summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-05-14Merge branch 'block-6.15' of ↵Carlos Maiolino
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block into xfs-6.16-merge Merging block tree into XFS because of some dependencies like bdev_validate_blocksize() Signed-off-by: Carlos Maiolino <cem@kernel.org>
2025-05-07nvme: unblock ctrl state transition for firmware updateDaniel Wagner
The original nvme subsystem design didn't have a CONNECTING state; the state machine allowed transitions from RESETTING to LIVE directly. With the introduction of nvme fabrics the CONNECTING state was introduce. Over time the nvme-pci started to use the CONNECTING state as well. Eventually, a bug fix for the nvme-fc started to depend that the only valid transition to LIVE was from CONNECTING. Though this change didn't update the firmware update handler which was still depending on RESETTING to LIVE transition. The simplest way to address it for the time being is to switch into CONNECTING state before going to LIVE state. Fixes: d2fe192348f9 ("nvme: only allow entering LIVE from CONNECTING state") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Daniel Wagner <wagi@kernel.org> Closes: https://lore.kernel.org/all/0134ea15-8d5f-41f7-9e9a-d7e6d82accaa@roeck-us.net Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2025-05-05loop: Add sanity check for read/write_iterLizhi Xu
Some file systems do not support read_iter/write_iter, such as selinuxfs in this issue. So before calling them, first confirm that the interface is supported and then call it. It is releavant in that vfs_iter_read/write have the check, and removal of their used caused szybot to be able to hit this issue. Fixes: f2fed441c69b ("loop: stop using vfs_iter__{read,write} for buffered I/O") Reported-by: syzbot+6af973a3b8dfd2faefdc@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6af973a3b8dfd2faefdc Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250428143626.3318717-1-lizhi.xu@windriver.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-30nvmet-auth: always free derived key dataHannes Reinecke
After calling nvme_auth_derive_tls_psk() we need to free the resulting psk data, as either TLS is disable (and we don't need the data anyway) or the psk data is copied into the resulting key (and can be free, too). Fixes: fa2e0f8bbc68 ("nvmet-tcp: support secure channel concatenation") Reported-by: Yi Zhang <yi.zhang@redhat.com> Suggested-by: Maurizio Lombardi <mlombard@bsdbackstore.eu> Signed-off-by: Hannes Reinecke <hare@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2025-04-30nvmet-tcp: don't restore null sk_state_changeAlistair Francis
queue->state_change is set as part of nvmet_tcp_set_queue_sock(), but if the TCP connection isn't established when nvmet_tcp_set_queue_sock() is called then queue->state_change isn't set and sock->sk->sk_state_change isn't replaced. As such we don't need to restore sock->sk->sk_state_change if queue->state_change is NULL. This avoids NULL pointer dereferences such as this: [ 286.462026][ C0] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 286.462814][ C0] #PF: supervisor instruction fetch in kernel mode [ 286.463796][ C0] #PF: error_code(0x0010) - not-present page [ 286.464392][ C0] PGD 8000000140620067 P4D 8000000140620067 PUD 114201067 PMD 0 [ 286.465086][ C0] Oops: Oops: 0010 [#1] SMP KASAN PTI [ 286.465559][ C0] CPU: 0 UID: 0 PID: 1628 Comm: nvme Not tainted 6.15.0-rc2+ #11 PREEMPT(voluntary) [ 286.466393][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 [ 286.467147][ C0] RIP: 0010:0x0 [ 286.467420][ C0] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 286.467977][ C0] RSP: 0018:ffff8883ae008580 EFLAGS: 00010246 [ 286.468425][ C0] RAX: 0000000000000000 RBX: ffff88813fd34100 RCX: ffffffffa386cc43 [ 286.469019][ C0] RDX: 1ffff11027fa68b6 RSI: 0000000000000008 RDI: ffff88813fd34100 [ 286.469545][ C0] RBP: ffff88813fd34160 R08: 0000000000000000 R09: ffffed1027fa682c [ 286.470072][ C0] R10: ffff88813fd34167 R11: 0000000000000000 R12: ffff88813fd344c3 [ 286.470585][ C0] R13: ffff88813fd34112 R14: ffff88813fd34aec R15: ffff888132cdd268 [ 286.471070][ C0] FS: 00007fe3c04c7d80(0000) GS:ffff88840743f000(0000) knlGS:0000000000000000 [ 286.471644][ C0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 286.472543][ C0] CR2: ffffffffffffffd6 CR3: 000000012daca000 CR4: 00000000000006f0 [ 286.473500][ C0] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 286.474467][ C0] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400 [ 286.475453][ C0] Call Trace: [ 286.476102][ C0] <IRQ> [ 286.476719][ C0] tcp_fin+0x2bb/0x440 [ 286.477429][ C0] tcp_data_queue+0x190f/0x4e60 [ 286.478174][ C0] ? __build_skb_around+0x234/0x330 [ 286.478940][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.479659][ C0] ? __pfx_tcp_data_queue+0x10/0x10 [ 286.480431][ C0] ? tcp_try_undo_loss+0x640/0x6c0 [ 286.481196][ C0] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90 [ 286.482046][ C0] ? kvm_clock_get_cycles+0x14/0x30 [ 286.482769][ C0] ? ktime_get+0x66/0x150 [ 286.483433][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.484146][ C0] tcp_rcv_established+0x6e4/0x2050 [ 286.484857][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.485523][ C0] ? ipv4_dst_check+0x160/0x2b0 [ 286.486203][ C0] ? __pfx_tcp_rcv_established+0x10/0x10 [ 286.486917][ C0] ? lock_release+0x217/0x2c0 [ 286.487595][ C0] tcp_v4_do_rcv+0x4d6/0x9b0 [ 286.488279][ C0] tcp_v4_rcv+0x2af8/0x3e30 [ 286.488904][ C0] ? raw_local_deliver+0x51b/0xad0 [ 286.489551][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.490198][ C0] ? __pfx_tcp_v4_rcv+0x10/0x10 [ 286.490813][ C0] ? __pfx_raw_local_deliver+0x10/0x10 [ 286.491487][ C0] ? __pfx_nf_confirm+0x10/0x10 [nf_conntrack] [ 286.492275][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.492900][ C0] ip_protocol_deliver_rcu+0x8f/0x370 [ 286.493579][ C0] ip_local_deliver_finish+0x297/0x420 [ 286.494268][ C0] ip_local_deliver+0x168/0x430 [ 286.494867][ C0] ? __pfx_ip_local_deliver+0x10/0x10 [ 286.495498][ C0] ? __pfx_ip_local_deliver_finish+0x10/0x10 [ 286.496204][ C0] ? ip_rcv_finish_core+0x19a/0x1f20 [ 286.496806][ C0] ? lock_release+0x217/0x2c0 [ 286.497414][ C0] ip_rcv+0x455/0x6e0 [ 286.497945][ C0] ? __pfx_ip_rcv+0x10/0x10 [ 286.498550][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.499137][ C0] ? __pfx_ip_rcv_finish+0x10/0x10 [ 286.499763][ C0] ? lock_release+0x217/0x2c0 [ 286.500327][ C0] ? dl_scaled_delta_exec+0xd1/0x2c0 [ 286.500922][ C0] ? __pfx_ip_rcv+0x10/0x10 [ 286.501480][ C0] __netif_receive_skb_one_core+0x166/0x1b0 [ 286.502173][ C0] ? __pfx___netif_receive_skb_one_core+0x10/0x10 [ 286.502903][ C0] ? lock_acquire+0x2b2/0x310 [ 286.503487][ C0] ? process_backlog+0x372/0x1350 [ 286.504087][ C0] ? lock_release+0x217/0x2c0 [ 286.504642][ C0] process_backlog+0x3b9/0x1350 [ 286.505214][ C0] ? process_backlog+0x372/0x1350 [ 286.505779][ C0] __napi_poll.constprop.0+0xa6/0x490 [ 286.506363][ C0] net_rx_action+0x92e/0xe10 [ 286.506889][ C0] ? __pfx_net_rx_action+0x10/0x10 [ 286.507437][ C0] ? timerqueue_add+0x1f0/0x320 [ 286.507977][ C0] ? sched_clock_cpu+0x68/0x540 [ 286.508492][ C0] ? lock_acquire+0x2b2/0x310 [ 286.509043][ C0] ? kvm_sched_clock_read+0xd/0x20 [ 286.509607][ C0] ? handle_softirqs+0x1aa/0x7d0 [ 286.510187][ C0] handle_softirqs+0x1f2/0x7d0 [ 286.510754][ C0] ? __pfx_handle_softirqs+0x10/0x10 [ 286.511348][ C0] ? irqtime_account_irq+0x181/0x290 [ 286.511937][ C0] ? __dev_queue_xmit+0x85d/0x3450 [ 286.512510][ C0] do_softirq.part.0+0x89/0xc0 [ 286.513100][ C0] </IRQ> [ 286.513548][ C0] <TASK> [ 286.513953][ C0] __local_bh_enable_ip+0x112/0x140 [ 286.514522][ C0] ? __dev_queue_xmit+0x85d/0x3450 [ 286.515072][ C0] __dev_queue_xmit+0x872/0x3450 [ 286.515619][ C0] ? nft_do_chain+0xe16/0x15b0 [nf_tables] [ 286.516252][ C0] ? __pfx___dev_queue_xmit+0x10/0x10 [ 286.516817][ C0] ? selinux_ip_postroute+0x43c/0xc50 [ 286.517433][ C0] ? __pfx_selinux_ip_postroute+0x10/0x10 [ 286.518061][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.518606][ C0] ? ip_output+0x164/0x4a0 [ 286.519149][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.519671][ C0] ? ip_finish_output2+0x17d5/0x1fb0 [ 286.520258][ C0] ip_finish_output2+0xb4b/0x1fb0 [ 286.520787][ C0] ? __pfx_ip_finish_output2+0x10/0x10 [ 286.521355][ C0] ? __ip_finish_output+0x15d/0x750 [ 286.521890][ C0] ip_output+0x164/0x4a0 [ 286.522372][ C0] ? __pfx_ip_output+0x10/0x10 [ 286.522872][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.523402][ C0] ? _raw_spin_unlock_irqrestore+0x4c/0x60 [ 286.524031][ C0] ? __pfx_ip_finish_output+0x10/0x10 [ 286.524605][ C0] ? __ip_queue_xmit+0x999/0x2260 [ 286.525200][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.525744][ C0] ? ipv4_dst_check+0x16a/0x2b0 [ 286.526279][ C0] ? lock_release+0x217/0x2c0 [ 286.526793][ C0] __ip_queue_xmit+0x1883/0x2260 [ 286.527324][ C0] ? __skb_clone+0x54c/0x730 [ 286.527827][ C0] __tcp_transmit_skb+0x209b/0x37a0 [ 286.528374][ C0] ? __pfx___tcp_transmit_skb+0x10/0x10 [ 286.528952][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.529472][ C0] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90 [ 286.530152][ C0] ? trace_hardirqs_on+0x12/0x120 [ 286.530691][ C0] tcp_write_xmit+0xb81/0x88b0 [ 286.531224][ C0] ? mod_memcg_state+0x4d/0x60 [ 286.531736][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.532253][ C0] __tcp_push_pending_frames+0x90/0x320 [ 286.532826][ C0] tcp_send_fin+0x141/0xb50 [ 286.533352][ C0] ? __pfx_tcp_send_fin+0x10/0x10 [ 286.533908][ C0] ? __local_bh_enable_ip+0xab/0x140 [ 286.534495][ C0] inet_shutdown+0x243/0x320 [ 286.535077][ C0] nvme_tcp_alloc_queue+0xb3b/0x2590 [nvme_tcp] [ 286.535709][ C0] ? do_raw_spin_lock+0x129/0x260 [ 286.536314][ C0] ? __pfx_nvme_tcp_alloc_queue+0x10/0x10 [nvme_tcp] [ 286.536996][ C0] ? do_raw_spin_unlock+0x54/0x1e0 [ 286.537550][ C0] ? _raw_spin_unlock+0x29/0x50 [ 286.538127][ C0] ? do_raw_spin_lock+0x129/0x260 [ 286.538664][ C0] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 286.539249][ C0] ? nvme_tcp_alloc_admin_queue+0xd5/0x340 [nvme_tcp] [ 286.539892][ C0] ? __wake_up+0x40/0x60 [ 286.540392][ C0] nvme_tcp_alloc_admin_queue+0xd5/0x340 [nvme_tcp] [ 286.541047][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.541589][ C0] nvme_tcp_setup_ctrl+0x8b/0x7a0 [nvme_tcp] [ 286.542254][ C0] ? _raw_spin_unlock_irqrestore+0x4c/0x60 [ 286.542887][ C0] ? __pfx_nvme_tcp_setup_ctrl+0x10/0x10 [nvme_tcp] [ 286.543568][ C0] ? trace_hardirqs_on+0x12/0x120 [ 286.544166][ C0] ? _raw_spin_unlock_irqrestore+0x35/0x60 [ 286.544792][ C0] ? nvme_change_ctrl_state+0x196/0x2e0 [nvme_core] [ 286.545477][ C0] nvme_tcp_create_ctrl+0x839/0xb90 [nvme_tcp] [ 286.546126][ C0] nvmf_dev_write+0x3db/0x7e0 [nvme_fabrics] [ 286.546775][ C0] ? rw_verify_area+0x69/0x520 [ 286.547334][ C0] vfs_write+0x218/0xe90 [ 286.547854][ C0] ? do_syscall_64+0x9f/0x190 [ 286.548408][ C0] ? trace_hardirqs_on_prepare+0xdb/0x120 [ 286.549037][ C0] ? syscall_exit_to_user_mode+0x93/0x280 [ 286.549659][ C0] ? __pfx_vfs_write+0x10/0x10 [ 286.550259][ C0] ? do_syscall_64+0x9f/0x190 [ 286.550840][ C0] ? syscall_exit_to_user_mode+0x8e/0x280 [ 286.551516][ C0] ? trace_hardirqs_on_prepare+0xdb/0x120 [ 286.552180][ C0] ? syscall_exit_to_user_mode+0x93/0x280 [ 286.552834][ C0] ? ksys_read+0xf5/0x1c0 [ 286.553386][ C0] ? __pfx_ksys_read+0x10/0x10 [ 286.553964][ C0] ksys_write+0xf5/0x1c0 [ 286.554499][ C0] ? __pfx_ksys_write+0x10/0x10 [ 286.555072][ C0] ? trace_hardirqs_on_prepare+0xdb/0x120 [ 286.555698][ C0] ? syscall_exit_to_user_mode+0x93/0x280 [ 286.556319][ C0] ? do_syscall_64+0x54/0x190 [ 286.556866][ C0] do_syscall_64+0x93/0x190 [ 286.557420][ C0] ? rcu_read_unlock+0x17/0x60 [ 286.557986][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.558526][ C0] ? lock_release+0x217/0x2c0 [ 286.559087][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.559659][ C0] ? count_memcg_events.constprop.0+0x4a/0x60 [ 286.560476][ C0] ? exc_page_fault+0x7a/0x110 [ 286.561064][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.561647][ C0] ? lock_release+0x217/0x2c0 [ 286.562257][ C0] ? do_user_addr_fault+0x171/0xa00 [ 286.562839][ C0] ? do_user_addr_fault+0x4a2/0xa00 [ 286.563453][ C0] ? irqentry_exit_to_user_mode+0x84/0x270 [ 286.564112][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.564677][ C0] ? irqentry_exit_to_user_mode+0x84/0x270 [ 286.565317][ C0] ? trace_hardirqs_on_prepare+0xdb/0x120 [ 286.565922][ C0] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 286.566542][ C0] RIP: 0033:0x7fe3c05e6504 [ 286.567102][ C0] Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d c5 8b 10 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 [ 286.568931][ C0] RSP: 002b:00007fff76444f58 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ 286.569807][ C0] RAX: ffffffffffffffda RBX: 000000003b40d930 RCX: 00007fe3c05e6504 [ 286.570621][ C0] RDX: 00000000000000cf RSI: 000000003b40d930 RDI: 0000000000000003 [ 286.571443][ C0] RBP: 0000000000000003 R08: 00000000000000cf R09: 000000003b40d930 [ 286.572246][ C0] R10: 0000000000000000 R11: 0000000000000202 R12: 000000003b40cd60 [ 286.573069][ C0] R13: 00000000000000cf R14: 00007fe3c07417f8 R15: 00007fe3c073502e [ 286.573886][ C0] </TASK> Closes: https://lore.kernel.org/linux-nvme/5hdonndzoqa265oq3bj6iarwtfk5dewxxjtbjvn5uqnwclpwt6@a2n6w3taxxex/ Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2025-04-30nvmet-tcp: select CONFIG_TLS from CONFIG_NVME_TARGET_TCP_TLSAlistair Francis
Ensure that TLS support is enabled in the kernel when CONFIG_NVME_TARGET_TCP_TLS is enabled. Without this the code compiles, but does not actually work unless something else enables CONFIG_TLS. Fixes: 675b453e0241 ("nvmet-tcp: enable TLS handshake upcall") Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2025-04-30nvme-tcp: select CONFIG_TLS from CONFIG_NVME_TCP_TLSAlistair Francis
Ensure that TLS support is enabled in the kernel when CONFIG_NVME_TCP_TLS is enabled. Without this the code compiles, but does not actually work unless something else enables CONFIG_TLS. Fixes: be8e82caa68 ("nvme-tcp: enable TLS handshake upcall") Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2025-04-30nvme-tcp: fix premature queue removal and I/O failoverMichael Liang
This patch addresses a data corruption issue observed in nvme-tcp during testing. In an NVMe native multipath setup, when an I/O timeout occurs, all inflight I/Os are canceled almost immediately after the kernel socket is shut down. These canceled I/Os are reported as host path errors, triggering a failover that succeeds on a different path. However, at this point, the original I/O may still be outstanding in the host's network transmission path (e.g., the NIC’s TX queue). From the user-space app's perspective, the buffer associated with the I/O is considered completed since they're acked on the different path and may be reused for new I/O requests. Because nvme-tcp enables zero-copy by default in the transmission path, this can lead to corrupted data being sent to the original target, ultimately causing data corruption. We can reproduce this data corruption by injecting delay on one path and triggering i/o timeout. To prevent this issue, this change ensures that all inflight transmissions are fully completed from host's perspective before returning from queue stop. To handle concurrent I/O timeout from multiple namespaces under the same controller, always wait in queue stop regardless of queue's state. This aligns with the behavior of queue stopping in other NVMe fabric transports. Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver") Signed-off-by: Michael Liang <mliang@purestorage.com> Reviewed-by: Mohamed Khalfella <mkhalfella@purestorage.com> Reviewed-by: Randy Jennings <randyj@purestorage.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2025-04-29nvme-pci: add quirks for WDC Blue SN550 15b7:5009Wentao Guan
Add two quirks for the WDC Blue SN550 (PCI ID 15b7:5009) based on user reports and hardware analysis: - NVME_QUIRK_NO_DEEPEST_PS: liaozw talked to me the problem and solved with nvme_core.default_ps_max_latency_us=0, so add the quirk. I also found some reports in the following link. - NVME_QUIRK_BROKEN_MSI: after get the lspci from Jack Rio. I think that the disk also have NVME_QUIRK_BROKEN_MSI. described in commit d5887dc6b6c0 ("nvme-pci: Add quirk for broken MSIs") as sean said in link which match the MSI 1/32 and MSI-X 17. Log: lspci -nn | grep -i memory 03:00.0 Non-Volatile memory controller [0108]: Sandisk Corp SanDisk Ultra 3D / WD PC SN530, IX SN530, Blue SN550 NVMe SSD (DRAM-less) [15b7:5009] (rev 01) lspci -v -d 15b7:5009 03:00.0 Non-Volatile memory controller: Sandisk Corp SanDisk Ultra 3D / WD PC SN530, IX SN530, Blue SN550 NVMe SSD (DRAM-less) (rev 01) (prog-if 02 [NVM Express]) Subsystem: Sandisk Corp WD Blue SN550 NVMe SSD Flags: bus master, fast devsel, latency 0, IRQ 35, IOMMU group 10 Memory at fe800000 (64-bit, non-prefetchable) [size=16K] Memory at fe804000 (64-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable- Count=1/32 Maskable- 64bit+ Capabilities: [b0] MSI-X: Enable+ Count=17 Masked- Capabilities: [c0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [150] Device Serial Number 00-00-00-00-00-00-00-00 Capabilities: [1b8] Latency Tolerance Reporting Capabilities: [300] Secondary PCI Express Capabilities: [900] L1 PM Substates Kernel driver in use: nvme dmesg | grep nvme [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.12.20-amd64-desktop-rolling root=UUID= ro splash quiet nvme_core.default_ps_max_latency_us=0 DEEPIN_GFXMODE= [ 0.059301] Kernel command line: BOOT_IMAGE=/vmlinuz-6.12.20-amd64-desktop-rolling root=UUID= ro splash quiet nvme_core.default_ps_max_latency_us=0 DEEPIN_GFXMODE= [ 0.542430] nvme nvme0: pci function 0000:03:00.0 [ 0.560426] nvme nvme0: allocated 32 MiB host memory buffer. [ 0.562491] nvme nvme0: 16/0/0 default/read/poll queues [ 0.567764] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 [ 6.388726] EXT4-fs (nvme0n1p7): mounted filesystem ro with ordered data mode. Quota mode: none. [ 6.893421] EXT4-fs (nvme0n1p7): re-mounted r/w. Quota mode: none. [ 7.125419] Adding 16777212k swap on /dev/nvme0n1p8. Priority:-2 extents:1 across:16777212k SS [ 7.157588] EXT4-fs (nvme0n1p6): mounted filesystem r/w with ordered data mode. Quota mode: none. [ 7.165021] EXT4-fs (nvme0n1p9): mounted filesystem r/w with ordered data mode. Quota mode: none. [ 8.036932] nvme nvme0: using unchecked data buffer [ 8.096023] block nvme0n1: No UUID available providing old NGUID Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d5887dc6b6c054d0da3cd053afc15b7be1f45ff6 Link: https://lore.kernel.org/all/20240422162822.3539156-1-sean.anderson@linux.dev/ Reported-by: liaozw <hedgehog-002@163.com> Closes: https://bbs.deepin.org.cn/post/286300 Reported-by: rugk <rugk+github@posteo.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=208123 Signed-off-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2025-04-29nvme-pci: add quirks for device 126f:1001Wentao Guan
This commit adds NVME_QUIRK_NO_DEEPEST_PS and NVME_QUIRK_BOGUS_NID for device [126f:1001]. It is similar to commit e89086c43f05 ("drivers/nvme: Add quirks for device 126f:2262") Diff is according the dmesg, use NVME_QUIRK_IGNORE_DEV_SUBNQN. dmesg | grep -i nvme0: nvme nvme0: pci function 0000:01:00.0 nvme nvme0: missing or invalid SUBNQN field. nvme nvme0: 12/0/0 default/read/poll queues Link:https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e89086c43f0500bc7c4ce225495b73b8ce234c1f Signed-off-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: WangYuli <wangyuli@uniontech.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2025-04-29nvme-pci: fix queue unquiesce check on slot_resetKeith Busch
A zero return means the reset was successfully scheduled. We don't want to unquiesce the queues while the reset_work is pending, as that will just flush out requeued requests to a failed completion. Fixes: 71a5bb153be104 ("nvme: ensure disabling pairs with unquiesce") Reported-by: Dhankaran Singh Ajravat <dhankaran@meta.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2025-04-29ublk: remove the check of ublk_need_req_ref() from __ublk_check_and_get_reqMing Lei
__ublk_check_and_get_req() is only called from ublk_check_and_get_req() and ublk_register_io_buf(), the same check has been covered in the two calling sites. So remove the check from __ublk_check_and_get_req(). Suggested-by: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250429022941.1718671-5-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-29ublk: enhance check for register/unregister io buffer commandMing Lei
The simple check of UBLK_IO_FLAG_OWNED_BY_SRV can avoid incorrect register/unregister io buffer easily, so check it before calling starting to register/un-register io buffer. Also only allow io buffer register/unregister uring_cmd in case of UBLK_F_SUPPORT_ZERO_COPY. Also mark argument 'ublk_queue *' of ublk_register_io_buf as const. Reviewed-by: Caleb Sander Mateos <csander@purestorage.com> Fixes: 1f6540e2aabb ("ublk: zc register/unregister bvec") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250429022941.1718671-4-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-29ublk: decouple zero copy from user copyMing Lei
UBLK_F_USER_COPY and UBLK_F_SUPPORT_ZERO_COPY are two different features, and shouldn't be coupled together. Commit 1f6540e2aabb ("ublk: zc register/unregister bvec") enables user copy automatically in case of UBLK_F_SUPPORT_ZERO_COPY, this way isn't correct. So decouple zero copy from user copy, and use independent helper to check each one. Fixes: 1f6540e2aabb ("ublk: zc register/unregister bvec") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250429022941.1718671-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-24ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmdMing Lei
ublk_cancel_cmd() calls io_uring_cmd_done() to complete uring_cmd, but we may have scheduled task work via io_uring_cmd_complete_in_task() for dispatching request, then kernel crash can be triggered. Fix it by not trying to canceling the command if ublk block request is started. Fixes: 216c8f5ef0f2 ("ublk: replace monitor with cancelable uring_cmd") Reported-by: Jared Holzman <jholzman@nvidia.com> Tested-by: Jared Holzman <jholzman@nvidia.com> Closes: https://lore.kernel.org/linux-block/d2179120-171b-47ba-b664-23242981ef19@nvidia.com/ Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250425013742.1079549-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-24ublk: call ublk_dispatch_req() for handling UBLK_U_IO_NEED_GET_DATAMing Lei
We call io_uring_cmd_complete_in_task() to schedule task_work for handling UBLK_U_IO_NEED_GET_DATA. This way is really not necessary because the current context is exactly the ublk queue context, so call ublk_dispatch_req() directly for handling UBLK_U_IO_NEED_GET_DATA. Fixes: 216c8f5ef0f2 ("ublk: replace monitor with cancelable uring_cmd") Tested-by: Jared Holzman <jholzman@nvidia.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250425013742.1079549-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-22nvmet: fix out-of-bounds access in nvmet_enable_portRichard Weinberger
When trying to enable a port that has no transport configured yet, nvmet_enable_port() uses NVMF_TRTYPE_MAX (255) to query the transports array, causing an out-of-bounds access: [ 106.058694] BUG: KASAN: global-out-of-bounds in nvmet_enable_port+0x42/0x1da [ 106.058719] Read of size 8 at addr ffffffff89dafa58 by task ln/632 [...] [ 106.076026] nvmet: transport type 255 not supported Since commit 200adac75888, NVMF_TRTYPE_MAX is the default state as configured by nvmet_ports_make(). Avoid this by checking for NVMF_TRTYPE_MAX before proceeding. Fixes: 200adac75888 ("nvme: Add PCI transport type") Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
2025-04-17Merge tag 'nvme-6.15-2025-04-17' of git://git.infradead.org/nvme into block-6.15Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.15 - fix scan failure for non-ANA multipath controllers (Hannes Reinecke) - fix multipath sysfs links creation for some cases (Hannes Reinecke) - PCIe endpoint fixes (Damien Le Moal) - use NULL instead of 0 in the auth code (Damien Le Moal)" * tag 'nvme-6.15-2025-04-17' of git://git.infradead.org/nvme: nvmet: pci-epf: cleanup link state management nvmet: pci-epf: clear CC and CSTS when disabling the controller nvmet: pci-epf: always fully initialize completion entries nvmet: auth: use NULL to clear a pointer in nvmet_auth_sq_free() nvme-multipath: sysfs links may not be created for devices nvme: fixup scan failure for non-ANA multipath controllers
2025-04-16Merge tag 'md-6.15-20250416' of ↵Jens Axboe
https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux into block-6.15 Pull MD fixes from Yu: "- fix raid10 missing discard IO accounting (Yu Kuai) - fix bitmap stats for bitmap file (Zheng Qixing) - fix oops while reading all member disks failed during check/repair (Meir Elisha)" * tag 'md-6.15-20250416' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux: md/raid1: Add check for missing source disk in process_checks() md/md-bitmap: fix stats collection for external bitmaps md/raid10: fix missing discard IO accounting
2025-04-16ublk: simplify aborting ublk requestMing Lei
Now ublk_abort_queue() is moved to ublk char device release handler, meantime our request queue is "quiesced" because either ->canceling was set from uring_cmd cancel function or all IOs are inflight and can't be completed by ublk server, things becomes easy much: - all uring_cmd are done, so we needn't to mark io as UBLK_IO_FLAG_ABORTED for handling completion from uring_cmd - ublk char device is closed, no one can hold IO request reference any more, so we can simply complete this request or requeue it for ublk_nosrv_should_reissue_outstanding. Reviewed-by: Uday Shankar <ushankar@purestorage.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250416035444.99569-8-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16ublk: remove __ublk_quiesce_dev()Ming Lei
Remove __ublk_quiesce_dev() and open code for updating device state as QUIESCED. We needn't to drain inflight requests in __ublk_quiesce_dev() any more, because all inflight requests are aborted in ublk char device release handler. Also we needn't to set ->canceling in __ublk_quiesce_dev() any more because it is done unconditionally now in ublk_ch_release(). Reviewed-by: Uday Shankar <ushankar@purestorage.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250416035444.99569-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16ublk: improve detection and handling of ublk server exitUday Shankar
There are currently two ways in which ublk server exit is detected by ublk_drv: 1. uring_cmd cancellation. If there are any outstanding uring_cmds which have not been completed to the ublk server when it exits, io_uring calls the uring_cmd callback with a special cancellation flag as the issuing task is exiting. 2. I/O timeout. This is needed in addition to the above to handle the "saturated queue" case, when all I/Os for a given queue are in the ublk server, and therefore there are no outstanding uring_cmds to cancel when the ublk server exits. There are a couple of issues with this approach: - It is complex and inelegant to have two methods to detect the same condition - The second method detects ublk server exit only after a long delay (~30s, the default timeout assigned by the block layer). This delays the nosrv behavior from kicking in and potential subsequent recovery of the device. The second issue is brought to light with the new test_generic_06 which will be added in following patch. It fails before this fix: selftests: ublk: test_generic_06.sh dev id is 0 dd: error writing '/dev/ublkb0': Input/output error 1+0 records in 0+0 records out 0 bytes copied, 30.0611 s, 0.0 kB/s DEAD dd took 31 seconds to exit (>= 5s tolerance)! generic_06 : [FAIL] Fix this by instead detecting and handling ublk server exit in the character file release callback. This has several advantages: - This one place can handle both saturated and unsaturated queues. Thus, it replaces both preexisting methods of detecting ublk server exit. - It runs quickly on ublk server exit - there is no 30s delay. - It starts the process of removing task references in ublk_drv. This is needed if we want to relax restrictions in the driver like letting only one thread serve each queue There is also the disadvantage that the character file release callback can also be triggered by intentional close of the file, which is a significant behavior change. Preexisting ublk servers (libublksrv) are dependent on the ability to open/close the file multiple times. To address this, only transition to a nosrv state if the file is released while the ublk device is live. This allows for programs to open/close the file multiple times during setup. It is still a behavior change if a ublk server decides to close/reopen the file while the device is LIVE (i.e. while it is responsible for serving I/O), but that would be highly unusual. This behavior is in line with what is done by FUSE, which is very similar to ublk in that a userspace daemon is providing services traditionally provided by the kernel. With this change in, the new test (and all other selftests, and all ublksrv tests) pass: selftests: ublk: test_generic_06.sh dev id is 0 dd: error writing '/dev/ublkb0': Input/output error 1+0 records in 0+0 records out 0 bytes copied, 0.0376731 s, 0.0 kB/s DEAD generic_04 : [PASS] Signed-off-by: Uday Shankar <ushankar@purestorage.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250416035444.99569-6-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16ublk: move device reset into ublk_ch_release()Ming Lei
ublk_ch_release() is called after ublk char device is closed, when all uring_cmd are done, so it is perfect fine to move ublk device reset to ublk_ch_release() from ublk_ctrl_start_recovery(). This way can avoid to grab the exiting daemon task_struct too long. However, reset of the following ublk IO flags has to be moved until ublk io_uring queues are ready: - ubq->canceling For requeuing IO in case of ublk_nosrv_dev_should_queue_io() before device is recovered - ubq->fail_io For failing IO in case of UBLK_F_USER_RECOVERY_FAIL_IO before device is recovered - ublk_io->flags For preventing using io->cmd With this way, recovery is simplified a lot. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250416035444.99569-5-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16ublk: rely on ->canceling for dealing with ublk_nosrv_dev_should_queue_ioMing Lei
Now ublk deals with ublk_nosrv_dev_should_queue_io() by keeping request queue as quiesced. This way is fragile because queue quiesce crosses syscalls or process contexts. Switch to rely on ubq->canceling for dealing with ublk_nosrv_dev_should_queue_io(), because it has been used for this purpose during io_uring context exiting, and it can be reused before recovering too. In ublk_queue_rq(), the request will be added to requeue list without kicking off requeue in case of ubq->canceling, and finally requests added in requeue list will be dispatched from either ublk_stop_dev() or ublk_ctrl_end_recovery(). Meantime we have to move reset of ubq->canceling from ublk_ctrl_start_recovery() to ublk_ctrl_end_recovery(), when IO handling can be recovered completely. Then blk_mq_quiesce_queue() and blk_mq_unquiesce_queue() are always used in same context. Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Uday Shankar <ushankar@purestorage.com> Link: https://lore.kernel.org/r/20250416035444.99569-4-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16ublk: add ublk_force_abort_dev()Ming Lei
Add ublk_force_abort_dev() for handling ublk_nosrv_dev_should_queue_io() in ublk_stop_dev(). Then queue quiesce and unquiesce can be paired in single function. Meantime not change device state to QUIESCED any more, since the disk is going to be removed soon. Reviewed-by: Uday Shankar <ushankar@purestorage.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250416035444.99569-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16ublk: properly serialize all FETCH_REQsUday Shankar
Most uring_cmds issued against ublk character devices are serialized because each command affects only one queue, and there is an early check which only allows a single task (the queue's ubq_daemon) to issue uring_cmds against that queue. However, this mechanism does not work for FETCH_REQs, since they are expected before ubq_daemon is set. Since FETCH_REQs are only used at initialization and not in the fast path, serialize them using the per-ublk-device mutex. This fixes a number of data races that were previously possible if a badly behaved ublk server decided to issue multiple FETCH_REQs against the same qid/tag concurrently. Reported-by: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Uday Shankar <ushankar@purestorage.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250416035444.99569-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16md/raid1: Add check for missing source disk in process_checks()Meir Elisha
During recovery/check operations, the process_checks function loops through available disks to find a 'primary' source with successfully read data. If no suitable source disk is found after checking all possibilities, the 'primary' index will reach conf->raid_disks * 2. Add an explicit check for this condition after the loop. If no source disk was found, print an error message and return early to prevent further processing without a valid primary source. Link: https://lore.kernel.org/linux-raid/20250408143808.1026534-1-meir.elisha@volumez.com Signed-off-by: Meir Elisha <meir.elisha@volumez.com> Suggested-and-reviewed-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com>
2025-04-16nvmet: pci-epf: cleanup link state managementDamien Le Moal
Since the link_up boolean field of struct nvmet_pci_epf_ctrl is always set to true when nvmet_pci_epf_start_ctrl() is called, assign true to this field in nvmet_pci_epf_start_ctrl(). Conversely, since this field is set to false when nvmet_pci_epf_stop_ctrl() is called, set this field to false directly inside that function. While at it, also add information messages to notify the user of the PCI link state changes to help troubleshoot any link stability issues without needing to enable debug messages. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2025-04-16nvmet: pci-epf: clear CC and CSTS when disabling the controllerDamien Le Moal
When a host shuts down the controller when shutting down but does so without first disabling the controller, the enable bit remains set in the controller configuration register. When the host restarts and attempts to enable the controller again, the nvmet_pci_epf_poll_cc_work() function is unable to detect the change from 0 to 1 of the enable bit, and thus the controller is not enabled again, which result in a device scan timeout on the host. This problem also occurs if the host shuts down uncleanly or if the PCIe link goes down: as the CC.EN value is not reset, the controller is not enabled again when the host restarts. Fix this by introducing the function nvmet_pci_epf_clear_ctrl_config() to clear the CC and CSTS registers of the controller when the PCIe link is lost (nvmet_pci_epf_stop_ctrl() function), or when starting the controller fails (nvmet_pci_epf_enable_ctrl() fails). Also use this function in nvmet_pci_epf_init_bar() to simplify the initialization of the CC and CSTS registers. Furthermore, modify the function nvmet_pci_epf_disable_ctrl() to clear the CC.EN bit and write this updated value to the BAR register when the controller is shutdown by the host, to ensure that upon restart, we can detect the host setting CC.EN. Fixes: 0faa0fe6f90e ("nvmet: New NVMe PCI endpoint function target driver") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2025-04-16nvmet: pci-epf: always fully initialize completion entriesDamien Le Moal
For a command that is normally processed through the command request execute() function, the completion entry for the command is initialized by __nvmet_req_complete() and nvmet_pci_epf_cq_work() only needs to set the status field and the phase of the completion entry before posting the entry to the completion queue. However, for commands that are failed due to an internal error (e.g. the command data buffer allocation fails), the command request execute() function is not called and __nvmet_req_complete() is never executed for the command, leaving the command completion entry uninitialized. For such command failed before calling req->execute(), the host ends up seeing completion entries with an invalid submission queue ID and command ID. Avoid such issue by always fully initilizing a command completion entry in nvmet_pci_epf_cq_work(), setting the entry submission queue head, ID and command ID. Fixes: 0faa0fe6f90e ("nvmet: New NVMe PCI endpoint function target driver") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2025-04-16nvmet: auth: use NULL to clear a pointer in nvmet_auth_sq_free()Damien Le Moal
When compiling with C=1, the following sparse warning is generated: auth.c:243:23: warning: Using plain integer as NULL pointer Avoid this warning by using NULL to instead of 0 to set the sq tls_key pointer. Fixes: fa2e0f8bbc68 ("nvmet-tcp: support secure channel concatenation") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2025-04-16nvme-multipath: sysfs links may not be created for devicesHannes Reinecke
When rapidly rescanning for new namespaces nvme_mpath_add_sysfs_link() may be called for a block device not added to sysfs. But NVME_NS_SYSFS_ATTR_LINK had already been set, so when checking this device a second time we will fail to create the link. Fix this by exchanging the order of the block device check and the NVME_NS_SYSFS_ATTR_LINK bit check. Fixes: 4dbd2b2ebe4c ("nvme-multipath: Add visibility for round-robin io-policy") Signed-off-by: Hannes Reinecke <hare@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>** Reviewed-by: Nilay Shroff <nilay@linux.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2025-04-16nvme: fixup scan failure for non-ANA multipath controllersHannes Reinecke
Commit 62baf70c3274 caused the ANA log page to be re-read, even on controllers that do not support ANA. While this should generally harmless, some controllers hang on the unsupported log page and never finish probing. Fixes: 62baf70c3274 ("nvme: re-read ANA log page after ns scan completes") Signed-off-by: Hannes Reinecke <hare@kernel.org> Tested-by: Srikanth Aithal <sraithal@amd.com> [hch: more detailed commit message] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2025-04-15ublk: don't suggest CONFIG_BLK_DEV_UBLK=YCaleb Sander Mateos
The CONFIG_BLK_DEV_UBLK help text suggests setting the config option to Y so task_work_add() can be used to dispatch I/O, improving performance. However, this mechanism was removed in commit 29dc5d06613f2 ("ublk: kill queuing request by task_work_add"). So remove this paragraph from the config help text. Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Uday Shankar <ushankar@purestorage.com> Link: https://lore.kernel.org/r/20250416004111.3242817-1-csander@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-15loop: stop using vfs_iter_{read,write} for buffered I/OChristoph Hellwig
vfs_iter_{read,write} always perform direct I/O when the file has the O_DIRECT flag set, which breaks disabling direct I/O using the LOOP_SET_STATUS / LOOP_SET_STATUS64 ioctls. This was recenly reported as a regression, but as far as I can tell was only uncovered by better checking for block sizes and has been around since the direct I/O support was added. Fix this by using the existing aio code that calls the raw read/write iter methods instead. Note that despite the comments there is no need for block drivers to ever call flush_dcache_page themselves, and the call is a left-over from prehistoric times. Fixes: ab1cb278bc70 ("block: loop: introduce ioctl command of LOOP_SET_DIRECT_IO") Reported-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Tested-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20250409130940.3685677-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-15loop: LOOP_SET_FD: send uevents for partitionsThomas Weißschuh
Remove the suppression of the uevents before scanning for partitions. The partitions inherit their suppression settings from their parent device, which lead to the uevents being dropped. This is similar to the same changes for LOOP_CONFIGURE done in commit bb430b694226 ("loop: LOOP_CONFIGURE: send uevents for partitions"). Fixes: 498ef5c777d9 ("loop: suppress uevents while reconfiguring the device") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20250415-loop-uevent-changed-v3-1-60ff69ac6088@linutronix.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-15loop: properly send KOBJ_CHANGED uevent for disk deviceThomas Weißschuh
The original commit message and the wording "uncork" in the code comment indicate that it is expected that the suppressed event instances are automatically sent after unsuppressing. This is not the case, instead they are discarded. In effect this means that no "changed" events are emitted on the device itself by default. While each discovered partition does trigger a changed event on the device, devices without partitions don't have any event emitted. This makes udev miss the device creation and prompted workarounds in userspace. See the linked util-linux/losetup bug. Explicitly emit the events and drop the confusingly worded comments. Link: https://github.com/util-linux/util-linux/issues/2434 Fixes: 498ef5c777d9 ("loop: suppress uevents while reconfiguring the device") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Link: https://lore.kernel.org/r/20250415-loop-uevent-changed-v2-1-0c4e6a923b2a@linutronix.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-15loop: aio inherit the ioprio of original requestYunlong Xing
Set cmd->iocb.ki_ioprio to the ioprio of loop device's request. The purpose is to inherit the original request ioprio in the aio flow. Signed-off-by: Yunlong Xing <yunlong.xing@unisoc.com> Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250414030159.501180-1-yunlong.xing@unisoc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-12Merge tag 'pwm/for-6.15-rc2-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux Pull pwm fixes from Uwe Kleine-König: "A set of fixes for pwm core and various drivers The first three patches handle clk_get_rate() returning 0 (which might happen for example if the CCF is disabled). The first of these was found because this triggered a warning with clang, the two others by looking for similar issues in other drivers. The remaining three fixes address issues in the new waveform pwm API. Now that I worked on this a bit more, the finer details and corner cases are better understood and the code is fixed accordingly" * tag 'pwm/for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: pwm: axi-pwmgen: Let .round_waveform_tohw() signal when request was rounded up pwm: stm32: Search an appropriate duty_cycle if period cannot be modified pwm: Let pwm_set_waveform() succeed even if lowlevel driver rounded up pwm: fsl-ftm: Handle clk_get_rate() returning 0 pwm: rcar: Improve register calculation pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config()
2025-04-11Merge tag 'pci-v6.15-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci fix from Bjorn Helgaas: - Run quirk_huawei_pcie_sva() before arm_smmu_probe_device(), which depends on the quirk, to avoid IOMMU initialization failures (Zhangfei Gao) * tag 'pci-v6.15-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI: Run quirk_huawei_pcie_sva() before arm_smmu_probe_device()
2025-04-11PCI: Run quirk_huawei_pcie_sva() before arm_smmu_probe_device()Zhangfei Gao
quirk_huawei_pcie_sva() sets properties needed by arm_smmu_probe_device(), but bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path") changed the iommu_probe_device() flow so arm_smmu_probe_device() is now invoked before the quirk, leading to failures like this: reg-dummy reg-dummy: late IOMMU probe at driver bind, something fishy here! WARNING: CPU: 0 PID: 1 at drivers/iommu/iommu.c:449 __iommu_probe_device+0x140/0x570 RIP: 0010:__iommu_probe_device+0x140/0x570 The SR-IOV enumeration ordering changes like this: pci_iov_add_virtfn pci_device_add pci_fixup_device(pci_fixup_header) <-- device_add bus_notify iommu_bus_notifier + iommu_probe_device + arm_smmu_probe_device pci_bus_add_device pci_fixup_device(pci_fixup_final) <-- device_attach driver_probe_device really_probe pci_dma_configure acpi_dma_configure_id - iommu_probe_device - arm_smmu_probe_device The non-SR-IOV case is similar in that pci_device_add() is called from pci_scan_single_device() in the generic enumeration path and pci_bus_add_device() is called later, after all host bridges have been enumerated. Declare quirk_huawei_pcie_sva() as a header fixup to ensure that it happens before arm_smmu_probe_device(). Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path") Reported-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Closes: https://lore.kernel.org/all/SJ1PR11MB61295DE21A1184AEE0786E25B9D22@SJ1PR11MB6129.namprd11.prod.outlook.com/ Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> [bhelgaas: commit log, add failure info and reporter] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20250317011352.5806-1-zhangfei.gao@linaro.org
2025-04-11Merge tag 'spi-fix-v6.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A couple of cleanups for the error handling in the Freescale drivers" * tag 'spi-fix-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fsl-spi: Remove redundant probe error message spi: fsl-qspi: Fix double cleanup in probe error path
2025-04-11Merge tag 'ata-6.15-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux Pull ata fixes from Damien Le Moal: - Fix missing error checks during controller probe in the sata_sx4 driver (Wentao) - Fix missing error checks during controller probe in the pata_pxa driver (Henry) * tag 'ata-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: sata_sx4: Add error handling in pdc20621_i2c_read() ata: pata_pxa: Fix potential NULL pointer dereference in pxa_ata_probe()
2025-04-11Merge tag 'block-6.15-20250411' of git://git.kernel.dk/linuxLinus Torvalds
Pull more block fixes from Jens Axboe: "Apparently my internal clock was off, or perhaps it was just wishful thinking, but I sent out block fixes yesterday as my brain assumed it was Friday. Subsequently, that missed the NVMe fixes that should go into this weeks release as well. Hence, here's a followup with those, and another simple fix. - NVMe pull request via Christoph: - nvmet fc/fcloop refcounting fixes (Daniel Wagner) - fix missed namespace/ANA scans (Hannes Reinecke) - fix a use after free in the new TCP netns support (Kuniyuki Iwashima) - fix a NULL instead of false review in multipath (Uday Shankar) - Use strscpy() for null_blk disk name copy" * tag 'block-6.15-20250411' of git://git.kernel.dk/linux: null_blk: Use strscpy() instead of strscpy_pad() in null_add_dev() nvmet-fc: put ref when assoc->del_work is already scheduled nvmet-fc: take tgtport reference only once nvmet-fc: update tgtport ref per assoc nvmet-fc: inline nvmet_fc_free_hostport nvmet-fc: inline nvmet_fc_delete_assoc nvmet-fcloop: add ref counting to lport nvmet-fcloop: replace kref with refcount nvmet-fcloop: swap list_add_tail arguments nvme-tcp: fix use-after-free of netns by kernel TCP socket. nvme: multipath: fix return value of nvme_available_path nvme: re-read ANA log page after ns scan completes nvme: requeue namespace scan on missed AENs
2025-04-11Merge tag 'iommu-fixes-v6.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux Pull iommu fixes from Joerg Roedel: - Fix two crashes, one in core code and a NULL-ptr dereference in the Mediatek IOMMU driver - Dma_ops cleanup fix for core code - Two fixes for Intel VT-d driver: - Fix posted MSI issue when users change cpu affinity - Remove invalid set_dma_ops() call in the iommu driver - Warning fix for Tegra IOMMU driver - Suspend/Resume fix for Exynos IOMMU driver - Probe failure fix for Renesas IOMMU driver - Cosmetic fix * tag 'iommu-fixes-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent() iommu: remove unneeded semicolon iommu/mediatek: Fix NULL pointer deference in mtk_iommu_device_group iommu/exynos: Fix suspend/resume with IDENTITY domain iommu/ipmmu-vmsa: Register in a sensible order iommu: Clear iommu-dma ops on cleanup iommu/vt-d: Remove an unnecessary call set_dma_ops() iommu/vt-d: Wire up irq_ack() to irq_move_irq() for posted MSIs iommu: Fix crash in report_iommu_fault()
2025-04-11Merge tag 'acpi-6.15-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix a recent regression in the ACPI button driver, add quirks related to EC wakeups from suspend-to-idle and fix coding mistakes related to the usage of sizeof() in the PPTT parser code: Summary: - Add suspend-to-idle EC wakeup quirks for Lenovo Go S (Mario Limonciello) - Prevent ACPI button from sending spurions KEY_POWER events to user space in some cases after a recent update (Mario Limonciello) - Compute the size of a structure instead of the size of a pointer in two places in the PPTT parser code (Jean-Marc Eurin)" * tag 'acpi-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI PPTT: Fix coding mistakes in a couple of sizeof() calls ACPI: EC: Set ec_no_wakeup for Lenovo Go S ACPI: button: Only send `KEY_POWER` for `ACPI_BUTTON_NOTIFY_STATUS`
2025-04-11Merge tag 's390-6.15-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: "Note that besides two bug fixes this includes three commits for IBM z17, which was announced this week. - Add IBM z17 bits: - Setup elf_platform for new machine types - Allow to compile the kernel with z17 optimizations - Add new performance counters - Fix mismatch between indicator bits and queue indexes in virtio CCW code - Fix double free in pmu setup error path" * tag 's390-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cpumf: Fix double free on error in cpumf_pmu_event_init() s390/cpumf: Update CPU Measurement facility extended counter set support s390: Allow to compile with z17 optimizations s390: Add z17 elf platform s390/virtio_ccw: Don't allocate/assign airqs for non-existing queues
2025-04-11Merge branches 'acpi-ec' and 'acpi-button'Rafael J. Wysocki
Merge updates of the ACPI EC and button drivers for 6.15-rc2: - Add suspend-to-idle EC wakeup quirks for Lenovo Go S (Mario Limonciello). - Prevent ACPI button from sending spurions KEY_POWER events to user space in some cases after a recent update (Mario Limonciello). * acpi-ec: ACPI: EC: Set ec_no_wakeup for Lenovo Go S * acpi-button: ACPI: button: Only send `KEY_POWER` for `ACPI_BUTTON_NOTIFY_STATUS`
2025-04-11null_blk: Use strscpy() instead of strscpy_pad() in null_add_dev()Thorsten Blum
blk_mq_alloc_disk() already zero-initializes the destination buffer, making strscpy() sufficient for safely copying the disk's name. The additional NUL-padding performed by strscpy_pad() is unnecessary. If the destination buffer has a fixed length, strscpy() automatically determines its size using sizeof() when the argument is omitted. This makes the explicit size argument unnecessary. The source string is also NUL-terminated and meets the __must_be_cstr() requirement of strscpy(). No functional changes intended. Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250410154727.883207-1-thorsten.blum@linux.dev Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-11iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent()Nicolin Chen
Two WARNINGs are observed when SMMU driver rolls back upon failure: arm-smmu-v3.9.auto: Failed to register iommu arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22 ------------[ cut here ]------------ WARNING: CPU: 5 PID: 1 at kernel/dma/mapping.c:74 dmam_free_coherent+0xc0/0xd8 Call trace: dmam_free_coherent+0xc0/0xd8 (P) tegra241_vintf_free_lvcmdq+0x74/0x188 tegra241_cmdqv_remove_vintf+0x60/0x148 tegra241_cmdqv_remove+0x48/0xc8 arm_smmu_impl_remove+0x28/0x60 devm_action_release+0x1c/0x40 ------------[ cut here ]------------ 128 pages are still in use! WARNING: CPU: 16 PID: 1 at mm/page_alloc.c:6902 free_contig_range+0x18c/0x1c8 Call trace: free_contig_range+0x18c/0x1c8 (P) cma_release+0x154/0x2f0 dma_free_contiguous+0x38/0xa0 dma_direct_free+0x10c/0x248 dma_free_attrs+0x100/0x290 dmam_free_coherent+0x78/0xd8 tegra241_vintf_free_lvcmdq+0x74/0x160 tegra241_cmdqv_remove+0x98/0x198 arm_smmu_impl_remove+0x28/0x60 devm_action_release+0x1c/0x40 This is because the LVCMDQ queue memory are managed by devres, while that dmam_free_coherent() is called in the context of devm_action_release(). Jason pointed out that "arm_smmu_impl_probe() has mis-ordered the devres callbacks if ops->device_remove() is going to be manually freeing things that probe allocated": https://lore.kernel.org/linux-iommu/20250407174408.GB1722458@nvidia.com/ In fact, tegra241_cmdqv_init_structures() only allocates memory resources which means any failure that it generates would be similar to -ENOMEM, so there is no point in having that "falling back to standard SMMU" routine, as the standard SMMU would likely fail to allocate memory too. Remove the unwind part in tegra241_cmdqv_init_structures(), and return a proper error code to ask SMMU driver to call tegra241_cmdqv_remove() via impl_ops->device_remove(). Then, drop tegra241_vintf_free_lvcmdq() since devres will take care of that. Fixes: 483e0bd8883a ("iommu/tegra241-cmdqv: Do not allocate vcmdq until dma_set_mask_and_coherent") Cc: stable@vger.kernel.org Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20250407201908.172225-1-nicolinc@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
generated by cgit (git 2.34.1) at 2025-09-09 08:58:25 +0000