| Age | Commit message (Collapse) | Author |
|---|
|
Thomas reported connection issues on AMD system with Pluggable UD-4VPD
dock. After some experiments it looks like the device has some sort of
internal timeout that triggers reconnect. This is completely against the
USB4 spec, as there is no requirement for the host to enumerate the
device right away or even at all.
In Linux case the delay is caused by scanning of retimers on the link so
we can work this around by doing the scanning after the device router
has been enumerated.
Reported-by: Thomas Lynema <lyz27@yahoo.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219748
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
'cts' in sdio_uart_check_modem_status() is considered a 'bool', but
typed as signed 'int'. Make it 'bool' so it is clear the code does not
care about the masked value, but true/false.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250317070046.24386-18-jirislaby@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Currently, scmi_pd_power() explicitly verifies whether the requested
power state was applied by calling state_get(). While this check could
detect failures where the state was not properly updated, ensuring
correctness is the responsibility of the SCMI firmware.
Removing this redundant state_get() call eliminates an unnecessary
round-trip to the firmware, improving efficiency. Any mismatches
between the requested and actual states should be handled by the SCMI
firmware, which must return a failure if state_set() is unsuccessful.
Additionally, in some cases, checking the state after powering off a
domain may be unreliable or unsafe, depending on the firmware
implementation.
This patch removes the redundant verification, simplifying the function
without compromising correctness.
Reported-and-tested-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20250314095851.443979-1-sudeep.holla@arm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Kconfig treats the dependency as optional, but the header file only provides
normal declarations and no empty API stubs:
ld: fs/btrfs/extent_io.o: in function `writepage_delalloc':
extent_io.c:(.text+0x2b42): undefined reference to `__udivdi3'
ld: drivers/pmdomain/thead/th1520-pm-domains.o: in function `th1520_pd_power_off':
th1520-pm-domains.c:(.text+0x57): undefined reference to `th1520_aon_power_update'
ld: drivers/pmdomain/thead/th1520-pm-domains.o: in function `th1520_pd_power_on':
th1520-pm-domains.c:(.text+0x8a): undefined reference to `th1520_aon_power_update'
ld: drivers/pmdomain/thead/th1520-pm-domains.o: in function `th1520_pd_probe':
th1520-pm-domains.c:(.text+0xb8): undefined reference to `th1520_aon_init'
ld: th1520-pm-domains.c:(.text+0x1c6): undefined reference to `th1520_aon_power_update'
Since the firmware code can easily be enabled for compile testing, there
is no need to add stubs either, so just make it a hard dependency.
Fixes: dc9a897dbb03 ("pmdomain: thead: Add power-domain driver for TH1520")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://lore.kernel.org/r/20250314154834.4053416-1-arnd@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Amlogic A4 SoCs support 12 GPIO IRQ lines and 2 AO GPIO IRQ lines,
A5 SoCs support 12 GPIO IRQ lines, details are as below.
A4 IRQ Number:
- 72:55 18 pins on bank T
- 54:32 23 pins on bank X
- 31:16 16 pins on bank D
- 15:14 2 pins on bank E
- 13:0 14 pins on bank B
A4 AO IRQ Number:
- 7 1 pin on bank TESTN
- 6:0 7 pins on bank AO
A5 IRQ Number:
- 98 1 pin on bank TESTN
- 97:82 16 pins on bank Z
- 81:62 20 pins on bank X
- 61:48 14 pins on bank T
- 47:32 16 pins on bank D
- 31:27 5 pins on bank H
- 26:25 2 pins on bank E
- 24:14 11 pins on bank C
- 13:0 14 pins on bank B
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20250311-irqchip-gpio-a4-a5-v5-2-ca4cc276c18c@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-15-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-14-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-13-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-12-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-11-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-10-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-9-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-8-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Reduce the code complexity by using automatic lock guards with the
spinlock.
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-7-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-6-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-5-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-4-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-3-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-2-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Reduce the code complexity by using automatic lock guards with the raw
spinlock.
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-1-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next
Linux 6.14-rc7
|
|
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the
multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies
+secs_to_jiffies
(E
- * \( 1000 \| MSEC_PER_SEC \)
)
Link: https://lkml.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-3-a43967e36c88@linux.microsoft.com
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Maol <dlemoal@kernel.org>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Dongsheng Yang <dongsheng.yang@easystack.cn>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Frank Li <frank.li@nxp.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: James Bottomley <james.bottomley@HansenPartnership.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Niklas Cassel <cassel@kernel.org>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Shyam-sundar S-k <Shyam-sundar.S-k@amd.com>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the
multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies(E * 1000)
+secs_to_jiffies(E)
-msecs_to_jiffies(E * MSEC_PER_SEC)
+secs_to_jiffies(E)
While here, convert some timeouts that are denominated in seconds
manually.
[akpm@linux-foundation.org: fix build]
Link: https://lkml.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-2-a43967e36c88@linux.microsoft.com
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Maol <dlemoal@kernel.org>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Dongsheng Yang <dongsheng.yang@easystack.cn>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Frank Li <frank.li@nxp.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: James Bottomley <james.bottomley@HansenPartnership.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Niklas Cassel <cassel@kernel.org>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Shyam-sundar S-k <Shyam-sundar.S-k@amd.com>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In the general case, we don't know which of system shutdown or reboot is
the better action to take to protect hardware in an emergency situation.
We thus allow the policy to come from the device-tree in the form of an
optional critical-action OF property, but so far there was no way for the
end user to configure this.
With recent addition of the hw_protection parameter, the user can now
choose a default action for the case, where the driver isn't fully sure
what's the better course of action.
Let's make use of this by passing HWPROT_ACT_DEFAULT in absence of the
critical-action OF property.
As HWPROT_ACT_DEFAULT is shutdown by default, this introduces no
functional change for users, unless they start using the new parameter.
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-11-e1c09b090c0c@pengutronix.de
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matteo Croce <teknoraver@meta.com>
Cc: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In the general case, a driver doesn't know which of system shutdown or
reboot is the better action to take to protect hardware in an emergency
situation. For this reason, hw_protection_shutdown is going to be removed
in favor of hw_protection_trigger, which defaults to shutdown, but may be
configured at kernel runtime to be a reboot instead.
The ChromeOS EC situation is different as we do know that shutdown is the
correct action as the EC is programmed to force reset after the short
period, thus replace hw_protection_shutdown with __hw_protection_trigger
with HWPROT_ACT_SHUTDOWN as argument to maintain the same behavior.
No functional change.
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-9-e1c09b090c0c@pengutronix.de
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matteo Croce <teknoraver@meta.com>
Cc: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the core detects permanent regulator hardware failure or imminent
power failure of a critical supply, it will call hw_protection_shutdown in
an attempt to do a limited orderly shutdown followed by powering off the
system.
This doesn't work out well for many unattended embedded systems that don't
have support for shutdown and that power on automatically when power is
supplied:
- A brief power cycle gets detected by the driver
- The kernel powers down the system and SoC goes into shutdown mode
- Power is restored
- The system remains oblivious to the restored power
- System needs to be manually power cycled for a duration long enough
to drain the capacitors
Allow users to fix this by calling the newly introduced
hw_protection_trigger() instead: This way the hw_protection commandline or
sysfs parameter is used to dictate the policy of dealing with the
regulator fault.
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-8-e1c09b090c0c@pengutronix.de
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: Benson Leung <bleung@chromium.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matteo Croce <teknoraver@meta.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
for_each_possible_cpu() is currently used to initialize cpufreq.
However, in cpu_dev_register_generic(), for_each_present_cpu()
is used to register CPU devices which means the CPU devices are
only registered for present CPUs and not all possible CPUs.
With nosmp or maxcpus=0, only the boot CPU is present, lead
to the cpufreq probe failure or defer probe due to no cpu device
available for not present CPUs.
Change for_each_possible_cpu() to for_each_present_cpu() in the
above cpufreq drivers to ensure it only registers cpufreq for
CPUs that are actually present.
Fixes: b0c69e1214bc ("drivers: base: Use present CPUs in GENERIC_CPU_DEVICES")
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Explicitly state that zcomp compress/decompress must be called from
non-atomic context.
Link: https://lkml.kernel.org/r/20250303022425.285971-20-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Ensure the page used for local object data is freed on error out path.
Link: https://lkml.kernel.org/r/20250303022425.285971-19-senozhatsky@chromium.org
Fixes: 330edc2bc059 (zram: rework writeback target selection strategy)
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Ensure the page used for local object data is freed on error out path.
Link: https://lkml.kernel.org/r/20250303022425.285971-18-senozhatsky@chromium.org
Fixes: 3f909a60cec1 ("zram: rework recompress target selection strategy")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When configured with pre-trained compression/decompression dictionary
support, zstd requires custom memory allocator, which it calls internally
from compression()/decompression() routines. That means allocation from
atomic context (either under entry spin-lock, or per-CPU local-lock or
both). Now, with non-atomic zram read()/write(), those limitations are
relaxed and we can allow direct and indirect reclaim.
Link: https://lkml.kernel.org/r/20250303022425.285971-17-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use new read/write zsmalloc object API. For cases when RO mapped object
spans two physical pages (requires temp buffer) compression streams now
carry around one extra physical page.
Link: https://lkml.kernel.org/r/20250303022425.285971-16-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Allocate post-processing target in place_pp_slot(). This simplifies
scan_slots_for_writeback() and scan_slots_for_recompress() loops because
we don't need to track pps pointer state anymore. Previously we have to
explicitly NULL the point if it has been added to a post-processing bucket
or re-use previously allocated pointer otherwise and make sure we don't
leak the memory in the end.
We are also fine doing GFP_NOIO allocation, as post-processing can be
called under memory pressure so we better pick as many slots as we can as
soon as we can and start post-processing them, possibly saving the memory.
Allocation failure there is not fatal, we will post-process whatever we
put into the buckets on previous iterations.
Link: https://lkml.kernel.org/r/20250303022425.285971-12-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reworks recompression loop handling:
- set a rule that stream-put NULLs the stream pointer If the loop
returns with a non-NULL stream then it's a successful recompression,
otherwise the stream should always be NULL.
- do not count the number of recompressions Mark object as
incompressible as soon as the algorithm with the highest priority failed
to compress that object.
- count compression errors as resource usage Even if compression has
failed, we still need to bump num_recomp_pages counter.
Link: https://lkml.kernel.org/r/20250303022425.285971-11-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Do no select for post processing slots that are already compressed with
same or higher priority compression algorithm.
This should save some memory, as previously we would still put those
entries into corresponding post-processing buckets and filter them out
later in recompress_slot().
Link: https://lkml.kernel.org/r/20250303022425.285971-10-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the actual number of algorithms zram was configure with instead of
theoretical limit of ZRAM_MAX_COMPS.
Also make sure that min prio is not above max prio.
Link: https://lkml.kernel.org/r/20250303022425.285971-9-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There is no zsmalloc handle allocation slow path now and writestall is not
possible any longer. Remove it from zram_stats.
Link: https://lkml.kernel.org/r/20250303022425.285971-8-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We normally use __GFP_NOWARN for zsmalloc handle allocations, add it to
write_incompressible_page() allocation too.
Link: https://lkml.kernel.org/r/20250303022425.285971-7-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Previously zram write() was atomic which required us to pass
__GFP_KSWAPD_RECLAIM to zsmalloc handle allocation on a fast path and
attempt a slow path allocation (with recompression) if the fast path
failed.
Since we are not in atomic context anymore we can permit direct reclaim
during handle allocation, and hence can have a single allocation path.
There is no slow path anymore so we don't unlock per-CPU stream (and don't
lose compressed data) which means that there is no need to do
recompression now (which should reduce CPU and battery usage).
Link: https://lkml.kernel.org/r/20250303022425.285971-6-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
max_comp_streams device attribute has been defunct since May 2016 when
zram switched to per-CPU compression streams, remove it.
Link: https://lkml.kernel.org/r/20250303022425.285971-5-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We stopped using crypto API (for the time being), so remove its include
and replace CRYPTO_MAX_ALG_NAME with a local define.
Link: https://lkml.kernel.org/r/20250303022425.285971-4-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, per-CPU stream access is done from a non-preemptible (atomic)
section, which imposes the same atomicity requirements on compression
backends as entry spin-lock, and makes it impossible to use algorithms
that can schedule/wait/sleep during compression and decompression.
Switch to preemptible per-CPU model, similar to the one used in zswap.
Instead of a per-CPU local lock, each stream carries a mutex which is
locked throughout entire time zram uses it for compression or
decompression, so that cpu-dead event waits for zram to stop using a
particular per-CPU stream and release it.
Link: https://lkml.kernel.org/r/20250303022425.285971-3-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Suggested-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Reviewed-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "zsmalloc/zram: there be preemption", v10.
Currently zram runs compression and decompression in non-preemptible
sections, e.g.
zcomp_stream_get() // grabs CPU local lock
zcomp_compress()
or
zram_slot_lock() // grabs entry spin-lock
zcomp_stream_get() // grabs CPU local lock
zs_map_object() // grabs rwlock and CPU local lock
zcomp_decompress()
Potentially a little troublesome for a number of reasons.
For instance, this makes it impossible to use async compression algorithms
or/and H/W compression algorithms, which can wait for OP completion or
resource availability. This also restricts what compression algorithms
can do internally, for example, zstd can allocate internal state memory
for C/D dictionaries:
do_fsync()
do_writepages()
zram_bio_write()
zram_write_page() // become non-preemptible
zcomp_compress()
zstd_compress()
ZSTD_compress_usingCDict()
ZSTD_compressBegin_usingCDict_internal()
ZSTD_resetCCtx_usingCDict()
ZSTD_resetCCtx_internal()
zstd_custom_alloc() // memory allocation
Not to mention that the system can be configured to maximize compression
ratio at a cost of CPU/HW time (e.g. lz4hc or deflate with very high
compression level) so zram can stay in non-preemptible section (even under
spin-lock or/and rwlock) for an extended period of time. Aside from
compression algorithms, this also restricts what zram can do. One
particular example is zram_write_page() zsmalloc handle allocation, which
has an optimistic allocation (disallowing direct reclaim) and a
pessimistic fallback path, which then forces zram to compress the page one
more time.
This series changes zram to not directly impose atomicity restrictions on
compression algorithms (and on itself), which makes zram write() fully
preemptible; zram read(), sadly, is not always preemptible yet. There are
still indirect atomicity restrictions imposed by zsmalloc(). One notable
example is object mapping API, which returns with: a) local CPU lock held
b) zspage rwlock held
First, zsmalloc's zspage lock is converted from rwlock to a special type
of RW-lookalike look with some extra guarantees/features. Second, a new
handle mapping is introduced which doesn't use per-CPU buffers (and hence
no local CPU lock), does fewer memcpy() calls, but requires users to
provide a pointer to temp buffer for object copy-in (when needed). Third,
zram is converted to the new zsmalloc mapping API and thus zram read()
becomes preemptible.
This patch (of 19):
Concurrent modifications of meta table entries is now handled by per-entry
spin-lock. This has a number of shortcomings.
First, this imposes atomic requirements on compression backends. zram can
call both zcomp_compress() and zcomp_decompress() under entry spin-lock,
which implies that we can use only compression algorithms that don't
schedule/sleep/wait during compression and decompression. This, for
instance, makes it impossible to use some of the ASYNC compression
algorithms (H/W compression, etc.) implementations.
Second, this can potentially trigger watchdogs. For example, entry
re-compression with secondary algorithms is performed under entry
spin-lock. Given that we chain secondary compression algorithms and that
some of them can be configured for best compression ratio (and worst
compression speed) zram can stay under spin-lock for quite some time.
Having a per-entry mutex (or, for instance, a rw-semaphore) significantly
increases sizeof() of each entry and hence the meta table. Therefore
entry locking returns back to bit locking, as before, however, this time
also preempt-rt friendly, because if waits-on-bit instead of
spinning-on-bit. Lock owners are also now permitted to schedule, which is
a first step on the path of making zram non-atomic.
Link: https://lkml.kernel.org/r/20250303022425.285971-1-senozhatsky@chromium.org
Link: https://lkml.kernel.org/r/20250303022425.285971-2-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With the introduction of mapping_wrprotect_range() there is no need to use
folio_mkclean() in order to write-protect mappings of frame buffer pages,
and therefore no need to inappropriately set kernel-allocated page->index,
mapping fields to permit this operation.
Instead, store the pointer to the page cache object for the mapped driver
in the fb_deferred_io object, and use the already stored page offset from
the pageref object to look up mappings in order to write-protect them.
This is justified, as for the page objects to store a mapping pointer at
the point of assignment of pages, they must all reference the same
underlying address_space object. Since the life time of the pagerefs is
also the lifetime of the fb_deferred_io object, storing the pointer here
makes sense.
This eliminates the need for all of the logic around setting and
maintaining page->index,mapping which we remove.
This eliminates the use of folio_mkclean() entirely but otherwise should
have no functional change.
[lorenzo.stoakes@oracle.com: fixup unused variable warnings]
Link: https://lkml.kernel.org/r/d4018405-2762-4385-a816-e54cc23839ac@lucifer.local
Link: https://lkml.kernel.org/r/81171ab16c14e3df28f6de9d14982cee528d8519.1739029358.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Kajtar Zsolt <soci@c64.rulez.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: Maíra Canal <mcanal@igalia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The single "real" user in the tree of make_device_exclusive_range() always
requests making only a single address exclusive. The current
implementation is hard to fix for properly supporting anonymous THP /
large folios and for avoiding messing with rmap walks in weird ways.
So let's always process a single address/page and return folio + page to
minimize page -> folio lookups. This is a preparation for further
changes.
Reject any non-anonymous or hugetlb folios early, directly after GUP.
While at it, extend the documentation of make_device_exclusive() to
clarify some things.
Link: https://lkml.kernel.org/r/20250210193801.781278-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Lyude <lyude@redhat.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yanteng Si <si.yanteng@linux.dev>
Cc: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
No need to specify position at the first writing to the buf because the
@len is always 0 at this time. Use sysfs_emit() instead to simplify it.
Also avoid setting/checking default_zone with a conditional operator.
Link: https://lkml.kernel.org/r/20250108015223.1522887-1-ruansy.fnst@fujitsu.com
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1 into char-misc-next
Krzysztof writes:
1-Wire bus drivers for v6.14
1. W1 UART: Fix theoretical NULL pointer dereference in probe due to
serdev ops being set too late. That's said such scenario is unlikely
to happen as serdev read would need to happen before writing
anything.
2. W1 therm: Simplify with HWMON_CHANNEL_INFO.
* tag 'w1-drv-6.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1:
w1: w1_therm: w1: Use HWMON_CHANNEL_INFO macro to simplify code
w1: fix NULL pointer dereference in probe
|
|
This clock can't be enable with VENUS_CORE0 GDSC turned off. But that
GDSC is under HW control so it can be turned off at any moment.
Instead of checking the dependent clock we can just vote for it to
enable later when GDSC gets turned on.
Fixes: 9bb6cfc3c77e6 ("clk: qcom: Add Global Clock Controller driver for MSM8953")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20250315-clock-fix-v1-2-2efdc4920dda@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
This clock can't be enable with VENUS_CORE0 GDSC turned off. But that
GDSC is under HW control so it can be turned off at any moment.
Instead of checking the dependent clock we can just vote for it to
enable later when GDSC gets turned on.
Fixes: 5db3ae8b33de6 ("clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver")
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20250315-clock-fix-v1-1-2efdc4920dda@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When the allocation of the OOB buffer fails, the
qcom_spi_ecc_init_ctx_pipelined() function returns without freeing
the memory allocated for 'ecc_cfg' thus it can cause a memory leak.
Call kfree() to free 'ecc_cfg' before returning from the function
to avoid that.
Fixes: 7304d1909080 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250313-qpic-snand-memleak-fix-v1-1-e54e78d1da3a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
