mlx4_core: Fix unaligned accessesDavid Ahern
Addresses the following kernel logs seen during boot: Kernel unaligned access at TPC[100ee150] mlx4_QUERY_HCA+0x80/0x248 [mlx4_core] Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core] Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core] Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core] Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core] Signed-off-by: David Ahern <david.ahern@oracle.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30mlx4_en: Use correct loop cursor in error path.Benjamin Poirier
Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Fixes: 9e311e7 ("net/mlx4_en: Use affinity hint") Acked-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30x86/PCI/ACPI: Make all resources except [io 0xcf8-0xcff] available on PCI busJiang Liu
An IO port or MMIO resource assigned to a PCI host bridge may be consumed by the host bridge itself or available to its child bus/devices. The ACPI specification defines a bit (Producer/Consumer) to tell whether the resource is consumed by the host bridge itself, but firmware hasn't used that bit consistently, so we can't rely on it. Before commit 593669c2ac0f ("x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementation"), arch/x86/pci/acpi.c ignored all IO port resources defined by acpi_resource_io and acpi_resource_fixed_io to filter out IO ports consumed by the host bridge itself. Commit 593669c2ac0f ("x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementation") started accepting all IO port and MMIO resources, which caused a regression that IO port resources consumed by the host bridge itself became available to its child devices. Then commit 63f1789ec716 ("x86/PCI/ACPI: Ignore resources consumed by host bridge itself") ignored resources consumed by the host bridge itself by checking the IORESOURCE_WINDOW flag, which accidently removed MMIO resources defined by acpi_resource_memory24, acpi_resource_memory32 and acpi_resource_fixed_memory32. On x86 and IA64 platforms, all IO port and MMIO resources are assumed to be available to child bus/devices except one special case: IO port [0xCF8-0xCFF] is consumed by the host bridge itself to access PCI configuration space. So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF]. This solution will also ease the way to consolidate ACPI PCI host bridge common code from x86, ia64 and ARM64. Related ACPI table are archived at: https://bugzilla.kernel.org/show_bug.cgi?id=94221 Related discussions at: http://patchwork.ozlabs.org/patch/461633/ https://lkml.org/lkml/2015/3/29/304 Fixes: 63f1789ec716 (Ignore resources consumed by host bridge itself) Reported-by: Bernhard Thaler <bernhard.thaler@wvnet.at> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: 4.0+ <stable@vger.kernel.org> # 4.0+ Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-30Merge branches 'acpica', 'acpi-battery' and 'pm-cpuidle'Rafael J. Wysocki
2015-04-30at86rf230: add slp_tr support to start txAlexander Aring
This patch adds support for one of the slp_tr gpio use cases which indicates the TX_START command without doing some spi bus traffic. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-30at86rf230: change state change if from trx_offAlexander Aring
If a transmit ends in a calibration which means the transceiver do a TRX_OFF state change, we can directly change into TX_ARET state instead doing a TX_ON to TX_ARET statechange. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-30at86rf230: remove unnecessary tx state changeAlexander Aring
All supported transceivers can do a valid state change from TRX_OFF to AACK_ON. This patch removes the state change chain from TRX_OFF -> TX_ON -> AACK_ON instead we doing a directly state change from TRX_OFF to AACK_ON. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-30at86rf230: add TX_ARET_ON for calibration timeoutAlexander Aring
This patch adds a calibration timeout reset when change from TRX_OFF to TX_ARET_ON which also occurs a calibration. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-30at86rf230: move cal_timeout to state changeAlexander Aring
This patch moves the calculation timeout of TRX_OFF to RX_AACK_ON handling to the async state change functionality. With this patch we can do a reset of calculation timeout when others TRX_OFF to RX_AACK_ON happens instead of doing this on interface up only. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit (git 2.34.1) at 2025-10-03 09:36:34 +0000