summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-08-09usbnet: ipheth: fix carrier detection in modes 1 and 4Foster Snowhill
Apart from the standard "configurations", "interfaces" and "alternate interface settings" in USB, iOS devices also have a notion of "modes". In different modes, the device exposes a different set of available configurations. Depending on the iOS version, and depending on the current mode, the length and contents of the carrier state control message differs: * 1 byte (seen on iOS 4.2.1, 8.4): * 03: carrier off (mode 0) * 04: carrier on (mode 0) * 3 bytes (seen on iOS 10.3.4, 15.7.6): * 03 03 03: carrier off (mode 0) * 04 04 03: carrier on (mode 0) * 4 bytes (seen on iOS 16.5, 17.6): * 03 03 03 00: carrier off (mode 0) * 04 03 03 00: carrier off (mode 1) * 06 03 03 00: carrier off (mode 4) * 04 04 03 04: carrier on (mode 0 and 1) * 06 04 03 04: carrier on (mode 4) Before this change, the driver always used the first byte of the response to determine carrier state. From this larger sample, the first byte seems to indicate the number of available USB configurations in the current mode (with the exception of the default mode 0), and in some cases (namely mode 1 and 4) does not correlate with the carrier state. Previous logic erroneously counted `04 03 03 00` as "carrier on" and `06 04 03 04` as "carrier off" on iOS versions that support mode 1 and mode 4 respectively. Only modes 0, 1 and 4 expose the USB Ethernet interfaces necessary for the ipheth driver. Check the second byte of the control message where possible, and fall back to checking the first byte on older iOS versions. Signed-off-by: Foster Snowhill <forst@pen.gy> Tested-by: Georgi Valkov <gvalkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09usbnet: ipheth: do not stop RX on failing RX callbackFoster Snowhill
RX callbacks can fail for multiple reasons: * Payload too short * Payload formatted incorrecly (e.g. bad NCM framing) * Lack of memory None of these should cause the driver to seize up. Make such failures non-critical and continue processing further incoming URBs. Signed-off-by: Foster Snowhill <forst@pen.gy> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09usbnet: ipheth: drop RX URBs with no payloadFoster Snowhill
On iPhone 15 Pro Max one can observe periodic URBs with no payload on the "bulk in" (RX) endpoint. These don't seem to do anything meaningful. Reproduced on iOS 17.5.1 and 17.6. This behaviour isn't observed on iPhone 11 on the same iOS version. The nature of these zero-length URBs is so far unknown. Drop RX URBs with no payload. Signed-off-by: Foster Snowhill <forst@pen.gy> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09usbnet: ipheth: remove extraneous rx URB length checkFoster Snowhill
Rx URB length was already checked in ipheth_rcvbulk_callback_legacy() and ipheth_rcvbulk_callback_ncm(), depending on the current mode. The check in ipheth_rcvbulk_callback() was thus mostly a duplicate. The only place in ipheth_rcvbulk_callback() where we care about the URB length is for the initial control frame. These frames are always 4 bytes long. This has been checked as far back as iOS 4.2.1 on iPhone 3G. Remove the extraneous URB length check. For control frames, check for the specific 4-byte length instead. Signed-off-by: Foster Snowhill <forst@pen.gy> Tested-by: Georgi Valkov <gvalkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09usbnet: ipheth: race between ipheth_close and error handlingOliver Neukum
ipheth_sndbulk_callback() can submit carrier_work as a part of its error handling. That means that the driver must make sure that the work is cancelled after it has made sure that no more URB can terminate with an error condition. Hence the order of actions in ipheth_close() needs to be inverted. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Foster Snowhill <forst@pen.gy> Tested-by: Georgi Valkov <gvalkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09Merge tag 'drm-intel-fixes-2024-08-08' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes - correct dual pps handling for MTL_PCH+ [display] (Dnyaneshwar Bhadane) - Adjust vma offset for framebuffer mmap offset [gem] (Andi Shyti) - Fix Virtual Memory mapping boundaries calculation [gem] (Andi Shyti) - Allow evicting to use the requested placement (David Gow) - Attempt to get pages without eviction first (David Gow) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tursulin@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZrSFpj20b1LbBhCJ@linux
2024-08-09Merge tag 'drm-xe-fixes-2024-08-08' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes - Fix off-by-one when processing RTP rules (Lucas) - Use dma_fence_chain_free in chain fence unused as a sync (Brost) - Fix PL1 disable flow in xe_hwmon_power_max_write (Karthik) - Take ref to VM in delayed dump snapshot (Brost) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZrUGgVrgTJ_vF2PS@intel.com
2024-08-09Merge tag 'amd-drm-fixes-6.11-2024-08-08' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.11-2024-08-08: amdgpu: - DMCUB fix - Fix DET programming on some DCNs - DCC fixes - DCN 4.0.1 fixes - SMU 14.0.x update - MMHUB fix - DCN 3.1.4 fix - GC 12.0 fixes - Fix soft recovery error propogation - SDMA 7.0 fixes - DSC fix drm buddy: - Add start address to trim function Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240808161134.1227671-1-alexander.deucher@amd.com
2024-08-09Merge tag 'drm-misc-fixes-2024-08-08' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes A fix for drm/client to prevent a null pointer dereference, a fix for a double-free in drm/bridge-connector, a fix for a gem shmem test, and a fix for async flips updates. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240808-debonair-smoky-mustang-8b6b3f@houat
2024-08-08Merge tag 'net-6.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth. Current release - regressions: - eth: bnxt_en: fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() on older chips Current release - new code bugs: - ethtool: fix off-by-one error / kdoc contradicting the code for max RSS context IDs - Bluetooth: hci_qca: - QCA6390: fix support on non-DT platforms - QCA6390: don't call pwrseq_power_off() twice - fix a NULL-pointer derefence at shutdown - eth: ice: fix incorrect assigns of FEC counters Previous releases - regressions: - mptcp: fix handling endpoints with both 'signal' and 'subflow' flags set - virtio-net: fix changing ring count when vq IRQ coalescing not supported - eth: gve: fix use of netif_carrier_ok() during reconfig / reset Previous releases - always broken: - eth: idpf: fix bugs in queue re-allocation on reconfig / reset - ethtool: fix context creation with no parameters Misc: - linkwatch: use system_unbound_wq to ease RTNL contention" * tag 'net-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits) net: dsa: microchip: disable EEE for KSZ8567/KSZ9567/KSZ9896/KSZ9897. ethtool: Fix context creation with no parameters net: ethtool: fix off-by-one error in max RSS context IDs net: pse-pd: tps23881: include missing bitfield.h header net: fec: Stop PPS on driver remove net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities l2tp: fix lockdep splat net: stmmac: dwmac4: fix PCS duplex mode decode idpf: fix UAFs when destroying the queues idpf: fix memleak in vport interrupt configuration idpf: fix memory leaks and crashes while performing a soft reset bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register() net/smc: add the max value of fallback reason count Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitor Bluetooth: l2cap: always unlock channel in l2cap_conless_channel() Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdown Bluetooth: hci_qca: fix QCA6390 support on non-DT platforms Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390 ice: Fix incorrect assigns of FEC counts ...
2024-08-08media: Revert "media: dvb-usb: Fix unexpected infinite loop in ↵Sean Young
dvb_usb_read_remote_control()" This reverts commit 2052138b7da52ad5ccaf74f736d00f39a1c9198c. This breaks the TeVii s480 dual DVB-S2 S660. The device has a bulk in endpoint but no corresponding out endpoint, so the device does not pass the "has both receive and send bulk endpoint" test. Seemingly this device does not use dvb_usb_generic_rw() so I have tried removing the generic_bulk_ctrl_endpoint entry, but this resulted in different problems. As we have no explanation yet, revert. $ dmesg | grep -i -e dvb -e dw21 -e usb\ 4 [ 0.999122] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.023123] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.130247] usb 1-1: New USB device found, idVendor=9022, idProduct=d482, +bcdDevice= 0.01 [ 1.130257] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.152323] usb 4-1: New USB device found, idVendor=9022, idProduct=d481, +bcdDevice= 0.01 [ 1.152329] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.701033] dvb-usb: found a 'TeVii S480.2 USB' in cold state, will try to +load a firmware [ 6.701178] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw' [ 6.701179] dw2102: start downloading DW210X firmware [ 6.703715] dvb-usb: found a 'Microsoft Xbox One Digital TV Tuner' in cold +state, will try to load a firmware [ 6.703974] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [ 6.756432] usb 1-1: USB disconnect, device number 2 [ 6.862119] dvb-usb: found a 'TeVii S480.2 USB' in warm state. [ 6.862194] dvb-usb: TeVii S480.2 USB error while loading driver (-22) [ 6.862209] dvb-usb: found a 'TeVii S480.1 USB' in cold state, will try to +load a firmware [ 6.862244] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw' [ 6.862245] dw2102: start downloading DW210X firmware [ 6.914811] usb 4-1: USB disconnect, device number 2 [ 7.014131] dvb-usb: found a 'TeVii S480.1 USB' in warm state. [ 7.014487] dvb-usb: TeVii S480.1 USB error while loading driver (-22) [ 7.014538] usbcore: registered new interface driver dw2102 Closes: https://lore.kernel.org/stable/20240801165146.38991f60@mir/ Fixes: 2052138b7da5 ("media: dvb-usb: Fix unexpected infinite loop in dvb_usb_read_remote_control()") Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-08-08drm/xe: Take ref to VM in delayed snapshotMatthew Brost
Kernel BO's don't take a ref to the VM, we need the VM for the delayed snapshot, so take a ref to the VM in delayed snapshot. v2: - Check for lrc_bo before taking a VM ref (CI) - Check lrc_bo->vm before taking / dropping a VM ref (CI) - Drop VM in xe_lrc_snapshot_free v5: - Fix commit message wording (Johnathan) Fixes: 47058633d9c5 ("drm/xe: Move lrc snapshot capturing to xe_lrc.c") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240801154118.2547543-2-matthew.brost@intel.com (cherry picked from commit c3bc97d2f102ddd5a8341eeb2dbae2a3e98bb46a) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-08drm/xe/hwmon: Fix PL1 disable flow in xe_hwmon_power_max_writeKarthik Poosa
In xe_hwmon_power_max_write, for PL1 disable supported case, instead of returning after PL1 disable, PL1 enable path was also being run. Fixed it by returning after disable. v2: Correct typo and grammar in commit message. (Jonathan) Signed-off-by: Karthik Poosa <karthik.poosa@intel.com> Fixes: fef6dd12b45a ("drm/xe/hwmon: Protect hwmon rw attributes with hwmon_lock") Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240801112424.1841766-1-karthik.poosa@intel.com (cherry picked from commit 146458645e505f5eac498759bcd865cf7c0dfd9a) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-08drm/xe: Use dma_fence_chain_free in chain fence unused as a syncMatthew Brost
A chain fence is uninitialized if not installed in a drm sync obj. Thus if xe_sync_entry_cleanup is called and sync->chain_fence is non-NULL the proper cleanup is dma_fence_chain_free rather than a dma-fence put. Reported-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2411 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2261 Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240727012216.2118276-1-matthew.brost@intel.com (cherry picked from commit 7f7a2da3bf8bc0e0f6c239af495b7050056e889c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-08drm/xe/rtp: Fix off-by-one when processing rulesLucas De Marchi
Gustavo noticed an odd "+ 2" in rtp_mark_active() while processing rtp rules and pointed that it should be "+ 1". In fact, while processing entries without actions (OOB workarounds), if the WA is activated and has OR rules, it will also inadvertently activate the very next workaround. Test in a LNL B0 platform by moving 18024947630 on top of 16020292621, makes the latter become active: $ cat /sys/kernel/debug/dri/0/gt0/workarounds ... OOB Workarounds 18024947630 16020292621 14018094691 16022287689 13011645652 22019338487_display In future a kunit test will be added to cover the rtp checks for entries without actions. Fixes: fe19328b900c ("drm/xe/rtp: Add support for entries with no action") Cc: Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240726064337.797576-6-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit fd6797ec50c561f085bc94e3ee26f484a52af79e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-08Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-08-07 (ice) This series contains updates to ice driver only. Grzegorz adds IRQ synchronization call before performing reset and prevents writing to hardware when it is resetting. Mateusz swaps incorrect assignment of FEC statistics. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix incorrect assigns of FEC counts ice: Skip PTP HW writes during PTP reset procedure ice: Fix reset handler ==================== Link: https://patch.msgid.link/20240807224521.3819189-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-08net: dsa: microchip: disable EEE for KSZ8567/KSZ9567/KSZ9896/KSZ9897.Martin Whitaker
As noted in the device errata [1-8], EEE support is not fully operational in the KSZ8567, KSZ9477, KSZ9567, KSZ9896, and KSZ9897 devices, causing link drops when connected to another device that supports EEE. The patch series "net: add EEE support for KSZ9477 switch family" merged in commit 9b0bf4f77162 caused EEE support to be enabled in these devices. A fix for this regression for the KSZ9477 alone was merged in commit 08c6d8bae48c2. This patch extends this fix to the other affected devices. [1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ8567R-Errata-DS80000752.pdf [2] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ8567S-Errata-DS80000753.pdf [3] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9477S-Errata-DS80000754.pdf [4] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9567R-Errata-DS80000755.pdf [5] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9567S-Errata-DS80000756.pdf [6] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9896C-Errata-DS80000757.pdf [7] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9897R-Errata-DS80000758.pdf [8] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9897S-Errata-DS80000759.pdf Fixes: 69d3b36ca045 ("net: dsa: microchip: enable EEE support") # for KSZ8567/KSZ9567/KSZ9896/KSZ9897 Link: https://lore.kernel.org/netdev/137ce1ee-0b68-4c96-a717-c8164b514eec@martin-whitaker.me.uk/ Signed-off-by: Martin Whitaker <foss@martin-whitaker.me.uk> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Lukasz Majewski <lukma@denx.de> Link: https://patch.msgid.link/20240807205209.21464-1-foss@martin-whitaker.me.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-08net: ethtool: fix off-by-one error in max RSS context IDsEdward Cree
Both ethtool_ops.rxfh_max_context_id and the default value used when it's not specified are supposed to be exclusive maxima (the former is documented as such; the latter, U32_MAX, cannot be used as an ID since it equals ETH_RXFH_CONTEXT_ALLOC), but xa_alloc() expects an inclusive maximum. Subtract one from 'limit' to produce an inclusive maximum, and pass that to xa_alloc(). Increase bnxt's max by one to prevent a (very minor) regression, as BNXT_MAX_ETH_RSS_CTX is an inclusive max. This is safe since bnxt is not actually hard-limited; BNXT_MAX_ETH_RSS_CTX is just a leftover from old driver code that managed context IDs itself. Rename rxfh_max_context_id to rxfh_max_num_contexts to make its semantics (hopefully) more obvious. Fixes: 847a8ab18676 ("net: ethtool: let the core choose RSS context IDs") Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/5a2d11a599aa5b0cc6141072c01accfb7758650c.1723045898.git.ecree.xilinx@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-08net: pse-pd: tps23881: include missing bitfield.h headerArnd Bergmann
Using FIELD_GET() fails in configurations that don't already include the header file indirectly: drivers/net/pse-pd/tps23881.c: In function 'tps23881_i2c_probe': drivers/net/pse-pd/tps23881.c:755:13: error: implicit declaration of function 'FIELD_GET' [-Wimplicit-function-declaration] 755 | if (FIELD_GET(TPS23881_REG_DEVID_MASK, ret) != TPS23881_DEVICE_ID) { | ^~~~~~~~~ Fixes: 89108cb5c285 ("net: pse-pd: tps23881: Fix the device ID check") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20240807075455.2055224-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-08net: fec: Stop PPS on driver removeCsókás, Bence
PPS was not stopped in `fec_ptp_stop()`, called when the adapter was removed. Consequentially, you couldn't safely reload the driver with the PPS signal on. Fixes: 32cba57ba74b ("net: fec: introduce fec_ptp_stop and use in probe fail path") Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/netdev/CAOMZO5BzcZR8PwKKwBssQq_wAGzVgf1ffwe_nhpQJjviTdxy-w@mail.gmail.com/T/#m01dcb810bfc451a492140f6797ca77443d0cb79f Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20240807080956.2556602-1-csokas.bence@prolan.hu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-08net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilitiesFlorian Fainelli
Some Wake-on-LAN modes such as WAKE_FILTER may only be supported by the MAC, while others might be only supported by the PHY. Make sure that the .get_wol() returns the union of both rather than only that of the PHY if the PHY supports Wake-on-LAN. Fixes: 7e400ff35cbe ("net: bcmgenet: Add support for PHY-based Wake-on-LAN") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20240806175659.3232204-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-08net: stmmac: dwmac4: fix PCS duplex mode decodeRussell King (Oracle)
dwmac4 was decoding the duplex mode from the GMAC_PHYIF_CONTROL_STATUS register incorrectly, using GMAC_PHYIF_CTRLSTATUS_LNKMOD_MASK (value 1) rather than GMAC_PHYIF_CTRLSTATUS_LNKMOD (bit 16). Fix this. Fixes: 70523e639bf8c ("drivers: net: stmmac: reworking the PCS code.") Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1sbJvd-001rGD-E3@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-08platform/x86: ideapad-laptop: add a mutex to synchronize VPC commandsGergo Koteles
Calling VPC commands consists of several VPCW and VPCR ACPI calls. These calls and their results can get mixed up if they are called simultaneously from different threads, like acpi notify handler, sysfs, debugfs, notification chain. The commit e2ffcda16290 ("ACPI: OSL: Allow Notify () handlers to run on all CPUs") made the race issues much worse than before it but some races were possible even before that commit. Add a mutex to synchronize VPC commands. Fixes: e2ffcda16290 ("ACPI: OSL: Allow Notify () handlers to run on all CPUs") Fixes: e82882cdd241 ("platform/x86: Add driver for Yoga Tablet Mode switch") Signed-off-by: Gergo Koteles <soyer@irl.hu> Link: https://lore.kernel.org/r/f26782fa1194ad11ed5d9ba121a804e59b58b026.1721898747.git.soyer@irl.hu Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-08-08platform/x86: ideapad-laptop: move ymc_trigger_ec from lenovo-ymcGergo Koteles
Some models need to trigger the EC after each YMC event for the yoga mode control to work properly. EC triggering consist of a VPC call from the lenovo-ymc module. Except for this, all VPC calls are in the ideapad-laptop module. Since ideapad-laptop has a notification chain, a new YMC_EVENT action can be added and triggered from the lenovo-ymc module. Then the ideapad-laptop can trigger the EC. If the triggering is in the ideapad-laptop module, then the ec_trigger module parameter should be there as well. Move the ymc_trigger_ec functionality and the ec_trigger module parameter to the ideapad-laptop module. Signed-off-by: Gergo Koteles <soyer@irl.hu> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/d980ab3ac32b5e554f456b0ff17279bfdbe2a203.1721898747.git.soyer@irl.hu Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-08-08platform/x86: ideapad-laptop: introduce a generic notification chainGergo Koteles
There are several cases where a notification chain can simplify Lenovo WMI drivers. Add a generic notification chain into ideapad-laptop. Signed-off-by: Gergo Koteles <soyer@irl.hu> Link: https://lore.kernel.org/r/c5a43efae8a32bd034c3d19c0a686941347575a7.1721898747.git.soyer@irl.hu Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-08-08platform/x86/amd/pmf: Fix to Update HPD Data When ALS is DisabledShyam Sundar S K
If the Ambient Light Sensor (ALS) is disabled, the current code in the PMF driver does not query for Human Presence Detection (HPD) data in amd_pmf_get_sensor_info(). As a result, stale HPD data is used by PMF-TA to evaluate policy conditions, leading to unexpected behavior in the policy output actions. To resolve this issue, modify the PMF driver to query HPD data independently of ALS. Since user_present is a boolean, modify the current code to return true if the user is present and false if the user is away or if the sensor is not detected, and report this status to the PMF TA firmware accordingly. With this change, amd_pmf_get_sensor_info() now returns void instead of int. Fixes: cedecdba60f4 ("platform/x86/amd/pmf: Get ambient light information from AMD SFH driver") Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20240730142316.3846259-1-Shyam-sundar.S-k@amd.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-08-08soc: fsl: qbman: remove unused struct 'cgr_comp'Dr. David Alan Gilbert
'cgr_comp' has been unused since commit 96f413f47677 ("soc/fsl/qbman: fix issue in qman_delete_cgr_safe()"). Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240528231123.136664-1-linux@treblig.org
2024-08-08i2c: testunit: match HostNotify test name with docsWolfram Sang
Ensure the test has the same name in the code as it has in the docs. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2024-08-07Merge tag 'for-net-2024-08-07' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - hci_sync: avoid dup filtering when passive scanning with adv monitor - hci_qca: don't call pwrseq_power_off() twice for QCA6390 - hci_qca: fix QCA6390 support on non-DT platforms - hci_qca: fix a NULL-pointer derefence at shutdown - l2cap: always unlock channel in l2cap_conless_channel() * tag 'for-net-2024-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitor Bluetooth: l2cap: always unlock channel in l2cap_conless_channel() Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdown Bluetooth: hci_qca: fix QCA6390 support on non-DT platforms Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390 ==================== Link: https://patch.msgid.link/20240807210103.142483-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-07idpf: fix UAFs when destroying the queuesAlexander Lobakin
The second tagged commit started sometimes (very rarely, but possible) throwing WARNs from net/core/page_pool.c:page_pool_disable_direct_recycling(). Turned out idpf frees interrupt vectors with embedded NAPIs *before* freeing the queues making page_pools' NAPI pointers lead to freed memory before these pools are destroyed by libeth. It's not clear whether there are other accesses to the freed vectors when destroying the queues, but anyway, we usually free queue/interrupt vectors only when the queues are destroyed and the NAPIs are guaranteed to not be referenced anywhere. Invert the allocation and freeing logic making queue/interrupt vectors be allocated first and freed last. Vectors don't require queues to be present, so this is safe. Additionally, this change allows to remove that useless queue->q_vector pointer cleanup, as vectors are still valid when freeing the queues (+ both are freed within one function, so it's not clear why nullify the pointers at all). Fixes: 1c325aac10a8 ("idpf: configure resources for TX queues") Fixes: 90912f9f4f2d ("idpf: convert header split mode to libeth + napi_build_skb()") Reported-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240806220923.3359860-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-07idpf: fix memleak in vport interrupt configurationMichal Kubiak
The initialization of vport interrupt consists of two functions: 1) idpf_vport_intr_init() where a generic configuration is done 2) idpf_vport_intr_req_irq() where the irq for each q_vector is requested. The first function used to create a base name for each interrupt using "kasprintf()" call. Unfortunately, although that call allocated memory for a text buffer, that memory was never released. Fix this by removing creating the interrupt base name in 1). Instead, always create a full interrupt name in the function 2), because there is no need to create a base name separately, considering that the function 2) is never called out of idpf_vport_intr_init() context. Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport") Cc: stable@vger.kernel.org # 6.7 Signed-off-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240806220923.3359860-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-07idpf: fix memory leaks and crashes while performing a soft resetAlexander Lobakin
The second tagged commit introduced a UAF, as it removed restoring q_vector->vport pointers after reinitializating the structures. This is due to that all queue allocation functions are performed here with the new temporary vport structure and those functions rewrite the backpointers to the vport. Then, this new struct is freed and the pointers start leading to nowhere. But generally speaking, the current logic is very fragile. It claims to be more reliable when the system is low on memory, but in fact, it consumes two times more memory as at the moment of running this function, there are two vports allocated with their queues and vectors. Moreover, it claims to prevent the driver from running into "bad state", but in fact, any error during the rebuild leaves the old vport in the partially allocated state. Finally, if the interface is down when the function is called, it always allocates a new queue set, but when the user decides to enable the interface later on, vport_open() allocates them once again, IOW there's a clear memory leak here. Just don't allocate a new queue set when performing a reset, that solves crashes and memory leaks. Readd the old queue number and reopen the interface on rollback - that solves limbo states when the device is left disabled and/or without HW queues enabled. Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks") Fixes: e4891e4687c8 ("idpf: split &idpf_queue into 4 strictly-typed queue structures") Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240806220923.3359860-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-07bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl()Michael Chan
A recent commit has modified the code in __bnxt_reserve_rings() to set the default RSS indirection table to default only when the number of RX rings is changing. While this works for newer firmware that requires RX ring reservations, it causes the regression on older firmware not requiring RX ring resrvations (BNXT_NEW_RM() returns false). With older firmware, RX ring reservations are not required and so hw_resc->resv_rx_rings is not always set to the proper value. The comparison: if (old_rx_rings != bp->hw_resc.resv_rx_rings) in __bnxt_reserve_rings() may be false even when the RX rings are changing. This will cause __bnxt_reserve_rings() to skip setting the default RSS indirection table to default to match the current number of RX rings. This may later cause bnxt_fill_hw_rss_tbl() to use an out-of-range index. We already have bnxt_check_rss_tbl_no_rmgr() to handle exactly this scenario. We just need to move it up in bnxt_need_reserve_rings() to be called unconditionally when using older firmware. Without the fix, if the TX rings are changing, we'll skip the bnxt_check_rss_tbl_no_rmgr() call and __bnxt_reserve_rings() may also skip the bnxt_set_dflt_rss_indir_tbl() call for the reason explained in the last paragraph. Without setting the default RSS indirection table to default, it causes the regression: BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40 Read of size 2 at addr ffff8881c5809618 by task ethtool/31525 Call Trace: __bnxt_hwrm_vnic_set_rss+0xb79/0xe40 bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460 __bnxt_setup_vnic_p5+0x12e/0x270 __bnxt_open_nic+0x2262/0x2f30 bnxt_open_nic+0x5d/0xf0 ethnl_set_channels+0x5d4/0xb30 ethnl_default_set_doit+0x2f1/0x620 Reported-by: Breno Leitao <leitao@debian.org> Closes: https://lore.kernel.org/netdev/ZrC6jpghA3PWVWSB@gmail.com/ Fixes: 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Tested-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20240806053742.140304-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-07net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register()Joe Hattori
bcm_sf2_mdio_register() calls of_phy_find_device() and then phy_device_remove() in a loop to remove existing PHY devices. of_phy_find_device() eventually calls bus_find_device(), which calls get_device() on the returned struct device * to increment the refcount. The current implementation does not decrement the refcount, which causes memory leak. This commit adds the missing phy_device_free() call to decrement the refcount via put_device() to balance the refcount. Fixes: 771089c2a485 ("net: dsa: bcm_sf2: Ensure that MDIO diversion is used") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20240806011327.3817861-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-07spi: spi-fsl-lpspi: Fix scldiv calculationStefan Wahren
The effective SPI clock frequency should never exceed speed_hz otherwise this might result in undefined behavior of the SPI device. Currently the scldiv calculation could violate this constraint. For the example parameters perclk_rate = 24 MHz and speed_hz = 7 MHz, the function fsl_lpspi_set_bitrate will determine perscale = 0 and scldiv = 1, which is a effective SPI clock of 8 MHz. So fix this by rounding up the quotient of perclk_rate and speed_hz. While this never change within the loop, we can pull this out. Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://patch.msgid.link/20240804113611.83613-1-wahrenst@gmx.net Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-07drm/amdgpu: Add DCC GFX12 flag to enable address alignmentArunpravin Paneer Selvam
We require this flag AMDGPU_GEM_CREATE_GFX12_DCC or any other kernel level GFX12 DCC flag to differentiate the DCC buffers and other pinned display buffers(which has TTM_PL_FLAG_CONTIGUOUS enabled). If we use the TTM_PL_FLAG_CONTIGUOUS flag for DCC buffers, we may over allocate for all the pinned display buffers unnecessarily that leads to memory allocation failure. Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 46142cc1b9272d664e0258e105b537735bfeeccc)
2024-08-07drm/amdgpu: correct sdma7 max dwFrank Min
correct sdma7 max dw into 8 Signed-off-by: Frank Min <Frank.Min@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 86598c3819fdc70e59d28221bfa7bc36e9f5777e)
2024-08-07drm/amdgpu: Add address alignment support to DCC buffersArunpravin Paneer Selvam
Add address alignment support to the DCC VRAM buffers. v2: - adjust size based on the max_texture_channel_caches values only for GFX12 DCC buffers. - used AMDGPU_GEM_CREATE_GFX12_DCC flag to apply change only for DCC buffers. - roundup non power of two DCC buffer adjusted size to nearest power of two number as the buddy allocator does not support non power of two alignments. This applies only to the contiguous DCC buffers. v3:(Alex) - rewrite the max texture channel caches comparison code in an algorithmic way to determine the alignment size. v4:(Alex) - Move the logic from amdgpu_vram_mgr_dcc_alignment() to gmc_v12_0.c and add a new gmc func callback for dcc alignment. If the callback is non-NULL, call it to get the alignment, otherwise, use the default. v5:(Alex) - Set the Alignment to a default value if the callback doesn't exist. - Add the callback to amdgpu_gmc_funcs. v6: - Fix checkpatch warning reported by Intel CI. v7:(Christian) - remove the AMDGPU_GEM_CREATE_GFX12_DCC flag and keep a flag that checks the BO pinning and for a specific hw generation. v8:(Christian) - move this check into gmc_v12_0_get_dcc_alignment. v9: - Fix 32bit build errors Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit aa94b623cb9233b91ed342dd87ecd62e56ff4938)
2024-08-07drm/amd/display: Skip Recompute DSC Params if no Stream on LinkFangzhi Zuo
[why] Encounter NULL pointer dereference uner mst + dsc setup. BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2 Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022 RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? plist_add+0xbe/0x100 ? exc_page_fault+0x7c/0x180 ? asm_exc_page_fault+0x26/0x30 ? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] ? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] ? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] drm_atomic_check_only+0x5c5/0xa40 drm_mode_atomic_ioctl+0x76e/0xbc0 [how] dsc recompute should be skipped if no mode change detected on the new request. If detected, keep checking whether the stream is already on current state or not. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 8151a6c13111b465dbabe07c19f572f7cbd16fef)
2024-08-07drm/amdgpu: change non-dcc buffer copy configurationFrank Min
Without setting cpv bit and 7th ib dw, non-dcc buffer copy will have random corruption So set the cpv bit and clear the 7th ib dw for copy non-dcc buffers Signed-off-by: Frank Min <Frank.Min@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 5aacf8917fde5bc2a640f3cd49130c0e2e85e726)
2024-08-07drm/amdgpu: Forward soft recovery errors to userspaceJoshua Ashton
As we discussed before[1], soft recovery should be forwarded to userspace, or we can get into a really bad state where apps will keep submitting hanging command buffers cascading us to a hard reset. 1: https://lore.kernel.org/all/bf23d5ed-9a6b-43e7-84ee-8cbfd0d60f18@froggi.es/ Signed-off-by: Joshua Ashton <joshua@froggi.es> Reviewed-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 434967aadbbbe3ad9103cc29e9a327de20fdba01) Cc: stable@vger.kernel.org
2024-08-07drm/amdgpu: add golden setting for gc v12Likun Gao
Adding Manual GDB golden setting for gc v12 revision 0 ASIC. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit c9875d0a789060facc274dee0d4eb6500d471772)
2024-08-07drm/buddy: Add start address support to trim functionArunpravin Paneer Selvam
- Add a new start parameter in trim function to specify exact address from where to start the trimming. This would help us in situations like if drivers would like to do address alignment for specific requirements. - Add a new flag DRM_BUDDY_TRIM_DISABLE. Drivers can use this flag to disable the allocator trimming part. This patch enables the drivers control trimming and they can do it themselves based on the application requirements. v1:(Matthew) - check new_start alignment with min chunk_size - use range_overflows() Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit db65eb46de135338d6177f8853e0fd208f19d63e)
2024-08-07drm/amd/display: Add missing program DET segment call to pipe initRodrigo Siqueira
Add a callback that program the DET segment when initializing pipes. Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit e1dbe625d6ac2821eb29e087db46cb539d8079f0)
2024-08-07drm/amd/display: Add missing DCN314 to the DML MakefileRodrigo Siqueira
Include display_mode_vba_314 and display_rq_dlg_calc_314 to the dml Makefile. Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 089525632d40bbfa507f224c20563529b3f8a4b3)
2024-08-07drm/amdgpu: force to use legacy inv in mmhubLikun Gao
MMHUB v4.1.0 only support fixed cache mode, so only use legacy invalidation accordingly. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 9192c7613ca53572908ba23a4c3f39c7f8ba8021)
2024-08-07drm/amd/pm: update powerplay structure on smu v14.0.2/3Kenneth Feng
update powerplay structure on smu v14.0.2/3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit f905d0c328b440fabaaf265350bf4187ccd5f59b)
2024-08-07drm/amd/display: Add missing mcache registersRodrigo Siqueira
Add missing register programming for mcache in DCN401. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit a00a177055cced5cd2bb057a1ace9a95a286bc49)
2024-08-07drm/amd/display: Add dcc propagation valueRodrigo Siqueira
Initialize the field dcc_meta_propagation_delay_us with 10 ms. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 74bad61c5d83f5af8a855c8b7dc8e20377c74d46)
2024-08-07drm/amd/display: Add missing DET segments programmingRodrigo Siqueira
The commit 5034b935f62a ("drm/amd/display: Modify DHCUB waterwark structures and functions") introduced a code refactor for DCHUB, but during the merge process into amd-staging-drm-next, the program det segments were removed. This commit adds the DET segment programming for DCN35. Fixes: 5034b935f62a ("drm/amd/display: Modify DHCUB waterwark structures and functions") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 675d9ac9d0de765531e94f9fdc536989a997a324)
generated by cgit (git 2.34.1) at 2025-09-11 08:33:14 +0000